Adam Hassick <ahassick@iol.unh.edu> writes:

> From: Owen Hilyard <ohilyard@iol.unh.edu>
>
> The Makefile that can be used to build all of the container images using
> "make build", and can also be used to push them to a remote repository
> (for use in CI).
>
> Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
> Signed-off-by: Adam Hassick <ahassick@iol.unh.edu>
> ---
>  containers/Makefile | 258 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 258 insertions(+)
>  create mode 100644 containers/Makefile
>
> diff --git a/containers/Makefile b/containers/Makefile
> new file mode 100644
> index 0000000..047a208
> --- /dev/null
> +++ b/containers/Makefile
> @@ -0,0 +1,258 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright (c) 2023 University of New Hampshire
> +
> +# Recommended Resources:
> +#    All:
> +#            ~100 GB of disk space: These are not minimal containers, they
> +#                                                       have full distros in them minus the kernel.
> +#                                                       With ABI images, expect 10 GB per distro per
> +#                                                       platform. Without, it's closer to 2 GB per distro
> +#                                                       per platform.
> +#
> +#    No ABI:
> +#            Serial Build (make -j 1): Should run on a laptop.
> +#            Parallel build (make -j $(nproc)): 1 GB of free ram per job should be good enough.
> +#    ABI:
> +#            Time: If you are building more than four distros, or you have one distro that is built under
> +#                      emulation (x86 host + arm container or the inverse), it may be best to run it overnight.
> +#                      Some versions of qemu + podman will try to compile with a single thread under emulation,
> +#                      which can cause what should be an hour-long compile to turn into a 8+ hour compile.
> +#            Serial Build (make -j 1): 6 GB of free ram should be fine
> +#    Parallel build (make -j $(nproc)): 6 GB of free ram per job. You may be compiling ~20 versions of DPDK at the same time, with some under emulation.
> +#
> +
> +
> +############ Arguments #############
> +# Set to 'Y' to override distro detection
> +DPDK_CI_CONTAINERS_ON_RHEL?=$(shell (test -f /etc/redhat-release && grep -q 'Red Hat Enterprise Linux' /etc/redhat-release && echo 'Y') || echo 'N')
> +
> +# If set to 'Y' and any container is detected as unbuildable, fail the build.
> +DPDK_CI_CONTAINERS_FAIL_ON_UNBUILDABLE?=N
> +
> +# If set to 'Y', build the ABIs for specificed DPDK versions and embed them

If you agree, I can fix this to specified when committing to the repo.

> +# in the container
> +DPDK_CI_CONTAINERS_BUILD_ABI?=N
> +
> +# If set to 'Y', the "latest" tag for all images will be omitted. Intended for testing changes to your inventory.
> +DPDK_CI_CONTAINERS_NO_LATEST_TAG?=N
> +
> +# If set to 'Y', will build containers that rely on the Coverity Scan tool.
> +DPDK_CI_CONTAINERS_COVERITY?=N
> +
> +# The path to Coverity Scan binaries. These will be installed inside the container.
> +# This field is only required if the Coverity flag is enabled.
> +# DPDK_CI_CONTAINERS_COVERITY_PATH?=/opt/dpdklab/coverity
> +
> +# If set to a non-empty value, overrides the auto-generated date tag with the value.
> +# DPDK_CI_CONTAINERS_DATE_TAG_OVERRIDE=70-01-01
> +
> +# If set to 'Y', build libabigail from source for distros that do not have it.
> +# If DPDK_CI_CONTAINERS_BUILD_ABI='Y', then this is always enabled.
> +ifeq ($(DPDK_CI_CONTAINERS_BUILD_ABI), Y)
> +DPDK_CI_CONTAINERS_BUILD_LIBABIGAIL=Y
> +else
> +DPDK_CI_CONTAINERS_BUILD_LIBABIGAIL?=N
> +endif
> +
> +# If set to an integer value, this will restrict the count of Ninja workers performing the ABI build to the given integer.
> +# The argument is benign if DPDK_CI_CONTANERS_BUILD_ABI is 'N'.
> +# DPDK_CI_CONTAINERS_NINJA_WORKERS?=16
> +
> +# If set to 'Y', only build containers matching the host architecture
> +DPDK_CI_CONTAINERS_ONLY_HOST_ARCH?=N
> +
> +# If set to 'Y', assumes only host arch and disables the push_manifests target.
> +DPDK_CI_CONTAINERS_IS_BUILDER?=N
> +
> +# Used to set the python interpreter
> +DPDK_CI_CONTAINERS_PYTHON3_CMD?=python3.8
> +
> +# The base program to use to build individual containers.
> +DPDK_CI_CONTAINER_BUILDER_PROGRAM?=podman
> +
> +# The url of the git repository to pull libabigail from
> +DPDK_CI_CONTAINERS_LIBABIGAIL_CLONE_URL?=git://sourceware.org/git/libabigail.git
> +
> +# The url of the git repository to pull DPDK from
> +DPDK_CI_CONTAINERS_DPDK_CLONE_URL?=https://dpdk.org/git/dpdk
> +
> +# The url of the git repository to pull the DPDK CI scripts from.
> +DPDK_CI_CONTAINERS_DPDK_CI_CLONE_URL?=https://dpdk.org/git/tools/dpdk-ci
> +
> +# The url of the git repository to pull DPDK stable from
> +DPDK_CI_CONTAINERS_DPDK_STABLE_CLONE_URL?=https://dpdk.org/git/dpdk-stable
> +
> +# The tag to apply to the built container builder image
> +DPDK_CI_CONTAINERS_CONTAINER_BUILDER_TAG?=dpdk_ci_container_builder
> +
> +# Extra arguments to add to the push command, can be used for credentials
> +DPDK_CI_CONTAINERS_EXTRA_PUSH_ARGS?=
> +
> +# Provide the hostname of the registry to push up to
> +DPDK_CI_CONTAINERS_REGISTRY_HOSTNAME?=localhost
> +
> +# The path to a directory to be recursively copied to $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY). Not used if unset.
> +#DPDK_CI_CONTAINERS_EXTRA_SCRIPTS_PATH?=
> +
> +DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY?=$(CURDIR)/container_context
> +############ End Arguments #############
> +
> +############ Internal Variables #############
> +SCRIPT_ARGS=--output-dir "$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)"
> +
> +ifeq ($(DPDK_CI_CONTAINERS_ON_RHEL), Y)
> +     SCRIPT_ARGS +=--rhel
> +endif
> +
> +ifeq ($(DPDK_CI_CONTAINERS_FAIL_ON_UNBUILDABLE), Y)
> +     SCRIPT_ARGS +=--fail-on-unbuildable
> +endif
> +
> +ifeq ($(DPDK_CI_CONTAINERS_BUILD_ABI), Y)
> +     SCRIPT_ARGS +=--build-abi
> +endif
> +
> +ifeq ($(DPDK_CI_CONTAINERS_BUILD_LIBABIGAIL), Y)
> +     SCRIPT_ARGS +=--build-libabigail
> +endif
> +
> +ifeq ($(DPDK_CI_CONTAINERS_ONLY_HOST_ARCH), Y)
> +     SCRIPT_ARGS +=--host-arch-only
> +endif
> +
> +ifeq ($(DPDK_CI_CONTAINERS_NO_LATEST_TAG), Y)
> +     SCRIPT_ARGS +=--omit-latest
> +endif
> +
> +ifeq ($(DPDK_CI_CONTAINERS_IS_BUILDER), Y)
> +     SCRIPT_ARGS +=--builder-mode
> +endif
> +
> +ifneq ($(DPDK_CI_CONTAINERS_DATE_TAG_OVERRIDE),)
> +     SCRIPT_ARGS +=--date $(DPDK_CI_CONTAINERS_DATE_TAG_OVERRIDE)
> +endif
> +
> +ifneq ($(DPDK_CI_CONTAINERS_NINJA_WORKERS),)
> +     SCRIPT_ARGS +=--ninja-workers $(DPDK_CI_CONTAINERS_NINJA_WORKERS)
> +endif
> +
> +ifeq ($(DPDK_CI_CONTAINERS_COVERITY), Y)
> +     SCRIPT_ARGS +=--coverity
> +endif
> +
> +SCRIPT_DIRECTORY=$(CURDIR)/template_engine
> +
> +LIBABIGAIL_DIRECTORY=$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/libabigail
> +DPDK_DIRECTORY=$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/dpdk
> +DPDK_CI_DIRECTORY=$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/dpdk-ci
> +DPDK_STABLE_DIRECTORY=$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/dpdk-stable
> +
> +DOCKERFILE=$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/Dockerfile
> +
> +MAKE_DOCKERFILE_SCRIPT=$(SCRIPT_DIRECTORY)/make_dockerfile.py
> +MAKE_DOCKERFILE_COMMAND=$(DPDK_CI_CONTAINERS_PYTHON3_CMD) $(MAKE_DOCKERFILE_SCRIPT)
> +
> +TEMPLATE_FILE_DIRECTORY=$(SCRIPT_DIRECTORY)/templates
> +DOCKER_CONTAINER_TEMPLATE_DIR=$(TEMPLATE_FILE_DIRECTORY)/containers
> +
> +INVENTORY_FILE=$(SCRIPT_DIRECTORY)/inventory.yaml
> +
> +EXTRA_SCRIPTS_DIRECTORY=$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/scripts
> +
> +COVERITY_DIRECTORY=$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/coverity
> +
> +GIT_FETCH_ARGS=--all --tags
> +
> +CONTAINER_BUILDER_DOCKERFILE=$(CURDIR)/container_builder.dockerfile
> +
> +export
> +############ End Internal Variables #############
> +
> +.PHONY: build push push_images push_manifests make_docker_files_in_container build_builder_container docker_deps extra_scripts libabigail dpdk dpdk-ci coverity clean_container_files clean
> +
> +build: make_docker_files_in_container external_files
> +     $(MAKE) -C $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) build_all
> +
> +push_images: make_docker_files_in_container external_files
> +     $(MAKE) -C $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) push_image_all
> +
> +push_manifests: make_docker_files_in_container
> +     $(MAKE) -C $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) push_manifest_all
> +
> +push: push_images push_manifests
> +
> +make_docker_files_in_container: build_builder_container $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)
> +     $(DPDK_CI_CONTAINER_BUILDER_PROGRAM) run --rm -v $(CURDIR):/container_workspace:z -v $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY):/container_workspace/container_context:z \
> +             -e DPDK_CI_CONTAINERS_ON_RHEL=$(DPDK_CI_CONTAINERS_ON_RHEL) \
> +             -e DPDK_CI_CONTAINERS_BUILD_LIBABIGAIL=$(DPDK_CI_CONTAINERS_BUILD_LIBABIGAIL) \
> +             -e DPDK_CI_CONTAINERS_BUILD_ABI=$(DPDK_CI_CONTAINERS_BUILD_ABI) \
> +             -e DPDK_CI_CONTAINERS_FAIL_ON_UNBUILDABLE=$(DPDK_CI_CONTAINERS_FAIL_ON_UNBUILDABLE) \
> +             -e DPDK_CI_CONTAINERS_REGISTRY_HOSTNAME='$(DPDK_CI_CONTAINERS_REGISTRY_HOSTNAME)' \
> +             -e DPDK_CI_CONTAINERS_ONLY_HOST_ARCH='$(DPDK_CI_CONTAINERS_ONLY_HOST_ARCH)' \
> +             -e DPDK_CI_CONTAINERS_NO_LATEST_TAG='$(DPDK_CI_CONTAINERS_NO_LATEST_TAG)' \
> +             -e DPDK_CI_CONTAINERS_IS_BUILDER='$(DPDK_CI_CONTAINERS_IS_BUILDER)' \
> +             -e DPDK_CI_CONTAINERS_DATE_TAG_OVERRIDE='$(DPDK_CI_CONTAINERS_DATE_TAG_OVERRIDE)' \
> +             -e DPDK_CI_CONTAINERS_NINJA_WORKERS='$(DPDK_CI_CONTAINERS_NINJA_WORKERS)' \
> +             -e DPDK_CI_CONTAINERS_COVERITY='$(DPDK_CI_CONTAINERS_COVERITY)' \
> +             $(DPDK_CI_CONTAINERS_CONTAINER_BUILDER_TAG) make docker_deps
> +
> +external_files: $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) extra_scripts coverity
> +
> +build_builder_container:
> +     $(DPDK_CI_CONTAINER_BUILDER_PROGRAM) build -f $(CONTAINER_BUILDER_DOCKERFILE) -t $(DPDK_CI_CONTAINERS_CONTAINER_BUILDER_TAG) $(CURDIR)
> +
> +docker_deps: $(DOCKERFILE) deps extra_scripts
> +     chmod 666 $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/*.dockerfile
> +
> +$(DOCKERFILE): $(INVENTORY_FILE) $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) deps $(MAKE_DOCKERFILE_SCRIPT) $(shell find $(DOCKER_CONTAINER_TEMPLATE_DIR) -type f)
> +     cd $(SCRIPT_DIRECTORY) && $(MAKE_DOCKERFILE_COMMAND) $(SCRIPT_ARGS)
> +
> +deps: $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) dpdk dpdk-ci libabigail dpdk-stable
> +
> +extra_scripts: $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) $(EXTRA_SCRIPTS_DIRECTORY) $(DPDK_CI_CONTAINERS_EXTRA_SCRIPTS_PATH)
> +ifdef DPDK_CI_CONTAINERS_EXTRA_SCRIPTS_PATH
> +     cp -pur $(DPDK_CI_CONTAINERS_EXTRA_SCRIPTS_PATH)/* $(EXTRA_SCRIPTS_DIRECTORY)
> +endif
> +
> +# Clone libabigail source
> +libabigail: $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)
> +     git -C $(LIBABIGAIL_DIRECTORY) fetch $(GIT_FETCH_ARGS) || git clone $(DPDK_CI_CONTAINERS_LIBABIGAIL_CLONE_URL) $(LIBABIGAIL_DIRECTORY)
> +     git -C $(LIBABIGAIL_DIRECTORY) describe --tags `git -C $(LIBABIGAIL_DIRECTORY) rev-list --tags --max-count=1` | xargs -n 1 git -C $(LIBABIGAIL_DIRECTORY) checkout
> +
> +# Clone DPDK source
> +dpdk: $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)
> +     git -C $(DPDK_DIRECTORY) fetch $(GIT_FETCH_ARGS) || git clone $(DPDK_CI_CONTAINERS_DPDK_CLONE_URL) $(DPDK_DIRECTORY)
> +
> +# Clone DPDK CI tools source.
> +dpdk-ci: $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)
> +     git -C $(DPDK_CI_DIRECTORY) fetch $(GIT_FETCH_ARGS) || git clone $(DPDK_CI_CONTAINERS_DPDK_CI_CLONE_URL) $(DPDK_CI_DIRECTORY)
> +
> +# Copy the Coverity Scan binaries from a source into the context directory.
> +coverity: $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) $(COVERITY_DIRECTORY)
> +ifeq ($(DPDK_CI_CONTAINERS_COVERITY),Y)
> +ifndef DPDK_CI_CONTAINERS_COVERITY_PATH
> +     exit 1 # The coverity path must be set if building Coverity containers is enabled.
> +else
> +     cp -pur $(DPDK_CI_CONTAINERS_COVERITY_PATH)/* $(COVERITY_DIRECTORY)
> +endif
> +else
> +     # Coverity is disabled for this run.
> +endif
> +
> +dpdk-stable: $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)
> +     git -C $(DPDK_STABLE_DIRECTORY) fetch $(GIT_FETCH_ARGS) || git clone $(DPDK_CI_CONTAINERS_DPDK_STABLE_CLONE_URL) $(DPDK_STABLE_DIRECTORY)
> +
> +$(EXTRA_SCRIPTS_DIRECTORY):
> +     mkdir -p $(EXTRA_SCRIPTS_DIRECTORY)
> +
> +$(COVERITY_DIRECTORY):
> +     mkdir -p $(COVERITY_DIRECTORY)
> +
> +$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY):
> +     mkdir -p $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)
> +
> +clean_container_files:
> +     rm $(DOCKERFILE)
> +
> +clean:
> +     rm -rf $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)