* [dpdk-dev] [PATCH v2] doc: fix testpmd sample qinq flow rules
[not found] <1610623187-3631-1>
@ 2021-01-19 13:00 ` Bernard Iremonger
2021-01-20 1:42 ` Li, Xiaoyun
0 siblings, 1 reply; 3+ messages in thread
From: Bernard Iremonger @ 2021-01-19 13:00 UTC (permalink / raw)
To: dev, xiaoyun.li; +Cc: Bernard Iremonger, stable
In the Testpmd Flow rules management section, correct
the TPID values in the Sample QinQ flow rules sub section.
Also replace the keyword qinq_strip with extend in the
vlan set command.
Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 9be4500..6a00245 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -4426,14 +4426,14 @@ Sample QinQ flow rules
Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
testpmd> port stop 0
- testpmd> vlan set qinq_strip on 0
+ testpmd> vlan set extend on 0
The above command sets the inner and outer TPID's to 0x8100.
To change the TPID's the following commands should be used::
- testpmd> vlan set outer tpid 0xa100 0
- testpmd> vlan set inner tpid 0x9100 0
+ testpmd> vlan set outer tpid 0x88A8 0
+ testpmd> vlan set inner tpid 0x8100 0
testpmd> port start 0
Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.
--
2.7.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-dev] [PATCH v2] doc: fix testpmd sample qinq flow rules
2021-01-19 13:00 ` [dpdk-dev] [PATCH v2] doc: fix testpmd sample qinq flow rules Bernard Iremonger
@ 2021-01-20 1:42 ` Li, Xiaoyun
2021-02-02 9:59 ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit
0 siblings, 1 reply; 3+ messages in thread
From: Li, Xiaoyun @ 2021-01-20 1:42 UTC (permalink / raw)
To: Iremonger, Bernard, dev; +Cc: stable
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
> -----Original Message-----
> From: Iremonger, Bernard <bernard.iremonger@intel.com>
> Sent: Tuesday, January 19, 2021 21:01
> To: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com>
> Cc: Iremonger, Bernard <bernard.iremonger@intel.com>; stable@dpdk.org
> Subject: [PATCH v2] doc: fix testpmd sample qinq flow rules
>
> In the Testpmd Flow rules management section, correct the TPID values in the
> Sample QinQ flow rules sub section.
> Also replace the keyword qinq_strip with extend in the vlan set command.
>
> Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands")
> Cc: stable@dpdk.org
>
> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
> ---
> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 9be4500..6a00245 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -4426,14 +4426,14 @@ Sample QinQ flow rules Before creating QinQ
> rule(s) the following commands should be issued to enable QinQ::
>
> testpmd> port stop 0
> - testpmd> vlan set qinq_strip on 0
> + testpmd> vlan set extend on 0
>
> The above command sets the inner and outer TPID's to 0x8100.
>
> To change the TPID's the following commands should be used::
>
> - testpmd> vlan set outer tpid 0xa100 0
> - testpmd> vlan set inner tpid 0x9100 0
> + testpmd> vlan set outer tpid 0x88A8 0
> + testpmd> vlan set inner tpid 0x8100 0
> testpmd> port start 0
>
> Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.
> --
> 2.7.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-dev] [dpdk-stable] [PATCH v2] doc: fix testpmd sample qinq flow rules
2021-01-20 1:42 ` Li, Xiaoyun
@ 2021-02-02 9:59 ` Ferruh Yigit
0 siblings, 0 replies; 3+ messages in thread
From: Ferruh Yigit @ 2021-02-02 9:59 UTC (permalink / raw)
To: Li, Xiaoyun, Iremonger, Bernard, dev; +Cc: stable
On 1/20/2021 1:42 AM, Li, Xiaoyun wrote:
>> -----Original Message-----
>> From: Iremonger, Bernard <bernard.iremonger@intel.com>
>> Sent: Tuesday, January 19, 2021 21:01
>> To: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com>
>> Cc: Iremonger, Bernard <bernard.iremonger@intel.com>; stable@dpdk.org
>> Subject: [PATCH v2] doc: fix testpmd sample qinq flow rules
>>
>> In the Testpmd Flow rules management section, correct the TPID values in the
>> Sample QinQ flow rules sub section.
>> Also replace the keyword qinq_strip with extend in the vlan set command.
>>
>> Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands")
>> Cc: stable@dpdk.org
>>
>> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
>
> Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
>
Applied to dpdk-next-net/main, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-02-02 10:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1610623187-3631-1>
2021-01-19 13:00 ` [dpdk-dev] [PATCH v2] doc: fix testpmd sample qinq flow rules Bernard Iremonger
2021-01-20 1:42 ` Li, Xiaoyun
2021-02-02 9:59 ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).