From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga09.intel.com (mga09.intel.com [134.134.136.24]) by dpdk.org (Postfix) with ESMTP id F2A34CA24 for ; Sat, 27 Jun 2015 04:36:50 +0200 (CEST) Received: from orsmga003.jf.intel.com ([10.7.209.27]) by orsmga102.jf.intel.com with ESMTP; 26 Jun 2015 19:36:50 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.13,687,1427785200"; d="scan'208";a="595623831" Received: from lwang14-mobl6.amr.corp.intel.com ([10.127.184.59]) by orsmga003.jf.intel.com with ESMTP; 26 Jun 2015 19:36:49 -0700 From: Liang-Min Larry Wang To: dev@dpdk.org Date: Fri, 26 Jun 2015 22:36:42 -0400 Message-Id: <1435372605-8792-2-git-send-email-liang-min.wang@intel.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1435372605-8792-1-git-send-email-liang-min.wang@intel.com> References: <1432946276-9424-1-git-send-email-liang-min.wang@intel.com> <1435372605-8792-1-git-send-email-liang-min.wang@intel.com> Cc: Liang-Min Larry Wang Subject: [dpdk-dev] [PATCH v10 1/4] ethdev: add apis to support access device info X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: patches and discussions about DPDK List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 27 Jun 2015 02:36:51 -0000 add new apis: - rte_eth_dev_default_mac_addr_set - rte_eth_dev_reg_length - rte_eth_dev_reg_info - rte_eth_dev_eeprom_length - rte_eth_dev_get_eeprom - rte_eth_dev_set_eeprom to enable reading device parameters (mac-addr, register, eeprom) based upon ethtool alike data parameter specification. Signed-off-by: Liang-Min Larry Wang --- lib/librte_ether/Makefile | 1 + lib/librte_ether/rte_eth_dev_info.h | 57 ++++++++++++++++ lib/librte_ether/rte_ethdev.c | 99 ++++++++++++++++++++++++++++ lib/librte_ether/rte_ethdev.h | 117 +++++++++++++++++++++++++++++++++ lib/librte_ether/rte_ether_version.map | 6 ++ 5 files changed, 280 insertions(+) create mode 100644 lib/librte_ether/rte_eth_dev_info.h diff --git a/lib/librte_ether/Makefile b/lib/librte_ether/Makefile index c0e5768..05209e9 100644 --- a/lib/librte_ether/Makefile +++ b/lib/librte_ether/Makefile @@ -51,6 +51,7 @@ SRCS-y += rte_ethdev.c SYMLINK-y-include += rte_ether.h SYMLINK-y-include += rte_ethdev.h SYMLINK-y-include += rte_eth_ctrl.h +SYMLINK-y-include += rte_eth_dev_info.h # this lib depends upon: DEPDIRS-y += lib/librte_eal lib/librte_mempool lib/librte_ring lib/librte_mbuf diff --git a/lib/librte_ether/rte_eth_dev_info.h b/lib/librte_ether/rte_eth_dev_info.h new file mode 100644 index 0000000..6848051 --- /dev/null +++ b/lib/librte_ether/rte_eth_dev_info.h @@ -0,0 +1,57 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _RTE_ETH_DEV_INFO_H_ +#define _RTE_ETH_DEV_INFO_H_ + +/* + * Placeholder for accessing device registers + */ +struct rte_dev_reg_info { + void *buf; /**< Buffer for register */ + uint32_t offset; /**< Offset for 1st register to fetch */ + uint32_t leng; /**< Number of registers to fetch */ + uint32_t version; /**< Device version */ +}; + +/* + * Placeholder for accessing device eeprom + */ +struct rte_dev_eeprom_info { + void *buf; /**< Buffer for eeprom */ + uint32_t offset; /**< Offset for 1st eeprom location to access */ + uint32_t leng; /**< Length of eeprom region to access */ + uint32_t magic; /**< Device ID */ +}; + +#endif /* _RTE_ETH_DEV_INFO_H_ */ diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c index 02cd07f..9a33330 100644 --- a/lib/librte_ether/rte_ethdev.c +++ b/lib/librte_ether/rte_ethdev.c @@ -2751,6 +2751,30 @@ rte_eth_dev_mac_addr_remove(uint8_t port_id, struct ether_addr *addr) } int +rte_eth_dev_default_mac_addr_set(uint8_t port_id, struct ether_addr *addr) +{ + struct rte_eth_dev *dev; + + if (!rte_eth_dev_is_valid_port(port_id)) { + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); + return -ENODEV; + } + + if (!is_valid_assigned_ether_addr(addr)) + return -EINVAL; + + dev = &rte_eth_devices[port_id]; + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mac_addr_set, -ENOTSUP); + + /* Update default address in NIC data structure */ + ether_addr_copy(addr, &dev->data->mac_addrs[0]); + + (*dev->dev_ops->mac_addr_set)(dev, addr); + + return 0; +} + +int rte_eth_dev_set_vf_rxmode(uint8_t port_id, uint16_t vf, uint16_t rx_mode, uint8_t on) { @@ -3644,3 +3668,78 @@ rte_eth_dev_set_mc_addr_list(uint8_t port_id, FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_mc_addr_list, -ENOTSUP); return dev->dev_ops->set_mc_addr_list(dev, mc_addr_set, nb_mc_addr); } + +int +rte_eth_dev_reg_length(uint8_t port_id) +{ + struct rte_eth_dev *dev; + + if (!rte_eth_dev_is_valid_port(port_id)) { + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); + return -ENODEV; + } + + dev = &rte_eth_devices[port_id]; + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_reg_length, -ENOTSUP); + return (*dev->dev_ops->get_reg_length)(dev); +} + +int +rte_eth_dev_reg_info(uint8_t port_id, struct rte_dev_reg_info *info) +{ + struct rte_eth_dev *dev; + + if (!rte_eth_dev_is_valid_port(port_id)) { + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); + return -ENODEV; + } + + dev = &rte_eth_devices[port_id]; + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_reg, -ENOTSUP); + return (*dev->dev_ops->get_reg)(dev, info); +} + +int +rte_eth_dev_eeprom_length(uint8_t port_id) +{ + struct rte_eth_dev *dev; + + if (!rte_eth_dev_is_valid_port(port_id)) { + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); + return -ENODEV; + } + + dev = &rte_eth_devices[port_id]; + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_eeprom_length, -ENOTSUP); + return (*dev->dev_ops->get_eeprom_length)(dev); +} + +int +rte_eth_dev_get_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info) +{ + struct rte_eth_dev *dev; + + if (!rte_eth_dev_is_valid_port(port_id)) { + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); + return -ENODEV; + } + + dev = &rte_eth_devices[port_id]; + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_eeprom, -ENOTSUP); + return (*dev->dev_ops->get_eeprom)(dev, info); +} + +int +rte_eth_dev_set_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info) +{ + struct rte_eth_dev *dev; + + if (!rte_eth_dev_is_valid_port(port_id)) { + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); + return -ENODEV; + } + + dev = &rte_eth_devices[port_id]; + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_eeprom, -ENOTSUP); + return (*dev->dev_ops->set_eeprom)(dev, info); +} diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index f1219ac..94d7be0 100644 --- a/lib/librte_ether/rte_ethdev.h +++ b/lib/librte_ether/rte_ethdev.h @@ -182,6 +182,7 @@ extern "C" { #include #include "rte_ether.h" #include "rte_eth_ctrl.h" +#include "rte_eth_dev_info.h" struct rte_mbuf; @@ -1233,6 +1234,24 @@ typedef int (*eth_set_mc_addr_list_t)(struct rte_eth_dev *dev, uint32_t nb_mc_addr); /**< @internal set the list of multicast addresses on an Ethernet device */ +typedef int (*eth_get_reg_length_t)(struct rte_eth_dev *dev); +/**< @internal Retrieve device register count */ + +typedef int (*eth_get_reg_t)(struct rte_eth_dev *dev, + struct rte_dev_reg_info *info); +/**< @internal Retrieve registers */ + +typedef int (*eth_get_eeprom_length_t)(struct rte_eth_dev *dev); +/**< @internal Retrieve eeprom size */ + +typedef int (*eth_get_eeprom_t)(struct rte_eth_dev *dev, + struct rte_dev_eeprom_info *info); +/**< @internal Retrieve eeprom data */ + +typedef int (*eth_set_eeprom_t)(struct rte_eth_dev *dev, + struct rte_dev_eeprom_info *info); +/**< @internal Program eeprom data */ + #ifdef RTE_NIC_BYPASS enum { @@ -1372,6 +1391,17 @@ struct eth_dev_ops { reta_update_t reta_update; /** Query redirection table. */ reta_query_t reta_query; + + eth_get_reg_length_t get_reg_length; + /**< Get # of registers */ + eth_get_reg_t get_reg; + /**< Get registers */ + eth_get_eeprom_length_t get_eeprom_length; + /**< Get eeprom length */ + eth_get_eeprom_t get_eeprom; + /**< Get eeprom data */ + eth_set_eeprom_t set_eeprom; + /**< Set eeprom */ /* bypass control */ #ifdef RTE_NIC_BYPASS bypass_init_t bypass_init; @@ -2987,6 +3017,20 @@ int rte_eth_dev_mac_addr_add(uint8_t port, struct ether_addr *mac_addr, int rte_eth_dev_mac_addr_remove(uint8_t port, struct ether_addr *mac_addr); /** + * Set the default MAC address. + * + * @param port + * The port identifier of the Ethernet device. + * @param mac_addr + * New default MAC address. + * @return + * - (0) if successful, or *mac_addr* didn't exist. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port* invalid. + */ +int rte_eth_dev_default_mac_addr_set(uint8_t port, struct ether_addr *mac_addr); + +/** * Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device. * * @param port @@ -3616,6 +3660,79 @@ int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id, int rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id, struct rte_eth_rxtx_callback *user_cb); +/** + * Retrieve number of available registers for access + * + * @param port_id + * The port identifier of the Ethernet device. + * @return + * - (>=0) number of registers if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_reg_length(uint8_t port_id); + +/** + * Retrieve device registers and register attributes + * + * @param port_id + * The port identifier of the Ethernet device. + * @param info + * The template includes buffer for register data and attribute to be filled. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_reg_info(uint8_t port_id, struct rte_dev_reg_info *info); + +/** + * Retrieve size of device EEPROM + * + * @param port_id + * The port identifier of the Ethernet device. + * @return + * - (>=0) EEPROM size if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_eeprom_length(uint8_t port_id); + +/** + * Retrieve EEPROM and EEPROM attribute + * + * @param port_id + * The port identifier of the Ethernet device. + * @param info + * The template includes buffer for return EEPROM data and + * EEPROM attributes to be filled. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_get_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info); + +/** + * Program EEPROM with provided data + * + * @param port_id + * The port identifier of the Ethernet device. + * @param info + * The template includes EEPROM data for programming and + * EEPROM attributes to be filled + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_set_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info); + #ifdef __cplusplus } #endif diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map index 012a82e..40d025b 100644 --- a/lib/librte_ether/rte_ether_version.map +++ b/lib/librte_ether/rte_ether_version.map @@ -102,6 +102,12 @@ DPDK_2.0 { rte_eth_tx_queue_setup; rte_eth_xstats_get; rte_eth_xstats_reset; + rte_eth_dev_default_mac_addr_set; + rte_eth_dev_reg_length; + rte_eth_dev_reg_info; + rte_eth_dev_eeprom_length; + rte_eth_dev_get_eeprom; + rte_eth_dev_set_eeprom; local: *; }; -- 2.1.4