[dpdk-dev] [PATCH v3 01/10] net/bnx2x: set cache line based on build configuration

[dpdk-dev] [PATCH v3 01/10] net/bnx2x: set cache line based on build configuration

[Chas Williams]

Correctly hint the cache line size.  Remove unused macros associated
with the cache line size.

Fixes: 540a211084a7 ("bnx2x: driver core")

Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Harish Patil <harish.patil@qlogic.com>
---
 drivers/net/bnx2x/bnx2x.h | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 78757a8..ed7c55f 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -304,10 +304,7 @@ struct bnx2x_device_type {
 /* TCP with Timestamp Option (32) + IPv6 (40) */
 
 /* max supported alignment is 256 (8 shift) */
-#define BNX2X_RX_ALIGN_SHIFT 8
-/* FW uses 2 cache lines alignment for start packet and size  */
-#define BNX2X_FW_RX_ALIGN_START (1 << BNX2X_RX_ALIGN_SHIFT)
-#define BNX2X_FW_RX_ALIGN_END   (1 << BNX2X_RX_ALIGN_SHIFT)
+#define BNX2X_RX_ALIGN_SHIFT	RTE_MAX(6, min(8, RTE_CACHE_LINE_SIZE_LOG2))
 
 #define BNX2X_PXP_DRAM_ALIGN (BNX2X_RX_ALIGN_SHIFT - 5)
 
-- 
2.7.4

[dpdk-dev] [PATCH v3 02/10] net/bnx2x: remove unused preprocessor symbols and code

[Chas Williams]

ELINK_INCLUDE_EMUL and ELINK_INCLUDE_FPGA are never defined.  Remove them
along with enumeration constants dependent on their inclusion.

Fixes: 540a211084a7 ("bnx2x: driver core")

Signed-off-by: Chas Williams <3chas3@gmail.com>
---
 drivers/net/bnx2x/bnx2x.c |  28 ----
 drivers/net/bnx2x/elink.c | 392 ++++++++--------------------------------------
 drivers/net/bnx2x/elink.h |   4 -
 3 files changed, 64 insertions(+), 360 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x.c b/drivers/net/bnx2x/bnx2x.c
index a49a07f..bfcc087 100644
--- a/drivers/net/bnx2x/bnx2x.c
+++ b/drivers/net/bnx2x/bnx2x.c
@@ -7016,34 +7016,6 @@ static int bnx2x_initial_phy_init(struct bnx2x_softc *sc, int load_mode)
 
 	bnx2x_set_requested_fc(sc);
 
-	if (CHIP_REV_IS_SLOW(sc)) {
-		uint32_t bond = CHIP_BOND_ID(sc);
-		uint32_t feat = 0;
-
-		if (CHIP_IS_E2(sc) && CHIP_IS_MODE_4_PORT(sc)) {
-			feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC;
-		} else if (bond & 0x4) {
-			if (CHIP_IS_E3(sc)) {
-				feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC;
-			} else {
-				feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC;
-			}
-		} else if (bond & 0x8) {
-			if (CHIP_IS_E3(sc)) {
-				feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_UMAC;
-			} else {
-				feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC;
-			}
-		}
-
-/* disable EMAC for E3 and above */
-		if (bond & 0x2) {
-			feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC;
-		}
-
-		sc->link_params.feature_config_flags |= feat;
-	}
-
 	if (load_mode == LOAD_DIAG) {
 		lp->loopback_mode = ELINK_LOOPBACK_XGXS;
 /* Prefer doing PHY loopback at 10G speed, if possible */
diff --git a/drivers/net/bnx2x/elink.c b/drivers/net/bnx2x/elink.c
index 149cc97..f27c0a6 100644
--- a/drivers/net/bnx2x/elink.c
+++ b/drivers/net/bnx2x/elink.c
@@ -1586,26 +1586,6 @@ static elink_status_t elink_emac_enable(struct elink_params *params,
 	/* enable emac and not bmac */
 	REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + port * 4, 1);
 
-#ifdef ELINK_INCLUDE_EMUL
-	/* for paladium */
-	if (CHIP_REV_IS_EMUL(sc)) {
-		/* Use lane 1 (of lanes 0-3) */
-		REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, 1);
-		REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);
-	}
-	/* for fpga */
-	else
-#endif
-#ifdef ELINK_INCLUDE_FPGA
-	if (CHIP_REV_IS_FPGA(sc)) {
-		/* Use lane 1 (of lanes 0-3) */
-		PMD_DRV_LOG(DEBUG, "elink_emac_enable: Setting FPGA");
-
-		REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, 1);
-		REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 0);
-	} else
-#endif
-		/* ASIC */
 	if (vars->phy_flags & PHY_XGXS_FLAG) {
 		uint32_t ser_lane = ((params->lane_config &
 				      PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
@@ -1628,39 +1608,28 @@ static elink_status_t elink_emac_enable(struct elink_params *params,
 	elink_bits_en(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
 		      EMAC_TX_MODE_RESET);
 
-#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA)
-	if (CHIP_REV_IS_SLOW(sc)) {
-		/* config GMII mode */
-		val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE);
-		elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MODE,
-				   (val | EMAC_MODE_PORT_GMII));
-	} else {		/* ASIC */
-#endif
-		/* pause enable/disable */
-		elink_bits_dis(sc, emac_base + EMAC_REG_EMAC_RX_MODE,
-			       EMAC_RX_MODE_FLOW_EN);
+	/* pause enable/disable */
+	elink_bits_dis(sc, emac_base + EMAC_REG_EMAC_RX_MODE,
+		       EMAC_RX_MODE_FLOW_EN);
 
-		elink_bits_dis(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
-			       (EMAC_TX_MODE_EXT_PAUSE_EN |
-				EMAC_TX_MODE_FLOW_EN));
-		if (!(params->feature_config_flags &
-		      ELINK_FEATURE_CONFIG_PFC_ENABLED)) {
-			if (vars->flow_ctrl & ELINK_FLOW_CTRL_RX)
-				elink_bits_en(sc, emac_base +
-					      EMAC_REG_EMAC_RX_MODE,
-					      EMAC_RX_MODE_FLOW_EN);
-
-			if (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)
-				elink_bits_en(sc, emac_base +
-					      EMAC_REG_EMAC_TX_MODE,
-					      (EMAC_TX_MODE_EXT_PAUSE_EN |
-					       EMAC_TX_MODE_FLOW_EN));
-		} else
-			elink_bits_en(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
-				      EMAC_TX_MODE_FLOW_EN);
-#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA)
-	}
-#endif
+	elink_bits_dis(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
+		       (EMAC_TX_MODE_EXT_PAUSE_EN |
+			EMAC_TX_MODE_FLOW_EN));
+	if (!(params->feature_config_flags &
+	      ELINK_FEATURE_CONFIG_PFC_ENABLED)) {
+		if (vars->flow_ctrl & ELINK_FLOW_CTRL_RX)
+			elink_bits_en(sc, emac_base +
+				      EMAC_REG_EMAC_RX_MODE,
+				      EMAC_RX_MODE_FLOW_EN);
+
+		if (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)
+			elink_bits_en(sc, emac_base +
+				      EMAC_REG_EMAC_TX_MODE,
+				      (EMAC_TX_MODE_EXT_PAUSE_EN |
+				       EMAC_TX_MODE_FLOW_EN));
+	} else
+		elink_bits_en(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
+			      EMAC_TX_MODE_FLOW_EN);
 
 	/* KEEP_VLAN_TAG, promiscuous */
 	val = REG_RD(sc, emac_base + EMAC_REG_EMAC_RX_MODE);
@@ -1727,17 +1696,7 @@ static elink_status_t elink_emac_enable(struct elink_params *params,
 	REG_WR(sc, NIG_REG_EMAC0_PAUSE_OUT_EN + port * 4, val);
 	REG_WR(sc, NIG_REG_EGRESS_EMAC0_OUT_EN + port * 4, 0x1);
 
-#ifdef ELINK_INCLUDE_EMUL
-	if (CHIP_REV_IS_EMUL(sc)) {
-		/* Take the BigMac out of reset */
-		REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
-		       (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
-
-		/* Enable access for bmac registers */
-		REG_WR(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4, 0x1);
-	} else
-#endif
-		REG_WR(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4, 0x0);
+	REG_WR(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4, 0x0);
 
 	vars->mac_type = ELINK_MAC_TYPE_EMAC;
 	return ELINK_STATUS_OK;
@@ -2137,15 +2096,6 @@ static elink_status_t elink_bmac1_enable(struct elink_params *params,
 	wb_data[1] = 0;
 	REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
 		    wb_data, 2);
-#ifdef ELINK_INCLUDE_EMUL
-	/* Fix for emulation */
-	if (CHIP_REV_IS_EMUL(sc)) {
-		wb_data[0] = 0xf000;
-		wb_data[1] = 0;
-		REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD,
-			    wb_data, 2);
-	}
-#endif
 
 	return ELINK_STATUS_OK;
 }
@@ -5922,11 +5872,6 @@ elink_status_t elink_set_led(struct elink_params *params,
 							  params, mode);
 		}
 	}
-#ifdef ELINK_INCLUDE_EMUL
-	if (params->feature_config_flags &
-	    ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC)
-		return rc;
-#endif
 
 	switch (mode) {
 	case ELINK_LED_MODE_FRONT_PANEL_OFF:
@@ -11671,10 +11616,7 @@ elink_status_t elink_phy_probe(struct elink_params * params)
 	struct elink_phy *phy;
 	params->num_phys = 0;
 	PMD_DRV_LOG(DEBUG, "Begin phy probe");
-#ifdef ELINK_INCLUDE_EMUL
-	if (CHIP_REV_IS_EMUL(sc))
-		return ELINK_STATUS_OK;
-#endif
+
 	phy_config_swapped = params->multi_phy_config &
 	    PORT_HW_CFG_PHY_SWAPPED_ENABLED;
 
@@ -11739,182 +11681,6 @@ elink_status_t elink_phy_probe(struct elink_params * params)
 	return ELINK_STATUS_OK;
 }
 
-#ifdef ELINK_INCLUDE_EMUL
-static elink_status_t elink_init_e3_emul_mac(struct elink_params *params,
-					     struct elink_vars *vars)
-{
-	struct bnx2x_softc *sc = params->sc;
-	vars->line_speed = params->req_line_speed[0];
-	/* In case link speed is auto, set speed the highest as possible */
-	if (params->req_line_speed[0] == ELINK_SPEED_AUTO_NEG) {
-		if (params->feature_config_flags &
-		    ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC)
-			vars->line_speed = ELINK_SPEED_2500;
-		else if (elink_is_4_port_mode(sc))
-			vars->line_speed = ELINK_SPEED_10000;
-		else
-			vars->line_speed = ELINK_SPEED_20000;
-	}
-	if (vars->line_speed < ELINK_SPEED_10000) {
-		if ((params->feature_config_flags &
-		     ELINK_FEATURE_CONFIG_EMUL_DISABLE_UMAC)) {
-			PMD_DRV_LOG(DEBUG, "Invalid line speed %d while UMAC is"
-				    " disabled!", params->req_line_speed[0]);
-			return ELINK_STATUS_ERROR;
-		}
-		switch (vars->line_speed) {
-		case ELINK_SPEED_10:
-			vars->link_status = ELINK_LINK_10TFD;
-			break;
-		case ELINK_SPEED_100:
-			vars->link_status = ELINK_LINK_100TXFD;
-			break;
-		case ELINK_SPEED_1000:
-			vars->link_status = ELINK_LINK_1000TFD;
-			break;
-		case ELINK_SPEED_2500:
-			vars->link_status = ELINK_LINK_2500TFD;
-			break;
-		default:
-			PMD_DRV_LOG(DEBUG, "Invalid line speed %d for UMAC",
-				    vars->line_speed);
-			return ELINK_STATUS_ERROR;
-		}
-		vars->link_status |= LINK_STATUS_LINK_UP;
-
-		if (params->loopback_mode == ELINK_LOOPBACK_UMAC)
-			elink_umac_enable(params, vars, 1);
-		else
-			elink_umac_enable(params, vars, 0);
-	} else {
-		/* Link speed >= 10000 requires XMAC enabled */
-		if (params->feature_config_flags &
-		    ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC) {
-			PMD_DRV_LOG(DEBUG, "Invalid line speed %d while XMAC is"
-				    " disabled!", params->req_line_speed[0]);
-			return ELINK_STATUS_ERROR;
-		}
-		/* Check link speed */
-		switch (vars->line_speed) {
-		case ELINK_SPEED_10000:
-			vars->link_status = ELINK_LINK_10GTFD;
-			break;
-		case ELINK_SPEED_20000:
-			vars->link_status = ELINK_LINK_20GTFD;
-			break;
-		default:
-			PMD_DRV_LOG(DEBUG, "Invalid line speed %d for XMAC",
-				    vars->line_speed);
-			return ELINK_STATUS_ERROR;
-		}
-		vars->link_status |= LINK_STATUS_LINK_UP;
-		if (params->loopback_mode == ELINK_LOOPBACK_XMAC)
-			elink_xmac_enable(params, vars, 1);
-		else
-			elink_xmac_enable(params, vars, 0);
-	}
-	return ELINK_STATUS_OK;
-}
-
-static elink_status_t elink_init_emul(struct elink_params *params,
-				      struct elink_vars *vars)
-{
-	struct bnx2x_softc *sc = params->sc;
-	if (CHIP_IS_E3(sc)) {
-		if (elink_init_e3_emul_mac(params, vars) != ELINK_STATUS_OK)
-			return ELINK_STATUS_ERROR;
-	} else {
-		if (params->feature_config_flags &
-		    ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC) {
-			vars->line_speed = ELINK_SPEED_1000;
-			vars->link_status = (LINK_STATUS_LINK_UP |
-					     ELINK_LINK_1000XFD);
-			if (params->loopback_mode == ELINK_LOOPBACK_EMAC)
-				elink_emac_enable(params, vars, 1);
-			else
-				elink_emac_enable(params, vars, 0);
-		} else {
-			vars->line_speed = ELINK_SPEED_10000;
-			vars->link_status = (LINK_STATUS_LINK_UP |
-					     ELINK_LINK_10GTFD);
-			if (params->loopback_mode == ELINK_LOOPBACK_BMAC)
-				elink_bmac_enable(params, vars, 1, 1);
-			else
-				elink_bmac_enable(params, vars, 0, 1);
-		}
-	}
-	vars->link_up = 1;
-	vars->duplex = DUPLEX_FULL;
-	vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
-
-	if (CHIP_IS_E1x(sc))
-		elink_pbf_update(params, vars->flow_ctrl, vars->line_speed);
-	/* Disable drain */
-	REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
-
-	/* update shared memory */
-	elink_update_mng(params, vars->link_status);
-	return ELINK_STATUS_OK;
-}
-#endif
-#ifdef ELINK_INCLUDE_FPGA
-static elink_status_t elink_init_fpga(struct elink_params *params,
-				      struct elink_vars *vars)
-{
-	/* Enable on E1.5 FPGA */
-	struct bnx2x_softc *sc = params->sc;
-	vars->duplex = DUPLEX_FULL;
-	vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
-	vars->flow_ctrl = (ELINK_FLOW_CTRL_TX | ELINK_FLOW_CTRL_RX);
-	vars->link_status |= (LINK_STATUS_TX_FLOW_CONTROL_ENABLED |
-			      LINK_STATUS_RX_FLOW_CONTROL_ENABLED);
-	if (CHIP_IS_E3(sc)) {
-		vars->line_speed = params->req_line_speed[0];
-		switch (vars->line_speed) {
-		case ELINK_SPEED_AUTO_NEG:
-			vars->line_speed = ELINK_SPEED_2500;
-		case ELINK_SPEED_2500:
-			vars->link_status = ELINK_LINK_2500TFD;
-			break;
-		case ELINK_SPEED_1000:
-			vars->link_status = ELINK_LINK_1000XFD;
-			break;
-		case ELINK_SPEED_100:
-			vars->link_status = ELINK_LINK_100TXFD;
-			break;
-		case ELINK_SPEED_10:
-			vars->link_status = ELINK_LINK_10TFD;
-			break;
-		default:
-			PMD_DRV_LOG(DEBUG, "Invalid link speed %d",
-				    params->req_line_speed[0]);
-			return ELINK_STATUS_ERROR;
-		}
-		vars->link_status |= LINK_STATUS_LINK_UP;
-		if (params->loopback_mode == ELINK_LOOPBACK_UMAC)
-			elink_umac_enable(params, vars, 1);
-		else
-			elink_umac_enable(params, vars, 0);
-	} else {
-		vars->line_speed = ELINK_SPEED_10000;
-		vars->link_status = (LINK_STATUS_LINK_UP | ELINK_LINK_10GTFD);
-		if (params->loopback_mode == ELINK_LOOPBACK_EMAC)
-			elink_emac_enable(params, vars, 1);
-		else
-			elink_emac_enable(params, vars, 0);
-	}
-	vars->link_up = 1;
-
-	if (CHIP_IS_E1x(sc))
-		elink_pbf_update(params, vars->flow_ctrl, vars->line_speed);
-	/* Disable drain */
-	REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
-
-	/* Update shared memory */
-	elink_update_mng(params, vars->link_status);
-	return ELINK_STATUS_OK;
-}
-#endif
 static void elink_init_bmac_loopback(struct elink_params *params,
 				     struct elink_vars *vars)
 {
@@ -12236,12 +12002,8 @@ elink_status_t elink_phy_init(struct elink_params *params,
 			ELINK_NIG_MASK_XGXS0_LINK10G |
 			ELINK_NIG_MASK_SERDES0_LINK_STATUS |
 			ELINK_NIG_MASK_MI_INT));
-#ifdef ELINK_INCLUDE_EMUL
-	if (!(params->feature_config_flags &
-	      ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC))
-#endif
 
-		elink_emac_init(params);
+	elink_emac_init(params);
 
 	if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)
 		vars->link_status |= LINK_STATUS_PFC_ENABLED;
@@ -12253,45 +12015,36 @@ elink_status_t elink_phy_init(struct elink_params *params,
 	set_phy_vars(params, vars);
 
 	PMD_DRV_LOG(DEBUG, "Num of phys on board: %d", params->num_phys);
-#ifdef ELINK_INCLUDE_FPGA
-	if (CHIP_REV_IS_FPGA(sc)) {
-		return elink_init_fpga(params, vars);
-	} else
-#endif
-#ifdef ELINK_INCLUDE_EMUL
-	if (CHIP_REV_IS_EMUL(sc)) {
-		return elink_init_emul(params, vars);
-	} else
-#endif
-		switch (params->loopback_mode) {
-		case ELINK_LOOPBACK_BMAC:
-			elink_init_bmac_loopback(params, vars);
-			break;
-		case ELINK_LOOPBACK_EMAC:
-			elink_init_emac_loopback(params, vars);
-			break;
-		case ELINK_LOOPBACK_XMAC:
-			elink_init_xmac_loopback(params, vars);
-			break;
-		case ELINK_LOOPBACK_UMAC:
-			elink_init_umac_loopback(params, vars);
-			break;
-		case ELINK_LOOPBACK_XGXS:
-		case ELINK_LOOPBACK_EXT_PHY:
-			elink_init_xgxs_loopback(params, vars);
-			break;
-		default:
-			if (!CHIP_IS_E3(sc)) {
-				if (params->switch_cfg == ELINK_SWITCH_CFG_10G)
-					elink_xgxs_deassert(params);
-				else
-					elink_serdes_deassert(sc, params->port);
-			}
-			elink_link_initialize(params, vars);
-			DELAY(1000 * 30);
-			elink_link_int_enable(params);
-			break;
+
+	switch (params->loopback_mode) {
+	case ELINK_LOOPBACK_BMAC:
+		elink_init_bmac_loopback(params, vars);
+		break;
+	case ELINK_LOOPBACK_EMAC:
+		elink_init_emac_loopback(params, vars);
+		break;
+	case ELINK_LOOPBACK_XMAC:
+		elink_init_xmac_loopback(params, vars);
+		break;
+	case ELINK_LOOPBACK_UMAC:
+		elink_init_umac_loopback(params, vars);
+		break;
+	case ELINK_LOOPBACK_XGXS:
+	case ELINK_LOOPBACK_EXT_PHY:
+		elink_init_xgxs_loopback(params, vars);
+		break;
+	default:
+		if (!CHIP_IS_E3(sc)) {
+			if (params->switch_cfg == ELINK_SWITCH_CFG_10G)
+				elink_xgxs_deassert(params);
+			else
+				elink_serdes_deassert(sc, params->port);
 		}
+		elink_link_initialize(params, vars);
+		DELAY(1000 * 30);
+		elink_link_int_enable(params);
+		break;
+	}
 	elink_update_mng(params, vars->link_status);
 
 	elink_update_mng_eee(params, vars->eee_status);
@@ -12325,22 +12078,12 @@ static elink_status_t elink_link_reset(struct elink_params *params,
 		REG_WR(sc, NIG_REG_BMAC0_OUT_EN + port * 4, 0);
 		REG_WR(sc, NIG_REG_EGRESS_EMAC0_OUT_EN + port * 4, 0);
 	}
-#ifdef ELINK_INCLUDE_EMUL
-	/* Stop BigMac rx */
-	if (!(params->feature_config_flags &
-	      ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC))
-#endif
-		if (!CHIP_IS_E3(sc))
-			elink_set_bmac_rx(sc, port, 0);
-#ifdef ELINK_INCLUDE_EMUL
-	/* Stop XMAC/UMAC rx */
-	if (!(params->feature_config_flags &
-	      ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC))
-#endif
-		if (CHIP_IS_E3(sc) && !CHIP_REV_IS_FPGA(sc)) {
-			elink_set_xmac_rxtx(params, 0);
-			elink_set_umac_rxtx(params, 0);
-		}
+	if (!CHIP_IS_E3(sc))
+		elink_set_bmac_rx(sc, port, 0);
+	if (CHIP_IS_E3(sc) && !CHIP_REV_IS_FPGA(sc)) {
+		elink_set_xmac_rxtx(params, 0);
+		elink_set_umac_rxtx(params, 0);
+	}
 	/* Disable emac */
 	if (!CHIP_IS_E3(sc))
 		REG_WR(sc, NIG_REG_NIG_EMAC0_EN + port * 4, 0);
@@ -12376,14 +12119,11 @@ static elink_status_t elink_link_reset(struct elink_params *params,
 		elink_bits_dis(sc, NIG_REG_LATCH_BC_0 + port * 4,
 			       1 << ELINK_NIG_LATCH_BC_ENABLE_MI_INT);
 	}
-#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA)
-	if (!CHIP_REV_IS_SLOW(sc))
-#endif
-		if (params->phy[ELINK_INT_PHY].link_reset)
-			params->phy[ELINK_INT_PHY].link_reset(&params->
-							      phy
-							      [ELINK_INT_PHY],
-							      params);
+	if (params->phy[ELINK_INT_PHY].link_reset)
+		params->phy[ELINK_INT_PHY].link_reset(&params->
+						      phy
+						      [ELINK_INT_PHY],
+						      params);
 
 	/* Disable nig ingress interface */
 	if (!CHIP_IS_E3(sc)) {
@@ -12868,10 +12608,6 @@ elink_status_t elink_common_init_phy(struct bnx2x_softc * sc,
 	uint32_t phy_ver, val;
 	uint8_t phy_index = 0;
 	uint32_t ext_phy_type, ext_phy_config;
-#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA)
-	if (CHIP_REV_IS_EMUL(sc) || CHIP_REV_IS_FPGA(sc))
-		return ELINK_STATUS_OK;
-#endif
 
 	elink_set_mdio_clk(sc, GRCBASE_EMAC0);
 	elink_set_mdio_clk(sc, GRCBASE_EMAC1);
diff --git a/drivers/net/bnx2x/elink.h b/drivers/net/bnx2x/elink.h
index c4f886a..9401b7c 100644
--- a/drivers/net/bnx2x/elink.h
+++ b/drivers/net/bnx2x/elink.h
@@ -359,10 +359,6 @@ struct elink_params {
 #define ELINK_FEATURE_CONFIG_PFC_ENABLED			(1<<1)
 #define ELINK_FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY		(1<<2)
 #define ELINK_FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY	(1<<3)
-#define ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC			(1<<4)
-#define ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC			(1<<5)
-#define ELINK_FEATURE_CONFIG_EMUL_DISABLE_UMAC			(1<<6)
-#define ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC			(1<<7)
 #define ELINK_FEATURE_CONFIG_BC_SUPPORTS_AFEX			(1<<8)
 #define ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED		(1<<9)
 #define ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED	(1<<10)
-- 
2.7.4

[dpdk-dev] [PATCH v3 03/10] net/bnx2x: remove delay during device startup

[Chas Williams]

This 2.5s delay doesn't seem to serve any purpose other than a being a
pause after logging the device configuration.

Fixes: 540a211084a7 ("bnx2x: driver core")

Signed-off-by: Chas Williams <3chas3@gmail.com>
---
 drivers/net/bnx2x/bnx2x_ethdev.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c b/drivers/net/bnx2x/bnx2x_ethdev.c
index dcd2d77..62595c2 100644
--- a/drivers/net/bnx2x/bnx2x_ethdev.c
+++ b/drivers/net/bnx2x/bnx2x_ethdev.c
@@ -203,8 +203,6 @@ bnx2x_dev_start(struct rte_eth_dev *dev)
 	/* Print important adapter info for the user. */
 	bnx2x_print_adapter_info(sc);
 
-	DELAY_MS(2500);
-
 	return ret;
 }
 
-- 
2.7.4

[dpdk-dev] [PATCH v3 04/10] net/bnx2x: remove unused RX queue code

[Chas Williams]

Fixes: 540a211084a7 ("bnx2x: driver core")

Signed-off-by: Chas Williams <3chas3@gmail.com>
---
 drivers/net/bnx2x/bnx2x_rxtx.c | 13 +++----------
 drivers/net/bnx2x/bnx2x_rxtx.h |  6 ------
 2 files changed, 3 insertions(+), 16 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x_rxtx.c b/drivers/net/bnx2x/bnx2x_rxtx.c
index 0ec4f89..8ce48ab 100644
--- a/drivers/net/bnx2x/bnx2x_rxtx.c
+++ b/drivers/net/bnx2x/bnx2x_rxtx.c
@@ -59,7 +59,7 @@ bnx2x_dev_rx_queue_setup(struct rte_eth_dev *dev,
 		       uint16_t queue_idx,
 		       uint16_t nb_desc,
 		       unsigned int socket_id,
-		       const struct rte_eth_rxconf *rx_conf,
+		       __rte_unused const struct rte_eth_rxconf *rx_conf,
 		       struct rte_mempool *mp)
 {
 	uint16_t j, idx;
@@ -84,7 +84,6 @@ bnx2x_dev_rx_queue_setup(struct rte_eth_dev *dev,
 	rxq->mb_pool = mp;
 	rxq->queue_id = queue_idx;
 	rxq->port_id = dev->data->port_id;
-	rxq->crc_len = (uint8_t)((dev->data->dev_conf.rxmode.hw_strip_crc) ? 0 : ETHER_CRC_LEN);
 
 	rxq->nb_rx_pages = 1;
 	while (USABLE_RX_BD(rxq) < nb_desc)
@@ -94,13 +93,9 @@ bnx2x_dev_rx_queue_setup(struct rte_eth_dev *dev,
 	sc->rx_ring_size = USABLE_RX_BD(rxq);
 	rxq->nb_cq_pages = RCQ_BD_PAGES(rxq);
 
-	rxq->rx_free_thresh = rx_conf->rx_free_thresh ?
-		rx_conf->rx_free_thresh : DEFAULT_RX_FREE_THRESH;
-
-	PMD_INIT_LOG(DEBUG, "fp[%02d] req_bd=%u, thresh=%u, usable_bd=%lu, "
+	PMD_INIT_LOG(DEBUG, "fp[%02d] req_bd=%u, usable_bd=%lu, "
 		       "total_bd=%lu, rx_pages=%u, cq_pages=%u",
-		       queue_idx, nb_desc, rxq->rx_free_thresh,
-		       (unsigned long)USABLE_RX_BD(rxq),
+		       queue_idx, nb_desc, (unsigned long)USABLE_RX_BD(rxq),
 		       (unsigned long)TOTAL_RX_BD(rxq), rxq->nb_rx_pages,
 		       rxq->nb_cq_pages);
 
@@ -135,7 +130,6 @@ bnx2x_dev_rx_queue_setup(struct rte_eth_dev *dev,
 	}
 
 	/* Initialize software ring entries */
-	rxq->rx_mbuf_alloc = 0;
 	for (idx = 0; idx < rxq->nb_rx_desc; idx = NEXT_RX_BD(idx)) {
 		mbuf = rte_mbuf_raw_alloc(mp);
 		if (NULL == mbuf) {
@@ -146,7 +140,6 @@ bnx2x_dev_rx_queue_setup(struct rte_eth_dev *dev,
 		}
 		rxq->sw_ring[idx] = mbuf;
 		rxq->rx_ring[idx] = mbuf->buf_physaddr;
-		rxq->rx_mbuf_alloc++;
 	}
 	rxq->pkt_first_seg = NULL;
 	rxq->pkt_last_seg = NULL;
diff --git a/drivers/net/bnx2x/bnx2x_rxtx.h b/drivers/net/bnx2x/bnx2x_rxtx.h
index ccb22fc..dd251aa 100644
--- a/drivers/net/bnx2x/bnx2x_rxtx.h
+++ b/drivers/net/bnx2x/bnx2x_rxtx.h
@@ -11,8 +11,6 @@
 #ifndef _BNX2X_RXTX_H_
 #define _BNX2X_RXTX_H_
 
-
-#define DEFAULT_RX_FREE_THRESH   0
 #define DEFAULT_TX_FREE_THRESH   512
 #define RTE_PMD_BNX2X_TX_MAX_BURST 1
 
@@ -42,13 +40,9 @@ struct bnx2x_rx_queue {
 	uint16_t                   rx_bd_tail;           /**< Index of last rx bd. */
 	uint16_t                   rx_cq_head;           /**< Index of current rcq bd. */
 	uint16_t                   rx_cq_tail;           /**< Index of last rcq bd. */
-	uint16_t                   nb_rx_hold;           /**< number of held free RX desc. */
-	uint16_t                   rx_free_thresh;       /**< max free RX desc to hold. */
 	uint16_t                   queue_id;             /**< RX queue index. */
 	uint8_t                    port_id;              /**< Device port identifier. */
-	uint8_t                    crc_len;              /**< 0 if CRC stripped, 4 otherwise. */
 	struct bnx2x_softc           *sc;                  /**< Ptr to dev_private data. */
-	uint64_t                   rx_mbuf_alloc;        /**< Number of allocated mbufs. */
 };
 
 /**
-- 
2.7.4

[dpdk-dev] [PATCH v3 05/10] net/bnx2x: restrict RX mask flags sent to the PF

[Chas Williams]

Don't use bnx2x_fill_accept_flags() to fill the RX mask in the VF
since the PF only handles a subset of the existing flags.  now,
bnx2x_fill_accept_flags() can be static.

Fixes: 540a211084a7 ("bnx2x: driver core")

Signed-off-by: Chas Williams <3chas3@gmail.com>
---
 drivers/net/bnx2x/bnx2x.c      |  6 +++---
 drivers/net/bnx2x/bnx2x.h      |  2 --
 drivers/net/bnx2x/bnx2x_vfpf.c | 23 +++++++++++++++++++++--
 drivers/net/bnx2x/bnx2x_vfpf.h |  7 +++++++
 4 files changed, 31 insertions(+), 7 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x.c b/drivers/net/bnx2x/bnx2x.c
index bfcc087..682657b 100644
--- a/drivers/net/bnx2x/bnx2x.c
+++ b/drivers/net/bnx2x/bnx2x.c
@@ -1397,10 +1397,10 @@ bnx2x_del_all_macs(struct bnx2x_softc *sc, struct ecore_vlan_mac_obj *mac_obj,
 	return rc;
 }
 
-int
+static int
 bnx2x_fill_accept_flags(struct bnx2x_softc *sc, uint32_t rx_mode,
-		      unsigned long *rx_accept_flags,
-		      unsigned long *tx_accept_flags)
+			unsigned long *rx_accept_flags,
+			unsigned long *tx_accept_flags)
 {
 	/* Clear the flags first */
 	*rx_accept_flags = 0;
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index ed7c55f..712ee6c 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -1880,8 +1880,6 @@ int bnx2x_vf_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
 	int leading);
 void bnx2x_free_hsi_mem(struct bnx2x_softc *sc);
 int bnx2x_vf_set_rx_mode(struct bnx2x_softc *sc);
-int bnx2x_fill_accept_flags(struct bnx2x_softc *sc, uint32_t rx_mode,
-	unsigned long *rx_accept_flags, unsigned long *tx_accept_flags);
 int bnx2x_check_bull(struct bnx2x_softc *sc);
 
 //#define BNX2X_PULSE
diff --git a/drivers/net/bnx2x/bnx2x_vfpf.c b/drivers/net/bnx2x/bnx2x_vfpf.c
index 1c895f8..df145d3 100644
--- a/drivers/net/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/bnx2x/bnx2x_vfpf.c
@@ -576,7 +576,6 @@ bnx2x_vf_set_rx_mode(struct bnx2x_softc *sc)
 {
 	struct vf_set_q_filters_tlv *query;
 	struct vf_common_reply_tlv *reply = &sc->vf2pf_mbox->resp.common_reply;
-	unsigned long tx_mask;
 
 	query = &sc->vf2pf_mbox->query[0].set_q_filters;
 	bnx2x_init_first_tlv(sc, &query->first_tlv, BNX2X_VF_TLV_SET_Q_FILTERS,
@@ -585,7 +584,27 @@ bnx2x_vf_set_rx_mode(struct bnx2x_softc *sc)
 	query->vf_qid = 0;
 	query->flags = BNX2X_VF_RX_MASK_CHANGED;
 
-	if (bnx2x_fill_accept_flags(sc, sc->rx_mode, &query->rx_mask, &tx_mask)) {
+	switch (sc->rx_mode) {
+	case BNX2X_RX_MODE_NONE: /* no Rx */
+		query->rx_mask = VFPF_RX_MASK_ACCEPT_NONE;
+		break;
+	case BNX2X_RX_MODE_NORMAL:
+		query->rx_mask = VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST;
+		query->rx_mask |= VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST;
+		query->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST;
+		break;
+	case BNX2X_RX_MODE_ALLMULTI:
+		query->rx_mask = VFPF_RX_MASK_ACCEPT_ALL_MULTICAST;
+		query->rx_mask |= VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST;
+		query->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST;
+		break;
+	case BNX2X_RX_MODE_PROMISC:
+		query->rx_mask = VFPF_RX_MASK_ACCEPT_ALL_UNICAST;
+		query->rx_mask |= VFPF_RX_MASK_ACCEPT_ALL_MULTICAST;
+		query->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST;
+		break;
+	default:
+		PMD_DRV_LOG(ERR, "BAD rx mode (%d)", sc->rx_mode);
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/bnx2x/bnx2x_vfpf.h b/drivers/net/bnx2x/bnx2x_vfpf.h
index f854d81..49afd87 100644
--- a/drivers/net/bnx2x/bnx2x_vfpf.h
+++ b/drivers/net/bnx2x/bnx2x_vfpf.h
@@ -40,6 +40,13 @@ struct vf_resource_query {
 
 #define TLV_BUFFER_SIZE			1024
 
+#define VFPF_RX_MASK_ACCEPT_NONE		0x00000000
+#define VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST	0x00000001
+#define VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST	0x00000002
+#define VFPF_RX_MASK_ACCEPT_ALL_UNICAST		0x00000004
+#define VFPF_RX_MASK_ACCEPT_ALL_MULTICAST	0x00000008
+#define VFPF_RX_MASK_ACCEPT_BROADCAST		0x00000010
+
 /* general tlv header (used for both vf->pf request and pf->vf response) */
 struct channel_tlv {
 	uint16_t type;
-- 
2.7.4

[dpdk-dev] [PATCH v3 06/10] net/bnx2x: replace macro with static function

[Chas Williams]

Replace BNX2X_TLV_APPEND() with the clearer and safer bnx2x_add_tlv().
bnx2x_add_tlv() was previously prototyped at some point but can be static.

Fixes: 540a211084a7 ("bnx2x: driver core")

Signed-off-by: Chas Williams <3chas3@gmail.com>
---
 drivers/net/bnx2x/bnx2x_vfpf.c | 80 +++++++++++++++++++++++++-----------------
 drivers/net/bnx2x/bnx2x_vfpf.h | 10 ++----
 2 files changed, 50 insertions(+), 40 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x_vfpf.c b/drivers/net/bnx2x/bnx2x_vfpf.c
index df145d3..c8bcc69 100644
--- a/drivers/net/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/bnx2x/bnx2x_vfpf.c
@@ -64,25 +64,32 @@ bnx2x_check_bull(struct bnx2x_softc *sc)
 	return TRUE;
 }
 
-/* add tlv to a buffer */
-#define BNX2X_TLV_APPEND(_tlvs, _offset, _type, _length) \
-	((struct vf_first_tlv *)((unsigned long)_tlvs + _offset))->type   = _type; \
-	((struct vf_first_tlv *)((unsigned long)_tlvs + _offset))->length = _length
+/* place a given tlv on the tlv buffer at a given offset */
+static void
+bnx2x_add_tlv(__rte_unused struct bnx2x_softc *sc, void *tlvs_list,
+	      uint16_t offset, uint16_t type, uint16_t length)
+{
+	struct channel_tlv *tl = (struct channel_tlv *)
+					((unsigned long)tlvs_list + offset);
+
+	tl->type = type;
+	tl->length = length;
+}
 
 /* Initiliaze header of the first tlv and clear mailbox*/
 static void
-bnx2x_init_first_tlv(struct bnx2x_softc *sc, struct vf_first_tlv *tlv,
-	uint16_t type, uint16_t len)
+bnx2x_init_first_tlv(struct bnx2x_softc *sc, struct vf_first_tlv *first_tlv,
+	uint16_t type, uint16_t length)
 {
 	struct bnx2x_vf_mbx_msg *mbox = sc->vf2pf_mbox;
 	PMD_DRV_LOG(DEBUG, "Preparing %d tlv for sending", type);
 
 	memset(mbox, 0, sizeof(struct bnx2x_vf_mbx_msg));
 
-	BNX2X_TLV_APPEND(tlv, 0, type, len);
+	bnx2x_add_tlv(sc, &first_tlv->tl, 0, type, length);
 
 	/* Initialize header of the first tlv */
-	tlv->reply_offset = sizeof(mbox->query);
+	first_tlv->reply_offset = sizeof(mbox->query);
 }
 
 #define BNX2X_VF_CMD_ADDR_LO PXP_VF_ADDR_CSDM_GLOBAL_START
@@ -256,14 +263,14 @@ int bnx2x_vf_get_resources(struct bnx2x_softc *sc, uint8_t tx_count, uint8_t rx_
 	acq->bulletin_addr = sc->pf2vf_bulletin_mapping.paddr;
 
 	/* Request physical port identifier */
-	BNX2X_TLV_APPEND(acq, acq->first_tlv.length,
-			 BNX2X_VF_TLV_PHYS_PORT_ID,
-			 sizeof(struct channel_tlv));
+	bnx2x_add_tlv(sc, acq, acq->first_tlv.tl.length,
+		      BNX2X_VF_TLV_PHYS_PORT_ID,
+		      sizeof(struct channel_tlv));
 
-	BNX2X_TLV_APPEND(acq,
-			 (acq->first_tlv.length + sizeof(struct channel_tlv)),
-			 BNX2X_VF_TLV_LIST_END,
-			 sizeof(struct channel_list_end_tlv));
+	bnx2x_add_tlv(sc, acq,
+		      (acq->first_tlv.tl.length + sizeof(struct channel_tlv)),
+		      BNX2X_VF_TLV_LIST_END,
+		      sizeof(struct channel_list_end_tlv));
 
 	/* requesting the resources in loop */
 	obtain_status = bnx2x_loop_obtain_resources(sc);
@@ -316,8 +323,9 @@ bnx2x_vf_close(struct bnx2x_softc *sc)
 				sizeof(*query));
 
 		query->vf_id = vf_id;
-		BNX2X_TLV_APPEND(query, query->first_tlv.length, BNX2X_VF_TLV_LIST_END,
-				sizeof(struct channel_list_end_tlv));
+		bnx2x_add_tlv(sc, query, query->first_tlv.tl.length,
+			      BNX2X_VF_TLV_LIST_END,
+			      sizeof(struct channel_list_end_tlv));
 
 		bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
 		if (reply->status != BNX2X_VF_STATUS_SUCCESS)
@@ -345,8 +353,9 @@ bnx2x_vf_init(struct bnx2x_softc *sc)
 	query->stats_addr = sc->fw_stats_data_mapping +
 		offsetof(struct bnx2x_fw_stats_data, queue_stats);
 
-	BNX2X_TLV_APPEND(query, query->first_tlv.length, BNX2X_VF_TLV_LIST_END,
-			sizeof(struct channel_list_end_tlv));
+	bnx2x_add_tlv(sc, query, query->first_tlv.tl.length,
+		      BNX2X_VF_TLV_LIST_END,
+		      sizeof(struct channel_list_end_tlv));
 
 	bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
 	if (reply->status != BNX2X_VF_STATUS_SUCCESS) {
@@ -376,9 +385,10 @@ bnx2x_vf_unload(struct bnx2x_softc *sc)
 
 			query_op->vf_qid = i;
 
-			BNX2X_TLV_APPEND(query_op, query_op->first_tlv.length,
-					BNX2X_VF_TLV_LIST_END,
-					sizeof(struct channel_list_end_tlv));
+			bnx2x_add_tlv(sc, query_op,
+				      query_op->first_tlv.tl.length,
+				      BNX2X_VF_TLV_LIST_END,
+				      sizeof(struct channel_list_end_tlv));
 
 			bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
 			if (reply->status != BNX2X_VF_STATUS_SUCCESS)
@@ -394,9 +404,9 @@ bnx2x_vf_unload(struct bnx2x_softc *sc)
 
 		query->vf_id = vf_id;
 
-		BNX2X_TLV_APPEND(query, query->first_tlv.length,
-				BNX2X_VF_TLV_LIST_END,
-				sizeof(struct channel_list_end_tlv));
+		bnx2x_add_tlv(sc, query, query->first_tlv.tl.length,
+			      BNX2X_VF_TLV_LIST_END,
+			      sizeof(struct channel_list_end_tlv));
 
 		bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
 		if (reply->status != BNX2X_VF_STATUS_SUCCESS)
@@ -477,8 +487,9 @@ bnx2x_vf_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp, int lead
 	bnx2x_vf_rx_q_prep(sc, fp, &query->rxq, flags);
 	bnx2x_vf_tx_q_prep(sc, fp, &query->txq, flags);
 
-	BNX2X_TLV_APPEND(query, query->first_tlv.length, BNX2X_VF_TLV_LIST_END,
-			sizeof(struct channel_list_end_tlv));
+	bnx2x_add_tlv(sc, query, query->first_tlv.tl.length,
+		      BNX2X_VF_TLV_LIST_END,
+		      sizeof(struct channel_list_end_tlv));
 
 	bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
 	if (reply->status != BNX2X_VF_STATUS_SUCCESS) {
@@ -511,8 +522,9 @@ bnx2x_vf_set_mac(struct bnx2x_softc *sc, int set)
 
 	rte_memcpy(query->filters[0].mac, sc->link_params.mac_addr, ETH_ALEN);
 
-	BNX2X_TLV_APPEND(query, query->first_tlv.length, BNX2X_VF_TLV_LIST_END,
-			sizeof(struct channel_list_end_tlv));
+	bnx2x_add_tlv(sc, query, query->first_tlv.tl.length,
+		      BNX2X_VF_TLV_LIST_END,
+		      sizeof(struct channel_list_end_tlv));
 
 	bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
 	reply = &sc->vf2pf_mbox->resp.common_reply;
@@ -550,8 +562,9 @@ bnx2x_vf_config_rss(struct bnx2x_softc *sc,
 			sizeof(*query));
 
 	/* add list termination tlv */
-	BNX2X_TLV_APPEND(query, query->first_tlv.length, BNX2X_VF_TLV_LIST_END,
-			sizeof(struct channel_list_end_tlv));
+	bnx2x_add_tlv(sc, query, query->first_tlv.tl.length,
+		      BNX2X_VF_TLV_LIST_END,
+		      sizeof(struct channel_list_end_tlv));
 
 	rte_memcpy(query->rss_key, params->rss_key, sizeof(params->rss_key));
 	query->rss_key_size = T_ETH_RSS_KEY;
@@ -608,8 +621,9 @@ bnx2x_vf_set_rx_mode(struct bnx2x_softc *sc)
 		return -EINVAL;
 	}
 
-	BNX2X_TLV_APPEND(query, query->first_tlv.length, BNX2X_VF_TLV_LIST_END,
-			sizeof(struct channel_list_end_tlv));
+	bnx2x_add_tlv(sc, query, query->first_tlv.tl.length,
+		      BNX2X_VF_TLV_LIST_END,
+		      sizeof(struct channel_list_end_tlv));
 
 	bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
 	if (reply->status != BNX2X_VF_STATUS_SUCCESS) {
diff --git a/drivers/net/bnx2x/bnx2x_vfpf.h b/drivers/net/bnx2x/bnx2x_vfpf.h
index 49afd87..955ea98 100644
--- a/drivers/net/bnx2x/bnx2x_vfpf.h
+++ b/drivers/net/bnx2x/bnx2x_vfpf.h
@@ -54,8 +54,7 @@ struct channel_tlv {
 };
 
 struct vf_first_tlv {
-	uint16_t type;
-	uint16_t length;
+	struct channel_tlv tl;
 	uint32_t reply_offset;
 };
 
@@ -65,16 +64,14 @@ struct tlv_buffer_size {
 
 /* tlv struct for all PF replies except acquire */
 struct vf_common_reply_tlv {
-	uint16_t type;
-	uint16_t length;
+	struct channel_tlv tl;
 	uint8_t status;
 	uint8_t pad[3];
 };
 
 /* used to terminate and pad a tlv list */
 struct channel_list_end_tlv {
-	uint16_t type;
-	uint16_t length;
+	struct channel_tlv tl;
 	uint32_t pad;
 };
 
@@ -334,7 +331,6 @@ struct bnx2x_vf_mbx_msg {
 	union resp_tlvs resp;
 };
 
-void bnx2x_add_tlv(void *tlvs_list, uint16_t offset, uint16_t type, uint16_t length);
 int bnx2x_vf_set_mac(struct bnx2x_softc *sc, int set);
 int bnx2x_vf_config_rss(struct bnx2x_softc *sc, struct ecore_config_rss_params *params);
 
-- 
2.7.4

[dpdk-dev] [PATCH v3 07/10] net/bnx2x: serialize access to pf2vf mailbox

[Chas Williams]

The pf2vf mailbox can only be used by one thread at a time.

Fixes: 540a211084a7 ("bnx2x: driver core")

Signed-off-by: Chas Williams <3chas3@gmail.com>
---
 drivers/net/bnx2x/bnx2x.h        |  12 +++--
 drivers/net/bnx2x/bnx2x_ethdev.c |   2 +
 drivers/net/bnx2x/bnx2x_vfpf.c   | 113 +++++++++++++++++++++++++++------------
 3 files changed, 88 insertions(+), 39 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 712ee6c..e4979ac 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -17,6 +17,7 @@
 #define __BNX2X_H__
 
 #include <rte_byteorder.h>
+#include <rte_spinlock.h>
 
 #if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
 #ifndef __LITTLE_ENDIAN
@@ -1028,12 +1029,13 @@ struct bnx2x_softc {
 	struct bnx2x_mac_ops mac_ops;
 
 	/* structures for VF mbox/response/bulletin */
-	struct bnx2x_vf_mbx_msg	*vf2pf_mbox;
-	struct bnx2x_dma		vf2pf_mbox_mapping;
-	struct vf_acquire_resp_tlv acquire_resp;
+	struct bnx2x_vf_mbx_msg		*vf2pf_mbox;
+	struct bnx2x_dma		 vf2pf_mbox_mapping;
+	struct vf_acquire_resp_tlv	 acquire_resp;
 	struct bnx2x_vf_bulletin	*pf2vf_bulletin;
-	struct bnx2x_dma		pf2vf_bulletin_mapping;
-	struct bnx2x_vf_bulletin	old_bulletin;
+	struct bnx2x_dma		 pf2vf_bulletin_mapping;
+	struct bnx2x_vf_bulletin	 old_bulletin;
+	rte_spinlock_t			 vf2pf_lock;
 
 	int             media;
 
diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c b/drivers/net/bnx2x/bnx2x_ethdev.c
index 62595c2..f086188 100644
--- a/drivers/net/bnx2x/bnx2x_ethdev.c
+++ b/drivers/net/bnx2x/bnx2x_ethdev.c
@@ -575,6 +575,8 @@ bnx2x_common_dev_init(struct rte_eth_dev *eth_dev, int is_vf)
 			eth_dev->data->port_id, pci_dev->id.vendor_id, pci_dev->id.device_id);
 
 	if (IS_VF(sc)) {
+		rte_spinlock_init(&sc->vf2pf_lock);
+
 		if (bnx2x_dma_alloc(sc, sizeof(struct bnx2x_vf_mbx_msg),
 				    &sc->vf2pf_mbox_mapping, "vf2pf_mbox",
 				    RTE_CACHE_LINE_SIZE) != 0)
diff --git a/drivers/net/bnx2x/bnx2x_vfpf.c b/drivers/net/bnx2x/bnx2x_vfpf.c
index c8bcc69..340422d 100644
--- a/drivers/net/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/bnx2x/bnx2x_vfpf.c
@@ -78,10 +78,13 @@ bnx2x_add_tlv(__rte_unused struct bnx2x_softc *sc, void *tlvs_list,
 
 /* Initiliaze header of the first tlv and clear mailbox*/
 static void
-bnx2x_init_first_tlv(struct bnx2x_softc *sc, struct vf_first_tlv *first_tlv,
-	uint16_t type, uint16_t length)
+bnx2x_vf_prep(struct bnx2x_softc *sc, struct vf_first_tlv *first_tlv,
+	      uint16_t type, uint16_t length)
 {
 	struct bnx2x_vf_mbx_msg *mbox = sc->vf2pf_mbox;
+
+	rte_spinlock_lock(&sc->vf2pf_lock);
+
 	PMD_DRV_LOG(DEBUG, "Preparing %d tlv for sending", type);
 
 	memset(mbox, 0, sizeof(struct bnx2x_vf_mbx_msg));
@@ -92,6 +95,17 @@ bnx2x_init_first_tlv(struct bnx2x_softc *sc, struct vf_first_tlv *first_tlv,
 	first_tlv->reply_offset = sizeof(mbox->query);
 }
 
+/* releases the mailbox */
+static void
+bnx2x_vf_finalize(struct bnx2x_softc *sc,
+		  __rte_unused struct vf_first_tlv *first_tlv)
+{
+	PMD_DRV_LOG(DEBUG, "done sending [%d] tlv over vf pf channel",
+		    first_tlv->tl.type);
+
+	rte_spinlock_unlock(&sc->vf2pf_lock);
+}
+
 #define BNX2X_VF_CMD_ADDR_LO PXP_VF_ADDR_CSDM_GLOBAL_START
 #define BNX2X_VF_CMD_ADDR_HI BNX2X_VF_CMD_ADDR_LO + 4
 #define BNX2X_VF_CMD_TRIGGER BNX2X_VF_CMD_ADDR_HI + 4
@@ -244,13 +258,16 @@ int bnx2x_vf_get_resources(struct bnx2x_softc *sc, uint8_t tx_count, uint8_t rx_
 	struct vf_acquire_tlv *acq = &sc->vf2pf_mbox->query[0].acquire;
 	int vf_id;
 	struct bnx2x_obtain_status obtain_status;
+	int rc = 0;
 
 	bnx2x_vf_close(sc);
-	bnx2x_init_first_tlv(sc, &acq->first_tlv, BNX2X_VF_TLV_ACQUIRE, sizeof(*acq));
+	bnx2x_vf_prep(sc, &acq->first_tlv, BNX2X_VF_TLV_ACQUIRE, sizeof(*acq));
 
 	vf_id = bnx2x_read_vf_id(sc);
-	if (vf_id < 0)
-		return -EAGAIN;
+	if (vf_id < 0) {
+		rc = -EAGAIN;
+		goto out;
+	}
 
 	acq->vf_id = vf_id;
 
@@ -274,8 +291,10 @@ int bnx2x_vf_get_resources(struct bnx2x_softc *sc, uint8_t tx_count, uint8_t rx_
 
 	/* requesting the resources in loop */
 	obtain_status = bnx2x_loop_obtain_resources(sc);
-	if (!obtain_status.success)
-		return obtain_status.err_code;
+	if (!obtain_status.success) {
+		rc = obtain_status.err_code;
+		goto out;
+	}
 
 	struct vf_acquire_resp_tlv sc_resp = sc->acquire_resp;
 
@@ -306,7 +325,10 @@ int bnx2x_vf_get_resources(struct bnx2x_softc *sc, uint8_t tx_count, uint8_t rx_
 	else
 		eth_random_addr(sc->link_params.mac_addr);
 
-	return 0;
+out:
+	bnx2x_vf_finalize(sc, &acq->first_tlv);
+
+	return rc;
 }
 
 /* Ask PF to release VF's resources */
@@ -319,8 +341,8 @@ bnx2x_vf_close(struct bnx2x_softc *sc)
 
 	if (vf_id >= 0) {
 		query = &sc->vf2pf_mbox->query[0].release;
-		bnx2x_init_first_tlv(sc, &query->first_tlv, BNX2X_VF_TLV_RELEASE,
-				sizeof(*query));
+		bnx2x_vf_prep(sc, &query->first_tlv, BNX2X_VF_TLV_RELEASE,
+			      sizeof(*query));
 
 		query->vf_id = vf_id;
 		bnx2x_add_tlv(sc, query, query->first_tlv.tl.length,
@@ -330,6 +352,8 @@ bnx2x_vf_close(struct bnx2x_softc *sc)
 		bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
 		if (reply->status != BNX2X_VF_STATUS_SUCCESS)
 			PMD_DRV_LOG(ERR, "Failed to release VF");
+
+		bnx2x_vf_finalize(sc, &query->first_tlv);
 	}
 }
 
@@ -339,11 +363,11 @@ bnx2x_vf_init(struct bnx2x_softc *sc)
 {
 	struct vf_init_tlv *query;
 	struct vf_common_reply_tlv *reply = &sc->vf2pf_mbox->resp.common_reply;
-	int i;
+	int i, rc = 0;
 
 	query = &sc->vf2pf_mbox->query[0].init;
-	bnx2x_init_first_tlv(sc, &query->first_tlv, BNX2X_VF_TLV_INIT,
-			sizeof(*query));
+	bnx2x_vf_prep(sc, &query->first_tlv, BNX2X_VF_TLV_INIT,
+		      sizeof(*query));
 
 	FOR_EACH_QUEUE(sc, i) {
 		query->sb_addr[i] = (unsigned long)(sc->fp[i].sb_dma.paddr);
@@ -360,11 +384,14 @@ bnx2x_vf_init(struct bnx2x_softc *sc)
 	bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
 	if (reply->status != BNX2X_VF_STATUS_SUCCESS) {
 		PMD_DRV_LOG(ERR, "Failed to init VF");
-		return -EINVAL;
+		rc = -EINVAL;
+		goto out;
 	}
 
 	PMD_DRV_LOG(DEBUG, "VF was initialized");
-	return 0;
+out:
+	bnx2x_vf_finalize(sc, &query->first_tlv);
+	return rc;
 }
 
 void
@@ -379,9 +406,9 @@ bnx2x_vf_unload(struct bnx2x_softc *sc)
 	if (vf_id > 0) {
 		FOR_EACH_QUEUE(sc, i) {
 			query_op = &sc->vf2pf_mbox->query[0].q_op;
-			bnx2x_init_first_tlv(sc, &query_op->first_tlv,
-					BNX2X_VF_TLV_TEARDOWN_Q,
-					sizeof(*query_op));
+			bnx2x_vf_prep(sc, &query_op->first_tlv,
+				      BNX2X_VF_TLV_TEARDOWN_Q,
+				      sizeof(*query_op));
 
 			query_op->vf_qid = i;
 
@@ -394,13 +421,15 @@ bnx2x_vf_unload(struct bnx2x_softc *sc)
 			if (reply->status != BNX2X_VF_STATUS_SUCCESS)
 				PMD_DRV_LOG(ERR,
 					    "Bad reply for vf_q %d teardown", i);
+
+			bnx2x_vf_finalize(sc, &query_op->first_tlv);
 		}
 
 		bnx2x_vf_set_mac(sc, false);
 
 		query = &sc->vf2pf_mbox->query[0].close;
-		bnx2x_init_first_tlv(sc, &query->first_tlv, BNX2X_VF_TLV_CLOSE,
-				sizeof(*query));
+		bnx2x_vf_prep(sc, &query->first_tlv, BNX2X_VF_TLV_CLOSE,
+			      sizeof(*query));
 
 		query->vf_id = vf_id;
 
@@ -412,6 +441,8 @@ bnx2x_vf_unload(struct bnx2x_softc *sc)
 		if (reply->status != BNX2X_VF_STATUS_SUCCESS)
 			PMD_DRV_LOG(ERR,
 				    "Bad reply from PF for close message");
+
+		bnx2x_vf_finalize(sc, &query->first_tlv);
 	}
 }
 
@@ -476,10 +507,11 @@ bnx2x_vf_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp, int lead
 	struct vf_setup_q_tlv *query;
 	struct vf_common_reply_tlv *reply = &sc->vf2pf_mbox->resp.common_reply;
 	uint16_t flags = bnx2x_vf_q_flags(leading);
+	int rc = 0;
 
 	query = &sc->vf2pf_mbox->query[0].setup_q;
-	bnx2x_init_first_tlv(sc, &query->first_tlv, BNX2X_VF_TLV_SETUP_Q,
-			sizeof(*query));
+	bnx2x_vf_prep(sc, &query->first_tlv, BNX2X_VF_TLV_SETUP_Q,
+		      sizeof(*query));
 
 	query->vf_qid = fp->index;
 	query->param_valid = VF_RXQ_VALID | VF_TXQ_VALID;
@@ -495,10 +527,12 @@ bnx2x_vf_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp, int lead
 	if (reply->status != BNX2X_VF_STATUS_SUCCESS) {
 		PMD_DRV_LOG(ERR, "Failed to setup VF queue[%d]",
 				 fp->index);
-		return -EINVAL;
+		rc = -EINVAL;
 	}
 
-	return 0;
+	bnx2x_vf_finalize(sc, &query->first_tlv);
+
+	return rc;
 }
 
 int
@@ -506,9 +540,10 @@ bnx2x_vf_set_mac(struct bnx2x_softc *sc, int set)
 {
 	struct vf_set_q_filters_tlv *query;
 	struct vf_common_reply_tlv *reply;
+	int rc = 0;
 
 	query = &sc->vf2pf_mbox->query[0].set_q_filters;
-	bnx2x_init_first_tlv(sc, &query->first_tlv, BNX2X_VF_TLV_SET_Q_FILTERS,
+	bnx2x_vf_prep(sc, &query->first_tlv, BNX2X_VF_TLV_SET_Q_FILTERS,
 			sizeof(*query));
 
 	query->vf_qid = sc->fp->index;
@@ -543,10 +578,12 @@ bnx2x_vf_set_mac(struct bnx2x_softc *sc, int set)
 	if (BNX2X_VF_STATUS_SUCCESS != reply->status) {
 		PMD_DRV_LOG(ERR, "Bad reply from PF for SET MAC message: %d",
 				reply->status);
-		return -EINVAL;
+		rc = -EINVAL;
 	}
 
-	return 0;
+	bnx2x_vf_finalize(sc, &query->first_tlv);
+
+	return rc;
 }
 
 int
@@ -555,10 +592,11 @@ bnx2x_vf_config_rss(struct bnx2x_softc *sc,
 {
 	struct vf_rss_tlv *query;
 	struct vf_common_reply_tlv *reply = &sc->vf2pf_mbox->resp.common_reply;
+	int rc = 0;
 
 	query = &sc->vf2pf_mbox->query[0].update_rss;
 
-	bnx2x_init_first_tlv(sc, &query->first_tlv, BNX2X_VF_TLV_UPDATE_RSS,
+	bnx2x_vf_prep(sc, &query->first_tlv, BNX2X_VF_TLV_UPDATE_RSS,
 			sizeof(*query));
 
 	/* add list termination tlv */
@@ -578,10 +616,12 @@ bnx2x_vf_config_rss(struct bnx2x_softc *sc,
 	bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
 	if (reply->status != BNX2X_VF_STATUS_SUCCESS) {
 		PMD_DRV_LOG(ERR, "Failed to configure RSS");
-		return -EINVAL;
+		rc = -EINVAL;
 	}
 
-	return 0;
+	bnx2x_vf_finalize(sc, &query->first_tlv);
+
+	return rc;
 }
 
 int
@@ -589,9 +629,10 @@ bnx2x_vf_set_rx_mode(struct bnx2x_softc *sc)
 {
 	struct vf_set_q_filters_tlv *query;
 	struct vf_common_reply_tlv *reply = &sc->vf2pf_mbox->resp.common_reply;
+	int rc = 0;
 
 	query = &sc->vf2pf_mbox->query[0].set_q_filters;
-	bnx2x_init_first_tlv(sc, &query->first_tlv, BNX2X_VF_TLV_SET_Q_FILTERS,
+	bnx2x_vf_prep(sc, &query->first_tlv, BNX2X_VF_TLV_SET_Q_FILTERS,
 			sizeof(*query));
 
 	query->vf_qid = 0;
@@ -618,7 +659,8 @@ bnx2x_vf_set_rx_mode(struct bnx2x_softc *sc)
 		break;
 	default:
 		PMD_DRV_LOG(ERR, "BAD rx mode (%d)", sc->rx_mode);
-		return -EINVAL;
+		rc = -EINVAL;
+		goto out;
 	}
 
 	bnx2x_add_tlv(sc, query, query->first_tlv.tl.length,
@@ -628,8 +670,11 @@ bnx2x_vf_set_rx_mode(struct bnx2x_softc *sc)
 	bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
 	if (reply->status != BNX2X_VF_STATUS_SUCCESS) {
 		PMD_DRV_LOG(ERR, "Failed to set RX mode");
-		return -EINVAL;
+		rc = -EINVAL;
 	}
 
-	return 0;
+out:
+	bnx2x_vf_finalize(sc, &query->first_tlv);
+
+	return rc;
 }
-- 
2.7.4

[dpdk-dev] [PATCH v3 08/10] net/bnx2x: check return codes during VF mailbox operation

[Chas Williams]

Refactor bnx2x_do_req4pf() to be easier to read and return errors when
the transaction fails -- Previously, it could succeed when the control
channel was down.

Fixes: 540a211084a7 ("bnx2x: driver core")

Signed-off-by: Chas Williams <3chas3@gmail.com>
---
 drivers/net/bnx2x/bnx2x_vfpf.c | 110 +++++++++++++++++++++++------------------
 1 file changed, 61 insertions(+), 49 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x_vfpf.c b/drivers/net/bnx2x/bnx2x_vfpf.c
index 340422d..0a8a6ed 100644
--- a/drivers/net/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/bnx2x/bnx2x_vfpf.c
@@ -118,39 +118,36 @@ bnx2x_do_req4pf(struct bnx2x_softc *sc, phys_addr_t phys_addr)
 	uint8_t *status = &sc->vf2pf_mbox->resp.common_reply.status;
 	uint8_t i;
 
-	if (!*status) {
-		bnx2x_check_bull(sc);
-		if (sc->old_bulletin.valid_bitmap & (1 << CHANNEL_DOWN)) {
-			PMD_DRV_LOG(ERR, "channel is down. Aborting message sending");
-			*status = BNX2X_VF_STATUS_SUCCESS;
-			return 0;
-		}
+	if (*status) {
+		PMD_DRV_LOG(ERR, "status should be zero before message"
+				 " to pf was sent");
+		return -EINVAL;
+	}
 
-		REG_WR(sc, BNX2X_VF_CMD_ADDR_LO, U64_LO(phys_addr));
-		REG_WR(sc, BNX2X_VF_CMD_ADDR_HI, U64_HI(phys_addr));
+	bnx2x_check_bull(sc);
+	if (sc->old_bulletin.valid_bitmap & (1 << CHANNEL_DOWN)) {
+		PMD_DRV_LOG(ERR, "channel is down. Aborting message sending");
+		return -EINVAL;
+	}
 
-		/* memory barrier to ensure that FW can read phys_addr */
-		wmb();
+	REG_WR(sc, BNX2X_VF_CMD_ADDR_LO, U64_LO(phys_addr));
+	REG_WR(sc, BNX2X_VF_CMD_ADDR_HI, U64_HI(phys_addr));
 
-		REG_WR8(sc, BNX2X_VF_CMD_TRIGGER, 1);
+	/* memory barrier to ensure that FW can read phys_addr */
+	wmb();
 
-		/* Do several attempts until PF completes
-		 * "." is used to show progress
-		 */
-		for (i = 0; i < BNX2X_VF_CHANNEL_TRIES; i++) {
-			DELAY_MS(BNX2X_VF_CHANNEL_DELAY);
-			if (*status)
-				break;
-		}
+	REG_WR8(sc, BNX2X_VF_CMD_TRIGGER, 1);
 
-		if (!*status) {
-			PMD_DRV_LOG(ERR, "Response from PF timed out");
-			return -EAGAIN;
-		}
-	} else {
-		PMD_DRV_LOG(ERR, "status should be zero before message"
-				"to pf was sent");
-		return -EINVAL;
+	/* Do several attempts until PF completes */
+	for (i = 0; i < BNX2X_VF_CHANNEL_TRIES; i++) {
+		DELAY_MS(BNX2X_VF_CHANNEL_DELAY);
+		if (*status)
+			break;
+	}
+
+	if (!*status) {
+		PMD_DRV_LOG(ERR, "Response from PF timed out");
+		return -EAGAIN;
 	}
 
 	PMD_DRV_LOG(DEBUG, "Response from PF was received");
@@ -338,6 +335,7 @@ bnx2x_vf_close(struct bnx2x_softc *sc)
 	struct vf_release_tlv *query;
 	struct vf_common_reply_tlv *reply = &sc->vf2pf_mbox->resp.common_reply;
 	int vf_id = bnx2x_read_vf_id(sc);
+	int rc;
 
 	if (vf_id >= 0) {
 		query = &sc->vf2pf_mbox->query[0].release;
@@ -349,8 +347,8 @@ bnx2x_vf_close(struct bnx2x_softc *sc)
 			      BNX2X_VF_TLV_LIST_END,
 			      sizeof(struct channel_list_end_tlv));
 
-		bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
-		if (reply->status != BNX2X_VF_STATUS_SUCCESS)
+		rc = bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+		if (rc || reply->status != BNX2X_VF_STATUS_SUCCESS)
 			PMD_DRV_LOG(ERR, "Failed to release VF");
 
 		bnx2x_vf_finalize(sc, &query->first_tlv);
@@ -363,7 +361,7 @@ bnx2x_vf_init(struct bnx2x_softc *sc)
 {
 	struct vf_init_tlv *query;
 	struct vf_common_reply_tlv *reply = &sc->vf2pf_mbox->resp.common_reply;
-	int i, rc = 0;
+	int i, rc;
 
 	query = &sc->vf2pf_mbox->query[0].init;
 	bnx2x_vf_prep(sc, &query->first_tlv, BNX2X_VF_TLV_INIT,
@@ -381,7 +379,9 @@ bnx2x_vf_init(struct bnx2x_softc *sc)
 		      BNX2X_VF_TLV_LIST_END,
 		      sizeof(struct channel_list_end_tlv));
 
-	bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+	rc = bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+	if (rc)
+		goto out;
 	if (reply->status != BNX2X_VF_STATUS_SUCCESS) {
 		PMD_DRV_LOG(ERR, "Failed to init VF");
 		rc = -EINVAL;
@@ -400,7 +400,7 @@ bnx2x_vf_unload(struct bnx2x_softc *sc)
 	struct vf_close_tlv *query;
 	struct vf_common_reply_tlv *reply = &sc->vf2pf_mbox->resp.common_reply;
 	struct vf_q_op_tlv *query_op;
-	int i, vf_id;
+	int i, vf_id, rc;
 
 	vf_id = bnx2x_read_vf_id(sc);
 	if (vf_id > 0) {
@@ -417,8 +417,8 @@ bnx2x_vf_unload(struct bnx2x_softc *sc)
 				      BNX2X_VF_TLV_LIST_END,
 				      sizeof(struct channel_list_end_tlv));
 
-			bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
-			if (reply->status != BNX2X_VF_STATUS_SUCCESS)
+			rc = bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+			if (rc || reply->status != BNX2X_VF_STATUS_SUCCESS)
 				PMD_DRV_LOG(ERR,
 					    "Bad reply for vf_q %d teardown", i);
 
@@ -437,8 +437,8 @@ bnx2x_vf_unload(struct bnx2x_softc *sc)
 			      BNX2X_VF_TLV_LIST_END,
 			      sizeof(struct channel_list_end_tlv));
 
-		bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
-		if (reply->status != BNX2X_VF_STATUS_SUCCESS)
+		rc = bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+		if (rc || reply->status != BNX2X_VF_STATUS_SUCCESS)
 			PMD_DRV_LOG(ERR,
 				    "Bad reply from PF for close message");
 
@@ -507,7 +507,7 @@ bnx2x_vf_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp, int lead
 	struct vf_setup_q_tlv *query;
 	struct vf_common_reply_tlv *reply = &sc->vf2pf_mbox->resp.common_reply;
 	uint16_t flags = bnx2x_vf_q_flags(leading);
-	int rc = 0;
+	int rc;
 
 	query = &sc->vf2pf_mbox->query[0].setup_q;
 	bnx2x_vf_prep(sc, &query->first_tlv, BNX2X_VF_TLV_SETUP_Q,
@@ -523,13 +523,15 @@ bnx2x_vf_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp, int lead
 		      BNX2X_VF_TLV_LIST_END,
 		      sizeof(struct channel_list_end_tlv));
 
-	bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+	rc = bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+	if (rc)
+		goto out;
 	if (reply->status != BNX2X_VF_STATUS_SUCCESS) {
 		PMD_DRV_LOG(ERR, "Failed to setup VF queue[%d]",
 				 fp->index);
 		rc = -EINVAL;
 	}
-
+out:
 	bnx2x_vf_finalize(sc, &query->first_tlv);
 
 	return rc;
@@ -540,7 +542,7 @@ bnx2x_vf_set_mac(struct bnx2x_softc *sc, int set)
 {
 	struct vf_set_q_filters_tlv *query;
 	struct vf_common_reply_tlv *reply;
-	int rc = 0;
+	int rc;
 
 	query = &sc->vf2pf_mbox->query[0].set_q_filters;
 	bnx2x_vf_prep(sc, &query->first_tlv, BNX2X_VF_TLV_SET_Q_FILTERS,
@@ -561,7 +563,9 @@ bnx2x_vf_set_mac(struct bnx2x_softc *sc, int set)
 		      BNX2X_VF_TLV_LIST_END,
 		      sizeof(struct channel_list_end_tlv));
 
-	bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+	rc = bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+	if (rc)
+		goto out;
 	reply = &sc->vf2pf_mbox->resp.common_reply;
 
 	while (BNX2X_VF_STATUS_FAILURE == reply->status &&
@@ -572,7 +576,9 @@ bnx2x_vf_set_mac(struct bnx2x_softc *sc, int set)
 		rte_memcpy(query->filters[0].mac, sc->pf2vf_bulletin->mac,
 				ETH_ALEN);
 
-		bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+		rc = bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+		if (rc)
+			goto out;
 	}
 
 	if (BNX2X_VF_STATUS_SUCCESS != reply->status) {
@@ -580,7 +586,7 @@ bnx2x_vf_set_mac(struct bnx2x_softc *sc, int set)
 				reply->status);
 		rc = -EINVAL;
 	}
-
+out:
 	bnx2x_vf_finalize(sc, &query->first_tlv);
 
 	return rc;
@@ -592,7 +598,7 @@ bnx2x_vf_config_rss(struct bnx2x_softc *sc,
 {
 	struct vf_rss_tlv *query;
 	struct vf_common_reply_tlv *reply = &sc->vf2pf_mbox->resp.common_reply;
-	int rc = 0;
+	int rc;
 
 	query = &sc->vf2pf_mbox->query[0].update_rss;
 
@@ -613,12 +619,15 @@ bnx2x_vf_config_rss(struct bnx2x_softc *sc,
 	query->rss_result_mask = params->rss_result_mask;
 	query->rss_flags = params->rss_flags;
 
-	bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+	rc = bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+	if (rc)
+		goto out;
+
 	if (reply->status != BNX2X_VF_STATUS_SUCCESS) {
 		PMD_DRV_LOG(ERR, "Failed to configure RSS");
 		rc = -EINVAL;
 	}
-
+out:
 	bnx2x_vf_finalize(sc, &query->first_tlv);
 
 	return rc;
@@ -629,7 +638,7 @@ bnx2x_vf_set_rx_mode(struct bnx2x_softc *sc)
 {
 	struct vf_set_q_filters_tlv *query;
 	struct vf_common_reply_tlv *reply = &sc->vf2pf_mbox->resp.common_reply;
-	int rc = 0;
+	int rc;
 
 	query = &sc->vf2pf_mbox->query[0].set_q_filters;
 	bnx2x_vf_prep(sc, &query->first_tlv, BNX2X_VF_TLV_SET_Q_FILTERS,
@@ -667,7 +676,10 @@ bnx2x_vf_set_rx_mode(struct bnx2x_softc *sc)
 		      BNX2X_VF_TLV_LIST_END,
 		      sizeof(struct channel_list_end_tlv));
 
-	bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+	rc = bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+	if (rc)
+		goto out;
+
 	if (reply->status != BNX2X_VF_STATUS_SUCCESS) {
 		PMD_DRV_LOG(ERR, "Failed to set RX mode");
 		rc = -EINVAL;
-- 
2.7.4

[dpdk-dev] [PATCH v3 09/10] net/bnx2x: don't return structs

[Chas Williams]

bnx2x_loop_obtain_resources() returns a struct.  This routine either
succeeds or fails -- We don't need a struct for that.

Fixes: 540a211084a7 ("bnx2x: driver core")

Signed-off-by: Chas Williams <3chas3@gmail.com>
---
 drivers/net/bnx2x/bnx2x_vfpf.c | 51 ++++++++++++++++--------------------------
 1 file changed, 19 insertions(+), 32 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x_vfpf.c b/drivers/net/bnx2x/bnx2x_vfpf.c
index 0a8a6ed..c47beb0 100644
--- a/drivers/net/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/bnx2x/bnx2x_vfpf.c
@@ -186,31 +186,23 @@ static inline int bnx2x_read_vf_id(struct bnx2x_softc *sc)
 #define BNX2X_VF_OBTAIN_MAC_FILTERS 1
 #define BNX2X_VF_OBTAIN_MC_FILTERS 10
 
-struct bnx2x_obtain_status {
-	int success;
-	int err_code;
-};
-
 static
-struct bnx2x_obtain_status bnx2x_loop_obtain_resources(struct bnx2x_softc *sc)
+int bnx2x_loop_obtain_resources(struct bnx2x_softc *sc)
 {
-	int tries = 0;
 	struct vf_acquire_resp_tlv *resp = &sc->vf2pf_mbox->resp.acquire_resp,
-								 *sc_resp = &sc->acquire_resp;
-	struct vf_resource_query    *res_query;
-	struct vf_resc            *resc;
-	struct bnx2x_obtain_status     status;
+				   *sc_resp = &sc->acquire_resp;
+	struct vf_resource_query   *res_query;
+	struct vf_resc		   *resc;
 	int res_obtained = false;
+	int tries = 0;
+	int rc;
 
 	do {
 		PMD_DRV_LOG(DEBUG, "trying to get resources");
 
-		if (bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr)) {
-			/* timeout */
-			status.success = 0;
-			status.err_code = -EAGAIN;
-			return status;
-		}
+		rc = bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
+		if (rc)
+			return rc;
 
 		memcpy(sc_resp, resp, sizeof(sc->acquire_resp));
 
@@ -221,12 +213,12 @@ struct bnx2x_obtain_status bnx2x_loop_obtain_resources(struct bnx2x_softc *sc)
 			PMD_DRV_LOG(DEBUG, "resources obtained successfully");
 			res_obtained = true;
 		} else if (sc_resp->status == BNX2X_VF_STATUS_NO_RESOURCES &&
-			tries < BNX2X_VF_OBTAIN_MAX_TRIES) {
+			   tries < BNX2X_VF_OBTAIN_MAX_TRIES) {
 			PMD_DRV_LOG(DEBUG,
 			   "PF cannot allocate requested amount of resources");
 
 			res_query = &sc->vf2pf_mbox->query[0].acquire.res_query;
-			resc     = &sc_resp->resc;
+			resc      = &sc_resp->resc;
 
 			/* PF refused our request. Try to decrease request params */
 			res_query->num_txqs         = min(res_query->num_txqs, resc->num_txqs);
@@ -238,24 +230,21 @@ struct bnx2x_obtain_status bnx2x_loop_obtain_resources(struct bnx2x_softc *sc)
 
 			memset(&sc->vf2pf_mbox->resp, 0, sizeof(union resp_tlvs));
 		} else {
-			PMD_DRV_LOG(ERR, "Resources cannot be obtained. Status of handling: %d. Aborting",
-					sc_resp->status);
-			status.success = 0;
-			status.err_code = -EAGAIN;
-			return status;
+			PMD_DRV_LOG(ERR, "Failed to get the requested "
+					 "amount of resources: %d.",
+					 sc_resp->status);
+			return -EINVAL;
 		}
 	} while (!res_obtained);
 
-	status.success = 1;
-	return status;
+	return 0;
 }
 
 int bnx2x_vf_get_resources(struct bnx2x_softc *sc, uint8_t tx_count, uint8_t rx_count)
 {
 	struct vf_acquire_tlv *acq = &sc->vf2pf_mbox->query[0].acquire;
 	int vf_id;
-	struct bnx2x_obtain_status obtain_status;
-	int rc = 0;
+	int rc;
 
 	bnx2x_vf_close(sc);
 	bnx2x_vf_prep(sc, &acq->first_tlv, BNX2X_VF_TLV_ACQUIRE, sizeof(*acq));
@@ -287,11 +276,9 @@ int bnx2x_vf_get_resources(struct bnx2x_softc *sc, uint8_t tx_count, uint8_t rx_
 		      sizeof(struct channel_list_end_tlv));
 
 	/* requesting the resources in loop */
-	obtain_status = bnx2x_loop_obtain_resources(sc);
-	if (!obtain_status.success) {
-		rc = obtain_status.err_code;
+	rc = bnx2x_loop_obtain_resources(sc);
+	if (rc)
 		goto out;
-	}
 
 	struct vf_acquire_resp_tlv sc_resp = sc->acquire_resp;
 
-- 
2.7.4

[dpdk-dev] [PATCH v3 10/10] net/bnx2x: merge debug register operations into headers

[Chas Williams]

The register read/writes should just be static inline instead of
alternately defined as routines or macros depending on the status of
debugging.

Fix bnx2x_reg_read32() returning 0 during debug unaligned reads.

Fixes: b5bf7719221d ("bnx2x: driver support routines")

Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Harish Patil <harish.patil@qlogic.com>
---
 drivers/net/bnx2x/Makefile |  1 -
 drivers/net/bnx2x/bnx2x.h  | 99 +++++++++++++++++++++++++++++++++++++---------
 drivers/net/bnx2x/debug.c  | 96 --------------------------------------------
 3 files changed, 80 insertions(+), 116 deletions(-)
 delete mode 100644 drivers/net/bnx2x/debug.c

diff --git a/drivers/net/bnx2x/Makefile b/drivers/net/bnx2x/Makefile
index ab69680..e971fb6 100644
--- a/drivers/net/bnx2x/Makefile
+++ b/drivers/net/bnx2x/Makefile
@@ -28,7 +28,6 @@ SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += bnx2x_ethdev.c
 SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += ecore_sp.c
 SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += elink.c
 SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += bnx2x_vfpf.c
-SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC) += debug.c
 
 # this lib depends upon:
 DEPDIRS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += lib/librte_eal lib/librte_ether
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index e4979ac..5cefea4 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -1414,34 +1414,95 @@ struct bnx2x_func_init_params {
 #define BAR1 2
 #define BAR2 4
 
+static inline void
+bnx2x_reg_write8(struct bnx2x_softc *sc, size_t offset, uint8_t val)
+{
+	PMD_DEBUG_PERIODIC_LOG(DEBUG, "offset=0x%08lx val=0x%02x",
+			       (unsigned long)offset, val);
+	*((volatile uint8_t*)
+	  ((uintptr_t)sc->bar[BAR0].base_addr + offset)) = val;
+}
+
+static inline void
+bnx2x_reg_write16(struct bnx2x_softc *sc, size_t offset, uint16_t val)
+{
+#ifdef RTE_LIBRTE_BNX2X_DEBUG_PERIODIC
+	if ((offset % 2) != 0)
+		PMD_DRV_LOG(NOTICE, "Unaligned 16-bit write to 0x%08lx",
+			    (unsigned long)offset);
+#endif
+	PMD_DEBUG_PERIODIC_LOG(DEBUG, "offset=0x%08lx val=0x%04x",
+			       (unsigned long)offset, val);
+	*((volatile uint16_t*)
+	  ((uintptr_t)sc->bar[BAR0].base_addr + offset)) = val;
+}
+
+static inline void
+bnx2x_reg_write32(struct bnx2x_softc *sc, size_t offset, uint32_t val)
+{
 #ifdef RTE_LIBRTE_BNX2X_DEBUG_PERIODIC
-uint8_t bnx2x_reg_read8(struct bnx2x_softc *sc, size_t offset);
-uint16_t bnx2x_reg_read16(struct bnx2x_softc *sc, size_t offset);
-uint32_t bnx2x_reg_read32(struct bnx2x_softc *sc, size_t offset);
+	if ((offset % 4) != 0)
+		PMD_DRV_LOG(NOTICE, "Unaligned 32-bit write to 0x%08lx",
+			    (unsigned long)offset);
+#endif
 
-void bnx2x_reg_write8(struct bnx2x_softc *sc, size_t offset, uint8_t val);
-void bnx2x_reg_write16(struct bnx2x_softc *sc, size_t offset, uint16_t val);
-void bnx2x_reg_write32(struct bnx2x_softc *sc, size_t offset, uint32_t val);
-#else
-#define bnx2x_reg_write8(sc, offset, val)\
-	*((volatile uint8_t*)((uintptr_t)sc->bar[BAR0].base_addr + offset)) = val
+	PMD_DEBUG_PERIODIC_LOG(DEBUG, "offset=0x%08lx val=0x%08x",
+			       (unsigned long)offset, val);
+	*((volatile uint32_t*)
+	  ((uintptr_t)sc->bar[BAR0].base_addr + offset)) = val;
+}
+
+static inline uint8_t
+bnx2x_reg_read8(struct bnx2x_softc *sc, size_t offset)
+{
+	uint8_t val;
+
+	val = (uint8_t)(*((volatile uint8_t*)
+			  ((uintptr_t)sc->bar[BAR0].base_addr + offset)));
+	PMD_DEBUG_PERIODIC_LOG(DEBUG, "offset=0x%08lx val=0x%02x",
+			       (unsigned long)offset, val);
+
+	return val;
+}
+
+static inline uint16_t
+bnx2x_reg_read16(struct bnx2x_softc *sc, size_t offset)
+{
+	uint16_t val;
 
-#define bnx2x_reg_write16(sc, offset, val)\
-	*((volatile uint16_t*)((uintptr_t)sc->bar[BAR0].base_addr + offset)) = val
+#ifdef RTE_LIBRTE_BNX2X_DEBUG_PERIODIC
+	if ((offset % 2) != 0)
+		PMD_DRV_LOG(NOTICE, "Unaligned 16-bit read from 0x%08lx",
+			    (unsigned long)offset);
+#endif
 
-#define bnx2x_reg_write32(sc, offset, val)\
-	*((volatile uint32_t*)((uintptr_t)sc->bar[BAR0].base_addr + offset)) = val
+	val = (uint16_t)(*((volatile uint16_t*)
+			   ((uintptr_t)sc->bar[BAR0].base_addr + offset)));
+	PMD_DEBUG_PERIODIC_LOG(DEBUG, "offset=0x%08lx val=0x%08x",
+			       (unsigned long)offset, val);
 
-#define bnx2x_reg_read8(sc, offset)\
-	(*((volatile uint8_t*)((uintptr_t)sc->bar[BAR0].base_addr + offset)))
+	return val;
+}
 
-#define bnx2x_reg_read16(sc, offset)\
-	(*((volatile uint16_t*)((uintptr_t)sc->bar[BAR0].base_addr + offset)))
+static inline uint32_t
+bnx2x_reg_read32(struct bnx2x_softc *sc, size_t offset)
+{
+	uint32_t val;
 
-#define bnx2x_reg_read32(sc, offset)\
-	(*((volatile uint32_t*)((uintptr_t)sc->bar[BAR0].base_addr + offset)))
+#ifdef RTE_LIBRTE_BNX2X_DEBUG_PERIODIC
+	if ((offset % 4) != 0)
+		PMD_DRV_LOG(NOTICE, "Unaligned 32-bit read from 0x%08lx",
+			    (unsigned long)offset);
 #endif
 
+	val = (uint32_t)(*((volatile uint32_t*)
+			   ((uintptr_t)sc->bar[BAR0].base_addr + offset)));
+	PMD_DEBUG_PERIODIC_LOG(DEBUG, "offset=0x%08lx val=0x%08x",
+			       (unsigned long)offset, val);
+
+	return val;
+}
+
 #define REG_ADDR(sc, offset) (((uint64_t)sc->bar[BAR0].base_addr) + (offset))
 
 #define REG_RD8(sc, offset)  bnx2x_reg_read8(sc, (offset))
diff --git a/drivers/net/bnx2x/debug.c b/drivers/net/bnx2x/debug.c
deleted file mode 100644
index cc50845..0000000
--- a/drivers/net/bnx2x/debug.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*-
- * Copyright (c) 2007-2013 QLogic Corporation. All rights reserved.
- *
- * Eric Davis        <edavis@broadcom.com>
- * David Christensen <davidch@broadcom.com>
- * Gary Zambrano     <zambrano@broadcom.com>
- *
- * Copyright (c) 2013-2015 Brocade Communications Systems, Inc.
- * Copyright (c) 2015 QLogic Corporation.
- * All rights reserved.
- * www.qlogic.com
- *
- * See LICENSE.bnx2x_pmd for copyright and licensing details.
- */
-
-#include "bnx2x.h"
-
-
-/*
- * Debug versions of the 8/16/32 bit OS register read/write functions to
- * capture/display values read/written from/to the controller.
- */
-void
-bnx2x_reg_write8(struct bnx2x_softc *sc, size_t offset, uint8_t val)
-{
-	PMD_DEBUG_PERIODIC_LOG(DEBUG, "offset=0x%08lx val=0x%02x", (unsigned long)offset, val);
-	*((volatile uint8_t*)((uintptr_t)sc->bar[BAR0].base_addr + offset)) = val;
-}
-
-void
-bnx2x_reg_write16(struct bnx2x_softc *sc, size_t offset, uint16_t val)
-{
-	if ((offset % 2) != 0) {
-		PMD_DRV_LOG(NOTICE, "Unaligned 16-bit write to 0x%08lx",
-			    (unsigned long)offset);
-	}
-
-	PMD_DEBUG_PERIODIC_LOG(DEBUG, "offset=0x%08lx val=0x%04x", (unsigned long)offset, val);
-	*((volatile uint16_t*)((uintptr_t)sc->bar[BAR0].base_addr + offset)) = val;
-}
-
-void
-bnx2x_reg_write32(struct bnx2x_softc *sc, size_t offset, uint32_t val)
-{
-	if ((offset % 4) != 0) {
-		PMD_DRV_LOG(NOTICE, "Unaligned 32-bit write to 0x%08lx",
-			    (unsigned long)offset);
-	}
-
-	PMD_DEBUG_PERIODIC_LOG(DEBUG, "offset=0x%08lx val=0x%08x", (unsigned long)offset, val);
-	*((volatile uint32_t*)((uintptr_t)sc->bar[BAR0].base_addr + offset)) = val;
-}
-
-uint8_t
-bnx2x_reg_read8(struct bnx2x_softc *sc, size_t offset)
-{
-	uint8_t val;
-
-	val = (uint8_t)(*((volatile uint8_t*)((uintptr_t)sc->bar[BAR0].base_addr + offset)));
-	PMD_DEBUG_PERIODIC_LOG(DEBUG, "offset=0x%08lx val=0x%02x", (unsigned long)offset, val);
-
-	return val;
-}
-
-uint16_t
-bnx2x_reg_read16(struct bnx2x_softc *sc, size_t offset)
-{
-	uint16_t val;
-
-	if ((offset % 2) != 0) {
-		PMD_DRV_LOG(NOTICE, "Unaligned 16-bit read from 0x%08lx",
-			    (unsigned long)offset);
-	}
-
-	val = (uint16_t)(*((volatile uint16_t*)((uintptr_t)sc->bar[BAR0].base_addr + offset)));
-	PMD_DEBUG_PERIODIC_LOG(DEBUG, "offset=0x%08lx val=0x%08x", (unsigned long)offset, val);
-
-	return val;
-}
-
-uint32_t
-bnx2x_reg_read32(struct bnx2x_softc *sc, size_t offset)
-{
-	uint32_t val;
-
-	if ((offset % 4) != 0) {
-		PMD_DRV_LOG(NOTICE, "Unaligned 32-bit read from 0x%08lx",
-			    (unsigned long)offset);
-		return 0;
-	}
-
-	val = (uint32_t)(*((volatile uint32_t*)((uintptr_t)sc->bar[BAR0].base_addr + offset)));
-	PMD_DEBUG_PERIODIC_LOG(DEBUG, "offset=0x%08lx val=0x%08x", (unsigned long)offset, val);
-
-	return val;
-}
-- 
2.7.4

Re: [dpdk-dev] [PATCH v3 01/10] net/bnx2x: set cache line based on build configuration

[Bruce Richardson]

On Tue, Oct 11, 2016 at 07:04:52PM -0400, Chas Williams wrote:
> Correctly hint the cache line size.  Remove unused macros associated
> with the cache line size.
> 
> Fixes: 540a211084a7 ("bnx2x: driver core")
> 
> Signed-off-by: Chas Williams <3chas3@gmail.com>
> Acked-by: Harish Patil <harish.patil@qlogic.com>

Series applied to dpdk-next-net/rel_16_11

/Bruce