From: Ferruh Yigit <ferruh.yigit@intel.com>
To: kkanas@marvell.com, dev@dpdk.org
Cc: declan.doherty@intel.com, Chas Williams <chas3@att.com>
Subject: Re: [dpdk-dev] [PATCH] net/bonding: fix test bonding MAC assignment
Date: Mon, 29 Apr 2019 15:56:37 +0100 [thread overview]
Message-ID: <124dad47-edb3-843c-e83d-359d408f050c@intel.com> (raw)
In-Reply-To: <20190426223029.23677-1-kkanas@marvell.com>
On 4/26/2019 11:30 PM, kkanas@marvell.com wrote:
> From: Krzysztof Kanas <kkanas@marvell.com>
>
> Fix test_set_bonded_port_initialization_mac_assignment so that it works
> after 're run' test_link_bonding.
>
> Fixes: f2ef6f21ee2e ("bond: fix mac assignment to slaves")
> Cc: declan.doherty@intel.com
>
> Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
cc'ed maintainer, Chas.
> ---
> app/test/test_link_bonding.c | 53 +++++++++++++++++++++---------------
> 1 file changed, 31 insertions(+), 22 deletions(-)
>
> diff --git a/app/test/test_link_bonding.c b/app/test/test_link_bonding.c
> index 0fe1d78eb0f5..c00ec6c445bd 100644
> --- a/app/test/test_link_bonding.c
> +++ b/app/test/test_link_bonding.c
> @@ -201,6 +201,7 @@ configure_ethdev(uint16_t port_id, uint8_t start, uint8_t en_isr)
> }
>
> static int slaves_initialized;
> +static int mac_slaves_initialized;
>
> static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
> static pthread_cond_t cvar = PTHREAD_COND_INITIALIZER;
> @@ -873,10 +874,11 @@ test_set_explicit_bonded_mac(void)
> static int
> test_set_bonded_port_initialization_mac_assignment(void)
> {
> - int i, slave_count, bonded_port_id;
> + int i, slave_count;
>
> uint16_t slaves[RTE_MAX_ETHPORTS];
> - int slave_port_ids[BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT];
> + static int bonded_port_id = -1;
> + static int slave_port_ids[BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT];
>
> struct ether_addr slave_mac_addr, bonded_mac_addr, read_mac_addr;
>
> @@ -887,42 +889,49 @@ test_set_bonded_port_initialization_mac_assignment(void)
> /*
> * 1. a - Create / configure bonded / slave ethdevs
> */
> - bonded_port_id = rte_eth_bond_create("net_bonding_mac_ass_test",
> - BONDING_MODE_ACTIVE_BACKUP, rte_socket_id());
> - TEST_ASSERT(bonded_port_id > 0, "failed to create bonded device");
> + if (bonded_port_id == -1) {
> + bonded_port_id = rte_eth_bond_create("net_bonding_mac_ass_test",
> + BONDING_MODE_ACTIVE_BACKUP, rte_socket_id());
> + TEST_ASSERT(bonded_port_id > 0, "failed to create bonded device");
>
> - TEST_ASSERT_SUCCESS(configure_ethdev(bonded_port_id, 0, 0),
> - "Failed to configure bonded ethdev");
> + TEST_ASSERT_SUCCESS(configure_ethdev(bonded_port_id, 0, 0),
> + "Failed to configure bonded ethdev");
> + }
>
> - for (i = 0; i < BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT; i++) {
> - char pmd_name[RTE_ETH_NAME_MAX_LEN];
> + if (!mac_slaves_initialized) {
>
> - slave_mac_addr.addr_bytes[ETHER_ADDR_LEN-1] = i + 100;
> + for (i = 0; i < BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT; i++) {
> + char pmd_name[RTE_ETH_NAME_MAX_LEN];
>
> - snprintf(pmd_name, RTE_ETH_NAME_MAX_LEN, "eth_slave_%d", i);
> + slave_mac_addr.addr_bytes[ETHER_ADDR_LEN-1] = i + 100;
>
> - slave_port_ids[i] = virtual_ethdev_create(pmd_name,
> - &slave_mac_addr, rte_socket_id(), 1);
> + snprintf(pmd_name, RTE_ETH_NAME_MAX_LEN,
> + "eth_slave_%d", i);
>
> - TEST_ASSERT(slave_port_ids[i] >= 0,
> - "Failed to create slave ethdev %s", pmd_name);
> + slave_port_ids[i] = virtual_ethdev_create(pmd_name,
> + &slave_mac_addr, rte_socket_id(), 1);
>
> - TEST_ASSERT_SUCCESS(configure_ethdev(slave_port_ids[i], 1, 0),
> - "Failed to configure virtual ethdev %s",
> - pmd_name);
> - }
> + TEST_ASSERT(slave_port_ids[i] >= 0,
> + "Failed to create slave ethdev %s",
> + pmd_name);
>
> + TEST_ASSERT_SUCCESS(configure_ethdev(
> + slave_port_ids[i], 1, 0),
> + "Failed to configure virtual ethdev %s",
> + pmd_name);
> + }
>
> + mac_slaves_initialized = 1;
> + }
> /*
> - * 2. Add slave ethdevs to bonded device
> - */
> + * 2. Add slave ethdevs to bonded device
> + */
> for (i = 0; i < BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT; i++) {
> TEST_ASSERT_SUCCESS(rte_eth_bond_slave_add(bonded_port_id,
> slave_port_ids[i]),
> "Failed to add slave (%d) to bonded port (%d).",
> slave_port_ids[i], bonded_port_id);
> }
> -
> slave_count = rte_eth_bond_slaves_get(bonded_port_id, slaves,
> RTE_MAX_ETHPORTS);
> TEST_ASSERT_EQUAL(BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT, slave_count,
>
next prev parent reply other threads:[~2019-04-29 14:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-26 22:30 kkanas
2019-04-26 22:30 ` kkanas
2019-04-29 14:56 ` Ferruh Yigit [this message]
2019-04-29 14:56 ` Ferruh Yigit
2019-04-29 16:45 ` Chas Williams
2019-04-29 16:45 ` Chas Williams
2019-04-30 11:25 ` Ferruh Yigit
2019-04-30 11:25 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=124dad47-edb3-843c-e83d-359d408f050c@intel.com \
--to=ferruh.yigit@intel.com \
--cc=chas3@att.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=kkanas@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).