From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga03.intel.com (mga03.intel.com [134.134.136.65]) by dpdk.org (Postfix) with ESMTP id B29F28DA8 for ; Tue, 10 Nov 2015 14:48:27 +0100 (CET) Received: from orsmga002.jf.intel.com ([10.7.209.21]) by orsmga103.jf.intel.com with ESMTP; 10 Nov 2015 05:48:26 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.20,270,1444719600"; d="scan'208";a="846974005" Received: from irvmail001.ir.intel.com ([163.33.26.43]) by orsmga002.jf.intel.com with ESMTP; 10 Nov 2015 05:48:26 -0800 Received: from sivswdev01.ir.intel.com (sivswdev01.ir.intel.com [10.237.217.45]) by irvmail001.ir.intel.com (8.14.3/8.13.6/MailSET/Hub) with ESMTP id tAADmP4e021173; Tue, 10 Nov 2015 13:48:25 GMT Received: from sivswdev01.ir.intel.com (localhost [127.0.0.1]) by sivswdev01.ir.intel.com with ESMTP id tAADmPtJ013385; Tue, 10 Nov 2015 13:48:25 GMT Received: (from kananye1@localhost) by sivswdev01.ir.intel.com with id tAADmPo9013381; Tue, 10 Nov 2015 13:48:25 GMT From: Konstantin Ananyev To: dev@dpdk.org Date: Tue, 10 Nov 2015 13:48:20 +0000 Message-Id: <1447163301-13333-2-git-send-email-konstantin.ananyev@intel.com> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1447163301-13333-1-git-send-email-konstantin.ananyev@intel.com> References: <1447163301-13333-1-git-send-email-konstantin.ananyev@intel.com> In-Reply-To: <1440085070-13989-1-git-send-email-vladz@cloudius-systems.com> References: <1440085070-13989-1-git-send-email-vladz@cloudius-systems.com> Subject: [dpdk-dev] [PATCHv7 1/2] testpmd: add ability to split outgoing packets X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: patches and discussions about DPDK List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 10 Nov 2015 13:48:28 -0000 For CSUM forwarding mode add ability to copy & split outgoing packet into the new mbuf that consists of multiple segments. For TXONLY and CSUM forwarding modes add ability to make number of segments in the outgoing packet to vary on a per packet basis. Number of segments and size of each segment is controlled by 'set txpkts' command. Split policy is controlled by 'set txsplit' command. Possible values are: on | off | rand. Tha allows to increase test coverage for TX PMD codepaths. Signed-off-by: Konstantin Ananyev --- app/test-pmd/cmdline.c | 57 +++++++++- app/test-pmd/config.c | 61 +++++++++++ app/test-pmd/csumonly.c | 163 +++++++++++++++++++++++++++- app/test-pmd/testpmd.c | 3 + app/test-pmd/testpmd.h | 10 ++ app/test-pmd/txonly.c | 13 ++- doc/guides/testpmd_app_ug/testpmd_funcs.rst | 21 +++- 7 files changed, 319 insertions(+), 9 deletions(-) v6 changes: - fix typos - testpmd guide: fix invalid command description v7 changes: - move vN changes after the changed file list diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index c637198..a92fe0b 100644 --- a/app/test-pmd/cmdline.c +++ b/app/test-pmd/cmdline.c @@ -199,7 +199,7 @@ static void cmd_help_long_parsed(void *parsed_result, "clear port (info|stats|xstats|fdir|stat_qmap) (port_id|all)\n" " Clear information for port_id, or all.\n\n" - "show config (rxtx|cores|fwd)\n" + "show config (rxtx|cores|fwd|txpkts)\n" " Display the given configuration.\n\n" "read rxd (port_id) (queue_id) (rxd_id)\n" @@ -246,7 +246,12 @@ static void cmd_help_long_parsed(void *parsed_result, "set txpkts (x[,y]*)\n" " Set the length of each segment of TXONLY" - " packets.\n\n" + " and optionally CSUM packets.\n\n" + + "set txsplit (off|on|rand)\n" + " Set the split policy for the TX packets." + " Right now only applicable for CSUM and TXONLY" + " modes\n\n" "set corelist (x[,y]*)\n" " Set the list of forwarding cores.\n\n" @@ -2621,6 +2626,47 @@ cmdline_parse_inst_t cmd_set_txpkts = { }, }; +/* *** SET COPY AND SPLIT POLICY ON TX PACKETS *** */ + +struct cmd_set_txsplit_result { + cmdline_fixed_string_t cmd_keyword; + cmdline_fixed_string_t txsplit; + cmdline_fixed_string_t mode; +}; + +static void +cmd_set_txsplit_parsed(void *parsed_result, + __attribute__((unused)) struct cmdline *cl, + __attribute__((unused)) void *data) +{ + struct cmd_set_txsplit_result *res; + + res = parsed_result; + set_tx_pkt_split(res->mode); +} + +cmdline_parse_token_string_t cmd_set_txsplit_keyword = + TOKEN_STRING_INITIALIZER(struct cmd_set_txsplit_result, + cmd_keyword, "set"); +cmdline_parse_token_string_t cmd_set_txsplit_name = + TOKEN_STRING_INITIALIZER(struct cmd_set_txsplit_result, + txsplit, "txsplit"); +cmdline_parse_token_string_t cmd_set_txsplit_mode = + TOKEN_STRING_INITIALIZER(struct cmd_set_txsplit_result, + mode, NULL); + +cmdline_parse_inst_t cmd_set_txsplit = { + .f = cmd_set_txsplit_parsed, + .data = NULL, + .help_str = "set txsplit on|off|rand", + .tokens = { + (void *)&cmd_set_txsplit_keyword, + (void *)&cmd_set_txsplit_name, + (void *)&cmd_set_txsplit_mode, + NULL, + }, +}; + /* *** ADD/REMOVE ALL VLAN IDENTIFIERS TO/FROM A PORT VLAN RX FILTER *** */ struct cmd_rx_vlan_filter_all_result { cmdline_fixed_string_t rx_vlan; @@ -5233,6 +5279,8 @@ static void cmd_showcfg_parsed(void *parsed_result, fwd_lcores_config_display(); else if (!strcmp(res->what, "fwd")) fwd_config_display(); + else if (!strcmp(res->what, "txpkts")) + show_tx_pkt_segments(); } cmdline_parse_token_string_t cmd_showcfg_show = @@ -5241,12 +5289,12 @@ cmdline_parse_token_string_t cmd_showcfg_port = TOKEN_STRING_INITIALIZER(struct cmd_showcfg_result, cfg, "config"); cmdline_parse_token_string_t cmd_showcfg_what = TOKEN_STRING_INITIALIZER(struct cmd_showcfg_result, what, - "rxtx#cores#fwd"); + "rxtx#cores#fwd#txpkts"); cmdline_parse_inst_t cmd_showcfg = { .f = cmd_showcfg_parsed, .data = NULL, - .help_str = "show config rxtx|cores|fwd", + .help_str = "show config rxtx|cores|fwd|txpkts", .tokens = { (void *)&cmd_showcfg_show, (void *)&cmd_showcfg_port, @@ -9574,6 +9622,7 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_reset, (cmdline_parse_inst_t *)&cmd_set_numbers, (cmdline_parse_inst_t *)&cmd_set_txpkts, + (cmdline_parse_inst_t *)&cmd_set_txsplit, (cmdline_parse_inst_t *)&cmd_set_fwd_list, (cmdline_parse_inst_t *)&cmd_set_fwd_mask, (cmdline_parse_inst_t *)&cmd_set_fwd_mode, diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index 938b456..8ec7d83 100644 --- a/app/test-pmd/config.c +++ b/app/test-pmd/config.c @@ -97,6 +97,24 @@ static char *flowtype_to_str(uint16_t flow_type); +static const struct { + enum tx_pkt_split split; + const char *name; +} tx_split_name[] = { + { + .split = TX_PKT_SPLIT_OFF, + .name = "off", + }, + { + .split = TX_PKT_SPLIT_ON, + .name = "on", + }, + { + .split = TX_PKT_SPLIT_RND, + .name = "rand", + }, +}; + struct rss_type_info { char str[32]; uint64_t rss_type; @@ -1582,6 +1600,49 @@ set_nb_pkt_per_burst(uint16_t nb) (unsigned int) nb_pkt_per_burst); } +static const char * +tx_split_get_name(enum tx_pkt_split split) +{ + uint32_t i; + + for (i = 0; i != RTE_DIM(tx_split_name); i++) { + if (tx_split_name[i].split == split) + return tx_split_name[i].name; + } + return NULL; +} + +void +set_tx_pkt_split(const char *name) +{ + uint32_t i; + + for (i = 0; i != RTE_DIM(tx_split_name); i++) { + if (strcmp(tx_split_name[i].name, name) == 0) { + tx_pkt_split = tx_split_name[i].split; + return; + } + } + printf("unknown value: \"%s\"\n", name); +} + +void +show_tx_pkt_segments(void) +{ + uint32_t i, n; + const char *split; + + n = tx_pkt_nb_segs; + split = tx_split_get_name(tx_pkt_split); + + printf("Number of segments: %u\n", n); + printf("Segment sizes: "); + for (i = 0; i != n - 1; i++) + printf("%hu,", tx_pkt_seg_lengths[i]); + printf("%hu\n", tx_pkt_seg_lengths[i]); + printf("Split packet: %s\n", split); +} + void set_tx_pkt_segments(unsigned *seg_lengths, unsigned nb_segs) { diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c index c9c095d..7e4f662 100644 --- a/app/test-pmd/csumonly.c +++ b/app/test-pmd/csumonly.c @@ -457,6 +457,155 @@ process_outer_cksums(void *outer_l3_hdr, struct testpmd_offload_info *info, } /* + * Helper function. + * Performs actual copying. + * Returns number of segments in the destination mbuf on success, + * or negative error code on failure. + */ +static int +mbuf_copy_split(const struct rte_mbuf *ms, struct rte_mbuf *md[], + uint16_t seglen[], uint8_t nb_seg) +{ + uint32_t dlen, slen, tlen; + uint32_t i, len; + const struct rte_mbuf *m; + const uint8_t *src; + uint8_t *dst; + + dlen = 0; + slen = 0; + tlen = 0; + + dst = NULL; + src = NULL; + + m = ms; + i = 0; + while (ms != NULL && i != nb_seg) { + + if (slen == 0) { + slen = rte_pktmbuf_data_len(ms); + src = rte_pktmbuf_mtod(ms, const uint8_t *); + } + + if (dlen == 0) { + dlen = RTE_MIN(seglen[i], slen); + md[i]->data_len = dlen; + md[i]->next = (i + 1 == nb_seg) ? NULL : md[i + 1]; + dst = rte_pktmbuf_mtod(md[i], uint8_t *); + } + + len = RTE_MIN(slen, dlen); + memcpy(dst, src, len); + tlen += len; + slen -= len; + dlen -= len; + src += len; + dst += len; + + if (slen == 0) + ms = ms->next; + if (dlen == 0) + i++; + } + + if (ms != NULL) + return -ENOBUFS; + else if (tlen != m->pkt_len) + return -EINVAL; + + md[0]->nb_segs = nb_seg; + md[0]->pkt_len = tlen; + md[0]->vlan_tci = m->vlan_tci; + md[0]->vlan_tci_outer = m->vlan_tci_outer; + md[0]->ol_flags = m->ol_flags; + md[0]->tx_offload = m->tx_offload; + + return nb_seg; +} + +/* + * Allocate a new mbuf with up to tx_pkt_nb_segs segments. + * Copy packet contents and offload information into then new segmented mbuf. + */ +static struct rte_mbuf * +pkt_copy_split(const struct rte_mbuf *pkt) +{ + int32_t n, rc; + uint32_t i, len, nb_seg; + struct rte_mempool *mp; + uint16_t seglen[RTE_MAX_SEGS_PER_PKT]; + struct rte_mbuf *p, *md[RTE_MAX_SEGS_PER_PKT]; + + mp = current_fwd_lcore()->mbp; + + if (tx_pkt_split == TX_PKT_SPLIT_RND) + nb_seg = random() % tx_pkt_nb_segs + 1; + else + nb_seg = tx_pkt_nb_segs; + + memcpy(seglen, tx_pkt_seg_lengths, nb_seg * sizeof(seglen[0])); + + /* calculate number of segments to use and their length. */ + len = 0; + for (i = 0; i != nb_seg && len < pkt->pkt_len; i++) { + len += seglen[i]; + md[i] = NULL; + } + + n = pkt->pkt_len - len; + + /* update size of the last segment to fit rest of the packet */ + if (n >= 0) { + seglen[i - 1] += n; + len += n; + } + + nb_seg = i; + while (i != 0) { + p = rte_pktmbuf_alloc(mp); + if (p == NULL) { + RTE_LOG(ERR, USER1, + "failed to allocate %u-th of %u mbuf " + "from mempool: %s\n", + nb_seg - i, nb_seg, mp->name); + break; + } + + md[--i] = p; + if (rte_pktmbuf_tailroom(md[i]) < seglen[i]) { + RTE_LOG(ERR, USER1, "mempool %s, %u-th segment: " + "expected seglen: %u, " + "actual mbuf tailroom: %u\n", + mp->name, i, seglen[i], + rte_pktmbuf_tailroom(md[i])); + break; + } + } + + /* all mbufs successfully allocated, do copy */ + if (i == 0) { + rc = mbuf_copy_split(pkt, md, seglen, nb_seg); + if (rc < 0) + RTE_LOG(ERR, USER1, + "mbuf_copy_split for %p(len=%u, nb_seg=%hhu) " + "into %u segments failed with error code: %d\n", + pkt, pkt->pkt_len, pkt->nb_segs, nb_seg, rc); + + /* figure out how many mbufs to free. */ + i = RTE_MAX(rc, 0); + } + + /* free unused mbufs */ + for (; i != nb_seg; i++) { + rte_pktmbuf_free_seg(md[i]); + md[i] = NULL; + } + + return md[0]; +} + +/* * Receive a burst of packets, and for each packet: * - parse packet, and try to recognize a supported packet type (1) * - if it's not a supported packet type, don't touch the packet, else: @@ -486,7 +635,7 @@ pkt_burst_checksum_forward(struct fwd_stream *fs) { struct rte_mbuf *pkts_burst[MAX_PKT_BURST]; struct rte_port *txp; - struct rte_mbuf *m; + struct rte_mbuf *m, *p; struct ether_hdr *eth_hdr; void *l3_hdr = NULL, *outer_l3_hdr = NULL; /* can be IPv4 or IPv6 */ uint16_t nb_rx; @@ -627,6 +776,16 @@ pkt_burst_checksum_forward(struct fwd_stream *fs) m->tso_segsz = info.tso_segsz; m->ol_flags = ol_flags; + /* Do split & copy for the packet. */ + if (tx_pkt_split != TX_PKT_SPLIT_OFF) { + p = pkt_copy_split(m); + if (p != NULL) { + rte_pktmbuf_free(m); + m = p; + pkts_burst[i] = m; + } + } + /* if verbose mode is enabled, dump debug info */ if (verbose_level > 0) { struct { @@ -648,6 +807,8 @@ pkt_burst_checksum_forward(struct fwd_stream *fs) const char *name; printf("-----------------\n"); + printf("mbuf=%p, pkt_len=%u, nb_segs=%hhu:\n", + m, m->pkt_len, m->nb_segs); /* dump rx parsed packet info */ printf("rx: l2_len=%d ethertype=%x l3_len=%d " "l4_proto=%d l4_len=%d\n", diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index 2e302bb..1ee935b 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -173,6 +173,9 @@ uint16_t tx_pkt_seg_lengths[RTE_MAX_SEGS_PER_PKT] = { }; uint8_t tx_pkt_nb_segs = 1; /**< Number of segments in TXONLY packets */ +enum tx_pkt_split tx_pkt_split = TX_PKT_SPLIT_OFF; +/**< Split policy for packets to TX. */ + uint16_t nb_pkt_per_burst = DEF_PKT_BURST; /**< Number of packets per burst. */ uint16_t mb_mempool_cache = DEF_MBUF_CACHE; /**< Size of mbuf mempool cache. */ diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index d6742d6..ee7de98 100644 --- a/app/test-pmd/testpmd.h +++ b/app/test-pmd/testpmd.h @@ -361,6 +361,14 @@ extern uint16_t tx_pkt_length; /**< Length of TXONLY packet */ extern uint16_t tx_pkt_seg_lengths[RTE_MAX_SEGS_PER_PKT]; /**< Seg. lengths */ extern uint8_t tx_pkt_nb_segs; /**< Number of segments in TX packets */ +enum tx_pkt_split { + TX_PKT_SPLIT_OFF, + TX_PKT_SPLIT_ON, + TX_PKT_SPLIT_RND, +}; + +extern enum tx_pkt_split tx_pkt_split; + extern uint16_t nb_pkt_per_burst; extern uint16_t mb_mempool_cache; extern int8_t rx_pthresh; @@ -509,6 +517,8 @@ void set_qmap(portid_t port_id, uint8_t is_rx, uint16_t queue_id, uint8_t map_va void set_verbose_level(uint16_t vb_level); void set_tx_pkt_segments(unsigned *seg_lengths, unsigned nb_segs); +void show_tx_pkt_segments(void); +void set_tx_pkt_split(const char *name); void set_nb_pkt_per_burst(uint16_t pkt_burst); char *list_pkt_forwarding_modes(void); void set_pkt_forwarding_mode(const char *fwd_mode); diff --git a/app/test-pmd/txonly.c b/app/test-pmd/txonly.c index db8f37a..a903d4f 100644 --- a/app/test-pmd/txonly.c +++ b/app/test-pmd/txonly.c @@ -210,6 +210,7 @@ pkt_burst_transmit(struct fwd_stream *fs) uint64_t end_tsc; uint64_t core_cycles; #endif + uint32_t nb_segs, pkt_len; #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES start_tsc = rte_rdtsc(); @@ -233,7 +234,12 @@ pkt_burst_transmit(struct fwd_stream *fs) } pkt->data_len = tx_pkt_seg_lengths[0]; pkt_seg = pkt; - for (i = 1; i < tx_pkt_nb_segs; i++) { + if (tx_pkt_split == TX_PKT_SPLIT_RND) + nb_segs = random() % tx_pkt_nb_segs + 1; + else + nb_segs = tx_pkt_nb_segs; + pkt_len = pkt->data_len; + for (i = 1; i < nb_segs; i++) { pkt_seg->next = tx_mbuf_alloc(mbp); if (pkt_seg->next == NULL) { pkt->nb_segs = i; @@ -242,6 +248,7 @@ pkt_burst_transmit(struct fwd_stream *fs) } pkt_seg = pkt_seg->next; pkt_seg->data_len = tx_pkt_seg_lengths[i]; + pkt_len += pkt_seg->data_len; } pkt_seg->next = NULL; /* Last segment of packet. */ @@ -266,8 +273,8 @@ pkt_burst_transmit(struct fwd_stream *fs) * Complete first mbuf of packet and append it to the * burst of packets to be transmitted. */ - pkt->nb_segs = tx_pkt_nb_segs; - pkt->pkt_len = tx_pkt_length; + pkt->nb_segs = nb_segs; + pkt->pkt_len = pkt_len; pkt->ol_flags = ol_flags; pkt->vlan_tci = vlan_tci; pkt->vlan_tci_outer = vlan_tci_outer; diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst index 4fb1e0b..3a326f9 100644 --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst @@ -211,7 +211,7 @@ show config Displays the configuration of the application. The configuration comes from the command-line, the runtime or the application defaults:: - testpmd> show config (rxtx|cores|fwd) + testpmd> show config (rxtx|cores|fwd|txpkts) The available information categories are: @@ -221,6 +221,8 @@ The available information categories are: * ``fwd``: Packet forwarding configuration. +* ``txpkts``: Packets to TX configuration. + For example: .. code-block:: console @@ -396,6 +398,23 @@ Set the length of each segment of the TX-ONLY packets:: Where x[,y]* represents a CSV list of values, without white space. +set txsplit +~~~~~~~~~~~ + +Set the split policy for the TX packets, applicable for TX-ONLY and CSUM forwarding modes:: + + testpmd> set txsplit (off|on|rand) + +Where: + +* ``off`` disable packet copy & split for CSUM mode. + +* ``on`` split outgoing packet into multiple segments. Size of each segment + and number of segments per packet is determined by ``set txpkts`` command + (see above). + +* ``rand`` same as 'on', but number of segments per each packet is a random value between 1 and total number of segments. + set corelist ~~~~~~~~~~~~ -- 1.8.3.1