From: "Zhang, Qi Z" <qi.z.zhang@intel.com>
To: "Zhao1, Wei" <wei.zhao1@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v2 4/4] net/ice: support switch flow for specific L4 type
Date: Mon, 22 Jun 2020 15:36:19 +0000 [thread overview]
Message-ID: <039ED4275CED7440929022BC67E706115484301E@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <20200617061429.6447-5-wei.zhao1@intel.com>
> -----Original Message-----
> From: Zhao1, Wei <wei.zhao1@intel.com>
> Sent: Wednesday, June 17, 2020 2:14 PM
> To: dev@dpdk.org
> Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Zhao1, Wei
> <wei.zhao1@intel.com>
> Subject: [PATCH v2 4/4] net/ice: support switch flow for specific L4 type
>
> This patch add more specific tunnel type for ipv4/ipv6 packet, it enable
> tcp/udp layer of ipv4/ipv6 as L4 payload but without
> L4 dst/src port number as input set for the switch filter rule.
>
> Fixes: 47d460d63233 ("net/ice: rework switch filter")
> Cc: stable@dpdk.org
>
> Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> ---
> drivers/net/ice/ice_switch_filter.c | 23 +++++++++++++++++------
> 1 file changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ice/ice_switch_filter.c
> b/drivers/net/ice/ice_switch_filter.c
> index 3b38195d6..f4fd8ff33 100644
> --- a/drivers/net/ice/ice_switch_filter.c
> +++ b/drivers/net/ice/ice_switch_filter.c
> @@ -471,11 +471,11 @@ ice_switch_inset_get(const struct rte_flow_item
> pattern[],
> const struct rte_flow_item_l2tpv3oip *l2tp_spec, *l2tp_mask;
> const struct rte_flow_item_pfcp *pfcp_spec, *pfcp_mask;
> uint64_t input_set = ICE_INSET_NONE;
> + uint16_t tunnel_valid = 0;
why not vxlan_valid and nvgre_valid to keep consistent naming with other variables?
Can we use a bitmap
> bool pppoe_elem_valid = 0;
> bool pppoe_patt_valid = 0;
> bool pppoe_prot_valid = 0;
> bool profile_rule = 0;
> - bool tunnel_valid = 0;
> bool ipv6_valiad = 0;
> bool ipv4_valiad = 0;
> bool udp_valiad = 0;
> @@ -960,7 +960,7 @@ ice_switch_inset_get(const struct rte_flow_item
> pattern[],
> "Invalid NVGRE item");
> return 0;
> }
> - tunnel_valid = 1;
> + tunnel_valid = 2;
> if (nvgre_spec && nvgre_mask) {
> list[t].type = ICE_NVGRE;
> if (nvgre_mask->tni[0] ||
> @@ -1325,6 +1325,21 @@ ice_switch_inset_get(const struct rte_flow_item
> pattern[],
> *tun_type = ICE_SW_TUN_PPPOE;
> }
>
> + if (!pppoe_patt_valid) {
> + if (tunnel_valid == 1)
> + *tun_type = ICE_SW_TUN_VXLAN;
> + else if (tunnel_valid == 2)
> + *tun_type = ICE_SW_TUN_NVGRE;
> + else if (ipv4_valiad && tcp_valiad)
> + *tun_type = ICE_SW_IPV4_TCP;
> + else if (ipv4_valiad && udp_valiad)
> + *tun_type = ICE_SW_IPV4_UDP;
> + else if (ipv6_valiad && tcp_valiad)
> + *tun_type = ICE_SW_IPV6_TCP;
> + else if (ipv6_valiad && udp_valiad)
> + *tun_type = ICE_SW_IPV6_UDP;
> + }
> +
> *lkups_num = t;
>
> return input_set;
> @@ -1536,10 +1551,6 @@ ice_switch_parse_pattern_action(struct
> ice_adapter *ad,
>
> for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
> item_num++;
> - if (item->type == RTE_FLOW_ITEM_TYPE_VXLAN)
> - tun_type = ICE_SW_TUN_VXLAN;
> - if (item->type == RTE_FLOW_ITEM_TYPE_NVGRE)
> - tun_type = ICE_SW_TUN_NVGRE;
> if (item->type == RTE_FLOW_ITEM_TYPE_ETH) {
> const struct rte_flow_item_eth *eth_mask;
> if (item->mask)
> --
> 2.19.1
next prev parent reply other threads:[~2020-06-22 15:36 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-05 7:40 [dpdk-dev] [PATCH 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-05 7:40 ` [dpdk-dev] [PATCH 1/4] net/ice: add support " Wei Zhao
2020-06-05 7:40 ` [dpdk-dev] [PATCH 2/4] net/ice: add redirect support for VSI list rule Wei Zhao
2020-06-05 7:40 ` [dpdk-dev] [PATCH 3/4] net/ice: add check for NVGRE protocol Wei Zhao
2020-06-05 7:40 ` [dpdk-dev] [PATCH 4/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-17 6:14 ` [dpdk-dev] [PATCH v2 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-17 6:14 ` [dpdk-dev] [PATCH v2 1/4] net/ice: add support " Wei Zhao
2020-06-17 6:14 ` [dpdk-dev] [PATCH v2 2/4] net/ice: add redirect support for VSI list rule Wei Zhao
2020-06-22 15:25 ` Zhang, Qi Z
2020-06-17 6:14 ` [dpdk-dev] [PATCH v2 3/4] net/ice: add check for NVGRE protocol Wei Zhao
2020-06-22 15:49 ` Zhang, Qi Z
2020-06-23 1:11 ` Zhao1, Wei
2020-06-17 6:14 ` [dpdk-dev] [PATCH v2 4/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-22 15:36 ` Zhang, Qi Z [this message]
2020-06-23 1:12 ` Zhao1, Wei
2020-06-28 3:21 ` [dpdk-dev] [PATCH v3 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-28 3:21 ` [dpdk-dev] [PATCH v3 1/4] net/ice: add support " Wei Zhao
2020-06-28 3:21 ` [dpdk-dev] [PATCH v3 2/4] net/ice: fix tunnel type for switch rule Wei Zhao
2020-06-28 3:21 ` [dpdk-dev] [PATCH v3 3/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-28 3:21 ` [dpdk-dev] [PATCH v3 4/4] net/ice: add input set byte number check Wei Zhao
2020-06-28 5:01 ` [dpdk-dev] [PATCH v3 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-28 5:01 ` [dpdk-dev] [PATCH v3 1/4] net/ice: add support " Wei Zhao
2020-06-28 5:01 ` [dpdk-dev] [PATCH v3 2/4] net/ice: fix tunnel type for switch rule Wei Zhao
2020-06-28 5:01 ` [dpdk-dev] [PATCH v3 3/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-29 1:55 ` Zhang, Qi Z
2020-06-29 2:01 ` Zhao1, Wei
2020-06-28 5:01 ` [dpdk-dev] [PATCH v3 4/4] net/ice: add input set byte number check Wei Zhao
2020-06-28 5:28 ` [dpdk-dev] [PATCH v4 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-28 5:28 ` [dpdk-dev] [PATCH v4 1/4] net/ice: add support " Wei Zhao
2020-06-28 5:28 ` [dpdk-dev] [PATCH v4 2/4] net/ice: fix tunnel type for switch rule Wei Zhao
2020-06-28 5:28 ` [dpdk-dev] [PATCH v4 3/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-28 5:28 ` [dpdk-dev] [PATCH v4 4/4] net/ice: add input set byte number check Wei Zhao
2020-06-29 5:10 ` [dpdk-dev] [PATCH v5 0/5] enable more PPPoE packet type for switch Wei Zhao
2020-06-29 5:10 ` [dpdk-dev] [PATCH v5 1/5] net/ice: add support " Wei Zhao
2020-06-29 5:10 ` [dpdk-dev] [PATCH v5 2/5] net/ice: fix tunnel type for switch rule Wei Zhao
2020-06-29 5:10 ` [dpdk-dev] [PATCH v5 3/5] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-29 5:10 ` [dpdk-dev] [PATCH v5 4/5] net/ice: add input set byte number check Wei Zhao
2020-06-29 5:10 ` [dpdk-dev] [PATCH v5 5/5] net/ice: fix typo Wei Zhao
2020-07-03 2:47 ` [dpdk-dev] [PATCH v5 0/5] enable more PPPoE packet type for switch Lu, Nannan
2020-07-03 6:19 ` [dpdk-dev] [PATCH v6 " Wei Zhao
2020-07-03 6:19 ` [dpdk-dev] [PATCH v6 1/5] net/ice: add support more PPPoE packeat " Wei Zhao
2020-07-03 6:19 ` [dpdk-dev] [PATCH v6 2/5] net/ice: fix tunnel type for switch rule Wei Zhao
2020-07-03 6:19 ` [dpdk-dev] [PATCH v6 3/5] net/ice: support switch flow for specific L4 type Wei Zhao
2020-07-03 6:19 ` [dpdk-dev] [PATCH v6 4/5] net/ice: add input set byte number check Wei Zhao
2020-07-03 6:19 ` [dpdk-dev] [PATCH v6 5/5] net/ice: fix typo Wei Zhao
2020-07-03 13:46 ` [dpdk-dev] [PATCH v6 0/5] enable more PPPoE packet type for switch Zhang, Qi Z
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=039ED4275CED7440929022BC67E706115484301E@SHSMSX103.ccr.corp.intel.com \
--to=qi.z.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
--cc=wei.zhao1@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).