From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga07.intel.com (mga07.intel.com [134.134.136.100]) by dpdk.org (Postfix) with ESMTP id 40EEB29D6 for ; Thu, 24 Nov 2016 02:32:15 +0100 (CET) Received: from fmsmga006.fm.intel.com ([10.253.24.20]) by orsmga105.jf.intel.com with ESMTP; 23 Nov 2016 17:32:14 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.31,689,1473145200"; d="scan'208";a="35041921" Received: from dpdk26.sh.intel.com ([10.239.128.228]) by fmsmga006.fm.intel.com with ESMTP; 23 Nov 2016 17:32:14 -0800 From: Wenzhuo Lu To: dev@dpdk.org Cc: Wenzhuo Lu Date: Wed, 23 Nov 2016 12:22:54 -0500 Message-Id: <1479921780-9813-11-git-send-email-wenzhuo.lu@intel.com> X-Mailer: git-send-email 1.9.3 In-Reply-To: <1479921780-9813-1-git-send-email-wenzhuo.lu@intel.com> References: <1479921780-9813-1-git-send-email-wenzhuo.lu@intel.com> Subject: [dpdk-dev] [PATCH 10/16] e1000/base: workaround for ULP entry flow X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: patches and discussions about DPDK List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2016 01:32:15 -0000 For i217 revision 6, when entering Ultra Low Power (ULP) we need to enable Low Power Link Up (LPLU) and disable Gig speed to make it work. Signed-off-by: Wenzhuo Lu --- drivers/net/e1000/base/e1000_ich8lan.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/net/e1000/base/e1000_ich8lan.c b/drivers/net/e1000/base/e1000_ich8lan.c index 0ac982c..0837a40 100644 --- a/drivers/net/e1000/base/e1000_ich8lan.c +++ b/drivers/net/e1000/base/e1000_ich8lan.c @@ -1068,6 +1068,7 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) u32 mac_reg; s32 ret_val = E1000_SUCCESS; u16 phy_reg; + u16 oem_reg = 0; if ((hw->mac.type < e1000_pch_lpt) || (hw->device_id == E1000_DEV_ID_PCH_LPT_I217_LM) || @@ -1128,6 +1129,25 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; E1000_WRITE_REG(hw, E1000_CTRL_EXT, mac_reg); + /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable + * LPLU and disable Gig speed when entering ULP + */ + if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6)) { + ret_val = e1000_read_phy_reg_hv_locked(hw, HV_OEM_BITS, + &oem_reg); + if (ret_val) + goto release; + + phy_reg = oem_reg; + phy_reg |= HV_OEM_BITS_LPLU | HV_OEM_BITS_GBE_DIS; + + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS, + phy_reg); + + if (ret_val) + goto release; + } + skip_smbus: if (!to_sx) { /* Change the 'Link Status Change' interrupt to trigger @@ -1184,6 +1204,14 @@ skip_smbus: E1000_WRITE_REG(hw, E1000_TCTL, mac_reg); } + if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6) && + to_sx && (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) { + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS, + oem_reg); + if (ret_val) + goto release; + } + release: hw->phy.ops.release(hw); out: @@ -1401,6 +1429,8 @@ out: } #endif /* ULP_SUPPORT */ + + /** * e1000_check_for_copper_link_ich8lan - Check for link (Copper) * @hw: pointer to the HW structure -- 1.9.3