From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from proxy.6wind.com (host.76.145.23.62.rev.coltfrance.com [62.23.145.76]) by dpdk.org (Postfix) with ESMTP id F3DA739EA for ; Thu, 16 Feb 2017 17:32:23 +0100 (CET) Received: from glumotte.dev.6wind.com (unknown [10.16.0.195]) by proxy.6wind.com (Postfix) with ESMTP id 4F39E258BF; Thu, 16 Feb 2017 17:32:19 +0100 (CET) From: Olivier Matz To: dev@dpdk.org, helin.zhang@intel.com, konstantin.ananyev@intel.com, wei.dai@intel.com Cc: laurent.hardy@6wind.com Date: Thu, 16 Feb 2017 17:32:01 +0100 Message-Id: <1487262721-22370-1-git-send-email-olivier.matz@6wind.com> X-Mailer: git-send-email 2.8.1 In-Reply-To: <1479403792-11928-1-git-send-email-laurent.hardy@6wind.com> References: <1479403792-11928-1-git-send-email-laurent.hardy@6wind.com> Subject: [dpdk-dev] [PATCH v2] net/ixgbe: ensure link status is updated X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 16 Feb 2017 16:32:24 -0000 From: Laurent Hardy In case of fiber and link speed set to 1Gb at peer side (with autoneg or with defined speed), link status could be not properly updated at time cable is plugged-in. Indeed if cable was not plugged when device has been configured and started then link status will not be updated properly with new speed as no link setup will be triggered. To avoid this issue, IXGBE_FLAG_NEED_LINK_CONFIG is set to try a link setup each time link_update() is triggered and current link status is down. When cable is plugged-in, link setup will be performed via ixgbe_setup_link(). Signed-off-by: Laurent Hardy --- v1 -> v2: - rebase on top of head (change flag to 1<<4) - fix regression with copper links: only update link for fiber links drivers/net/ixgbe/ixgbe_ethdev.c | 21 +++++++++++++++++++++ drivers/net/ixgbe/ixgbe_ethdev.h | 1 + 2 files changed, 22 insertions(+) diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c index 0b89598..1114106 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.c +++ b/drivers/net/ixgbe/ixgbe_ethdev.c @@ -2357,6 +2357,7 @@ ixgbe_dev_configure(struct rte_eth_dev *dev) /* set flag to update link status after init */ intr->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; + intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; /* * Initialize to TRUE. If any of Rx queues doesn't meet the bulk @@ -3515,8 +3516,12 @@ ixgbe_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete) struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); struct rte_eth_link link, old; ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; + struct ixgbe_interrupt *intr = + IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private); int link_up; int diag; + u32 speed = 0; + bool autoneg = false; link.link_status = ETH_LINK_DOWN; link.link_speed = 0; @@ -3526,6 +3531,20 @@ ixgbe_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete) hw->mac.get_link_status = true; + if ((intr->flags & IXGBE_FLAG_NEED_LINK_CONFIG) && + hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) { + speed = hw->phy.autoneg_advertised; + if (!speed) { + ixgbe_get_link_capabilities(hw, &speed, &autoneg); + /* setup the highest link when no autoneg */ + if (!autoneg) { + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + speed = IXGBE_LINK_SPEED_10GB_FULL; + } + } + ixgbe_setup_link(hw, speed, true); + } + /* check if it needs to wait to complete, if lsc interrupt is enabled */ if (wait_to_complete == 0 || dev->data->dev_conf.intr_conf.lsc != 0) diag = ixgbe_check_link(hw, &link_speed, &link_up, 0); @@ -3543,10 +3562,12 @@ ixgbe_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete) if (link_up == 0) { rte_ixgbe_dev_atomic_write_link_status(dev, &link); + intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; if (link.link_status == old.link_status) return -1; return 0; } + intr->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; link.link_status = ETH_LINK_UP; link.link_duplex = ETH_LINK_FULL_DUPLEX; diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h index aabbb00..bed4379 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.h +++ b/drivers/net/ixgbe/ixgbe_ethdev.h @@ -45,6 +45,7 @@ #define IXGBE_FLAG_MAILBOX (uint32_t)(1 << 1) #define IXGBE_FLAG_PHY_INTERRUPT (uint32_t)(1 << 2) #define IXGBE_FLAG_MACSEC (uint32_t)(1 << 3) +#define IXGBE_FLAG_NEED_LINK_CONFIG (uint32_t)(1 << 4) /* * Defines that were not part of ixgbe_type.h as they are not used by the -- 2.8.1