* [dpdk-dev] [PATCH] igb: handle VF LPE mailbox message
@ 2015-03-18 12:01 Sergio Gonzalez Monroy
2015-03-18 12:04 ` Gonzalez Monroy, Sergio
2015-03-18 16:01 ` Ananyev, Konstantin
0 siblings, 2 replies; 4+ messages in thread
From: Sergio Gonzalez Monroy @ 2015-03-18 12:01 UTC (permalink / raw)
To: dev
This patch adds the handle function for the LPE mailbox message (VF to
PF) to set maximum packet size, which can be used to enable jumbo
frame support.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
---
lib/librte_pmd_e1000/igb_pf.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/lib/librte_pmd_e1000/igb_pf.c b/lib/librte_pmd_e1000/igb_pf.c
index bc3816a..2d49379 100644
--- a/lib/librte_pmd_e1000/igb_pf.c
+++ b/lib/librte_pmd_e1000/igb_pf.c
@@ -395,6 +395,31 @@ igb_vf_set_vlan(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
}
static int
+igb_vf_set_rlpml(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
+{
+ struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint16_t rlpml = msgbuf[1] & E1000_VMOLR_RLPML_MASK;
+ uint32_t max_frame = rlpml + ETHER_HDR_LEN + ETHER_CRC_LEN;
+ uint32_t vmolr;
+
+ if ((max_frame < ETHER_MIN_LEN) || (max_frame > ETHER_MAX_JUMBO_FRAME_LEN))
+ return -1;
+
+ vmolr = E1000_READ_REG(hw, E1000_VMOLR(vf));
+
+ vmolr &= ~E1000_VMOLR_RLPML_MASK;
+ vmolr |= rlpml;
+
+ /* Enable Long Packet support */
+ vmolr |= E1000_VMOLR_LPE;
+
+ E1000_WRITE_REG(hw, E1000_VMOLR(vf), vmolr);
+ E1000_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+static int
igb_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
{
uint16_t mbx_size = E1000_VFMAILBOX_SIZE;
@@ -428,6 +453,9 @@ igb_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
case E1000_VF_SET_MULTICAST:
retval = igb_vf_set_multicast(dev, vf, msgbuf);
break;
+ case E1000_VF_SET_LPE:
+ retval = igb_vf_set_rlpml(dev, vf, msgbuf);
+ break;
case E1000_VF_SET_VLAN:
retval = igb_vf_set_vlan(dev, vf, msgbuf);
break;
--
1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [dpdk-dev] [PATCH] igb: handle VF LPE mailbox message
2015-03-18 12:01 [dpdk-dev] [PATCH] igb: handle VF LPE mailbox message Sergio Gonzalez Monroy
@ 2015-03-18 12:04 ` Gonzalez Monroy, Sergio
2015-03-18 16:01 ` Ananyev, Konstantin
1 sibling, 0 replies; 4+ messages in thread
From: Gonzalez Monroy, Sergio @ 2015-03-18 12:04 UTC (permalink / raw)
To: dev
On 18/03/2015 12:01, Sergio Gonzalez Monroy wrote:
> This patch adds the handle function for the LPE mailbox message (VF to
> PF) to set maximum packet size, which can be used to enable jumbo
> frame support.
>
> Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
> ---
> lib/librte_pmd_e1000/igb_pf.c | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/lib/librte_pmd_e1000/igb_pf.c b/lib/librte_pmd_e1000/igb_pf.c
> index bc3816a..2d49379 100644
> --- a/lib/librte_pmd_e1000/igb_pf.c
> +++ b/lib/librte_pmd_e1000/igb_pf.c
> @@ -395,6 +395,31 @@ igb_vf_set_vlan(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
> }
>
> static int
> +igb_vf_set_rlpml(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
> +{
> + struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> + uint16_t rlpml = msgbuf[1] & E1000_VMOLR_RLPML_MASK;
> + uint32_t max_frame = rlpml + ETHER_HDR_LEN + ETHER_CRC_LEN;
> + uint32_t vmolr;
> +
> + if ((max_frame < ETHER_MIN_LEN) || (max_frame > ETHER_MAX_JUMBO_FRAME_LEN))
> + return -1;
> +
> + vmolr = E1000_READ_REG(hw, E1000_VMOLR(vf));
> +
> + vmolr &= ~E1000_VMOLR_RLPML_MASK;
> + vmolr |= rlpml;
> +
> + /* Enable Long Packet support */
> + vmolr |= E1000_VMOLR_LPE;
> +
> + E1000_WRITE_REG(hw, E1000_VMOLR(vf), vmolr);
> + E1000_WRITE_FLUSH(hw);
> +
> + return 0;
> +}
> +
> +static int
> igb_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
> {
> uint16_t mbx_size = E1000_VFMAILBOX_SIZE;
> @@ -428,6 +453,9 @@ igb_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
> case E1000_VF_SET_MULTICAST:
> retval = igb_vf_set_multicast(dev, vf, msgbuf);
> break;
> + case E1000_VF_SET_LPE:
> + retval = igb_vf_set_rlpml(dev, vf, msgbuf);
> + break;
> case E1000_VF_SET_VLAN:
> retval = igb_vf_set_vlan(dev, vf, msgbuf);
> break;
This patch is targeting 2.1 release.
Sergio
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [dpdk-dev] [PATCH] igb: handle VF LPE mailbox message
2015-03-18 12:01 [dpdk-dev] [PATCH] igb: handle VF LPE mailbox message Sergio Gonzalez Monroy
2015-03-18 12:04 ` Gonzalez Monroy, Sergio
@ 2015-03-18 16:01 ` Ananyev, Konstantin
2015-04-28 16:19 ` Thomas Monjalon
1 sibling, 1 reply; 4+ messages in thread
From: Ananyev, Konstantin @ 2015-03-18 16:01 UTC (permalink / raw)
To: Gonzalez Monroy, Sergio, dev
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Sergio Gonzalez Monroy
> Sent: Wednesday, March 18, 2015 12:02 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH] igb: handle VF LPE mailbox message
>
> This patch adds the handle function for the LPE mailbox message (VF to
> PF) to set maximum packet size, which can be used to enable jumbo
> frame support.
>
> Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> ---
> lib/librte_pmd_e1000/igb_pf.c | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/lib/librte_pmd_e1000/igb_pf.c b/lib/librte_pmd_e1000/igb_pf.c
> index bc3816a..2d49379 100644
> --- a/lib/librte_pmd_e1000/igb_pf.c
> +++ b/lib/librte_pmd_e1000/igb_pf.c
> @@ -395,6 +395,31 @@ igb_vf_set_vlan(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
> }
>
> static int
> +igb_vf_set_rlpml(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
> +{
> + struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> + uint16_t rlpml = msgbuf[1] & E1000_VMOLR_RLPML_MASK;
> + uint32_t max_frame = rlpml + ETHER_HDR_LEN + ETHER_CRC_LEN;
> + uint32_t vmolr;
> +
> + if ((max_frame < ETHER_MIN_LEN) || (max_frame > ETHER_MAX_JUMBO_FRAME_LEN))
> + return -1;
> +
> + vmolr = E1000_READ_REG(hw, E1000_VMOLR(vf));
> +
> + vmolr &= ~E1000_VMOLR_RLPML_MASK;
> + vmolr |= rlpml;
> +
> + /* Enable Long Packet support */
> + vmolr |= E1000_VMOLR_LPE;
> +
> + E1000_WRITE_REG(hw, E1000_VMOLR(vf), vmolr);
> + E1000_WRITE_FLUSH(hw);
> +
> + return 0;
> +}
> +
> +static int
> igb_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
> {
> uint16_t mbx_size = E1000_VFMAILBOX_SIZE;
> @@ -428,6 +453,9 @@ igb_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
> case E1000_VF_SET_MULTICAST:
> retval = igb_vf_set_multicast(dev, vf, msgbuf);
> break;
> + case E1000_VF_SET_LPE:
> + retval = igb_vf_set_rlpml(dev, vf, msgbuf);
> + break;
> case E1000_VF_SET_VLAN:
> retval = igb_vf_set_vlan(dev, vf, msgbuf);
> break;
> --
> 1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [dpdk-dev] [PATCH] igb: handle VF LPE mailbox message
2015-03-18 16:01 ` Ananyev, Konstantin
@ 2015-04-28 16:19 ` Thomas Monjalon
0 siblings, 0 replies; 4+ messages in thread
From: Thomas Monjalon @ 2015-04-28 16:19 UTC (permalink / raw)
To: Gonzalez Monroy, Sergio; +Cc: dev
> > This patch adds the handle function for the LPE mailbox message (VF to
> > PF) to set maximum packet size, which can be used to enable jumbo
> > frame support.
> >
> > Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
>
> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Applied, thanks
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-04-28 16:19 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-18 12:01 [dpdk-dev] [PATCH] igb: handle VF LPE mailbox message Sergio Gonzalez Monroy
2015-03-18 12:04 ` Gonzalez Monroy, Sergio
2015-03-18 16:01 ` Ananyev, Konstantin
2015-04-28 16:19 ` Thomas Monjalon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).