From: "Jiawen Wu" <jiawenwu@trustnetic.com>
To: "'Andrew Rybchenko'" <andrew.rybchenko@oktetlabs.ru>, <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v6 10/19] net/ngbe: support link update
Date: Mon, 5 Jul 2021 15:10:30 +0800 [thread overview]
Message-ID: <00a701d7716c$d705b0c0$85111240$@trustnetic.com> (raw)
In-Reply-To: <52460389-4422-31c8-76fa-0a8790aa033d@oktetlabs.ru>
On July 3, 2021 12:24 AM, Andrew Rybchenko wrote:
> On 6/17/21 1:59 PM, Jiawen Wu wrote:
> > Register to handle device interrupt.
> >
> > Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
>
> [snip]
>
> > diff --git a/doc/guides/nics/ngbe.rst b/doc/guides/nics/ngbe.rst index
> > 54d0665db9..0918cc2918 100644
> > --- a/doc/guides/nics/ngbe.rst
> > +++ b/doc/guides/nics/ngbe.rst
> > @@ -8,6 +8,11 @@ The NGBE PMD (librte_pmd_ngbe) provides poll mode
> > driver support for Wangxun 1 Gigabit Ethernet NICs.
> >
> >
> > +Features
> > +--------
> > +
> > +- Link state information
> > +
>
> Two empty lines before the section.
>
> > Prerequisites
> > -------------
> >
>
> [snip]
>
> > diff --git a/drivers/net/ngbe/ngbe_ethdev.c
> > b/drivers/net/ngbe/ngbe_ethdev.c index deca64137d..c952023e8b 100644
> > --- a/drivers/net/ngbe/ngbe_ethdev.c
> > +++ b/drivers/net/ngbe/ngbe_ethdev.c
> > @@ -141,6 +175,23 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev,
> void *init_params __rte_unused)
> > return -ENOMEM;
> > }
> >
> > + ctrl_ext = rd32(hw, NGBE_PORTCTL);
> > + /* let hardware know driver is loaded */
> > + ctrl_ext |= NGBE_PORTCTL_DRVLOAD;
> > + /* Set PF Reset Done bit so PF/VF Mail Ops can work */
> > + ctrl_ext |= NGBE_PORTCTL_RSTDONE;
> > + wr32(hw, NGBE_PORTCTL, ctrl_ext);
> > + ngbe_flush(hw);
> > +
> > + rte_intr_callback_register(intr_handle,
> > + ngbe_dev_interrupt_handler, eth_dev);
> > +
> > + /* enable uio/vfio intr/eventfd mapping */
> > + rte_intr_enable(intr_handle);
> > +
> > + /* enable support intr */
> > + ngbe_enable_intr(eth_dev);
> > +
>
> I don't understand why it is done unconditionally regardless of the
> corresponding bit in dev_conf.
Sorry...I don't quite understand what you mean.
>
> > return 0;
> > }
> >
next prev parent reply other threads:[~2021-07-05 7:10 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-17 10:59 [dpdk-dev] [PATCH v6 00/19] net: ngbe PMD Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 01/19] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-07-02 13:07 ` Andrew Rybchenko
2021-07-05 2:52 ` Jiawen Wu
2021-07-05 8:54 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 02/19] net/ngbe: support probe and remove Jiawen Wu
2021-07-02 13:22 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 03/19] net/ngbe: add log type and error type Jiawen Wu
2021-07-02 13:22 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 04/19] net/ngbe: define registers Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 05/19] net/ngbe: set MAC type and LAN ID with device initialization Jiawen Wu
2021-07-02 16:05 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 06/19] net/ngbe: init and validate EEPROM Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 07/19] net/ngbe: add HW initialization Jiawen Wu
2021-07-02 16:08 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 08/19] net/ngbe: identify PHY and reset PHY Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 09/19] net/ngbe: store MAC address Jiawen Wu
2021-07-02 16:12 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 10/19] net/ngbe: support link update Jiawen Wu
2021-07-02 16:24 ` Andrew Rybchenko
2021-07-05 7:10 ` Jiawen Wu [this message]
2021-07-05 8:58 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 11/19] net/ngbe: setup the check PHY link Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 12/19] net/ngbe: add Rx queue setup and release Jiawen Wu
2021-07-02 16:35 ` Andrew Rybchenko
2021-07-05 8:36 ` Jiawen Wu
2021-07-05 9:08 ` Andrew Rybchenko
2021-07-06 7:53 ` Jiawen Wu
2021-07-06 8:06 ` Andrew Rybchenko
2021-07-06 8:33 ` Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 13/19] net/ngbe: add Tx " Jiawen Wu
2021-07-02 16:39 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 14/19] net/ngbe: add simple Rx flow Jiawen Wu
2021-07-02 16:42 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 15/19] net/ngbe: add simple Tx flow Jiawen Wu
2021-07-02 16:45 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 16/19] net/ngbe: add device start and stop operations Jiawen Wu
2021-07-02 16:52 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 17/19] net/ngbe: add Tx queue start and stop Jiawen Wu
2021-07-02 16:55 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 18/19] net/ngbe: add Rx " Jiawen Wu
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 19/19] net/ngbe: support to close and reset device Jiawen Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00a701d7716c$d705b0c0$85111240$@trustnetic.com' \
--to=jiawenwu@trustnetic.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).