[dpdk-dev] [PATCH 0/2] add symmetric toeplitz hash support

[dpdk-dev] [PATCH 0/2] add symmetric toeplitz hash support

[simei]

From: Simei Su <simei.su@intel.com>

[PATCH 1/2] ethdev: add new hash function "Symmetric Toeplitz" supported by hardware.
[PATCH 2/2] app/testpmd: add command line support for symmetric toeplitz hash configuration.

Simei Su (2):
  ethdev: add symmetric toeplitz hash support
  app/testpmd: add symmetric toeplitz hash support

 app/test-pmd/cmdline.c                      | 12 +++++++++---
 app/test-pmd/cmdline_flow.c                 | 12 +++++++++++-
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  2 +-
 lib/librte_ethdev/rte_flow.h                |  1 +
 4 files changed, 22 insertions(+), 5 deletions(-)

-- 
1.8.3.1

[dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash support

[simei]

From: Simei Su <simei.su@intel.com>

Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash funtion.
To support symmetric hash by rte_flow RSS action, this patch adds
new hash function "Symmetric Toeplitz" which is supported by some hardware.

Signed-off-by: Simei Su <simei.su@intel.com>
---
 lib/librte_ethdev/rte_flow.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index f3a8fb1..2a0e6d5 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -1744,6 +1744,7 @@ enum rte_eth_hash_function {
 	RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
 	RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
 	RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
+	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ, /**< Symmetric Toeplitz */
 	RTE_ETH_HASH_FUNCTION_MAX,
 };
 
-- 
1.8.3.1

Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash support

[Andrew Rybchenko]

On 7/25/19 7:57 AM, simei wrote:
> From: Simei Su <simei.su@intel.com>
> 
> Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash funtion.
> To support symmetric hash by rte_flow RSS action, this patch adds
> new hash function "Symmetric Toeplitz" which is supported by some hardware.

Isn't it a question of key to achieve symmetry?
I.e. hash algorithm (function) is still the same - Toeplitz, but
hash key makes the result symmetric (i.e. equal for flows in both
directions - swap transport ports and IPv4/6 addresses).

> Signed-off-by: Simei Su <simei.su@intel.com>
> ---
>   lib/librte_ethdev/rte_flow.h | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> index f3a8fb1..2a0e6d5 100644
> --- a/lib/librte_ethdev/rte_flow.h
> +++ b/lib/librte_ethdev/rte_flow.h
> @@ -1744,6 +1744,7 @@ enum rte_eth_hash_function {
>   	RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
>   	RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
>   	RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
> +	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ, /**< Symmetric Toeplitz */
>   	RTE_ETH_HASH_FUNCTION_MAX,
>   };
>   
> 

Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash support

[Adrien Mazarguil]

On Wed, Jul 31, 2019 at 03:08:19PM +0300, Andrew Rybchenko wrote:
> On 7/25/19 7:57 AM, simei wrote:
> > From: Simei Su <simei.su@intel.com>
> > 
> > Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash funtion.
> > To support symmetric hash by rte_flow RSS action, this patch adds
> > new hash function "Symmetric Toeplitz" which is supported by some hardware.
> 
> Isn't it a question of key to achieve symmetry?
> I.e. hash algorithm (function) is still the same - Toeplitz, but
> hash key makes the result symmetric (i.e. equal for flows in both
> directions - swap transport ports and IPv4/6 addresses).

This is only an option when src/dst are known in advance.

When doing RSS, HW implementations (such as Mellanox's) implement a modified
Toeplitz XOR'ing src with dst resulting in the same hash both ways
regardless of the key.

-- 
Adrien Mazarguil
6WIND

Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash support

[Andrew Rybchenko]

On 7/31/19 3:30 PM, Adrien Mazarguil wrote:
> On Wed, Jul 31, 2019 at 03:08:19PM +0300, Andrew Rybchenko wrote:
>> On 7/25/19 7:57 AM, simei wrote:
>>> From: Simei Su <simei.su@intel.com>
>>>
>>> Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash funtion.
>>> To support symmetric hash by rte_flow RSS action, this patch adds
>>> new hash function "Symmetric Toeplitz" which is supported by some hardware.
>> Isn't it a question of key to achieve symmetry?
>> I.e. hash algorithm (function) is still the same - Toeplitz, but
>> hash key makes the result symmetric (i.e. equal for flows in both
>> directions - swap transport ports and IPv4/6 addresses).
> This is only an option when src/dst are known in advance.
>
> When doing RSS, HW implementations (such as Mellanox's) implement a modified
> Toeplitz XOR'ing src with dst resulting in the same hash both ways
> regardless of the key.

OK, I see. But generic symmetric Toeplitz is introduced by the patch.
What is criteria for other vendor to say that it is supported?
What should application expect?
The algorithm should be defined.

Also interesting question is how does it co-exists with the other
patch in the mailing list which introduces way to use source or
destination IP/port only.

Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash support

[Shahaf Shuler]

Wednesday, July 31, 2019 3:31 PM, Adrien Mazarguil:
> Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash
> support
> 
> On Wed, Jul 31, 2019 at 03:08:19PM +0300, Andrew Rybchenko wrote:
> > On 7/25/19 7:57 AM, simei wrote:
> > > From: Simei Su <simei.su@intel.com>
> > >
> > > Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash funtion.
> > > To support symmetric hash by rte_flow RSS action, this patch adds
> > > new hash function "Symmetric Toeplitz" which is supported by some
> hardware.
> >
> > Isn't it a question of key to achieve symmetry?
> > I.e. hash algorithm (function) is still the same - Toeplitz, but hash
> > key makes the result symmetric (i.e. equal for flows in both
> > directions - swap transport ports and IPv4/6 addresses).
> 
> This is only an option when src/dst are known in advance.
> 
> When doing RSS, HW implementations (such as Mellanox's) implement a
> modified Toeplitz XOR'ing src with dst resulting in the same hash both ways
> regardless of the key.

Just to stand correct it was a bug on Mellanox kernel driver that was fixed. Now the RSS is spec complaint (non-symmetric). 
Andrew is correct one can have a special key that will make the RSS symmetric, however it is good to have this option for the user to explicitly request symmetric function (w/o any restriction on the key).

> 
> --
> Adrien Mazarguil
> 6WIND

Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash support

[Andrew Rybchenko]

On 7/31/19 4:43 PM, Shahaf Shuler wrote:
> Wednesday, July 31, 2019 3:31 PM, Adrien Mazarguil:
>> Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash
>> support
>>
>> On Wed, Jul 31, 2019 at 03:08:19PM +0300, Andrew Rybchenko wrote:
>>> On 7/25/19 7:57 AM, simei wrote:
>>>> From: Simei Su <simei.su@intel.com>
>>>>
>>>> Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash funtion.
>>>> To support symmetric hash by rte_flow RSS action, this patch adds
>>>> new hash function "Symmetric Toeplitz" which is supported by some
>> hardware.
>>> Isn't it a question of key to achieve symmetry?
>>> I.e. hash algorithm (function) is still the same - Toeplitz, but hash
>>> key makes the result symmetric (i.e. equal for flows in both
>>> directions - swap transport ports and IPv4/6 addresses).
>> This is only an option when src/dst are known in advance.
>>
>> When doing RSS, HW implementations (such as Mellanox's) implement a
>> modified Toeplitz XOR'ing src with dst resulting in the same hash both ways
>> regardless of the key.
> Just to stand correct it was a bug on Mellanox kernel driver that was fixed. Now the RSS is spec complaint (non-symmetric).
> Andrew is correct one can have a special key that will make the RSS symmetric, however it is good to have this option for the user to explicitly request symmetric function (w/o any restriction on the key).

I think we need a definition what is behind SYMMETRIC_TOEPLITZ here.
If I'd like to test it and check, I need to know an algorithm in order
to know what to expect.
Also it is important to make it the same for all NIC vendors: what
should algorithm be in order to say that it is symmetric Toeplitz?

Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash support

[Su, Simei]

Hi, Andrew

> -----Original Message-----
> From: Andrew Rybchenko [mailto:arybchenko@solarflare.com]
> Sent: Sunday, September 29, 2019 7:51 PM
> To: Shahaf Shuler <shahafs@mellanox.com>; Adrien Mazarguil
> <adrien.mazarguil@6wind.com>
> Cc: Su, Simei <simei.su@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com>; Wu,
> Jingjing <jingjing.wu@intel.com>; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash
> support
> 
> On 7/31/19 4:43 PM, Shahaf Shuler wrote:
> > Wednesday, July 31, 2019 3:31 PM, Adrien Mazarguil:
> >> Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz
> >> hash support
> >>
> >> On Wed, Jul 31, 2019 at 03:08:19PM +0300, Andrew Rybchenko wrote:
> >>> On 7/25/19 7:57 AM, simei wrote:
> >>>> From: Simei Su <simei.su@intel.com>
> >>>>
> >>>> Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash funtion.
> >>>> To support symmetric hash by rte_flow RSS action, this patch adds
> >>>> new hash function "Symmetric Toeplitz" which is supported by some
> >> hardware.
> >>> Isn't it a question of key to achieve symmetry?
> >>> I.e. hash algorithm (function) is still the same - Toeplitz, but
> >>> hash key makes the result symmetric (i.e. equal for flows in both
> >>> directions - swap transport ports and IPv4/6 addresses).
> >> This is only an option when src/dst are known in advance.
> >>
> >> When doing RSS, HW implementations (such as Mellanox's) implement a
> >> modified Toeplitz XOR'ing src with dst resulting in the same hash
> >> both ways regardless of the key.
> > Just to stand correct it was a bug on Mellanox kernel driver that was fixed. Now
> the RSS is spec complaint (non-symmetric).
> > Andrew is correct one can have a special key that will make the RSS symmetric,
> however it is good to have this option for the user to explicitly request symmetric
> function (w/o any restriction on the key).
> 
> I think we need a definition what is behind SYMMETRIC_TOEPLITZ here.
> If I'd like to test it and check, I need to know an algorithm in order to know what
> to expect.
> Also it is important to make it the same for all NIC vendors: what should
> algorithm be in order to say that it is symmetric Toeplitz?

The symmetric toeplitz is: src, dst will be replaced by xor(src, dst).
It is expected to get the same hash value when swapping src/dst ip or port.

Br
Simei

Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash support

[Andrew Rybchenko]

Hi Simei,

On 9/30/19 6:12 AM, Su, Simei wrote:
> Hi, Andrew
>
>> -----Original Message-----
>> From: Andrew Rybchenko [mailto:arybchenko@solarflare.com]
>> Sent: Sunday, September 29, 2019 7:51 PM
>> To: Shahaf Shuler <shahafs@mellanox.com>; Adrien Mazarguil
>> <adrien.mazarguil@6wind.com>
>> Cc: Su, Simei <simei.su@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com>; Wu,
>> Jingjing <jingjing.wu@intel.com>; dev@dpdk.org
>> Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash
>> support
>>
>> On 7/31/19 4:43 PM, Shahaf Shuler wrote:
>>> Wednesday, July 31, 2019 3:31 PM, Adrien Mazarguil:
>>>> Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz
>>>> hash support
>>>>
>>>> On Wed, Jul 31, 2019 at 03:08:19PM +0300, Andrew Rybchenko wrote:
>>>>> On 7/25/19 7:57 AM, simei wrote:
>>>>>> From: Simei Su <simei.su@intel.com>
>>>>>>
>>>>>> Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash funtion.
>>>>>> To support symmetric hash by rte_flow RSS action, this patch adds
>>>>>> new hash function "Symmetric Toeplitz" which is supported by some
>>>> hardware.
>>>>> Isn't it a question of key to achieve symmetry?
>>>>> I.e. hash algorithm (function) is still the same - Toeplitz, but
>>>>> hash key makes the result symmetric (i.e. equal for flows in both
>>>>> directions - swap transport ports and IPv4/6 addresses).
>>>> This is only an option when src/dst are known in advance.
>>>>
>>>> When doing RSS, HW implementations (such as Mellanox's) implement a
>>>> modified Toeplitz XOR'ing src with dst resulting in the same hash
>>>> both ways regardless of the key.
>>> Just to stand correct it was a bug on Mellanox kernel driver that was fixed. Now
>> the RSS is spec complaint (non-symmetric).
>>> Andrew is correct one can have a special key that will make the RSS symmetric,
>> however it is good to have this option for the user to explicitly request symmetric
>> function (w/o any restriction on the key).
>>
>> I think we need a definition what is behind SYMMETRIC_TOEPLITZ here.
>> If I'd like to test it and check, I need to know an algorithm in order to know what
>> to expect.
>> Also it is important to make it the same for all NIC vendors: what should
>> algorithm be in order to say that it is symmetric Toeplitz?
> The symmetric toeplitz is: src, dst will be replaced by xor(src, dst).
> It is expected to get the same hash value when swapping src/dst ip or port.

Are both replaced by XOR or just one is replaced by XOR and another one
removed from Toeplitz input? If later, how does it coexist with src/dst only
flags?

Anyway, please, add it to the patch in Doxygen comments.

Thanks,
Andrew.

Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash support

[Su, Simei]

Hi, Andrew

> -----Original Message-----
> From: Andrew Rybchenko [mailto:arybchenko@solarflare.com]
> Sent: Monday, September 30, 2019 2:15 PM
> To: Su, Simei <simei.su@intel.com>; Shahaf Shuler <shahafs@mellanox.com>;
> Adrien Mazarguil <adrien.mazarguil@6wind.com>
> Cc: Zhang, Qi Z <qi.z.zhang@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>;
> dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash
> support
> 
> Hi Simei,
> 
> On 9/30/19 6:12 AM, Su, Simei wrote:
> > Hi, Andrew
> >
> >> -----Original Message-----
> >> From: Andrew Rybchenko [mailto:arybchenko@solarflare.com]
> >> Sent: Sunday, September 29, 2019 7:51 PM
> >> To: Shahaf Shuler <shahafs@mellanox.com>; Adrien Mazarguil
> >> <adrien.mazarguil@6wind.com>
> >> Cc: Su, Simei <simei.su@intel.com>; Zhang, Qi Z
> >> <qi.z.zhang@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>;
> >> dev@dpdk.org
> >> Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz
> >> hash support
> >>
> >> On 7/31/19 4:43 PM, Shahaf Shuler wrote:
> >>> Wednesday, July 31, 2019 3:31 PM, Adrien Mazarguil:
> >>>> Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz
> >>>> hash support
> >>>>
> >>>> On Wed, Jul 31, 2019 at 03:08:19PM +0300, Andrew Rybchenko wrote:
> >>>>> On 7/25/19 7:57 AM, simei wrote:
> >>>>>> From: Simei Su <simei.su@intel.com>
> >>>>>>
> >>>>>> Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash funtion.
> >>>>>> To support symmetric hash by rte_flow RSS action, this patch adds
> >>>>>> new hash function "Symmetric Toeplitz" which is supported by some
> >>>> hardware.
> >>>>> Isn't it a question of key to achieve symmetry?
> >>>>> I.e. hash algorithm (function) is still the same - Toeplitz, but
> >>>>> hash key makes the result symmetric (i.e. equal for flows in both
> >>>>> directions - swap transport ports and IPv4/6 addresses).
> >>>> This is only an option when src/dst are known in advance.
> >>>>
> >>>> When doing RSS, HW implementations (such as Mellanox's) implement a
> >>>> modified Toeplitz XOR'ing src with dst resulting in the same hash
> >>>> both ways regardless of the key.
> >>> Just to stand correct it was a bug on Mellanox kernel driver that
> >>> was fixed. Now
> >> the RSS is spec complaint (non-symmetric).
> >>> Andrew is correct one can have a special key that will make the RSS
> >>> symmetric,
> >> however it is good to have this option for the user to explicitly
> >> request symmetric function (w/o any restriction on the key).
> >>
> >> I think we need a definition what is behind SYMMETRIC_TOEPLITZ here.
> >> If I'd like to test it and check, I need to know an algorithm in
> >> order to know what to expect.
> >> Also it is important to make it the same for all NIC vendors: what
> >> should algorithm be in order to say that it is symmetric Toeplitz?
> > The symmetric toeplitz is: src, dst will be replaced by xor(src, dst).
> > It is expected to get the same hash value when swapping src/dst ip or port.
> 
> Are both replaced by XOR or just one is replaced by XOR and another one
> removed from Toeplitz input? If later, how does it coexist with src/dst only flags?
> 
> Anyway, please, add it to the patch in Doxygen comments.
> 
  In our case, src and dst are both replaced by XOR. For example, src ip and dst ip or src port and dst port are swapped, the hash value is the same.
  SRC/DST only flags is another thing, it covers input set change.

Br
Simei

> Thanks,
> Andrew.

Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash support

[Zhang, Qi Z]

> -----Original Message-----
> From: Su, Simei
> Sent: Monday, September 30, 2019 2:34 PM
> To: Andrew Rybchenko <arybchenko@solarflare.com>; Shahaf Shuler
> <shahafs@mellanox.com>; Adrien Mazarguil <adrien.mazarguil@6wind.com>
> Cc: Zhang, Qi Z <qi.z.zhang@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>;
> dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz hash
> support
> 
> Hi, Andrew
> 
> > -----Original Message-----
> > From: Andrew Rybchenko [mailto:arybchenko@solarflare.com]
> > Sent: Monday, September 30, 2019 2:15 PM
> > To: Su, Simei <simei.su@intel.com>; Shahaf Shuler
> > <shahafs@mellanox.com>; Adrien Mazarguil <adrien.mazarguil@6wind.com>
> > Cc: Zhang, Qi Z <qi.z.zhang@intel.com>; Wu, Jingjing
> > <jingjing.wu@intel.com>; dev@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz
> > hash support
> >
> > Hi Simei,
> >
> > On 9/30/19 6:12 AM, Su, Simei wrote:
> > > Hi, Andrew
> > >
> > >> -----Original Message-----
> > >> From: Andrew Rybchenko [mailto:arybchenko@solarflare.com]
> > >> Sent: Sunday, September 29, 2019 7:51 PM
> > >> To: Shahaf Shuler <shahafs@mellanox.com>; Adrien Mazarguil
> > >> <adrien.mazarguil@6wind.com>
> > >> Cc: Su, Simei <simei.su@intel.com>; Zhang, Qi Z
> > >> <qi.z.zhang@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>;
> > >> dev@dpdk.org
> > >> Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric toeplitz
> > >> hash support
> > >>
> > >> On 7/31/19 4:43 PM, Shahaf Shuler wrote:
> > >>> Wednesday, July 31, 2019 3:31 PM, Adrien Mazarguil:
> > >>>> Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add symmetric
> > >>>> toeplitz hash support
> > >>>>
> > >>>> On Wed, Jul 31, 2019 at 03:08:19PM +0300, Andrew Rybchenko wrote:
> > >>>>> On 7/25/19 7:57 AM, simei wrote:
> > >>>>>> From: Simei Su <simei.su@intel.com>
> > >>>>>>
> > >>>>>> Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash
> funtion.
> > >>>>>> To support symmetric hash by rte_flow RSS action, this patch
> > >>>>>> adds new hash function "Symmetric Toeplitz" which is supported
> > >>>>>> by some
> > >>>> hardware.
> > >>>>> Isn't it a question of key to achieve symmetry?
> > >>>>> I.e. hash algorithm (function) is still the same - Toeplitz, but
> > >>>>> hash key makes the result symmetric (i.e. equal for flows in
> > >>>>> both directions - swap transport ports and IPv4/6 addresses).
> > >>>> This is only an option when src/dst are known in advance.
> > >>>>
> > >>>> When doing RSS, HW implementations (such as Mellanox's) implement
> > >>>> a modified Toeplitz XOR'ing src with dst resulting in the same
> > >>>> hash both ways regardless of the key.
> > >>> Just to stand correct it was a bug on Mellanox kernel driver that
> > >>> was fixed. Now
> > >> the RSS is spec complaint (non-symmetric).
> > >>> Andrew is correct one can have a special key that will make the
> > >>> RSS symmetric,
> > >> however it is good to have this option for the user to explicitly
> > >> request symmetric function (w/o any restriction on the key).
> > >>
> > >> I think we need a definition what is behind SYMMETRIC_TOEPLITZ here.
> > >> If I'd like to test it and check, I need to know an algorithm in
> > >> order to know what to expect.
> > >> Also it is important to make it the same for all NIC vendors: what
> > >> should algorithm be in order to say that it is symmetric Toeplitz?
> > > The symmetric toeplitz is: src, dst will be replaced by xor(src, dst).
> > > It is expected to get the same hash value when swapping src/dst ip or port.
> >
> > Are both replaced by XOR or just one is replaced by XOR and another
> > one removed from Toeplitz input? If later, how does it coexist with src/dst
> only flags?
> >
> > Anyway, please, add it to the patch in Doxygen comments.
> >
>   In our case, src and dst are both replaced by XOR. For example, src ip and
> dst ip or src port and dst port are swapped, the hash value is the same.
>   SRC/DST only flags is another thing, it covers input set change.

For the case with dst / src only, src or dst address will XOR with zero pair, so it result same value as simple Toeplitz

> 
> Br
> Simei
> 
> > Thanks,
> > Andrew.

[dpdk-dev] [PATCH 2/2] app/testpmd: add symmetric toeplitz hash support

[simei]

From: Simei Su <simei.su@intel.com>

This patch adds command line support for Symmetric Toeplitz
hash configuration.

Signed-off-by: Simei Su <simei.su@intel.com>
---
 app/test-pmd/cmdline.c                      | 12 +++++++++---
 app/test-pmd/cmdline_flow.c                 | 12 +++++++++++-
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  2 +-
 3 files changed, 21 insertions(+), 5 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index e7c4bee..29babe1 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -1078,7 +1078,7 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"get_hash_global_config (port_id)\n"
 			"    Get the global configurations of hash filters.\n\n"
 
-			"set_hash_global_config (port_id) (toeplitz|simple_xor|default)"
+			"set_hash_global_config (port_id) (toeplitz|simple_xor|symmetric_toeplitz|default)"
 			" (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|"
 			"ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload)"
 			" (enable|disable)\n"
@@ -12131,6 +12131,9 @@ struct cmd_get_hash_global_config_result {
 	case RTE_ETH_HASH_FUNCTION_SIMPLE_XOR:
 		printf("Hash function is Simple XOR\n");
 		break;
+	case RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ:
+		printf("Hash function is Symmetric Toeplitz\n");
+		break;
 	default:
 		printf("Unknown hash function\n");
 		break;
@@ -12204,6 +12207,9 @@ struct cmd_set_hash_global_config_result {
 	else if (!strcmp(res->hash_func, "simple_xor"))
 		info.info.global_conf.hash_func =
 			RTE_ETH_HASH_FUNCTION_SIMPLE_XOR;
+	else if	(!strcmp(res->hash_func, "symmetric_toeplitz"))
+		info.info.global_conf.hash_func =
+			RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ;
 	else if (!strcmp(res->hash_func, "default"))
 		info.info.global_conf.hash_func =
 			RTE_ETH_HASH_FUNCTION_DEFAULT;
@@ -12233,7 +12239,7 @@ struct cmd_set_hash_global_config_result {
 		port_id, UINT16);
 cmdline_parse_token_string_t cmd_set_hash_global_config_hash_func =
 	TOKEN_STRING_INITIALIZER(struct cmd_set_hash_global_config_result,
-		hash_func, "toeplitz#simple_xor#default");
+		hash_func, "toeplitz#simple_xor#symmetric_toeplitz#default");
 cmdline_parse_token_string_t cmd_set_hash_global_config_flow_type =
 	TOKEN_STRING_INITIALIZER(struct cmd_set_hash_global_config_result,
 		flow_type,
@@ -12247,7 +12253,7 @@ struct cmd_set_hash_global_config_result {
 	.f = cmd_set_hash_global_config_parsed,
 	.data = NULL,
 	.help_str = "set_hash_global_config <port_id> "
-		"toeplitz|simple_xor|default "
+		"toeplitz|simple_xor|symmetric_toeplitz|default "
 		"ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|"
 		"ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|"
 		"l2_payload enable|disable",
diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 201bd9d..9f1dc46 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -205,6 +205,7 @@ enum index {
 	ACTION_RSS_FUNC_DEFAULT,
 	ACTION_RSS_FUNC_TOEPLITZ,
 	ACTION_RSS_FUNC_SIMPLE_XOR,
+	ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ,
 	ACTION_RSS_TYPES,
 	ACTION_RSS_TYPE,
 	ACTION_RSS_KEY,
@@ -2276,7 +2277,8 @@ static int comp_vc_action_rss_queue(struct context *, const struct token *,
 		.next = NEXT(action_rss,
 			     NEXT_ENTRY(ACTION_RSS_FUNC_DEFAULT,
 					ACTION_RSS_FUNC_TOEPLITZ,
-					ACTION_RSS_FUNC_SIMPLE_XOR)),
+					ACTION_RSS_FUNC_SIMPLE_XOR,
+					ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ)),
 	},
 	[ACTION_RSS_FUNC_DEFAULT] = {
 		.name = "default",
@@ -2293,6 +2295,11 @@ static int comp_vc_action_rss_queue(struct context *, const struct token *,
 		.help = "simple XOR hash function",
 		.call = parse_vc_action_rss_func,
 	},
+	[ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ] = {
+		.name = "symmetric_toeplitz",
+		.help = "Symmetric Toeplitz hash function",
+		.call = parse_vc_action_rss_func,
+	},
 	[ACTION_RSS_LEVEL] = {
 		.name = "level",
 		.help = "encapsulation level for \"types\"",
@@ -3312,6 +3319,9 @@ static int comp_vc_action_rss_queue(struct context *, const struct token *,
 	case ACTION_RSS_FUNC_SIMPLE_XOR:
 		func = RTE_ETH_HASH_FUNCTION_SIMPLE_XOR;
 		break;
+	case ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ:
+		func = RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ;
+		break;
 	default:
 		return -1;
 	}
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index cb83a3c..c608ada 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -3383,7 +3383,7 @@ set_hash_global_config
 
 Set the global configurations of hash filters::
 
-   set_hash_global_config (port_id) (toeplitz|simple_xor|default) \
+   set_hash_global_config (port_id) (toeplitz|simple_xor|symmetric_toeplitz|default) \
    (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|ipv6-frag| \
    ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload|<flow_id>) \
    (enable|disable)
-- 
1.8.3.1

[dpdk-dev] [PATCH v2 0/2] add symmetric toeplitz hash support

[simei]

From: Simei Su <simei.su@intel.com>

This v2 patch rebase to 19.08-rc2.
[PATCH v2 1/2] ethdev: add new hash function "Symmetric Toeplitz" supported by hardware.
[PATCH v2 2/2] app/testpmd: add command line support for symmetric toeplitz hash configuration.

Simei Su (2):
  ethdev: add symmetric toeplitz hash support
  app/testpmd: add symmetric toeplitz hash support

 app/test-pmd/cmdline.c                      | 12 +++++++++---
 app/test-pmd/cmdline_flow.c                 | 12 +++++++++++-
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  2 +-
 lib/librte_ethdev/rte_flow.h                |  1 +
 4 files changed, 22 insertions(+), 5 deletions(-)

-- 
1.8.3.1

[dpdk-dev] [PATCH v2 1/2] ethdev: add symmetric toeplitz hash support

[simei]

From: Simei Su <simei.su@intel.com>

Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash function.
To support symmetric hash by rte_flow RSS action, this patch adds
new hash function "Symmetric Toeplitz" which is supported by some hardware.

Signed-off-by: Simei Su <simei.su@intel.com>
---
 lib/librte_ethdev/rte_flow.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index b66bf14..77a0c52 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -1814,6 +1814,7 @@ enum rte_eth_hash_function {
 	RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
 	RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
 	RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
+	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ, /**< Symmetric Toeplitz */
 	RTE_ETH_HASH_FUNCTION_MAX,
 };
 
-- 
1.8.3.1

Re: [dpdk-dev] [PATCH v2 1/2] ethdev: add symmetric toeplitz hash support

[Ori Kam]

> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of simei
> Sent: Friday, July 26, 2019 3:55 AM
> To: qi.z.zhang@intel.com; jingjing.wu@intel.com; Adrien Mazarguil
> <adrien.mazarguil@6wind.com>
> Cc: dev@dpdk.org; simei.su@intel.com
> Subject: [dpdk-dev] [PATCH v2 1/2] ethdev: add symmetric toeplitz hash support
> 
> From: Simei Su <simei.su@intel.com>
> 
> Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash function.
> To support symmetric hash by rte_flow RSS action, this patch adds
> new hash function "Symmetric Toeplitz" which is supported by some hardware.
> 
> Signed-off-by: Simei Su <simei.su@intel.com>
> ---

Acked-by: Ori Kam <orika@mellanox.com>
Thanks,
Ori Kam

>  lib/librte_ethdev/rte_flow.h | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> index b66bf14..77a0c52 100644
> --- a/lib/librte_ethdev/rte_flow.h
> +++ b/lib/librte_ethdev/rte_flow.h
> @@ -1814,6 +1814,7 @@ enum rte_eth_hash_function {
>  	RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
>  	RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
>  	RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
> +	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ, /**< Symmetric
> Toeplitz */
>  	RTE_ETH_HASH_FUNCTION_MAX,
>  };
> 
> --
> 1.8.3.1

[dpdk-dev] [PATCH v2 2/2] app/testpmd: add symmetric toeplitz hash support

[simei]

From: Simei Su <simei.su@intel.com>

This patch adds command line support for Symmetric Toeplitz
hash configuration.

Signed-off-by: Simei Su <simei.su@intel.com>
---
 app/test-pmd/cmdline.c                      | 12 +++++++++---
 app/test-pmd/cmdline_flow.c                 | 12 +++++++++++-
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  2 +-
 3 files changed, 21 insertions(+), 5 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a28362d..60c159f 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -1055,7 +1055,7 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"get_hash_global_config (port_id)\n"
 			"    Get the global configurations of hash filters.\n\n"
 
-			"set_hash_global_config (port_id) (toeplitz|simple_xor|default)"
+			"set_hash_global_config (port_id) (toeplitz|simple_xor|symmetric_toeplitz|default)"
 			" (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|"
 			"ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload)"
 			" (enable|disable)\n"
@@ -12258,6 +12258,9 @@ struct cmd_get_hash_global_config_result {
 	case RTE_ETH_HASH_FUNCTION_SIMPLE_XOR:
 		printf("Hash function is Simple XOR\n");
 		break;
+	case RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ:
+		printf("Hash function is Symmetric Toeplitz\n");
+		break;
 	default:
 		printf("Unknown hash function\n");
 		break;
@@ -12331,6 +12334,9 @@ struct cmd_set_hash_global_config_result {
 	else if (!strcmp(res->hash_func, "simple_xor"))
 		info.info.global_conf.hash_func =
 			RTE_ETH_HASH_FUNCTION_SIMPLE_XOR;
+	else if	(!strcmp(res->hash_func, "symmetric_toeplitz"))
+		info.info.global_conf.hash_func =
+			RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ;
 	else if (!strcmp(res->hash_func, "default"))
 		info.info.global_conf.hash_func =
 			RTE_ETH_HASH_FUNCTION_DEFAULT;
@@ -12360,7 +12366,7 @@ struct cmd_set_hash_global_config_result {
 		port_id, UINT16);
 cmdline_parse_token_string_t cmd_set_hash_global_config_hash_func =
 	TOKEN_STRING_INITIALIZER(struct cmd_set_hash_global_config_result,
-		hash_func, "toeplitz#simple_xor#default");
+		hash_func, "toeplitz#simple_xor#symmetric_toeplitz#default");
 cmdline_parse_token_string_t cmd_set_hash_global_config_flow_type =
 	TOKEN_STRING_INITIALIZER(struct cmd_set_hash_global_config_result,
 		flow_type,
@@ -12374,7 +12380,7 @@ struct cmd_set_hash_global_config_result {
 	.f = cmd_set_hash_global_config_parsed,
 	.data = NULL,
 	.help_str = "set_hash_global_config <port_id> "
-		"toeplitz|simple_xor|default "
+		"toeplitz|simple_xor|symmetric_toeplitz|default "
 		"ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|"
 		"ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|"
 		"l2_payload enable|disable",
diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 4958713..4968df9 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -220,6 +220,7 @@ enum index {
 	ACTION_RSS_FUNC_DEFAULT,
 	ACTION_RSS_FUNC_TOEPLITZ,
 	ACTION_RSS_FUNC_SIMPLE_XOR,
+	ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ,
 	ACTION_RSS_TYPES,
 	ACTION_RSS_TYPE,
 	ACTION_RSS_KEY,
@@ -2457,7 +2458,8 @@ static int comp_vc_action_rss_queue(struct context *, const struct token *,
 		.next = NEXT(action_rss,
 			     NEXT_ENTRY(ACTION_RSS_FUNC_DEFAULT,
 					ACTION_RSS_FUNC_TOEPLITZ,
-					ACTION_RSS_FUNC_SIMPLE_XOR)),
+					ACTION_RSS_FUNC_SIMPLE_XOR,
+					ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ)),
 	},
 	[ACTION_RSS_FUNC_DEFAULT] = {
 		.name = "default",
@@ -2474,6 +2476,11 @@ static int comp_vc_action_rss_queue(struct context *, const struct token *,
 		.help = "simple XOR hash function",
 		.call = parse_vc_action_rss_func,
 	},
+	[ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ] = {
+		.name = "symmetric_toeplitz",
+		.help = "Symmetric Toeplitz hash function",
+		.call = parse_vc_action_rss_func,
+	},
 	[ACTION_RSS_LEVEL] = {
 		.name = "level",
 		.help = "encapsulation level for \"types\"",
@@ -3588,6 +3595,9 @@ static int comp_vc_action_rss_queue(struct context *, const struct token *,
 	case ACTION_RSS_FUNC_SIMPLE_XOR:
 		func = RTE_ETH_HASH_FUNCTION_SIMPLE_XOR;
 		break;
+	case ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ:
+		func = RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ;
+		break;
 	default:
 		return -1;
 	}
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 313e070..6343638 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -3471,7 +3471,7 @@ set_hash_global_config
 
 Set the global configurations of hash filters::
 
-   set_hash_global_config (port_id) (toeplitz|simple_xor|default) \
+   set_hash_global_config (port_id) (toeplitz|simple_xor|symmetric_toeplitz|default) \
    (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|ipv6-frag| \
    ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload|<flow_id>) \
    (enable|disable)
-- 
1.8.3.1

Re: [dpdk-dev] [PATCH v2 2/2] app/testpmd: add symmetric toeplitz hash support

[Ori Kam]

> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of simei
> Sent: Friday, July 26, 2019 3:55 AM
> To: qi.z.zhang@intel.com; jingjing.wu@intel.com; Adrien Mazarguil
> <adrien.mazarguil@6wind.com>
> Cc: dev@dpdk.org; simei.su@intel.com
> Subject: [dpdk-dev] [PATCH v2 2/2] app/testpmd: add symmetric toeplitz hash
> support
> 
> From: Simei Su <simei.su@intel.com>
> 
> This patch adds command line support for Symmetric Toeplitz
> hash configuration.
> 
> Signed-off-by: Simei Su <simei.su@intel.com>
> ---


Acked-by: Ori Kam <orika@mellanox.com>
Thanks,
Ori Kam

>  app/test-pmd/cmdline.c                      | 12 +++++++++---
>  app/test-pmd/cmdline_flow.c                 | 12 +++++++++++-
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |  2 +-
>  3 files changed, 21 insertions(+), 5 deletions(-)
> 
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index a28362d..60c159f 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -1055,7 +1055,7 @@ static void cmd_help_long_parsed(void
> *parsed_result,
>  			"get_hash_global_config (port_id)\n"
>  			"    Get the global configurations of hash filters.\n\n"
> 
> -			"set_hash_global_config (port_id)
> (toeplitz|simple_xor|default)"
> +			"set_hash_global_config (port_id)
> (toeplitz|simple_xor|symmetric_toeplitz|default)"
>  			" (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-
> other|ipv6|"
>  			"ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-
> other|l2_payload)"
>  			" (enable|disable)\n"
> @@ -12258,6 +12258,9 @@ struct cmd_get_hash_global_config_result {
>  	case RTE_ETH_HASH_FUNCTION_SIMPLE_XOR:
>  		printf("Hash function is Simple XOR\n");
>  		break;
> +	case RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ:
> +		printf("Hash function is Symmetric Toeplitz\n");
> +		break;
>  	default:
>  		printf("Unknown hash function\n");
>  		break;
> @@ -12331,6 +12334,9 @@ struct cmd_set_hash_global_config_result {
>  	else if (!strcmp(res->hash_func, "simple_xor"))
>  		info.info.global_conf.hash_func =
>  			RTE_ETH_HASH_FUNCTION_SIMPLE_XOR;
> +	else if	(!strcmp(res->hash_func, "symmetric_toeplitz"))
> +		info.info.global_conf.hash_func =
> +			RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ;
>  	else if (!strcmp(res->hash_func, "default"))
>  		info.info.global_conf.hash_func =
>  			RTE_ETH_HASH_FUNCTION_DEFAULT;
> @@ -12360,7 +12366,7 @@ struct cmd_set_hash_global_config_result {
>  		port_id, UINT16);
>  cmdline_parse_token_string_t cmd_set_hash_global_config_hash_func =
>  	TOKEN_STRING_INITIALIZER(struct
> cmd_set_hash_global_config_result,
> -		hash_func, "toeplitz#simple_xor#default");
> +		hash_func, "toeplitz#simple_xor#symmetric_toeplitz#default");
>  cmdline_parse_token_string_t cmd_set_hash_global_config_flow_type =
>  	TOKEN_STRING_INITIALIZER(struct
> cmd_set_hash_global_config_result,
>  		flow_type,
> @@ -12374,7 +12380,7 @@ struct cmd_set_hash_global_config_result {
>  	.f = cmd_set_hash_global_config_parsed,
>  	.data = NULL,
>  	.help_str = "set_hash_global_config <port_id> "
> -		"toeplitz|simple_xor|default "
> +		"toeplitz|simple_xor|symmetric_toeplitz|default "
>  		"ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|"
>  		"ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|"
>  		"l2_payload enable|disable",
> diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
> index 4958713..4968df9 100644
> --- a/app/test-pmd/cmdline_flow.c
> +++ b/app/test-pmd/cmdline_flow.c
> @@ -220,6 +220,7 @@ enum index {
>  	ACTION_RSS_FUNC_DEFAULT,
>  	ACTION_RSS_FUNC_TOEPLITZ,
>  	ACTION_RSS_FUNC_SIMPLE_XOR,
> +	ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ,
>  	ACTION_RSS_TYPES,
>  	ACTION_RSS_TYPE,
>  	ACTION_RSS_KEY,
> @@ -2457,7 +2458,8 @@ static int comp_vc_action_rss_queue(struct context
> *, const struct token *,
>  		.next = NEXT(action_rss,
>  			     NEXT_ENTRY(ACTION_RSS_FUNC_DEFAULT,
>  					ACTION_RSS_FUNC_TOEPLITZ,
> -					ACTION_RSS_FUNC_SIMPLE_XOR)),
> +					ACTION_RSS_FUNC_SIMPLE_XOR,
> +
> 	ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ)),
>  	},
>  	[ACTION_RSS_FUNC_DEFAULT] = {
>  		.name = "default",
> @@ -2474,6 +2476,11 @@ static int comp_vc_action_rss_queue(struct context
> *, const struct token *,
>  		.help = "simple XOR hash function",
>  		.call = parse_vc_action_rss_func,
>  	},
> +	[ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ] = {
> +		.name = "symmetric_toeplitz",
> +		.help = "Symmetric Toeplitz hash function",
> +		.call = parse_vc_action_rss_func,
> +	},
>  	[ACTION_RSS_LEVEL] = {
>  		.name = "level",
>  		.help = "encapsulation level for \"types\"",
> @@ -3588,6 +3595,9 @@ static int comp_vc_action_rss_queue(struct context
> *, const struct token *,
>  	case ACTION_RSS_FUNC_SIMPLE_XOR:
>  		func = RTE_ETH_HASH_FUNCTION_SIMPLE_XOR;
>  		break;
> +	case ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ:
> +		func = RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ;
> +		break;
>  	default:
>  		return -1;
>  	}
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 313e070..6343638 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -3471,7 +3471,7 @@ set_hash_global_config
> 
>  Set the global configurations of hash filters::
> 
> -   set_hash_global_config (port_id) (toeplitz|simple_xor|default) \
> +   set_hash_global_config (port_id)
> (toeplitz|simple_xor|symmetric_toeplitz|default) \
>     (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|ipv6-frag| \
>     ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload|<flow_id>) \
>     (enable|disable)
> --
> 1.8.3.1

Re: [dpdk-dev] [PATCH v2 0/2] add symmetric toeplitz hash support

[Zhang, Qi Z]

> -----Original Message-----
> From: Su, Simei
> Sent: Friday, July 26, 2019 8:55 AM
> To: Zhang, Qi Z <qi.z.zhang@intel.com>; Wu, Jingjing
> <jingjing.wu@intel.com>; adrien.mazarguil@6wind.com
> Cc: dev@dpdk.org; Su, Simei <simei.su@intel.com>
> Subject: [PATCH v2 0/2] add symmetric toeplitz hash support
> 
> From: Simei Su <simei.su@intel.com>
> 
> This v2 patch rebase to 19.08-rc2.
> [PATCH v2 1/2] ethdev: add new hash function "Symmetric Toeplitz"
> supported by hardware.
> [PATCH v2 2/2] app/testpmd: add command line support for symmetric
> toeplitz hash configuration.
> 
> Simei Su (2):
>   ethdev: add symmetric toeplitz hash support
>   app/testpmd: add symmetric toeplitz hash support
> 
>  app/test-pmd/cmdline.c                      | 12 +++++++++---
>  app/test-pmd/cmdline_flow.c                 | 12 +++++++++++-
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |  2 +-
>  lib/librte_ethdev/rte_flow.h                |  1 +
>  4 files changed, 22 insertions(+), 5 deletions(-)
> 
> --
> 1.8.3.1

Reviewed by: Qi Zhang <qi.z.zhang@intel.com>

[dpdk-dev] [PATCH v3 0/2] add symmetric toeplitz hash support

[Simei Su]

[PATCH v3 1/2] ethdev: add new hash function "Symmetric Toeplitz" supported by hardware.
[PATCH v3 2/2] app/testpmd: add command line support for symmetric toeplitz hash configuration.

v3:
* Add a definition for Symmetric Toeplitz function.

v2:
* Rebase to 19.08-rc2.

Simei Su (2):
  ethdev: add symmetric toeplitz hash support
  app/testpmd: add symmetric toeplitz hash support

 app/test-pmd/cmdline.c                      | 12 +++++++++---
 app/test-pmd/cmdline_flow.c                 | 12 +++++++++++-
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  2 +-
 lib/librte_ethdev/rte_flow.h                |  6 ++++++
 4 files changed, 27 insertions(+), 5 deletions(-)

-- 
1.8.3.1

[dpdk-dev] [PATCH v3 1/2] ethdev: add symmetric toeplitz hash support

[Simei Su]

Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash function.
To support symmetric hash by rte_flow RSS action, this patch adds
new hash function "Symmetric Toeplitz" which is supported by some hardware.

Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
---
 lib/librte_ethdev/rte_flow.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index 354cb1d..ca4e868 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -1814,6 +1814,12 @@ enum rte_eth_hash_function {
 	RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
 	RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
 	RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
+	/**
+	 * Symmetric Toeplitz: src, dst will be replaced by
+	 * xor(src, dst). For the case with src/dst only,
+	 * src or dst address will xor with zero pair.
+	 */
+	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ,
 	RTE_ETH_HASH_FUNCTION_MAX,
 };
 
-- 
1.8.3.1

Re: [dpdk-dev] [PATCH v3 1/2] ethdev: add symmetric toeplitz hash support

[Andrew Rybchenko]

On 10/1/19 12:22 PM, Simei Su wrote:
> Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash function.
> To support symmetric hash by rte_flow RSS action, this patch adds
> new hash function "Symmetric Toeplitz" which is supported by some hardware.
>
> Signed-off-by: Simei Su <simei.su@intel.com>
> Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
> Acked-by: Ori Kam <orika@mellanox.com>

Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>

> ---
>   lib/librte_ethdev/rte_flow.h | 6 ++++++
>   1 file changed, 6 insertions(+)
>
> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> index 354cb1d..ca4e868 100644
> --- a/lib/librte_ethdev/rte_flow.h
> +++ b/lib/librte_ethdev/rte_flow.h
> @@ -1814,6 +1814,12 @@ enum rte_eth_hash_function {
>   	RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
>   	RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
>   	RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
> +	/**
> +	 * Symmetric Toeplitz: src, dst will be replaced by
> +	 * xor(src, dst). For the case with src/dst only,
> +	 * src or dst address will xor with zero pair.
> +	 */
> +	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ,
>   	RTE_ETH_HASH_FUNCTION_MAX,
>   };

It looks like symmetric does not make sense in the case of src/dst only.
The goal of symmetric function is to make it the same for both directions.

[dpdk-dev] [PATCH v3 2/2] app/testpmd: add symmetric toeplitz hash support

[Simei Su]

This patch adds command line support for Symmetric Toeplitz
hash configuration.

Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
---
 app/test-pmd/cmdline.c                      | 12 +++++++++---
 app/test-pmd/cmdline_flow.c                 | 12 +++++++++++-
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  2 +-
 3 files changed, 21 insertions(+), 5 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index def471d..ded56bf 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -1056,7 +1056,7 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"get_hash_global_config (port_id)\n"
 			"    Get the global configurations of hash filters.\n\n"
 
-			"set_hash_global_config (port_id) (toeplitz|simple_xor|default)"
+			"set_hash_global_config (port_id) (toeplitz|simple_xor|symmetric_toeplitz|default)"
 			" (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|"
 			"ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload)"
 			" (enable|disable)\n"
@@ -12196,6 +12196,9 @@ struct cmd_get_hash_global_config_result {
 	case RTE_ETH_HASH_FUNCTION_SIMPLE_XOR:
 		printf("Hash function is Simple XOR\n");
 		break;
+	case RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ:
+		printf("Hash function is Symmetric Toeplitz\n");
+		break;
 	default:
 		printf("Unknown hash function\n");
 		break;
@@ -12269,6 +12272,9 @@ struct cmd_set_hash_global_config_result {
 	else if (!strcmp(res->hash_func, "simple_xor"))
 		info.info.global_conf.hash_func =
 			RTE_ETH_HASH_FUNCTION_SIMPLE_XOR;
+	else if (!strcmp(res->hash_func, "symmetric_toeplitz"))
+		info.info.global_conf.hash_func =
+			RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ;
 	else if (!strcmp(res->hash_func, "default"))
 		info.info.global_conf.hash_func =
 			RTE_ETH_HASH_FUNCTION_DEFAULT;
@@ -12298,7 +12304,7 @@ struct cmd_set_hash_global_config_result {
 		port_id, UINT16);
 cmdline_parse_token_string_t cmd_set_hash_global_config_hash_func =
 	TOKEN_STRING_INITIALIZER(struct cmd_set_hash_global_config_result,
-		hash_func, "toeplitz#simple_xor#default");
+		hash_func, "toeplitz#simple_xor#symmetric_toeplitz#default");
 cmdline_parse_token_string_t cmd_set_hash_global_config_flow_type =
 	TOKEN_STRING_INITIALIZER(struct cmd_set_hash_global_config_result,
 		flow_type,
@@ -12312,7 +12318,7 @@ struct cmd_set_hash_global_config_result {
 	.f = cmd_set_hash_global_config_parsed,
 	.data = NULL,
 	.help_str = "set_hash_global_config <port_id> "
-		"toeplitz|simple_xor|default "
+		"toeplitz|simple_xor|symmetric_toeplitz|default "
 		"ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|"
 		"ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|"
 		"l2_payload enable|disable",
diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 369426c..2e5f237 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -220,6 +220,7 @@ enum index {
 	ACTION_RSS_FUNC_DEFAULT,
 	ACTION_RSS_FUNC_TOEPLITZ,
 	ACTION_RSS_FUNC_SIMPLE_XOR,
+	ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ,
 	ACTION_RSS_TYPES,
 	ACTION_RSS_TYPE,
 	ACTION_RSS_KEY,
@@ -2457,7 +2458,8 @@ static int comp_vc_action_rss_queue(struct context *, const struct token *,
 		.next = NEXT(action_rss,
 			     NEXT_ENTRY(ACTION_RSS_FUNC_DEFAULT,
 					ACTION_RSS_FUNC_TOEPLITZ,
-					ACTION_RSS_FUNC_SIMPLE_XOR)),
+					ACTION_RSS_FUNC_SIMPLE_XOR,
+					ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ)),
 	},
 	[ACTION_RSS_FUNC_DEFAULT] = {
 		.name = "default",
@@ -2474,6 +2476,11 @@ static int comp_vc_action_rss_queue(struct context *, const struct token *,
 		.help = "simple XOR hash function",
 		.call = parse_vc_action_rss_func,
 	},
+	[ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ] = {
+		.name = "symmetric_toeplitz",
+		.help = "Symmetric Toeplitz hash function",
+		.call = parse_vc_action_rss_func,
+	},
 	[ACTION_RSS_LEVEL] = {
 		.name = "level",
 		.help = "encapsulation level for \"types\"",
@@ -3591,6 +3598,9 @@ static int comp_vc_action_rss_queue(struct context *, const struct token *,
 	case ACTION_RSS_FUNC_SIMPLE_XOR:
 		func = RTE_ETH_HASH_FUNCTION_SIMPLE_XOR;
 		break;
+	case ACTION_RSS_FUNC_SYMMETRIC_TOEPLITZ:
+		func = RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ;
+		break;
 	default:
 		return -1;
 	}
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index cba5ba1..e68b8f5 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -3403,7 +3403,7 @@ set_hash_global_config
 
 Set the global configurations of hash filters::
 
-   set_hash_global_config (port_id) (toeplitz|simple_xor|default) \
+   set_hash_global_config (port_id) (toeplitz|simple_xor|symmetric_toeplitz|default) \
    (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|ipv6-frag| \
    ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload|<flow_id>) \
    (enable|disable)
-- 
1.8.3.1

Re: [dpdk-dev] [PATCH v3 0/2] add symmetric toeplitz hash support

[Ferruh Yigit]

On 10/1/2019 10:22 AM, Simei Su wrote:
> [PATCH v3 1/2] ethdev: add new hash function "Symmetric Toeplitz" supported by hardware.
> [PATCH v3 2/2] app/testpmd: add command line support for symmetric toeplitz hash configuration.
> 
> v3:
> * Add a definition for Symmetric Toeplitz function.
> 
> v2:
> * Rebase to 19.08-rc2.
> 
> Simei Su (2):
>   ethdev: add symmetric toeplitz hash support
>   app/testpmd: add symmetric toeplitz hash support

Series applied to dpdk-next-net/master, thanks.

Re: [dpdk-dev] [PATCH 0/2] add symmetric toeplitz hash support

[Zhang, Qi Z]

> -----Original Message-----
> From: Su, Simei
> Sent: Thursday, July 25, 2019 12:57 PM
> To: Zhang, Qi Z <qi.z.zhang@intel.com>; Wu, Jingjing
> <jingjing.wu@intel.com>; adrien.mazarguil@6wind.com
> Cc: dev@dpdk.org; Su, Simei <simei.su@intel.com>
> Subject: [PATCH 0/2] add symmetric toeplitz hash support
> 
> From: Simei Su <simei.su@intel.com>
> 
> [PATCH 1/2] ethdev: add new hash function "Symmetric Toeplitz" supported
> by hardware.
> [PATCH 2/2] app/testpmd: add command line support for symmetric toeplitz
> hash configuration.
> 
> Simei Su (2):
>   ethdev: add symmetric toeplitz hash support
>   app/testpmd: add symmetric toeplitz hash support
> 
>  app/test-pmd/cmdline.c                      | 12 +++++++++---
>  app/test-pmd/cmdline_flow.c                 | 12 +++++++++++-
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |  2 +-
>  lib/librte_ethdev/rte_flow.h                |  1 +
>  4 files changed, 22 insertions(+), 5 deletions(-)
> 
> --
> 1.8.3.1

Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>