Hello Adam,
On 8/24/23 23:54, Andrew Rybchenko wrote:
I'd like to try to repeat the problem locally. Which Linux distro is running on test engine and agents?
In fact I know one problem with Debian 12 and Fedora 38 and we have
patch in review to fix it, however, the behaviour is different in
this case, so it is unlike the same problem.
I've just published a new tag which fixes known test engine side problems on Debian 12 and Fedora 38.
One more idea is to install valgrind on the test engine host and
run with option --vg-rcf to check if something weird is happening.
What I don't understand right now is why I see just one failed attempt
to connect in your log.txt and then Logger shutdown after 9 minutes.
Andrew.
On 8/24/23 23:29, Adam Hassick wrote:
> Is there any firewall in the network or on test hosts which could block incoming TCP connection to the port 23571 <http://iol-dts-tester.dpdklab.iol.unh.edu:23571> from the host where you run test engine?
Our test engine host and the testbed are on the same subnet. The connection does work sometimes.
> If behaviour the same on the next try and you see that test agent is kept running, could you check using
>
> # netstat -tnlp
>
> that Test Agent is listening on the port and try to establish TCP connection from test agent using
>
> $ telnet iol-dts-tester.dpdklab.iol.unh.edu <http://iol-dts-tester.dpdklab.iol.unh.edu:23571> 23571 <http://iol-dts-tester.dpdklab.iol.unh.edu:23571>
>
> and check if TCP connection could be established.
I was able to replicate the same behavior again, where it hangs while RCF is trying to start.
Running this command, I see this in the output:
tcp 0 0 0.0.0.0:23571 <http://0.0.0.0:23571> 0.0.0.0:* LISTEN 18599/ta
So it seems like it is listening on the correct port.
Additionally, I was able to connect to the Tester machine from our Test Engine host using telnet. It printed the PID of the process once the connection was opened.
I tried running the "ta" application manually on the command line, and it didn't print anything at all.
Maybe the issue is something on the Test Engine side.
On Thu, Aug 24, 2023 at 2:35 PM Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru <mailto:andrew.rybchenko@oktetlabs.ru>> wrote:
Hi Adam,
> On the tester host (which appears to be the Peer agent), there
are four processes that I see running, which look like the test
agent processes.
Before the next try I'd recommend to kill these processes.
Is there any firewall in the network or on test hosts which could
block incoming TCP connection to the port 23571
<http://iol-dts-tester.dpdklab.iol.unh.edu:23571> from the host
where you run test engine?
If behaviour the same on the next try and you see that test agent is
kept running, could you check using
# netstat -tnlp
that Test Agent is listening on the port and try to establish TCP
connection from test agent using
$ telnet iol-dts-tester.dpdklab.iol.unh.edu
<http://iol-dts-tester.dpdklab.iol.unh.edu:23571> 23571
<http://iol-dts-tester.dpdklab.iol.unh.edu:23571>
and check if TCP connection could be established.
Another idea is to login Tester under root as testing does, get
start TA command from the log and try it by hands without -n and
remove extra escaping.
# sudo PATH=${PATH}:/tmp/linux_x86_root_76872_1692885663_1
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}${LD_LIBRARY_PATH:+:}/tmp/linux_x86_root_76872_1692885663_1 /tmp/linux_x86_root_76872_1692885663_1/ta Peer 23571 host=iol-dts-tester.dpdklab.iol.unh.edu:port=23571:user=root:key=/opt/tsf/keys/id_ed25519:ssh_port=22:copy_timeout=15:kill_timeout=15:sudo=:shell=
Hopefully in this case test agent directory remains in the /tmp and
you don't need to copy it as testing does.
May be output could shed some light on what's going on.
Andrew.
On 8/24/23 17:30, Adam Hassick wrote:
Hi Andrew,
This is the output that I see in the terminal when this failure
occurs, after the test agent binaries build and the test engine
starts:
Platform default build - pass
Simple RCF consistency check succeeded
--->>> Starting Logger...done
--->>> Starting RCF...rcf_net_engine_connect(): Connection timed
out iol-dts-tester.dpdklab.iol.unh.edu:23571
<http://iol-dts-tester.dpdklab.iol.unh.edu:23571>
Then, it hangs here until I kill the "te_rcf" and "te_tee"
processes. I let it hang for around 9 minutes.
On the tester host (which appears to be the Peer agent), there are
four processes that I see running, which look like the test agent
processes.
ta.Peer is an empty file. I've attached the log.txt from this run.
- Adam
On Thu, Aug 24, 2023 at 4:22 AM Andrew Rybchenko
<andrew.rybchenko@oktetlabs.ru
<mailto:andrew.rybchenko@oktetlabs.ru>> wrote:
Hi Adam,
Yes, TE_RCFUNIX_TIMEOUT is in seconds. I've double-checked
that it goes to 'copy_timeout' in ts-conf/rcf.conf.
Description in in doc/sphinx/pages/group_te_engine_rcf.rst
says that copy_timeout is in seconds and implementation in
lib/rcfunix/rcfunix.c passes the value to select() tv_sec.
Theoretically select() could be interrupted by signal, but I
think it is unlikely here.
I'm not sure that I understand what do you mean by RCF
connection timeout. Does it happen on TE startup when RCF
starts test agents. If so, TE_RCFUNIX_TIMEOUT could help. Or
does it happen when tests are in progress, e.g. in the middle
of a test. If so, TE_RCFUNIX_TIMEOUT is unrelated and most
likely either host with test agent dies or test agent itself
crashes. It would be easier for me if classify it if you share
text log (log.txt, full or just corresponding fragment with
some context). Also content of ta.DPDK or ta.Peer file
depending on which agent has problems could shed some light.
Corresponding files contain stdout/stderr of test agents.
Andrew.
On 8/23/23 17:45, Adam Hassick wrote:
Hi Andrew,
I've set up a test rig repository here, and have created
configurations for our development testbed based off of the
examples.
We've been able to get the test suite to run manually on
Mellanox CX5 devices once.
However, we are running into an issue where, when RCF starts,
the RCF connection times out very frequently. We aren't sure
why this is the case.
It works sometimes, but most of the time when we try to run
the test engine, it encounters this issue.
I've tried changing the RCF port by setting
"TE_RCF_PORT=<some port number>" and rebooting the testbed
machines. Neither seems to fix the issue.
It also seems like the timeout takes far longer than 60
seconds, even when running "export TE_RCFUNIX_TIMEOUT=60"
before I try to run the test suite.
I assume the unit for this variable is seconds?
Thanks,
Adam
On Mon, Aug 21, 2023 at 10:19 AM Adam Hassick
<ahassick@iol.unh.edu <mailto:ahassick@iol.unh.edu>> wrote:
Hi Andrew,
Thanks, I've cloned the example repository and will start
setting up a configuration for our development testbed
today. I'll let you know if I run into any difficulties
or have any questions.
- Adam
On Sun, Aug 20, 2023 at 4:40 AM Andrew Rybchenko
<andrew.rybchenko@oktetlabs.ru
<mailto:andrew.rybchenko@oktetlabs.ru>> wrote:
Hi Adam,
I've published
https://github.com/ts-factory/ts-rigs-sample
<https://github.com/ts-factory/ts-rigs-sample>.
Hopefully it will help to define your test rigs and
successfully run some tests manually. Feel free to
ask any questions and I'll answer here and try to
update documentation.
Meanwhile I'll prepare missing bits for steps (2) and
(3).
Hopefully everything is in place for step (4), but we
need to make steps (2) and (3) first.
Andrew.
On 8/18/23 21:40, Andrew Rybchenko wrote:
Hi Adam,
> I've conferred with the rest of the team, and we
think it would be best to move forward with mainly
option B.
OK, I'll provide the sample on Monday for you. It is
almost ready right now, but I need to double-check
it before publishing.
Regards,
Andrew.
On 8/17/23 20:03, Adam Hassick wrote:
Hi Andrew,
I'm adding the CI mailing list to this
conversation. Others in the community might find
this conversation valuable.
We do want to run testing on a regular basis. The
Jenkins integration will be very useful for us, as
most of our CI is orchestrated by Jenkins.
I've conferred with the rest of the team, and we
think it would be best to move forward with mainly
option B.
If you would like to know anything about our
testbeds that would help you with creating an
example ts-rigs repo, I'd be happy to answer any
questions you have.
We have multiple test rigs (we call these
"DUT-tester pairs") that we run our existing
hardware testing on, with differing network
hardware and CPU architecture. I figured this might
be an important detail.
Thanks,
Adam
On Thu, Aug 17, 2023 at 11:44 AM Andrew Rybchenko
<andrew.rybchenko@oktetlabs.ru
<mailto:andrew.rybchenko@oktetlabs.ru>> wrote:
Greatings Adam,
I'm happy to hear that you're trying to bring
it up.
As I understand the final goal is to run it on
regular basis. So, we need to make it properly
from the very beginning.
Bring up of all features consists of 4 steps:
1. Create site-specific repository (we call it
ts-rigs) which contains information about test
rigs and other site-specific information like
where to send mails, where to store logs etc.
It is required for manual execution as well,
since test rigs description is essential. I'll
return to the topic below.
2. Setup logs storage for automated runs.
Basically it is a disk space plus apache2 web
server with few CGI scripts which help a lot to
save disk space.
3. Setup Bublik web application which provides
web interface to view testing results. Same as
https://ts-factory.io/bublik
<https://ts-factory.io/bublik>
4. Setup Jenkins to run tests on regularly,
save logs in log storage (2) and import it to
bublik (3).
Last few month we spent on our homework to make
it simpler to bring up automated execution
using Jenkins -
https://github.com/ts-factory/te-jenkins
<https://github.com/ts-factory/te-jenkins>
Corresponding bits in dpdk-ethdev-ts will be
available tomorrow.
Let's return to the step (1).
Unfortunately there is no publicly available
example of the ts-rigs repository since
sensitive site-specific information is located
there. But I'm ready to help you to create it
for UNH. I see two options here:
(A) I'll ask questions and based on your
answers will create the first draft with my
comments.
(B) I'll make a template/example ts-rigs repo,
publish it and you'll create UNH ts-rigs based
on it.
Of course, I'll help to debug and finally bring
it up in any case.
(A) is a bit simpler for me and you, but (B) is
a bit more generic and will help other
potential users to bring it up.
We can combine (A)+(B). I.e. start from (A).
What do you think?
Thanks,
Andrew.
On 8/17/23 15:18, Konstantin Ushakov wrote:
Greetings Adam,
Thanks for contacting us. I copy Andrew who
would be happy to help
Thanks,
Konstantin
On 16 Aug 2023, at 21:50, Adam Hassick
<ahassick@iol.unh.edu>
<mailto:ahassick@iol.unh.edu> wrote:
Greetings Konstantin,
I am in the process of setting up the DPDK
Poll Mode Driver test suite as an addition to
our testing coverage for DPDK at the UNH lab.
I have some questions about how to set the
test suite arguments.
I have been able to configure the Test Engine
to connect to the hosts in the testbed. The
RCF, Configurator, and Tester all begin to
run, however the prelude of the test suite
fails to run.
https://ts-factory.io/doc/dpdk-ethdev-ts/index.html#test-parameters <https://ts-factory.io/doc/dpdk-ethdev-ts/index.html#test-parameters>
The documentation mentions that there are
several test parameters for the test suite,
like for the IUT test link MAC, etc. These
seem like they would need to be set somewhere
to run many of the tests.
I see in the Test Engine documentation, there
are instructions on how to create new
parameters for test suites in the Tester
configuration, but there is nothing in the
user guide or in the Tester guide for how to
set the arguments for the parameters when
running the test suite that I can find. I'm
not sure if I need to write my own Tester
config, or if I should be setting these in
some other way.
How should these values be set?
I'm also not sure what environment
variables/arguments are strictly necessary or
which are optional.
Regards,
Adam
-- *Adam Hassick*
Senior Developer
UNH InterOperability Lab
ahassick@iol.unh.edu
<mailto:ahassick@iol.unh.edu>
iol.unh.edu <https://www.iol.unh.edu/>
+1 (603) 475-8248
-- *Adam Hassick*
Senior Developer
UNH InterOperability Lab
ahassick@iol.unh.edu <mailto:ahassick@iol.unh.edu>
iol.unh.edu <https://www.iol.unh.edu/>
+1 (603) 475-8248
-- *Adam Hassick*
Senior Developer
UNH InterOperability Lab
ahassick@iol.unh.edu <mailto:ahassick@iol.unh.edu>
iol.unh.edu <https://www.iol.unh.edu/>
+1 (603) 475-8248
-- *Adam Hassick*
Senior Developer
UNH InterOperability Lab
ahassick@iol.unh.edu <mailto:ahassick@iol.unh.edu>
iol.unh.edu <https://www.iol.unh.edu/>
+1 (603) 475-8248
-- *Adam Hassick*
Senior Developer
UNH InterOperability Lab
ahassick@iol.unh.edu <mailto:ahassick@iol.unh.edu>
iol.unh.edu <https://www.iol.unh.edu/>
+1 (603) 475-8248
--
*Adam Hassick*
Senior Developer
UNH InterOperability Lab
ahassick@iol.unh.edu <mailto:ahassick@iol.unh.edu>
iol.unh.edu <https://www.iol.unh.edu/>
+1 (603) 475-8248