[dpdk-dev] [PATCH 0/6] Some updates for virtio guide

[dpdk-dev] [PATCH 0/6] Some updates for virtio guide

[Tiwei Bie]

Tiwei Bie (6):
  net/virtio: remove remaining simple Tx related stuff
  doc: fix typo in virtio in-order Rx function name
  doc: update the description for in-order Rx path
  doc: document the devargs for virtio-user
  doc: document packed virtqueue for virtio
  doc: fix format for virtio guide

 doc/guides/nics/virtio.rst         | 118 ++++++++++++++++++++---------
 drivers/net/virtio/virtio_ethdev.h |   3 -
 2 files changed, 84 insertions(+), 37 deletions(-)

-- 
2.17.1

[dpdk-dev] [PATCH 1/6] net/virtio: remove remaining simple Tx related stuff

[Tiwei Bie]

The simple Tx path in virtio has been removed in below commit.
This patch removes an undefined function declaration of simple
Tx and all related descriptions in the doc.

Fixes: 57f818963d80 ("net/virtio: remove simple Tx path")
Cc: stable@dpdk.org

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
---
 doc/guides/nics/virtio.rst         | 15 ++-------------
 drivers/net/virtio/virtio_ethdev.h |  3 ---
 2 files changed, 2 insertions(+), 16 deletions(-)

diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
index 2ae875cb4..da9cd6ba6 100644
--- a/doc/guides/nics/virtio.rst
+++ b/doc/guides/nics/virtio.rst
@@ -201,7 +201,7 @@ The packet transmission flow is:
 Virtio PMD Rx/Tx Callbacks
 --------------------------
 
-Virtio driver has 4 Rx callbacks and 3 Tx callbacks.
+Virtio driver has 4 Rx callbacks and 2 Tx callbacks.
 
 Rx callbacks:
 
@@ -223,9 +223,6 @@ Tx callbacks:
 #. ``virtio_xmit_pkts``:
    Regular version.
 
-#. ``virtio_xmit_pkts_simple``:
-   Vector version fixes the available ring indexes to optimize performance.
-
 #. ``virtio_xmit_pkts_inorder``:
    In-order version.
 
@@ -239,25 +236,17 @@ By default, the non-vector callbacks are used:
 
 Vector callbacks will be used when:
 
-*   ``txmode.offloads`` is set to ``0x0``, which implies:
-
-    *   Single segment is specified.
-
-    *   No offload support is needed.
-
 *   Mergeable Rx buffers is disabled.
 
 The corresponding callbacks are:
 
 *   For Rx: ``virtio_recv_pkts_vec``.
 
-*   For Tx: ``virtio_xmit_pkts_simple``.
-
 
 Example of using the vector version of the virtio poll mode driver in
 ``testpmd``::
 
-   testpmd -l 0-2 -n 4 -- -i --tx-offloads=0x0 --rxq=1 --txq=1 --nb-cores=1
+   testpmd -l 0-2 -n 4 -- -i --rxq=1 --txq=1 --nb-cores=1
 
 In-order callbacks only work on simulated virtio user vdev.
 
diff --git a/drivers/net/virtio/virtio_ethdev.h b/drivers/net/virtio/virtio_ethdev.h
index 20d331795..a10111758 100644
--- a/drivers/net/virtio/virtio_ethdev.h
+++ b/drivers/net/virtio/virtio_ethdev.h
@@ -103,9 +103,6 @@ uint16_t virtio_xmit_pkts_inorder(void *tx_queue, struct rte_mbuf **tx_pkts,
 uint16_t virtio_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
 		uint16_t nb_pkts);
 
-uint16_t virtio_xmit_pkts_simple(void *tx_queue, struct rte_mbuf **tx_pkts,
-		uint16_t nb_pkts);
-
 int eth_virtio_dev_init(struct rte_eth_dev *eth_dev);
 
 void virtio_interrupt_handler(void *param);
-- 
2.17.1

Re: [dpdk-dev] [PATCH 1/6] net/virtio: remove remaining simple Tx related stuff

[Maxime Coquelin]

On 8/13/19 4:07 AM, Tiwei Bie wrote:
> The simple Tx path in virtio has been removed in below commit.
> This patch removes an undefined function declaration of simple
> Tx and all related descriptions in the doc.
> 
> Fixes: 57f818963d80 ("net/virtio: remove simple Tx path")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
> ---
>  doc/guides/nics/virtio.rst         | 15 ++-------------
>  drivers/net/virtio/virtio_ethdev.h |  3 ---
>  2 files changed, 2 insertions(+), 16 deletions(-)
> 

Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

[dpdk-dev] [PATCH 2/6] doc: fix typo in virtio in-order Rx function name

[Tiwei Bie]

The Rx function that will be used when in-order is enabled
should be virtio_recv_mergeable_pkts_inorder() instead of
virtio_xmit_pkts_inorder().

Fixes: 8f3bd7e8702d ("net/virtio: add in-order Rx/Tx into selection")
Cc: stable@dpdk.org

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
---
 doc/guides/nics/virtio.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
index da9cd6ba6..08438d064 100644
--- a/doc/guides/nics/virtio.rst
+++ b/doc/guides/nics/virtio.rst
@@ -251,7 +251,7 @@ Example of using the vector version of the virtio poll mode driver in
 In-order callbacks only work on simulated virtio user vdev.
 
 *   For Rx: If mergeable Rx buffers is enabled and in-order is enabled then
-    ``virtio_xmit_pkts_inorder`` is used.
+    ``virtio_recv_mergeable_pkts_inorder`` is used.
 
 *   For Tx: If in-order is enabled then ``virtio_xmit_pkts_inorder`` is used.
 
-- 
2.17.1

Re: [dpdk-dev] [PATCH 2/6] doc: fix typo in virtio in-order Rx function name

[Maxime Coquelin]

On 8/13/19 4:07 AM, Tiwei Bie wrote:
> The Rx function that will be used when in-order is enabled
> should be virtio_recv_mergeable_pkts_inorder() instead of
> virtio_xmit_pkts_inorder().
> 
> Fixes: 8f3bd7e8702d ("net/virtio: add in-order Rx/Tx into selection")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
> ---
>  doc/guides/nics/virtio.rst | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

[dpdk-dev] [PATCH 3/6] doc: update the description for in-order Rx path

[Tiwei Bie]

The virtio_recv_mergeable_pkts_inorder() has been renamed to
virtio_recv_pkts_inorder() and added the non-mergeable support
in below commit.

Fixes: efcda13648d2 ("net/virtio: add non-mergeable support to in-order path")
Cc: stable@dpdk.org

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
---
 doc/guides/nics/virtio.rst | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
index 08438d064..b3c356856 100644
--- a/doc/guides/nics/virtio.rst
+++ b/doc/guides/nics/virtio.rst
@@ -215,8 +215,8 @@ Rx callbacks:
    Vector version without mergeable Rx buffer support, also fixes the available
    ring indexes and uses vector instructions to optimize performance.
 
-#. ``virtio_recv_mergeable_pkts_inorder``:
-   In-order version with mergeable Rx buffer support.
+#. ``virtio_recv_pkts_inorder``:
+   In-order version with mergeable and non-mergeable Rx buffer support.
 
 Tx callbacks:
 
@@ -250,8 +250,7 @@ Example of using the vector version of the virtio poll mode driver in
 
 In-order callbacks only work on simulated virtio user vdev.
 
-*   For Rx: If mergeable Rx buffers is enabled and in-order is enabled then
-    ``virtio_recv_mergeable_pkts_inorder`` is used.
+*   For Rx: If in-order is enabled then ``virtio_recv_pkts_inorder`` is used.
 
 *   For Tx: If in-order is enabled then ``virtio_xmit_pkts_inorder`` is used.
 
-- 
2.17.1

Re: [dpdk-dev] [PATCH 3/6] doc: update the description for in-order Rx path

[Maxime Coquelin]

On 8/13/19 4:07 AM, Tiwei Bie wrote:
> The virtio_recv_mergeable_pkts_inorder() has been renamed to
> virtio_recv_pkts_inorder() and added the non-mergeable support
> in below commit.
> 
> Fixes: efcda13648d2 ("net/virtio: add non-mergeable support to in-order path")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
> ---
>  doc/guides/nics/virtio.rst | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)

Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

[dpdk-dev] [PATCH 4/6] doc: document the devargs for virtio-user

[Tiwei Bie]

Document the devargs for virtio-user and also make it clear
that these devargs are only available in virtio-user, i.e. not
supported by the PCI virtio driver.

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
---
 doc/guides/nics/virtio.rst | 38 +++++++++++++++++++++++++++++++++++---
 1 file changed, 35 insertions(+), 3 deletions(-)

diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
index b3c356856..993e691f5 100644
--- a/doc/guides/nics/virtio.rst
+++ b/doc/guides/nics/virtio.rst
@@ -322,7 +322,7 @@ Here we use l3fwd-power as an example to show how to get started.
 Virtio PMD arguments
 --------------------
 
-The user can specify below argument in devargs.
+Below devargs are supported by the PCI virtio driver:
 
 #.  ``vdpa``:
 
@@ -331,12 +331,44 @@ The user can specify below argument in devargs.
     a virtio device needs to work in vDPA mode.
     (Default: 0 (disabled))
 
-#. ``mrg_rxbuf``:
+Below devargs are supported by the virtio-user vdev:
+
+#.  ``path``:
+
+    It is used to specify a path to connect to vhost backend.
+
+#.  ``mac``:
+
+    It is used to specify the MAC address.
+
+#.  ``cq``:
+
+    It is used to enable the control queue. (Default: 0 (disabled))
+
+#.  ``queue_size``:
+
+    It is used to specify the queue size. (Default: 256)
+
+#.  ``queues``:
+
+    It is used to specify the queue number. (Default: 1)
+
+#.  ``iface``:
+
+    It is used to specify the host interface name for vhost-kernel
+    backend.
+
+#.  ``server``:
+
+    It is used to enable the server mode when using vhost-user backend.
+    (Default: 0 (disabled))
+
+#.  ``mrg_rxbuf``:
 
     It is used to enable virtio device mergeable Rx buffer feature.
     (Default: 1 (enabled))
 
-#. ``in_order``:
+#.  ``in_order``:
 
     It is used to enable virtio device in-order feature.
     (Default: 1 (enabled))
-- 
2.17.1

Re: [dpdk-dev] [PATCH 4/6] doc: document the devargs for virtio-user

[Maxime Coquelin]

On 8/13/19 4:07 AM, Tiwei Bie wrote:
> Document the devargs for virtio-user and also make it clear
> that these devargs are only available in virtio-user, i.e. not
> supported by the PCI virtio driver.
> 
> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
> ---
>  doc/guides/nics/virtio.rst | 38 +++++++++++++++++++++++++++++++++++---
>  1 file changed, 35 insertions(+), 3 deletions(-)

Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

[dpdk-dev] [PATCH 5/6] doc: document packed virtqueue for virtio

[Tiwei Bie]

Document the packed virtqueue layout support in virtio net PMD.

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
---
 doc/guides/nics/virtio.rst | 63 ++++++++++++++++++++++++++++----------
 1 file changed, 47 insertions(+), 16 deletions(-)

diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
index 993e691f5..011954ff6 100644
--- a/doc/guides/nics/virtio.rst
+++ b/doc/guides/nics/virtio.rst
@@ -24,15 +24,19 @@ standard qemu vhost back end and vhost kni back end.
 Virtio Implementation in DPDK
 -----------------------------
 
-For details about the virtio spec, refer to Virtio PCI Card Specification written by Rusty Russell.
+For details about the virtio spec, refer to the latest
+`VIRTIO (Virtual I/O) Device Specification
+<https://www.oasis-open.org/committees/tc_home.php?wg_abbrev=virtio>`_.
 
-As a PMD, virtio provides packet reception and transmission callbacks virtio_recv_pkts and virtio_xmit_pkts.
+As a PMD, virtio provides packet reception and transmission callbacks.
 
-In virtio_recv_pkts, index in range [vq->vq_used_cons_idx , vq->vq_ring.used->idx) in vring is available for virtio to burst out.
+In Rx, packets described by the used descriptors in vring are available
+for virtio to burst out.
 
-In virtio_xmit_pkts, same index range in vring is available for virtio to clean.
-Virtio will enqueue to be transmitted packets into vring, advance the vq->vq_ring.avail->idx,
-and then notify the host back end if necessary.
+In Tx, packets described by the used descriptors in vring are available
+for virtio to clean. Virtio will enqueue to be transmitted packets into
+vring, make them available to the device, and then notify the host back
+end if necessary.
 
 Features and Limitations of virtio PMD
 --------------------------------------
@@ -201,37 +205,52 @@ The packet transmission flow is:
 Virtio PMD Rx/Tx Callbacks
 --------------------------
 
-Virtio driver has 4 Rx callbacks and 2 Tx callbacks.
+Virtio driver has 6 Rx callbacks and 3 Tx callbacks.
 
 Rx callbacks:
 
 #. ``virtio_recv_pkts``:
-   Regular version without mergeable Rx buffer support.
+   Regular version without mergeable Rx buffer support for split virtqueue.
 
 #. ``virtio_recv_mergeable_pkts``:
-   Regular version with mergeable Rx buffer support.
+   Regular version with mergeable Rx buffer support for split virtqueue.
 
 #. ``virtio_recv_pkts_vec``:
    Vector version without mergeable Rx buffer support, also fixes the available
-   ring indexes and uses vector instructions to optimize performance.
+   ring indexes and uses vector instructions to optimize performance for split
+   virtqueue.
 
 #. ``virtio_recv_pkts_inorder``:
-   In-order version with mergeable and non-mergeable Rx buffer support.
+   In-order version with mergeable and non-mergeable Rx buffer support
+   for split virtqueue.
+
+#. ``virtio_recv_pkts_packed``:
+   Regular and in-order version without mergeable Rx buffer support for
+   packed virtqueue.
+
+#. ``virtio_recv_mergeable_pkts_packed``:
+   Regular and in-order version with mergeable Rx buffer support for packed
+   virtqueue.
 
 Tx callbacks:
 
 #. ``virtio_xmit_pkts``:
-   Regular version.
+   Regular version for split virtqueue.
 
 #. ``virtio_xmit_pkts_inorder``:
-   In-order version.
+   In-order version for split virtqueue.
+
+#. ``virtio_xmit_pkts_packed``:
+   Regular and in-order version for packed virtqueue.
 
 By default, the non-vector callbacks are used:
 
-*   For Rx: If mergeable Rx buffers is disabled then ``virtio_recv_pkts`` is
-    used; otherwise ``virtio_recv_mergeable_pkts``.
+*   For Rx: If mergeable Rx buffers is disabled then ``virtio_recv_pkts``
+    or ``virtio_recv_pkts_packed`` will be used, otherwise
+    ``virtio_recv_mergeable_pkts`` or ``virtio_recv_mergeable_pkts_packed``
+    will be used.
 
-*   For Tx: ``virtio_xmit_pkts``.
+*   For Tx: ``virtio_xmit_pkts`` or ``virtio_xmit_pkts_packed`` will be used.
 
 
 Vector callbacks will be used when:
@@ -242,6 +261,8 @@ The corresponding callbacks are:
 
 *   For Rx: ``virtio_recv_pkts_vec``.
 
+There is no vector callbacks for packed virtqueue for now.
+
 
 Example of using the vector version of the virtio poll mode driver in
 ``testpmd``::
@@ -250,10 +271,15 @@ Example of using the vector version of the virtio poll mode driver in
 
 In-order callbacks only work on simulated virtio user vdev.
 
+For split virtqueue:
+
 *   For Rx: If in-order is enabled then ``virtio_recv_pkts_inorder`` is used.
 
 *   For Tx: If in-order is enabled then ``virtio_xmit_pkts_inorder`` is used.
 
+For packed virtqueue, the default callbacks already support the
+in-order feature.
+
 Interrupt mode
 --------------
 
@@ -372,3 +398,8 @@ Below devargs are supported by the virtio-user vdev:
 
     It is used to enable virtio device in-order feature.
     (Default: 1 (enabled))
+
+#.  ``packed_vq``:
+
+    It is used to enable virtio device packed virtqueue feature.
+    (Default: 0 (disabled))
-- 
2.17.1

Re: [dpdk-dev] [PATCH 5/6] doc: document packed virtqueue for virtio

[Maxime Coquelin]

On 8/13/19 4:07 AM, Tiwei Bie wrote:
> Document the packed virtqueue layout support in virtio net PMD.
> 
> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
> ---
>  doc/guides/nics/virtio.rst | 63 ++++++++++++++++++++++++++++----------
>  1 file changed, 47 insertions(+), 16 deletions(-)
> 
> diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
> index 993e691f5..011954ff6 100644
> --- a/doc/guides/nics/virtio.rst
> +++ b/doc/guides/nics/virtio.rst
> @@ -24,15 +24,19 @@ standard qemu vhost back end and vhost kni back end.
>  Virtio Implementation in DPDK
>  -----------------------------
>  
> -For details about the virtio spec, refer to Virtio PCI Card Specification written by Rusty Russell.
> +For details about the virtio spec, refer to the latest
> +`VIRTIO (Virtual I/O) Device Specification
> +<https://www.oasis-open.org/committees/tc_home.php?wg_abbrev=virtio>`_.
>  
> -As a PMD, virtio provides packet reception and transmission callbacks virtio_recv_pkts and virtio_xmit_pkts.
> +As a PMD, virtio provides packet reception and transmission callbacks.
>  
> -In virtio_recv_pkts, index in range [vq->vq_used_cons_idx , vq->vq_ring.used->idx) in vring is available for virtio to burst out.
> +In Rx, packets described by the used descriptors in vring are available
> +for virtio to burst out.
>  
> -In virtio_xmit_pkts, same index range in vring is available for virtio to clean.
> -Virtio will enqueue to be transmitted packets into vring, advance the vq->vq_ring.avail->idx,
> -and then notify the host back end if necessary.
> +In Tx, packets described by the used descriptors in vring are available
> +for virtio to clean. Virtio will enqueue to be transmitted packets into
> +vring, make them available to the device, and then notify the host back
> +end if necessary.
>  
>  Features and Limitations of virtio PMD
>  --------------------------------------
> @@ -201,37 +205,52 @@ The packet transmission flow is:
>  Virtio PMD Rx/Tx Callbacks
>  --------------------------
>  
> -Virtio driver has 4 Rx callbacks and 2 Tx callbacks.
> +Virtio driver has 6 Rx callbacks and 3 Tx callbacks.
>  
>  Rx callbacks:
>  
>  #. ``virtio_recv_pkts``:
> -   Regular version without mergeable Rx buffer support.
> +   Regular version without mergeable Rx buffer support for split virtqueue.
>  
>  #. ``virtio_recv_mergeable_pkts``:
> -   Regular version with mergeable Rx buffer support.
> +   Regular version with mergeable Rx buffer support for split virtqueue.
>  
>  #. ``virtio_recv_pkts_vec``:
>     Vector version without mergeable Rx buffer support, also fixes the available
> -   ring indexes and uses vector instructions to optimize performance.
> +   ring indexes and uses vector instructions to optimize performance for split
> +   virtqueue.
>  
>  #. ``virtio_recv_pkts_inorder``:
> -   In-order version with mergeable and non-mergeable Rx buffer support.
> +   In-order version with mergeable and non-mergeable Rx buffer support
> +   for split virtqueue.
> +
> +#. ``virtio_recv_pkts_packed``:
> +   Regular and in-order version without mergeable Rx buffer support for
> +   packed virtqueue.
> +
> +#. ``virtio_recv_mergeable_pkts_packed``:
> +   Regular and in-order version with mergeable Rx buffer support for packed
> +   virtqueue.
>  
>  Tx callbacks:
>  
>  #. ``virtio_xmit_pkts``:
> -   Regular version.
> +   Regular version for split virtqueue.
>  
>  #. ``virtio_xmit_pkts_inorder``:
> -   In-order version.
> +   In-order version for split virtqueue.
> +
> +#. ``virtio_xmit_pkts_packed``:
> +   Regular and in-order version for packed virtqueue.
>  
>  By default, the non-vector callbacks are used:
>  
> -*   For Rx: If mergeable Rx buffers is disabled then ``virtio_recv_pkts`` is
> -    used; otherwise ``virtio_recv_mergeable_pkts``.
> +*   For Rx: If mergeable Rx buffers is disabled then ``virtio_recv_pkts``
> +    or ``virtio_recv_pkts_packed`` will be used, otherwise
> +    ``virtio_recv_mergeable_pkts`` or ``virtio_recv_mergeable_pkts_packed``
> +    will be used.
>  
> -*   For Tx: ``virtio_xmit_pkts``.
> +*   For Tx: ``virtio_xmit_pkts`` or ``virtio_xmit_pkts_packed`` will be used.
>  
>  
>  Vector callbacks will be used when:
> @@ -242,6 +261,8 @@ The corresponding callbacks are:
>  
>  *   For Rx: ``virtio_recv_pkts_vec``.
>  
> +There is no vector callbacks for packed virtqueue for now.
> +
>  
>  Example of using the vector version of the virtio poll mode driver in
>  ``testpmd``::
> @@ -250,10 +271,15 @@ Example of using the vector version of the virtio poll mode driver in
>  
>  In-order callbacks only work on simulated virtio user vdev.
>  
> +For split virtqueue:
> +
>  *   For Rx: If in-order is enabled then ``virtio_recv_pkts_inorder`` is used.
>  
>  *   For Tx: If in-order is enabled then ``virtio_xmit_pkts_inorder`` is used.
>  
> +For packed virtqueue, the default callbacks already support the
> +in-order feature.
> +
>  Interrupt mode
>  --------------
>  
> @@ -372,3 +398,8 @@ Below devargs are supported by the virtio-user vdev:
>  
>      It is used to enable virtio device in-order feature.
>      (Default: 1 (enabled))
> +
> +#.  ``packed_vq``:
> +
> +    It is used to enable virtio device packed virtqueue feature.
> +    (Default: 0 (disabled))
> 

Side note: One day, we may consider to enable it by default.

Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

[dpdk-dev] [PATCH 6/6] doc: fix format for virtio guide

[Tiwei Bie]

This patch removes an unwanted empty line in a sentence.

Fixes: 71afcefbd53e ("doc: update virtio ring size and header size")
Cc: stable@dpdk.org

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
---
 doc/guides/nics/virtio.rst | 1 -
 1 file changed, 1 deletion(-)

diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
index 011954ff6..bd0116176 100644
--- a/doc/guides/nics/virtio.rst
+++ b/doc/guides/nics/virtio.rst
@@ -7,7 +7,6 @@ Poll Mode Driver for Emulated Virtio NIC
 Virtio is a para-virtualization framework initiated by IBM, and supported by KVM hypervisor.
 In the Data Plane Development Kit (DPDK),
 we provide a virtio Poll Mode Driver (PMD) as a software solution, comparing to SRIOV hardware solution,
-
 for fast guest VM to guest VM communication and guest VM to host communication.
 
 Vhost is a kernel acceleration module for virtio qemu backend.
-- 
2.17.1

Re: [dpdk-dev] [PATCH 6/6] doc: fix format for virtio guide

[Maxime Coquelin]

On 8/13/19 4:07 AM, Tiwei Bie wrote:
> This patch removes an unwanted empty line in a sentence.
> 
> Fixes: 71afcefbd53e ("doc: update virtio ring size and header size")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
> ---
>  doc/guides/nics/virtio.rst | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
> index 011954ff6..bd0116176 100644
> --- a/doc/guides/nics/virtio.rst
> +++ b/doc/guides/nics/virtio.rst
> @@ -7,7 +7,6 @@ Poll Mode Driver for Emulated Virtio NIC
>  Virtio is a para-virtualization framework initiated by IBM, and supported by KVM hypervisor.
>  In the Data Plane Development Kit (DPDK),
>  we provide a virtio Poll Mode Driver (PMD) as a software solution, comparing to SRIOV hardware solution,
> -
>  for fast guest VM to guest VM communication and guest VM to host communication.
>  
>  Vhost is a kernel acceleration module for virtio qemu backend.
> 

Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

Re: [dpdk-dev] [PATCH 0/6] Some updates for virtio guide

[Maxime Coquelin]

On 8/13/19 4:07 AM, Tiwei Bie wrote:
> Tiwei Bie (6):
>   net/virtio: remove remaining simple Tx related stuff
>   doc: fix typo in virtio in-order Rx function name
>   doc: update the description for in-order Rx path
>   doc: document the devargs for virtio-user
>   doc: document packed virtqueue for virtio
>   doc: fix format for virtio guide
> 
>  doc/guides/nics/virtio.rst         | 118 ++++++++++++++++++++---------
>  drivers/net/virtio/virtio_ethdev.h |   3 -
>  2 files changed, 84 insertions(+), 37 deletions(-)
> 

Series applied to dpdk-next-virtio.

Thanks for taking care of the doc!
Maxime