Re: [dpdk-ci] [dpdklab] Re: [DPDKLAB] 25G Broadcom NIC in Arm hardware

[Ajit Khaparde <ajit.khaparde@broadcom.com>]

[-- Attachment #1: Type: text/plain, Size: 34367 bytes --]

Thanks David.
While I don't have the ARM server, I am trying to use the new version
of TREX and see if I run into any issues.
I will get back to you once I complete the test.

Thanks
Ajit


On Tue, Apr 6, 2021 at 7:29 AM David Liu <dliu@iol.unh.edu> wrote:
>
> Hi Ajit,
>
> I had rerun the test with the recent DTS and Trex (v2.88)
>
> With this, I am getting the mapping error we see during the debugging session.
>
> -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>                         pktgen: cd /opt/trex/v2.88;./t-rex-64 -i --cfg /opt/trex/v2.88/trex_cfg_bnxt.yaml
> Exception happened in [cd /opt/trex/v2.88;./t-rex-64 -i --cfg /opt/trex/v2.88/trex_cfg_bnxt.yaml] and output is [Starting Scapy server......... Scapy server is started
> Trying to bind to vfio-pci ...
> /usr/bin/python3 dpdk_nic_bind.py --bind=vfio-pci 0000:5f:00.0 0000:5f:00.1
> The ports are bound/configured.
> Starting  TRex v2.88 please wait  ...
> ERROR in DPDK map
> Could not find requested interface 5f:00.0
> Killing Scapy server... Scapy server is killed]
>                            dts: TIMEOUT on cd /opt/trex/v2.88;./t-rex-64 -i --cfg /opt/trex/v2.88/trex_cfg_bnxt.yaml
>                         tester: pkill -f _t-rex-64
> -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
> Best,
> David
>
>
>
> On Mon, Apr 5, 2021 at 10:26 AM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>
>> Hi David,
>> Yes. The changes are in the tree.
>> Let's try to rerun the test and see what happens.
>>
>> Thanks
>> Ajit
>>
>>
>> On Thu, Apr 1, 2021 at 10:09 AM David Liu <dliu@iol.unh.edu> wrote:
>>>
>>> Hi Ajit,
>>>
>>> I think the patch should be in the main tree by now.
>>>
>>> Can you check if that is true?
>>>
>>> Just checking, is this patch related to the Trex mapping issue?
>>>
>>> Best,
>>> David
>>>
>>> On Tue, Mar 16, 2021 at 11:43 AM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>>
>>>> Hi David,
>>>> The patch was in dpdk-next-net.
>>>> Let me check if it was applied in the main tree.
>>>>
>>>> Thanks
>>>> Ajit
>>>>
>>>> On Tue, Mar 16, 2021 at 8:32 AM David Liu <dliu@iol.unh.edu> wrote:
>>>> >
>>>> > Hi Ajit,
>>>> >
>>>> > Here to check in with you to see if the patch gets submitted.
>>>> >
>>>> > And for some confirmation, is this fix possibly be a solution to the current issue?
>>>> >
>>>> > Best,
>>>> > David
>>>> >
>>>> > On Thu, Mar 11, 2021 at 12:05 PM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >>
>>>> >> David,
>>>> >> While testing with TREX, we have one identified one fix.
>>>> >> We will try to submit it to the mailing list tomorrow.
>>>> >> Once it gets merged, I will get back to you for the setup.
>>>> >>
>>>> >> Thanks
>>>> >> Ajit
>>>> >>
>>>> >> On Thu, Mar 11, 2021 at 6:02 AM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >
>>>> >> > Hi Ajit,
>>>> >> >
>>>> >> > Thank you.
>>>> >> >
>>>> >> > Please let me know when you need to take over the machine again.
>>>> >> >
>>>> >> > Best,
>>>> >> > David
>>>> >> >
>>>> >> > On Tue, Mar 9, 2021 at 2:01 PM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >>
>>>> >> >> David,
>>>> >> >> The tool has issues when I load the kernel module.
>>>> >> >> I am looking for another alternative.
>>>> >> >> Please go ahead and take back the setup.
>>>> >> >>
>>>> >> >> Thanks
>>>> >> >> Ajit
>>>> >> >>
>>>> >> >> On Tue, Mar 9, 2021 at 8:56 AM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> >
>>>> >> >> > Hi David,
>>>> >> >> > I am about to login into the setup and try something.
>>>> >> >> > I will let you know once I am done and then you can take control.
>>>> >> >> >
>>>> >> >> > Thanks
>>>> >> >> > Ajit
>>>> >> >> >
>>>> >> >> > On Tue, Mar 9, 2021 at 6:24 AM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >
>>>> >> >> > > Hi Ajit,
>>>> >> >> > >
>>>> >> >> > > Thank for the update.
>>>> >> >> > >
>>>> >> >> > > May I know if I can enable testing or would you like more time to look into this?
>>>> >> >> > >
>>>> >> >> > > Best,
>>>> >> >> > > David
>>>> >> >> > >
>>>> >> >> > > On Sun, Mar 7, 2021 at 8:07 PM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> > >>
>>>> >> >> > >> David,
>>>> >> >> > >> I did spend some time on this. For now I can't tell what is wrong.
>>>> >> >> > >> But I want to update the firmware on the card to take another shot at it.
>>>> >> >> > >> Since this is an ARM based server, I will have to find a way to update the firmware.
>>>> >> >> > >> IIRC our tools are mostly x86 based. So I am looking around.
>>>> >> >> > >> I will update you soon.
>>>> >> >> > >>
>>>> >> >> > >> Thanks
>>>> >> >> > >> Ajit
>>>> >> >> > >>
>>>> >> >> > >> On Fri, Mar 5, 2021 at 2:06 PM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> > >>>
>>>> >> >> > >>> Hi David,
>>>> >> >> > >>> That's a good idea. That way you don't have to watch out for my email requesting to stop the tests.
>>>> >> >> > >>>
>>>> >> >> > >>> Thanks
>>>> >> >> > >>> Ajit
>>>> >> >> > >>>
>>>> >> >> > >>> On Fri, Mar 5, 2021 at 1:29 PM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >>>>
>>>> >> >> > >>>> Hi Ajit, Juraj,
>>>> >> >> > >>>>
>>>> >> >> > >>>> For simplicity, we will keep the functional and performance testing disable during the weekend.
>>>> >> >> > >>>>
>>>> >> >> > >>>> In this way, you will have no testing interfere with you during troubleshooting.
>>>> >> >> > >>>>
>>>> >> >> > >>>> Then we will rerun all the jobs that are skipped.
>>>> >> >> > >>>>
>>>> >> >> > >>>> Please let me know if you have any questions.
>>>> >> >> > >>>>
>>>> >> >> > >>>> Best,
>>>> >> >> > >>>> David
>>>> >> >> > >>>>
>>>> >> >> > >>>> On Wed, Mar 3, 2021 at 4:05 AM Juraj Linkeš <juraj.linkes@pantheon.tech> wrote:
>>>> >> >> > >>>>>
>>>> >> >> > >>>>> Hi David, Ajit,
>>>> >> >> > >>>>>
>>>> >> >> > >>>>>
>>>> >> >> > >>>>>
>>>> >> >> > >>>>> Friday 10am is 4pm for me a that's fine.
>>>> >> >> > >>>>>
>>>> >> >> > >>>>>
>>>> >> >> > >>>>>
>>>> >> >> > >>>>> Juraj
>>>> >> >> > >>>>>
>>>> >> >> > >>>>>
>>>> >> >> > >>>>>
>>>> >> >> > >>>>> From: David Liu <dliu@iol.unh.edu>
>>>> >> >> > >>>>> Sent: Tuesday, March 2, 2021 7:06 PM
>>>> >> >> > >>>>> To: Ajit Khaparde <ajit.khaparde@broadcom.com>
>>>> >> >> > >>>>> Cc: Juraj Linkeš <juraj.linkes@pantheon.tech>; Owen Hilyard <ohilyard@iol.unh.edu>; ci@dpdk.org; dpdklab <dpdklab@iol.unh.edu>
>>>> >> >> > >>>>> Subject: Re: [dpdk-ci] [dpdklab] Re: [DPDKLAB] 25G Broadcom NIC in Arm hardware
>>>> >> >> > >>>>>
>>>> >> >> > >>>>>
>>>> >> >> > >>>>>
>>>> >> >> > >>>>> Hi, Ajit
>>>> >> >> > >>>>> I changed it to Friday at 10 AM for now.
>>>> >> >> > >>>>>
>>>> >> >> > >>>>> We can change again if that doesn't work for Juraj
>>>> >> >> > >>>>>
>>>> >> >> > >>>>> Best,
>>>> >> >> > >>>>>
>>>> >> >> > >>>>> David
>>>> >> >> > >>>>>
>>>> >> >> > >>>>>
>>>> >> >> > >>>>>
>>>> >> >> > >>>>>
>>>> >> >> > >>>>>
>>>> >> >> > >>>>> On Tue, Mar 2, 2021 at 10:28 AM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> > >>>>>
>>>> >> >> > >>>>> Hi David,
>>>> >> >> > >>>>> My Thursdays are crazy. Can we do Friday instead?
>>>> >> >> > >>>>> Juraj, can you make Friday 10AM (Eastern time) call?
>>>> >> >> > >>>>>
>>>> >> >> > >>>>> Thanks
>>>> >> >> > >>>>> Ajit
>>>> >> >> > >>>>>
>>>> >> >> > >>>>> On Tue, Mar 2, 2021 at 6:29 AM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >
>>>> >> >> > >>>>> > Hi Ajit and Juraj,
>>>> >> >> > >>>>> >
>>>> >> >> > >>>>> > I send out an invite for Thursday, Mar 4 at 10:00 AM. But feel free to adjust the time or let me know if there is a better time that works for you.
>>>> >> >> > >>>>> >
>>>> >> >> > >>>>> > For me, I can do:
>>>> >> >> > >>>>> > Tuesday 10:00 AM - 1:00 PM.
>>>> >> >> > >>>>> > Thursday 10:00 AM - 1:00 PM.
>>>> >> >> > >>>>> > Friday 10:00 AM - 12:00 PM and 2:00 PM - 5:00 PM
>>>> >> >> > >>>>> >
>>>> >> >> > >>>>> > Best,
>>>> >> >> > >>>>> > David
>>>> >> >> > >>>>> >
>>>> >> >> > >>>>> > On Mon, Mar 1, 2021 at 10:12 AM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> > >>>>> >>
>>>> >> >> > >>>>> >> David,
>>>> >> >> > >>>>> >> I was busy with a customer issue and could not get to my emails.
>>>> >> >> > >>>>> >> I am seeing this now. Let me close out any issues needing urgent attention.
>>>> >> >> > >>>>> >> Let's sync on a suitable time after that.
>>>> >> >> > >>>>> >>
>>>> >> >> > >>>>> >> Juraj,
>>>> >> >> > >>>>> >> Sure. We will add you.
>>>> >> >> > >>>>> >>
>>>> >> >> > >>>>> >> Thanks
>>>> >> >> > >>>>> >> Ajit
>>>> >> >> > >>>>> >>
>>>> >> >> > >>>>> >> On Mon, Mar 1, 2021 at 7:00 AM Juraj Linkeš <juraj.linkes@pantheon.tech> wrote:
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Hi Ajit, David,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > If you're setting up a call, could you please send me an invite? I'd like to get some insight into the issues on Arm's behalf.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Thanks,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Juraj
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > From: ci <ci-bounces@dpdk.org> On Behalf Of David Liu
>>>> >> >> > >>>>> >> > Sent: Thursday, February 25, 2021 7:47 PM
>>>> >> >> > >>>>> >> > To: Ajit Khaparde <ajit.khaparde@broadcom.com>
>>>> >> >> > >>>>> >> > Cc: Owen Hilyard <ohilyard@iol.unh.edu>; ci@dpdk.org; dpdklab <dpdklab@iol.unh.edu>
>>>> >> >> > >>>>> >> > Subject: Re: [dpdk-ci] [dpdklab] Re: [DPDKLAB] 25G Broadcom NIC in Arm hardware
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Hi Ajit,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Sorry for this issue.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > If possible I would like to set up a time where we can do this in a call to help get this solved faster.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Please let me know what would be a good time for you.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Best,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > David
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > On Thu, Feb 25, 2021 at 12:55 PM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Hi Ajit,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > I changed the permission to allow you to run sudo.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > This should work now.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Let me know if you still have issues.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Best,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > David
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > On Mon, Feb 22, 2021 at 11:11 PM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > David,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > I tried the option to use sudo. And that didn't work.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Thanks
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Ajit
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > ajitkhaparde is not allowed to run sudo on arm-gigabyte.  This incident will be reported.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > ----
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > sudo su
>>>> >> >> > >>>>> >> > [sudo] password for ajitkhaparde:
>>>> >> >> > >>>>> >> > ajitkhaparde is not allowed to run sudo on arm-dell.  This incident will be reported.
>>>> >> >> > >>>>> >> > ajitkhaparde@arm-dell:/opt/dts$ sudo ./dts -s
>>>> >> >> > >>>>> >> > [sudo] password for ajitkhaparde:
>>>> >> >> > >>>>> >> > ajitkhaparde is not allowed to run sudo on arm-dell.  This incident will be reported.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > On Thu, Feb 18, 2021 at 10:03 AM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > On Thu, Feb 18, 2021 at 10:01 AM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Hi Ajit,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > This is likely caused by when dts try to ssh into another machine as a normal user which will prompt you for the password.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > One solution would be "sudo su" as root to run the command line since you should have root access.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > David,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Let me try this method first.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > If it does not work, we could try with the public ssh keys.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > I will let you know.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Thanks
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Ajit
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Another solution would be to let me add your public ssh key into both machines.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Let me know if this helps.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Best,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > David
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > On Fri, Feb 12, 2021 at 5:48 PM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Thanks Owen.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > When I run the dts command line suggested, I get the following error.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Thanks
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Ajit
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Traceback (most recent call last):
>>>> >> >> > >>>>> >> >   File "/opt/dts/framework/ssh_pexpect.py", line 60, in _connect_host
>>>> >> >> > >>>>> >> >     self.password, original_prompt='[$#>]', password_regex=r'(?i)(?:password:)|(?:passphrase for key)|(?i)(password for .+:)')
>>>> >> >> > >>>>> >> >   File "/usr/local/lib/python3.6/dist-packages/pexpect/pxssh.py", line 440, in login
>>>> >> >> > >>>>> >> >     raise ExceptionPxssh('password refused')
>>>> >> >> > >>>>> >> > pexpect.pxssh.ExceptionPxssh: password refused
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >                                          ^^^^^^^^^^^^^^
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > On Fri, Feb 12, 2021 at 12:09 PM Owen Hilyard <ohilyard@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Hello Ajit,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > There was a misconfiguration in our identity management system. The issue should now be resolved.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Owen Hilyard
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > On Thu, Feb 11, 2021 at 9:38 PM 'Ajit Khaparde' via dpdklab <dpdklab@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > David,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > I can use my credentials to login to rhea.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > But the same credentials are not allowing me to login onto the servers you provided.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Thanks
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Ajit
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > ssh -l ajitkhaparde arm-gigabyte.dpdklab.iol.unh.edu
>>>> >> >> > >>>>> >> > Connection closed by 172.18.0.41 port 22
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > ssh -l ajitkhaparde arm-dell.dpdklab.iol.unh.edu
>>>> >> >> > >>>>> >> > Connection closed by 172.18.0.40 port 22
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > On Tue, Feb 9, 2021 at 6:36 AM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Hi Ajit,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Thanks for the update. Let me know if you need anything from me.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Best,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > David
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > On Sun, Feb 7, 2021 at 11:04 PM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > David,
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > I had some trouble with my system over the past week.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > So I could not login into the setup. I am hoping that my system will be restored early this week
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > I will login into the setup after that.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Thanks
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Ajit
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > On Tue, Feb 2, 2021 at 10:57 AM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Hi David,
>>>> >> >> > >>>>> >> > I actually did miss it. I will take a look.
>>>> >> >> > >>>>> >> > Thanks for the refresh mail.
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > Thanks
>>>> >> >> > >>>>> >> > Ajit
>>>> >> >> > >>>>> >> >
>>>> >> >> > >>>>> >> > On Tue, Feb 2, 2021 at 8:58 AM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >> > >
>>>> >> >> > >>>>> >> > > Hi Ajit,
>>>> >> >> > >>>>> >> > >
>>>> >> >> > >>>>> >> > > Ping again in case if you miss the last email.
>>>> >> >> > >>>>> >> > >
>>>> >> >> > >>>>> >> > > Did you have a chance to give it a try on login to the machines?
>>>> >> >> > >>>>> >> > >
>>>> >> >> > >>>>> >> > > Just some notes, we are currently running compile and some performance/functional testing.
>>>> >> >> > >>>>> >> > > Which it may be hard for you to run dts, so please let me know if you want me to stop these tests for you to debug.
>>>> >> >> > >>>>> >> > >
>>>> >> >> > >>>>> >> > > Step I run:
>>>> >> >> > >>>>> >> > > CONF="conf_dpdk" ./switch.sh Broadcom   #this is to switch the dts configuration to Broadcom
>>>> >> >> > >>>>> >> > > ./dts -s                                                           #To start the dts
>>>> >> >> > >>>>> >> > >
>>>> >> >> > >>>>> >> > > Informatio:
>>>> >> >> > >>>>> >> > > arm-dell.dpdklab.iol.unh.edu
>>>> >> >> > >>>>> >> > > - dts - located in /opt/dts
>>>> >> >> > >>>>> >> > > - Trex - located in /opt/trex/v2.87
>>>> >> >> > >>>>> >> > >
>>>> >> >> > >>>>> >> > > arm-gigabyte.dpdklab.iol.unh.edu
>>>> >> >> > >>>>> >> > > - dpdk - located in /root/dpdk
>>>> >> >> > >>>>> >> > >
>>>> >> >> > >>>>> >> > > Best,
>>>> >> >> > >>>>> >> > > David
>>>> >> >> > >>>>> >> > >
>>>> >> >> > >>>>> >> > > On Tue, Jan 26, 2021 at 4:59 PM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >> > >>
>>>> >> >> > >>>>> >> > >> Also, I had changed the configuration when I run Broadcom nic.
>>>> >> >> > >>>>> >> > >> In the dts folder, you can start it with ./dts -s
>>>> >> >> > >>>>> >> > >>
>>>> >> >> > >>>>> >> > >> On Tue, Jan 26, 2021 at 4:54 PM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >> > >>>
>>>> >> >> > >>>>> >> > >>> Hi Ajit,
>>>> >> >> > >>>>> >> > >>> Sorry for the late reply.
>>>> >> >> > >>>>> >> > >>>
>>>> >> >> > >>>>> >> > >>> You can ssh into the machine using the same VPN Username and Password.
>>>> >> >> > >>>>> >> > >>> Can you try and see if that works?
>>>> >> >> > >>>>> >> > >>>
>>>> >> >> > >>>>> >> > >>> Informatio:
>>>> >> >> > >>>>> >> > >>> arm-dell.dpdklab.iol.unh.edu
>>>> >> >> > >>>>> >> > >>> - dts - located in /opt/dts
>>>> >> >> > >>>>> >> > >>> - Trex - located in /opt/trex/v2.87
>>>> >> >> > >>>>> >> > >>>
>>>> >> >> > >>>>> >> > >>> arm-gigabyte.dpdklab.iol.unh.edu
>>>> >> >> > >>>>> >> > >>> - dpdk - located in /root/dpdk
>>>> >> >> > >>>>> >> > >>>
>>>> >> >> > >>>>> >> > >>>
>>>> >> >> > >>>>> >> > >>> Thanks,
>>>> >> >> > >>>>> >> > >>> David
>>>> >> >> > >>>>> >> > >>>
>>>> >> >> > >>>>> >> > >>> On Tue, Jan 19, 2021 at 5:20 PM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> > >>>>> >> > >>>>
>>>> >> >> > >>>>> >> > >>>> Hi David,
>>>> >> >> > >>>>> >> > >>>> Thanks for pinging me. Do you think I could login into the setup and
>>>> >> >> > >>>>> >> > >>>> see what is happening?
>>>> >> >> > >>>>> >> > >>>> I do have the credentials for two systems in your lab -
>>>> >> >> > >>>>> >> > >>>> rhea.dpdklab.iol.unh.edu and io.dpdklab.iol.unh.edu
>>>> >> >> > >>>>> >> > >>>> If you can provide me details of the systems you are trying to
>>>> >> >> > >>>>> >> > >>>> configure, I could take a look.
>>>> >> >> > >>>>> >> > >>>>
>>>> >> >> > >>>>> >> > >>>> Thanks
>>>> >> >> > >>>>> >> > >>>> Ajit
>>>> >> >> > >>>>> >> > >>>>
>>>> >> >> > >>>>> >> > >>>> On Tue, Jan 19, 2021 at 1:41 PM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >> > >>>> >
>>>> >> >> > >>>>> >> > >>>> > Hi Ajit,
>>>> >> >> > >>>>> >> > >>>> >
>>>> >> >> > >>>>> >> > >>>> > Thank you for helping out.
>>>> >> >> > >>>>> >> > >>>> >
>>>> >> >> > >>>>> >> > >>>> > How are you doing with this issue?
>>>> >> >> > >>>>> >> > >>>> >
>>>> >> >> > >>>>> >> > >>>> > Please let me know if you need anything information from us.
>>>> >> >> > >>>>> >> > >>>> >
>>>> >> >> > >>>>> >> > >>>> > Just some extra information that both Trex and dts are on the same intel tester machine.
>>>> >> >> > >>>>> >> > >>>> >
>>>> >> >> > >>>>> >> > >>>> > Best,
>>>> >> >> > >>>>> >> > >>>> > David
>>>> >> >> > >>>>> >> > >>>> >
>>>> >> >> > >>>>> >> > >>>> > On Thu, Jan 14, 2021 at 2:12 PM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >> > >>>> >>
>>>> >> >> > >>>>> >> > >>>> >> Yes, so this is the same NIC work on x86.
>>>> >> >> > >>>>> >> > >>>> >> By seeing the link, I am assuming you mean the ports that are using for Trex. If so they are UP before I start the Trex.
>>>> >> >> > >>>>> >> > >>>> >>
>>>> >> >> > >>>>> >> > >>>> >> Thank,
>>>> >> >> > >>>>> >> > >>>> >> David
>>>> >> >> > >>>>> >> > >>>> >>
>>>> >> >> > >>>>> >> > >>>> >>
>>>> >> >> > >>>>> >> > >>>> >> On Thu, Jan 14, 2021 at 1:11 AM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> > >>>>> >> > >>>> >>>
>>>> >> >> > >>>>> >> > >>>> >>> Does the same NIC work on x86?
>>>> >> >> > >>>>> >> > >>>> >>> Also do you see link before you start the trex? I am trying to see if the port failed to successfully come up
>>>> >> >> > >>>>> >> > >>>> >>> or if there is a problem with the link. Can you check and tell?
>>>> >> >> > >>>>> >> > >>>> >>>
>>>> >> >> > >>>>> >> > >>>> >>> Thanks
>>>> >> >> > >>>>> >> > >>>> >>> Ajit
>>>> >> >> > >>>>> >> > >>>> >>>
>>>> >> >> > >>>>> >> > >>>> >>> On Wed, Jan 13, 2021 at 4:20 PM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >> > >>>> >>>>
>>>> >> >> > >>>>> >> > >>>> >>>> Hi Ajit,
>>>> >> >> > >>>>> >> > >>>> >>>>
>>>> >> >> > >>>>> >> > >>>> >>>> Thank you for helping out.
>>>> >> >> > >>>>> >> > >>>> >>>>
>>>> >> >> > >>>>> >> > >>>> >>>> We have it working on the x86, but not the Arm.
>>>> >> >> > >>>>> >> > >>>> >>>>
>>>> >> >> > >>>>> >> > >>>> >>>>
>>>> >> >> > >>>>> >> > >>>> >>>> Thanks,
>>>> >> >> > >>>>> >> > >>>> >>>> David
>>>> >> >> > >>>>> >> > >>>> >>>>
>>>> >> >> > >>>>> >> > >>>> >>>> On Wed, Jan 13, 2021 at 5:34 PM Ajit Khaparde <ajit.khaparde@broadcom.com> wrote:
>>>> >> >> > >>>>> >> > >>>> >>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>> Hi David,
>>>> >> >> > >>>>> >> > >>>> >>>>> I will take a look.
>>>> >> >> > >>>>> >> > >>>> >>>>> Do you see similar issues on x86? I am asking because
>>>> >> >> > >>>>> >> > >>>> >>>>> even I would start with that to create a baseline and then
>>>> >> >> > >>>>> >> > >>>> >>>>> attempt on ARM.
>>>> >> >> > >>>>> >> > >>>> >>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>> Thanks
>>>> >> >> > >>>>> >> > >>>> >>>>> Ajit
>>>> >> >> > >>>>> >> > >>>> >>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>> On Wed, Jan 13, 2021 at 12:08 PM David Liu <dliu@iol.unh.edu> wrote:
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>> Hi Ajit,
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>> We have a 25G Broadcom NIC that is installed on an Arm machine.
>>>> >> >> > >>>>> >> > >>>> >>>>>> And I am running into a problem when I try to run nic_single_core_perf on the NIC.
>>>> >> >> > >>>>> >> > >>>> >>>>>> Currently, we are using: Trex v2.86 and dts from http://git.dpdk.org/tools/dts/
>>>> >> >> > >>>>> >> > >>>> >>>>>> All the NICs are up and running when testing.
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>> The problem is an error when I try to run the test case inside the nic_single_core_perf:
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>>> TestNicSingleCorePerf: Test running at parameters: framesize: 64, rxd/txd: 512
>>>> >> >> > >>>>> >> > >>>> >>>>>>>                dut.172.18.0.41: x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 32,33 -n 4  --file-prefix=dpdk_15311_20210113190237   -a 0000:93:00.0 -a 0000:93:00.1 -- -i --portmask=0x3 --txd=512 --rxd=512 --nb-cores=1
>>>> >> >> > >>>>> >> > >>>> >>>>>>>                dut.172.18.0.41: start
>>>> >> >> > >>>>> >> > >>>> >>>>>>>          TestNicSingleCorePerf: Test Case test_perf_nic_single_core Result ERROR: Traceback (most recent call last):
>>>> >> >> > >>>>> >> > >>>> >>>>>>>   File "/opt/dts/framework/test_case.py", line 319, in _execute_test_case
>>>> >> >> > >>>>> >> > >>>> >>>>>>>     case_obj()
>>>> >> >> > >>>>> >> > >>>> >>>>>>>   File "tests/TestSuite_nic_single_core_perf.py", line 196, in test_perf_nic_single_core
>>>> >> >> > >>>>> >> > >>>> >>>>>>>     self.perf_test(self.nb_ports)
>>>> >> >> > >>>>> >> > >>>> >>>>>>>   File "tests/TestSuite_nic_single_core_perf.py", line 270, in perf_test
>>>> >> >> > >>>>> >> > >>>> >>>>>>>     _, packets_received = self.tester.pktgen.measure_throughput(stream_ids=streams, options=traffic_opt)
>>>> >> >> > >>>>> >> > >>>> >>>>>>>   File "/opt/dts/framework/pktgen_base.py", line 245, in measure_throughput
>>>> >> >> > >>>>> >> > >>>> >>>>>>>     self._prepare_transmission(stream_ids=stream_ids)
>>>> >> >> > >>>>> >> > >>>> >>>>>>>   File "/opt/dts/framework/pktgen_trex.py", line 778, in _prepare_transmission
>>>> >> >> > >>>>> >> > >>>> >>>>>>>     self._conn.reset(ports=self._ports)
>>>> >> >> > >>>>> >> > >>>> >>>>>>>   File "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py", line 51, in wrap2
>>>> >> >> > >>>>> >> > >>>> >>>>>>>     ret = f(*args, **kwargs)
>>>> >> >> > >>>>> >> > >>>> >>>>>>>   File "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py", line 339, in reset
>>>> >> >> > >>>>> >> > >>>> >>>>>>>     self.clear_stats(ports)
>>>> >> >> > >>>>> >> > >>>> >>>>>>>   File "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py", line 51, in wrap2
>>>> >> >> > >>>>> >> > >>>> >>>>>>>     ret = f(*args, **kwargs)
>>>> >> >> > >>>>> >> > >>>> >>>>>>>   File "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py", line 1492, in clear_stats
>>>> >> >> > >>>>> >> > >>>> >>>>>>>     self._clear_stats_common(ports, clear_global, clear_xstats)
>>>> >> >> > >>>>> >> > >>>> >>>>>>>   File "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_client.py", line 2876, in _clear_stats_common
>>>> >> >> > >>>>> >> > >>>> >>>>>>>     raise TRexError(rc)
>>>> >> >> > >>>>> >> > >>>> >>>>>>> trex.common.trex_exceptions.TRexError: *** [RPC] - Failed to get server response from tcp://172.18.0.40:4501
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>> I also try to run TRex in stateless mode with./t-rex-64 -i --cfg /etc/trex_cfg.yaml and  connect with ./trex-console
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>> Then start sending traffic with command
>>>> >> >> > >>>>> >> > >>>> >>>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>>> trex>start -f stl/imix.py
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>> But this will cause an error to turn off Trex.
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>>> trex>
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 2021-01-13 19:56:21 - [server][warning]  - Server has been shutdown - cause: 'WATCHDOG: task 'Trex DP core 1' has not responded for more than 1.00135 seconds - timeout is 1 seconds
>>>> >> >> > >>>>> >> > >>>> >>>>>>> *** traceback follows ***
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 1       0x561be173cf5a ./_t-rex-64(+0x19af5a) [0x561be173cf5a]
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 2       0x7feea3ac0980 /lib/x86_64-linux-gnu/libpthread.so.0(+0x12980) [0x7feea3ac0980]
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 3       0x561be1a05a2a rte_delay_us_block + 106
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 4       0x561be16ce874 CCoreEthIF::send_burst(CCorePerPort*, unsigned short, CVirtualIFPerSideStats*) + 3220
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 5       0x561be16abf57 CCoreEthIF::flush_tx_queue() + 31
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 6       0x561be171e3d9 CNodeGenerator::handle_maintenance(CFlowGenListPerThread*) + 265
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 7       0x561be171f7ec CNodeGenerator::handle_flow_sync(CGenNode*, CFlowGenListPerThread*, bool&) + 92
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 8       0x561be171fc98 CNodeGenerator::handle_slow_messages(unsigned char, CGenNode*, CFlowGenListPerThread*, bool) + 184
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 9       0x561be16cb5f1 int CNodeGenerator::flush_file_realtime<23, false>(double, double, CFlowGenListPerThread*, double&) + 881
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 10      0x561be1905212 TrexStatelessDpCore::start_scheduler() + 226
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 11      0x561be1883ae9 TrexDpCore::start() + 89
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 12      0x561be1714113 CFlowGenListPerThread::start(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >&, CPreviewMode&) + 115
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 13      0x561be16af8dd CGlobalTRex::run_in_core(unsigned char) + 487
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 14      0x561be16d11ad ./_t-rex-64(+0x12f1ad) [0x561be16d11ad]
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 15      0x561be1a1dfaa eal_thread_loop + 426
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 16      0x7feea3ab56db /lib/x86_64-linux-gnu/libpthread.so.0(+0x76db) [0x7feea3ab56db]
>>>> >> >> > >>>>> >> > >>>> >>>>>>> 17      0x7feea2a8571f clone + 63
>>>> >> >> > >>>>> >> > >>>> >>>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>>> *** addr2line information follows ***
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>>>> >> >> > >>>>> >> > >>>> >>>>>>> '
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>> I believe if everything is working, this should not turn off trex but please correct me if I am wrong.
>>>> >> >> > >>>>> >> > >>>> >>>>>> I wonder if you have any suggestion of how I can approach this issue?
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>> Best,
>>>> >> >> > >>>>> >> > >>>> >>>>>> David
>>>> >> >> > >>>>> >> > >>>> >>>>>>
>>>> >> >> > >>>>> >> > >>>> >>>>>>

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4218 bytes --]