From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga04.intel.com (mga04.intel.com [192.55.52.120]) by dpdk.org (Postfix) with ESMTP id 79C0B7F70 for ; Tue, 14 Jun 2016 09:01:20 +0200 (CEST) Received: from fmsmga004.fm.intel.com ([10.253.24.48]) by fmsmga104.fm.intel.com with ESMTP; 14 Jun 2016 00:01:06 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.26,470,1459839600"; d="scan'208";a="121451603" Received: from shvmail01.sh.intel.com ([10.239.29.42]) by fmsmga004.fm.intel.com with ESMTP; 14 Jun 2016 00:01:06 -0700 Received: from shecgisg004.sh.intel.com (shecgisg004.sh.intel.com [10.239.29.89]) by shvmail01.sh.intel.com with ESMTP id u5E712aq005935; Tue, 14 Jun 2016 15:01:02 +0800 Received: from shecgisg004.sh.intel.com (localhost [127.0.0.1]) by shecgisg004.sh.intel.com (8.13.6/8.13.6/SuSE Linux 0.8) with ESMTP id u5E70xtQ010617; Tue, 14 Jun 2016 15:01:01 +0800 Received: (from beileixi@localhost) by shecgisg004.sh.intel.com (8.13.6/8.13.6/Submit) id u5E70xQG010613; Tue, 14 Jun 2016 15:00:59 +0800 From: Beilei Xing To: wenzhuo.lu@intel.com Cc: dev@dpdk.org, Beilei Xing Date: Tue, 14 Jun 2016 14:59:54 +0800 Message-Id: <1465887596-10346-29-git-send-email-beilei.xing@intel.com> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1465887596-10346-1-git-send-email-beilei.xing@intel.com> References: <1462514861-29419-1-git-send-email-beilei.xing@intel.com> <1465887596-10346-1-git-send-email-beilei.xing@intel.com> Subject: [dpdk-dev] [PATCH v2 28/30] ixgbe/base: add flow control autoneg for x550a X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: patches and discussions about DPDK List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 14 Jun 2016 07:01:21 -0000 This patch adds x550a flow control auto negotiation support. ixgbe_setup_fc_x550a and ixgbe_fc_autoneg_X550a functions where added to setup and enable flow control. MAC ops function pointer fc_autoneg was added so that hardware specific fc autoneg functions can be called from ixgbe_fc_enable_generic. Signed-off-by: Beilei Xing --- drivers/net/ixgbe/base/ixgbe_api.h | 2 + drivers/net/ixgbe/base/ixgbe_common.c | 5 +- drivers/net/ixgbe/base/ixgbe_type.h | 6 ++ drivers/net/ixgbe/base/ixgbe_x550.c | 181 ++++++++++++++++++++++++++++++++++ drivers/net/ixgbe/base/ixgbe_x550.h | 2 + 5 files changed, 194 insertions(+), 2 deletions(-) diff --git a/drivers/net/ixgbe/base/ixgbe_api.h b/drivers/net/ixgbe/base/ixgbe_api.h index c126982..3aad1da 100644 --- a/drivers/net/ixgbe/base/ixgbe_api.h +++ b/drivers/net/ixgbe/base/ixgbe_api.h @@ -217,5 +217,7 @@ s32 ixgbe_handle_lasi(struct ixgbe_hw *hw); void ixgbe_set_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed); void ixgbe_disable_rx(struct ixgbe_hw *hw); void ixgbe_enable_rx(struct ixgbe_hw *hw); +s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, + u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm); #endif /* _IXGBE_API_H_ */ diff --git a/drivers/net/ixgbe/base/ixgbe_common.c b/drivers/net/ixgbe/base/ixgbe_common.c index e1d09e2..811875a 100644 --- a/drivers/net/ixgbe/base/ixgbe_common.c +++ b/drivers/net/ixgbe/base/ixgbe_common.c @@ -135,6 +135,7 @@ s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw) /* Flow Control */ mac->ops.fc_enable = ixgbe_fc_enable_generic; mac->ops.setup_fc = ixgbe_setup_fc_generic; + mac->ops.fc_autoneg = ixgbe_fc_autoneg; /* Link */ mac->ops.get_link_capabilities = NULL; @@ -2739,7 +2740,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) } /* Negotiate the fc mode to use */ - ixgbe_fc_autoneg(hw); + hw->mac.ops.fc_autoneg(hw); /* Disable any previous flow control settings */ mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN); @@ -2849,7 +2850,7 @@ out: * Find the intersection between advertised settings and link partner's * advertised settings **/ -STATIC s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, +s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm) { if ((!(adv_reg)) || (!(lp_reg))) { diff --git a/drivers/net/ixgbe/base/ixgbe_type.h b/drivers/net/ixgbe/base/ixgbe_type.h index 5d76c72..be51bee 100644 --- a/drivers/net/ixgbe/base/ixgbe_type.h +++ b/drivers/net/ixgbe/base/ixgbe_type.h @@ -3886,6 +3886,7 @@ struct ixgbe_mac_operations { /* Flow Control */ s32 (*fc_enable)(struct ixgbe_hw *); s32 (*setup_fc)(struct ixgbe_hw *); + void (*fc_autoneg)(struct ixgbe_hw *); /* Manageability interface */ s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8); @@ -4131,10 +4132,12 @@ struct ixgbe_hw { #define IXGBE_FUSES0_REV_MASK (3 << 6) #define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P) ? 0x8010 : 0x4010) +#define IXGBE_KRM_LINK_S1(P) ((P) ? 0x8200 : 0x4200) #define IXGBE_KRM_LINK_CTRL_1(P) ((P) ? 0x820C : 0x420C) #define IXGBE_KRM_AN_CNTL_1(P) ((P) ? 0x822C : 0x422C) #define IXGBE_KRM_AN_CNTL_8(P) ((P) ? 0x8248 : 0x4248) #define IXGBE_KRM_SGMII_CTRL(P) ((P) ? 0x82A0 : 0x42A0) +#define IXGBE_KRM_LP_BASE_PAGE_HIGH(P) ((P) ? 0x836C : 0x436C) #define IXGBE_KRM_DSP_TXFFE_STATE_4(P) ((P) ? 0x8634 : 0x4634) #define IXGBE_KRM_DSP_TXFFE_STATE_5(P) ((P) ? 0x8638 : 0x4638) #define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P) ((P) ? 0x8B00 : 0x4B00) @@ -4156,6 +4159,7 @@ struct ixgbe_hw { #define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR (1 << 18) #define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX (1 << 24) #define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR (1 << 26) +#define IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE (1 << 28) #define IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE (1 << 29) #define IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART (1 << 31) @@ -4164,6 +4168,8 @@ struct ixgbe_hw { #define IXGBE_KRM_AN_CNTL_8_LINEAR (1 << 0) #define IXGBE_KRM_AN_CNTL_8_LIMITING (1 << 1) +#define IXGBE_KRM_LP_BASE_PAGE_HIGH_SYM_PAUSE (1 << 10) +#define IXGBE_KRM_LP_BASE_PAGE_HIGH_ASM_PAUSE (1 << 11) #define IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D (1 << 12) #define IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D (1 << 19) diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c index 99023e9..ae6b79f 100644 --- a/drivers/net/ixgbe/base/ixgbe_x550.c +++ b/drivers/net/ixgbe/base/ixgbe_x550.c @@ -666,6 +666,10 @@ s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw) if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) mac->ops.setup_fc = ixgbe_setup_fc_generic; + else if (hw->mac.type == ixgbe_mac_X550EM_a) { + mac->ops.setup_fc = ixgbe_setup_fc_x550a; + mac->ops.fc_autoneg = ixgbe_fc_autoneg_x550a; + } else mac->ops.setup_fc = ixgbe_setup_fc_X550em; @@ -3759,6 +3763,183 @@ out: } /** + * ixgbe_fc_autoneg_x550a - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure + * + * Enable flow control according to IEEE clause 37. + **/ +void ixgbe_fc_autoneg_x550a(struct ixgbe_hw *hw) +{ + u32 link_s1, lp_an_page_low, an_cntl_1; + s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED; + ixgbe_link_speed speed; + bool link_up; + + /* AN should have completed when the cable was plugged in. + * Look for reasons to bail out. Bail out if: + * - FC autoneg is disabled, or if + * - link is not up. + */ + if (hw->fc.disable_fc_autoneg) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "Flow control autoneg is disabled"); + goto out; + } + + hw->mac.ops.check_link(hw, &speed, &link_up, false); + if (!link_up) { + ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down"); + goto out; + } + + /* Check at auto-negotiation has completed */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_S1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &link_s1); + + if (status != IXGBE_SUCCESS || + (link_s1 & IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE) == 0) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + goto out; + } + + /* Read the 10g AN autoc and LP ability registers and resolve + * local flow control settings accordingly + */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl_1); + + if (status != IXGBE_SUCCESS) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + goto out; + } + + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LP_BASE_PAGE_HIGH(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &lp_an_page_low); + + if (status != IXGBE_SUCCESS) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + goto out; + } + + status = ixgbe_negotiate_fc(hw, an_cntl_1, lp_an_page_low, + IXGBE_KRM_AN_CNTL_1_SYM_PAUSE, + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE, + IXGBE_KRM_LP_BASE_PAGE_HIGH_SYM_PAUSE, + IXGBE_KRM_LP_BASE_PAGE_HIGH_ASM_PAUSE); + +out: + if (status == IXGBE_SUCCESS) { + hw->fc.fc_was_autonegged = true; + } else { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + } +} + +/** + * ixgbe_setup_fc_x550em - Set up flow control + * @hw: pointer to hardware structure + * + * Called at init time to set up flow control. + **/ +s32 ixgbe_setup_fc_x550a(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_SUCCESS; + u32 an_cntl, link_ctrl = 0; + + DEBUGFUNC("ixgbe_setup_fc_x550em"); + + /* Validate the requested mode */ + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } + + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; + + /* Set up the 1G and 10G flow control advertisement registers so the + * HW will be able to do FC autoneg once the cable is plugged in. If + * we link at 10G, the 1G advertisement is harmless and vice versa. + */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl); + + if (status != IXGBE_SUCCESS) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + return status; + } + + /* The possible values of fc.requested_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: Invalid. + */ + switch (hw->fc.requested_mode) { + case ixgbe_fc_none: + /* Flow control completely disabled by software override. */ + an_cntl &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE); + break; + case ixgbe_fc_tx_pause: + /* Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + an_cntl |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; + an_cntl &= ~IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; + break; + case ixgbe_fc_rx_pause: + /* Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE, as such we fall + * through to the fc_full statement. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + an_cntl |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; + break; + default: + ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, + "Flow control param set incorrectly\n"); + return IXGBE_ERR_CONFIG; + } + + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, an_cntl); + + /* Restart auto-negotiation. */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &link_ctrl); + + if (status != IXGBE_SUCCESS) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + return status; + } + + link_ctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, link_ctrl); + + return status; +} + +/** * ixgbe_set_mux - Set mux for port 1 access with CS4227 * @hw: pointer to hardware structure * @state: set mux if 1, clear if 0 diff --git a/drivers/net/ixgbe/base/ixgbe_x550.h b/drivers/net/ixgbe/base/ixgbe_x550.h index b597b50..27d5d02 100644 --- a/drivers/net/ixgbe/base/ixgbe_x550.h +++ b/drivers/net/ixgbe/base/ixgbe_x550.h @@ -150,6 +150,8 @@ s32 ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data); s32 ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 phy_data); +s32 ixgbe_setup_fc_x550a(struct ixgbe_hw *hw); +void ixgbe_fc_autoneg_x550a(struct ixgbe_hw *hw); s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw); s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed speed, -- 2.5.0