From: "Zhang, Qi Z" <qi.z.zhang@intel.com>
To: "Su, Simei" <simei.su@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "Wang, Haiyue" <haiyue.wang@intel.com>
Subject: Re: [dpdk-dev] [PATCH] net/ice: enable Rx timestamp on Flex Descriptor
Date: Fri, 24 Sep 2021 05:25:23 +0000 [thread overview]
Message-ID: <03da90dbff9147ef96a5a5858dceaa53@intel.com> (raw)
In-Reply-To: <20210918065640.402195-1-simei.su@intel.com>
> -----Original Message-----
> From: Su, Simei <simei.su@intel.com>
> Sent: Saturday, September 18, 2021 2:57 PM
> To: Zhang, Qi Z <qi.z.zhang@intel.com>
> Cc: dev@dpdk.org; Wang, Haiyue <haiyue.wang@intel.com>; Su, Simei
> <simei.su@intel.com>
> Subject: [PATCH] net/ice: enable Rx timestamp on Flex Descriptor
>
> Use the dynamic mbuf to register timestamp field and flag.
> The ice has the feature to dump Rx timestamp value into dynamic mbuf field
> by flex descriptor. This feature is turned on by dev config
> "enable-rx-timestamp". Currently, it's only supported under scalar path.
>
> Signed-off-by: Simei Su <simei.su@intel.com>
> ---
> doc/guides/rel_notes/release_21_11.rst | 1 +
> drivers/net/ice/ice_ethdev.c | 6 +-
> drivers/net/ice/ice_rxtx.c | 107
> +++++++++++++++++++++++++++++++++
> drivers/net/ice/ice_rxtx.h | 6 ++
> drivers/net/ice/ice_rxtx_vec_common.h | 3 +
> 5 files changed, 122 insertions(+), 1 deletion(-)
>
> diff --git a/doc/guides/rel_notes/release_21_11.rst
> b/doc/guides/rel_notes/release_21_11.rst
> index dc44739..1b9dac6 100644
> --- a/doc/guides/rel_notes/release_21_11.rst
> +++ b/doc/guides/rel_notes/release_21_11.rst
> @@ -70,6 +70,7 @@ New Features
> * **Updated Intel ice driver.**
>
> Added 1PPS out support by a devargs.
> + * Added Rx timstamp support by dynamic mbuf on Flex Descriptor.
How about just "added DEV_RX_OFFLOAD_TIMESTAMP support"
>
>
> Removed Items
> diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c index
> 76dcabf..06adf43 100644
> --- a/drivers/net/ice/ice_ethdev.c
> +++ b/drivers/net/ice/ice_ethdev.c
> @@ -31,6 +31,9 @@
> #define ICE_HW_DEBUG_MASK_ARG "hw_debug_mask"
> #define ICE_ONE_PPS_OUT_ARG "pps_out"
>
> +uint64_t ice_timestamp_dynflag;
> +int ice_timestamp_dynfield_offset = -1;
> +
> static const char * const ice_valid_args[] = {
> ICE_SAFE_MODE_SUPPORT_ARG,
> ICE_PIPELINE_MODE_SUPPORT_ARG,
> @@ -3672,7 +3675,8 @@ ice_dev_info_get(struct rte_eth_dev *dev, struct
> rte_eth_dev_info *dev_info)
> DEV_RX_OFFLOAD_QINQ_STRIP |
> DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM |
> DEV_RX_OFFLOAD_VLAN_EXTEND |
> - DEV_RX_OFFLOAD_RSS_HASH;
> + DEV_RX_OFFLOAD_RSS_HASH |
> + DEV_RX_OFFLOAD_TIMESTAMP;
> dev_info->tx_offload_capa |=
> DEV_TX_OFFLOAD_QINQ_INSERT |
> DEV_TX_OFFLOAD_IPV4_CKSUM |
> diff --git a/drivers/net/ice/ice_rxtx.c b/drivers/net/ice/ice_rxtx.c index
> 5d7ab4f..717d3f0 100644
> --- a/drivers/net/ice/ice_rxtx.c
> +++ b/drivers/net/ice/ice_rxtx.c
> @@ -302,6 +302,18 @@ ice_program_hw_rx_queue(struct ice_rx_queue
> *rxq)
> }
> }
>
> + if (rxq->offloads & DEV_RX_OFFLOAD_TIMESTAMP) {
> + /* Register mbuf field and flag for Rx timestamp */
> + err = rte_mbuf_dyn_rx_timestamp_register(
> + &ice_timestamp_dynfield_offset,
> + &ice_timestamp_dynflag);
> + if (err != 0) {
> + PMD_INIT_LOG(ERR,
> + "Cannot register mbuf field/flag for timestamp");
> + return -EINVAL;
> + }
> + }
> +
> memset(&rx_ctx, 0, sizeof(rx_ctx));
>
> rx_ctx.base = rxq->rx_ring_dma / ICE_QUEUE_BASE_ADDR_UNIT; @@
> -354,6 +366,9 @@ ice_program_hw_rx_queue(struct ice_rx_queue *rxq)
> regval |= (0x03 << QRXFLXP_CNTXT_RXDID_PRIO_S) &
> QRXFLXP_CNTXT_RXDID_PRIO_M;
>
> + if (rxq->offloads & DEV_RX_OFFLOAD_TIMESTAMP)
> + regval |= QRXFLXP_CNTXT_TS_M;
> +
> ICE_WRITE_REG(hw, QRXFLXP_CNTXT(rxq->reg_idx), regval);
>
> err = ice_clear_rxq_ctx(hw, rxq->reg_idx); @@ -1530,6 +1545,45 @@
> ice_rxd_to_vlan_tci(struct rte_mbuf *mb, volatile union ice_rx_flex_desc
> *rxdp)
> mb->vlan_tci, mb->vlan_tci_outer); }
>
> +uint64_t
> +ice_read_time(struct ice_hw *hw)
> +{
> + uint32_t hi, lo, lo2;
> + uint64_t time;
> +
> + lo = ICE_READ_REG(hw, GLTSYN_TIME_L(0));
> + hi = ICE_READ_REG(hw, GLTSYN_TIME_H(0));
> + lo2 = ICE_READ_REG(hw, GLTSYN_TIME_L(0));
> +
> + if (lo2 < lo) {
> + lo = ICE_READ_REG(hw, GLTSYN_TIME_L(0));
> + hi = ICE_READ_REG(hw, GLTSYN_TIME_H(0));
> + }
> +
> + time = ((uint64_t)hi << 32) | lo;
> +
> + return time;
> +}
> +
> +uint64_t
> +ice_tstamp_convert_32b_64b(uint64_t time, uint64_t timestamp) {
> + const uint64_t mask = 0xFFFFFFFF;
> + uint32_t delta;
> + uint64_t ns;
> +
> + delta = (timestamp - (uint32_t)(time & mask));
> +
> + if (delta > (mask / 2)) {
> + delta = ((uint32_t)(time & mask) - timestamp);
> + ns = time - delta;
> + } else {
> + ns = time + delta;
> + }
> +
> + return ns;
> +}
Above two helper functions can be merged into one or be wrapped by a new function.
and all functions can be defined as a static inline function in ice_rxtx.h.
> +
> #define ICE_LOOK_AHEAD 8
> #if (ICE_LOOK_AHEAD != 8)
> #error "PMD ICE: ICE_LOOK_AHEAD must be 8\n"
> @@ -1546,6 +1600,9 @@ ice_rx_scan_hw_ring(struct ice_rx_queue *rxq)
> int32_t i, j, nb_rx = 0;
> uint64_t pkt_flags = 0;
> uint32_t *ptype_tbl = rxq->vsi->adapter->ptype_tbl;
> + struct ice_vsi *vsi = rxq->vsi;
> + struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
> + uint64_t time, ts_ns;
>
> rxdp = &rxq->rx_ring[rxq->rx_tail];
> rxep = &rxq->sw_ring[rxq->rx_tail];
> @@ -1589,6 +1646,20 @@ ice_rx_scan_hw_ring(struct ice_rx_queue *rxq)
> ice_rxd_to_vlan_tci(mb, &rxdp[j]);
> rxq->rxd_to_pkt_fields(rxq, mb, &rxdp[j]);
>
> + if (rxq->offloads & DEV_RX_OFFLOAD_TIMESTAMP) {
> + rxq->time_high =
> + rte_le_to_cpu_32(rxdp[j].wb.flex_ts.ts_high);
> + time = ice_read_time(hw);
> + ts_ns = ice_tstamp_convert_32b_64b(time,
> + rxq->time_high);
> + if (ice_timestamp_dynflag > 0) {
> + *RTE_MBUF_DYNFIELD(mb,
> + ice_timestamp_dynfield_offset,
> + rte_mbuf_timestamp_t *) = ts_ns;
> + mb->ol_flags |= ice_timestamp_dynflag;
> + }
> + }
> +
> mb->ol_flags |= pkt_flags;
> }
>
> @@ -1772,6 +1843,9 @@ ice_recv_scattered_pkts(void *rx_queue,
> uint64_t dma_addr;
> uint64_t pkt_flags;
> uint32_t *ptype_tbl = rxq->vsi->adapter->ptype_tbl;
> + struct ice_vsi *vsi = rxq->vsi;
> + struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
> + uint64_t time, ts_ns;
>
> while (nb_rx < nb_pkts) {
> rxdp = &rx_ring[rx_id];
> @@ -1882,6 +1956,21 @@ ice_recv_scattered_pkts(void *rx_queue,
> ice_rxd_to_vlan_tci(first_seg, &rxd);
> rxq->rxd_to_pkt_fields(rxq, first_seg, &rxd);
> pkt_flags = ice_rxd_error_to_pkt_flags(rx_stat_err0);
> +
> + if (rxq->offloads & DEV_RX_OFFLOAD_TIMESTAMP) {
> + rxq->time_high =
> + rte_le_to_cpu_32(rxd.wb.flex_ts.ts_high);
> + time = ice_read_time(hw);
> + ts_ns = ice_tstamp_convert_32b_64b(time,
> + rxq->time_high);
> + if (ice_timestamp_dynflag > 0) {
> + *RTE_MBUF_DYNFIELD(first_seg,
> + ice_timestamp_dynfield_offset,
> + rte_mbuf_timestamp_t *) = ts_ns;
> + first_seg->ol_flags |= ice_timestamp_dynflag;
> + }
> + }
> +
> first_seg->ol_flags |= pkt_flags;
> /* Prefetch data of first segment, if configured to do so. */
> rte_prefetch0(RTE_PTR_ADD(first_seg->buf_addr,
> @@ -2237,6 +2326,9 @@ ice_recv_pkts(void *rx_queue,
> uint64_t dma_addr;
> uint64_t pkt_flags;
> uint32_t *ptype_tbl = rxq->vsi->adapter->ptype_tbl;
> + struct ice_vsi *vsi = rxq->vsi;
> + struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
> + uint64_t time, ts_ns;
>
> while (nb_rx < nb_pkts) {
> rxdp = &rx_ring[rx_id];
> @@ -2288,6 +2380,21 @@ ice_recv_pkts(void *rx_queue,
> ice_rxd_to_vlan_tci(rxm, &rxd);
> rxq->rxd_to_pkt_fields(rxq, rxm, &rxd);
> pkt_flags = ice_rxd_error_to_pkt_flags(rx_stat_err0);
> +
> + if (rxq->offloads & DEV_RX_OFFLOAD_TIMESTAMP) {
> + rxq->time_high =
> + rte_le_to_cpu_32(rxd.wb.flex_ts.ts_high);
> + time = ice_read_time(hw);
> + ts_ns = ice_tstamp_convert_32b_64b(time,
> + rxq->time_high);
> + if (ice_timestamp_dynflag > 0) {
> + *RTE_MBUF_DYNFIELD(rxm,
> + ice_timestamp_dynfield_offset,
> + rte_mbuf_timestamp_t *) = ts_ns;
> + rxm->ol_flags |= ice_timestamp_dynflag;
> + }
> + }
> +
> rxm->ol_flags |= pkt_flags;
> /* copy old mbuf to rx_pkts */
> rx_pkts[nb_rx++] = rxm;
> diff --git a/drivers/net/ice/ice_rxtx.h b/drivers/net/ice/ice_rxtx.h index
> b10db08..b3dc80b 100644
> --- a/drivers/net/ice/ice_rxtx.h
> +++ b/drivers/net/ice/ice_rxtx.h
> @@ -40,6 +40,9 @@
>
> #define ICE_RXDID_COMMS_OVS 22
>
> +extern uint64_t ice_timestamp_dynflag;
> +extern int ice_timestamp_dynfield_offset;
> +
> typedef void (*ice_rx_release_mbufs_t)(struct ice_rx_queue *rxq); typedef
> void (*ice_tx_release_mbufs_t)(struct ice_tx_queue *txq); typedef void
> (*ice_rxd_to_pkt_fields_t)(struct ice_rx_queue *rxq, @@ -89,6 +92,7 @@
> struct ice_rx_queue {
> ice_rxd_to_pkt_fields_t rxd_to_pkt_fields; /* handle FlexiMD by RXDID */
> ice_rx_release_mbufs_t rx_rel_mbufs;
> uint64_t offloads;
> + uint32_t time_high;
Why we need this field?
I saw the only place it is referenced is to set value with rte_le_to_cpu_32(rxdp[j].wb.flex_ts.ts_high and parse it to ice_tstamp_convert_32b_64b
>
next prev parent reply other threads:[~2021-09-24 5:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-18 6:56 Simei Su
2021-09-24 5:25 ` Zhang, Qi Z [this message]
2021-09-24 9:13 ` Su, Simei
2021-09-26 6:39 ` [dpdk-dev] [PATCH v2] " Simei Su
2021-09-26 7:53 ` [dpdk-dev] [PATCH v3] " Simei Su
2021-09-26 14:04 ` [dpdk-dev] [PATCH v4] " Simei Su
2021-09-27 7:01 ` Zhang, Qi Z
2021-09-28 3:35 ` Zhang, Qi Z
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=03da90dbff9147ef96a5a5858dceaa53@intel.com \
--to=qi.z.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=haiyue.wang@intel.com \
--cc=simei.su@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).