Re: [PATCH v7 0/7] Introduce support for LoongArch architecture

Re: [PATCH v7 0/7] Introduce support for LoongArch architecture

[David Marchand]

On Fri, Sep 30, 2022 at 12:05 PM zhoumin <zhoumin@loongson.cn> wrote:
> On Fri, Sep 30, 2022 at 16:13, David Marchand wrote:
> > On Fri, Sep 30, 2022 at 10:02 AM Min Zhou <zhoumin@loongson.cn> wrote:
> >>
> >> The online documents of LoongArch architecture are here:
> >>      https://loongson.github.io/LoongArch-Documentation/README-EN.html
> >>
> >> The latest build tools for LoongArch (binary) can be downloaded from:
> >>      https://github.com/loongson/build-tools
> > Could you confirm which sources have been used to generate it? and
> > instructions to compile it?
>
> Only the cross compiler [1] is required. The instructions can be found in
> the new added file cross_build_dpdk_for_loongarch.rst. I had added the
> CI job for cross compiling DPDK for LoongArch in patch v7 7/7. The CI job
> can run successfully if without the GCC warning caused by vhost.

- Sorry, but those instructions are not useful.

Is this architecture support in upstream gcc not functional?

Maybe I missed the information.. I spent some time at the different
links in the docs and in github, but I always end up with a set of
headers, or binaries, and no reference to the exact sources that were
used.
I have limited trust in binaries uploaded somewhere in github.
I don't want to spend more time on this.

What I ask for, is clear instructions how to get the toolchain
sources, and how to generate this toolchain.


- About the vhost compilation issue, a fix in the same area of the
code is in progress.
It will take some time to get the fix.
I will postpone merging the last patch until the vhost fix is ready.
(I am rather confident all of this will be resolved by the time 22.11
is released).


>
> >> v7:
> >>      - rebase the patchset on the main repository
> >>      - add errno.h to rte_power_intrinsics.c according with
> >>        commit 72b452c5f259
> > Thanks, I will look at this last revision.
> >
> >
> > There is still one aspect that is unclear to me.
> > How will the DPDK community make sure changes won't break this
> > architecture? (I mean, runtime checks, not only compilation)
> > IOW, what do you plan to hook to our CI to test patches submitted to
> > the mailing list?
>
> We can send our machine to UNH lab, but it may take a long time.
>
> GHA seems to be a good choice. However, I found that the codes of CI
> runner of GHA [2] are arch-specific. So the CI runner currently cannot
> run on
> LoongArch machine.

I see.

The better solution is probably to go with "your" own CI so that that
LoongArch has runtime non regression (functional and performance)
tests.
See below.


>
> Are there other CI clients which are not arch-specific and can be used
> for DPDK?
> We can provide machines accessible by the public network. These machines run
> Loongnix-server system which was built based on the source rpms of CentOS 8.
> We can deploy DPDK CI client on these machines.

There is no "DPDK CI client" per se.

The DPDK project has a distributed CI made of at least 3 CI entities.

Those CI test patches and post reports via mail: the ovsrobot, Intel
CI and UNH lab.
A CI retrieves patches from patchwork, a set of scripts is available
in https://git.dpdk.org/tools/dpdk-ci/ (especially the poll-pw
script).

Then the way the patches are tested is something each CI handles on its side:
- the ovsrobot creates a branch per series under the ovsrobot/dpdk
github repository, and let GitHub action run (this is how your current
series has been tested in GHA),
- Intel CI have their own tool for which I have little detail,
- UNH lab have their infrastructure too, using some Jenkins iirc. They
provide a dashboard for reports
https://lab.dpdk.org/results/dashboard/ and to get all details and
logs.

The common point is that, at the end of testing a series, a test
report is sent to the (sender-restricted) test-report@ mailing list.

Those reports could be done per patch, but given the amount of patches
on the dev@ mailing list, the consensus is to test the whole series
and report back against the last patch of a series.

All of this is gathered by patchwork (the details of how it is done
are not 100% clear to me, maybe Ali can confirm later if a
modification is required).

If you look at your v7 series, you will see:
https://patchwork.dpdk.org/project/dpdk/list/?series=24929&state=%2A&archive=both
- ovsrobot: ci/github-robot link
http://mails.dpdk.org/archives/test-report/2022-September/310836.html
- Intel CI: ci/Intel-* links, for example on the compilation test
http://mails.dpdk.org/archives/test-report/2022-September/310822.html
- UNH lab: all ci/iol-* links, for example on the compilation test
http://mails.dpdk.org/archives/test-report/2022-September/310834.html

So what LoongSoon could do is setup some Loongnix systems with a
similar infrastructure and provide (native?) compilation and runtime
test reports.

I Cc'd a few people involved in all this.
And there is the ci@ mailing list where all CI people can discuss.


-- 
David Marchand

Re: [PATCH v7 0/7] Introduce support for LoongArch architecture

[zhoumin]

[-- Attachment #1: Type: text/plain, Size: 14977 bytes --]

Hi, David,

Thanks a lot for your helpful reply.


On Fri, Sep 30, 2022 at 22:20, David Marchand wrote:
> On Fri, Sep 30, 2022 at 12:05 PM zhoumin<zhoumin@loongson.cn>  wrote:
>> On Fri, Sep 30, 2022 at 16:13, David Marchand wrote:
>>> On Fri, Sep 30, 2022 at 10:02 AM Min Zhou<zhoumin@loongson.cn>  wrote:
>>>> The online documents of LoongArch architecture are here:
>>>>       https://loongson.github.io/LoongArch-Documentation/README-EN.html
>>>>
>>>> The latest build tools for LoongArch (binary) can be downloaded from:
>>>>       https://github.com/loongson/build-tools
>>> Could you confirm which sources have been used to generate it? and
>>> instructions to compile it?
>> Only the cross compiler [1] is required. The instructions can be found in
>> the new added file cross_build_dpdk_for_loongarch.rst. I had added the
>> CI job for cross compiling DPDK for LoongArch in patch v7 7/7. The CI job
>> can run successfully if without the GCC warning caused by vhost.
> - Sorry, but those instructions are not useful.
>
> Is this architecture support in upstream gcc not functional?
>
> Maybe I missed the information.. I spent some time at the different
> links in the docs and in github, but I always end up with a set of
> headers, or binaries, and no reference to the exact sources that were
> used.
> I have limited trust in binaries uploaded somewhere in github.
> I don't want to spend more time on this.
>
> What I ask for, is clear instructions how to get the toolchain
> sources, and how to generate this toolchain.

I'm Sorry, I misunderstood the 'instructions' you said. The process of
making the toolchain is a little complicated. So I made a script used to
generate the toolchain from source codes. The content of the script is
as follows:

#!/bin/bash

# Prepare the working directories
export SYSDIR=/tmp/la_cross_tools
mkdir -pv ${SYSDIR}
mkdir -pv ${SYSDIR}/downloads
mkdir -pv ${SYSDIR}/build
install -dv ${SYSDIR}/cross-tools
install -dv ${SYSDIR}/sysroot

set +h
umask 022
# Set the environment variables to be used next
export BUILDDIR="${SYSDIR}/build"
export DOWNLOADDIR="${SYSDIR}/downloads"
export LC_ALL=POSIX
export CROSS_HOST="$(echo $MACHTYPE | sed "s/$(echo $MACHTYPE | cut -d- 
-f2)/cross/")"
export CROSS_TARGET="loongarch64-unknown-linux-gnu"
export MABI="lp64d"
export BUILD64="-mabi=lp64d"
export PATH=${SYSDIR}/cross-tools/bin:/bin:/usr/bin
export JOBS=-j8
unset CFLAGS
unset CXXFLAGS

# Download the source code archives
pushd $DOWNLOADDIR
wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.19.tar.gz
wget https://ftp.gnu.org/gnu/gmp/gmp-6.2.1.tar.xz
wget https://www.mpfr.org/mpfr-4.1.0/mpfr-4.1.0.tar.xz
wget https://ftp.gnu.org/gnu/mpc/mpc-1.2.1.tar.gz
wget https://ftp.gnu.org/gnu/libc/glibc-2.36.tar.xz
popd

# Make and install the linux header files
tar xvf ${DOWNLOADDIR}/linux-5.19.tar.gz -C ${BUILDDIR}
pushd ${BUILDDIR}/linux-5.19
     make mrproper
     make ARCH=loongarch INSTALL_HDR_PATH=dest headers_install
     find dest/include -name '.*' -delete
     mkdir -pv ${SYSDIR}/sysroot/usr/include
     cp -rv dest/include/* ${SYSDIR}/sysroot/usr/include
popd

# Prepare the binutils source code
git clone git://sourceware.org/git/binutils-gdb.git --depth 1
pushd binutils-gdb
     git archive --format=tar.gz --prefix=binutils-2.38/ --output 
../binutils-2.38.tar.gz "master"
popd
mv binutils-2.38.tar.gz ${DOWNLOADDIR}

# Make and install the binutils files
tar xvf ${DOWNLOADDIR}/binutils-2.38.tar.gz -C ${BUILDDIR}
pushd ${BUILDDIR}/binutils-2.38
     rm -rf gdb* libdecnumber readline sim
     mkdir tools-build
     pushd tools-build
         CC=gcc AR=ar AS=as \
         ../configure --prefix=${SYSDIR}/cross-tools 
--build=${CROSS_HOST} --host=${CROSS_HOST} \
                      --target=${CROSS_TARGET} 
--with-sysroot=${SYSDIR}/sysroot --disable-nls \
                      --disable-static --disable-werror --enable-64-bit-bfd
         make configure-host ${JOBS}
         make ${JOBS}
         make install-strip
         cp -v ../include/libiberty.h ${SYSDIR}/sysroot/usr/include
     popd
popd

# Make and install the gmp files used by GCC
tar xvf ${DOWNLOADDIR}/gmp-6.2.1.tar.xz -C ${BUILDDIR}
pushd ${BUILDDIR}/gmp-6.2.1
     ./configure --prefix=${SYSDIR}/cross-tools --enable-cxx 
--disable-static
     make ${JOBS}
     make install
popd

# Make and install the mpfr files used by GCC
tar xvf ${DOWNLOADDIR}/mpfr-4.1.0.tar.xz -C ${BUILDDIR}
pushd ${BUILDDIR}/mpfr-4.1.0
     ./configure --prefix=${SYSDIR}/cross-tools --disable-static 
--with-gmp=${SYSDIR}/cross-tools
     make ${JOBS}
     make install
popd

# Make and install the mpc files used by GCC
tar xvf ${DOWNLOADDIR}/mpc-1.2.1.tar.gz -C ${BUILDDIR}
pushd ${BUILDDIR}/mpc-1.2.1
     ./configure --prefix=${SYSDIR}/cross-tools --disable-static 
--with-gmp=${SYSDIR}/cross-tools
     make ${JOBS}
     make install
popd

# Prepare the gcc source code
git clone git://sourceware.org/git/gcc.git --depth 1
pushd gcc
     git archive --format=tar.gz --prefix=gcc-13.0.0/ --output 
../gcc-13.0.0.tar.gz "master"
popd
mv gcc-13.0.0.tar.gz ${DOWNLOADDIR}

# Make and install the simplified GCC files
tar xvf ${DOWNLOADDIR}/gcc-13.0.0.tar.gz -C ${BUILDDIR}
pushd ${BUILDDIR}/gcc-13.0.0
     mkdir tools-build
     pushd tools-build
         AR=ar LDFLAGS="-Wl,-rpath,${SYSDIR}/cross-tools/lib" \
         ../configure --prefix=${SYSDIR}/cross-tools 
--build=${CROSS_HOST} --host=${CROSS_HOST} \
                      --target=${CROSS_TARGET} --disable-nls \
                      --with-mpfr=${SYSDIR}/cross-tools 
--with-gmp=${SYSDIR}/cross-tools \
                      --with-mpc=${SYSDIR}/cross-tools \
                      --with-newlib --disable-shared 
--with-sysroot=${SYSDIR}/sysroot \
                      --disable-decimal-float --disable-libgomp 
--disable-libitm \
                      --disable-libsanitizer --disable-libquadmath 
--disable-threads \
                      --disable-target-zlib --with-system-zlib 
--enable-checking=release \
                      --enable-default-pie \
                      --enable-languages=c
         make all-gcc all-target-libgcc ${JOBS}
         make install-strip-gcc install-strip-target-libgcc
     popd
popd

# Make and install the glibc files
tar xvf ${DOWNLOADDIR}/glibc-2.36.tar.xz -C ${BUILDDIR}
pushd ${BUILDDIR}/glibc-2.36
     sed -i "s@5.15.0@4.15.0@g" 
sysdeps/unix/sysv/linux/loongarch/configure{,.ac}
     mkdir -v build-64
     pushd build-64
         BUILD_CC="gcc" CC="${CROSS_TARGET}-gcc ${BUILD64}" \
         CXX="${CROSS_TARGET}-gcc ${BUILD64}" \
         AR="${CROSS_TARGET}-ar" RANLIB="${CROSS_TARGET}-ranlib" \
         ../configure --prefix=/usr --host=${CROSS_TARGET} 
--build=${CROSS_HOST} \
                      --libdir=/usr/lib64 --libexecdir=/usr/lib64/glibc \
                      --with-binutils=${SYSDIR}/cross-tools/bin \
                      --with-headers=${SYSDIR}/sysroot/usr/include \
                      --enable-stack-protector=strong --enable-add-ons \
                      --disable-werror libc_cv_slibdir=/usr/lib64 \
                      --enable-kernel=4.15
         make ${JOBS}
         make DESTDIR=${SYSDIR}/sysroot install
         cp -v ../nscd/nscd.conf ${SYSDIR}/sysroot/etc/nscd.conf
         mkdir -pv ${SYSDIR}/sysroot/var/cache/nscd
         install -v -Dm644 ../nscd/nscd.tmpfiles \
${SYSDIR}/sysroot/usr/lib/tmpfiles.d/nscd.conf
         install -v -Dm644 ../nscd/nscd.service \
${SYSDIR}/sysroot/usr/lib/systemd/system/nscd.service
     popd
     mkdir -v build-locale
     pushd build-locale
         ../configure --prefix=/usr --libdir=/usr/lib64 
--libexecdir=/usr/lib64/glibc \
                      --enable-stack-protector=strong --enable-add-ons \
                      --disable-werror libc_cv_slibdir=/usr/lib64
         make ${JOBS}
         make DESTDIR=${SYSDIR}/sysroot localedata/install-locales
     popd
popd

# Make and install the complete GCC files
tar xvf ${DOWNLOADDIR}/gcc-13.0.0.tar.gz -C ${BUILDDIR}
pushd ${BUILDDIR}/gcc-13.0.0
     mkdir tools-build-all
     pushd tools-build-all
         AR=ar LDFLAGS="-Wl,-rpath,${SYSDIR}/cross-tools/lib" \
         ../configure --prefix=${SYSDIR}/cross-tools --build=${CROSS_HOST} \
                      --host=${CROSS_HOST} --target=${CROSS_TARGET} \
                      --with-sysroot=${SYSDIR}/sysroot 
--with-mpfr=${SYSDIR}/cross-tools \
                      --with-gmp=${SYSDIR}/cross-tools 
--with-mpc=${SYSDIR}/cross-tools \
                      --enable-__cxa_atexit --enable-threads=posix 
--with-system-zlib \
                      --enable-libstdcxx-time --enable-checking=release \
                      --enable-default-pie \
--enable-languages=c,c++,fortran,objc,obj-c++,lto
         make ${JOBS}
         make install-strip
     popd
popd

I have tested the script on an x86 machine running CentOS 8 system.
I successfully used the toolchain generated by this script to cross
compiling DPDK for LoongArch. This script may take one hour to
complete, which depends on the speed of network and the performance
of machine used. This script requires at least 15G of disk space when
running.

> - About the vhost compilation issue, a fix in the same area of the
> code is in progress.
> It will take some time to get the fix.
> I will postpone merging the last patch until the vhost fix is ready.
> (I am rather confident all of this will be resolved by the time 22.11
> is released).

Thank you for your concern and efforts on this issue.

>>>> v7:
>>>>       - rebase the patchset on the main repository
>>>>       - add errno.h to rte_power_intrinsics.c according with
>>>>         commit 72b452c5f259
>>> Thanks, I will look at this last revision.
>>>
>>>
>>> There is still one aspect that is unclear to me.
>>> How will the DPDK community make sure changes won't break this
>>> architecture? (I mean, runtime checks, not only compilation)
>>> IOW, what do you plan to hook to our CI to test patches submitted to
>>> the mailing list?
>> We can send our machine to UNH lab, but it may take a long time.
>>
>> GHA seems to be a good choice. However, I found that the codes of CI
>> runner of GHA [2] are arch-specific. So the CI runner currently cannot
>> run on
>> LoongArch machine.
> I see.
>
> The better solution is probably to go with "your" own CI so that that
> LoongArch has runtime non regression (functional and performance)
> tests.
> See below.

Yes, we had spent some time building our own CI system and made the CI
system working internally. Our CI system based on Jenkins and DTS. Every
time we submit patch to our internal DPDK repository, the Jenkins will be
triggered to call DTS for testing the patch. But we have only run less than
100 unit tests currently. More test cases will be added later.

>> Are there other CI clients which are not arch-specific and can be used
>> for DPDK?
>> We can provide machines accessible by the public network. These machines run
>> Loongnix-server system which was built based on the source rpms of CentOS 8.
>> We can deploy DPDK CI client on these machines.
> There is no "DPDK CI client" per se.
>
> The DPDK project has a distributed CI made of at least 3 CI entities.
>
> Those CI test patches and post reports via mail: the ovsrobot, Intel
> CI and UNH lab.
> A CI retrieves patches from patchwork, a set of scripts is available
> inhttps://git.dpdk.org/tools/dpdk-ci/  (especially the poll-pw
> script).

This information is really very useful. Please forgive me for not taking
the time to study dpdk-ci. It sounds that dpdk-ci can help us to test
patches submitted to the mailing list for LoongArch.

> Then the way the patches are tested is something each CI handles on its side:
> - the ovsrobot creates a branch per series under the ovsrobot/dpdk
> github repository, and let GitHub action run (this is how your current
> series has been tested in GHA),
> - Intel CI have their own tool for which I have little detail,
> - UNH lab have their infrastructure too, using some Jenkins iirc. They
> provide a dashboard for reports
> https://lab.dpdk.org/results/dashboard/  and to get all details and
> logs.
>
> The common point is that, at the end of testing a series, a test
> report is sent to the (sender-restricted) test-report@ mailing list.

This process doesn't seem very complicated. We can build a CI system to
retrieve patches from patchwork by dpdk-ci and compile, test them on
Loongnix system. After completing those jobs, we will generate the test
report and send it to the test-report@ mailing list. But my concern is which
set of test cases we need to run. Besides, can patchwork gather the test
reports we sent and show them on the patch details web page?

> Those reports could be done per patch, but given the amount of patches
> on the dev@ mailing list, the consensus is to test the whole series
> and report back against the last patch of a series.
>
> All of this is gathered by patchwork (the details of how it is done
> are not 100% clear to me, maybe Ali can confirm later if a
> modification is required).

Thank you for your consideration.

> If you look at your v7 series, you will see:
> https://patchwork.dpdk.org/project/dpdk/list/?series=24929&state=%2A&archive=both
> - ovsrobot: ci/github-robot link
> http://mails.dpdk.org/archives/test-report/2022-September/310836.html
> - Intel CI: ci/Intel-* links, for example on the compilation test
> http://mails.dpdk.org/archives/test-report/2022-September/310822.html
> - UNH lab: all ci/iol-* links, for example on the compilation test
> http://mails.dpdk.org/archives/test-report/2022-September/310834.html
>
> So what LoongSoon could do is setup some Loongnix systems with a
> similar infrastructure and provide (native?) compilation and runtime
> test reports.

Yes, we will build the CI system talked above on Loongnix systems to
provide compilation and runtime test reports for DPDK on LoongArch machine.
But It will take some time to set up this system and make it run stably.
We will get this done as soon as possible.

> I Cc'd a few people involved in all this.
> And there is the ci@ mailing list where all CI people can discuss.

Thanks a lot for all your help.


--
Thanks,
Min Zhou

[-- Attachment #2: Type: text/html, Size: 20610 bytes --]

RE: [PATCH v7 0/7] Introduce support for LoongArch architecture

[Ali Alnubani]

> -----Original Message-----
> From: David Marchand <david.marchand@redhat.com>
> Sent: Friday, September 30, 2022 5:21 PM
> To: zhoumin <zhoumin@loongson.cn>
> Cc: NBU-Contact-Thomas Monjalon (EXTERNAL) <thomas@monjalon.net>;
> bruce.richardson@intel.com; anatoly.burakov@intel.com;
> qiming.yang@intel.com; Yuying.Zhang@intel.com; jgrajcia@cisco.com;
> konstantin.v.ananyev@yandex.ru; dev@dpdk.org; maobibo@loongson.cn;
> Aaron Conole <aconole@redhat.com>; Ali Alnubani <alialnu@nvidia.com>;
> dpdklab <dpdklab@iol.unh.edu>; ci@dpdk.org
> Subject: Re: [PATCH v7 0/7] Introduce support for LoongArch architecture
> 
> On Fri, Sep 30, 2022 at 12:05 PM zhoumin <zhoumin@loongson.cn> wrote:
> > On Fri, Sep 30, 2022 at 16:13, David Marchand wrote:
> > > On Fri, Sep 30, 2022 at 10:02 AM Min Zhou <zhoumin@loongson.cn>
> wrote:
> > >>
> > >> The online documents of LoongArch architecture are here:
> > >>      https://loongson.github.io/LoongArch-Documentation/README-
> EN.html
> > >>
> > >> The latest build tools for LoongArch (binary) can be downloaded from:
> > >>      https://github.com/loongson/build-tools
> > > Could you confirm which sources have been used to generate it? and
> > > instructions to compile it?
> >
> > Only the cross compiler [1] is required. The instructions can be found in
> > the new added file cross_build_dpdk_for_loongarch.rst. I had added the
> > CI job for cross compiling DPDK for LoongArch in patch v7 7/7. The CI job
> > can run successfully if without the GCC warning caused by vhost.
> 
> - Sorry, but those instructions are not useful.
> 
> Is this architecture support in upstream gcc not functional?
> 
> Maybe I missed the information.. I spent some time at the different
> links in the docs and in github, but I always end up with a set of
> headers, or binaries, and no reference to the exact sources that were
> used.
> I have limited trust in binaries uploaded somewhere in github.
> I don't want to spend more time on this.
> 
> What I ask for, is clear instructions how to get the toolchain
> sources, and how to generate this toolchain.
> 
> 
> - About the vhost compilation issue, a fix in the same area of the
> code is in progress.
> It will take some time to get the fix.
> I will postpone merging the last patch until the vhost fix is ready.
> (I am rather confident all of this will be resolved by the time 22.11
> is released).
> 
> 
> >
> > >> v7:
> > >>      - rebase the patchset on the main repository
> > >>      - add errno.h to rte_power_intrinsics.c according with
> > >>        commit 72b452c5f259
> > > Thanks, I will look at this last revision.
> > >
> > >
> > > There is still one aspect that is unclear to me.
> > > How will the DPDK community make sure changes won't break this
> > > architecture? (I mean, runtime checks, not only compilation)
> > > IOW, what do you plan to hook to our CI to test patches submitted to
> > > the mailing list?
> >
> > We can send our machine to UNH lab, but it may take a long time.
> >
> > GHA seems to be a good choice. However, I found that the codes of CI
> > runner of GHA [2] are arch-specific. So the CI runner currently cannot
> > run on
> > LoongArch machine.
> 
> I see.
> 
> The better solution is probably to go with "your" own CI so that that
> LoongArch has runtime non regression (functional and performance)
> tests.
> See below.
> 
> 
> >
> > Are there other CI clients which are not arch-specific and can be used
> > for DPDK?
> > We can provide machines accessible by the public network. These
> machines run
> > Loongnix-server system which was built based on the source rpms of
> CentOS 8.
> > We can deploy DPDK CI client on these machines.
> 
> There is no "DPDK CI client" per se.
> 
> The DPDK project has a distributed CI made of at least 3 CI entities.
> 
> Those CI test patches and post reports via mail: the ovsrobot, Intel
> CI and UNH lab.
> A CI retrieves patches from patchwork, a set of scripts is available
> in https://git.dpdk.org/tools/dpdk-ci/ (especially the poll-pw
> script).
> 
> Then the way the patches are tested is something each CI handles on its side:
> - the ovsrobot creates a branch per series under the ovsrobot/dpdk
> github repository, and let GitHub action run (this is how your current
> series has been tested in GHA),
> - Intel CI have their own tool for which I have little detail,
> - UNH lab have their infrastructure too, using some Jenkins iirc. They
> provide a dashboard for reports
> https://lab.dpdk.org/results/dashboard/ and to get all details and
> logs.
> 
> The common point is that, at the end of testing a series, a test
> report is sent to the (sender-restricted) test-report@ mailing list.
> 
> Those reports could be done per patch, but given the amount of patches
> on the dev@ mailing list, the consensus is to test the whole series
> and report back against the last patch of a series.
> 
> All of this is gathered by patchwork (the details of how it is done
> are not 100% clear to me, maybe Ali can confirm later if a
> modification is required).

A few more things to add:
Labs can either use "dpdk-ci:tools/poll-pw" to pull the patches/patchsets from the Events API endpoint (https://patches.dpdk.org/api/events), or they can use their own scripts. Events API objects should be filtered by the categories "patch-completed" or "series-completed".
The script "dpdk-ci:tools/send-patch-report.sh" can be used to send reports to the mailing list in the expected report format.
The dpdk.org servers take care of adding the report results to Patchwork once they are in the test-report archives.

> 
> If you look at your v7 series, you will see:
> https://patchwork.dpdk.org/project/dpdk/list/?series=24929&state=%2A&a
> rchive=both
> - ovsrobot: ci/github-robot link
> http://mails.dpdk.org/archives/test-report/2022-September/310836.html
> - Intel CI: ci/Intel-* links, for example on the compilation test
> http://mails.dpdk.org/archives/test-report/2022-September/310822.html
> - UNH lab: all ci/iol-* links, for example on the compilation test
> http://mails.dpdk.org/archives/test-report/2022-September/310834.html
> 
> So what LoongSoon could do is setup some Loongnix systems with a
> similar infrastructure and provide (native?) compilation and runtime
> test reports.
> 
> I Cc'd a few people involved in all this.
> And there is the ci@ mailing list where all CI people can discuss.
> 
> 
> --
> David Marchand

Re: [PATCH v7 0/7] Introduce support for LoongArch architecture

[zhoumin]

Hi, Ali,

Thanks for your kind reply.


On Mon, Oct 3, 2022 at 16:14, Ali Alnubani wrote:
>> -----Original Message-----
>> From: David Marchand <david.marchand@redhat.com>
>> Sent: Friday, September 30, 2022 5:21 PM
>> To: zhoumin <zhoumin@loongson.cn>
>> Cc: NBU-Contact-Thomas Monjalon (EXTERNAL) <thomas@monjalon.net>;
>> bruce.richardson@intel.com; anatoly.burakov@intel.com;
>> qiming.yang@intel.com; Yuying.Zhang@intel.com; jgrajcia@cisco.com;
>> konstantin.v.ananyev@yandex.ru; dev@dpdk.org; maobibo@loongson.cn;
>> Aaron Conole <aconole@redhat.com>; Ali Alnubani <alialnu@nvidia.com>;
>> dpdklab <dpdklab@iol.unh.edu>; ci@dpdk.org
>> Subject: Re: [PATCH v7 0/7] Introduce support for LoongArch architecture
>>
>> On Fri, Sep 30, 2022 at 12:05 PM zhoumin <zhoumin@loongson.cn> wrote:
>>> On Fri, Sep 30, 2022 at 16:13, David Marchand wrote:
>>>> On Fri, Sep 30, 2022 at 10:02 AM Min Zhou <zhoumin@loongson.cn>
>> wrote:
>>>>> The online documents of LoongArch architecture are here:
>>>>>       https://loongson.github.io/LoongArch-Documentation/README-
>> EN.html
>>>>> The latest build tools for LoongArch (binary) can be downloaded from:
>>>>>       https://github.com/loongson/build-tools
>>>> Could you confirm which sources have been used to generate it? and
>>>> instructions to compile it?
>>> Only the cross compiler [1] is required. The instructions can be found in
>>> the new added file cross_build_dpdk_for_loongarch.rst. I had added the
>>> CI job for cross compiling DPDK for LoongArch in patch v7 7/7. The CI job
>>> can run successfully if without the GCC warning caused by vhost.
>> - Sorry, but those instructions are not useful.
>>
>> Is this architecture support in upstream gcc not functional?
>>
>> Maybe I missed the information.. I spent some time at the different
>> links in the docs and in github, but I always end up with a set of
>> headers, or binaries, and no reference to the exact sources that were
>> used.
>> I have limited trust in binaries uploaded somewhere in github.
>> I don't want to spend more time on this.
>>
>> What I ask for, is clear instructions how to get the toolchain
>> sources, and how to generate this toolchain.
>>
>>
>> - About the vhost compilation issue, a fix in the same area of the
>> code is in progress.
>> It will take some time to get the fix.
>> I will postpone merging the last patch until the vhost fix is ready.
>> (I am rather confident all of this will be resolved by the time 22.11
>> is released).
>>
>>
>>>>> v7:
>>>>>       - rebase the patchset on the main repository
>>>>>       - add errno.h to rte_power_intrinsics.c according with
>>>>>         commit 72b452c5f259
>>>> Thanks, I will look at this last revision.
>>>>
>>>>
>>>> There is still one aspect that is unclear to me.
>>>> How will the DPDK community make sure changes won't break this
>>>> architecture? (I mean, runtime checks, not only compilation)
>>>> IOW, what do you plan to hook to our CI to test patches submitted to
>>>> the mailing list?
>>> We can send our machine to UNH lab, but it may take a long time.
>>>
>>> GHA seems to be a good choice. However, I found that the codes of CI
>>> runner of GHA [2] are arch-specific. So the CI runner currently cannot
>>> run on
>>> LoongArch machine.
>> I see.
>>
>> The better solution is probably to go with "your" own CI so that that
>> LoongArch has runtime non regression (functional and performance)
>> tests.
>> See below.
>>
>>
>>> Are there other CI clients which are not arch-specific and can be used
>>> for DPDK?
>>> We can provide machines accessible by the public network. These
>> machines run
>>> Loongnix-server system which was built based on the source rpms of
>> CentOS 8.
>>> We can deploy DPDK CI client on these machines.
>> There is no "DPDK CI client" per se.
>>
>> The DPDK project has a distributed CI made of at least 3 CI entities.
>>
>> Those CI test patches and post reports via mail: the ovsrobot, Intel
>> CI and UNH lab.
>> A CI retrieves patches from patchwork, a set of scripts is available
>> in https://git.dpdk.org/tools/dpdk-ci/ (especially the poll-pw
>> script).
>>
>> Then the way the patches are tested is something each CI handles on its side:
>> - the ovsrobot creates a branch per series under the ovsrobot/dpdk
>> github repository, and let GitHub action run (this is how your current
>> series has been tested in GHA),
>> - Intel CI have their own tool for which I have little detail,
>> - UNH lab have their infrastructure too, using some Jenkins iirc. They
>> provide a dashboard for reports
>> https://lab.dpdk.org/results/dashboard/ and to get all details and
>> logs.
>>
>> The common point is that, at the end of testing a series, a test
>> report is sent to the (sender-restricted) test-report@ mailing list.
>>
>> Those reports could be done per patch, but given the amount of patches
>> on the dev@ mailing list, the consensus is to test the whole series
>> and report back against the last patch of a series.
>>
>> All of this is gathered by patchwork (the details of how it is done
>> are not 100% clear to me, maybe Ali can confirm later if a
>> modification is required).
> A few more things to add:
> Labs can either use "dpdk-ci:tools/poll-pw" to pull the patches/patchsets from the Events API endpoint (https://patches.dpdk.org/api/events), or they can use their own scripts. Events API objects should be filtered by the categories "patch-completed" or "series-completed".


Yes! The scripts in the "dpdk-ci:tools/" are very useful, especially 
"poll-pw". We are building an internal CI system for LoongArch based on 
the dpdk-ci scripts and the Events API.


> The script "dpdk-ci:tools/send-patch-report.sh" can be used to send reports to the mailing list in the expected report format.


OK! It seems that the administer of mailing list should add the mail 
sender of LoongArch CI system to the whitelist. After that, the test 
reports from LoongArch CI system will not be blocked.


> The dpdk.org servers take care of adding the report results to Patchwork once they are in the test-report archives.


Thanks a lot. That is also my concerns. The dpdk.org servers are 
responsible for adding the report results to Patchwork.


>> If you look at your v7 series, you will see:
>> https://patchwork.dpdk.org/project/dpdk/list/?series=24929&state=%2A&a
>> rchive=both
>> - ovsrobot: ci/github-robot link
>> http://mails.dpdk.org/archives/test-report/2022-September/310836.html
>> - Intel CI: ci/Intel-* links, for example on the compilation test
>> http://mails.dpdk.org/archives/test-report/2022-September/310822.html
>> - UNH lab: all ci/iol-* links, for example on the compilation test
>> http://mails.dpdk.org/archives/test-report/2022-September/310834.html
>>
>> So what LoongSoon could do is setup some Loongnix systems with a
>> similar infrastructure and provide (native?) compilation and runtime
>> test reports.
>>
>> I Cc'd a few people involved in all this.
>> And there is the ci@ mailing list where all CI people can discuss.
>>
>>
>> --
>> David Marchand

Re: [PATCH v7 0/7] Introduce support for LoongArch architecture

[David Marchand]

Hello Min,

On Sat, Oct 1, 2022 at 4:26 PM zhoumin <zhoumin@loongson.cn> wrote:
> I'm Sorry, I misunderstood the 'instructions' you said. The process of
> making the toolchain is a little complicated. So I made a script used to
> generate the toolchain from source codes. The content of the script is
> as follows:
>

I successfully generated a cross compilation toolchain with this script.

I ran this script in a UBI8 image (iow RHEL8), with the
codeready-builder-for-rhel-8-x86_64-rpms repo enabled and the
following packages installed:
# subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms
# dnf install bison diffutils file flex gcc gcc-c++ git gmp-devel
libtool make python3 rsync texinfo wget xz zlib-devel

The script below works, but it is really better to run it with -e.

# bash -e $script


> #!/bin/bash
>
> # Prepare the working directories
> export SYSDIR=/tmp/la_cross_tools
> mkdir -pv ${SYSDIR}
> mkdir -pv ${SYSDIR}/downloads
> mkdir -pv ${SYSDIR}/build
> install -dv ${SYSDIR}/cross-tools
> install -dv ${SYSDIR}/sysroot
>
> set +h
> umask 022
> # Set the environment variables to be used next
> export BUILDDIR="${SYSDIR}/build"
> export DOWNLOADDIR="${SYSDIR}/downloads"
> export LC_ALL=POSIX
> export CROSS_HOST="$(echo $MACHTYPE | sed "s/$(echo $MACHTYPE | cut -d- -f2)/cross/")"
> export CROSS_TARGET="loongarch64-unknown-linux-gnu"
> export MABI="lp64d"
> export BUILD64="-mabi=lp64d"
> export PATH=${SYSDIR}/cross-tools/bin:/bin:/usr/bin
> export JOBS=-j8
> unset CFLAGS
> unset CXXFLAGS
>
> # Download the source code archives
> pushd $DOWNLOADDIR
> wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.19.tar.gz
> wget https://ftp.gnu.org/gnu/gmp/gmp-6.2.1.tar.xz
> wget https://www.mpfr.org/mpfr-4.1.0/mpfr-4.1.0.tar.xz
> wget https://ftp.gnu.org/gnu/mpc/mpc-1.2.1.tar.gz
> wget https://ftp.gnu.org/gnu/libc/glibc-2.36.tar.xz
> popd
>
> # Make and install the linux header files
> tar xvf ${DOWNLOADDIR}/linux-5.19.tar.gz -C ${BUILDDIR}
> pushd ${BUILDDIR}/linux-5.19
>     make mrproper
>     make ARCH=loongarch INSTALL_HDR_PATH=dest headers_install
>     find dest/include -name '.*' -delete
>     mkdir -pv ${SYSDIR}/sysroot/usr/include
>     cp -rv dest/include/* ${SYSDIR}/sysroot/usr/include
> popd
>
> # Prepare the binutils source code
> git clone git://sourceware.org/git/binutils-gdb.git --depth 1
> pushd binutils-gdb
>     git archive --format=tar.gz --prefix=binutils-2.38/ --output ../binutils-2.38.tar.gz "master"
> popd
> mv binutils-2.38.tar.gz ${DOWNLOADDIR}
>
> # Make and install the binutils files
> tar xvf ${DOWNLOADDIR}/binutils-2.38.tar.gz -C ${BUILDDIR}
> pushd ${BUILDDIR}/binutils-2.38
>     rm -rf gdb* libdecnumber readline sim
>     mkdir tools-build
>     pushd tools-build
>         CC=gcc AR=ar AS=as \
>         ../configure --prefix=${SYSDIR}/cross-tools --build=${CROSS_HOST} --host=${CROSS_HOST} \
>                      --target=${CROSS_TARGET} --with-sysroot=${SYSDIR}/sysroot --disable-nls \
>                      --disable-static --disable-werror --enable-64-bit-bfd
>         make configure-host ${JOBS}
>         make ${JOBS}
>         make install-strip
>         cp -v ../include/libiberty.h ${SYSDIR}/sysroot/usr/include
>     popd
> popd
>
> # Make and install the gmp files used by GCC
> tar xvf ${DOWNLOADDIR}/gmp-6.2.1.tar.xz -C ${BUILDDIR}
> pushd ${BUILDDIR}/gmp-6.2.1
>     ./configure --prefix=${SYSDIR}/cross-tools --enable-cxx --disable-static
>     make ${JOBS}
>     make install
> popd
>
> # Make and install the mpfr files used by GCC
> tar xvf ${DOWNLOADDIR}/mpfr-4.1.0.tar.xz -C ${BUILDDIR}
> pushd ${BUILDDIR}/mpfr-4.1.0
>     ./configure --prefix=${SYSDIR}/cross-tools --disable-static --with-gmp=${SYSDIR}/cross-tools
>     make ${JOBS}
>     make install
> popd
>
> # Make and install the mpc files used by GCC
> tar xvf ${DOWNLOADDIR}/mpc-1.2.1.tar.gz -C ${BUILDDIR}
> pushd ${BUILDDIR}/mpc-1.2.1
>     ./configure --prefix=${SYSDIR}/cross-tools --disable-static --with-gmp=${SYSDIR}/cross-tools
>     make ${JOBS}
>     make install
> popd
>
> # Prepare the gcc source code
> git clone git://sourceware.org/git/gcc.git --depth 1
> pushd gcc
>     git archive --format=tar.gz --prefix=gcc-13.0.0/ --output ../gcc-13.0.0.tar.gz "master"
> popd
> mv gcc-13.0.0.tar.gz ${DOWNLOADDIR}
>
> # Make and install the simplified GCC files
> tar xvf ${DOWNLOADDIR}/gcc-13.0.0.tar.gz -C ${BUILDDIR}
> pushd ${BUILDDIR}/gcc-13.0.0
>     mkdir tools-build
>     pushd tools-build
>         AR=ar LDFLAGS="-Wl,-rpath,${SYSDIR}/cross-tools/lib" \
>         ../configure --prefix=${SYSDIR}/cross-tools --build=${CROSS_HOST} --host=${CROSS_HOST} \
>                      --target=${CROSS_TARGET} --disable-nls \
>                      --with-mpfr=${SYSDIR}/cross-tools --with-gmp=${SYSDIR}/cross-tools \
>                      --with-mpc=${SYSDIR}/cross-tools \
>                      --with-newlib --disable-shared --with-sysroot=${SYSDIR}/sysroot \
>                      --disable-decimal-float --disable-libgomp --disable-libitm \
>                      --disable-libsanitizer --disable-libquadmath --disable-threads \
>                      --disable-target-zlib --with-system-zlib --enable-checking=release \
>                      --enable-default-pie \
>                      --enable-languages=c
>         make all-gcc all-target-libgcc ${JOBS}
>         make install-strip-gcc install-strip-target-libgcc
>     popd
> popd
>
> # Make and install the glibc files
> tar xvf ${DOWNLOADDIR}/glibc-2.36.tar.xz -C ${BUILDDIR}
> pushd ${BUILDDIR}/glibc-2.36
>     sed -i "s@5.15.0@4.15.0@g" sysdeps/unix/sysv/linux/loongarch/configure{,.ac}
>     mkdir -v build-64
>     pushd build-64
>         BUILD_CC="gcc" CC="${CROSS_TARGET}-gcc ${BUILD64}" \
>         CXX="${CROSS_TARGET}-gcc ${BUILD64}" \
>         AR="${CROSS_TARGET}-ar" RANLIB="${CROSS_TARGET}-ranlib" \
>         ../configure --prefix=/usr --host=${CROSS_TARGET} --build=${CROSS_HOST} \
>                      --libdir=/usr/lib64 --libexecdir=/usr/lib64/glibc \
>                      --with-binutils=${SYSDIR}/cross-tools/bin \
>                      --with-headers=${SYSDIR}/sysroot/usr/include \
>                      --enable-stack-protector=strong --enable-add-ons \
>                      --disable-werror libc_cv_slibdir=/usr/lib64 \
>                      --enable-kernel=4.15
>         make ${JOBS}
>         make DESTDIR=${SYSDIR}/sysroot install
>         cp -v ../nscd/nscd.conf ${SYSDIR}/sysroot/etc/nscd.conf
>         mkdir -pv ${SYSDIR}/sysroot/var/cache/nscd
>         install -v -Dm644 ../nscd/nscd.tmpfiles \
>                           ${SYSDIR}/sysroot/usr/lib/tmpfiles.d/nscd.conf
>         install -v -Dm644 ../nscd/nscd.service \
>                           ${SYSDIR}/sysroot/usr/lib/systemd/system/nscd.service
>     popd
>     mkdir -v build-locale
>     pushd build-locale
>         ../configure --prefix=/usr --libdir=/usr/lib64 --libexecdir=/usr/lib64/glibc \
>                      --enable-stack-protector=strong --enable-add-ons \
>                      --disable-werror libc_cv_slibdir=/usr/lib64
>         make ${JOBS}
>         make DESTDIR=${SYSDIR}/sysroot localedata/install-locales
>     popd
> popd
>
> # Make and install the complete GCC files
> tar xvf ${DOWNLOADDIR}/gcc-13.0.0.tar.gz -C ${BUILDDIR}
> pushd ${BUILDDIR}/gcc-13.0.0
>     mkdir tools-build-all
>     pushd tools-build-all
>         AR=ar LDFLAGS="-Wl,-rpath,${SYSDIR}/cross-tools/lib" \
>         ../configure --prefix=${SYSDIR}/cross-tools --build=${CROSS_HOST} \
>                      --host=${CROSS_HOST} --target=${CROSS_TARGET} \
>                      --with-sysroot=${SYSDIR}/sysroot --with-mpfr=${SYSDIR}/cross-tools \
>                      --with-gmp=${SYSDIR}/cross-tools --with-mpc=${SYSDIR}/cross-tools \
>                      --enable-__cxa_atexit --enable-threads=posix --with-system-zlib \
>                      --enable-libstdcxx-time --enable-checking=release \
>                      --enable-default-pie \
>                      --enable-languages=c,c++,fortran,objc,obj-c++,lto
>         make ${JOBS}
>         make install-strip
>     popd
> popd
>


-- 
David Marchand

Re: [PATCH v7 0/7] Introduce support for LoongArch architecture

[zhoumin]

Hi, David,

Thanks for your kind reply.


On Tue, Oct 4, 2022 at 00:30, David Marchand wrote:
> Hello Min,
>
> On Sat, Oct 1, 2022 at 4:26 PM zhoumin <zhoumin@loongson.cn> wrote:
>> I'm Sorry, I misunderstood the 'instructions' you said. The process of
>> making the toolchain is a little complicated. So I made a script used to
>> generate the toolchain from source codes. The content of the script is
>> as follows:
>>
> I successfully generated a cross compilation toolchain with this script.
>
> I ran this script in a UBI8 image (iow RHEL8), with the
> codeready-builder-for-rhel-8-x86_64-rpms repo enabled and the
> following packages installed:
> # subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms
> # dnf install bison diffutils file flex gcc gcc-c++ git gmp-devel
> libtool make python3 rsync texinfo wget xz zlib-devel


I'm sorry. I forgot to give the dependencies for build the cross 
compilation toolchain. These

dependencies can be added into the documentation for LoongArch. Thanks a 
lot.


> The script below works, but it is really better to run it with -e.
>
> # bash -e $script


Yes, thanks. The script will run for a long time. It is better to run it 
with -e in order to exit quickly when an error has occured.


>
>> #!/bin/bash
>>
>> # Prepare the working directories
>> export SYSDIR=/tmp/la_cross_tools
>> mkdir -pv ${SYSDIR}
>> mkdir -pv ${SYSDIR}/downloads
>> mkdir -pv ${SYSDIR}/build
>> install -dv ${SYSDIR}/cross-tools
>> install -dv ${SYSDIR}/sysroot
>>
>> set +h
>> umask 022
>> # Set the environment variables to be used next
>> export BUILDDIR="${SYSDIR}/build"
>> export DOWNLOADDIR="${SYSDIR}/downloads"
>> export LC_ALL=POSIX
>> export CROSS_HOST="$(echo $MACHTYPE | sed "s/$(echo $MACHTYPE | cut -d- -f2)/cross/")"
>> export CROSS_TARGET="loongarch64-unknown-linux-gnu"
>> export MABI="lp64d"
>> export BUILD64="-mabi=lp64d"
>> export PATH=${SYSDIR}/cross-tools/bin:/bin:/usr/bin
>> export JOBS=-j8
>> unset CFLAGS
>> unset CXXFLAGS
>>
>> # Download the source code archives
>> pushd $DOWNLOADDIR
>> wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.19.tar.gz
>> wget https://ftp.gnu.org/gnu/gmp/gmp-6.2.1.tar.xz
>> wget https://www.mpfr.org/mpfr-4.1.0/mpfr-4.1.0.tar.xz
>> wget https://ftp.gnu.org/gnu/mpc/mpc-1.2.1.tar.gz
>> wget https://ftp.gnu.org/gnu/libc/glibc-2.36.tar.xz
>> popd
>>
>> # Make and install the linux header files
>> tar xvf ${DOWNLOADDIR}/linux-5.19.tar.gz -C ${BUILDDIR}
>> pushd ${BUILDDIR}/linux-5.19
>>      make mrproper
>>      make ARCH=loongarch INSTALL_HDR_PATH=dest headers_install
>>      find dest/include -name '.*' -delete
>>      mkdir -pv ${SYSDIR}/sysroot/usr/include
>>      cp -rv dest/include/* ${SYSDIR}/sysroot/usr/include
>> popd
>>
>> # Prepare the binutils source code
>> git clone git://sourceware.org/git/binutils-gdb.git --depth 1
>> pushd binutils-gdb
>>      git archive --format=tar.gz --prefix=binutils-2.38/ --output ../binutils-2.38.tar.gz "master"
>> popd
>> mv binutils-2.38.tar.gz ${DOWNLOADDIR}
>>
>> # Make and install the binutils files
>> tar xvf ${DOWNLOADDIR}/binutils-2.38.tar.gz -C ${BUILDDIR}
>> pushd ${BUILDDIR}/binutils-2.38
>>      rm -rf gdb* libdecnumber readline sim
>>      mkdir tools-build
>>      pushd tools-build
>>          CC=gcc AR=ar AS=as \
>>          ../configure --prefix=${SYSDIR}/cross-tools --build=${CROSS_HOST} --host=${CROSS_HOST} \
>>                       --target=${CROSS_TARGET} --with-sysroot=${SYSDIR}/sysroot --disable-nls \
>>                       --disable-static --disable-werror --enable-64-bit-bfd
>>          make configure-host ${JOBS}
>>          make ${JOBS}
>>          make install-strip
>>          cp -v ../include/libiberty.h ${SYSDIR}/sysroot/usr/include
>>      popd
>> popd
>>
>> # Make and install the gmp files used by GCC
>> tar xvf ${DOWNLOADDIR}/gmp-6.2.1.tar.xz -C ${BUILDDIR}
>> pushd ${BUILDDIR}/gmp-6.2.1
>>      ./configure --prefix=${SYSDIR}/cross-tools --enable-cxx --disable-static
>>      make ${JOBS}
>>      make install
>> popd
>>
>> # Make and install the mpfr files used by GCC
>> tar xvf ${DOWNLOADDIR}/mpfr-4.1.0.tar.xz -C ${BUILDDIR}
>> pushd ${BUILDDIR}/mpfr-4.1.0
>>      ./configure --prefix=${SYSDIR}/cross-tools --disable-static --with-gmp=${SYSDIR}/cross-tools
>>      make ${JOBS}
>>      make install
>> popd
>>
>> # Make and install the mpc files used by GCC
>> tar xvf ${DOWNLOADDIR}/mpc-1.2.1.tar.gz -C ${BUILDDIR}
>> pushd ${BUILDDIR}/mpc-1.2.1
>>      ./configure --prefix=${SYSDIR}/cross-tools --disable-static --with-gmp=${SYSDIR}/cross-tools
>>      make ${JOBS}
>>      make install
>> popd
>>
>> # Prepare the gcc source code
>> git clone git://sourceware.org/git/gcc.git --depth 1
>> pushd gcc
>>      git archive --format=tar.gz --prefix=gcc-13.0.0/ --output ../gcc-13.0.0.tar.gz "master"
>> popd
>> mv gcc-13.0.0.tar.gz ${DOWNLOADDIR}
>>
>> # Make and install the simplified GCC files
>> tar xvf ${DOWNLOADDIR}/gcc-13.0.0.tar.gz -C ${BUILDDIR}
>> pushd ${BUILDDIR}/gcc-13.0.0
>>      mkdir tools-build
>>      pushd tools-build
>>          AR=ar LDFLAGS="-Wl,-rpath,${SYSDIR}/cross-tools/lib" \
>>          ../configure --prefix=${SYSDIR}/cross-tools --build=${CROSS_HOST} --host=${CROSS_HOST} \
>>                       --target=${CROSS_TARGET} --disable-nls \
>>                       --with-mpfr=${SYSDIR}/cross-tools --with-gmp=${SYSDIR}/cross-tools \
>>                       --with-mpc=${SYSDIR}/cross-tools \
>>                       --with-newlib --disable-shared --with-sysroot=${SYSDIR}/sysroot \
>>                       --disable-decimal-float --disable-libgomp --disable-libitm \
>>                       --disable-libsanitizer --disable-libquadmath --disable-threads \
>>                       --disable-target-zlib --with-system-zlib --enable-checking=release \
>>                       --enable-default-pie \
>>                       --enable-languages=c
>>          make all-gcc all-target-libgcc ${JOBS}
>>          make install-strip-gcc install-strip-target-libgcc
>>      popd
>> popd
>>
>> # Make and install the glibc files
>> tar xvf ${DOWNLOADDIR}/glibc-2.36.tar.xz -C ${BUILDDIR}
>> pushd ${BUILDDIR}/glibc-2.36
>>      sed -i "s@5.15.0@4.15.0@g" sysdeps/unix/sysv/linux/loongarch/configure{,.ac}
>>      mkdir -v build-64
>>      pushd build-64
>>          BUILD_CC="gcc" CC="${CROSS_TARGET}-gcc ${BUILD64}" \
>>          CXX="${CROSS_TARGET}-gcc ${BUILD64}" \
>>          AR="${CROSS_TARGET}-ar" RANLIB="${CROSS_TARGET}-ranlib" \
>>          ../configure --prefix=/usr --host=${CROSS_TARGET} --build=${CROSS_HOST} \
>>                       --libdir=/usr/lib64 --libexecdir=/usr/lib64/glibc \
>>                       --with-binutils=${SYSDIR}/cross-tools/bin \
>>                       --with-headers=${SYSDIR}/sysroot/usr/include \
>>                       --enable-stack-protector=strong --enable-add-ons \
>>                       --disable-werror libc_cv_slibdir=/usr/lib64 \
>>                       --enable-kernel=4.15
>>          make ${JOBS}
>>          make DESTDIR=${SYSDIR}/sysroot install
>>          cp -v ../nscd/nscd.conf ${SYSDIR}/sysroot/etc/nscd.conf
>>          mkdir -pv ${SYSDIR}/sysroot/var/cache/nscd
>>          install -v -Dm644 ../nscd/nscd.tmpfiles \
>>                            ${SYSDIR}/sysroot/usr/lib/tmpfiles.d/nscd.conf
>>          install -v -Dm644 ../nscd/nscd.service \
>>                            ${SYSDIR}/sysroot/usr/lib/systemd/system/nscd.service
>>      popd
>>      mkdir -v build-locale
>>      pushd build-locale
>>          ../configure --prefix=/usr --libdir=/usr/lib64 --libexecdir=/usr/lib64/glibc \
>>                       --enable-stack-protector=strong --enable-add-ons \
>>                       --disable-werror libc_cv_slibdir=/usr/lib64
>>          make ${JOBS}
>>          make DESTDIR=${SYSDIR}/sysroot localedata/install-locales
>>      popd
>> popd
>>
>> # Make and install the complete GCC files
>> tar xvf ${DOWNLOADDIR}/gcc-13.0.0.tar.gz -C ${BUILDDIR}
>> pushd ${BUILDDIR}/gcc-13.0.0
>>      mkdir tools-build-all
>>      pushd tools-build-all
>>          AR=ar LDFLAGS="-Wl,-rpath,${SYSDIR}/cross-tools/lib" \
>>          ../configure --prefix=${SYSDIR}/cross-tools --build=${CROSS_HOST} \
>>                       --host=${CROSS_HOST} --target=${CROSS_TARGET} \
>>                       --with-sysroot=${SYSDIR}/sysroot --with-mpfr=${SYSDIR}/cross-tools \
>>                       --with-gmp=${SYSDIR}/cross-tools --with-mpc=${SYSDIR}/cross-tools \
>>                       --enable-__cxa_atexit --enable-threads=posix --with-system-zlib \
>>                       --enable-libstdcxx-time --enable-checking=release \
>>                       --enable-default-pie \
>>                       --enable-languages=c,c++,fortran,objc,obj-c++,lto
>>          make ${JOBS}
>>          make install-strip
>>      popd
>> popd
>>
Thanks,

--

Min Zhou

>