DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] doc: improve freebsd guide layout
@ 2015-12-15 11:53 John McNamara
  2015-12-15 12:45 ` Thomas Monjalon
  0 siblings, 1 reply; 2+ messages in thread
From: John McNamara @ 2015-12-15 11:53 UTC (permalink / raw)
  To: dev

Fixed FreeBSD Getting Started Guide rst layout to improve
rendering in PDF.

Signed-off-by: John McNamara <john.mcnamara@intel.com>
---
 doc/guides/freebsd_gsg/build_dpdk.rst         | 205 ++++++++++++--------------
 doc/guides/freebsd_gsg/build_sample_apps.rst  | 158 ++++++++++----------
 doc/guides/freebsd_gsg/install_from_ports.rst |  67 +++++----
 doc/guides/freebsd_gsg/intro.rst              |  22 +--
 4 files changed, 216 insertions(+), 236 deletions(-)

diff --git a/doc/guides/freebsd_gsg/build_dpdk.rst b/doc/guides/freebsd_gsg/build_dpdk.rst
index 8eff599..ceacf7f 100644
--- a/doc/guides/freebsd_gsg/build_dpdk.rst
+++ b/doc/guides/freebsd_gsg/build_dpdk.rst
@@ -33,76 +33,63 @@
 Compiling the DPDK Target from Source
 =====================================
 
-.. note::
-
-    Testing has been performed using FreeBSD* 10.0-RELEASE (x86_64) and requires the
-    installation of the kernel sources, which should be included during the
-    installation of FreeBSD*. The DPDK also requires the use of FreeBSD*
-    ports to compile and function.
-
 System Requirements
 -------------------
 
 The DPDK and its applications require the GNU make system (gmake)
-to build on FreeBSD*. Optionally, gcc may also be used in place of clang
+to build on FreeBSD. Optionally, gcc may also be used in place of clang
 to build the DPDK, in which case it too must be installed prior to
 compiling the DPDK. The installation of these tools is covered in this
 section.
 
 Compiling the DPDK requires the FreeBSD kernel sources, which should be
-included during the installation of FreeBSD* on the development platform.
-The DPDK also requires the use of FreeBSD* ports to compile and function.
+included during the installation of FreeBSD on the development platform.
+The DPDK also requires the use of FreeBSD ports to compile and function.
 
-To use the FreeBSD* ports system, it is required to update and extract the FreeBSD*
+To use the FreeBSD ports system, it is required to update and extract the FreeBSD
 ports tree by issuing the following commands:
 
 .. code-block:: console
 
-    root@host:~ # portsnap fetch
-    root@host:~ # portsnap extract
+    portsnap fetch
+    portsnap extract
 
 If the environment requires proxies for external communication, these can be set
 using:
 
 .. code-block:: console
 
-    root@host:~ # setenv http_proxy <my_proxy_host>:<port>
-    root@host:~ # setenv ftp_proxy <my_proxy_host>:<port>
-
-The FreeBSD* ports below need to be installed prior to building the DPDK.
-In general these can be installed using the following set of commands:
+    setenv http_proxy <my_proxy_host>:<port>
+    setenv ftp_proxy <my_proxy_host>:<port>
 
-#.  cd /usr/ports/<port_location>
+The FreeBSD ports below need to be installed prior to building the DPDK.
+In general these can be installed using the following set of commands::
 
-#.  make config-recursive
+   cd /usr/ports/<port_location>
 
-#.  make install
+   make config-recursive
 
-#.  make clean
+   make install
 
-Each port location can be found using:
+   make clean
 
-.. code-block:: console
+Each port location can be found using::
 
-    user@host:~ # whereis <port_name>
+   whereis <port_name>
 
 The ports required and their locations are as follows:
 
-dialog4ports
-   /usr/ports/ports-mgmt/dialog4ports
+* dialog4ports: ``/usr/ports/ports-mgmt/dialog4ports``
 
-GNU make(gmake)
-   /usr/ports/devel/gmake
+* GNU make(gmake): ``/usr/ports/devel/gmake``
 
-coreutils
-   /usr/ports/sysutils/coreutils
+* coreutils: ``/usr/ports/sysutils/coreutils``
 
-For compiling and using the DPDK with gcc, it too must be installed
+For compiling and using the DPDK with gcc, the compiler must be installed
 from the ports collection:
 
-gcc: version 4.8 is recommended
-   /usr/ports/lang/gcc48
-   (Ensure that CPU_OPTS is selected (default is OFF))
+* gcc: version 4.8 is recommended ``/usr/ports/lang/gcc48``.
+  Ensure that ``CPU_OPTS`` is selected (default is OFF).
 
 When running the make config-recursive command, a dialog may be presented to the
 user. For the installation of the DPDK, the default options were used.
@@ -111,7 +98,7 @@ user. For the installation of the DPDK, the default options were used.
 
     To avoid multiple dialogs being presented to the user during make install,
     it is advisable before running the make install command to re-run the
-    make config -recursive command until no more dialogs are seen.
+    make config-recursive command until no more dialogs are seen.
 
 
 Install the DPDK and Browse Sources
@@ -121,10 +108,12 @@ First, uncompress the archive and move to the DPDK source directory:
 
 .. code-block:: console
 
-    user@host:~ # unzip DPDK-<version>zip
-    user@host:~ # cd DPDK-<version>
-    user@host:~/DPDK # ls
-    app/ config/ examples/ lib/ LICENSE.GPL LICENSE.LGPL Makefile mk/ scripts/ tools/
+    unzip DPDK-<version>.zip
+    cd DPDK-<version>
+
+    ls
+    app/ config/ examples/ lib/ LICENSE.GPL LICENSE.LGPL Makefile
+    mk/ scripts/ tools/
 
 The DPDK is composed of several directories:
 
@@ -139,38 +128,36 @@ The DPDK is composed of several directories:
 Installation of the DPDK Target Environments
 --------------------------------------------
 
-The format of a DPDK target is:
+The format of a DPDK target is::
 
-ARCH-MACHINE-EXECENV-TOOLCHAIN
+   ARCH-MACHINE-EXECENV-TOOLCHAIN
 
 Where:
 
-*   ARCH is:   x86_64
+* ``ARCH`` is: ``x86_64``
 
-*   MACHINE is: native
+* ``MACHINE`` is: ``native``
 
-*   EXECENV is: bsdapp
+* ``EXECENV`` is: ``bsdapp``
 
-*   TOOLCHAIN is: gcc | clang
+* ``TOOLCHAIN`` is: ``gcc`` | ``clang``
 
 The configuration files for the DPDK targets can be found in the DPDK/config
-directory in the form of:
-
-::
+directory in the form of::
 
     defconfig_ARCH-MACHINE-EXECENV-TOOLCHAIN
 
 .. note::
 
-    Configuration files are provided with the RTE_MACHINE optimization level set.
-    Within the configuration files, the RTE_MACHINE configuration value is set
-    to native, which means that the compiled software is tuned for the platform
-    on which it is built.  For more information on this setting, and its
-    possible values, see the *DPDK Programmers Guide*.
+   Configuration files are provided with the ``RTE_MACHINE`` optimization level set.
+   Within the configuration files, the ``RTE_MACHINE`` configuration value is set
+   to native, which means that the compiled software is tuned for the platform
+   on which it is built.  For more information on this setting, and its
+   possible values, see the *DPDK Programmers Guide*.
 
-To install and make the target, use "gmake install T=<target>".
+To make the target, use ``gmake install T=<target>``.
 
-For example to compile for FreeBSD* use:
+For example to compile for FreeBSD use:
 
 .. code-block:: console
 
@@ -178,10 +165,10 @@ For example to compile for FreeBSD* use:
 
 .. note::
 
-	If the compiler binary to be used does not correspond to that given in the
-	TOOLCHAIN part of the target, the compiler command may need to be explicitly
-	specified. For example, if compiling for gcc, where the gcc binary is called
-	gcc4.8, the command would need to be "gmake install T=<target> CC=gcc4.8".
+   If the compiler binary to be used does not correspond to that given in the
+   TOOLCHAIN part of the target, the compiler command may need to be explicitly
+   specified. For example, if compiling for gcc, where the gcc binary is called
+   gcc4.8, the command would need to be ``gmake install T=<target> CC=gcc4.8``.
 
 Browsing the Installed DPDK Environment Target
 ----------------------------------------------
@@ -194,8 +181,9 @@ contains the kernel modules to install:
 
 .. code-block:: console
 
-    user@host:~/DPDK # ls x86_64-native-bsdapp-gcc
-    app   build    hostapp    include    kmod    lib    Makefile
+    ls x86_64-native-bsdapp-gcc
+
+    app build hostapp include kmod lib Makefile
 
 
 .. _loading_contigmem:
@@ -216,13 +204,11 @@ module loading using:
 
 .. code-block:: console
 
-    root@host:~ # kenv hw.contigmem.num_buffers=n
-    root@host:~ # kenv hw.contigmem.buffer_size=m
+    kenv hw.contigmem.num_buffers=n
+    kenv hw.contigmem.buffer_size=m
 
 The kernel environment variables can also be specified during boot by placing the
-following in /boot/loader.conf:
-
-::
+following in ``/boot/loader.conf``::
 
     hw.contigmem.num_buffers=n hw.contigmem.buffer_size=m
 
@@ -230,7 +216,7 @@ The variables can be inspected using the following command:
 
 .. code-block:: console
 
-    root@host:~ # sysctl -a hw.contigmem
+    sysctl -a hw.contigmem
 
 Where n is the number of blocks and m is the size in bytes of each area of
 contiguous memory.  A default of two buffers of size 1073741824 bytes (1 Gigabyte)
@@ -245,27 +231,26 @@ is the DPDK target directory):
 
 It is advisable to include the loading of the contigmem module during the boot
 process to avoid issues with potential memory fragmentation during later system
-up time.  This can be achieved by copying the module to the /boot/kernel/
-directory and placing the following into /boot/loader.conf:
-
-::
+up time.  This can be achieved by copying the module to the ``/boot/kernel/``
+directory and placing the following into ``/boot/loader.conf``::
 
     contigmem_load="YES"
 
 .. note::
 
     The contigmem_load directive should be placed after any definitions of
-    hw.contigmem.num_buffers and hw.contigmem.buffer_size if the default values
+    ``hw.contigmem.num_buffers`` and ``hw.contigmem.buffer_size`` if the default values
     are not to be used.
 
 An error such as:
 
 .. code-block:: console
 
-    kldload: can't load ./x86_64-native-bsdapp-gcc/kmod/contigmem.ko: Exec format error
+    kldload: can't load ./x86_64-native-bsdapp-gcc/kmod/contigmem.ko:
+             Exec format error
 
 is generally attributed to not having enough contiguous memory
-available and can be verified via dmesg or /var/log/messages:
+available and can be verified via dmesg or ``/var/log/messages``:
 
 .. code-block:: console
 
@@ -278,7 +263,7 @@ To avoid this error, reduce the number of buffers or the buffer size.
 Loading the DPDK nic_uio Module
 -------------------------------
 
-After loading the contigmem module, the nic_uio must also be loaded into the
+After loading the contigmem module, the ``nic_uio must`` also be loaded into the
 running kernel prior to running any DPDK application.  This module must
 be loaded using the kldload command as shown below (assuming that the current
 directory is the DPDK target directory).
@@ -290,28 +275,26 @@ directory is the DPDK target directory).
 .. note::
 
     If the ports to be used are currently bound to a existing kernel driver
-    then the hw.nic_uio.bdfs sysctl value will need to be set before loading the
+    then the ``hw.nic_uio.bdfs sysctl`` value will need to be set before loading the
     module. Setting this value is described in the next section below.
 
-Currently loaded modules can be seen by using the "kldstat" command and a module
-can be removed from the running kernel by using "kldunload <module_name>".
+Currently loaded modules can be seen by using the ``kldstat`` command and a module
+can be removed from the running kernel by using ``kldunload <module_name>``.
 
-To load the module during boot, copy the nic_uio module to /boot/kernel
-and place the following into /boot/loader.conf:
-
-::
+To load the module during boot, copy the ``nic_uio`` module to ``/boot/kernel``
+and place the following into ``/boot/loader.conf``::
 
     nic_uio_load="YES"
 
 .. note::
 
-    nic_uio_load="YES" must appear after the contigmem_load directive, if it exists.
+    ``nic_uio_load="YES"`` must appear after the contigmem_load directive, if it exists.
 
-By default, the nic_uio module will take ownership of network ports if they are
+By default, the ``nic_uio`` module will take ownership of network ports if they are
 recognized DPDK devices and are not owned by another module. However, since
 the FreeBSD kernel includes support, either built-in, or via a separate driver
 module, for most network card devices, it is likely that the ports to be used are
-already bound to a driver other than nic_uio. The following sub-section describe
+already bound to a driver other than ``nic_uio``. The following sub-section describe
 how to query and modify the device ownership of the ports to be used by
 DPDK applications.
 
@@ -321,11 +304,11 @@ Binding Network Ports to the nic_uio Module
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Device ownership can be viewed using the pciconf -l command. The example below shows
-four Intel® 82599 network ports under "if_ixgbe" module ownership.
+four Intel® 82599 network ports under ``if_ixgbe`` module ownership.
 
 .. code-block:: console
 
-    user@host:~ # pciconf -l
+    pciconf -l
     ix0@pci0:1:0:0: class=0x020000 card=0x00038086 chip=0x10fb8086 rev=0x01 hdr=0x00
     ix1@pci0:1:0:1: class=0x020000 card=0x00038086 chip=0x10fb8086 rev=0x01 hdr=0x00
     ix2@pci0:2:0:0: class=0x020000 card=0x00038086 chip=0x10fb8086 rev=0x01 hdr=0x00
@@ -333,41 +316,35 @@ four Intel® 82599 network ports under "if_ixgbe" module ownership.
 
 The first column constitutes three components:
 
-#.  Device name: ixN
+#. Device name: ``ixN``
 
-#.  Unit name:  pci0
+#. Unit name: ``pci0``
 
-#.  Selector (Bus:Device:Function):   1:0:0
+#. Selector (Bus:Device:Function): ``1:0:0``
 
-Where no driver is associated with a device, the device name will be none.
+Where no driver is associated with a device, the device name will be ``none``.
 
-By default, the FreeBSD* kernel will include built-in drivers for the most common
+By default, the FreeBSD kernel will include built-in drivers for the most common
 devices; a kernel rebuild would normally be required to either remove the drivers
 or configure them as loadable modules.
 
-To avoid building a custom kernel, the nic_uio module can detach a network port
-from its current device driver.  This is achieved by setting the hw.nic_uio.bdfs
-kernel environment variable prior to loading nic_uio, as follows:
-
-::
+To avoid building a custom kernel, the ``nic_uio`` module can detach a network port
+from its current device driver. This is achieved by setting the ``hw.nic_uio.bdfs``
+kernel environment variable prior to loading ``nic_uio``, as follows::
 
     hw.nic_uio.bdfs="b:d:f,b:d:f,..."
 
 Where a comma separated list of selectors is set, the list must not contain any
 whitespace.
 
-For example to re-bind "ix2\@pci0:2:0:0" and "ix3\@pci0:2:0:1" to the nic_uio module
-upon loading, use the following command:
-
-.. code-block:: console
+For example to re-bind ``ix2@pci0:2:0:0`` and ``ix3@pci0:2:0:1`` to the ``nic_uio`` module
+upon loading, use the following command::
 
     kenv hw.nic_uio.bdfs="2:0:0,2:0:1"
 
 The variable can also be specified during boot by placing the following into
-"/boot/loader.conf", before the previously-described "nic_uio_load" line - as
-shown.
-
-::
+``/boot/loader.conf``, before the previously-described ``nic_uio_load`` line - as
+shown::
 
     hw.nic_uio.bdfs="2:0:0,2:0:1"
     nic_uio_load="YES"
@@ -376,15 +353,15 @@ Binding Network Ports Back to their Original Kernel Driver
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 If the original driver for a network port has been compiled into the kernel,
-it is necessary to reboot FreeBSD* to restore the original device binding. Before
-doing so, update or remove the "hw.nic_uio.bdfs" in "/boot/loader.conf".
+it is necessary to reboot FreeBSD to restore the original device binding. Before
+doing so, update or remove the ``hw.nic_uio.bdfs`` in ``/boot/loader.conf``.
 
 If rebinding to a driver that is a loadable module, the network port binding can
 be reset without rebooting. To do so, unload both the target kernel module and the
-nic_uio module, modify or clear the "hw.nic_uio.bdfs" kernel environment (kenv)
+``nic_uio`` module, modify or clear the ``hw.nic_uio.bdfs`` kernel environment (kenv)
 value, and reload the two drivers - first the original kernel driver, and then
-the nic_uio driver. [The latter does not need to be reloaded unless there are
-ports that are still to be bound to it].
+the ``nic_uio driver``. Note: the latter does not need to be reloaded unless there are
+ports that are still to be bound to it.
 
 Example commands to perform these steps are shown below:
 
@@ -393,9 +370,11 @@ Example commands to perform these steps are shown below:
     kldunload nic_uio
     kldunload <original_driver>
 
-    kenv -u hw.nic_uio.bdfs  # to clear the value completely
+    # To clear the value completely:
+    kenv -u hw.nic_uio.bdfs
 
-    kenv hw.nic_uio.bdfs="b:d:f,b:d:f,..." # to update the list of ports to bind
+    # To update the list of ports to bind:
+    kenv hw.nic_uio.bdfs="b:d:f,b:d:f,..."
 
     kldload <original_driver>
 
diff --git a/doc/guides/freebsd_gsg/build_sample_apps.rst b/doc/guides/freebsd_gsg/build_sample_apps.rst
index a89055f..823e1fb 100644
--- a/doc/guides/freebsd_gsg/build_sample_apps.rst
+++ b/doc/guides/freebsd_gsg/build_sample_apps.rst
@@ -40,71 +40,76 @@ Compiling a Sample Application
 ------------------------------
 
 Once a DPDK target environment directory has been created (such as
-x86_64-native-bsdapp-clang), it contains all libraries and header files required
+``x86_64-native-bsdapp-clang``), it contains all libraries and header files required
 to build an application.
 
-When compiling an application in the FreeBSD* environment on the DPDK,
+When compiling an application in the FreeBSD environment on the DPDK,
 the following variables must be exported:
 
-*   RTE_SDK - Points to the DPDK installation directory.
+*   ``RTE_SDK`` - Points to the DPDK installation directory.
 
-*   RTE_TARGET - Points to the DPDK target environment directory.
-    For FreeBSD*, this is the x86_64-native-bsdapp-clang or
-    x86_64-native-bsdapp-gcc directory.
+*   ``RTE_TARGET`` - Points to the DPDK target environment directory.
+    For FreeBSD, this is the ``x86_64-native-bsdapp-clang`` or
+    ``x86_64-native-bsdapp-gcc`` directory.
 
-The following is an example of creating the helloworld application, which runs
-in the DPDK FreeBSD* environment. While the example demonstrates compiling
-using gcc version 4.8, compiling with clang will be similar, except that the "CC="
-parameter can probably be omitted. The "helloworld" example may be found in the
-${RTE_SDK}/examples directory.
+The following is an example of creating the ``helloworld`` application, which runs
+in the DPDK FreeBSD environment. While the example demonstrates compiling
+using gcc version 4.8, compiling with clang will be similar, except that the ``CC=``
+parameter can probably be omitted. The ``helloworld`` example may be found in the
+``${RTE_SDK}/examples`` directory.
 
-The directory contains the main.c file.  This file, when combined with the
+The directory contains the ``main.c`` file. This file, when combined with the
 libraries in the DPDK target environment, calls the various functions to
 initialize the DPDK environment, then launches an entry point (dispatch
-application) for each core to be utilized.  By default, the binary is generated
+application) for each core to be utilized. By default, the binary is generated
 in the build directory.
 
 .. code-block:: console
 
-    user@host:~/DPDK$ cd examples/helloworld/
-    user@host:~/DPDK/examples/helloworld$ setenv RTE_SDK $HOME/DPDK
-    user@host:~/DPDK/examples/helloworld$ setenv RTE_TARGET x86_64-native-bsdapp-gcc
-    user@host:~/DPDK/examples/helloworld$ gmake CC=gcc48
-    CC main.o
-    LD helloworld
-    INSTALL-APP helloworld
-    INSTALL-MAP helloworld.map
-    user@host:~/DPDK/examples/helloworld$ ls build/app
-    helloworld helloworld.map
+    setenv RTE_SDK /home/user/DPDK
+    cd $(RTE_SDK)
+    cd examples/helloworld/
+    setenv RTE_SDK $HOME/DPDK
+    setenv RTE_TARGET x86_64-native-bsdapp-gcc
+
+    gmake CC=gcc48
+      CC main.o
+      LD helloworld
+      INSTALL-APP helloworld
+      INSTALL-MAP helloworld.map
+
+    ls build/app
+      helloworld helloworld.map
 
 .. note::
 
-    In the above example, helloworld was in the directory structure of the
-    DPDK.  However, it could have been located outside the directory
+    In the above example, ``helloworld`` was in the directory structure of the
+    DPDK. However, it could have been located outside the directory
     structure to keep the DPDK structure intact.  In the following case,
-    the helloworld application is copied to a new directory as a new starting
+    the ``helloworld`` application is copied to a new directory as a new starting
     point.
 
 .. code-block:: console
 
-    user@host:~$ setenv RTE_SDK /home/user/DPDK
-    user@host:~$ cp -r $(RTE_SDK)/examples/helloworld my_rte_app
-    user@host:~$ cd my_rte_app/
-    user@host:~$ setenv RTE_TARGET x86_64-native-bsdapp-gcc
-    user@host:~/my_rte_app$ gmake CC=gcc48
-    CC main.o
-    LD helloworld
-    INSTALL-APP helloworld
-    INSTALL-MAP helloworld.map
+    setenv RTE_SDK /home/user/DPDK
+    cp -r $(RTE_SDK)/examples/helloworld my_rte_app
+    cd my_rte_app/
+    setenv RTE_TARGET x86_64-native-bsdapp-gcc
+
+    gmake CC=gcc48
+      CC main.o
+      LD helloworld
+      INSTALL-APP helloworld
+      INSTALL-MAP helloworld.map
 
 .. _running_sample_app:
 
 Running a Sample Application
 ----------------------------
 
-#.  The contigmem and nic_uio modules must be set up prior to running an application.
+#.  The ``contigmem`` and ``nic_uio`` modules must be set up prior to running an application.
 
-#.  Any ports to be used by the application must be already bound to the nic_uio module,
+#.  Any ports to be used by the application must be already bound to the ``nic_uio`` module,
     as described in section :ref:`binding_network_ports`, prior to running the application.
     The application is linked with the DPDK target environment's Environment
     Abstraction Layer (EAL) library, which provides some options that are generic
@@ -114,69 +119,68 @@ The following is the list of options that can be given to the EAL:
 
 .. code-block:: console
 
-    ./rte-app -n NUM [-c COREMASK] [-b <domain:bus:devid.func>] [-r NUM] [-v] [--proc-type <primary|secondary|auto>]
+    ./rte-app -n NUM [-c COREMASK] [-b <domain:bus:devid.func>] \
+              [-r NUM] [-v] [--proc-type <primary|secondary|auto>]
 
 .. note::
 
     EAL has a common interface between all operating systems and is based on the
-    Linux* notation for PCI devices. For example, a FreeBSD* device selector of
-    pci0:2:0:1 is referred to as 02:00.1 in EAL.
+    Linux notation for PCI devices. For example, a FreeBSD device selector of
+    ``pci0:2:0:1`` is referred to as ``02:00.1`` in EAL.
 
-The EAL options for FreeBSD* are as follows:
+The EAL options for FreeBSD are as follows:
 
-*   -c COREMASK
-    : A hexadecimal bit mask of the cores to run on.  Note that core numbering
+*   ``-c COREMASK``:
+    A hexadecimal bit mask of the cores to run on.  Note that core numbering
     can change between platforms and should be determined beforehand.
 
-*   -n NUM
-    : Number of memory channels per processor socket.
+*   ``-n NUM``:
+    Number of memory channels per processor socket.
 
-*   -b <domain:bus:devid.func>
-    : blacklisting of ports; prevent EAL from using specified PCI device
-    (multiple -b options are allowed).
+*   ``-b <domain:bus:devid.func>``:
+    Blacklisting of ports; prevent EAL from using specified PCI device
+    (multiple ``-b`` options are allowed).
 
-*   --use-device
-    : use the specified Ethernet device(s) only.  Use comma-separate
-    <[domain:]bus:devid.func> values. Cannot be used with -b option.
+*   ``--use-device``:
+    Use the specified Ethernet device(s) only.  Use comma-separate
+    ``[domain:]bus:devid.func`` values. Cannot be used with ``-b`` option.
 
-*   -r NUM
-    : Number of memory ranks.
+*   ``-r NUM``:
+    Number of memory ranks.
 
-*   -v
-    : Display version information on startup.
+*   ``-v``:
+    Display version information on startup.
 
-*   --proc-type
-    : The type of process instance.
+*   ``--proc-type``:
+    The type of process instance.
 
-Other options, specific to Linux* and are not supported under FreeBSD* are as follows:
+Other options, specific to Linux and are not supported under FreeBSD are as follows:
 
-*   socket-mem
-    : Memory to allocate from hugepages on specific sockets.
+*   ``socket-mem``:
+    Memory to allocate from hugepages on specific sockets.
 
-*   --huge-dir
-    : The directory where hugetlbfs is mounted.
+*   ``--huge-dir``:
+    The directory where hugetlbfs is mounted.
 
-*   --file-prefix
-    : The prefix text used for hugepage filenames.
+*   ``--file-prefix``:
+    The prefix text used for hugepage filenames.
 
-*   -m MB
-    : Memory to allocate from hugepages, regardless of processor socket.
-    It is recommended that --socket-mem be used instead of this option.
+*   ``-m MB``:
+    Memory to allocate from hugepages, regardless of processor socket.
+    It is recommended that ``--socket-mem`` be used instead of this option.
 
-The -c and the -n options are mandatory; the others are optional.
+The ``-c`` option is mandatory; the others are optional.
 
 Copy the DPDK application binary to your target, then run the application
 as follows (assuming the platform has four memory channels, and that cores 0-3
-are present and are to be used for running the application):
-
-.. code-block:: console
+are present and are to be used for running the application)::
 
-    root@target:~$ ./helloworld -c f -n 4
+    ./helloworld -c f -n 4
 
 .. note::
 
-    The --proc-type and --file-prefix EAL options are used for running multiple
-    DPDK processes.  See the “Multi-process Sample Application” chapter
+    The ``--proc-type`` and ``--file-prefix`` EAL options are used for running multiple
+    DPDK processes.  See the "Multi-process Sample Application" chapter
     in the *DPDK Sample Applications User Guide and the DPDK
     Programmers Guide* for more details.
 
@@ -187,14 +191,14 @@ Running DPDK Applications Without Root Privileges
 
 Although applications using the DPDK use network ports and other hardware
 resources directly, with a number of small permission adjustments, it is possible
-to run these applications as a user other than “root”.  To do so, the ownership,
+to run these applications as a user other than "root".  To do so, the ownership,
 or permissions, on the following file system objects should be adjusted to ensure
 that the user account being used to run the DPDK application has access
 to them:
 
-*   The userspace-io device files in /dev, for example, /dev/uio0, /dev/uio1, and so on
+*   The userspace-io device files in ``/dev``, for example, ``/dev/uio0``, ``/dev/uio1``, and so on
 
-*   The userspace contiguous memory device:  /dev/contigmem
+*   The userspace contiguous memory device: ``/dev/contigmem``
 
 .. note::
 
diff --git a/doc/guides/freebsd_gsg/install_from_ports.rst b/doc/guides/freebsd_gsg/install_from_ports.rst
index 47e49b4..8177029 100644
--- a/doc/guides/freebsd_gsg/install_from_ports.rst
+++ b/doc/guides/freebsd_gsg/install_from_ports.rst
@@ -35,41 +35,41 @@ Installing DPDK from the Ports Collection
 
 The easiest way to get up and running with the DPDK on FreeBSD is to
 install it from the ports collection. Details of getting and using the ports
-collection are documented in the FreeBSD Handbook at:
-
-	https://www.freebsd.org/doc/handbook/ports-using.html
+collection are documented in the
+`FreeBSD Handbook <http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html>`_.
 
 .. note::
 
-    Testing has been performed using FreeBSD* 10.0-RELEASE (x86_64) and requires the
+    Testing has been performed using FreeBSD 10.0-RELEASE (x86_64) and requires the
     installation of the kernel sources, which should be included during the
-    installation of FreeBSD*.
+    installation of FreeBSD.
 
 Installing the DPDK FreeBSD Port
 --------------------------------
 
-On a system with the ports collection installed in /usr/ports, the DPDK
+On a system with the ports collection installed in ``/usr/ports``, the DPDK
 can be installed using the commands:
 
 .. code-block:: console
 
-    root@host:~ # cd /usr/ports/net/dpdk
+    cd /usr/ports/net/dpdk
 
-    root@host:~ # make install
+    make install
 
 After the installation of the DPDK port, instructions will be printed on
 how to install the kernel modules required to use the DPDK. A more
 complete version of these instructions can be found in the sections
 :ref:`loading_contigmem` and :ref:`loading_nic_uio`. Normally, lines like
-those below would be added to the file "/boot/loader.conf".
+those below would be added to the file ``/boot/loader.conf``.
 
 .. code-block:: console
 
-    # reserve 2 x 1G blocks of contiguous memory using contigmem driver
+    # Reserve 2 x 1G blocks of contiguous memory using contigmem driver:
     hw.contigmem.num_buffers=2
     hw.contigmem.buffer_size=1073741824
     contigmem_load="YES"
-    # identify NIC devices for DPDK apps to use and load nic_uio driver
+
+    # Identify NIC devices for DPDK apps to use and load nic_uio driver:
     hw.nic_uio.bdfs="2:0:0,2:0:1"
     nic_uio_load="YES"
 
@@ -77,41 +77,42 @@ Compiling and Running the Example Applications
 ----------------------------------------------
 
 When the DPDK has been installed from the ports collection it installs
-its example applications in "/usr/local/share/dpdk/examples" - also accessible via
-symlink as "/usr/local/share/examples/dpdk". These examples can be compiled and
+its example applications in ``/usr/local/share/dpdk/examples`` - also accessible via
+symlink as ``/usr/local/share/examples/dpdk``. These examples can be compiled and
 run as described in :ref:`compiling_sample_apps`. In this case, the required
 environmental variables should be set as below:
 
-* RTE_SDK=/usr/local/share/dpdk
+* ``RTE_SDK=/usr/local/share/dpdk``
 
-* RTE_TARGET=x86_64-native-bsdapp-clang
+* ``RTE_TARGET=x86_64-native-bsdapp-clang``
 
 .. note::
 
-	To install a copy of the DPDK compiled using gcc, please download the
-	official DPDK package from http://dpdk.org/ and install manually using
-	the instructions given in the next chapter, :ref:`building_from_source`
+   To install a copy of the DPDK compiled using gcc, please download the
+   official DPDK package from http://dpdk.org/ and install manually using
+   the instructions given in the next chapter, :ref:`building_from_source`
 
 An example application can therefore be copied to a user's home directory and
 compiled and run as below:
 
 .. code-block:: console
 
-    user@host:~$ export RTE_SDK=/usr/local/share/dpdk
+    export RTE_SDK=/usr/local/share/dpdk
 
-    user@host:~$ export RTE_TARGET=x86_64-native-bsdapp-clang
+    export RTE_TARGET=x86_64-native-bsdapp-clang
 
-    user@host:~$ cp -r /usr/local/share/dpdk/examples/helloworld .
+    cp -r /usr/local/share/dpdk/examples/helloworld .
 
-    user@host:~$ cd helloworld/
+    cd helloworld/
 
-    user@host:~/helloworld$ gmake
+    gmake
       CC main.o
       LD helloworld
       INSTALL-APP helloworld
       INSTALL-MAP helloworld.map
 
-    user@host:~/helloworld$ sudo ./build/helloworld -c F -n 2
+    sudo ./build/helloworld -c F -n 2
+
     EAL: Contigmem driver has 2 buffers, each of size 1GB
     EAL: Sysctl reports 8 cpus
     EAL: Detected lcore 0
@@ -121,9 +122,10 @@ compiled and run as below:
     EAL: Support maximum 64 logical core(s) by configuration.
     EAL: Detected 4 lcore(s)
     EAL: Setting up physically contiguous memory...
-    EAL: Mapped memory segment 1 @ 0x802400000: physaddr:0x40000000, len 1073741824
-    EAL: Mapped memory segment 2 @ 0x842400000: physaddr:0x100000000, len 1073741824
-    EAL: WARNING: clock_gettime cannot use CLOCK_MONOTONIC_RAW and HPET is not available - clock timings may be less accurate.
+    EAL: Mapped memory segment 1 @ 0x802400000: len 1073741824
+    EAL: Mapped memory segment 2 @ 0x842400000: len 1073741824
+    EAL: WARNING: clock_gettime cannot use CLOCK_MONOTONIC_RAW and HPET
+         is not available - clock timings may be less accurate.
     EAL: TSC frequency is ~3569023 KHz
     EAL: PCI scan found 24 devices
     EAL: Master core 0 is ready (tid=0x802006400)
@@ -153,10 +155,11 @@ compiled and run as below:
 
 .. note::
 
-	To run a DPDK process as a non-root user, adjust the permissions on
-	the /dev/contigmem and /dev/uio device nodes as described in section
-	:ref:`running_non_root`
+   To run a DPDK process as a non-root user, adjust the permissions on
+   the ``/dev/contigmem`` and ``/dev/uio device`` nodes as described in section
+   :ref:`running_non_root`
 
 .. note::
-	For an explanation of the command-line parameters that can be passed to an
-	DPDK application, see section :ref:`running_sample_app`.
+
+   For an explanation of the command-line parameters that can be passed to an
+   DPDK application, see section :ref:`running_sample_app`.
diff --git a/doc/guides/freebsd_gsg/intro.rst b/doc/guides/freebsd_gsg/intro.rst
index 176358a..6fb1a74 100644
--- a/doc/guides/freebsd_gsg/intro.rst
+++ b/doc/guides/freebsd_gsg/intro.rst
@@ -34,20 +34,19 @@ Introduction
 This document contains instructions for installing and configuring the
 Data Plane Development Kit (DPDK) software. It is designed to get customers
 up and running quickly and describes how to compile and run a
-DPDK application in a FreeBSD* application (bsdapp) environment, without going
+DPDK application in a FreeBSD application (bsdapp) environment, without going
 deeply into detail.
 
-For a comprehensive guide to installing and using FreeBSD*, the following
-handbook is available from the FreeBSD* Documentation Project:
-
-`http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html <http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html>`_
+For a comprehensive guide to installing and using FreeBSD, the following
+handbook is available from the FreeBSD Documentation Project:
+`FreeBSD Handbook <http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html>`_.
 
 .. note::
 
-	The DPDK is now available as part of the FreeBSD ports collection.
-	Installing via the ports collection infrastructure is now the recommended
-	way to install the DPDK on FreeBSD, and is documented in the
-	next chapter, :ref:`install_from_ports`.
+   The DPDK is now available as part of the FreeBSD ports collection.
+   Installing via the ports collection infrastructure is now the recommended
+   way to install the DPDK on FreeBSD, and is documented in the
+   next chapter, :ref:`install_from_ports`.
 
 Documentation Roadmap
 ---------------------
@@ -82,8 +81,3 @@ The following is a list of DPDK documents in the suggested reading order:
 *   **Sample Applications User Guide**: Describes a set of sample applications.
     Each chapter describes a sample application that showcases specific functionality
     and provides instructions on how to compile, run and use the sample application.
-
-.. note::
-
-    These documents are available for download as a separate documentation
-    package at the same location as the DPDK code package.
-- 
2.5.0

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [dpdk-dev] [PATCH] doc: improve freebsd guide layout
  2015-12-15 11:53 [dpdk-dev] [PATCH] doc: improve freebsd guide layout John McNamara
@ 2015-12-15 12:45 ` Thomas Monjalon
  0 siblings, 0 replies; 2+ messages in thread
From: Thomas Monjalon @ 2015-12-15 12:45 UTC (permalink / raw)
  To: John McNamara; +Cc: dev

2015-12-15 11:53, John McNamara:
> Fixed FreeBSD Getting Started Guide rst layout to improve
> rendering in PDF.
> 
> Signed-off-by: John McNamara <john.mcnamara@intel.com>

Applied, thanks

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2015-12-15 12:46 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-12-15 11:53 [dpdk-dev] [PATCH] doc: improve freebsd guide layout John McNamara
2015-12-15 12:45 ` Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).