From: Kamil Rytarowski <krytarowski@caviumnetworks.com>
To: <dev@dpdk.org>
Cc: <maciej.czekaj@caviumnetworks.com>, <zyta.szpak@semihalf.com>,
<slawomir.rosek@semihalf.com>, <rad@semihalf.com>,
<jerin.jacob@caviumnetworks.com>, <ferruh.yigit@intel.com>,
<john.mcnamara@intel.com>,
Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Subject: [dpdk-dev] [PATCH v2 01/15] net/thunderx: cleanup the driver before adding new features
Date: Fri, 30 Sep 2016 14:05:40 +0200 [thread overview]
Message-ID: <1475237154-25388-2-git-send-email-krytarowski@caviumnetworks.com> (raw)
In-Reply-To: <1475237154-25388-1-git-send-email-krytarowski@caviumnetworks.com>
From: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Refactored features:
- enable nicvf_qset_rbdr_precharge to handle secondary queue sets
- rte_free already handles NULL pointer
- check mempool flags to predict being contiguous in memory
- prohibit to use mempool with multiple memory chunks
- simplify local construct of accessing nb_rx_queues
- enable NICVF_CAP_CQE_RX2 on CN88XX PASS2.0 hardware.
- remove redundant check for RSS size in nicvf_eth_dev_init
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
---
drivers/net/thunderx/base/nicvf_hw.c | 10 +++++-----
drivers/net/thunderx/base/nicvf_hw.h | 6 +++---
drivers/net/thunderx/nicvf_ethdev.c | 37 ++++++++++++++++++------------------
3 files changed, 26 insertions(+), 27 deletions(-)
diff --git a/drivers/net/thunderx/base/nicvf_hw.c b/drivers/net/thunderx/base/nicvf_hw.c
index 4bdd183..1f08ef2 100644
--- a/drivers/net/thunderx/base/nicvf_hw.c
+++ b/drivers/net/thunderx/base/nicvf_hw.c
@@ -141,7 +141,7 @@ nicvf_base_init(struct nicvf *nic)
return NICVF_ERR_BASE_INIT;
if (nicvf_hw_version(nic) == PCI_SUB_DEVICE_ID_CN88XX_PASS2_NICVF)
- nic->hwcap |= NICVF_CAP_TUNNEL_PARSING;
+ nic->hwcap |= NICVF_CAP_TUNNEL_PARSING | NICVF_CAP_CQE_RX2;
if (nicvf_hw_version(nic) == PCI_SUB_DEVICE_ID_CN81XX_NICVF)
nic->hwcap |= NICVF_CAP_TUNNEL_PARSING | NICVF_CAP_CQE_RX2;
@@ -497,9 +497,9 @@ nicvf_qsize_rbdr_roundup(uint32_t val)
}
int
-nicvf_qset_rbdr_precharge(struct nicvf *nic, uint16_t ridx,
- rbdr_pool_get_handler handler,
- void *opaque, uint32_t max_buffs)
+nicvf_qset_rbdr_precharge(void *dev, struct nicvf *nic,
+ uint16_t ridx, rbdr_pool_get_handler handler,
+ uint32_t max_buffs)
{
struct rbdr_entry_t *desc, *desc0;
struct nicvf_rbdr *rbdr = nic->rbdr;
@@ -514,7 +514,7 @@ nicvf_qset_rbdr_precharge(struct nicvf *nic, uint16_t ridx,
if (count >= max_buffs)
break;
desc0 = desc + count;
- phy = handler(opaque);
+ phy = handler(dev, nic);
if (phy) {
desc0->full_addr = phy;
count++;
diff --git a/drivers/net/thunderx/base/nicvf_hw.h b/drivers/net/thunderx/base/nicvf_hw.h
index a6cda82..2b8738b 100644
--- a/drivers/net/thunderx/base/nicvf_hw.h
+++ b/drivers/net/thunderx/base/nicvf_hw.h
@@ -85,7 +85,7 @@ enum nicvf_err_e {
NICVF_ERR_RSS_GET_SZ, /* -8171 */
};
-typedef nicvf_phys_addr_t (*rbdr_pool_get_handler)(void *opaque);
+typedef nicvf_phys_addr_t (*rbdr_pool_get_handler)(void *dev, void *opaque);
struct nicvf_hw_rx_qstats {
uint64_t q_rx_bytes;
@@ -194,8 +194,8 @@ int nicvf_qset_reclaim(struct nicvf *nic);
int nicvf_qset_rbdr_config(struct nicvf *nic, uint16_t qidx);
int nicvf_qset_rbdr_reclaim(struct nicvf *nic, uint16_t qidx);
-int nicvf_qset_rbdr_precharge(struct nicvf *nic, uint16_t ridx,
- rbdr_pool_get_handler handler, void *opaque,
+int nicvf_qset_rbdr_precharge(void *dev, struct nicvf *nic,
+ uint16_t ridx, rbdr_pool_get_handler handler,
uint32_t max_buffs);
int nicvf_qset_rbdr_active(struct nicvf *nic, uint16_t qidx);
diff --git a/drivers/net/thunderx/nicvf_ethdev.c b/drivers/net/thunderx/nicvf_ethdev.c
index 914035e..3cf32bf 100644
--- a/drivers/net/thunderx/nicvf_ethdev.c
+++ b/drivers/net/thunderx/nicvf_ethdev.c
@@ -691,7 +691,7 @@ nicvf_configure_cpi(struct rte_eth_dev *dev)
int ret;
/* Count started rx queues */
- for (qidx = qcnt = 0; qidx < nic->eth_dev->data->nb_rx_queues; qidx++)
+ for (qidx = qcnt = 0; qidx < dev->data->nb_rx_queues; qidx++)
if (dev->data->rx_queue_state[qidx] ==
RTE_ETH_QUEUE_STATE_STARTED)
qcnt++;
@@ -1023,12 +1023,9 @@ nicvf_stop_rx_queue(struct rte_eth_dev *dev, uint16_t qidx)
static void
nicvf_dev_rx_queue_release(void *rx_queue)
{
- struct nicvf_rxq *rxq = rx_queue;
-
PMD_INIT_FUNC_TRACE();
- if (rxq)
- rte_free(rxq);
+ rte_free(rx_queue);
}
static int
@@ -1070,6 +1067,7 @@ nicvf_dev_tx_queue_stop(struct rte_eth_dev *dev, uint16_t qidx)
return nicvf_stop_tx_queue(dev, qidx);
}
+
static int
nicvf_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
uint16_t nb_desc, unsigned int socket_id,
@@ -1087,9 +1085,15 @@ nicvf_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
PMD_DRV_LOG(WARNING, "socket_id expected %d, configured %d",
socket_id, nic->node);
- /* Mempool memory should be contiguous */
+ /* Mempool memory must be contiguous, so must be one memory segment*/
if (mp->nb_mem_chunks != 1) {
- PMD_INIT_LOG(ERR, "Non contiguous mempool, check huge page sz");
+ PMD_INIT_LOG(ERR, "Non-contiguous mempool, add more huge pages");
+ return -EINVAL;
+ }
+
+ /* Mempool memory must be physically contiguous */
+ if (mp->flags & MEMPOOL_F_NO_PHYS_CONTIG) {
+ PMD_INIT_LOG(ERR, "Mempool memory must be physically contiguous");
return -EINVAL;
}
@@ -1212,15 +1216,16 @@ nicvf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
}
static nicvf_phys_addr_t
-rbdr_rte_mempool_get(void *opaque)
+rbdr_rte_mempool_get(void *dev, void *opaque)
{
uint16_t qidx;
uintptr_t mbuf;
struct nicvf_rxq *rxq;
- struct nicvf *nic = nicvf_pmd_priv((struct rte_eth_dev *)opaque);
+ struct rte_eth_dev *eth_dev = (struct rte_eth_dev *)dev;
+ struct nicvf *nic __rte_unused = (struct nicvf *)opaque;
- for (qidx = 0; qidx < nic->eth_dev->data->nb_rx_queues; qidx++) {
- rxq = nic->eth_dev->data->rx_queues[qidx];
+ for (qidx = 0; qidx < eth_dev->data->nb_rx_queues; qidx++) {
+ rxq = eth_dev->data->rx_queues[qidx];
/* Maintain equal buffer count across all pools */
if (rxq->precharge_cnt >= rxq->qlen_mask)
continue;
@@ -1354,8 +1359,8 @@ nicvf_dev_start(struct rte_eth_dev *dev)
}
/* Fill rte_mempool buffers in RBDR pool and precharge it */
- ret = nicvf_qset_rbdr_precharge(nic, 0, rbdr_rte_mempool_get,
- dev, total_rxq_desc);
+ ret = nicvf_qset_rbdr_precharge(dev, nic, 0, rbdr_rte_mempool_get,
+ total_rxq_desc);
if (ret) {
PMD_INIT_LOG(ERR, "Failed to fill rbdr %d", ret);
goto qset_rbdr_reclaim;
@@ -1721,12 +1726,6 @@ nicvf_eth_dev_init(struct rte_eth_dev *eth_dev)
goto malloc_fail;
}
- ret = nicvf_mbox_get_rss_size(nic);
- if (ret) {
- PMD_INIT_LOG(ERR, "Failed to get rss table size");
- goto malloc_fail;
- }
-
PMD_INIT_LOG(INFO, "Port %d (%x:%x) mac=%02x:%02x:%02x:%02x:%02x:%02x",
eth_dev->data->port_id, nic->vendor_id, nic->device_id,
nic->mac_addr[0], nic->mac_addr[1], nic->mac_addr[2],
--
1.9.1
next prev parent reply other threads:[~2016-09-30 12:06 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-26 16:53 [dpdk-dev] [PATCH 00/13] Add support for secondary queue set in nicvf thunderx driver Kamil Rytarowski
2016-08-26 16:53 ` [dpdk-dev] [PATCH 01/13] net/thunderx: cleanup the driver before adding new features Kamil Rytarowski
2016-09-20 13:48 ` Ferruh Yigit
2016-09-29 14:21 ` Maciej Czekaj
2016-08-26 16:53 ` [dpdk-dev] [PATCH 02/13] net/thunderx: correct transmit checksum handling Kamil Rytarowski
2016-08-26 16:53 ` [dpdk-dev] [PATCH 03/13] net/thunderx/base: add family of functions to store qsets Kamil Rytarowski
2016-08-26 16:53 ` [dpdk-dev] [PATCH 04/13] net/thunderx/base: add secondary queue set support Kamil Rytarowski
2016-09-20 13:48 ` Ferruh Yigit
2016-09-29 14:22 ` Maciej Czekaj
2016-08-26 16:54 ` [dpdk-dev] [PATCH 05/13] net/thunderx: add family of functions to store DPDK qsets Kamil Rytarowski
2016-08-26 16:54 ` [dpdk-dev] [PATCH 06/13] net/thunderx: add secondary queue set in interrupt functions Kamil Rytarowski
2016-08-26 16:54 ` [dpdk-dev] [PATCH 07/13] net/thunderx: fix multiprocess support in stats Kamil Rytarowski
2016-09-20 13:48 ` Ferruh Yigit
2016-09-29 14:35 ` Maciej Czekaj
2016-08-26 16:54 ` [dpdk-dev] [PATCH 08/13] net/thunderx: add helper utils for secondary qset support Kamil Rytarowski
2016-08-26 16:54 ` [dpdk-dev] [PATCH 09/13] net/thunderx: add secondary qset support in dev stop/close Kamil Rytarowski
2016-08-26 16:54 ` [dpdk-dev] [PATCH 10/13] net/thunderx: add secondary qset support in device start Kamil Rytarowski
2016-08-26 16:54 ` [dpdk-dev] [PATCH 11/13] net/thunderx: add secondary qset support in device configure Kamil Rytarowski
2016-08-26 16:54 ` [dpdk-dev] [PATCH 12/13] net/thunderx: add final bits for secondary queue support Kamil Rytarowski
2016-09-20 13:49 ` Ferruh Yigit
2016-09-29 14:37 ` Maciej Czekaj
2016-08-26 16:54 ` [dpdk-dev] [PATCH 13/13] net/thunderx: document secondary queue set support Kamil Rytarowski
2016-09-26 20:17 ` Mcnamara, John
2016-09-29 14:38 ` Maciej Czekaj
2016-09-12 10:59 ` [dpdk-dev] [PATCH 00/13] Add support for secondary queue set in nicvf thunderx driver Kamil Rytarowski
2016-09-19 12:23 ` Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 00/15] " Kamil Rytarowski
2016-09-30 12:05 ` Kamil Rytarowski [this message]
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 02/15] net/thunderx: correct transmit checksum handling Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 03/15] net/thunderx/base: add family of functions to store qsets Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 04/15] net/thunderx/base: add secondary queue set support Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 05/15] net/thunderx: add family of functions to store DPDK qsets Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 06/15] net/thunderx: add secondary queue set in interrupt functions Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 07/15] net/thunderx: remove problematic private_data->eth_dev link Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 08/15] net/thunderx: add helper utils for secondary qset support Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 09/15] net/thunderx: add secondary qset support in dev stop/close Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 10/15] net/thunderx: add secondary qset support in device start Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 11/15] net/thunderx: add secondary qset support in device configure Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 12/15] net/thunderx: add final bits for secondary queue support Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 13/15] net/thunderx: document secondary queue set support Kamil Rytarowski
2016-09-30 15:12 ` Mcnamara, John
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 14/15] ethdev: Support VFs on the different PCI domains Kamil Rytarowski
2016-10-10 10:19 ` Ferruh Yigit
2016-10-10 13:01 ` Kamil Rytarowski
2016-10-10 13:27 ` Ferruh Yigit
2016-10-11 13:52 ` Kamil Rytarowski
2016-09-30 12:05 ` [dpdk-dev] [PATCH v2 15/15] net/thunderx: Bump driver version to 2.0 Kamil Rytarowski
2016-10-12 15:59 ` [dpdk-dev] [PATCH v2 00/15] Add support for secondary queue set in nicvf thunderx driver Bruce Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1475237154-25388-2-git-send-email-krytarowski@caviumnetworks.com \
--to=krytarowski@caviumnetworks.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=jerin.jacob@caviumnetworks.com \
--cc=john.mcnamara@intel.com \
--cc=kamil.rytarowski@caviumnetworks.com \
--cc=maciej.czekaj@caviumnetworks.com \
--cc=rad@semihalf.com \
--cc=slawomir.rosek@semihalf.com \
--cc=zyta.szpak@semihalf.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).