From: Marco Varlese <mvarlese@suse.de>
To: Yongseok Koh <yskoh@mellanox.com>, dpdk stable <stable@dpdk.org>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] 17.11.4 patches review and test (RC2)
Date: Mon, 27 Aug 2018 10:48:10 +0200 [thread overview]
Message-ID: <005d1773b4c43ff102578ae56e12ddcb8eafd514.camel@suse.de> (raw)
In-Reply-To: <20180825011818.29876-1-yskoh@mellanox.com>
Hi,
On Fri, 2018-08-24 at 18:18 -0700, Yongseok Koh wrote:
> Hi all,
>
> Here is a list of patches targeted for LTS release 17.11.4. Please help review
> and test. The planned date for the final release is Aug 30. Before that,
> please
> shout if anyone has objections with these patches being applied.
>
> Also for the companies committed to running regression tests, please run the
> tests and report any issue before the release date.
I retested -rc2 and things look good now.
>
> A release candidate tarball can be found at:
>
> https://dpdk.org/browse/dpdk-stable/tag/?id=v17.11.4-rc2
>
> These patches are located at branch 17.11 of dpdk-stable repo:
>
> https://dpdk.org/browse/dpdk-stable/
>
>
> Thanks,
> Yongseok
Cheers,
Marco
>
> ---
> Adrien Mazarguil (2):
> maintainers: update for Mellanox PMDs
> net/mlx4: fix minor resource leak during init
>
> Ajit Khaparde (7):
> net/bnxt: fix HW Tx checksum offload check
> net/bnxt: fix set MTU
> net/bnxt: fix Rx ring count limitation
> net/bnxt: fix memory leaks in NVM commands
> net/bnxt: fix lock release on NVM write failure
> net/bnxt: check access denied for HWRM commands
> net/bnxt: fix RETA size
>
> Alejandro Lucero (6):
> net/nfp: fix field initialization in Tx descriptor
> mem: add function for checking memsegs IOVAs addresses
> bus/pci: use IOVAs check when setting IOVA mode
> mem: use address hint for mapping hugepages
> net/nfp: check hugepages IOVAs based on DMA mask
> net/nfp: support IOVA VA mode
>
> Alok Makhariya (1):
> bus/dpaa: fix phandle support for Linux 4.16
>
> Anatoly Burakov (8):
> eal/linux: fix invalid syntax in interrupts
> eal/linux: fix uninitialized value
> test: fix EAL flags autotest on FreeBSD
> test: fix result printing
> test: fix code on report
> test: make autotest runner python 2/3 compliant
> test: print autotest categories
> test: improve filtering
>
> Andrew Rybchenko (3):
> net/sfc: cut non VLAN ID bits from TCI
> net/sfc: fix assert in set multicast address list
> net/sfc: handle unknown L3 packet class in EF10 event parser
>
> Andy Green (1):
> ring: fix sign conversion warning
>
> Beilei Xing (3):
> net/i40e: fix shifts of 32-bit value
> net/i40e: fix packet type parsing with DDP
> net/i40e: fix setting TPID with AQ command
>
> Bruce Richardson (2):
> examples/exception_path: fix out-of-bounds read
> mk: fix permissions when using make install
>
> Chas Williams (2):
> net/bonding: always update bonding link status
> net/bonding: do not clear active slave count
>
> Dan Gora (1):
> kni: fix crash with null name
>
> Daria Kolistratova (1):
> net/ena: fix SIGFPE with 0 Rx queue
>
> Dariusz Stojaczyk (1):
> eal: fix return codes on thread naming failure
>
> David Marchand (1):
> net/bnxt: add missing ids in xstats
>
> Drocula Lambda (1):
> kni: fix build on RHEL 7.5
>
> Ferruh Yigit (2):
> kni: fix build with gcc 8.1
> net/thunderx: fix build with gcc optimization on
>
> Fiona Trahe (1):
> crypto/qat: fix checks for 3GPP algo bit params
>
> Gavin Hu (3):
> mk: fix cross build
> net/dpaa2: remove loop for unused pool entries
> maintainers: claim maintainership for ARM v7 and v8
>
> Haiyue Wang (1):
> net/i40e: workaround performance degradation
>
> Harry van Haaren (1):
> event: fix ring init failure handling
>
> He Zhe (1):
> examples: fix strncpy error for GCC8
>
> Hemant Agrawal (2):
> test/crypto: fix device id when stopping port
> bus/dpaa: fix buffer offset setting in FMAN
>
> Hyong Youb Kim (2):
> net/enic: do not overwrite admin Tx queue limit
> net/enic: add devarg to specify ingress VLAN rewrite mode
>
> Ido Goshen (1):
> net/pcap: fix multiple queues
>
> Jananee Parthasarathy (1):
> mk: update targets for classified tests
>
> Jay Ding (1):
> net/bnxt: check for invalid vNIC id
>
> Jerin Jacob (2):
> ethdev: fix queue statistics mapping documentation
> eal: fix bitmap documentation
>
> Kiran Kumar (2):
> net/bonding: fix MAC address reset
> net/thunderx: avoid sq door bell write on zero packet
>
> Konstantin Ananyev (3):
> examples/ipsec-secgw: fix IPv4 checksum at Tx
> examples/ipsec-secgw: fix bypass rule processing
> app/testpmd: fix DCB config
>
> Matan Azrad (1):
> net/tap: fix zeroed flow mask configurations
>
> Maxime Coquelin (4):
> vhost: improve dirty pages logging performance
> vhost: fix missing increment of log cache count
> vhost: flush IOTLB cache on new mem table handling
> vhost: retranslate vring addr when memory table changes
>
> Moti Haimovsky (2):
> net/mlx5: fix build with old kernels
> net/mlx4: check RSS queues number limitation
>
> Nelio Laranjeiro (1):
> net/mlx5: fix TCI mask filter
>
> Nikhil Rao (5):
> eventdev: fix port in Rx adapter internal function
> eventdev: fix missing update to Rx adaper WRR position
> eventdev: add event buffer flush in Rx adapter
> eventdev: fix internal port logic in Rx adapter
> eventdev: fix Rx SW adapter stop
>
> Nithin Dabilpuram (1):
> app/testpmd: fix buffer leak in TM command
>
> Ophir Munk (1):
> net/mlx5: fix secondary process resource leakage
>
> Pablo de Lara (7):
> examples/l2fwd-crypto: fix digest with AEAD algo
> examples/l2fwd-crypto: check return value on IV size check
> examples/l2fwd-crypto: skip device not supporting operation
> test/hash: fix multiwriter with non consecutive cores
> test/hash: fix potential memory leak
> app/crypto-perf: fix auth IV offset
> hash: fix doxygen of return values
>
> Pavan Nikhilesh (2):
> event/octeontx: remove unnecessary port start and stop
> net/octeontx: fix stop clearing Rx/Tx functions
>
> Qi Zhang (1):
> vfio: fix PCI address comparison
>
> Radu Nicolau (3):
> security: fix crash on destroy null session
> test: fix uninitialized port configuration
> net/bonding: fix race condition
>
> Rafal Kozik (4):
> net/ena: fix GENMASK_ULL macro
> net/ena: set link speed as none
> net/ena: check pointer before memset
> net/ena: change memory type
>
> Rahul Lakkireddy (2):
> net/cxgbe: fix init failure due to new flash parts
> net/cxgbe: fix Rx channel map and queue type
>
> Rami Rosen (2):
> examples/l3fwd: remove useless include
> ethdev: fix a doxygen comment for port allocation
>
> Rasesh Mody (10):
> net/qede: fix VF MTU update
> net/qede: remove primary MAC removal
> net/qede: fix for devargs
> net/qede: fix default extended VLAN offload config
> doc: update qede management firmware guide
> net/qede/base: fix GRC attention callback
> net/bnx2x: fix FW command timeout during stop
> net/bnx2x: fix poll link status
> net/qede/base: fix to clear HW indication
> net/bnx2x: fix to set device link status
>
> Remy Horton (4):
> bitrate: add sanity check on parameters
> metrics: add check for invalid key
> metrics: do not fail silently when uninitialised
> metrics: disallow null as metric name
>
> Reshma Pattan (2):
> test/flow_classify: fix return types
> mk: remove unnecessary test rules
>
> Rosen Xu (1):
> examples/flow_filtering: add flow director config for i40e
>
> Shahaf Shuler (1):
> net/mlx5: fix compilation for rdma-core v19
>
> Shahed Shaikh (7):
> net/qede: fix link change event notification
> net/qede: fix legacy interrupt mode
> net/qede: fix incorrect link status update
> net/qede: fix unicast MAC address handling in VF
> net/qede: fix interrupt handler unregister
> net/qede: fix MAC address removal failure message
> net/qede: fix ntuple filter configuration
>
> Shreyansh Jain (1):
> doc: fix bonding command in testpmd
>
> Somnath Kotur (3):
> net/bnxt: fix to move a flow to a different queue
> net/bnxt: use correct flags during VLAN configuration
> net/bnxt: fix filter freeing
>
> Thomas Monjalon (1):
> bus/dpaa: fix build
>
> Tiwei Bie (1):
> vhost: release locks on RARP packet failure
>
> Tomasz Duszynski (1):
> net/mvpp2: check pointer before using it
>
> Wei Zhao (7):
> net/ixgbe: add support for VLAN in IP mode FDIR
> net/ixgbe: fix tunnel id format error for FDIR
> net/ixgbe: fix tunnel type set error for FDIR
> net/ixgbe: fix mask bits register set error for FDIR
> app/testpmd: fix VLAN TCI mask set error for FDIR
> net/i40e: fix check of flow director programming status
> net/i40e: revert fix of flow director check
>
> Xiaoyun Li (1):
> net/i40e: fix link speed
>
> Xueming Li (1):
> net/mlx5: fix crash in device probe
>
> Yipeng Wang (3):
> hash: fix multiwriter lock memory allocation
> hash: fix a multi-writer race condition
> hash: fix key slot size accuracy
>
> Yongseok Koh (9):
> net/mlx5: fix Rx buffer replenishment threshold
> net/mlx5: add missing sanity checks for Tx completion queue
> net/mlx5: fix assert for Tx completion queue count
> net/mlx5: fix queue rollback when starting device
> net/mlx5: fix error number handling
> net/mlx5: preserve promiscuous flag for flow isolation mode
> net/mlx5: preserve allmulticast flag for flow isolation mode
> net/mlx5: fix return value when deleting fdir filter
next prev parent reply other threads:[~2018-08-27 8:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-25 1:18 Yongseok Koh
2018-08-27 8:48 ` Marco Varlese [this message]
2018-08-30 9:53 ` Raslan Darawsheh
2018-08-30 20:12 ` Yongseok Koh
2018-08-31 1:38 ` Yongseok Koh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=005d1773b4c43ff102578ae56e12ddcb8eafd514.camel@suse.de \
--to=mvarlese@suse.de \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
--cc=yskoh@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).