[dpdk-dev] [PATCH v15 2/2] i40e: add device args to enable a floating VEB

[Zhe Tao <zhe.tao@intel.com>]

The standard Virtual Ethernet Bridge(VEB) definition in 1Qbg is a bridge
which has an uplink port to the outside world (maybe another bridge), but
a "floating" VEB is a special VEB without an uplink port to the outside.
Instead, traffic can be sent from one VF to another using the floating
VEB - even when the physical link on the NIC port is down.

This patch adds floating VEB options in the devargs for i40e driver.
Using these parameters, applications can decide whether to use legacy
VEB/VEPA or a floating VEB.
To enable this feature, the user should pass a devargs parameter to the
EAL, for example "-w 84:00.0,enable_floating_veb=1", to control whether
the PMD will to use the floating VEB feature or not.

Once the floating VEB feature is enabled, all the VFs created by
this PF device are connected to the floating VEB.

NOTE: The floating VEB functionality requires a NIC firmware version
of 5.0 or greater.

Signed-off-by: Zhe Tao <zhe.tao@intel.com>
---
 doc/guides/nics/i40e.rst               |  45 ++++++++++
 doc/guides/rel_notes/release_16_07.rst |   8 ++
 drivers/net/i40e/i40e_ethdev.c         | 160 +++++++++++++++++++++++++++++++++
 drivers/net/i40e/i40e_ethdev.h         |   5 ++
 4 files changed, 218 insertions(+)

diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst
index 934eb02..da695af 100644
--- a/doc/guides/nics/i40e.rst
+++ b/doc/guides/nics/i40e.rst
@@ -366,3 +366,48 @@ Delete all flow director rules on a port:
 
    testpmd> flush_flow_director 0
 
+Floating VEB
+~~~~~~~~~~~~~
+
+The Intel® Ethernet Controller X710 and XL710 Family support a feature called
+"Floating VEB".
+
+A Virtual Ethernet Bridge (VEB) is an IEEE Edge Virtual Bridging (EVB) term
+for functionality that allows local switching between virtual endpoints within
+a physical endpoint and also with an external bridge/network.
+
+A "Floating" VEB doesn't have an uplink connection to the outside world so all
+switching is done internally and remains within the host. As such, this
+feature provides security benefits.
+
+In addition, a Floating VEB overcomes a limitation of normal VEBs where they
+cannot forward packets when the physical link is down. Floating VEBs don't need
+to connect to the NIC port so they can still forward traffic from VF to VF
+even when the physical link is down.
+
+Therefore, with this feature enabled VFs can be limited to communicating with
+each other but not an outside network, and they can do so even when there is
+no physical uplink on the associated NIC port.
+
+To enable this feature, the user should pass a ``devargs`` parameter to the
+EAL, for example::
+
+    -w 84:00.0,enable_floating_veb=1
+
+In this configuration the PMD will use the floating VEB feature for all the
+VFs created by this PF device.
+
+Alternatively, the user can specify which VFs need to connect to this floating
+VEB using the ``floating_veb_list`` argument::
+
+    -w 84:00.0,enable_floating_veb=1,floating_veb_list=1;3-4
+
+In this example ``VF1``, ``VF3`` and ``VF4`` connect to the floating VEB,
+while other VFs connect to the normal VEB.
+
+The current implementation only supports one floating VEB and one regular
+VEB. VFs can connect to a floating VEB or a regular VEB according to the
+configuration passed on the EAL command line.
+
+The floating VEB functionality requires a NIC firmware version of 5.0
+or greater.
diff --git a/doc/guides/rel_notes/release_16_07.rst b/doc/guides/rel_notes/release_16_07.rst
index 54ebdc7..fc574af 100644
--- a/doc/guides/rel_notes/release_16_07.rst
+++ b/doc/guides/rel_notes/release_16_07.rst
@@ -132,6 +132,14 @@ New Features
   * A new library ``librte_pdump`` is added to provide packet capture API.
   * A new ``app/pdump`` tool is added to capture packets in DPDK.
 
+* **Added floating VEB support for i40e PF driver.**
+
+  A "floating VEB" is a special Virtual Ethernet Bridge (VEB) which does not
+  have an upload port, but instead is used for switching traffic between
+  virtual functions (VFs) on a port.
+
+  For information on this feature,  please see the "I40E Poll Mode Driver"
+  section of the "Network Interface Controller Drivers" document.
 
 Resolved Issues
 ---------------
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 5efcbc2..9ef0727 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -63,6 +63,9 @@
 #include "i40e_pf.h"
 #include "i40e_regs.h"
 
+#define ETH_I40E_FLOATING_VEB_ARG	"enable_floating_veb"
+#define ETH_I40E_FLOATING_VEB_LIST_ARG	"floating_veb_list"
+
 #define I40E_CLEAR_PXE_WAIT_MS     200
 
 /* Maximun number of capability elements */
@@ -755,6 +758,161 @@ i40e_add_tx_flow_control_drop_filter(struct i40e_pf *pf)
 }
 
 static int
+floating_veb_list_handler(__rte_unused const char *key,
+			  const char *floating_veb_value,
+			  void *opaque)
+{
+	int idx = 0;
+	unsigned int count = 0;
+	char *end = NULL;
+	int min, max;
+	bool *vf_floating_veb = opaque;
+
+	while (isblank(*floating_veb_value))
+		floating_veb_value++;
+
+	/* Reset floating VEB configuration for VFs */
+	for (idx = 0; idx < I40E_MAX_VF; idx++)
+		vf_floating_veb[idx] = false;
+
+	min = I40E_MAX_VF;
+	do {
+		while (isblank(*floating_veb_value))
+			floating_veb_value++;
+		if (*floating_veb_value == '\0')
+			return -1;
+		errno = 0;
+		idx = strtoul(floating_veb_value, &end, 10);
+		if (errno || end == NULL)
+			return -1;
+		while (isblank(*end))
+			end++;
+		if (*end == '-') {
+			min = idx;
+		} else if ((*end == ';') || (*end == '\0')) {
+			max = idx;
+			if (min == I40E_MAX_VF)
+				min = idx;
+			if (max >= I40E_MAX_VF)
+				max = I40E_MAX_VF - 1;
+			for (idx = min; idx <= max; idx++) {
+				vf_floating_veb[idx] = true;
+				count++;
+			}
+			min = I40E_MAX_VF;
+		} else {
+			return -1;
+		}
+		floating_veb_value = end + 1;
+	} while (*end != '\0');
+
+	if (count == 0)
+		return -1;
+
+	return 0;
+}
+
+static void
+config_vf_floating_veb(struct rte_devargs *devargs,
+		       uint16_t floating_veb,
+		       bool *vf_floating_veb)
+{
+	struct rte_kvargs *kvlist;
+	int i;
+	const char *floating_veb_list = ETH_I40E_FLOATING_VEB_LIST_ARG;
+
+	if (!floating_veb)
+		return;
+	/* All the VFs attach to the floating VEB by default
+	 * when the floating VEB is enabled.
+	 */
+	for (i = 0; i < I40E_MAX_VF; i++)
+		vf_floating_veb[i] = true;
+
+	if (devargs == NULL)
+		return;
+
+	kvlist = rte_kvargs_parse(devargs->args, NULL);
+	if (kvlist == NULL)
+		return;
+
+	if (!rte_kvargs_count(kvlist, floating_veb_list)) {
+		rte_kvargs_free(kvlist);
+		return;
+	}
+	/* When the floating_veb_list parameter exists, all the VFs
+	 * will attach to the legacy VEB firstly, then configure VFs
+	 * to the floating VEB according to the floating_veb_list.
+	 */
+	if (rte_kvargs_process(kvlist, floating_veb_list,
+			       floating_veb_list_handler,
+			       vf_floating_veb) < 0) {
+		rte_kvargs_free(kvlist);
+		return;
+	}
+	rte_kvargs_free(kvlist);
+}
+
+static int
+i40e_check_floating_handler(__rte_unused const char *key,
+			    const char *value,
+			    __rte_unused void *opaque)
+{
+	if (strcmp(value, "1"))
+		return -1;
+
+	return 0;
+}
+
+static int
+is_floating_veb_supported(struct rte_devargs *devargs)
+{
+	struct rte_kvargs *kvlist;
+	const char *floating_veb_key = ETH_I40E_FLOATING_VEB_ARG;
+
+	if (devargs == NULL)
+		return 0;
+
+	kvlist = rte_kvargs_parse(devargs->args, NULL);
+	if (kvlist == NULL)
+		return 0;
+
+	if (!rte_kvargs_count(kvlist, floating_veb_key)) {
+		rte_kvargs_free(kvlist);
+		return 0;
+	}
+	/* Floating VEB is enabled when there's key-value:
+	 * enable_floating_veb=1
+	 */
+	if (rte_kvargs_process(kvlist, floating_veb_key,
+			       i40e_check_floating_handler, NULL) < 0) {
+		rte_kvargs_free(kvlist);
+		return 0;
+	}
+	rte_kvargs_free(kvlist);
+
+	return 1;
+}
+
+static void
+config_floating_veb(struct rte_eth_dev *dev)
+{
+	struct rte_pci_device *pci_dev = dev->pci_dev;
+	struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	memset(pf->floating_veb_list, 0, sizeof(pf->floating_veb_list));
+
+	if (hw->aq.fw_maj_ver >= FLOATING_VEB_SUPPORTED_FW_MAJ) {
+		pf->floating_veb = is_floating_veb_supported(pci_dev->devargs);
+		config_vf_floating_veb(pci_dev->devargs, pf->floating_veb,
+				       pf->floating_veb_list);
+	} else {
+		pf->floating_veb = false;
+	}
+}
+
+static int
 eth_i40e_dev_init(struct rte_eth_dev *dev)
 {
 	struct rte_pci_device *pci_dev;
@@ -847,6 +1005,8 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
 		     ((hw->nvm.version >> 4) & 0xff),
 		     (hw->nvm.version & 0xf), hw->nvm.eetrack);
 
+	/* Need the special FW version to support floating VEB */
+	config_floating_veb(dev);
 	/* Clear PXE mode */
 	i40e_clear_pxe_mode(hw);
 
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index 19c9dea..92c8fad 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -36,6 +36,7 @@
 
 #include <rte_eth_ctrl.h>
 #include <rte_time.h>
+#include <rte_kvargs.h>
 
 #define I40E_VLAN_TAG_SIZE        4
 
@@ -173,6 +174,10 @@ enum i40e_flxpld_layer_idx {
 #define I40E_QUEUE_ITR_INTERVAL_DEFAULT 32 /* 32 us */
 #define I40E_QUEUE_ITR_INTERVAL_MAX     8160 /* 8160 us */
 
+/* Special FW support this floating VEB feature */
+#define FLOATING_VEB_SUPPORTED_FW_MAJ 5
+#define FLOATING_VEB_SUPPORTED_FW_MIN 0
+
 struct i40e_adapter;
 
 /**
-- 
2.1.4