Hi David, Yes. The changes are in the tree. Let's try to rerun the test and see what happens. Thanks Ajit On Thu, Apr 1, 2021 at 10:09 AM David Liu wrote: > Hi Ajit, > > I think the patch should be in the main tree by now. > > Can you check if that is true? > > Just checking, is this patch related to the Trex mapping issue? > > Best, > David > > On Tue, Mar 16, 2021 at 11:43 AM Ajit Khaparde > wrote: > >> Hi David, >> The patch was in dpdk-next-net. >> Let me check if it was applied in the main tree. >> >> Thanks >> Ajit >> >> On Tue, Mar 16, 2021 at 8:32 AM David Liu wrote: >> > >> > Hi Ajit, >> > >> > Here to check in with you to see if the patch gets submitted. >> > >> > And for some confirmation, is this fix possibly be a solution to the >> current issue? >> > >> > Best, >> > David >> > >> > On Thu, Mar 11, 2021 at 12:05 PM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> >> David, >> >> While testing with TREX, we have one identified one fix. >> >> We will try to submit it to the mailing list tomorrow. >> >> Once it gets merged, I will get back to you for the setup. >> >> >> >> Thanks >> >> Ajit >> >> >> >> On Thu, Mar 11, 2021 at 6:02 AM David Liu wrote: >> >> > >> >> > Hi Ajit, >> >> > >> >> > Thank you. >> >> > >> >> > Please let me know when you need to take over the machine again. >> >> > >> >> > Best, >> >> > David >> >> > >> >> > On Tue, Mar 9, 2021 at 2:01 PM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> >> >> >> David, >> >> >> The tool has issues when I load the kernel module. >> >> >> I am looking for another alternative. >> >> >> Please go ahead and take back the setup. >> >> >> >> >> >> Thanks >> >> >> Ajit >> >> >> >> >> >> On Tue, Mar 9, 2021 at 8:56 AM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> > >> >> >> > Hi David, >> >> >> > I am about to login into the setup and try something. >> >> >> > I will let you know once I am done and then you can take control. >> >> >> > >> >> >> > Thanks >> >> >> > Ajit >> >> >> > >> >> >> > On Tue, Mar 9, 2021 at 6:24 AM David Liu >> wrote: >> >> >> > > >> >> >> > > Hi Ajit, >> >> >> > > >> >> >> > > Thank for the update. >> >> >> > > >> >> >> > > May I know if I can enable testing or would you like more time >> to look into this? >> >> >> > > >> >> >> > > Best, >> >> >> > > David >> >> >> > > >> >> >> > > On Sun, Mar 7, 2021 at 8:07 PM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> > >> >> >> >> > >> David, >> >> >> > >> I did spend some time on this. For now I can't tell what is >> wrong. >> >> >> > >> But I want to update the firmware on the card to take another >> shot at it. >> >> >> > >> Since this is an ARM based server, I will have to find a way >> to update the firmware. >> >> >> > >> IIRC our tools are mostly x86 based. So I am looking around. >> >> >> > >> I will update you soon. >> >> >> > >> >> >> >> > >> Thanks >> >> >> > >> Ajit >> >> >> > >> >> >> >> > >> On Fri, Mar 5, 2021 at 2:06 PM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> > >>> >> >> >> > >>> Hi David, >> >> >> > >>> That's a good idea. That way you don't have to watch out for >> my email requesting to stop the tests. >> >> >> > >>> >> >> >> > >>> Thanks >> >> >> > >>> Ajit >> >> >> > >>> >> >> >> > >>> On Fri, Mar 5, 2021 at 1:29 PM David Liu >> wrote: >> >> >> > >>>> >> >> >> > >>>> Hi Ajit, Juraj, >> >> >> > >>>> >> >> >> > >>>> For simplicity, we will keep the functional and performance >> testing disable during the weekend. >> >> >> > >>>> >> >> >> > >>>> In this way, you will have no testing interfere with you >> during troubleshooting. >> >> >> > >>>> >> >> >> > >>>> Then we will rerun all the jobs that are skipped. >> >> >> > >>>> >> >> >> > >>>> Please let me know if you have any questions. >> >> >> > >>>> >> >> >> > >>>> Best, >> >> >> > >>>> David >> >> >> > >>>> >> >> >> > >>>> On Wed, Mar 3, 2021 at 4:05 AM Juraj Linkeš >> wrote: >> >> >> > >>>>> >> >> >> > >>>>> Hi David, Ajit, >> >> >> > >>>>> >> >> >> > >>>>> >> >> >> > >>>>> >> >> >> > >>>>> Friday 10am is 4pm for me a that's fine. >> >> >> > >>>>> >> >> >> > >>>>> >> >> >> > >>>>> >> >> >> > >>>>> Juraj >> >> >> > >>>>> >> >> >> > >>>>> >> >> >> > >>>>> >> >> >> > >>>>> From: David Liu >> >> >> > >>>>> Sent: Tuesday, March 2, 2021 7:06 PM >> >> >> > >>>>> To: Ajit Khaparde >> >> >> > >>>>> Cc: Juraj Linkeš ; Owen >> Hilyard ; ci@dpdk.org; dpdklab > > >> >> >> > >>>>> Subject: Re: [dpdk-ci] [dpdklab] Re: [DPDKLAB] 25G Broadcom >> NIC in Arm hardware >> >> >> > >>>>> >> >> >> > >>>>> >> >> >> > >>>>> >> >> >> > >>>>> Hi, Ajit >> >> >> > >>>>> I changed it to Friday at 10 AM for now. >> >> >> > >>>>> >> >> >> > >>>>> We can change again if that doesn't work for Juraj >> >> >> > >>>>> >> >> >> > >>>>> Best, >> >> >> > >>>>> >> >> >> > >>>>> David >> >> >> > >>>>> >> >> >> > >>>>> >> >> >> > >>>>> >> >> >> > >>>>> >> >> >> > >>>>> >> >> >> > >>>>> On Tue, Mar 2, 2021 at 10:28 AM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> > >>>>> >> >> >> > >>>>> Hi David, >> >> >> > >>>>> My Thursdays are crazy. Can we do Friday instead? >> >> >> > >>>>> Juraj, can you make Friday 10AM (Eastern time) call? >> >> >> > >>>>> >> >> >> > >>>>> Thanks >> >> >> > >>>>> Ajit >> >> >> > >>>>> >> >> >> > >>>>> On Tue, Mar 2, 2021 at 6:29 AM David Liu >> wrote: >> >> >> > >>>>> > >> >> >> > >>>>> > Hi Ajit and Juraj, >> >> >> > >>>>> > >> >> >> > >>>>> > I send out an invite for Thursday, Mar 4 at 10:00 AM. But >> feel free to adjust the time or let me know if there is a better time that >> works for you. >> >> >> > >>>>> > >> >> >> > >>>>> > For me, I can do: >> >> >> > >>>>> > Tuesday 10:00 AM - 1:00 PM. >> >> >> > >>>>> > Thursday 10:00 AM - 1:00 PM. >> >> >> > >>>>> > Friday 10:00 AM - 12:00 PM and 2:00 PM - 5:00 PM >> >> >> > >>>>> > >> >> >> > >>>>> > Best, >> >> >> > >>>>> > David >> >> >> > >>>>> > >> >> >> > >>>>> > On Mon, Mar 1, 2021 at 10:12 AM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> > >>>>> >> >> >> >> > >>>>> >> David, >> >> >> > >>>>> >> I was busy with a customer issue and could not get to my >> emails. >> >> >> > >>>>> >> I am seeing this now. Let me close out any issues >> needing urgent attention. >> >> >> > >>>>> >> Let's sync on a suitable time after that. >> >> >> > >>>>> >> >> >> >> > >>>>> >> Juraj, >> >> >> > >>>>> >> Sure. We will add you. >> >> >> > >>>>> >> >> >> >> > >>>>> >> Thanks >> >> >> > >>>>> >> Ajit >> >> >> > >>>>> >> >> >> >> > >>>>> >> On Mon, Mar 1, 2021 at 7:00 AM Juraj Linkeš >> wrote: >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Hi Ajit, David, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > If you're setting up a call, could you please send me >> an invite? I'd like to get some insight into the issues on Arm's behalf. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Thanks, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Juraj >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > From: ci On Behalf Of David Liu >> >> >> > >>>>> >> > Sent: Thursday, February 25, 2021 7:47 PM >> >> >> > >>>>> >> > To: Ajit Khaparde >> >> >> > >>>>> >> > Cc: Owen Hilyard ; ci@dpdk.org; >> dpdklab >> >> >> > >>>>> >> > Subject: Re: [dpdk-ci] [dpdklab] Re: [DPDKLAB] 25G >> Broadcom NIC in Arm hardware >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Hi Ajit, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Sorry for this issue. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > If possible I would like to set up a time where we can >> do this in a call to help get this solved faster. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Please let me know what would be a good time for you. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Best, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > David >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > On Thu, Feb 25, 2021 at 12:55 PM David Liu < >> dliu@iol.unh.edu> wrote: >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Hi Ajit, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > I changed the permission to allow you to run sudo. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > This should work now. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Let me know if you still have issues. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Best, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > David >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > On Mon, Feb 22, 2021 at 11:11 PM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > David, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > I tried the option to use sudo. And that didn't work. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Thanks >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Ajit >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > ajitkhaparde is not allowed to run sudo on >> arm-gigabyte. This incident will be reported. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > ---- >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > sudo su >> >> >> > >>>>> >> > [sudo] password for ajitkhaparde: >> >> >> > >>>>> >> > ajitkhaparde is not allowed to run sudo on arm-dell. >> This incident will be reported. >> >> >> > >>>>> >> > ajitkhaparde@arm-dell:/opt/dts$ sudo ./dts -s >> >> >> > >>>>> >> > [sudo] password for ajitkhaparde: >> >> >> > >>>>> >> > ajitkhaparde is not allowed to run sudo on arm-dell. >> This incident will be reported. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > On Thu, Feb 18, 2021 at 10:03 AM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > On Thu, Feb 18, 2021 at 10:01 AM David Liu < >> dliu@iol.unh.edu> wrote: >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Hi Ajit, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > This is likely caused by when dts try to ssh into >> another machine as a normal user which will prompt you for the password. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > One solution would be "sudo su" as root to run the >> command line since you should have root access. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > David, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Let me try this method first. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > If it does not work, we could try with the public ssh >> keys. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > I will let you know. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Thanks >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Ajit >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Another solution would be to let me add your public >> ssh key into both machines. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Let me know if this helps. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Best, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > David >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > On Fri, Feb 12, 2021 at 5:48 PM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Thanks Owen. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > When I run the dts command line suggested, I get the >> following error. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Thanks >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Ajit >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Traceback (most recent call last): >> >> >> > >>>>> >> > File "/opt/dts/framework/ssh_pexpect.py", line 60, >> in _connect_host >> >> >> > >>>>> >> > self.password, original_prompt='[$#>]', >> password_regex=r'(?i)(?:password:)|(?:passphrase for key)|(?i)(password for >> .+:)') >> >> >> > >>>>> >> > File >> "/usr/local/lib/python3.6/dist-packages/pexpect/pxssh.py", line 440, in >> login >> >> >> > >>>>> >> > raise ExceptionPxssh('password refused') >> >> >> > >>>>> >> > pexpect.pxssh.ExceptionPxssh: password refused >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > ^^^^^^^^^^^^^^ >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > On Fri, Feb 12, 2021 at 12:09 PM Owen Hilyard < >> ohilyard@iol.unh.edu> wrote: >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Hello Ajit, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > There was a misconfiguration in our identity >> management system. The issue should now be resolved. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Owen Hilyard >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > On Thu, Feb 11, 2021 at 9:38 PM 'Ajit Khaparde' via >> dpdklab wrote: >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > David, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > I can use my credentials to login to rhea. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > But the same credentials are not allowing me to login >> onto the servers you provided. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Thanks >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Ajit >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > ssh -l ajitkhaparde arm-gigabyte.dpdklab.iol.unh.edu >> >> >> > >>>>> >> > Connection closed by 172.18.0.41 port 22 >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > ssh -l ajitkhaparde arm-dell.dpdklab.iol.unh.edu >> >> >> > >>>>> >> > Connection closed by 172.18.0.40 port 22 >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > On Tue, Feb 9, 2021 at 6:36 AM David Liu < >> dliu@iol.unh.edu> wrote: >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Hi Ajit, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Thanks for the update. Let me know if you need >> anything from me. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Best, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > David >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > On Sun, Feb 7, 2021 at 11:04 PM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > David, >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > I had some trouble with my system over the past week. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > So I could not login into the setup. I am hoping that >> my system will be restored early this week >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > I will login into the setup after that. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Thanks >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Ajit >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > On Tue, Feb 2, 2021 at 10:57 AM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Hi David, >> >> >> > >>>>> >> > I actually did miss it. I will take a look. >> >> >> > >>>>> >> > Thanks for the refresh mail. >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > Thanks >> >> >> > >>>>> >> > Ajit >> >> >> > >>>>> >> > >> >> >> > >>>>> >> > On Tue, Feb 2, 2021 at 8:58 AM David Liu < >> dliu@iol.unh.edu> wrote: >> >> >> > >>>>> >> > > >> >> >> > >>>>> >> > > Hi Ajit, >> >> >> > >>>>> >> > > >> >> >> > >>>>> >> > > Ping again in case if you miss the last email. >> >> >> > >>>>> >> > > >> >> >> > >>>>> >> > > Did you have a chance to give it a try on login to >> the machines? >> >> >> > >>>>> >> > > >> >> >> > >>>>> >> > > Just some notes, we are currently running compile >> and some performance/functional testing. >> >> >> > >>>>> >> > > Which it may be hard for you to run dts, so please >> let me know if you want me to stop these tests for you to debug. >> >> >> > >>>>> >> > > >> >> >> > >>>>> >> > > Step I run: >> >> >> > >>>>> >> > > CONF="conf_dpdk" ./switch.sh Broadcom #this is to >> switch the dts configuration to Broadcom >> >> >> > >>>>> >> > > ./dts -s >> #To start the dts >> >> >> > >>>>> >> > > >> >> >> > >>>>> >> > > Informatio: >> >> >> > >>>>> >> > > arm-dell.dpdklab.iol.unh.edu >> >> >> > >>>>> >> > > - dts - located in /opt/dts >> >> >> > >>>>> >> > > - Trex - located in /opt/trex/v2.87 >> >> >> > >>>>> >> > > >> >> >> > >>>>> >> > > arm-gigabyte.dpdklab.iol.unh.edu >> >> >> > >>>>> >> > > - dpdk - located in /root/dpdk >> >> >> > >>>>> >> > > >> >> >> > >>>>> >> > > Best, >> >> >> > >>>>> >> > > David >> >> >> > >>>>> >> > > >> >> >> > >>>>> >> > > On Tue, Jan 26, 2021 at 4:59 PM David Liu < >> dliu@iol.unh.edu> wrote: >> >> >> > >>>>> >> > >> >> >> >> > >>>>> >> > >> Also, I had changed the configuration when I run >> Broadcom nic. >> >> >> > >>>>> >> > >> In the dts folder, you can start it with ./dts -s >> >> >> > >>>>> >> > >> >> >> >> > >>>>> >> > >> On Tue, Jan 26, 2021 at 4:54 PM David Liu < >> dliu@iol.unh.edu> wrote: >> >> >> > >>>>> >> > >>> >> >> >> > >>>>> >> > >>> Hi Ajit, >> >> >> > >>>>> >> > >>> Sorry for the late reply. >> >> >> > >>>>> >> > >>> >> >> >> > >>>>> >> > >>> You can ssh into the machine using the same VPN >> Username and Password. >> >> >> > >>>>> >> > >>> Can you try and see if that works? >> >> >> > >>>>> >> > >>> >> >> >> > >>>>> >> > >>> Informatio: >> >> >> > >>>>> >> > >>> arm-dell.dpdklab.iol.unh.edu >> >> >> > >>>>> >> > >>> - dts - located in /opt/dts >> >> >> > >>>>> >> > >>> - Trex - located in /opt/trex/v2.87 >> >> >> > >>>>> >> > >>> >> >> >> > >>>>> >> > >>> arm-gigabyte.dpdklab.iol.unh.edu >> >> >> > >>>>> >> > >>> - dpdk - located in /root/dpdk >> >> >> > >>>>> >> > >>> >> >> >> > >>>>> >> > >>> >> >> >> > >>>>> >> > >>> Thanks, >> >> >> > >>>>> >> > >>> David >> >> >> > >>>>> >> > >>> >> >> >> > >>>>> >> > >>> On Tue, Jan 19, 2021 at 5:20 PM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> > >>>>> >> > >>>> >> >> >> > >>>>> >> > >>>> Hi David, >> >> >> > >>>>> >> > >>>> Thanks for pinging me. Do you think I could login >> into the setup and >> >> >> > >>>>> >> > >>>> see what is happening? >> >> >> > >>>>> >> > >>>> I do have the credentials for two systems in your >> lab - >> >> >> > >>>>> >> > >>>> rhea.dpdklab.iol.unh.edu and >> io.dpdklab.iol.unh.edu >> >> >> > >>>>> >> > >>>> If you can provide me details of the systems you >> are trying to >> >> >> > >>>>> >> > >>>> configure, I could take a look. >> >> >> > >>>>> >> > >>>> >> >> >> > >>>>> >> > >>>> Thanks >> >> >> > >>>>> >> > >>>> Ajit >> >> >> > >>>>> >> > >>>> >> >> >> > >>>>> >> > >>>> On Tue, Jan 19, 2021 at 1:41 PM David Liu < >> dliu@iol.unh.edu> wrote: >> >> >> > >>>>> >> > >>>> > >> >> >> > >>>>> >> > >>>> > Hi Ajit, >> >> >> > >>>>> >> > >>>> > >> >> >> > >>>>> >> > >>>> > Thank you for helping out. >> >> >> > >>>>> >> > >>>> > >> >> >> > >>>>> >> > >>>> > How are you doing with this issue? >> >> >> > >>>>> >> > >>>> > >> >> >> > >>>>> >> > >>>> > Please let me know if you need anything >> information from us. >> >> >> > >>>>> >> > >>>> > >> >> >> > >>>>> >> > >>>> > Just some extra information that both Trex and >> dts are on the same intel tester machine. >> >> >> > >>>>> >> > >>>> > >> >> >> > >>>>> >> > >>>> > Best, >> >> >> > >>>>> >> > >>>> > David >> >> >> > >>>>> >> > >>>> > >> >> >> > >>>>> >> > >>>> > On Thu, Jan 14, 2021 at 2:12 PM David Liu < >> dliu@iol.unh.edu> wrote: >> >> >> > >>>>> >> > >>>> >> >> >> >> > >>>>> >> > >>>> >> Yes, so this is the same NIC work on x86. >> >> >> > >>>>> >> > >>>> >> By seeing the link, I am assuming you mean the >> ports that are using for Trex. If so they are UP before I start the Trex. >> >> >> > >>>>> >> > >>>> >> >> >> >> > >>>>> >> > >>>> >> Thank, >> >> >> > >>>>> >> > >>>> >> David >> >> >> > >>>>> >> > >>>> >> >> >> >> > >>>>> >> > >>>> >> >> >> >> > >>>>> >> > >>>> >> On Thu, Jan 14, 2021 at 1:11 AM Ajit Khaparde < >> ajit.khaparde@broadcom.com> wrote: >> >> >> > >>>>> >> > >>>> >>> >> >> >> > >>>>> >> > >>>> >>> Does the same NIC work on x86? >> >> >> > >>>>> >> > >>>> >>> Also do you see link before you start the >> trex? I am trying to see if the port failed to successfully come up >> >> >> > >>>>> >> > >>>> >>> or if there is a problem with the link. Can >> you check and tell? >> >> >> > >>>>> >> > >>>> >>> >> >> >> > >>>>> >> > >>>> >>> Thanks >> >> >> > >>>>> >> > >>>> >>> Ajit >> >> >> > >>>>> >> > >>>> >>> >> >> >> > >>>>> >> > >>>> >>> On Wed, Jan 13, 2021 at 4:20 PM David Liu < >> dliu@iol.unh.edu> wrote: >> >> >> > >>>>> >> > >>>> >>>> >> >> >> > >>>>> >> > >>>> >>>> Hi Ajit, >> >> >> > >>>>> >> > >>>> >>>> >> >> >> > >>>>> >> > >>>> >>>> Thank you for helping out. >> >> >> > >>>>> >> > >>>> >>>> >> >> >> > >>>>> >> > >>>> >>>> We have it working on the x86, but not the >> Arm. >> >> >> > >>>>> >> > >>>> >>>> >> >> >> > >>>>> >> > >>>> >>>> >> >> >> > >>>>> >> > >>>> >>>> Thanks, >> >> >> > >>>>> >> > >>>> >>>> David >> >> >> > >>>>> >> > >>>> >>>> >> >> >> > >>>>> >> > >>>> >>>> On Wed, Jan 13, 2021 at 5:34 PM Ajit >> Khaparde wrote: >> >> >> > >>>>> >> > >>>> >>>>> >> >> >> > >>>>> >> > >>>> >>>>> Hi David, >> >> >> > >>>>> >> > >>>> >>>>> I will take a look. >> >> >> > >>>>> >> > >>>> >>>>> Do you see similar issues on x86? I am >> asking because >> >> >> > >>>>> >> > >>>> >>>>> even I would start with that to create a >> baseline and then >> >> >> > >>>>> >> > >>>> >>>>> attempt on ARM. >> >> >> > >>>>> >> > >>>> >>>>> >> >> >> > >>>>> >> > >>>> >>>>> Thanks >> >> >> > >>>>> >> > >>>> >>>>> Ajit >> >> >> > >>>>> >> > >>>> >>>>> >> >> >> > >>>>> >> > >>>> >>>>> On Wed, Jan 13, 2021 at 12:08 PM David Liu < >> dliu@iol.unh.edu> wrote: >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>> Hi Ajit, >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>> We have a 25G Broadcom NIC that is >> installed on an Arm machine. >> >> >> > >>>>> >> > >>>> >>>>>> And I am running into a problem when I try >> to run nic_single_core_perf on the NIC. >> >> >> > >>>>> >> > >>>> >>>>>> Currently, we are using: Trex v2.86 and >> dts from http://git.dpdk.org/tools/dts/ >> >> >> > >>>>> >> > >>>> >>>>>> All the NICs are up and running when >> testing. >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>> The problem is an error when I try to run >> the test case inside the nic_single_core_perf: >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>>> TestNicSingleCorePerf: Test running at >> parameters: framesize: 64, rxd/txd: 512 >> >> >> > >>>>> >> > >>>> >>>>>>> dut.172.18.0.41: >> x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 32,33 -n 4 >> --file-prefix=dpdk_15311_20210113190237 -a 0000:93:00.0 -a 0000:93:00.1 >> -- -i --portmask=0x3 --txd=512 --rxd=512 --nb-cores=1 >> >> >> > >>>>> >> > >>>> >>>>>>> dut.172.18.0.41: start >> >> >> > >>>>> >> > >>>> >>>>>>> TestNicSingleCorePerf: Test Case >> test_perf_nic_single_core Result ERROR: Traceback (most recent call last): >> >> >> > >>>>> >> > >>>> >>>>>>> File "/opt/dts/framework/test_case.py", >> line 319, in _execute_test_case >> >> >> > >>>>> >> > >>>> >>>>>>> case_obj() >> >> >> > >>>>> >> > >>>> >>>>>>> File >> "tests/TestSuite_nic_single_core_perf.py", line 196, in >> test_perf_nic_single_core >> >> >> > >>>>> >> > >>>> >>>>>>> self.perf_test(self.nb_ports) >> >> >> > >>>>> >> > >>>> >>>>>>> File >> "tests/TestSuite_nic_single_core_perf.py", line 270, in perf_test >> >> >> > >>>>> >> > >>>> >>>>>>> _, packets_received = >> self.tester.pktgen.measure_throughput(stream_ids=streams, >> options=traffic_opt) >> >> >> > >>>>> >> > >>>> >>>>>>> File >> "/opt/dts/framework/pktgen_base.py", line 245, in measure_throughput >> >> >> > >>>>> >> > >>>> >>>>>>> >> self._prepare_transmission(stream_ids=stream_ids) >> >> >> > >>>>> >> > >>>> >>>>>>> File >> "/opt/dts/framework/pktgen_trex.py", line 778, in _prepare_transmission >> >> >> > >>>>> >> > >>>> >>>>>>> self._conn.reset(ports=self._ports) >> >> >> > >>>>> >> > >>>> >>>>>>> File >> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py", >> line 51, in wrap2 >> >> >> > >>>>> >> > >>>> >>>>>>> ret = f(*args, **kwargs) >> >> >> > >>>>> >> > >>>> >>>>>>> File >> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py", >> line 339, in reset >> >> >> > >>>>> >> > >>>> >>>>>>> self.clear_stats(ports) >> >> >> > >>>>> >> > >>>> >>>>>>> File >> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py", >> line 51, in wrap2 >> >> >> > >>>>> >> > >>>> >>>>>>> ret = f(*args, **kwargs) >> >> >> > >>>>> >> > >>>> >>>>>>> File >> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py", >> line 1492, in clear_stats >> >> >> > >>>>> >> > >>>> >>>>>>> self._clear_stats_common(ports, >> clear_global, clear_xstats) >> >> >> > >>>>> >> > >>>> >>>>>>> File >> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_client.py", >> line 2876, in _clear_stats_common >> >> >> > >>>>> >> > >>>> >>>>>>> raise TRexError(rc) >> >> >> > >>>>> >> > >>>> >>>>>>> trex.common.trex_exceptions.TRexError: >> *** [RPC] - Failed to get server response from tcp://172.18.0.40:4501 >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>> I also try to run TRex in stateless mode >> with./t-rex-64 -i --cfg /etc/trex_cfg.yaml and connect with ./trex-console >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>> Then start sending traffic with command >> >> >> > >>>>> >> > >>>> >>>>>>> >> >> >> > >>>>> >> > >>>> >>>>>>> trex>start -f stl/imix.py >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>> But this will cause an error to turn off >> Trex. >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>>> trex> >> >> >> > >>>>> >> > >>>> >>>>>>> 2021-01-13 19:56:21 - [server][warning] >> - Server has been shutdown - cause: 'WATCHDOG: task 'Trex DP core 1' has >> not responded for more than 1.00135 seconds - timeout is 1 seconds >> >> >> > >>>>> >> > >>>> >>>>>>> *** traceback follows *** >> >> >> > >>>>> >> > >>>> >>>>>>> 1 0x561be173cf5a >> ./_t-rex-64(+0x19af5a) [0x561be173cf5a] >> >> >> > >>>>> >> > >>>> >>>>>>> 2 0x7feea3ac0980 >> /lib/x86_64-linux-gnu/libpthread.so.0(+0x12980) [0x7feea3ac0980] >> >> >> > >>>>> >> > >>>> >>>>>>> 3 0x561be1a05a2a rte_delay_us_block >> + 106 >> >> >> > >>>>> >> > >>>> >>>>>>> 4 0x561be16ce874 >> CCoreEthIF::send_burst(CCorePerPort*, unsigned short, >> CVirtualIFPerSideStats*) + 3220 >> >> >> > >>>>> >> > >>>> >>>>>>> 5 0x561be16abf57 >> CCoreEthIF::flush_tx_queue() + 31 >> >> >> > >>>>> >> > >>>> >>>>>>> 6 0x561be171e3d9 >> CNodeGenerator::handle_maintenance(CFlowGenListPerThread*) + 265 >> >> >> > >>>>> >> > >>>> >>>>>>> 7 0x561be171f7ec >> CNodeGenerator::handle_flow_sync(CGenNode*, CFlowGenListPerThread*, bool&) >> + 92 >> >> >> > >>>>> >> > >>>> >>>>>>> 8 0x561be171fc98 >> CNodeGenerator::handle_slow_messages(unsigned char, CGenNode*, >> CFlowGenListPerThread*, bool) + 184 >> >> >> > >>>>> >> > >>>> >>>>>>> 9 0x561be16cb5f1 int >> CNodeGenerator::flush_file_realtime<23, false>(double, double, >> CFlowGenListPerThread*, double&) + 881 >> >> >> > >>>>> >> > >>>> >>>>>>> 10 0x561be1905212 >> TrexStatelessDpCore::start_scheduler() + 226 >> >> >> > >>>>> >> > >>>> >>>>>>> 11 0x561be1883ae9 >> TrexDpCore::start() + 89 >> >> >> > >>>>> >> > >>>> >>>>>>> 12 0x561be1714113 >> CFlowGenListPerThread::start(std::__cxx11::basic_string> std::char_traits, std::allocator >&, CPreviewMode&) + 115 >> >> >> > >>>>> >> > >>>> >>>>>>> 13 0x561be16af8dd >> CGlobalTRex::run_in_core(unsigned char) + 487 >> >> >> > >>>>> >> > >>>> >>>>>>> 14 0x561be16d11ad >> ./_t-rex-64(+0x12f1ad) [0x561be16d11ad] >> >> >> > >>>>> >> > >>>> >>>>>>> 15 0x561be1a1dfaa eal_thread_loop + >> 426 >> >> >> > >>>>> >> > >>>> >>>>>>> 16 0x7feea3ab56db >> /lib/x86_64-linux-gnu/libpthread.so.0(+0x76db) [0x7feea3ab56db] >> >> >> > >>>>> >> > >>>> >>>>>>> 17 0x7feea2a8571f clone + 63 >> >> >> > >>>>> >> > >>>> >>>>>>> >> >> >> > >>>>> >> > >>>> >>>>>>> *** addr2line information follows *** >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ??:0 >> >> >> > >>>>> >> > >>>> >>>>>>> ' >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>> I believe if everything is working, this >> should not turn off trex but please correct me if I am wrong. >> >> >> > >>>>> >> > >>>> >>>>>> I wonder if you have any suggestion of how >> I can approach this issue? >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>> Best, >> >> >> > >>>>> >> > >>>> >>>>>> David >> >> >> > >>>>> >> > >>>> >>>>>> >> >> >> > >>>>> >> > >>>> >>>>>> >> >