* [PATCH v2 1/6] containers/docs: Add container builder start
2022-10-19 12:53 [PATCH v2 0/6] Community Lab Container Definitions ohilyard
@ 2022-10-19 12:53 ` ohilyard
2022-10-19 12:53 ` [PATCH v2 2/6] containers/inventory: Add inventory for container builder ohilyard
` (6 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: ohilyard @ 2022-10-19 12:53 UTC (permalink / raw)
To: ci; +Cc: aconole, alialnu, Owen Hilyard
From: Owen Hilyard <ohilyard@iol.unh.edu>
* Add README file for containers
* Add pyproject file with required dependencies for building containers
This module allows anyone to build the containers used in DPDK CI, and
allows the community to contribute container definitions back to DPDK
CI. Please read the README for more information, since some
functionality is opt-in due to resource requirements.
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
---
containers/README.md | 137 ++++++++++++++++++++++
containers/template_engine/pyproject.toml | 21 ++++
2 files changed, 158 insertions(+)
create mode 100644 containers/README.md
create mode 100644 containers/template_engine/pyproject.toml
diff --git a/containers/README.md b/containers/README.md
new file mode 100644
index 0000000..815fab3
--- /dev/null
+++ b/containers/README.md
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2022 University of New Hampshire
+
+DPDK CI Container Build System
+==============================
+
+## Rational
+
+There are a few important factors for why a custom build system was created for
+the containers instead of using an existing one. The first was that podman was
+nearly mandatory for this task.
+
+### Why Podman
+
+1. Licensed RHEL containers need podman
+
+The build system MUST be able to handle creating properly licensed RHEL
+containers, so that the RHEL CI testing is as accurate as possbile.
+
+2. "Developer Laptop Friendliness"
+
+Another goal of the build system was to enable anyone to easily build the
+containers. Not all developers are able to use Linux as the main OS on their
+main development machine. Podman runs on MacOS via podman-machine and Windows
+either by podman-machine or WSL.
+
+3. OCI Containers
+
+OCI containers are more portable than some other container solutions. Much of
+the progress on getting containers running on top of FreeBSD jails targets OCI
+containers specifically. The tracking issue for this is
+[https://reviews.freebsd.org/D21570](https://reviews.freebsd.org/D21570).
+Once upstream support happens, there should be a relatively simple path to
+supporting containers in FreeBSD once podman/docker APIs are better supported.
+At the moment, lack up upstream support means no support in this project for
+FreeBSD.
+
+### Python and Makefiles instead of Buildah as a library
+
+The next question someone might have is why a combination of Python and
+makefiles were used instead of using buildah as a library. The largest
+reason is that every DPDK developer is going to need to have some
+level of familarity with Python due to DTS. Buildah is only avaliable
+as a library via Go, and would tie DPDK to a particular container
+implementation. Go, while not difficult to learn, is a compiled language,
+meaning that the build system would require a build system.
+
+The other reason is that most of the logic that needs to be performed is very
+simple, and python has a few libraries that do most of the work. If it weren't
+for the desire to have an inventory file (inventory.yaml) with a schema
+(inventory_schema.json), this probably could have been an AWK script. After the
+container images are produced, it is very easy to use the same templating
+engine to produce a makefile that can be used to both build and push the
+containers. This makefile can be run with multiple jobs for parallel building
+of containers, something not supported by all compose implementations.
+
+Meson was considered instead of Makefiles, however, Meson does not handle new
+Meson being generated during the build very well, and Meson wants most commands
+to have an output file, which is not true of many of the commands. Meson is
+also more difficult to generate using a templating library than Makefile
+targets.
+
+## Building
+
+### Environment Variables
+
+All environment variables are namespaced to DPDK_CI_CONTAINERS to avoid any
+issues.
+
+| Variable | Description | Default | Valid Values |
+| -------------------------- | ----------------------------------------------- | ------- | ------------ |
+| DPDK_CI_CONTAINERS_ON_RHEL | Whether you are building on licensed RHEL. RHEL containers must be built on licensed RHEL, this can be used to forcibly enable/disable RHEL containers if automatic detection fails. | (grep -q 'Red Hat Enterprise Linux' /etc/redhat-release && echo 'Y') \|\| echo 'N' | 'Y' or 'N'
+DPDK_CI_CONTAINERS_FAIL_ON_UNBUILDABLE | Fail during dockerfile generation if any container in the inventory is not buildable. Currently will cause a failure if you are not on RHEL and try to build RHEL containers. | 'N' | 'Y' or 'N'
+DPDK_CI_CONTAINERS_BUILD_ABI | Whether to bake ABI images into the containers. | 'N' | 'Y' or 'N'
+DPDK_CI_CONTAINER_BUILDER_PROGRAM | What container builder program to use. | 'podman' | Any container builder that exposes the same interface and provides the same behavior as podman.
+DPDK_CI_CONTAINERS_LIBABIGAIL_CLONE_URL | What URL to clone libabigail from, since some distros need to compile it from source. | 'git://sourceware.org/git/libabigail.git' | A repository containing libabigail which shares history with the main repository.
+DPDK_CI_CONTAINERS_DPDK_CLONE_URL | What URL to clone DPDK from. | 'https://dpdk.org/git/dpdk' | Any DPDK mirror.
+DPDK_CI_CONTAINERS_CONTAINER_BUILDER_TAG | What tag to give to the container which creates the dockerfiles. The default should be fine unless you have issues with collisions. | 'dpdk_ci_container_builder' | Any valid OCI container tag (A valid C function name will work)
+DPDK_CI_CONTAINERS_EXTRA_PUSH_ARGS | Extra arguments to add to the push command, can be used for credentials if 'podman login' won't work. | '' | [https://docs.podman.io/en/latest/markdown/podman-push.1.html#options](https://docs.podman.io/en/latest/markdown/podman-push.1.html#options)
+DPDK_CI_CONTAINERS_REGISTRY_HOSTNAME | The hostname of the registry to push to. | 'localhost' | The hostname of any system exposing an OCI container registry or localhost to push to local storage.
+DPDK_CI_CONTAINERS_EXTRA_SCRIPTS_PATH | The path to a directory to copy into all of the containers at /scripts | unset | The path to any local file directory.
+DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY | Set the directory to build the containers in. All generated files will be placed in this directory or one of it's children | '$(CURDIR)/container_context' | Any absolute directory path
+
+### Builder System Requirements
+
+#### Required Programs
+
+* GNU make (POSIX make may work, but is not supported)
+* git
+* find
+* posix utilities (GNU coreutils will work)
+* bash
+* podman (docker or other container builder programs may work, but are
+unsupported)
+* qemu-$ARCH-static for any non-native architecture/revision you want to build
+for.
+
+#### Hardware
+
+| Hardware Type | Requirement | Reason |
+| ------------- | ---------------------------- | ----------------------------------- |
+| Disk space | 5 GB of disk space per image | Some images are 4 GB at the moment, and as DPDK's API grows, so will the ABI references.
+Memory | Either 1.5x or 2x the memory needed to compile DPDK per makefile job | 1.5x is enough for the container overhead and caching when compiling natively, 2x is for builds under emulation (ARM container on x86, etc).
+
+
+#### RHEL containers
+
+RHEL container images must be built on RHEL.
+
+### Build containers locally
+
+```bash
+make build
+```
+
+### Push containers to registry
+
+This will probably involve following prompts in your terminal, but if you have
+other authentication set up, (LDAP, Kerberos, etc), it may not prompt you.
+Logging into a registry is what allows you to upload containers to a remote
+system for others to pull down.
+
+If you are working alone, you probably can ignore this and keep the containers
+locally. If you are in an enterprise setting, ask your DevOps or Systems
+Administration team where the preferred location for hosting containers is.
+
+Since these images take so long to build, it is recommended to use a container
+registry and have any CI systems pull from that registry.
+
+Redhat guide to setting up a podman container registry:
+[https://www.redhat.com/sysadmin/simple-container-registry](https://www.redhat.com/sysadmin/simple-container-registry)
+
+```bash
+$DPDK_CI_CONTAINER_BUILDER_PROGRAM login $DPDK_CI_CONTAINERS_REGISTRY_HOSTNAME
+# < Complete login process >
+make push
+```
\ No newline at end of file
diff --git a/containers/template_engine/pyproject.toml b/containers/template_engine/pyproject.toml
new file mode 100644
index 0000000..f5611ce
--- /dev/null
+++ b/containers/template_engine/pyproject.toml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2022 University of New Hampshire
+
+[tool.poetry]
+name = "dpdk_ci_containers"
+version = "0.1.0"
+description = ""
+authors = ["Owen Hilyard <ohilyard@iol.unh.edu>"]
+license = "BSD-3-Clause"
+
+[tool.poetry.dependencies]
+python = "^3.8"
+Jinja2 = "^3.1.2"
+jsonschema = "^4.10.0"
+PyYAML = "^6.0"
+
+[tool.poetry.dev-dependencies]
+
+[build-system]
+requires = ["poetry-core>=1.0.0"]
+build-backend = "poetry.core.masonry.api"
--
2.34.1
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 2/6] containers/inventory: Add inventory for container builder
2022-10-19 12:53 [PATCH v2 0/6] Community Lab Container Definitions ohilyard
2022-10-19 12:53 ` [PATCH v2 1/6] containers/docs: Add container builder start ohilyard
@ 2022-10-19 12:53 ` ohilyard
2022-10-19 12:53 ` [PATCH v2 3/6] containers/builder: Dockerfile creation script ohilyard
` (5 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: ohilyard @ 2022-10-19 12:53 UTC (permalink / raw)
To: ci; +Cc: aconole, alialnu, Owen Hilyard
From: Owen Hilyard <ohilyard@iol.unh.edu>
Adds a yaml file used to define what containers should be built, what
packages the containers should have, what platforms to build for and how they
should be tagged.
Also adds a JSON schema, which can be used to validate that the
inventory file is well-formed.
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
---
containers/template_engine/inventory.yaml | 356 ++++++++++++++++++
.../template_engine/inventory_schema.json | 153 ++++++++
2 files changed, 509 insertions(+)
create mode 100644 containers/template_engine/inventory.yaml
create mode 100644 containers/template_engine/inventory_schema.json
diff --git a/containers/template_engine/inventory.yaml b/containers/template_engine/inventory.yaml
new file mode 100644
index 0000000..fc06641
--- /dev/null
+++ b/containers/template_engine/inventory.yaml
@@ -0,0 +1,356 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2022 University of New Hampshire
+---
+abi:
+ # versions should also include the abi versions for all stable ABIs.
+ versions:
+ - major: 20 # oldest supported lts
+ minor: 11
+ git_tag: v20.11
+ - major: 21 # most recent lts
+ minor: 11
+ git_tag: v21.11
+ # - major: 22 # current abi
+ # minor: 07
+ # git_tag: v22.07
+
+dockerfiles:
+ groups:
+ all:
+ package_manager_command: "NO_INSTALL_COMMAND_SET"
+ parent: "NONE"
+ packages:
+ - gcc
+ - make
+ - git
+ - sudo
+ - curl
+ - automake
+ - autoconf
+ - flex
+ - bison
+ - bc
+ rpm:
+ parent: "all"
+ package_manager_command: yum install -y
+ packages:
+ - diffutils
+ - pkg-config
+ - python3
+ - python3-pip
+ - librdmacm
+ - rdma-core-devel
+ - libmnl-devel
+ - ccache
+ - zip
+ - autoconf
+ redhat_family:
+ parent: "rpm"
+ packages: []
+ fedora:
+ parent: "redhat_family"
+ packages:
+ - python3-pyelftools
+ - zip
+ - clang
+ - ninja-build
+ - elfutils-libelf-devel
+ - jansson-devel
+ - libatomic
+ - libpcap-devel
+ - numactl-devel
+ - findutils
+ - libtool
+ - elfutils-devel
+ - libxml2-devel
+ - libabigail
+ centos8:
+ parent: "redhat_family"
+ packages:
+ - elfutils-libelf-devel
+ - jansson-devel
+ - libatomic
+ - libpcap-devel
+ - numactl-devel
+ - libabigail
+ centos9:
+ parent: "redhat_family"
+ package_manager_command: "yum install --allowerasing -y"
+ packages:
+ - elfutils-libelf-devel
+ - jansson-devel
+ - libatomic
+ - libpcap-devel
+ - numactl-devel
+ - libtool
+ - g++
+ - elfutils-devel
+ - libxml2-devel
+ rhel:
+ parent: "redhat_family"
+ package_manager_command: "yum --disableplugin=subscription-manager install -y"
+ packages:
+ - elfutils-libelf-devel
+ - jansson-devel
+ - libatomic
+ - libpcap-devel
+ - numactl-devel
+ rhel7:
+ parent: "rhel"
+ packages:
+ - libabigail
+ - ninja-build
+ rhel8:
+ parent: "rhel"
+ package_manager_command: "yum --allowerasing --disableplugin=subscription-manager install -y"
+ packages:
+ - libabigail
+ - ninja-build
+ - libxml2-devel
+ rhel9:
+ parent: "rhel"
+ package_manager_command: "yum --allowerasing --disableplugin=subscription-manager install -y"
+ packages:
+ - libxml2-devel
+ opensuse:
+ parent: "rpm"
+ package_manager_command: "zypper install -y"
+ packages:
+ - python3-pyelftools
+ - ninja
+ - gzip
+ - libelf-devel
+ - libjansson-devel
+ - librdmacm1
+ - libatomic1
+ - libnuma-devel
+ - libabigail-tools
+ - tar
+ alpine:
+ parent: 'all'
+ package_manager_command: 'apk add'
+ packages:
+ - python3
+ - py3-pip
+ - alpine-sdk
+ - ccache
+ - cmake
+ - bash
+ - autoconf
+ - automake
+ - libtool
+ - elfutils-dev
+ - libxml2-dev
+ - fts-dev
+ - fts
+ - numactl-dev
+ - libc-dev
+ - bsd-compat-headers
+ - libexecinfo-dev
+ - linux-headers
+ - libatomic
+ - zip
+ - pkgconfig
+ arch:
+ parent: 'all'
+ package_manager_command: 'pacman -Syu --noconfirm'
+ packages:
+ - glibc
+ - cmake
+ - ninja
+ - pandoc
+ - python
+ - python-docutils
+ - ethtool
+ - file
+ - fakeroot
+ - pkg-config
+ - numactl
+ - elfutils
+ - gawk
+ - diffutils
+ - python-pip
+ - libabigail
+ debian:
+ parent: 'all'
+ package_manager_command: 'apt-get update && apt-get install --no-install-recommends -y'
+ packages:
+ - libnuma-dev
+ - zip
+ - librdmacm1
+ - libcrypto++-dev
+ - python3-pyelftools
+ - libxml2-dev
+ - libelf-dev
+ - libpcap-dev
+ - libjansson-dev
+ - python3-setuptools
+ - autoconf
+ - pkg-config
+ - libtool
+ - ccache
+ - libatomic1
+ - python3-wheel
+ - libdw-dev
+ - rdma-core
+ - ninja-build
+ - automake
+ - librdmacm-dev
+ - libmnl-dev
+ - python3-pip
+ - build-essential
+ - aspell-en
+ - parallel
+ - python3-grpcio
+ - lcov
+ debian10:
+ parent: 'debian'
+ packages: []
+ debian11:
+ parent: 'debian'
+ packages: []
+ ubuntu:
+ parent: 'debian'
+ packages: []
+ ubuntu18.04:
+ parent: 'ubuntu'
+ packages: []
+ ubuntu20.04:
+ parent: 'ubuntu'
+ packages:
+ - python3-grpcio
+ - lcov
+ - jq
+ - default-jre
+ - nodejs
+ ubuntu22.04:
+ parent: 'ubuntu'
+ packages:
+ - python3-grpcio
+ - lcov
+ - abigail-tools
+ - jq
+ ubuntu_cross: # x86 -> ARM
+ parent: 'ubuntu20.04'
+ packages:
+ - clang
+ - llvm
+ - llvm-dev
+ - llvm-runtime
+ - lld
+ - gcc-aarch64-linux-gnu
+ - libgcc-9-dev-arm64-cross
+ - libatomic1-arm64-cross
+ - libc6-dev-arm64-cross
+ - pkg-config-aarch64-linux-gnu
+ - dpkg-dev
+ - gcc-arm-linux-gnueabihf
+ - libc6-dev-armhf-cross
+ - pkg-config-arm-linux-gnueabihf
+ ubuntu_sve:
+ parent: 'ubuntu20.04'
+ packages:
+ - gcc-10
+ targets:
+
+# Alpine
+ - name: alpine_compile
+ group: 'alpine'
+ base_image: alpine
+ platforms: [linux/amd64]
+ extra_information:
+ environment_id: 45
+
+# Arch
+ - name: arch_compile
+ group: 'arch'
+ base_image: archlinux:base
+ platforms: [linux/amd64]
+
+# Fedora
+ - name: fedora35_compile
+ group: "fedora"
+ base_image: fedora:35
+ platforms: [linux/amd64]
+ - name: fedora36_compile
+ group: "fedora"
+ base_image: fedora:36
+ platforms: [linux/amd64]
+ - name: fedora36_clang
+ group: "fedora"
+ base_image: fedora:36
+ platforms: [linux/amd64]
+
+# CentOs
+ - name: centosstream8_compile
+ group: "centos8"
+ base_image: quay.io/centos/centos:stream8
+ platforms: [linux/amd64]
+
+ - name: centosstream9_compile
+ group: "centos9"
+ base_image: quay.io/centos/centos:stream9
+ platforms: [linux/amd64]
+
+# RHEL
+ - name: rhel7_compile
+ group: "rhel7"
+ base_image: registry.access.redhat.com/ubi7/ubi
+ platforms: [linux/amd64]
+
+ - name: rhel8_compile
+ group: "rhel8"
+ base_image: registry.access.redhat.com/ubi8/ubi
+ platforms: [linux/amd64]
+
+ - name: rhel9_compile
+ group: "rhel9"
+ base_image: registry.access.redhat.com/ubi9/ubi
+ platforms: [linux/amd64]
+
+# OpenSuse
+ - name: opensuse-leap15_compile
+ group: "opensuse"
+ base_image: opensuse/leap:15
+ platforms: [linux/amd64]
+
+# Debian
+ - name: debian10_compile # debian 10
+ group: 'debian10'
+ base_image: 'debian:buster'
+ platforms: [linux/amd64]
+
+ - name: debian11_compile # debian 11
+ group: 'debian11'
+ base_image: 'debian:bullseye'
+ platforms: [linux/amd64]
+
+# Ubuntu
+ - name: ubuntu20.04_compile
+ group: 'ubuntu20.04'
+ base_image: 'ubuntu:20.04'
+ platforms: [linux/amd64]
+ extra_tags:
+ - $R/ubuntu20.04_libabigail:latest
+ - $R/ubuntu20.04_libabigail:$T
+ - $R/ubuntu20.04_spell-check:latest
+ - $R/ubuntu20.04_spell-check:$T
+ - $R/ubuntu20.04_sonarscanner:latest
+ - $R/ubuntu20.04_sonarscanner:$T
+
+ # x86 -> ARM cross compile
+ - name: ubuntu20.04_cross
+ group: 'ubuntu_cross'
+ base_image: 'ubuntu:20.04'
+ platforms: [linux/amd64]
+ cross_file: "config/arm/arm64_armv8_linux_gcc"
+
+ - name: ubuntu20.04_sve_compile
+ group: 'ubuntu_sve'
+ base_image: 'arm64v8/ubuntu:20.04'
+ platforms: [linux/arm64]
+
+ - name: ubuntu22.04_compile
+ group: 'ubuntu22.04'
+ base_image: 'ubuntu:22.04'
+ platforms: [linux/amd64]
\ No newline at end of file
diff --git a/containers/template_engine/inventory_schema.json b/containers/template_engine/inventory_schema.json
new file mode 100644
index 0000000..0e641b7
--- /dev/null
+++ b/containers/template_engine/inventory_schema.json
@@ -0,0 +1,153 @@
+{
+ "$schema": "https://json-schema.org/draft-07/schema",
+ "title": "dpdklab-ci container inventory schema",
+ "$comment": "SPDX-License-Identifier: BSD-3-Clause\nCopyright (c) 2022 University of New Hampshire",
+ "definitions": {},
+ "type": "object",
+ "properties": {
+ "abi": {
+ "type": "object",
+ "properties": {
+ "versions": {
+ "type": "array",
+ "items": {
+ "type": "object",
+ "properties": {
+ "major": {
+ "type": "integer",
+ "description": "The major version number (usually the year of release)"
+ },
+ "minor": {
+ "type": "integer",
+ "description": "The minor version number (usually the month of release)"
+ },
+ "git_tag": {
+ "type": "string",
+ "description": "The git tag to check out to get this ABI version"
+ }
+ },
+ "required": [
+ "major",
+ "minor",
+ "git_tag"
+ ],
+ "additionalProperties": false
+ },
+ "minItems": 0
+ }
+ },
+ "required": [
+ "versions"
+ ],
+ "additionalProperties": false
+ },
+ "dockerfiles": {
+ "type": "object",
+ "properties": {
+ "groups": {
+ "type": "object",
+ "patternProperties": {
+ "^[a-z][a-z_0-9\\.]+$": {
+ "type": "object",
+ "properties": {
+ "package_manager_command": {
+ "type": "string",
+ "description": "The command to install packages without user input."
+ },
+ "parent": {
+ "type": "string",
+ "description": "Which group to inherit from, or NONE if no parent exists"
+ },
+ "packages": {
+ "type": "array",
+ "description": "A list of package names to install",
+ "items": {
+ "type": "string"
+ },
+ "uniqueItems": true
+ }
+ },
+ "required": [
+ "parent",
+ "packages"
+ ],
+ "additionalProperties": false
+ }
+ },
+ "minProperties": 1
+ },
+ "targets": {
+ "type": "array",
+ "items": {
+ "type": "object",
+ "properties": {
+ "name": {
+ "type": "string",
+ "description": "The name of the docker container"
+ },
+ "group": {
+ "type": "string",
+ "description": "Which group the target is a member of"
+ },
+ "base_image": {
+ "type": "string",
+ "description": "The base docker image."
+ },
+ "platforms": {
+ "type": "array",
+ "description": "What platforms to build for",
+ "items": {
+ "type": "string",
+ "enum": [
+ "linux/amd64",
+ "linux/arm64",
+ "linux/riscv64",
+ "linux/ppc64le",
+ "linux/arm/v7",
+ "linux/arm/v6"
+ ]
+ },
+ "minItems": 1
+ },
+ "cross_file": {
+ "type": "string",
+ "description": "A cross file to compile meson with. If not present, meson's automatic behavior will be used."
+ },
+ "extra_tags": {
+ "type": "array",
+ "description": "Tags to apply to this image",
+ "items": {
+ "type": "string",
+ "description": "$R will be replaced with the 'registry_hostname' variable in this file. $T will be replaced with a timestamp in the form of '%Y-%m-%d'. $N will be replaced by the name of the target.. The tags '$R/$N:latest' and '$R/$N:$T' will always be present"
+ }
+ },
+ "extra_information": {
+ "type": "object",
+ "description": "Extra information to be stored as a JSON file at /container_info.json",
+ "additionalProperties": true
+ }
+ },
+ "required": [
+ "name",
+ "group",
+ "base_image",
+ "platforms"
+ ],
+ "additionalProperties": false
+ },
+ "minItems": 1
+ }
+ },
+ "required": [
+ "groups",
+ "targets"
+ ],
+ "additionalProperties": false
+ }
+ },
+ "required": [
+ "abi",
+ "dockerfiles"
+ ],
+ "additionalProperties": false
+}
\ No newline at end of file
--
2.34.1
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 3/6] containers/builder: Dockerfile creation script
2022-10-19 12:53 [PATCH v2 0/6] Community Lab Container Definitions ohilyard
2022-10-19 12:53 ` [PATCH v2 1/6] containers/docs: Add container builder start ohilyard
2022-10-19 12:53 ` [PATCH v2 2/6] containers/inventory: Add inventory for container builder ohilyard
@ 2022-10-19 12:53 ` ohilyard
2022-10-19 12:53 ` [PATCH v2 4/6] containers/templates: Templates for Dockerfiles ohilyard
` (4 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: ohilyard @ 2022-10-19 12:53 UTC (permalink / raw)
To: ci; +Cc: aconole, alialnu, Owen Hilyard
From: Owen Hilyard <ohilyard@iol.unh.edu>
This script will template out all of the Dockerfiles based on the
definitions provided in the inventory using the jinja2 templating
library.
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
---
containers/template_engine/make_dockerfile.py | 221 ++++++++++++++++++
1 file changed, 221 insertions(+)
create mode 100755 containers/template_engine/make_dockerfile.py
diff --git a/containers/template_engine/make_dockerfile.py b/containers/template_engine/make_dockerfile.py
new file mode 100755
index 0000000..ddef84c
--- /dev/null
+++ b/containers/template_engine/make_dockerfile.py
@@ -0,0 +1,221 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2022 University of New Hampshire
+from datetime import datetime
+from jinja2 import Environment, FileSystemLoader, select_autoescape
+import logging
+import os
+import argparse
+from dataclasses import dataclass
+import json
+from typing import Any, Dict, List, Optional
+import yaml
+import jsonschema
+
+
+@dataclass(frozen=True)
+class Options:
+ on_rhel: bool
+ fail_on_unbuildable: bool
+ build_abi: bool
+ output_dir: str
+ registry_hostname: str
+
+
+def _get_arg_parser() -> argparse.ArgumentParser:
+ parser = argparse.ArgumentParser(description="Makes the dockerfile")
+ parser.add_argument("--output-dir", required=True)
+ parser.add_argument(
+ "--rhel",
+ action="store_true",
+ help="Overwrite the check for running on RHEL",
+ default=False,
+ )
+ parser.add_argument(
+ "--fail-on-unbuildable",
+ action="store_true",
+ help="If any container would not be possible to build, fail and exit with a non-zero exit code.",
+ default=False,
+ )
+ parser.add_argument(
+ "--build-abi",
+ action="store_true",
+ help="Whether to build the ABI references into the image. Disabled by default due to producing 10+ GB images. ",
+ )
+ return parser
+
+
+def parse_args() -> Options:
+ parser = _get_arg_parser()
+ args = parser.parse_args()
+
+ registry_hostname = (
+ os.environ.get("DPDK_CI_CONTAINERS_REGISTRY_HOSTNAME") or "localhost"
+ )
+
+ return Options(
+ on_rhel=args.rhel,
+ fail_on_unbuildable=args.fail_on_unbuildable,
+ build_abi=args.build_abi,
+ output_dir=args.output_dir,
+ registry_hostname=registry_hostname,
+ )
+
+
+def running_on_RHEL(options: Options) -> bool:
+ """
+ RHEL containers can only be built on RHEL, so disable them and emit a
+ warning if not on RHEL.
+ """
+ redhat_release_path = "/etc/redhat-release"
+
+ if os.path.exists(redhat_release_path):
+ with open(redhat_release_path) as f:
+ first_line = f.readline()
+ on_rhel = "Red Hat Enterprise Linux" in first_line
+ if on_rhel:
+ logging.info("Running on RHEL, allowing RHEL containers")
+ return True
+
+ logging.warning("Not on RHEL, disabling RHEL containers")
+ assert options is not None, "Internal state error, OPTIONS should not be None"
+
+ if options.on_rhel:
+ logging.info("Override enabled, enabling RHEL containers")
+
+ return options.on_rhel
+
+
+def get_path_to_parent_directory() -> str:
+ return os.path.dirname(__file__)
+
+
+def get_raw_inventory():
+ parent_dir = get_path_to_parent_directory()
+
+ schema_path = os.path.join(parent_dir, "inventory_schema.json")
+ inventory_path = os.path.join(parent_dir, "inventory.yaml")
+
+ inventory: Dict[str, Any]
+ with open(inventory_path, "r") as f:
+ inventory = yaml.safe_load(f)
+
+ schema: Dict[str, Any]
+ with open(schema_path, "r") as f:
+ schema = json.load(f)
+
+ jsonschema.validate(instance=inventory, schema=schema)
+ return inventory
+
+
+def apply_group_config_to_target(
+ target: Dict[str, Any],
+ raw_inventory: Dict[str, Any],
+ on_rhel: bool,
+ fail_on_unbuildable: bool,
+) -> Optional[Dict[str, Any]]:
+ groups_for_target: List[Dict[str, Any]] = []
+ groups: List[Dict[str, Any]] = raw_inventory["dockerfiles"]["groups"]
+ group = groups[target["group"]]
+
+ target_primary_group = target["group"]
+
+ assert isinstance(target_primary_group, str), "Target group name was not a string"
+
+ requires_rhel = "rhel" in target_primary_group.lower()
+
+ if requires_rhel and not on_rhel:
+ logging.warning(
+ f"Disabling target {target['name']}, because it must be built on RHEL."
+ )
+ if fail_on_unbuildable:
+ raise AssertionError(
+ f"Not on RHEL and target {target['name']} must be built on RHEL"
+ )
+
+ return None
+
+ while group["parent"] != "NONE":
+ groups_for_target.append(group)
+ group = groups[group["parent"]]
+
+ groups_for_target.append(group) # add the "all" group
+ groups_for_target.reverse() # reverse it so overrides work
+
+ target_packages: List[str] = target.get("packages") or []
+
+ for group in groups_for_target:
+ target_packages = [*target_packages, *(group.get("packages") or [])]
+ target = dict(target, **group)
+
+ target["packages"] = target_packages
+
+ return target
+
+
+def get_processed_inventory(options: Options) -> Dict[str, Any]:
+ raw_inventory: Dict[str, Any] = get_raw_inventory()
+ on_rhel = running_on_RHEL(options)
+ targets = raw_inventory["dockerfiles"]["targets"]
+ targets = [
+ apply_group_config_to_target(
+ target, raw_inventory, on_rhel, options.fail_on_unbuildable
+ )
+ for target in targets
+ ]
+ # remove disabled options
+ targets = [target for target in targets if target is not None]
+ raw_inventory["dockerfiles"]["targets"] = targets
+
+ return raw_inventory
+
+
+def main():
+ options: Options = parse_args()
+
+ env = Environment(
+ loader=FileSystemLoader("templates"),
+ )
+
+ inventory = get_processed_inventory(options)
+
+ timestamp = datetime.now().strftime("%Y-%m-%d")
+
+ for target in inventory["dockerfiles"]["targets"]:
+ template = env.get_template(f"containers/{target['group']}.dockerfile.j2")
+ dockerfile_location = os.path.join(
+ options.output_dir, target["name"] + ".dockerfile"
+ )
+
+ tags: list[str] = target.get("extra_tags") or []
+ tags.insert(0, "$R/$N:latest")
+ tags.insert(1, "$R/$N:$T")
+
+ target["tags"] = tags
+
+ rendered_dockerfile = template.render(
+ timestamp=timestamp,
+ target=target,
+ build_abi=options.build_abi,
+ registry_hostname=options.registry_hostname,
+ **inventory,
+ )
+ with open(dockerfile_location, "w") as output_file:
+ output_file.write(rendered_dockerfile)
+
+ makefile_template = env.get_template(f"containers.makefile.j2")
+ rendered_makefile = makefile_template.render(
+ timestamp=timestamp,
+ build_abi=options.build_abi,
+ registry_hostname=options.registry_hostname,
+ **inventory,
+ )
+ makefile_output_path = os.path.join(options.output_dir, "Makefile")
+ with open(makefile_output_path, "w") as f:
+ f.write(rendered_makefile)
+
+
+if __name__ == "__main__":
+ logging.basicConfig()
+ logging.root.setLevel(0) # log everything
+ main()
--
2.34.1
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 4/6] containers/templates: Templates for Dockerfiles
2022-10-19 12:53 [PATCH v2 0/6] Community Lab Container Definitions ohilyard
` (2 preceding siblings ...)
2022-10-19 12:53 ` [PATCH v2 3/6] containers/builder: Dockerfile creation script ohilyard
@ 2022-10-19 12:53 ` ohilyard
2022-10-19 19:24 ` Ali Alnubani
2022-10-19 12:53 ` [PATCH v2 5/6] containers/container_builder: Container for python scripts ohilyard
` (3 subsequent siblings)
7 siblings, 1 reply; 12+ messages in thread
From: ohilyard @ 2022-10-19 12:53 UTC (permalink / raw)
To: ci; +Cc: aconole, alialnu, Owen Hilyard
From: Owen Hilyard <ohilyard@iol.unh.edu>
Adds a variety of extensible templates used to create the Dockerfiles
for each target. All templates inherit from base, and most distros and
distro families have their own templates that are used to define common
functionality. Multiple versions of a distro may use a single template
if they are similar enough (ex: fedora).
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
---
.../templates/containers.makefile.j2 | 31 +++++++
.../templates/containers/alpine.dockerfile.j2 | 33 ++++++++
.../templates/containers/arch.dockerfile.j2 | 37 +++++++++
.../templates/containers/base.dockerfile.j2 | 81 +++++++++++++++++++
.../containers/centos8.dockerfile.j2 | 21 +++++
.../containers/centos9.dockerfile.j2 | 17 ++++
.../templates/containers/debian.dockerfile.j2 | 7 ++
.../containers/debian10.dockerfile.j2 | 3 +
.../containers/debian11.dockerfile.j2 | 3 +
.../containers/debian_bullseye.dockerfile.j2 | 3 +
.../containers/debian_buster.dockerfile.j2 | 3 +
.../templates/containers/fedora.dockerfile.j2 | 11 +++
.../containers/fedora36_clang.dockerfile.j2 | 7 ++
.../containers/opensuse.dockerfile.j2 | 10 +++
.../containers/redhat_family.dockerfile.j2 | 5 ++
.../templates/containers/rhel.dockerfile.j2 | 12 +++
.../templates/containers/rhel7.dockerfile.j2 | 19 +++++
.../templates/containers/rhel8.dockerfile.j2 | 19 +++++
.../templates/containers/rhel9.dockerfile.j2 | 25 ++++++
.../templates/containers/rpm.dockerfile.j2 | 3 +
.../templates/containers/ubuntu.dockerfile.j2 | 3 +
.../containers/ubuntu20.04.dockerfile.j2 | 12 +++
.../containers/ubuntu22.04.dockerfile.j2 | 7 ++
.../containers/ubuntu_cross.dockerfile.j2 | 11 +++
.../containers/ubuntu_sve.dockerfile.j2 | 10 +++
25 files changed, 393 insertions(+)
create mode 100644 containers/template_engine/templates/containers.makefile.j2
create mode 100644 containers/template_engine/templates/containers/alpine.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/arch.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/base.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/centos8.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/centos9.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/debian.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/debian10.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/debian11.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/debian_bullseye.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/debian_buster.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/fedora.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/fedora36_clang.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/opensuse.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/redhat_family.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/rhel.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/rhel7.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/rhel8.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/rhel9.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/rpm.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/ubuntu.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/ubuntu20.04.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/ubuntu22.04.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/ubuntu_cross.dockerfile.j2
create mode 100644 containers/template_engine/templates/containers/ubuntu_sve.dockerfile.j2
diff --git a/containers/template_engine/templates/containers.makefile.j2 b/containers/template_engine/templates/containers.makefile.j2
new file mode 100644
index 0000000..f4bbb1b
--- /dev/null
+++ b/containers/template_engine/templates/containers.makefile.j2
@@ -0,0 +1,31 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+#################### START VARS #################
+DPDK_CI_CONTAINER_BUILDER_PROGRAM?=podman
+DPDK_CI_CONTAINERS_EXTRA_PUSH_ARGS?=
+DPDK_CI_CONTAINERS_REGISTRY_HOSTNAME?={{ registry_hostname }}
+
+#################### END VARS #################
+
+.PHONY: build_all
+build_all:{% for container in dockerfiles.targets %} build_{{ container.name }}{% endfor %}
+
+.PHONY: push_all
+push_all:{% for container in dockerfiles.targets %} push_{{ container.name }}{% endfor %}
+
+{% for container in dockerfiles.targets %}
+#################### START {{ container.name }} #####################
+ {% set container_id = container.name %}
+.PHONY: build_{{ container_id }}
+build_{{ container_id }}:
+ {% set base_tag = "%s/%s\:latest" | format(registry_hostname, container_id) -%}
+ $(DPDK_CI_CONTAINER_BUILDER_PROGRAM) build --target {{container.name}} --platform {{ container.platforms | join(',') }} {% for tag in container.tags -%}-t {{ tag | replace('$R', registry_hostname) | replace('$T', timestamp) | replace('$N', container.name) | replace(':', '\\:') }} {% endfor %} -f {{ container_id }}.dockerfile $(CURDIR)
+
+.PHONY: push_{{ container_id }}
+push_{{ container_id }}: build_{{ container_id }}
+ {%- set base_tag = "%s/%s\:latest" | format(registry_hostname, container_id) -%}
+ {%- for tag in container.tags %}
+ $(DPDK_CI_CONTAINER_BUILDER_PROGRAM) push $(DPDK_CI_CONTAINERS_EXTRA_PUSH_ARGS) {{ base_tag }} docker\://{{ tag | replace('$R', registry_hostname) | replace('$T', timestamp) | replace('$N', container.name) | replace(':', '\\:') }}
+ {%- endfor %}
+#################### END {{ container.name }} #####################
+{% endfor %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/alpine.dockerfile.j2 b/containers/template_engine/templates/containers/alpine.dockerfile.j2
new file mode 100644
index 0000000..080f077
--- /dev/null
+++ b/containers/template_engine/templates/containers/alpine.dockerfile.j2
@@ -0,0 +1,33 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/base.dockerfile.j2' %}
+
+{% block pip_installs %}
+RUN python3 -m pip install ninja pyelftools
+{% endblock %}
+
+{% block install_libabigail %}
+COPY libabigail ./libabigail
+# libabigail2.0 does not build on alpine, this commit does with the modification done in the next step.
+RUN --mount=type=cache,target=/ccache cd libabigail && git checkout df28c220976f41620b0bd7b22000815e11f66b75 && sed -i 's/fts-standalone/libfts/g' ./configure.ac && mkdir build && autoreconf -i && cd build && ../configure --prefix=/usr/local && (make all install -j $(nproc) || echo 'failure expected') && (make install || echo 'failure expected') && cd .. && rm -rf libabigail
+{% endblock install_libabigail %}
+
+{% block build_abi %}
+{% for abi_version in abi.versions %}
+ {% if abi_version.major >= 22 %}
+{% set abi_version_str = abi_version.git_tag %}
+RUN echo '{{ abi_version_str }}' >> abi_versions
+RUN mkdir {{ abi_version_str }}
+# compile DPDK
+RUN --mount=type=cache,target=/ccache \
+ mkdir -p /dpdk/build && rm -rf /dpdk/build && cd /dpdk && git fetch --tags && git checkout tags/{{ abi_version_str }} && cd /references && \
+ meson /dpdk /dpdk/build {% if "cross_file" in target -%}
+ --cross-file=/dpdk/{{ target.cross_file }}
+ {%- endif %} -Dexamples=all --buildtype=debugoptimized && DESTDIR={{ abi_folder }} ninja -C /dpdk/build install && \
+ bash /dpdk/devtools/gen-abi.sh {{ abi_folder }} && mv {{ abi_folder }}/usr/local/include {{ abi_folder }} && \
+ rm -rf {{ abi_folder }}/usr && rm -rf /dpdk/build
+ {% endif %}
+{% endfor %}
+RUN chmod -R 777 .
+RUN rm -rf /dpdk
+{% endblock build_abi %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/arch.dockerfile.j2 b/containers/template_engine/templates/containers/arch.dockerfile.j2
new file mode 100644
index 0000000..901607f
--- /dev/null
+++ b/containers/template_engine/templates/containers/arch.dockerfile.j2
@@ -0,0 +1,37 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/base.dockerfile.j2' %}
+
+{% block pre_package_manager %}
+RUN pacman-key --init
+RUN pacman -Sy --noconfirm archlinux-keyring && pacman -Su --noconfirm
+{% endblock %}
+
+
+{% block pip_installs %}
+RUN python3 -m pip install ninja pyelftools
+{% endblock %}
+
+{% block before_meson_after_pip %}
+# add user for building aur packages
+RUN useradd builder && \
+ mkdir /home/builder && \
+ chown builder:builder /home/builder
+
+# switch user to make packages from aur
+USER builder
+
+# clone and make rdma-core packages
+RUN cd /home/builder && git clone https://aur.archlinux.org/rdma-core.git
+RUN cd /home/builder/rdma-core && makepkg
+
+USER root
+
+RUN cd /home/builder/rdma-core && pacman --noconfirm -U rdma-core-*.pkg.tar.*
+
+RUN rm -rf /home/builder
+{% endblock %}
+
+{% block install_libabigail %}
+{# Installed via package manager #}
+{% endblock install_libabigail %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/base.dockerfile.j2 b/containers/template_engine/templates/containers/base.dockerfile.j2
new file mode 100644
index 0000000..c6194e9
--- /dev/null
+++ b/containers/template_engine/templates/containers/base.dockerfile.j2
@@ -0,0 +1,81 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+# ------------------------ Begin {{ target.name }} ------------------------------------------------
+
+FROM {{ target.base_image }} as {{ target.name }}
+
+ENV CCACHE_DIR=/ccache
+RUN mkdir /ccache
+{% block extra_env_vars -%}{%- endblock extra_env_vars %}
+
+{% block pre_package_manager -%}{%- endblock pre_package_manager %}
+
+# Install packages
+RUN {{ target.package_manager_command }} {{ target.packages | join(" ") }}
+
+# Installs from pip
+{% block pip_installs -%}{%- endblock pip_installs %}
+
+# Extra setup after python libs are installed
+{% block before_meson_after_pip -%}{%- endblock %}
+
+# install libabigail
+{% block install_libabigail %}
+COPY libabigail libabigail
+RUN --mount=type=cache,target=/ccache cd libabigail && mkdir build && autoreconf -i && cd build && ../configure --prefix=/usr/local && make all install && \
+ ldconfig && cd .. && rm -rf libabigail
+{% endblock install_libabigail %}
+
+# cross compilation setup
+{% block cross_compilation_setup %}
+{% endblock cross_compilation_setup %}
+
+# Copy externally pulled DPDK into the container
+RUN mkdir /dpdk
+
+COPY dpdk /dpdk
+
+# Install meson
+{% block install_meson %}
+# Install meson from dpdk main
+# Writes to the mount are discarded once the container is built and is not shared with other containers or the host
+RUN --mount=type=cache,target=/ccache cd /dpdk && chown -R root /dpdk && git checkout main && sh .ci/linux-setup.sh
+{% endblock install_meson %}
+
+ENV RTE_KERNELDIR CHANGE_ME
+
+RUN mkdir /references
+WORKDIR /references
+RUN touch abi_versions
+# build the abi
+{% if build_abi %}
+ {% block build_abi %}
+ {% for abi_version in abi.versions %}
+ {%- set abi_version_str = abi_version.git_tag -%}
+ {%- set abi_folder = "/references/" + abi_version_str + "_reference" %}
+RUN echo '{{ abi_version_str }}' >> abi_versions
+RUN mkdir -p {{ abi_folder }}
+# compile DPDK
+RUN --mount=type=cache,target=/ccache \
+ mkdir -p /dpdk/build && rm -rf /dpdk/build && cd /dpdk && git clean -xfd && git fetch --tags && git checkout tags/{{ abi_version_str }} && cd /references && \
+ meson /dpdk /dpdk/build {% if "cross_file" in target -%}
+ --cross-file=/dpdk/{{ target.cross_file }}
+ {%- endif %} -Dexamples=all --buildtype=debugoptimized && DESTDIR={{ abi_folder }} ninja -C /dpdk/build install && \
+ bash /dpdk/devtools/gen-abi.sh {{ abi_folder }} && mv {{ abi_folder }}/usr/local/include {{ abi_folder }} && \
+ rm -rf {{ abi_folder }}/usr && rm -rf /dpdk/build
+ {% endfor %}
+RUN rm -rf /dpdk
+RUN chmod -R 777 .
+ {% endblock build_abi %}
+{% else %}
+{% endif %}
+
+# Embed extra target information into the container
+{% if 'extra_information' in target %}
+RUN echo '{{ target.extra_information | tojson }}' > /container_info.json
+{% endif %}
+
+COPY ./scripts /scripts
+WORKDIR /
+# ------------------------ End {{ target.name }} ------------------------------------------------
+
diff --git a/containers/template_engine/templates/containers/centos8.dockerfile.j2 b/containers/template_engine/templates/containers/centos8.dockerfile.j2
new file mode 100644
index 0000000..bda024a
--- /dev/null
+++ b/containers/template_engine/templates/containers/centos8.dockerfile.j2
@@ -0,0 +1,21 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/redhat_family.dockerfile.j2' %}
+
+{% block pre_package_manager %}
+# For ninja-build, meson, libmnl-devel, nasm, and CUnit-devel
+RUN dnf install -y dnf-command\(config-manager\) dnf-plugins-core
+# Install EPEL repository for ccache
+RUN dnf install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
+# Enable powertools repository for libpcap-devel
+RUN dnf config-manager --set-enabled powertools
+{% endblock %}
+
+{% block pip_installs %}
+RUN python3 -m pip install --upgrade pip
+RUN python3 -m pip install pyelftools ninja
+{% endblock %}
+
+{% block install_libabigail %}
+{# Install via package manager #}
+{% endblock install_libabigail %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/centos9.dockerfile.j2 b/containers/template_engine/templates/containers/centos9.dockerfile.j2
new file mode 100644
index 0000000..8cacb99
--- /dev/null
+++ b/containers/template_engine/templates/containers/centos9.dockerfile.j2
@@ -0,0 +1,17 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/redhat_family.dockerfile.j2' %}
+
+{% block pre_package_manager %}
+# For ninja-build, meson, libmnl-devel, nasm, and CUnit-devel
+RUN dnf install -y dnf-command\(config-manager\) dnf-plugins-core
+# Install EPEL repository for ccache
+RUN dnf install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-9.noarch.rpm
+# Enable powertools repository for libpcap-devel
+RUN dnf config-manager --set-enabled crb
+{% endblock %}
+
+{% block pip_installs %}
+RUN python3 -m pip install --upgrade pip
+RUN python3 -m pip install pyelftools ninja
+{% endblock %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/debian.dockerfile.j2 b/containers/template_engine/templates/containers/debian.dockerfile.j2
new file mode 100644
index 0000000..74b56b6
--- /dev/null
+++ b/containers/template_engine/templates/containers/debian.dockerfile.j2
@@ -0,0 +1,7 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/base.dockerfile.j2' %}
+
+{% block pre_package_manager %}
+ENV DEBIAN_FRONTEND=noninteractive
+{% endblock %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/debian10.dockerfile.j2 b/containers/template_engine/templates/containers/debian10.dockerfile.j2
new file mode 100644
index 0000000..c52f866
--- /dev/null
+++ b/containers/template_engine/templates/containers/debian10.dockerfile.j2
@@ -0,0 +1,3 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/debian.dockerfile.j2' %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/debian11.dockerfile.j2 b/containers/template_engine/templates/containers/debian11.dockerfile.j2
new file mode 100644
index 0000000..0fd8a68
--- /dev/null
+++ b/containers/template_engine/templates/containers/debian11.dockerfile.j2
@@ -0,0 +1,3 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/debian.dockerfile.j2' %}
diff --git a/containers/template_engine/templates/containers/debian_bullseye.dockerfile.j2 b/containers/template_engine/templates/containers/debian_bullseye.dockerfile.j2
new file mode 100644
index 0000000..0fd8a68
--- /dev/null
+++ b/containers/template_engine/templates/containers/debian_bullseye.dockerfile.j2
@@ -0,0 +1,3 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/debian.dockerfile.j2' %}
diff --git a/containers/template_engine/templates/containers/debian_buster.dockerfile.j2 b/containers/template_engine/templates/containers/debian_buster.dockerfile.j2
new file mode 100644
index 0000000..c52f866
--- /dev/null
+++ b/containers/template_engine/templates/containers/debian_buster.dockerfile.j2
@@ -0,0 +1,3 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/debian.dockerfile.j2' %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/fedora.dockerfile.j2 b/containers/template_engine/templates/containers/fedora.dockerfile.j2
new file mode 100644
index 0000000..97e438e
--- /dev/null
+++ b/containers/template_engine/templates/containers/fedora.dockerfile.j2
@@ -0,0 +1,11 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/redhat_family.dockerfile.j2' %}
+
+{%- block pip_installs -%}
+RUN python3 -m pip install ninja
+{%- endblock -%}
+
+{% block install_libabigail %}
+# installed by package manager
+{% endblock install_libabigail %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/fedora36_clang.dockerfile.j2 b/containers/template_engine/templates/containers/fedora36_clang.dockerfile.j2
new file mode 100644
index 0000000..bc104ba
--- /dev/null
+++ b/containers/template_engine/templates/containers/fedora36_clang.dockerfile.j2
@@ -0,0 +1,7 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/fedora.dockerfile.j2' %}
+
+{% block extra_env_vars -%}
+ENV CC=clang
+{%- endblock extra_env_vars %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/opensuse.dockerfile.j2 b/containers/template_engine/templates/containers/opensuse.dockerfile.j2
new file mode 100644
index 0000000..48d2502
--- /dev/null
+++ b/containers/template_engine/templates/containers/opensuse.dockerfile.j2
@@ -0,0 +1,10 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/rpm.dockerfile.j2' %}
+
+{% block pip_installs %}
+{% endblock %}
+
+{% block install_libabigail %}
+{# Install via package manager #}
+{% endblock install_libabigail %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/redhat_family.dockerfile.j2 b/containers/template_engine/templates/containers/redhat_family.dockerfile.j2
new file mode 100644
index 0000000..9ae6577
--- /dev/null
+++ b/containers/template_engine/templates/containers/redhat_family.dockerfile.j2
@@ -0,0 +1,5 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/rpm.dockerfile.j2' %}
+
+{# All of the distros in the Redhat Linux Lineage, ex: RHEL, Fedora, CentOS #}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/rhel.dockerfile.j2 b/containers/template_engine/templates/containers/rhel.dockerfile.j2
new file mode 100644
index 0000000..a350e84
--- /dev/null
+++ b/containers/template_engine/templates/containers/rhel.dockerfile.j2
@@ -0,0 +1,12 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/redhat_family.dockerfile.j2' %}
+
+{% block pip_installs %}
+RUN python3 -m pip install pyelftools
+{% endblock %}
+
+
+{% block before_meson_after_pip %}
+RUN yum --disableplugin=subscription-manager clean all
+{% endblock %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/rhel7.dockerfile.j2 b/containers/template_engine/templates/containers/rhel7.dockerfile.j2
new file mode 100644
index 0000000..ccfc0ec
--- /dev/null
+++ b/containers/template_engine/templates/containers/rhel7.dockerfile.j2
@@ -0,0 +1,19 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/rhel.dockerfile.j2' %}
+
+{% block pre_package_manager %}
+# repolist is needed to refresh the RHEL repos from the host this is being built on
+RUN yum repolist
+# Yes this next step is gross, there is no better way to enable the repos in the UBI containers.
+RUN sed -i '/\[rhel-7-server-extras-rpms\]/,/^ *\[/ s/enabled\ =\ 0/enabled\ =\ 1/' /etc/yum.repos.d/redhat.repo \
+ && sed -i '/\[rhel-7-server-optional-rpms\]/,/^ *\[/ s/enabled\ =\ 0/enabled\ =\ 1/' /etc/yum.repos.d/redhat.repo
+RUN yum install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
+RUN yum --disableplugin=subscription-manager update -y
+
+RUN yum groupinstall -y 'Development Tools'
+{% endblock %}
+
+{% block install_libabigail %}
+{# Install via package manager #}
+{% endblock install_libabigail %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/rhel8.dockerfile.j2 b/containers/template_engine/templates/containers/rhel8.dockerfile.j2
new file mode 100644
index 0000000..dcaffc9
--- /dev/null
+++ b/containers/template_engine/templates/containers/rhel8.dockerfile.j2
@@ -0,0 +1,19 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/rhel.dockerfile.j2' %}
+
+{% block pre_package_manager %}
+# repolist is needed to refresh the RHEL repos from the host this is being built on
+RUN yum repolist
+RUN yum --disableplugin=subscription-manager update -y
+RUN yum --disableplugin=subscription-manager config-manager --set-enable codeready-builder-for-rhel-8-$(uname -i)-rpms
+
+# Required to install ccache
+RUN yum install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm && yum upgrade -y
+
+RUN yum groupinstall -y 'Development Tools'
+{% endblock %}
+
+{% block install_libabigail %}
+{# Install via package manager #}
+{% endblock install_libabigail %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/rhel9.dockerfile.j2 b/containers/template_engine/templates/containers/rhel9.dockerfile.j2
new file mode 100644
index 0000000..8f0eccc
--- /dev/null
+++ b/containers/template_engine/templates/containers/rhel9.dockerfile.j2
@@ -0,0 +1,25 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/rhel.dockerfile.j2' %}
+
+{% block pre_package_manager %}
+# repolist is needed to refresh the RHEL repos from the host this is being built on
+RUN yum repolist
+RUN yum --disableplugin=subscription-manager config-manager --set-enable codeready-builder-for-rhel-9-$(uname -i)-rpms
+RUN yum --disableplugin=subscription-manager update -y
+
+# Required to install ccache
+RUN yum install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-9.noarch.rpm && yum upgrade -y
+
+RUN yum groupinstall -y 'Development Tools'
+{% endblock %}
+
+{% block pip_installs %}
+RUN python3 -m pip install pyelftools ninja
+{% endblock %}
+
+{% block install_libabigail %}
+COPY libabigail libabigail
+RUN cd libabigail && mkdir build && autoreconf -i && cd build && ../configure --prefix=/usr/local && make all install && \
+ ldconfig && cd .. && rm -rf libabigail
+{% endblock install_libabigail %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/rpm.dockerfile.j2 b/containers/template_engine/templates/containers/rpm.dockerfile.j2
new file mode 100644
index 0000000..f386b42
--- /dev/null
+++ b/containers/template_engine/templates/containers/rpm.dockerfile.j2
@@ -0,0 +1,3 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/base.dockerfile.j2' %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/ubuntu.dockerfile.j2 b/containers/template_engine/templates/containers/ubuntu.dockerfile.j2
new file mode 100644
index 0000000..c52f866
--- /dev/null
+++ b/containers/template_engine/templates/containers/ubuntu.dockerfile.j2
@@ -0,0 +1,3 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/debian.dockerfile.j2' %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/ubuntu20.04.dockerfile.j2 b/containers/template_engine/templates/containers/ubuntu20.04.dockerfile.j2
new file mode 100644
index 0000000..e3f7402
--- /dev/null
+++ b/containers/template_engine/templates/containers/ubuntu20.04.dockerfile.j2
@@ -0,0 +1,12 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/ubuntu.dockerfile.j2' %}
+
+{% block pip_installs -%}
+RUN python3 -m pip install --no-cache-dir requests
+{%- endblock pip_installs %}
+
+{% block before_meson_after_pip -%}
+ADD https://binaries.sonarsource.com/Distribution/sonar-scanner-cli/sonar-scanner-cli-4.6.2.2472-linux.zip /
+ADD https://sonarcloud.io/static/cpp/build-wrapper-linux-x86.zip /
+{%- endblock %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/ubuntu22.04.dockerfile.j2 b/containers/template_engine/templates/containers/ubuntu22.04.dockerfile.j2
new file mode 100644
index 0000000..7a8b971
--- /dev/null
+++ b/containers/template_engine/templates/containers/ubuntu22.04.dockerfile.j2
@@ -0,0 +1,7 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/ubuntu.dockerfile.j2' %}
+
+{% block install_libabigail %}
+# installed by package manager
+{% endblock install_libabigail %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/ubuntu_cross.dockerfile.j2 b/containers/template_engine/templates/containers/ubuntu_cross.dockerfile.j2
new file mode 100644
index 0000000..236efbc
--- /dev/null
+++ b/containers/template_engine/templates/containers/ubuntu_cross.dockerfile.j2
@@ -0,0 +1,11 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/ubuntu20.04.dockerfile.j2' %}
+
+{% block cross_compilation_setup %}
+# Link ccache to different compilers
+ # aarch64 -> ccache
+RUN ln -s $(which ccache) /usr/local/bin/aarch64-linux-gnu-gcc && \
+ # aarch32 -> ccache
+ ln -s $(which ccache) /usr/local/bin/arm-linux-gnueabihf-gcc
+{% endblock cross_compilation_setup %}
\ No newline at end of file
diff --git a/containers/template_engine/templates/containers/ubuntu_sve.dockerfile.j2 b/containers/template_engine/templates/containers/ubuntu_sve.dockerfile.j2
new file mode 100644
index 0000000..3c3e471
--- /dev/null
+++ b/containers/template_engine/templates/containers/ubuntu_sve.dockerfile.j2
@@ -0,0 +1,10 @@
+{#- SPDX-License-Identifier: BSD-3-Clause -#}
+{#- Copyright (c) 2022 University of New Hampshire -#}
+{% extends 'containers/ubuntu20.04.dockerfile.j2' %}
+{% block cross_compilation_setup %}
+RUN ln -s $(which ccache) /usr/local/bin/gcc-10
+{% endblock cross_compilation_setup %}
+
+{% block build_abi %}
+# ABI is disabled for this container
+{% endblock build_abi %}
\ No newline at end of file
--
2.34.1
^ permalink raw reply [flat|nested] 12+ messages in thread* RE: [PATCH v2 4/6] containers/templates: Templates for Dockerfiles
2022-10-19 12:53 ` [PATCH v2 4/6] containers/templates: Templates for Dockerfiles ohilyard
@ 2022-10-19 19:24 ` Ali Alnubani
2022-10-24 12:52 ` Owen Hilyard
0 siblings, 1 reply; 12+ messages in thread
From: Ali Alnubani @ 2022-10-19 19:24 UTC (permalink / raw)
To: ohilyard, ci; +Cc: aconole
> -----Original Message-----
> From: ohilyard@iol.unh.edu <ohilyard@iol.unh.edu>
> Sent: Wednesday, October 19, 2022 3:53 PM
> To: ci@dpdk.org
> Cc: aconole@redhat.com; Ali Alnubani <alialnu@nvidia.com>; Owen Hilyard
> <ohilyard@iol.unh.edu>
> Subject: [PATCH v2 4/6] containers/templates: Templates for Dockerfiles
>
> From: Owen Hilyard <ohilyard@iol.unh.edu>
>
> Adds a variety of extensible templates used to create the Dockerfiles
> for each target. All templates inherit from base, and most distros and
> distro families have their own templates that are used to define common
> functionality. Multiple versions of a distro may use a single template
> if they are similar enough (ex: fedora).
>
> Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
> ---
[..]
> diff --git
> a/containers/template_engine/templates/containers/base.dockerfile.j2
> b/containers/template_engine/templates/containers/base.dockerfile.j2
> new file mode 100644
> index 0000000..c6194e9
> --- /dev/null
> +++ b/containers/template_engine/templates/containers/base.dockerfile.j2
> @@ -0,0 +1,81 @@
[..]
> +# install libabigail
> +{% block install_libabigail %}
> +COPY libabigail libabigail
> +RUN --mount=type=cache,target=/ccache cd libabigail && mkdir build &&
> autoreconf -i && cd build && ../configure --prefix=/usr/local && make all
> install && \
> + ldconfig && cd .. && rm -rf libabigail
Current directory is /libabigail/build/. You need to go back another directory before executing "rm -rf libabigail".
$ podman run -it --rm localhost/ubuntu20.04_compile
$ du -chs /libabigail/
1.9G /libabigail/
1.9G total
By the way, do we have to build libabigail when DPDK_CI_CONTAINERS_BUILD_ABI is disabled?
> +{% endblock install_libabigail %}
[..]
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH v2 4/6] containers/templates: Templates for Dockerfiles
2022-10-19 19:24 ` Ali Alnubani
@ 2022-10-24 12:52 ` Owen Hilyard
0 siblings, 0 replies; 12+ messages in thread
From: Owen Hilyard @ 2022-10-24 12:52 UTC (permalink / raw)
To: Ali Alnubani; +Cc: ci, aconole
[-- Attachment #1: Type: text/plain, Size: 2267 bytes --]
On Wed, Oct 19, 2022 at 3:24 PM Ali Alnubani <alialnu@nvidia.com> wrote:
> > -----Original Message-----
> > From: ohilyard@iol.unh.edu <ohilyard@iol.unh.edu>
> > Sent: Wednesday, October 19, 2022 3:53 PM
> > To: ci@dpdk.org
> > Cc: aconole@redhat.com; Ali Alnubani <alialnu@nvidia.com>; Owen Hilyard
> > <ohilyard@iol.unh.edu>
> > Subject: [PATCH v2 4/6] containers/templates: Templates for Dockerfiles
> >
> > From: Owen Hilyard <ohilyard@iol.unh.edu>
> >
> > Adds a variety of extensible templates used to create the Dockerfiles
> > for each target. All templates inherit from base, and most distros and
> > distro families have their own templates that are used to define common
> > functionality. Multiple versions of a distro may use a single template
> > if they are similar enough (ex: fedora).
> >
> > Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
> > ---
> [..]
> > diff --git
> > a/containers/template_engine/templates/containers/base.dockerfile.j2
> > b/containers/template_engine/templates/containers/base.dockerfile.j2
> > new file mode 100644
> > index 0000000..c6194e9
> > --- /dev/null
> > +++ b/containers/template_engine/templates/containers/base.dockerfile.j2
> > @@ -0,0 +1,81 @@
> [..]
> > +# install libabigail
> > +{% block install_libabigail %}
> > +COPY libabigail libabigail
> > +RUN --mount=type=cache,target=/ccache cd libabigail && mkdir build &&
> > autoreconf -i && cd build && ../configure --prefix=/usr/local && make all
> > install && \
> > + ldconfig && cd .. && rm -rf libabigail
>
> Current directory is /libabigail/build/. You need to go back another
> directory before executing "rm -rf libabigail".
>
> $ podman run -it --rm localhost/ubuntu20.04_compile
> $ du -chs /libabigail/
> 1.9G /libabigail/
> 1.9G total
>
I'll fix that for v3.
> By the way, do we have to build libabigail when
> DPDK_CI_CONTAINERS_BUILD_ABI is disabled?
>
Technically no, but libabigail is installed via the package manager for
distros that have it (Fedora, RHEL 7 & 8, and a few others). At UNH, we
value environment consistency (same tools in every container) much more
than disk space or build time. I'll add an option for anyone who has
different preferences/priorities in v3.
> > +{% endblock install_libabigail %}
> [..]
>
[-- Attachment #2: Type: text/html, Size: 3686 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 5/6] containers/container_builder: Container for python scripts
2022-10-19 12:53 [PATCH v2 0/6] Community Lab Container Definitions ohilyard
` (3 preceding siblings ...)
2022-10-19 12:53 ` [PATCH v2 4/6] containers/templates: Templates for Dockerfiles ohilyard
@ 2022-10-19 12:53 ` ohilyard
2022-10-19 12:53 ` [PATCH v2 6/6] containers/Makefile: Makefile to automate builds ohilyard
` (2 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: ohilyard @ 2022-10-19 12:53 UTC (permalink / raw)
To: ci; +Cc: aconole, alialnu, Owen Hilyard
From: Owen Hilyard <ohilyard@iol.unh.edu>
Adds a container that can be used to run the python scripts to create
the Dockerfiles for the CI containers. This removes a large number of
python environment dependencies from the host requirements.
The lockfile for poetry has also been added to help ensure that the
container is always built in a known-working state.
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
---
containers/container_builder.dockerfile | 26 +++
containers/template_engine/poetry.lock | 220 ++++++++++++++++++++++++
2 files changed, 246 insertions(+)
create mode 100644 containers/container_builder.dockerfile
create mode 100644 containers/template_engine/poetry.lock
diff --git a/containers/container_builder.dockerfile b/containers/container_builder.dockerfile
new file mode 100644
index 0000000..8a38e53
--- /dev/null
+++ b/containers/container_builder.dockerfile
@@ -0,0 +1,26 @@
+FROM ubuntu:22.04
+
+ENV DPDK_CI_CONTAINERS_COMPOSE_FILE_BUILDER=podman-compose
+ENV DPDK_CI_CONTAINER_BUILDER_PROGRAM=podman
+ENV DPDK_CI_CONTAINERS_PYTHON3_CMD=python3
+ENV DEBIAN_FRONTEND=noninteractive
+
+# If building on a RHEL host, 'yum repolist' will refresh the RHEL repos from the host this is being built on
+RUN apt-get update && apt-get install --no-install-recommends -y \
+ python3 python3-pip \
+ # Makefile deps
+ make git
+RUN pip3 install poetry
+
+RUN git config --global --add safe.directory /container_workspace/container_context/dpdk
+RUN git config --global --add safe.directory /container_workspace/container_context/libabigail
+
+# Globally install required python libraries
+COPY template_engine/pyproject.toml /tmp/pyproject.toml
+COPY template_engine/poetry.lock /tmp/poetry.lock
+WORKDIR /tmp/
+RUN poetry config virtualenvs.create false
+RUN poetry install --no-interaction --no-ansi
+
+RUN mkdir /container_workspace
+WORKDIR /container_workspace
diff --git a/containers/template_engine/poetry.lock b/containers/template_engine/poetry.lock
new file mode 100644
index 0000000..87ba829
--- /dev/null
+++ b/containers/template_engine/poetry.lock
@@ -0,0 +1,220 @@
+[[package]]
+name = "attrs"
+version = "22.1.0"
+description = "Classes Without Boilerplate"
+category = "main"
+optional = false
+python-versions = ">=3.5"
+
+[package.extras]
+dev = ["coverage[toml] (>=5.0.2)", "hypothesis", "pympler", "pytest (>=4.3.0)", "mypy (>=0.900,!=0.940)", "pytest-mypy-plugins", "zope.interface", "furo", "sphinx", "sphinx-notfound-page", "pre-commit", "cloudpickle"]
+docs = ["furo", "sphinx", "zope.interface", "sphinx-notfound-page"]
+tests = ["coverage[toml] (>=5.0.2)", "hypothesis", "pympler", "pytest (>=4.3.0)", "mypy (>=0.900,!=0.940)", "pytest-mypy-plugins", "zope.interface", "cloudpickle"]
+tests_no_zope = ["coverage[toml] (>=5.0.2)", "hypothesis", "pympler", "pytest (>=4.3.0)", "mypy (>=0.900,!=0.940)", "pytest-mypy-plugins", "cloudpickle"]
+
+[[package]]
+name = "importlib-resources"
+version = "5.9.0"
+description = "Read resources from Python packages"
+category = "main"
+optional = false
+python-versions = ">=3.7"
+
+[package.dependencies]
+zipp = {version = ">=3.1.0", markers = "python_version < \"3.10\""}
+
+[package.extras]
+docs = ["sphinx", "jaraco.packaging (>=9)", "rst.linker (>=1.9)", "jaraco.tidelift (>=1.4)"]
+testing = ["pytest (>=6)", "pytest-checkdocs (>=2.4)", "pytest-flake8", "pytest-cov", "pytest-enabler (>=1.3)", "pytest-black (>=0.3.7)", "pytest-mypy (>=0.9.1)"]
+
+[[package]]
+name = "jinja2"
+version = "3.1.2"
+description = "A very fast and expressive template engine."
+category = "main"
+optional = false
+python-versions = ">=3.7"
+
+[package.dependencies]
+MarkupSafe = ">=2.0"
+
+[package.extras]
+i18n = ["Babel (>=2.7)"]
+
+[[package]]
+name = "jsonschema"
+version = "4.10.0"
+description = "An implementation of JSON Schema validation for Python"
+category = "main"
+optional = false
+python-versions = ">=3.7"
+
+[package.dependencies]
+attrs = ">=17.4.0"
+importlib-resources = {version = ">=1.4.0", markers = "python_version < \"3.9\""}
+pkgutil-resolve-name = {version = ">=1.3.10", markers = "python_version < \"3.9\""}
+pyrsistent = ">=0.14.0,<0.17.0 || >0.17.0,<0.17.1 || >0.17.1,<0.17.2 || >0.17.2"
+
+[package.extras]
+format = ["fqdn", "idna", "isoduration", "jsonpointer (>1.13)", "rfc3339-validator", "rfc3987", "uri-template", "webcolors (>=1.11)"]
+format-nongpl = ["fqdn", "idna", "isoduration", "jsonpointer (>1.13)", "rfc3339-validator", "rfc3986-validator (>0.1.0)", "uri-template", "webcolors (>=1.11)"]
+
+[[package]]
+name = "markupsafe"
+version = "2.1.1"
+description = "Safely add untrusted strings to HTML/XML markup."
+category = "main"
+optional = false
+python-versions = ">=3.7"
+
+[[package]]
+name = "pkgutil-resolve-name"
+version = "1.3.10"
+description = "Resolve a name to an object."
+category = "main"
+optional = false
+python-versions = ">=3.6"
+
+[[package]]
+name = "pyrsistent"
+version = "0.18.1"
+description = "Persistent/Functional/Immutable data structures"
+category = "main"
+optional = false
+python-versions = ">=3.7"
+
+[[package]]
+name = "pyyaml"
+version = "6.0"
+description = "YAML parser and emitter for Python"
+category = "main"
+optional = false
+python-versions = ">=3.6"
+
+[[package]]
+name = "zipp"
+version = "3.8.1"
+description = "Backport of pathlib-compatible object wrapper for zip files"
+category = "main"
+optional = false
+python-versions = ">=3.7"
+
+[package.extras]
+docs = ["sphinx", "jaraco.packaging (>=9)", "rst.linker (>=1.9)", "jaraco.tidelift (>=1.4)"]
+testing = ["pytest (>=6)", "pytest-checkdocs (>=2.4)", "pytest-flake8", "pytest-cov", "pytest-enabler (>=1.3)", "jaraco.itertools", "func-timeout", "pytest-black (>=0.3.7)", "pytest-mypy (>=0.9.1)"]
+
+[metadata]
+lock-version = "1.1"
+python-versions = "^3.8"
+content-hash = "6afb29c80b2176acf4af522df8b53c4f5334b7fe66e8360e832a82b7d9fe830a"
+
+[metadata.files]
+attrs = []
+importlib-resources = []
+jinja2 = [
+ {file = "Jinja2-3.1.2-py3-none-any.whl", hash = "sha256:6088930bfe239f0e6710546ab9c19c9ef35e29792895fed6e6e31a023a182a61"},
+ {file = "Jinja2-3.1.2.tar.gz", hash = "sha256:31351a702a408a9e7595a8fc6150fc3f43bb6bf7e319770cbc0db9df9437e852"},
+]
+jsonschema = []
+markupsafe = [
+ {file = "MarkupSafe-2.1.1-cp310-cp310-macosx_10_9_universal2.whl", hash = "sha256:86b1f75c4e7c2ac2ccdaec2b9022845dbb81880ca318bb7a0a01fbf7813e3812"},
+ {file = "MarkupSafe-2.1.1-cp310-cp310-macosx_10_9_x86_64.whl", hash = "sha256:f121a1420d4e173a5d96e47e9a0c0dcff965afdf1626d28de1460815f7c4ee7a"},
+ {file = "MarkupSafe-2.1.1-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:a49907dd8420c5685cfa064a1335b6754b74541bbb3706c259c02ed65b644b3e"},
+ {file = "MarkupSafe-2.1.1-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:10c1bfff05d95783da83491be968e8fe789263689c02724e0c691933c52994f5"},
+ {file = "MarkupSafe-2.1.1-cp310-cp310-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:b7bd98b796e2b6553da7225aeb61f447f80a1ca64f41d83612e6139ca5213aa4"},
+ {file = "MarkupSafe-2.1.1-cp310-cp310-musllinux_1_1_aarch64.whl", hash = "sha256:b09bf97215625a311f669476f44b8b318b075847b49316d3e28c08e41a7a573f"},
+ {file = "MarkupSafe-2.1.1-cp310-cp310-musllinux_1_1_i686.whl", hash = "sha256:694deca8d702d5db21ec83983ce0bb4b26a578e71fbdbd4fdcd387daa90e4d5e"},
+ {file = "MarkupSafe-2.1.1-cp310-cp310-musllinux_1_1_x86_64.whl", hash = "sha256:efc1913fd2ca4f334418481c7e595c00aad186563bbc1ec76067848c7ca0a933"},
+ {file = "MarkupSafe-2.1.1-cp310-cp310-win32.whl", hash = "sha256:4a33dea2b688b3190ee12bd7cfa29d39c9ed176bda40bfa11099a3ce5d3a7ac6"},
+ {file = "MarkupSafe-2.1.1-cp310-cp310-win_amd64.whl", hash = "sha256:dda30ba7e87fbbb7eab1ec9f58678558fd9a6b8b853530e176eabd064da81417"},
+ {file = "MarkupSafe-2.1.1-cp37-cp37m-macosx_10_9_x86_64.whl", hash = "sha256:671cd1187ed5e62818414afe79ed29da836dde67166a9fac6d435873c44fdd02"},
+ {file = "MarkupSafe-2.1.1-cp37-cp37m-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:3799351e2336dc91ea70b034983ee71cf2f9533cdff7c14c90ea126bfd95d65a"},
+ {file = "MarkupSafe-2.1.1-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:e72591e9ecd94d7feb70c1cbd7be7b3ebea3f548870aa91e2732960fa4d57a37"},
+ {file = "MarkupSafe-2.1.1-cp37-cp37m-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:6fbf47b5d3728c6aea2abb0589b5d30459e369baa772e0f37a0320185e87c980"},
+ {file = "MarkupSafe-2.1.1-cp37-cp37m-musllinux_1_1_aarch64.whl", hash = "sha256:d5ee4f386140395a2c818d149221149c54849dfcfcb9f1debfe07a8b8bd63f9a"},
+ {file = "MarkupSafe-2.1.1-cp37-cp37m-musllinux_1_1_i686.whl", hash = "sha256:bcb3ed405ed3222f9904899563d6fc492ff75cce56cba05e32eff40e6acbeaa3"},
+ {file = "MarkupSafe-2.1.1-cp37-cp37m-musllinux_1_1_x86_64.whl", hash = "sha256:e1c0b87e09fa55a220f058d1d49d3fb8df88fbfab58558f1198e08c1e1de842a"},
+ {file = "MarkupSafe-2.1.1-cp37-cp37m-win32.whl", hash = "sha256:8dc1c72a69aa7e082593c4a203dcf94ddb74bb5c8a731e4e1eb68d031e8498ff"},
+ {file = "MarkupSafe-2.1.1-cp37-cp37m-win_amd64.whl", hash = "sha256:97a68e6ada378df82bc9f16b800ab77cbf4b2fada0081794318520138c088e4a"},
+ {file = "MarkupSafe-2.1.1-cp38-cp38-macosx_10_9_universal2.whl", hash = "sha256:e8c843bbcda3a2f1e3c2ab25913c80a3c5376cd00c6e8c4a86a89a28c8dc5452"},
+ {file = "MarkupSafe-2.1.1-cp38-cp38-macosx_10_9_x86_64.whl", hash = "sha256:0212a68688482dc52b2d45013df70d169f542b7394fc744c02a57374a4207003"},
+ {file = "MarkupSafe-2.1.1-cp38-cp38-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:8e576a51ad59e4bfaac456023a78f6b5e6e7651dcd383bcc3e18d06f9b55d6d1"},
+ {file = "MarkupSafe-2.1.1-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:4b9fe39a2ccc108a4accc2676e77da025ce383c108593d65cc909add5c3bd601"},
+ {file = "MarkupSafe-2.1.1-cp38-cp38-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:96e37a3dc86e80bf81758c152fe66dbf60ed5eca3d26305edf01892257049925"},
+ {file = "MarkupSafe-2.1.1-cp38-cp38-musllinux_1_1_aarch64.whl", hash = "sha256:6d0072fea50feec76a4c418096652f2c3238eaa014b2f94aeb1d56a66b41403f"},
+ {file = "MarkupSafe-2.1.1-cp38-cp38-musllinux_1_1_i686.whl", hash = "sha256:089cf3dbf0cd6c100f02945abeb18484bd1ee57a079aefd52cffd17fba910b88"},
+ {file = "MarkupSafe-2.1.1-cp38-cp38-musllinux_1_1_x86_64.whl", hash = "sha256:6a074d34ee7a5ce3effbc526b7083ec9731bb3cbf921bbe1d3005d4d2bdb3a63"},
+ {file = "MarkupSafe-2.1.1-cp38-cp38-win32.whl", hash = "sha256:421be9fbf0ffe9ffd7a378aafebbf6f4602d564d34be190fc19a193232fd12b1"},
+ {file = "MarkupSafe-2.1.1-cp38-cp38-win_amd64.whl", hash = "sha256:fc7b548b17d238737688817ab67deebb30e8073c95749d55538ed473130ec0c7"},
+ {file = "MarkupSafe-2.1.1-cp39-cp39-macosx_10_9_universal2.whl", hash = "sha256:e04e26803c9c3851c931eac40c695602c6295b8d432cbe78609649ad9bd2da8a"},
+ {file = "MarkupSafe-2.1.1-cp39-cp39-macosx_10_9_x86_64.whl", hash = "sha256:b87db4360013327109564f0e591bd2a3b318547bcef31b468a92ee504d07ae4f"},
+ {file = "MarkupSafe-2.1.1-cp39-cp39-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:99a2a507ed3ac881b975a2976d59f38c19386d128e7a9a18b7df6fff1fd4c1d6"},
+ {file = "MarkupSafe-2.1.1-cp39-cp39-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:56442863ed2b06d19c37f94d999035e15ee982988920e12a5b4ba29b62ad1f77"},
+ {file = "MarkupSafe-2.1.1-cp39-cp39-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:3ce11ee3f23f79dbd06fb3d63e2f6af7b12db1d46932fe7bd8afa259a5996603"},
+ {file = "MarkupSafe-2.1.1-cp39-cp39-musllinux_1_1_aarch64.whl", hash = "sha256:33b74d289bd2f5e527beadcaa3f401e0df0a89927c1559c8566c066fa4248ab7"},
+ {file = "MarkupSafe-2.1.1-cp39-cp39-musllinux_1_1_i686.whl", hash = "sha256:43093fb83d8343aac0b1baa75516da6092f58f41200907ef92448ecab8825135"},
+ {file = "MarkupSafe-2.1.1-cp39-cp39-musllinux_1_1_x86_64.whl", hash = "sha256:8e3dcf21f367459434c18e71b2a9532d96547aef8a871872a5bd69a715c15f96"},
+ {file = "MarkupSafe-2.1.1-cp39-cp39-win32.whl", hash = "sha256:d4306c36ca495956b6d568d276ac11fdd9c30a36f1b6eb928070dc5360b22e1c"},
+ {file = "MarkupSafe-2.1.1-cp39-cp39-win_amd64.whl", hash = "sha256:46d00d6cfecdde84d40e572d63735ef81423ad31184100411e6e3388d405e247"},
+ {file = "MarkupSafe-2.1.1.tar.gz", hash = "sha256:7f91197cc9e48f989d12e4e6fbc46495c446636dfc81b9ccf50bb0ec74b91d4b"},
+]
+pkgutil-resolve-name = []
+pyrsistent = [
+ {file = "pyrsistent-0.18.1-cp310-cp310-macosx_10_9_universal2.whl", hash = "sha256:df46c854f490f81210870e509818b729db4488e1f30f2a1ce1698b2295a878d1"},
+ {file = "pyrsistent-0.18.1-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:5d45866ececf4a5fff8742c25722da6d4c9e180daa7b405dc0a2a2790d668c26"},
+ {file = "pyrsistent-0.18.1-cp310-cp310-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:4ed6784ceac462a7d6fcb7e9b663e93b9a6fb373b7f43594f9ff68875788e01e"},
+ {file = "pyrsistent-0.18.1-cp310-cp310-win32.whl", hash = "sha256:e4f3149fd5eb9b285d6bfb54d2e5173f6a116fe19172686797c056672689daf6"},
+ {file = "pyrsistent-0.18.1-cp310-cp310-win_amd64.whl", hash = "sha256:636ce2dc235046ccd3d8c56a7ad54e99d5c1cd0ef07d9ae847306c91d11b5fec"},
+ {file = "pyrsistent-0.18.1-cp37-cp37m-macosx_10_9_x86_64.whl", hash = "sha256:e92a52c166426efbe0d1ec1332ee9119b6d32fc1f0bbfd55d5c1088070e7fc1b"},
+ {file = "pyrsistent-0.18.1-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:d7a096646eab884bf8bed965bad63ea327e0d0c38989fc83c5ea7b8a87037bfc"},
+ {file = "pyrsistent-0.18.1-cp37-cp37m-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:cdfd2c361b8a8e5d9499b9082b501c452ade8bbf42aef97ea04854f4a3f43b22"},
+ {file = "pyrsistent-0.18.1-cp37-cp37m-win32.whl", hash = "sha256:7ec335fc998faa4febe75cc5268a9eac0478b3f681602c1f27befaf2a1abe1d8"},
+ {file = "pyrsistent-0.18.1-cp37-cp37m-win_amd64.whl", hash = "sha256:6455fc599df93d1f60e1c5c4fe471499f08d190d57eca040c0ea182301321286"},
+ {file = "pyrsistent-0.18.1-cp38-cp38-macosx_10_9_universal2.whl", hash = "sha256:fd8da6d0124efa2f67d86fa70c851022f87c98e205f0594e1fae044e7119a5a6"},
+ {file = "pyrsistent-0.18.1-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:7bfe2388663fd18bd8ce7db2c91c7400bf3e1a9e8bd7d63bf7e77d39051b85ec"},
+ {file = "pyrsistent-0.18.1-cp38-cp38-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:0e3e1fcc45199df76053026a51cc59ab2ea3fc7c094c6627e93b7b44cdae2c8c"},
+ {file = "pyrsistent-0.18.1-cp38-cp38-win32.whl", hash = "sha256:b568f35ad53a7b07ed9b1b2bae09eb15cdd671a5ba5d2c66caee40dbf91c68ca"},
+ {file = "pyrsistent-0.18.1-cp38-cp38-win_amd64.whl", hash = "sha256:d1b96547410f76078eaf66d282ddca2e4baae8964364abb4f4dcdde855cd123a"},
+ {file = "pyrsistent-0.18.1-cp39-cp39-macosx_10_9_universal2.whl", hash = "sha256:f87cc2863ef33c709e237d4b5f4502a62a00fab450c9e020892e8e2ede5847f5"},
+ {file = "pyrsistent-0.18.1-cp39-cp39-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:6bc66318fb7ee012071b2792024564973ecc80e9522842eb4e17743604b5e045"},
+ {file = "pyrsistent-0.18.1-cp39-cp39-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:914474c9f1d93080338ace89cb2acee74f4f666fb0424896fcfb8d86058bf17c"},
+ {file = "pyrsistent-0.18.1-cp39-cp39-win32.whl", hash = "sha256:1b34eedd6812bf4d33814fca1b66005805d3640ce53140ab8bbb1e2651b0d9bc"},
+ {file = "pyrsistent-0.18.1-cp39-cp39-win_amd64.whl", hash = "sha256:e24a828f57e0c337c8d8bb9f6b12f09dfdf0273da25fda9e314f0b684b415a07"},
+ {file = "pyrsistent-0.18.1.tar.gz", hash = "sha256:d4d61f8b993a7255ba714df3aca52700f8125289f84f704cf80916517c46eb96"},
+]
+pyyaml = [
+ {file = "PyYAML-6.0-cp310-cp310-macosx_10_9_x86_64.whl", hash = "sha256:d4db7c7aef085872ef65a8fd7d6d09a14ae91f691dec3e87ee5ee0539d516f53"},
+ {file = "PyYAML-6.0-cp310-cp310-macosx_11_0_arm64.whl", hash = "sha256:9df7ed3b3d2e0ecfe09e14741b857df43adb5a3ddadc919a2d94fbdf78fea53c"},
+ {file = "PyYAML-6.0-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:77f396e6ef4c73fdc33a9157446466f1cff553d979bd00ecb64385760c6babdc"},
+ {file = "PyYAML-6.0-cp310-cp310-manylinux_2_17_s390x.manylinux2014_s390x.whl", hash = "sha256:a80a78046a72361de73f8f395f1f1e49f956c6be882eed58505a15f3e430962b"},
+ {file = "PyYAML-6.0-cp310-cp310-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl", hash = "sha256:f84fbc98b019fef2ee9a1cb3ce93e3187a6df0b2538a651bfb890254ba9f90b5"},
+ {file = "PyYAML-6.0-cp310-cp310-win32.whl", hash = "sha256:2cd5df3de48857ed0544b34e2d40e9fac445930039f3cfe4bcc592a1f836d513"},
+ {file = "PyYAML-6.0-cp310-cp310-win_amd64.whl", hash = "sha256:daf496c58a8c52083df09b80c860005194014c3698698d1a57cbcfa182142a3a"},
+ {file = "PyYAML-6.0-cp36-cp36m-macosx_10_9_x86_64.whl", hash = "sha256:897b80890765f037df3403d22bab41627ca8811ae55e9a722fd0392850ec4d86"},
+ {file = "PyYAML-6.0-cp36-cp36m-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:50602afada6d6cbfad699b0c7bb50d5ccffa7e46a3d738092afddc1f9758427f"},
+ {file = "PyYAML-6.0-cp36-cp36m-manylinux_2_17_s390x.manylinux2014_s390x.whl", hash = "sha256:48c346915c114f5fdb3ead70312bd042a953a8ce5c7106d5bfb1a5254e47da92"},
+ {file = "PyYAML-6.0-cp36-cp36m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl", hash = "sha256:98c4d36e99714e55cfbaaee6dd5badbc9a1ec339ebfc3b1f52e293aee6bb71a4"},
+ {file = "PyYAML-6.0-cp36-cp36m-win32.whl", hash = "sha256:0283c35a6a9fbf047493e3a0ce8d79ef5030852c51e9d911a27badfde0605293"},
+ {file = "PyYAML-6.0-cp36-cp36m-win_amd64.whl", hash = "sha256:07751360502caac1c067a8132d150cf3d61339af5691fe9e87803040dbc5db57"},
+ {file = "PyYAML-6.0-cp37-cp37m-macosx_10_9_x86_64.whl", hash = "sha256:819b3830a1543db06c4d4b865e70ded25be52a2e0631ccd2f6a47a2822f2fd7c"},
+ {file = "PyYAML-6.0-cp37-cp37m-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:473f9edb243cb1935ab5a084eb238d842fb8f404ed2193a915d1784b5a6b5fc0"},
+ {file = "PyYAML-6.0-cp37-cp37m-manylinux_2_17_s390x.manylinux2014_s390x.whl", hash = "sha256:0ce82d761c532fe4ec3f87fc45688bdd3a4c1dc5e0b4a19814b9009a29baefd4"},
+ {file = "PyYAML-6.0-cp37-cp37m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl", hash = "sha256:231710d57adfd809ef5d34183b8ed1eeae3f76459c18fb4a0b373ad56bedcdd9"},
+ {file = "PyYAML-6.0-cp37-cp37m-win32.whl", hash = "sha256:c5687b8d43cf58545ade1fe3e055f70eac7a5a1a0bf42824308d868289a95737"},
+ {file = "PyYAML-6.0-cp37-cp37m-win_amd64.whl", hash = "sha256:d15a181d1ecd0d4270dc32edb46f7cb7733c7c508857278d3d378d14d606db2d"},
+ {file = "PyYAML-6.0-cp38-cp38-macosx_10_9_x86_64.whl", hash = "sha256:0b4624f379dab24d3725ffde76559cff63d9ec94e1736b556dacdfebe5ab6d4b"},
+ {file = "PyYAML-6.0-cp38-cp38-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:213c60cd50106436cc818accf5baa1aba61c0189ff610f64f4a3e8c6726218ba"},
+ {file = "PyYAML-6.0-cp38-cp38-manylinux_2_17_s390x.manylinux2014_s390x.whl", hash = "sha256:9fa600030013c4de8165339db93d182b9431076eb98eb40ee068700c9c813e34"},
+ {file = "PyYAML-6.0-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl", hash = "sha256:277a0ef2981ca40581a47093e9e2d13b3f1fbbeffae064c1d21bfceba2030287"},
+ {file = "PyYAML-6.0-cp38-cp38-win32.whl", hash = "sha256:d4eccecf9adf6fbcc6861a38015c2a64f38b9d94838ac1810a9023a0609e1b78"},
+ {file = "PyYAML-6.0-cp38-cp38-win_amd64.whl", hash = "sha256:1e4747bc279b4f613a09eb64bba2ba602d8a6664c6ce6396a4d0cd413a50ce07"},
+ {file = "PyYAML-6.0-cp39-cp39-macosx_10_9_x86_64.whl", hash = "sha256:055d937d65826939cb044fc8c9b08889e8c743fdc6a32b33e2390f66013e449b"},
+ {file = "PyYAML-6.0-cp39-cp39-macosx_11_0_arm64.whl", hash = "sha256:e61ceaab6f49fb8bdfaa0f92c4b57bcfbea54c09277b1b4f7ac376bfb7a7c174"},
+ {file = "PyYAML-6.0-cp39-cp39-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:d67d839ede4ed1b28a4e8909735fc992a923cdb84e618544973d7dfc71540803"},
+ {file = "PyYAML-6.0-cp39-cp39-manylinux_2_17_s390x.manylinux2014_s390x.whl", hash = "sha256:cba8c411ef271aa037d7357a2bc8f9ee8b58b9965831d9e51baf703280dc73d3"},
+ {file = "PyYAML-6.0-cp39-cp39-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl", hash = "sha256:40527857252b61eacd1d9af500c3337ba8deb8fc298940291486c465c8b46ec0"},
+ {file = "PyYAML-6.0-cp39-cp39-win32.whl", hash = "sha256:b5b9eccad747aabaaffbc6064800670f0c297e52c12754eb1d976c57e4f74dcb"},
+ {file = "PyYAML-6.0-cp39-cp39-win_amd64.whl", hash = "sha256:b3d267842bf12586ba6c734f89d1f5b871df0273157918b0ccefa29deb05c21c"},
+ {file = "PyYAML-6.0.tar.gz", hash = "sha256:68fb519c14306fec9720a2a5b45bc9f0c8d1b9c72adf45c37baedfcd949c35a2"},
+]
+zipp = []
--
2.34.1
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 6/6] containers/Makefile: Makefile to automate builds
2022-10-19 12:53 [PATCH v2 0/6] Community Lab Container Definitions ohilyard
` (4 preceding siblings ...)
2022-10-19 12:53 ` [PATCH v2 5/6] containers/container_builder: Container for python scripts ohilyard
@ 2022-10-19 12:53 ` ohilyard
2022-10-19 14:31 ` [PATCH v2 0/6] Community Lab Container Definitions Ali Alnubani
2022-10-20 8:25 ` Ali Alnubani
7 siblings, 0 replies; 12+ messages in thread
From: ohilyard @ 2022-10-19 12:53 UTC (permalink / raw)
To: ci; +Cc: aconole, alialnu, Owen Hilyard
From: Owen Hilyard <ohilyard@iol.unh.edu>
The Makefile that can be used to build all of the container images using
"make build", and can also be used to push them to a remote repository
(for use in CI).
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
---
containers/Makefile | 152 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 152 insertions(+)
create mode 100644 containers/Makefile
diff --git a/containers/Makefile b/containers/Makefile
new file mode 100644
index 0000000..301687e
--- /dev/null
+++ b/containers/Makefile
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2022 University of New Hampshire
+
+# Recommended Resources:
+# All:
+# ~100 GB of disk space: These are not minimal containers, they
+# have full distros in them minus the kernel.
+# With ABI images, expect 10 GB per distro per
+# platform. Without, it's closer to 2 GB per distro
+# per platform.
+#
+# No ABI:
+# Serial Build (make -j 1): Should run on any post 2010 system reasonably well.
+# Parallel build (make -j $(nproc)): 1 GB of free ram per job should be good enough.
+# ABI:
+# Time: If you are building more than four distros, or you have one distro that is built under
+# emulation (x86 host + arm container or the inverse), it may be best to run it overnight.
+# Some versions of qemu + podman will try to compile with a single thread under emulation,
+# which can cause what should be an hour-long compile to turn into a 8+ hour compile.
+# Serial Build (make -j 1): 6 GB of free ram should be fine
+# Parallel build (make -j $(nproc)): 6 GB of free ram per job. You may be compiling ~20 versions of DPDK at the same time, with some under emulation.
+#
+
+
+############ Arguments #############
+# Set to 'Y' to override distro detection
+DPDK_CI_CONTAINERS_ON_RHEL?=$(shell (test -f /etc/redhat-release && grep -q 'Red Hat Enterprise Linux' /etc/redhat-release && echo 'Y') || echo 'N')
+
+# If set to 'Y' and any container is detected as unbuildable, fail the build.
+DPDK_CI_CONTAINERS_FAIL_ON_UNBUILDABLE?=N
+
+# If set to 'Y', build
+DPDK_CI_CONTAINERS_BUILD_ABI?=N
+
+# Used to set the python interpreter
+DPDK_CI_CONTAINERS_PYTHON3_CMD?=python3.8
+
+# The base program to use to build individual containers.
+DPDK_CI_CONTAINER_BUILDER_PROGRAM?=podman
+
+# The url of the git repository to pull libabigail from
+DPDK_CI_CONTAINERS_LIBABIGAIL_CLONE_URL?=git://sourceware.org/git/libabigail.git
+
+# The url of the git repository to pull DPDK from
+DPDK_CI_CONTAINERS_DPDK_CLONE_URL?=https://dpdk.org/git/dpdk
+
+# The tag to apply to the built container builder image
+DPDK_CI_CONTAINERS_CONTAINER_BUILDER_TAG?=dpdk_ci_container_builder
+
+# Extra arguments to add to the push command, can be used for credentials
+DPDK_CI_CONTAINERS_EXTRA_PUSH_ARGS?=
+
+DPDK_CI_CONTAINERS_REGISTRY_HOSTNAME?=localhost
+
+# The path to a directory to be recursively copied to $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY). Not used if unset.
+# DPDK_CI_CONTAINERS_EXTRA_SCRIPTS_PATH
+
+DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY?=$(CURDIR)/container_context
+############ End Arguments #############
+
+############ Internal Variables #############
+SCRIPT_ARGS=--output-dir "$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)"
+
+ifeq ($(DPDK_CI_CONTAINERS_ON_RHEL), Y)
+ SCRIPT_ARGS +=--rhel
+endif
+
+ifeq ($(DPDK_CI_CONTAINERS_FAIL_ON_UNBUILDABLE), Y)
+ SCRIPT_ARGS +=--fail-on-unbuildable
+endif
+
+ifeq ($(DPDK_CI_CONTAINERS_BUILD_ABI), Y)
+ SCRIPT_ARGS +=--build-abi
+endif
+
+SCRIPT_DIRECTORY=$(CURDIR)/template_engine
+
+LIBABIGAIL_DIRECTORY=$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/libabigail
+DPDK_DIRECTORY=$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/dpdk
+
+DOCKERFILE=$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/Dockerfile
+
+MAKE_DOCKERFILE_SCRIPT=$(SCRIPT_DIRECTORY)/make_dockerfile.py
+MAKE_DOCKERFILE_COMMAND=$(DPDK_CI_CONTAINERS_PYTHON3_CMD) $(MAKE_DOCKERFILE_SCRIPT)
+
+TEMPLATE_FILE_DIRECTORY=$(SCRIPT_DIRECTORY)/templates
+DOCKER_CONTAINER_TEMPLATE_DIR=$(TEMPLATE_FILE_DIRECTORY)/containers
+
+INVENTORY_FILE=$(SCRIPT_DIRECTORY)/inventory.yaml
+
+EXTRA_SCRIPTS_DIRECTORY=$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/scripts
+
+GIT_FETCH_ARGS=--all --tags
+
+CONTAINER_BUILDER_DOCKERFILE=$(CURDIR)/container_builder.dockerfile
+
+export
+############ End Internal Variables #############
+
+.PHONY: build push make_docker_files_in_container build_builder_container docker_deps extra_scripts libabigail dpdk clean_container_files clean
+
+build: make_docker_files_in_container extra_scripts
+ $(MAKE) -C $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) build_all
+
+push: make_docker_files_in_container extra_scripts
+ $(MAKE) -C $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) push_all
+
+make_docker_files_in_container: build_builder_container $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)
+ $(DPDK_CI_CONTAINER_BUILDER_PROGRAM) run -v $(CURDIR):/container_workspace -v $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY):/container_workspace/container_context \
+ -e DPDK_CI_CONTAINERS_ON_RHEL=$(DPDK_CI_CONTAINERS_ON_RHEL) \
+ -e DPDK_CI_CONTAINERS_BUILD_ABI=$(DPDK_CI_CONTAINERS_BUILD_ABI) \
+ -e DPDK_CI_CONTAINERS_FAIL_ON_UNBUILDABLE=$(DPDK_CI_CONTAINERS_FAIL_ON_UNBUILDABLE) \
+ -e DPDK_CI_CONTAINERS_REGISTRY_HOSTNAME='$(DPDK_CI_CONTAINERS_REGISTRY_HOSTNAME)' \
+ $(DPDK_CI_CONTAINERS_CONTAINER_BUILDER_TAG) make docker_deps
+
+build_builder_container:
+ $(DPDK_CI_CONTAINER_BUILDER_PROGRAM) build -f $(CONTAINER_BUILDER_DOCKERFILE) -t $(DPDK_CI_CONTAINERS_CONTAINER_BUILDER_TAG) $(CURDIR)
+
+docker_deps: $(DOCKERFILE) deps extra_scripts
+ chmod 666 $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)/*.dockerfile
+
+$(DOCKERFILE): $(INVENTORY_FILE) $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) deps $(MAKE_DOCKERFILE_SCRIPT) $(shell find $(DOCKER_CONTAINER_TEMPLATE_DIR) -type f)
+ cd $(SCRIPT_DIRECTORY) && $(MAKE_DOCKERFILE_COMMAND) $(SCRIPT_ARGS)
+
+deps: $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) dpdk libabigail
+
+extra_scripts: $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY) $(EXTRA_SCRIPTS_DIRECTORY) $(DPDK_CI_CONTAINERS_EXTRA_SCRIPTS_PATH)
+ifdef $(DPDK_CI_CONTAINERS_EXTRA_SCRIPTS_PATH)
+ cp -pur $(DPDK_CI_CONTAINERS_EXTRA_SCRIPTS_PATH) $(EXTRA_SCRIPTS_DIRECTORY)
+endif
+ mkdir -p $(EXTRA_SCRIPTS_DIRECTORY)
+
+# Clone libabigail source
+libabigail: $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)
+ git -C $(LIBABIGAIL_DIRECTORY) fetch $(GIT_FETCH_ARGS) || git clone $(DPDK_CI_CONTAINERS_LIBABIGAIL_CLONE_URL) $(LIBABIGAIL_DIRECTORY)
+ git -C $(LIBABIGAIL_DIRECTORY) describe --tags `git -C $(LIBABIGAIL_DIRECTORY) rev-list --tags --max-count=1` | xargs -n 1 git -C $(LIBABIGAIL_DIRECTORY) checkout
+
+# Clone DPDK source
+dpdk: $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)
+ git -C $(DPDK_DIRECTORY) fetch $(GIT_FETCH_ARGS) || git clone $(DPDK_CI_CONTAINERS_DPDK_CLONE_URL) $(DPDK_DIRECTORY)
+
+$(EXTRA_SCRIPTS_DIRECTORY):
+ mkdir -p $(EXTRA_SCRIPTS_DIRECTORY)
+
+$(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY):
+ mkdir -p $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)
+
+clean_container_files:
+ rm $(DOCKERFILE)
+
+clean:
+ rm -rf $(DPDK_CI_CONTAINERS_CONTEXT_DIRECTORY)
--
2.34.1
^ permalink raw reply [flat|nested] 12+ messages in thread* RE: [PATCH v2 0/6] Community Lab Container Definitions
2022-10-19 12:53 [PATCH v2 0/6] Community Lab Container Definitions ohilyard
` (5 preceding siblings ...)
2022-10-19 12:53 ` [PATCH v2 6/6] containers/Makefile: Makefile to automate builds ohilyard
@ 2022-10-19 14:31 ` Ali Alnubani
2022-10-19 14:55 ` Owen Hilyard
2022-10-20 8:25 ` Ali Alnubani
7 siblings, 1 reply; 12+ messages in thread
From: Ali Alnubani @ 2022-10-19 14:31 UTC (permalink / raw)
To: ohilyard, ci; +Cc: aconole
> -----Original Message-----
> From: ohilyard@iol.unh.edu <ohilyard@iol.unh.edu>
> Sent: Wednesday, October 19, 2022 3:53 PM
> To: ci@dpdk.org
> Cc: aconole@redhat.com; Ali Alnubani <alialnu@nvidia.com>; Owen Hilyard
> <ohilyard@iol.unh.edu>
> Subject: [PATCH v2 0/6] Community Lab Container Definitions
>
> From: Owen Hilyard <ohilyard@iol.unh.edu>
>
> This patch series contains a new version of the DPDK CI containers. The old
> version was tied very tightly to the Community Lab Infrastructure, so it was
> not suitable for general use. This version is designed to make adding new
> OSes or OS versions as easy as possible. The minimum functionality can easily
> be built on any system that can compile DPDK. It includes support for
> building containers for other non-native architectures (ex: arm containers
> on x86) and for baking ABI references into the images.
>
> The inventory file as added in this patch series defines what the community
> lab
> currently supports.
>
> If you want to build these yourself, don't try to do parallel Makefile builds
> on non-server hardware. Libabigail is built into the containers, and since it
> is not avaliable in all distros it is compiled from source for many targets.
> If embedding the abi is enabled (DPDK_CI_CONTAINERS_BUILD_ABI=Y), with
> the
> current settings, DPDK will be compiled twice for every target in the
> inventory file. This will become three times when DPDK main has ABI stability
> again. Due to how the containers are constructed, building on non-native
> architectures is especially expensive because DPDK is compiled with an
> emulated
> compiler in a qemu vm that only has one thread.
>
> Owen Hilyard (6):
> containers/docs: Add container builder start
> containers/inventory: Add inventory for container builder
> containers/builder: Dockerfile creation script
> containers/templates: Templates for Dockerfiles
> containers/container_builder: Container for python scripts
> containers/Makefile: Makefile to automate builds
>
Thanks for addressing my previous comments.
The project doesn't specify a minimum version for podman/buildah.
I'm using podman version 3.4.4 in Ubuntu 22.04 (installed from Ubuntu's official repos), and it seems to be missing support for mount=type=cache, causing the following errors when running make's build target:
199b42d26a291a4dcbb69bf64ddb1309b080ffa9aee12e4f6a6b533469": invalid mount type "cache"
make[1]: *** [Makefile:19: build_alpine_compile] Error 125
make[1]: Leaving directory '/root/dpdk-ci/containers/container_context'
make: *** [Makefile:103: build] Error 2
The support seems to have been added in Buildah v1.24.0 (see [1]), which is part of podman v4.0.0 (see [2]).
[1] https://github.com/containers/buildah/commit/fc69aa68c23b32df5ab73726dcee88bf1add72c6
[2] https://github.com/containers/podman/commit/4a4d86d40f9137144103147e7a0ba74fbf3aaca8
Can the --mount RUN arg be enabled only for podman versions newer than v4.0.0 inside a Jinja2 block maybe?
Or do you prefer to mention v4.0.0 as the minimum required version of podman in the documentation?
Thanks,
Ali
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH v2 0/6] Community Lab Container Definitions
2022-10-19 14:31 ` [PATCH v2 0/6] Community Lab Container Definitions Ali Alnubani
@ 2022-10-19 14:55 ` Owen Hilyard
0 siblings, 0 replies; 12+ messages in thread
From: Owen Hilyard @ 2022-10-19 14:55 UTC (permalink / raw)
To: Ali Alnubani; +Cc: ci, aconole
[-- Attachment #1: Type: text/plain, Size: 3534 bytes --]
On Wed, Oct 19, 2022 at 10:31 AM Ali Alnubani <alialnu@nvidia.com> wrote:
> > -----Original Message-----
> > From: ohilyard@iol.unh.edu <ohilyard@iol.unh.edu>
> > Sent: Wednesday, October 19, 2022 3:53 PM
> > To: ci@dpdk.org
> > Cc: aconole@redhat.com; Ali Alnubani <alialnu@nvidia.com>; Owen Hilyard
> > <ohilyard@iol.unh.edu>
> > Subject: [PATCH v2 0/6] Community Lab Container Definitions
> >
> > From: Owen Hilyard <ohilyard@iol.unh.edu>
> >
> > This patch series contains a new version of the DPDK CI containers. The
> old
> > version was tied very tightly to the Community Lab Infrastructure, so it
> was
> > not suitable for general use. This version is designed to make adding new
> > OSes or OS versions as easy as possible. The minimum functionality can
> easily
> > be built on any system that can compile DPDK. It includes support for
> > building containers for other non-native architectures (ex: arm
> containers
> > on x86) and for baking ABI references into the images.
> >
> > The inventory file as added in this patch series defines what the
> community
> > lab
> > currently supports.
> >
> > If you want to build these yourself, don't try to do parallel Makefile
> builds
> > on non-server hardware. Libabigail is built into the containers, and
> since it
> > is not avaliable in all distros it is compiled from source for many
> targets.
> > If embedding the abi is enabled (DPDK_CI_CONTAINERS_BUILD_ABI=Y), with
> > the
> > current settings, DPDK will be compiled twice for every target in the
> > inventory file. This will become three times when DPDK main has ABI
> stability
> > again. Due to how the containers are constructed, building on non-native
> > architectures is especially expensive because DPDK is compiled with an
> > emulated
> > compiler in a qemu vm that only has one thread.
> >
> > Owen Hilyard (6):
> > containers/docs: Add container builder start
> > containers/inventory: Add inventory for container builder
> > containers/builder: Dockerfile creation script
> > containers/templates: Templates for Dockerfiles
> > containers/container_builder: Container for python scripts
> > containers/Makefile: Makefile to automate builds
> >
>
> Thanks for addressing my previous comments.
>
> The project doesn't specify a minimum version for podman/buildah.
> I'm using podman version 3.4.4 in Ubuntu 22.04 (installed from Ubuntu's
> official repos), and it seems to be missing support for mount=type=cache,
> causing the following errors when running make's build target:
> 199b42d26a291a4dcbb69bf64ddb1309b080ffa9aee12e4f6a6b533469": invalid mount
> type "cache"
> make[1]: *** [Makefile:19: build_alpine_compile] Error 125
> make[1]: Leaving directory '/root/dpdk-ci/containers/container_context'
> make: *** [Makefile:103: build] Error 2
>
> The support seems to have been added in Buildah v1.24.0 (see [1]), which
> is part of podman v4.0.0 (see [2]).
>
> [1]
> https://github.com/containers/buildah/commit/fc69aa68c23b32df5ab73726dcee88bf1add72c6
> [2]
> https://github.com/containers/podman/commit/4a4d86d40f9137144103147e7a0ba74fbf3aaca8
>
> Can the --mount RUN arg be enabled only for podman versions newer than
> v4.0.0 inside a Jinja2 block maybe?
> Or do you prefer to mention v4.0.0 as the minimum required version of
> podman in the documentation?
>
> Thanks,
> Ali
>
I think v4.0.0 as the minimum version is better, since not using that cache
makes an already long build process much longer. If no one else has any
comments, I'll submit that as a v3 next week.
Owen
[-- Attachment #2: Type: text/html, Size: 4912 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [PATCH v2 0/6] Community Lab Container Definitions
2022-10-19 12:53 [PATCH v2 0/6] Community Lab Container Definitions ohilyard
` (6 preceding siblings ...)
2022-10-19 14:31 ` [PATCH v2 0/6] Community Lab Container Definitions Ali Alnubani
@ 2022-10-20 8:25 ` Ali Alnubani
7 siblings, 0 replies; 12+ messages in thread
From: Ali Alnubani @ 2022-10-20 8:25 UTC (permalink / raw)
To: ohilyard, ci; +Cc: aconole
> -----Original Message-----
> From: ohilyard@iol.unh.edu <ohilyard@iol.unh.edu>
> Sent: Wednesday, October 19, 2022 3:53 PM
> To: ci@dpdk.org
> Cc: aconole@redhat.com; Ali Alnubani <alialnu@nvidia.com>; Owen Hilyard
> <ohilyard@iol.unh.edu>
> Subject: [PATCH v2 0/6] Community Lab Container Definitions
>
> From: Owen Hilyard <ohilyard@iol.unh.edu>
>
> This patch series contains a new version of the DPDK CI containers. The old
> version was tied very tightly to the Community Lab Infrastructure, so it was
> not suitable for general use. This version is designed to make adding new
> OSes or OS versions as easy as possible. The minimum functionality can easily
> be built on any system that can compile DPDK. It includes support for
> building containers for other non-native architectures (ex: arm containers
> on x86) and for baking ABI references into the images.
>
> The inventory file as added in this patch series defines what the community
> lab
> currently supports.
>
> If you want to build these yourself, don't try to do parallel Makefile builds
> on non-server hardware. Libabigail is built into the containers, and since it
> is not avaliable in all distros it is compiled from source for many targets.
> If embedding the abi is enabled (DPDK_CI_CONTAINERS_BUILD_ABI=Y), with
> the
> current settings, DPDK will be compiled twice for every target in the
> inventory file. This will become three times when DPDK main has ABI stability
> again. Due to how the containers are constructed, building on non-native
> architectures is especially expensive because DPDK is compiled with an
> emulated
> compiler in a qemu vm that only has one thread.
>
> Owen Hilyard (6):
> containers/docs: Add container builder start
> containers/inventory: Add inventory for container builder
> containers/builder: Dockerfile creation script
> containers/templates: Templates for Dockerfiles
> containers/container_builder: Container for python scripts
> containers/Makefile: Makefile to automate builds
>
This is a great addition to the CI repo, thanks for the effort.
Tested with podman version 4.3.0.
Reviewed-by: Ali Alnubani <alialnu@nvidia.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
^ permalink raw reply [flat|nested] 12+ messages in thread