[dpdk-dev] [PATCH v3 0/3] crypto/scheduler: add packet-base scheduling mode

[dpdk-dev] [PATCH v3 0/3] crypto/scheduler: add packet-base scheduling mode

[Fan Zhang]

Packet-size based distribution mode, which works with 2 slaves, primary
slave and secondary slave, and distribute the enqueued crypto ops to them
based on their data lengths. A crypto op will be distributed to the primary
slave if its data length equals or bigger than the designated threshold,
otherwise it will be handled by the secondary slave.

Fan Zhang (3):
  crypto/scheduler: add packet size based mode code
  crypto/scheduler: enable packet size based scheduling mode
  doc: update cryptodev scheduler PMD documentation

 doc/guides/cryptodevs/scheduler.rst                |  14 +
 drivers/crypto/scheduler/Makefile                  |   1 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.c |   7 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.h |   3 +
 .../crypto/scheduler/scheduler_pkt_size_distr.c    | 400 +++++++++++++++++++++
 5 files changed, 425 insertions(+)
 create mode 100644 drivers/crypto/scheduler/scheduler_pkt_size_distr.c

-- 
2.7.4

[dpdk-dev] [PATCH v3 1/3] crypto/scheduler: add packet size based mode code

[Fan Zhang]

This patch adds the packet size based distribution mode main source
file.

Packet-size based distribution mode is a scheduling mode works with 2
slaves, primary slave and secondary slave, and distribute the enqueued
crypto ops to them based on their data lengths. A crypto op will be
distributed to the primary slave if its data length equals or bigger
than the designated threshold, otherwise it will be handled by the
secondary slave.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
v3.
A few changes: 
* Uses 2 sched_ops array instead of one.
* Copy the failed-to-enqueue crypto ops back to the end of ops array.
* Dequeue_ordering will directly use schedule_dequeue function instead of
  excessive dequeue.

v2.
Update with new reorder method.

 .../crypto/scheduler/scheduler_pkt_size_distr.c    | 400 +++++++++++++++++++++
 1 file changed, 400 insertions(+)
 create mode 100644 drivers/crypto/scheduler/scheduler_pkt_size_distr.c

diff --git a/drivers/crypto/scheduler/scheduler_pkt_size_distr.c b/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
new file mode 100644
index 0000000..ffc6ff9
--- /dev/null
+++ b/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
@@ -0,0 +1,400 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_cryptodev.h>
+#include <rte_malloc.h>
+
+#include "rte_cryptodev_scheduler_operations.h"
+#include "scheduler_pmd_private.h"
+
+#define DEF_PKT_SIZE_THRESHOLD			(0x0000ff80)
+#define SLAVE_IDX_SWITCH_MASK			(0x01)
+#define PRIMARY_SLAVE_IDX			0
+#define SECONDARY_SLAVE_IDX			1
+#define NB_PKT_SIZE_SLAVES			2
+
+/** pkt size based scheduler context */
+struct psd_scheduler_ctx {
+	uint32_t threshold;
+};
+
+/** pkt size based scheduler queue pair context */
+struct psd_scheduler_qp_ctx {
+	struct scheduler_slave primary_slave;
+	struct scheduler_slave secondary_slave;
+	uint32_t threshold;
+	uint8_t deq_idx;
+} __rte_cache_aligned;
+
+/** scheduling operation variables' wrapping */
+struct psd_schedule_op {
+	uint8_t slave_idx;
+	uint16_t pos;
+};
+
+static uint16_t
+schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
+{
+	struct psd_scheduler_qp_ctx *qp_ctx =
+			((struct scheduler_qp_ctx *)qp)->private_qp_ctx;
+	struct rte_crypto_op *sched_ops[NB_PKT_SIZE_SLAVES][nb_ops];
+	struct rte_cryptodev_sym_session *sessions[NB_PKT_SIZE_SLAVES][nb_ops];
+	struct scheduler_session *sess;
+	struct psd_schedule_op enq_ops[NB_PKT_SIZE_SLAVES] = {
+		{PRIMARY_SLAVE_IDX, 0}, {SECONDARY_SLAVE_IDX, 0}
+	};
+	struct psd_schedule_op *p_enq_op;
+	uint16_t i, processed_ops_pri = 0, processed_ops_sec = 0;
+	uint32_t job_len, wr_back_idx = nb_ops;
+
+	if (unlikely(nb_ops == 0))
+		return 0;
+
+	for (i = 0; i < nb_ops && i < 4; i++) {
+		rte_prefetch0(ops[i]->sym);
+		rte_prefetch0(ops[i]->sym->session);
+	}
+
+	for (i = 0; (i < (nb_ops - 8)) && (nb_ops > 8); i += 4) {
+		rte_prefetch0(ops[i + 4]->sym);
+		rte_prefetch0(ops[i + 4]->sym->session);
+		rte_prefetch0(ops[i + 5]->sym);
+		rte_prefetch0(ops[i + 5]->sym->session);
+		rte_prefetch0(ops[i + 6]->sym);
+		rte_prefetch0(ops[i + 6]->sym->session);
+		rte_prefetch0(ops[i + 7]->sym);
+		rte_prefetch0(ops[i + 7]->sym->session);
+
+		sess = (struct scheduler_session *)
+				ops[i]->sym->session->_private;
+		job_len = ops[i]->sym->cipher.data.length;
+		job_len += (ops[i]->sym->auth.data.length == 0) *
+				ops[i]->sym->auth.data.length;
+		/* decide the target op based on the job length */
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i];
+		sessions[p_enq_op->slave_idx][p_enq_op->pos] =
+				ops[i]->sym->session;
+		ops[i]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		sess = (struct scheduler_session *)
+				ops[i+1]->sym->session->_private;
+		job_len = ops[i+1]->sym->cipher.data.length;
+		job_len += (ops[i+1]->sym->auth.data.length == 0) *
+				ops[i+1]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i+1];
+		sessions[p_enq_op->slave_idx][p_enq_op->pos] =
+				ops[i+1]->sym->session;
+		ops[i+1]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		sess = (struct scheduler_session *)
+				ops[i+2]->sym->session->_private;
+		job_len = ops[i+2]->sym->cipher.data.length;
+		job_len += (ops[i+2]->sym->auth.data.length == 0) *
+				ops[i+2]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i+2];
+		sessions[p_enq_op->slave_idx][p_enq_op->pos] =
+				ops[i+2]->sym->session;
+		ops[i+2]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		sess = (struct scheduler_session *)
+				ops[i+3]->sym->session->_private;
+
+		job_len = ops[i+3]->sym->cipher.data.length;
+		job_len += (ops[i+3]->sym->auth.data.length == 0) *
+				ops[i+3]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i+3];
+		sessions[p_enq_op->slave_idx][p_enq_op->pos] =
+				ops[i+3]->sym->session;
+		ops[i+3]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+	}
+
+	for (; i < nb_ops; i++) {
+		sess = (struct scheduler_session *)
+				ops[i]->sym->session->_private;
+
+		job_len = ops[i]->sym->cipher.data.length;
+		job_len += (ops[i]->sym->auth.data.length == 0) *
+				ops[i]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i];
+		sessions[p_enq_op->slave_idx][p_enq_op->pos] =
+				ops[i]->sym->session;
+		ops[i]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+	}
+
+	processed_ops_pri = rte_cryptodev_enqueue_burst(
+			qp_ctx->primary_slave.dev_id,
+			qp_ctx->primary_slave.qp_id,
+			sched_ops[PRIMARY_SLAVE_IDX],
+			enq_ops[PRIMARY_SLAVE_IDX].pos);
+	qp_ctx->primary_slave.nb_inflight_cops += processed_ops_pri;
+
+	/* for cops failed to enqueue, overwrite to ops */
+	if (processed_ops_pri < enq_ops[PRIMARY_SLAVE_IDX].pos) {
+		for (i = processed_ops_pri; i < enq_ops[PRIMARY_SLAVE_IDX].pos;
+				i++) {
+			sched_ops[PRIMARY_SLAVE_IDX][i]->sym->session =
+					sessions[PRIMARY_SLAVE_IDX][i];
+			ops[wr_back_idx - enq_ops[PRIMARY_SLAVE_IDX].pos + i] =
+					sched_ops[PRIMARY_SLAVE_IDX][i];
+		}
+
+		wr_back_idx -= (enq_ops[PRIMARY_SLAVE_IDX].pos -
+				processed_ops_pri);
+	}
+
+	processed_ops_sec = rte_cryptodev_enqueue_burst(
+			qp_ctx->secondary_slave.dev_id,
+			qp_ctx->secondary_slave.qp_id,
+			sched_ops[SECONDARY_SLAVE_IDX],
+			enq_ops[SECONDARY_SLAVE_IDX].pos);
+	qp_ctx->secondary_slave.nb_inflight_cops += processed_ops_sec;
+
+	/* for cops failed to enqueue, recover session */
+	/* for cops failed to enqueue, overwrite to ops */
+	if (processed_ops_sec < enq_ops[SECONDARY_SLAVE_IDX].pos) {
+		for (i = processed_ops_sec;
+				i < enq_ops[SECONDARY_SLAVE_IDX].pos; i++) {
+			sched_ops[PRIMARY_SLAVE_IDX][i]->sym->session =
+					sessions[SECONDARY_SLAVE_IDX][i];
+			ops[wr_back_idx - enq_ops[SECONDARY_SLAVE_IDX].pos + i] =
+					sched_ops[SECONDARY_SLAVE_IDX][i];
+		}
+	}
+
+	return processed_ops_pri + processed_ops_sec;
+}
+
+static uint16_t
+schedule_enqueue_ordering(void *qp, struct rte_crypto_op **ops,
+		uint16_t nb_ops)
+{
+	struct rte_ring *order_ring =
+			((struct scheduler_qp_ctx *)qp)->order_ring;
+	uint16_t nb_ops_to_enq = get_max_enqueue_order_count(order_ring,
+			nb_ops);
+	uint16_t nb_ops_enqd = schedule_enqueue(qp, ops,
+			nb_ops_to_enq);
+
+	scheduler_order_insert(order_ring, ops, nb_ops_enqd);
+
+	return nb_ops_enqd;
+}
+
+static uint16_t
+schedule_dequeue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
+{
+	struct psd_scheduler_qp_ctx *qp_ctx =
+			((struct scheduler_qp_ctx *)qp)->private_qp_ctx;
+	struct scheduler_slave *slaves[NB_PKT_SIZE_SLAVES] = {
+			&qp_ctx->primary_slave, &qp_ctx->secondary_slave};
+	struct scheduler_slave *slave = slaves[qp_ctx->deq_idx];
+	uint16_t nb_deq_ops_pri = 0, nb_deq_ops_sec = 0;
+
+	if (slave->nb_inflight_cops) {
+		nb_deq_ops_pri = rte_cryptodev_dequeue_burst(slave->dev_id,
+			slave->qp_id, ops, nb_ops);
+		slave->nb_inflight_cops -= nb_deq_ops_pri;
+	}
+
+	qp_ctx->deq_idx = (~qp_ctx->deq_idx) & SLAVE_IDX_SWITCH_MASK;
+
+	if (nb_deq_ops_pri == nb_ops)
+		return nb_deq_ops_pri;
+
+	slave = slaves[qp_ctx->deq_idx];
+
+	if (slave->nb_inflight_cops) {
+		nb_deq_ops_sec = rte_cryptodev_dequeue_burst(slave->dev_id,
+				slave->qp_id, &ops[nb_deq_ops_pri],
+				nb_ops - nb_deq_ops_pri);
+		slave->nb_inflight_cops -= nb_deq_ops_sec;
+	}
+
+	return nb_deq_ops_pri + nb_deq_ops_sec;
+}
+
+static uint16_t
+schedule_dequeue_ordering(void *qp, struct rte_crypto_op **ops,
+		uint16_t nb_ops)
+{
+	struct rte_ring *order_ring =
+			((struct scheduler_qp_ctx *)qp)->order_ring;
+
+	schedule_dequeue(qp, ops, nb_ops);
+
+	return scheduler_order_drain(order_ring, ops, nb_ops);
+}
+
+static int
+slave_attach(__rte_unused struct rte_cryptodev *dev,
+		__rte_unused uint8_t slave_id)
+{
+	return 0;
+}
+
+static int
+slave_detach(__rte_unused struct rte_cryptodev *dev,
+		__rte_unused uint8_t slave_id)
+{
+	return 0;
+}
+
+static int
+scheduler_start(struct rte_cryptodev *dev)
+{
+	struct scheduler_ctx *sched_ctx = dev->data->dev_private;
+	struct psd_scheduler_ctx *psd_ctx = sched_ctx->private_ctx;
+	uint16_t i;
+
+	/* for packet size based scheduler, nb_slaves have to >= 2 */
+	if (sched_ctx->nb_slaves < NB_PKT_SIZE_SLAVES) {
+		CS_LOG_ERR("not enough slaves to start");
+		return -1;
+	}
+
+	for (i = 0; i < dev->data->nb_queue_pairs; i++) {
+		struct scheduler_qp_ctx *qp_ctx = dev->data->queue_pairs[i];
+		struct psd_scheduler_qp_ctx *ps_qp_ctx =
+				qp_ctx->private_qp_ctx;
+
+		ps_qp_ctx->primary_slave.dev_id =
+				sched_ctx->slaves[PRIMARY_SLAVE_IDX].dev_id;
+		ps_qp_ctx->primary_slave.qp_id = i;
+		ps_qp_ctx->primary_slave.nb_inflight_cops = 0;
+
+		ps_qp_ctx->secondary_slave.dev_id =
+				sched_ctx->slaves[SECONDARY_SLAVE_IDX].dev_id;
+		ps_qp_ctx->secondary_slave.qp_id = i;
+		ps_qp_ctx->secondary_slave.nb_inflight_cops = 0;
+
+		ps_qp_ctx->threshold = psd_ctx->threshold;
+	}
+
+	if (sched_ctx->reordering_enabled) {
+		dev->enqueue_burst = &schedule_enqueue_ordering;
+		dev->dequeue_burst = &schedule_dequeue_ordering;
+	} else {
+		dev->enqueue_burst = &schedule_enqueue;
+		dev->dequeue_burst = &schedule_dequeue;
+	}
+
+	return 0;
+}
+
+static int
+scheduler_stop(struct rte_cryptodev *dev)
+{
+	uint16_t i;
+
+	for (i = 0; i < dev->data->nb_queue_pairs; i++) {
+		struct scheduler_qp_ctx *qp_ctx = dev->data->queue_pairs[i];
+		struct psd_scheduler_qp_ctx *ps_qp_ctx = qp_ctx->private_qp_ctx;
+
+		if (ps_qp_ctx->primary_slave.nb_inflight_cops +
+				ps_qp_ctx->secondary_slave.nb_inflight_cops) {
+			CS_LOG_ERR("Some crypto ops left in slave queue");
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static int
+scheduler_config_qp(struct rte_cryptodev *dev, uint16_t qp_id)
+{
+	struct scheduler_qp_ctx *qp_ctx = dev->data->queue_pairs[qp_id];
+	struct psd_scheduler_qp_ctx *ps_qp_ctx;
+
+	ps_qp_ctx = rte_zmalloc_socket(NULL, sizeof(*ps_qp_ctx), 0,
+			rte_socket_id());
+	if (!ps_qp_ctx) {
+		CS_LOG_ERR("failed allocate memory for private queue pair");
+		return -ENOMEM;
+	}
+
+	qp_ctx->private_qp_ctx = (void *)ps_qp_ctx;
+
+	return 0;
+}
+
+static int
+scheduler_create_private_ctx(struct rte_cryptodev *dev)
+{
+	struct scheduler_ctx *sched_ctx = dev->data->dev_private;
+	struct psd_scheduler_ctx *psd_ctx;
+
+	if (sched_ctx->private_ctx)
+		rte_free(sched_ctx->private_ctx);
+
+	psd_ctx = rte_zmalloc_socket(NULL, sizeof(struct psd_scheduler_ctx), 0,
+			rte_socket_id());
+	if (!psd_ctx) {
+		CS_LOG_ERR("failed allocate memory");
+		return -ENOMEM;
+	}
+
+	psd_ctx->threshold = DEF_PKT_SIZE_THRESHOLD;
+
+	sched_ctx->private_ctx = (void *)psd_ctx;
+
+	return 0;
+}
+
+struct rte_cryptodev_scheduler_ops scheduler_ps_ops = {
+	slave_attach,
+	slave_detach,
+	scheduler_start,
+	scheduler_stop,
+	scheduler_config_qp,
+	scheduler_create_private_ctx,
+};
+
+struct rte_cryptodev_scheduler psd_scheduler = {
+		.name = "packet-size-based-scheduler",
+		.description = "scheduler which will distribute crypto op "
+				"burst based on the packet size",
+		.mode = CDEV_SCHED_MODE_PKT_SIZE_DISTR,
+		.ops = &scheduler_ps_ops
+};
+
+struct rte_cryptodev_scheduler *pkt_size_based_distr_scheduler = &psd_scheduler;
-- 
2.7.4

[dpdk-dev] [PATCH v3 2/3] crypto/scheduler: enable packet size based scheduling mode

[Fan Zhang]

This patch enables the packet size based scheduling mode in scheduler PMD.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
 drivers/crypto/scheduler/Makefile                  | 1 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.c | 7 +++++++
 drivers/crypto/scheduler/rte_cryptodev_scheduler.h | 3 +++
 3 files changed, 11 insertions(+)

diff --git a/drivers/crypto/scheduler/Makefile b/drivers/crypto/scheduler/Makefile
index 0cce6f2..93e135f 100644
--- a/drivers/crypto/scheduler/Makefile
+++ b/drivers/crypto/scheduler/Makefile
@@ -54,6 +54,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pmd.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pmd_ops.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += rte_cryptodev_scheduler.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_roundrobin.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pkt_size_distr.c
 
 # library dependencies
 DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += lib/librte_cryptodev
diff --git a/drivers/crypto/scheduler/rte_cryptodev_scheduler.c b/drivers/crypto/scheduler/rte_cryptodev_scheduler.c
index 11e8143..eab1906 100644
--- a/drivers/crypto/scheduler/rte_cryptodev_scheduler.c
+++ b/drivers/crypto/scheduler/rte_cryptodev_scheduler.c
@@ -336,6 +336,13 @@ rte_crpytodev_scheduler_mode_set(uint8_t scheduler_id,
 			return -1;
 		}
 		break;
+	case CDEV_SCHED_MODE_PKT_SIZE_DISTR:
+		if (rte_cryptodev_scheduler_load_user_scheduler(scheduler_id,
+				pkt_size_based_distr_scheduler) < 0) {
+			CS_LOG_ERR("Failed to load scheduler");
+			return -1;
+		}
+		break;
 	default:
 		CS_LOG_ERR("Not yet supported");
 		return -ENOTSUP;
diff --git a/drivers/crypto/scheduler/rte_cryptodev_scheduler.h b/drivers/crypto/scheduler/rte_cryptodev_scheduler.h
index 7ef44e7..a1d4c14 100644
--- a/drivers/crypto/scheduler/rte_cryptodev_scheduler.h
+++ b/drivers/crypto/scheduler/rte_cryptodev_scheduler.h
@@ -47,6 +47,8 @@ enum rte_cryptodev_scheduler_mode {
 	CDEV_SCHED_MODE_NOT_SET = 0,
 	CDEV_SCHED_MODE_USERDEFINED,
 	CDEV_SCHED_MODE_ROUNDROBIN,
+	/** packet-size based distribution mode */
+	CDEV_SCHED_MODE_PKT_SIZE_DISTR,
 
 	CDEV_SCHED_MODE_COUNT /* number of modes */
 };
@@ -158,6 +160,7 @@ struct rte_cryptodev_scheduler {
 };
 
 extern struct rte_cryptodev_scheduler *roundrobin_scheduler;
+extern struct rte_cryptodev_scheduler *pkt_size_based_distr_scheduler;
 
 #ifdef __cplusplus
 }
-- 
2.7.4

[dpdk-dev] [PATCH v3 3/3] doc: update cryptodev scheduler PMD documentation

[Fan Zhang]

This patch updates packet size based scheduling mode description.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
 doc/guides/cryptodevs/scheduler.rst | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/doc/guides/cryptodevs/scheduler.rst b/doc/guides/cryptodevs/scheduler.rst
index 70fb62e..51f2a78 100644
--- a/doc/guides/cryptodevs/scheduler.rst
+++ b/doc/guides/cryptodevs/scheduler.rst
@@ -126,3 +126,17 @@ operation:
    among its slaves in a round-robin manner. This mode may help to fill
    the throughput gap between the physical core and the existing cryptodevs
    to increase the overall performance.
+
+*   **CDEV_SCHED_MODE_PKT_SIZE_DISTR:**
+
+   Packet-size based distribution mode, which works with 2 slaves, primary
+   slave and secondary slave, and distribute the enqueued crypto ops to them
+   based on their data lengths. A crypto op will be distributed to the primary
+   slave if its data length equals or bigger than the designated threshold,
+   otherwise it will be handled by the secondary slave.
+
+   A typical usecase of this mode is with QAT cryptodev as primary and a
+   software cryptodev as secondary slave. This may help the application being
+   capable of processing extra crypto workload than what the sole QAT cryptodev
+   can handle, by making use of the available CPU cycles to deal with lesser
+   crypto workloads.
-- 
2.7.4

[dpdk-dev] [PATCH v4 0/3] crypto/scheduler: add packet-base scheduling mode

[Fan Zhang]

Packet-size based distribution mode is a scheduling mode that works with
2 slaves, the primary slave and the secondary slave, and distributes the
enqueued crypto operations to them based on their data lengths. A crypto
operation will be distributed to the primary slave if its data length is
equal to or bigger than the designated threshold, otherwise it will be
handled by the secondary slave.

v4:
- Polished documentation.
- Fixed documentation grammer errors.

v3:
- Uses 2 sched_ops array instead of one.
- Copy the failed-to-enqueue crypto ops back to the end of ops array.
- Dequeue_ordering will directly use schedule_dequeue function instead of
  excessive dequeue.

v2:
- Update with new reorder method.

Fan Zhang (3):
  crypto/scheduler: add packet size based mode code
  crypto/scheduler: enable packet size based scheduling mode
  doc: update cryptodev scheduler PMD documentation

 doc/guides/cryptodevs/scheduler.rst                |  15 +
 drivers/crypto/scheduler/Makefile                  |   1 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.c |   7 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.h |   3 +
 .../crypto/scheduler/scheduler_pkt_size_distr.c    | 400 +++++++++++++++++++++
 5 files changed, 426 insertions(+)
 create mode 100644 drivers/crypto/scheduler/scheduler_pkt_size_distr.c

-- 
2.7.4

[dpdk-dev] [PATCH v4 1/3] crypto/scheduler: add packet size based mode code

[Fan Zhang]

This patch adds the packet size based distribution mode main source
file.

Packet-size based distribution mode is a scheduling mode works with 2
slaves, the primary slave and the secondary slave, and distributes the
enqueued crypto operations to them based on their data lengths. A crypto
operation will be distributed to the primary slave if its data length is
equal to or bigger than than the designated threshold, otherwise it will
be handled by the secondary slave.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
 .../crypto/scheduler/scheduler_pkt_size_distr.c    | 400 +++++++++++++++++++++
 1 file changed, 400 insertions(+)
 create mode 100644 drivers/crypto/scheduler/scheduler_pkt_size_distr.c

diff --git a/drivers/crypto/scheduler/scheduler_pkt_size_distr.c b/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
new file mode 100644
index 0000000..ffc6ff9
--- /dev/null
+++ b/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
@@ -0,0 +1,400 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_cryptodev.h>
+#include <rte_malloc.h>
+
+#include "rte_cryptodev_scheduler_operations.h"
+#include "scheduler_pmd_private.h"
+
+#define DEF_PKT_SIZE_THRESHOLD			(0x0000ff80)
+#define SLAVE_IDX_SWITCH_MASK			(0x01)
+#define PRIMARY_SLAVE_IDX			0
+#define SECONDARY_SLAVE_IDX			1
+#define NB_PKT_SIZE_SLAVES			2
+
+/** pkt size based scheduler context */
+struct psd_scheduler_ctx {
+	uint32_t threshold;
+};
+
+/** pkt size based scheduler queue pair context */
+struct psd_scheduler_qp_ctx {
+	struct scheduler_slave primary_slave;
+	struct scheduler_slave secondary_slave;
+	uint32_t threshold;
+	uint8_t deq_idx;
+} __rte_cache_aligned;
+
+/** scheduling operation variables' wrapping */
+struct psd_schedule_op {
+	uint8_t slave_idx;
+	uint16_t pos;
+};
+
+static uint16_t
+schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
+{
+	struct psd_scheduler_qp_ctx *qp_ctx =
+			((struct scheduler_qp_ctx *)qp)->private_qp_ctx;
+	struct rte_crypto_op *sched_ops[NB_PKT_SIZE_SLAVES][nb_ops];
+	struct rte_cryptodev_sym_session *sessions[NB_PKT_SIZE_SLAVES][nb_ops];
+	struct scheduler_session *sess;
+	struct psd_schedule_op enq_ops[NB_PKT_SIZE_SLAVES] = {
+		{PRIMARY_SLAVE_IDX, 0}, {SECONDARY_SLAVE_IDX, 0}
+	};
+	struct psd_schedule_op *p_enq_op;
+	uint16_t i, processed_ops_pri = 0, processed_ops_sec = 0;
+	uint32_t job_len, wr_back_idx = nb_ops;
+
+	if (unlikely(nb_ops == 0))
+		return 0;
+
+	for (i = 0; i < nb_ops && i < 4; i++) {
+		rte_prefetch0(ops[i]->sym);
+		rte_prefetch0(ops[i]->sym->session);
+	}
+
+	for (i = 0; (i < (nb_ops - 8)) && (nb_ops > 8); i += 4) {
+		rte_prefetch0(ops[i + 4]->sym);
+		rte_prefetch0(ops[i + 4]->sym->session);
+		rte_prefetch0(ops[i + 5]->sym);
+		rte_prefetch0(ops[i + 5]->sym->session);
+		rte_prefetch0(ops[i + 6]->sym);
+		rte_prefetch0(ops[i + 6]->sym->session);
+		rte_prefetch0(ops[i + 7]->sym);
+		rte_prefetch0(ops[i + 7]->sym->session);
+
+		sess = (struct scheduler_session *)
+				ops[i]->sym->session->_private;
+		job_len = ops[i]->sym->cipher.data.length;
+		job_len += (ops[i]->sym->auth.data.length == 0) *
+				ops[i]->sym->auth.data.length;
+		/* decide the target op based on the job length */
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i];
+		sessions[p_enq_op->slave_idx][p_enq_op->pos] =
+				ops[i]->sym->session;
+		ops[i]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		sess = (struct scheduler_session *)
+				ops[i+1]->sym->session->_private;
+		job_len = ops[i+1]->sym->cipher.data.length;
+		job_len += (ops[i+1]->sym->auth.data.length == 0) *
+				ops[i+1]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i+1];
+		sessions[p_enq_op->slave_idx][p_enq_op->pos] =
+				ops[i+1]->sym->session;
+		ops[i+1]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		sess = (struct scheduler_session *)
+				ops[i+2]->sym->session->_private;
+		job_len = ops[i+2]->sym->cipher.data.length;
+		job_len += (ops[i+2]->sym->auth.data.length == 0) *
+				ops[i+2]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i+2];
+		sessions[p_enq_op->slave_idx][p_enq_op->pos] =
+				ops[i+2]->sym->session;
+		ops[i+2]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		sess = (struct scheduler_session *)
+				ops[i+3]->sym->session->_private;
+
+		job_len = ops[i+3]->sym->cipher.data.length;
+		job_len += (ops[i+3]->sym->auth.data.length == 0) *
+				ops[i+3]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i+3];
+		sessions[p_enq_op->slave_idx][p_enq_op->pos] =
+				ops[i+3]->sym->session;
+		ops[i+3]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+	}
+
+	for (; i < nb_ops; i++) {
+		sess = (struct scheduler_session *)
+				ops[i]->sym->session->_private;
+
+		job_len = ops[i]->sym->cipher.data.length;
+		job_len += (ops[i]->sym->auth.data.length == 0) *
+				ops[i]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i];
+		sessions[p_enq_op->slave_idx][p_enq_op->pos] =
+				ops[i]->sym->session;
+		ops[i]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+	}
+
+	processed_ops_pri = rte_cryptodev_enqueue_burst(
+			qp_ctx->primary_slave.dev_id,
+			qp_ctx->primary_slave.qp_id,
+			sched_ops[PRIMARY_SLAVE_IDX],
+			enq_ops[PRIMARY_SLAVE_IDX].pos);
+	qp_ctx->primary_slave.nb_inflight_cops += processed_ops_pri;
+
+	/* for cops failed to enqueue, overwrite to ops */
+	if (processed_ops_pri < enq_ops[PRIMARY_SLAVE_IDX].pos) {
+		for (i = processed_ops_pri; i < enq_ops[PRIMARY_SLAVE_IDX].pos;
+				i++) {
+			sched_ops[PRIMARY_SLAVE_IDX][i]->sym->session =
+					sessions[PRIMARY_SLAVE_IDX][i];
+			ops[wr_back_idx - enq_ops[PRIMARY_SLAVE_IDX].pos + i] =
+					sched_ops[PRIMARY_SLAVE_IDX][i];
+		}
+
+		wr_back_idx -= (enq_ops[PRIMARY_SLAVE_IDX].pos -
+				processed_ops_pri);
+	}
+
+	processed_ops_sec = rte_cryptodev_enqueue_burst(
+			qp_ctx->secondary_slave.dev_id,
+			qp_ctx->secondary_slave.qp_id,
+			sched_ops[SECONDARY_SLAVE_IDX],
+			enq_ops[SECONDARY_SLAVE_IDX].pos);
+	qp_ctx->secondary_slave.nb_inflight_cops += processed_ops_sec;
+
+	/* for cops failed to enqueue, recover session */
+	/* for cops failed to enqueue, overwrite to ops */
+	if (processed_ops_sec < enq_ops[SECONDARY_SLAVE_IDX].pos) {
+		for (i = processed_ops_sec;
+				i < enq_ops[SECONDARY_SLAVE_IDX].pos; i++) {
+			sched_ops[PRIMARY_SLAVE_IDX][i]->sym->session =
+					sessions[SECONDARY_SLAVE_IDX][i];
+			ops[wr_back_idx - enq_ops[SECONDARY_SLAVE_IDX].pos + i] =
+					sched_ops[SECONDARY_SLAVE_IDX][i];
+		}
+	}
+
+	return processed_ops_pri + processed_ops_sec;
+}
+
+static uint16_t
+schedule_enqueue_ordering(void *qp, struct rte_crypto_op **ops,
+		uint16_t nb_ops)
+{
+	struct rte_ring *order_ring =
+			((struct scheduler_qp_ctx *)qp)->order_ring;
+	uint16_t nb_ops_to_enq = get_max_enqueue_order_count(order_ring,
+			nb_ops);
+	uint16_t nb_ops_enqd = schedule_enqueue(qp, ops,
+			nb_ops_to_enq);
+
+	scheduler_order_insert(order_ring, ops, nb_ops_enqd);
+
+	return nb_ops_enqd;
+}
+
+static uint16_t
+schedule_dequeue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
+{
+	struct psd_scheduler_qp_ctx *qp_ctx =
+			((struct scheduler_qp_ctx *)qp)->private_qp_ctx;
+	struct scheduler_slave *slaves[NB_PKT_SIZE_SLAVES] = {
+			&qp_ctx->primary_slave, &qp_ctx->secondary_slave};
+	struct scheduler_slave *slave = slaves[qp_ctx->deq_idx];
+	uint16_t nb_deq_ops_pri = 0, nb_deq_ops_sec = 0;
+
+	if (slave->nb_inflight_cops) {
+		nb_deq_ops_pri = rte_cryptodev_dequeue_burst(slave->dev_id,
+			slave->qp_id, ops, nb_ops);
+		slave->nb_inflight_cops -= nb_deq_ops_pri;
+	}
+
+	qp_ctx->deq_idx = (~qp_ctx->deq_idx) & SLAVE_IDX_SWITCH_MASK;
+
+	if (nb_deq_ops_pri == nb_ops)
+		return nb_deq_ops_pri;
+
+	slave = slaves[qp_ctx->deq_idx];
+
+	if (slave->nb_inflight_cops) {
+		nb_deq_ops_sec = rte_cryptodev_dequeue_burst(slave->dev_id,
+				slave->qp_id, &ops[nb_deq_ops_pri],
+				nb_ops - nb_deq_ops_pri);
+		slave->nb_inflight_cops -= nb_deq_ops_sec;
+	}
+
+	return nb_deq_ops_pri + nb_deq_ops_sec;
+}
+
+static uint16_t
+schedule_dequeue_ordering(void *qp, struct rte_crypto_op **ops,
+		uint16_t nb_ops)
+{
+	struct rte_ring *order_ring =
+			((struct scheduler_qp_ctx *)qp)->order_ring;
+
+	schedule_dequeue(qp, ops, nb_ops);
+
+	return scheduler_order_drain(order_ring, ops, nb_ops);
+}
+
+static int
+slave_attach(__rte_unused struct rte_cryptodev *dev,
+		__rte_unused uint8_t slave_id)
+{
+	return 0;
+}
+
+static int
+slave_detach(__rte_unused struct rte_cryptodev *dev,
+		__rte_unused uint8_t slave_id)
+{
+	return 0;
+}
+
+static int
+scheduler_start(struct rte_cryptodev *dev)
+{
+	struct scheduler_ctx *sched_ctx = dev->data->dev_private;
+	struct psd_scheduler_ctx *psd_ctx = sched_ctx->private_ctx;
+	uint16_t i;
+
+	/* for packet size based scheduler, nb_slaves have to >= 2 */
+	if (sched_ctx->nb_slaves < NB_PKT_SIZE_SLAVES) {
+		CS_LOG_ERR("not enough slaves to start");
+		return -1;
+	}
+
+	for (i = 0; i < dev->data->nb_queue_pairs; i++) {
+		struct scheduler_qp_ctx *qp_ctx = dev->data->queue_pairs[i];
+		struct psd_scheduler_qp_ctx *ps_qp_ctx =
+				qp_ctx->private_qp_ctx;
+
+		ps_qp_ctx->primary_slave.dev_id =
+				sched_ctx->slaves[PRIMARY_SLAVE_IDX].dev_id;
+		ps_qp_ctx->primary_slave.qp_id = i;
+		ps_qp_ctx->primary_slave.nb_inflight_cops = 0;
+
+		ps_qp_ctx->secondary_slave.dev_id =
+				sched_ctx->slaves[SECONDARY_SLAVE_IDX].dev_id;
+		ps_qp_ctx->secondary_slave.qp_id = i;
+		ps_qp_ctx->secondary_slave.nb_inflight_cops = 0;
+
+		ps_qp_ctx->threshold = psd_ctx->threshold;
+	}
+
+	if (sched_ctx->reordering_enabled) {
+		dev->enqueue_burst = &schedule_enqueue_ordering;
+		dev->dequeue_burst = &schedule_dequeue_ordering;
+	} else {
+		dev->enqueue_burst = &schedule_enqueue;
+		dev->dequeue_burst = &schedule_dequeue;
+	}
+
+	return 0;
+}
+
+static int
+scheduler_stop(struct rte_cryptodev *dev)
+{
+	uint16_t i;
+
+	for (i = 0; i < dev->data->nb_queue_pairs; i++) {
+		struct scheduler_qp_ctx *qp_ctx = dev->data->queue_pairs[i];
+		struct psd_scheduler_qp_ctx *ps_qp_ctx = qp_ctx->private_qp_ctx;
+
+		if (ps_qp_ctx->primary_slave.nb_inflight_cops +
+				ps_qp_ctx->secondary_slave.nb_inflight_cops) {
+			CS_LOG_ERR("Some crypto ops left in slave queue");
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static int
+scheduler_config_qp(struct rte_cryptodev *dev, uint16_t qp_id)
+{
+	struct scheduler_qp_ctx *qp_ctx = dev->data->queue_pairs[qp_id];
+	struct psd_scheduler_qp_ctx *ps_qp_ctx;
+
+	ps_qp_ctx = rte_zmalloc_socket(NULL, sizeof(*ps_qp_ctx), 0,
+			rte_socket_id());
+	if (!ps_qp_ctx) {
+		CS_LOG_ERR("failed allocate memory for private queue pair");
+		return -ENOMEM;
+	}
+
+	qp_ctx->private_qp_ctx = (void *)ps_qp_ctx;
+
+	return 0;
+}
+
+static int
+scheduler_create_private_ctx(struct rte_cryptodev *dev)
+{
+	struct scheduler_ctx *sched_ctx = dev->data->dev_private;
+	struct psd_scheduler_ctx *psd_ctx;
+
+	if (sched_ctx->private_ctx)
+		rte_free(sched_ctx->private_ctx);
+
+	psd_ctx = rte_zmalloc_socket(NULL, sizeof(struct psd_scheduler_ctx), 0,
+			rte_socket_id());
+	if (!psd_ctx) {
+		CS_LOG_ERR("failed allocate memory");
+		return -ENOMEM;
+	}
+
+	psd_ctx->threshold = DEF_PKT_SIZE_THRESHOLD;
+
+	sched_ctx->private_ctx = (void *)psd_ctx;
+
+	return 0;
+}
+
+struct rte_cryptodev_scheduler_ops scheduler_ps_ops = {
+	slave_attach,
+	slave_detach,
+	scheduler_start,
+	scheduler_stop,
+	scheduler_config_qp,
+	scheduler_create_private_ctx,
+};
+
+struct rte_cryptodev_scheduler psd_scheduler = {
+		.name = "packet-size-based-scheduler",
+		.description = "scheduler which will distribute crypto op "
+				"burst based on the packet size",
+		.mode = CDEV_SCHED_MODE_PKT_SIZE_DISTR,
+		.ops = &scheduler_ps_ops
+};
+
+struct rte_cryptodev_scheduler *pkt_size_based_distr_scheduler = &psd_scheduler;
-- 
2.7.4

Re: [dpdk-dev] [PATCH v4 1/3] crypto/scheduler: add packet size based mode code

[Declan Doherty]

On 29/03/2017 9:25 AM, Fan Zhang wrote:
> This patch adds the packet size based distribution mode main source
> file.
>
> Packet-size based distribution mode is a scheduling mode works with 2
> slaves, the primary slave and the secondary slave, and distributes the
> enqueued crypto operations to them based on their data lengths. A crypto
> operation will be distributed to the primary slave if its data length is
> equal to or bigger than than the designated threshold, otherwise it will
> be handled by the secondary slave.
>
> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
> ---
...
>

Acked-by: Declan Doherty <declan.doherty@intel.com>

[dpdk-dev] [PATCH v4 2/3] crypto/scheduler: enable packet size based scheduling mode

[Fan Zhang]

This patch enables the packet size based scheduling mode in scheduler PMD.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
 drivers/crypto/scheduler/Makefile                  | 1 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.c | 7 +++++++
 drivers/crypto/scheduler/rte_cryptodev_scheduler.h | 3 +++
 3 files changed, 11 insertions(+)

diff --git a/drivers/crypto/scheduler/Makefile b/drivers/crypto/scheduler/Makefile
index 0cce6f2..93e135f 100644
--- a/drivers/crypto/scheduler/Makefile
+++ b/drivers/crypto/scheduler/Makefile
@@ -54,6 +54,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pmd.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pmd_ops.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += rte_cryptodev_scheduler.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_roundrobin.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pkt_size_distr.c
 
 # library dependencies
 DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += lib/librte_cryptodev
diff --git a/drivers/crypto/scheduler/rte_cryptodev_scheduler.c b/drivers/crypto/scheduler/rte_cryptodev_scheduler.c
index 11e8143..eab1906 100644
--- a/drivers/crypto/scheduler/rte_cryptodev_scheduler.c
+++ b/drivers/crypto/scheduler/rte_cryptodev_scheduler.c
@@ -336,6 +336,13 @@ rte_crpytodev_scheduler_mode_set(uint8_t scheduler_id,
 			return -1;
 		}
 		break;
+	case CDEV_SCHED_MODE_PKT_SIZE_DISTR:
+		if (rte_cryptodev_scheduler_load_user_scheduler(scheduler_id,
+				pkt_size_based_distr_scheduler) < 0) {
+			CS_LOG_ERR("Failed to load scheduler");
+			return -1;
+		}
+		break;
 	default:
 		CS_LOG_ERR("Not yet supported");
 		return -ENOTSUP;
diff --git a/drivers/crypto/scheduler/rte_cryptodev_scheduler.h b/drivers/crypto/scheduler/rte_cryptodev_scheduler.h
index 7ef44e7..a1d4c14 100644
--- a/drivers/crypto/scheduler/rte_cryptodev_scheduler.h
+++ b/drivers/crypto/scheduler/rte_cryptodev_scheduler.h
@@ -47,6 +47,8 @@ enum rte_cryptodev_scheduler_mode {
 	CDEV_SCHED_MODE_NOT_SET = 0,
 	CDEV_SCHED_MODE_USERDEFINED,
 	CDEV_SCHED_MODE_ROUNDROBIN,
+	/** packet-size based distribution mode */
+	CDEV_SCHED_MODE_PKT_SIZE_DISTR,
 
 	CDEV_SCHED_MODE_COUNT /* number of modes */
 };
@@ -158,6 +160,7 @@ struct rte_cryptodev_scheduler {
 };
 
 extern struct rte_cryptodev_scheduler *roundrobin_scheduler;
+extern struct rte_cryptodev_scheduler *pkt_size_based_distr_scheduler;
 
 #ifdef __cplusplus
 }
-- 
2.7.4

[dpdk-dev] [PATCH v4 3/3] doc: update cryptodev scheduler PMD documentation

[Fan Zhang]

This patch updates packet size based scheduling mode description.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
v4:
- Fixed grammer errors in documentation
- Polished documentation

 doc/guides/cryptodevs/scheduler.rst | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/doc/guides/cryptodevs/scheduler.rst b/doc/guides/cryptodevs/scheduler.rst
index 70fb62e..af54daf 100644
--- a/doc/guides/cryptodevs/scheduler.rst
+++ b/doc/guides/cryptodevs/scheduler.rst
@@ -126,3 +126,18 @@ operation:
    among its slaves in a round-robin manner. This mode may help to fill
    the throughput gap between the physical core and the existing cryptodevs
    to increase the overall performance.
+
+*   **CDEV_SCHED_MODE_PKT_SIZE_DISTR:**
+
+   Packet-size based distribution mode, which works with 2 slaves, the primary
+   slave and the secondary slave, and distributes the enqueued crypto
+   operations to them based on their data lengths. A crypto operation will be
+   distributed to the primary slave if its data length is equal to or bigger
+   than the designated threshold, otherwise it will be handled by the secondary
+   slave.
+
+   A typical usecase in this mode is with the QAT cryptodev as the primary and
+   a software cryptodev as the secondary slave. This may help applications to
+   process additional crypto workload than what the QAT cryptodev can handle on
+   its own, by making use of the available CPU cycles to deal with smaller
+   crypto workloads.
-- 
2.7.4

Re: [dpdk-dev] [PATCH v4 3/3] doc: update cryptodev scheduler PMD documentation

[Mcnamara, John]

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Fan Zhang
> Sent: Wednesday, March 29, 2017 9:26 AM
> To: dev@dpdk.org
> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; Gonzalez
> Monroy, Sergio <sergio.gonzalez.monroy@intel.com>; Doherty, Declan
> <declan.doherty@intel.com>
> Subject: [dpdk-dev] [PATCH v4 3/3] doc: update cryptodev scheduler PMD
> documentation
> 
> This patch updates packet size based scheduling mode description.
> 
> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>

Acked-by: John McNamara <john.mcnamara@intel.com>

[dpdk-dev] [PATCH v5 0/3] crypto/scheduler: add packet-base scheduling mode

[Fan Zhang]

Packet-size based distribution mode is a scheduling mode that works with
2 slaves, the primary slave and the secondary slave, and distributes the
enqueued crypto operations to them based on their data lengths. A crypto
operation will be distributed to the primary slave if its data length is
equal to or bigger than the designated threshold, otherwise it will be
handled by the secondary slave.

v5:
- Updated release notes
- Update enqueue and dequeue functions

v4:
- Polished documentation.
- Fixed documentation grammer errors.

v3:
- Uses 2 sched_ops array instead of one.
- Copy the failed-to-enqueue crypto ops back to the end of ops array.
- Dequeue_ordering will directly use schedule_dequeue function instead of
  excessive dequeue.

v2:
- Update with new reorder method.

Series-acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Fan Zhang (3):
  crypto/scheduler: add packet size based mode code
  crypto/scheduler: enable packet size based scheduling mode
  doc: update cryptodev scheduler PMD documentation

 doc/guides/cryptodevs/scheduler.rst                |  15 +
 doc/guides/rel_notes/release_17_05.rst             |   5 +
 drivers/crypto/scheduler/Makefile                  |   1 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.c |   7 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.h |   3 +
 .../crypto/scheduler/scheduler_pkt_size_distr.c    | 410 +++++++++++++++++++++
 drivers/crypto/scheduler/scheduler_pmd_ops.c       |   2 +
 drivers/crypto/scheduler/scheduler_pmd_private.h   |   2 +
 8 files changed, 445 insertions(+)
 create mode 100644 drivers/crypto/scheduler/scheduler_pkt_size_distr.c

-- 
2.7.4

[dpdk-dev] [PATCH v5 1/3] crypto/scheduler: add packet size based mode code

[Fan Zhang]

This patch adds the packet size based distribution mode main source
file.

Packet-size based distribution mode is a scheduling mode works with 2
slaves, primary slave and secondary slave, and distribute the enqueued
crypto ops to them based on their data lengths. A crypto op will be
distributed to the primary slave if its data length equals or bigger
than the designated threshold, otherwise it will be handled by the
secondary slave.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Series-acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 .../crypto/scheduler/scheduler_pkt_size_distr.c    | 410 +++++++++++++++++++++
 1 file changed, 410 insertions(+)
 create mode 100644 drivers/crypto/scheduler/scheduler_pkt_size_distr.c

diff --git a/drivers/crypto/scheduler/scheduler_pkt_size_distr.c b/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
new file mode 100644
index 0000000..8da10c8
--- /dev/null
+++ b/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
@@ -0,0 +1,410 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_cryptodev.h>
+#include <rte_malloc.h>
+
+#include "rte_cryptodev_scheduler_operations.h"
+#include "scheduler_pmd_private.h"
+
+#define DEF_PKT_SIZE_THRESHOLD			(0xffffff80)
+#define SLAVE_IDX_SWITCH_MASK			(0x01)
+#define PRIMARY_SLAVE_IDX			0
+#define SECONDARY_SLAVE_IDX			1
+#define NB_PKT_SIZE_SLAVES			2
+
+/** pkt size based scheduler context */
+struct psd_scheduler_ctx {
+	uint32_t threshold;
+};
+
+/** pkt size based scheduler queue pair context */
+struct psd_scheduler_qp_ctx {
+	struct scheduler_slave primary_slave;
+	struct scheduler_slave secondary_slave;
+	uint32_t threshold;
+	uint32_t max_nb_objs;
+	uint8_t deq_idx;
+} __rte_cache_aligned;
+
+/** scheduling operation variables' wrapping */
+struct psd_schedule_op {
+	uint8_t slave_idx;
+	uint16_t pos;
+};
+
+static uint16_t
+schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
+{
+	struct psd_scheduler_qp_ctx *qp_ctx =
+			((struct scheduler_qp_ctx *)qp)->private_qp_ctx;
+	struct rte_crypto_op *sched_ops[NB_PKT_SIZE_SLAVES][nb_ops];
+	struct scheduler_session *sess;
+	uint32_t in_flight_ops[NB_PKT_SIZE_SLAVES] = {
+			qp_ctx->primary_slave.nb_inflight_cops,
+			qp_ctx->secondary_slave.nb_inflight_cops
+	};
+	struct psd_schedule_op enq_ops[NB_PKT_SIZE_SLAVES] = {
+		{PRIMARY_SLAVE_IDX, 0}, {SECONDARY_SLAVE_IDX, 0}
+	};
+	struct psd_schedule_op *p_enq_op;
+	uint16_t i, processed_ops_pri = 0, processed_ops_sec = 0;
+	uint32_t job_len;
+
+	if (unlikely(nb_ops == 0))
+		return 0;
+
+	for (i = 0; i < nb_ops && i < 4; i++) {
+		rte_prefetch0(ops[i]->sym);
+		rte_prefetch0(ops[i]->sym->session);
+	}
+
+	for (i = 0; (i < (nb_ops - 8)) && (nb_ops > 8); i += 4) {
+		rte_prefetch0(ops[i + 4]->sym);
+		rte_prefetch0(ops[i + 4]->sym->session);
+		rte_prefetch0(ops[i + 5]->sym);
+		rte_prefetch0(ops[i + 5]->sym->session);
+		rte_prefetch0(ops[i + 6]->sym);
+		rte_prefetch0(ops[i + 6]->sym->session);
+		rte_prefetch0(ops[i + 7]->sym);
+		rte_prefetch0(ops[i + 7]->sym->session);
+
+		sess = (struct scheduler_session *)
+				ops[i]->sym->session->_private;
+		/* job_len is initialized as cipher data length, once
+		 * it is 0, equals to auth data length
+		 */
+		job_len = ops[i]->sym->cipher.data.length;
+		job_len += (ops[i]->sym->cipher.data.length == 0) *
+				ops[i]->sym->auth.data.length;
+		/* decide the target op based on the job length */
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i];
+		ops[i]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		/* stop schedule cops before the queue is full, this shall
+		 * prevent the failed enqueue
+		 */
+		if (p_enq_op->pos + in_flight_ops[p_enq_op->slave_idx] >=
+				qp_ctx->max_nb_objs) {
+			i = nb_ops;
+			break;
+		}
+
+		sess = (struct scheduler_session *)
+				ops[i+1]->sym->session->_private;
+		job_len = ops[i+1]->sym->cipher.data.length;
+		job_len += (ops[i+1]->sym->cipher.data.length == 0) *
+				ops[i+1]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i+1];
+		ops[i+1]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		if (p_enq_op->pos + in_flight_ops[p_enq_op->slave_idx] >=
+				qp_ctx->max_nb_objs) {
+			i = nb_ops;
+			break;
+		}
+
+		sess = (struct scheduler_session *)
+				ops[i+2]->sym->session->_private;
+		job_len = ops[i+2]->sym->cipher.data.length;
+		job_len += (ops[i+2]->sym->cipher.data.length == 0) *
+				ops[i+2]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i+2];
+		ops[i+2]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		if (p_enq_op->pos + in_flight_ops[p_enq_op->slave_idx] >=
+				qp_ctx->max_nb_objs) {
+			i = nb_ops;
+			break;
+		}
+
+		sess = (struct scheduler_session *)
+				ops[i+3]->sym->session->_private;
+
+		job_len = ops[i+3]->sym->cipher.data.length;
+		job_len += (ops[i+3]->sym->cipher.data.length == 0) *
+				ops[i+3]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i+3];
+		ops[i+3]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		if (p_enq_op->pos + in_flight_ops[p_enq_op->slave_idx] >=
+				qp_ctx->max_nb_objs) {
+			i = nb_ops;
+			break;
+		}
+	}
+
+	for (; i < nb_ops; i++) {
+		sess = (struct scheduler_session *)
+				ops[i]->sym->session->_private;
+
+		job_len = ops[i]->sym->cipher.data.length;
+		job_len += (ops[i]->sym->cipher.data.length == 0) *
+				ops[i]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i];
+		ops[i]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		if (p_enq_op->pos + in_flight_ops[p_enq_op->slave_idx] >=
+				qp_ctx->max_nb_objs) {
+			i = nb_ops;
+			break;
+		}
+	}
+
+	processed_ops_pri = rte_cryptodev_enqueue_burst(
+			qp_ctx->primary_slave.dev_id,
+			qp_ctx->primary_slave.qp_id,
+			sched_ops[PRIMARY_SLAVE_IDX],
+			enq_ops[PRIMARY_SLAVE_IDX].pos);
+	qp_ctx->primary_slave.nb_inflight_cops += processed_ops_pri;
+
+	processed_ops_sec = rte_cryptodev_enqueue_burst(
+			qp_ctx->secondary_slave.dev_id,
+			qp_ctx->secondary_slave.qp_id,
+			sched_ops[SECONDARY_SLAVE_IDX],
+			enq_ops[SECONDARY_SLAVE_IDX].pos);
+	qp_ctx->secondary_slave.nb_inflight_cops += processed_ops_sec;
+
+	return processed_ops_pri + processed_ops_sec;
+}
+
+static uint16_t
+schedule_enqueue_ordering(void *qp, struct rte_crypto_op **ops,
+		uint16_t nb_ops)
+{
+	struct rte_ring *order_ring =
+			((struct scheduler_qp_ctx *)qp)->order_ring;
+	uint16_t nb_ops_to_enq = get_max_enqueue_order_count(order_ring,
+			nb_ops);
+	uint16_t nb_ops_enqd = schedule_enqueue(qp, ops,
+			nb_ops_to_enq);
+
+	scheduler_order_insert(order_ring, ops, nb_ops_enqd);
+
+	return nb_ops_enqd;
+}
+
+static uint16_t
+schedule_dequeue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
+{
+	struct psd_scheduler_qp_ctx *qp_ctx =
+			((struct scheduler_qp_ctx *)qp)->private_qp_ctx;
+	struct scheduler_slave *slaves[NB_PKT_SIZE_SLAVES] = {
+			&qp_ctx->primary_slave, &qp_ctx->secondary_slave};
+	struct scheduler_slave *slave = slaves[qp_ctx->deq_idx];
+	uint16_t nb_deq_ops_pri = 0, nb_deq_ops_sec = 0;
+
+	if (slave->nb_inflight_cops) {
+		nb_deq_ops_pri = rte_cryptodev_dequeue_burst(slave->dev_id,
+			slave->qp_id, ops, nb_ops);
+		slave->nb_inflight_cops -= nb_deq_ops_pri;
+	}
+
+	qp_ctx->deq_idx = (~qp_ctx->deq_idx) & SLAVE_IDX_SWITCH_MASK;
+
+	if (nb_deq_ops_pri == nb_ops)
+		return nb_deq_ops_pri;
+
+	slave = slaves[qp_ctx->deq_idx];
+
+	if (slave->nb_inflight_cops) {
+		nb_deq_ops_sec = rte_cryptodev_dequeue_burst(slave->dev_id,
+				slave->qp_id, &ops[nb_deq_ops_pri],
+				nb_ops - nb_deq_ops_pri);
+		slave->nb_inflight_cops -= nb_deq_ops_sec;
+
+		if (!slave->nb_inflight_cops)
+			qp_ctx->deq_idx = (~qp_ctx->deq_idx) &
+					SLAVE_IDX_SWITCH_MASK;
+	}
+
+	return nb_deq_ops_pri + nb_deq_ops_sec;
+}
+
+static uint16_t
+schedule_dequeue_ordering(void *qp, struct rte_crypto_op **ops,
+		uint16_t nb_ops)
+{
+	struct rte_ring *order_ring =
+			((struct scheduler_qp_ctx *)qp)->order_ring;
+
+	schedule_dequeue(qp, ops, nb_ops);
+
+	return scheduler_order_drain(order_ring, ops, nb_ops);
+}
+
+static int
+slave_attach(__rte_unused struct rte_cryptodev *dev,
+		__rte_unused uint8_t slave_id)
+{
+	return 0;
+}
+
+static int
+slave_detach(__rte_unused struct rte_cryptodev *dev,
+		__rte_unused uint8_t slave_id)
+{
+	return 0;
+}
+
+static int
+scheduler_start(struct rte_cryptodev *dev)
+{
+	struct scheduler_ctx *sched_ctx = dev->data->dev_private;
+	struct psd_scheduler_ctx *psd_ctx = sched_ctx->private_ctx;
+	uint16_t i;
+
+	/* for packet size based scheduler, nb_slaves have to >= 2 */
+	if (sched_ctx->nb_slaves < NB_PKT_SIZE_SLAVES) {
+		CS_LOG_ERR("not enough slaves to start");
+		return -1;
+	}
+
+	for (i = 0; i < dev->data->nb_queue_pairs; i++) {
+		struct scheduler_qp_ctx *qp_ctx = dev->data->queue_pairs[i];
+		struct psd_scheduler_qp_ctx *ps_qp_ctx =
+				qp_ctx->private_qp_ctx;
+
+		ps_qp_ctx->primary_slave.dev_id =
+				sched_ctx->slaves[PRIMARY_SLAVE_IDX].dev_id;
+		ps_qp_ctx->primary_slave.qp_id = i;
+		ps_qp_ctx->primary_slave.nb_inflight_cops = 0;
+
+		ps_qp_ctx->secondary_slave.dev_id =
+				sched_ctx->slaves[SECONDARY_SLAVE_IDX].dev_id;
+		ps_qp_ctx->secondary_slave.qp_id = i;
+		ps_qp_ctx->secondary_slave.nb_inflight_cops = 0;
+
+		ps_qp_ctx->threshold = psd_ctx->threshold;
+
+		ps_qp_ctx->max_nb_objs = sched_ctx->qp_conf.nb_descriptors;
+	}
+
+	if (sched_ctx->reordering_enabled) {
+		dev->enqueue_burst = &schedule_enqueue_ordering;
+		dev->dequeue_burst = &schedule_dequeue_ordering;
+	} else {
+		dev->enqueue_burst = &schedule_enqueue;
+		dev->dequeue_burst = &schedule_dequeue;
+	}
+
+	return 0;
+}
+
+static int
+scheduler_stop(struct rte_cryptodev *dev)
+{
+	uint16_t i;
+
+	for (i = 0; i < dev->data->nb_queue_pairs; i++) {
+		struct scheduler_qp_ctx *qp_ctx = dev->data->queue_pairs[i];
+		struct psd_scheduler_qp_ctx *ps_qp_ctx = qp_ctx->private_qp_ctx;
+
+		if (ps_qp_ctx->primary_slave.nb_inflight_cops +
+				ps_qp_ctx->secondary_slave.nb_inflight_cops) {
+			CS_LOG_ERR("Some crypto ops left in slave queue");
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static int
+scheduler_config_qp(struct rte_cryptodev *dev, uint16_t qp_id)
+{
+	struct scheduler_qp_ctx *qp_ctx = dev->data->queue_pairs[qp_id];
+	struct psd_scheduler_qp_ctx *ps_qp_ctx;
+
+	ps_qp_ctx = rte_zmalloc_socket(NULL, sizeof(*ps_qp_ctx), 0,
+			rte_socket_id());
+	if (!ps_qp_ctx) {
+		CS_LOG_ERR("failed allocate memory for private queue pair");
+		return -ENOMEM;
+	}
+
+	qp_ctx->private_qp_ctx = (void *)ps_qp_ctx;
+
+	return 0;
+}
+
+static int
+scheduler_create_private_ctx(struct rte_cryptodev *dev)
+{
+	struct scheduler_ctx *sched_ctx = dev->data->dev_private;
+	struct psd_scheduler_ctx *psd_ctx;
+
+	if (sched_ctx->private_ctx)
+		rte_free(sched_ctx->private_ctx);
+
+	psd_ctx = rte_zmalloc_socket(NULL, sizeof(struct psd_scheduler_ctx), 0,
+			rte_socket_id());
+	if (!psd_ctx) {
+		CS_LOG_ERR("failed allocate memory");
+		return -ENOMEM;
+	}
+
+	psd_ctx->threshold = DEF_PKT_SIZE_THRESHOLD;
+
+	sched_ctx->private_ctx = (void *)psd_ctx;
+
+	return 0;
+}
+
+struct rte_cryptodev_scheduler_ops scheduler_ps_ops = {
+	slave_attach,
+	slave_detach,
+	scheduler_start,
+	scheduler_stop,
+	scheduler_config_qp,
+	scheduler_create_private_ctx,
+};
+
+struct rte_cryptodev_scheduler psd_scheduler = {
+		.name = "packet-size-based-scheduler",
+		.description = "scheduler which will distribute crypto op "
+				"burst based on the packet size",
+		.mode = CDEV_SCHED_MODE_PKT_SIZE_DISTR,
+		.ops = &scheduler_ps_ops
+};
+
+struct rte_cryptodev_scheduler *pkt_size_based_distr_scheduler = &psd_scheduler;
-- 
2.7.4

Re: [dpdk-dev] [PATCH v5 1/3] crypto/scheduler: add packet size based mode code

[De Lara Guarch, Pablo]

Hi Fan,

> -----Original Message-----
> From: Zhang, Roy Fan
> Sent: Wednesday, March 29, 2017 5:26 PM
> To: dev@dpdk.org
> Cc: De Lara Guarch, Pablo; Gonzalez Monroy, Sergio; Doherty, Declan
> Subject: [PATCH v5 1/3] crypto/scheduler: add packet size based mode
> code
> 
> This patch adds the packet size based distribution mode main source
> file.
> 
> Packet-size based distribution mode is a scheduling mode works with 2
> slaves, primary slave and secondary slave, and distribute the enqueued
> crypto ops to them based on their data lengths. A crypto op will be
> distributed to the primary slave if its data length equals or bigger
> than the designated threshold, otherwise it will be handled by the
> secondary slave.
> 
> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
> Series-acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

I haven't acked this patch yet :P. Actually, I have one comment below.

> ---
>  .../crypto/scheduler/scheduler_pkt_size_distr.c    | 410
> +++++++++++++++++++++
>  1 file changed, 410 insertions(+)
>  create mode 100644 drivers/crypto/scheduler/scheduler_pkt_size_distr.c
> 
> diff --git a/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
> b/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
> new file mode 100644
> index 0000000..8da10c8
> --- /dev/null
> +++ b/drivers/crypto/scheduler/scheduler_pkt_size_distr.c

...

> +static uint16_t
> +schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t
> nb_ops)
> +{

...

> +		job_len = ops[i]->sym->cipher.data.length;
> +		job_len += (ops[i]->sym->cipher.data.length == 0) *
> +				ops[i]->sym->auth.data.length;
> +		/* decide the target op based on the job length */
> +		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
> +		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i];
> +		ops[i]->sym->session = sess->sessions[p_enq_op-
> >slave_idx];
> +		p_enq_op->pos++;
> +
> +		/* stop schedule cops before the queue is full, this shall
> +		 * prevent the failed enqueue
> +		 */
> +		if (p_enq_op->pos + in_flight_ops[p_enq_op->slave_idx] >=
> +				qp_ctx->max_nb_objs) {
> +			i = nb_ops;
> +			break;
> +		}

If (in_flight_ops == qp_ctx->max_nb_objs), then you won't even be able to enqueue
a single crypto operation (as the device is completely full), but at this stage, 
you have already modified the session of the operation, so you need to avoid this situation.

Thanks,
Pablo

[dpdk-dev] [PATCH v5 2/3] crypto/scheduler: enable packet size based scheduling mode

[Fan Zhang]

This patch enables the packet size based scheduling mode in scheduler PMD.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
 drivers/crypto/scheduler/Makefile                  | 1 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.c | 7 +++++++
 drivers/crypto/scheduler/rte_cryptodev_scheduler.h | 3 +++
 drivers/crypto/scheduler/scheduler_pmd_ops.c       | 2 ++
 drivers/crypto/scheduler/scheduler_pmd_private.h   | 2 ++
 5 files changed, 15 insertions(+)

diff --git a/drivers/crypto/scheduler/Makefile b/drivers/crypto/scheduler/Makefile
index 187d3b6..0d51b1d 100644
--- a/drivers/crypto/scheduler/Makefile
+++ b/drivers/crypto/scheduler/Makefile
@@ -54,5 +54,6 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pmd.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pmd_ops.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += rte_cryptodev_scheduler.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_roundrobin.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pkt_size_distr.c
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/crypto/scheduler/rte_cryptodev_scheduler.c b/drivers/crypto/scheduler/rte_cryptodev_scheduler.c
index 2f49ad4..6a944fd 100644
--- a/drivers/crypto/scheduler/rte_cryptodev_scheduler.c
+++ b/drivers/crypto/scheduler/rte_cryptodev_scheduler.c
@@ -336,6 +336,13 @@ rte_crpytodev_scheduler_mode_set(uint8_t scheduler_id,
 			return -1;
 		}
 		break;
+	case CDEV_SCHED_MODE_PKT_SIZE_DISTR:
+		if (rte_cryptodev_scheduler_load_user_scheduler(scheduler_id,
+				pkt_size_based_distr_scheduler) < 0) {
+			CS_LOG_ERR("Failed to load scheduler");
+			return -1;
+		}
+		break;
 	default:
 		CS_LOG_ERR("Not yet supported");
 		return -ENOTSUP;
diff --git a/drivers/crypto/scheduler/rte_cryptodev_scheduler.h b/drivers/crypto/scheduler/rte_cryptodev_scheduler.h
index 98ab8f2..ddbd305 100644
--- a/drivers/crypto/scheduler/rte_cryptodev_scheduler.h
+++ b/drivers/crypto/scheduler/rte_cryptodev_scheduler.h
@@ -47,6 +47,8 @@ enum rte_cryptodev_scheduler_mode {
 	CDEV_SCHED_MODE_NOT_SET = 0,
 	CDEV_SCHED_MODE_USERDEFINED,
 	CDEV_SCHED_MODE_ROUNDROBIN,
+	/** packet-size based distribution mode */
+	CDEV_SCHED_MODE_PKT_SIZE_DISTR,
 
 	CDEV_SCHED_MODE_COUNT /* number of modes */
 };
@@ -158,6 +160,7 @@ struct rte_cryptodev_scheduler {
 };
 
 extern struct rte_cryptodev_scheduler *roundrobin_scheduler;
+extern struct rte_cryptodev_scheduler *pkt_size_based_distr_scheduler;
 
 #ifdef __cplusplus
 }
diff --git a/drivers/crypto/scheduler/scheduler_pmd_ops.c b/drivers/crypto/scheduler/scheduler_pmd_ops.c
index 968b4fb..f02506c 100644
--- a/drivers/crypto/scheduler/scheduler_pmd_ops.c
+++ b/drivers/crypto/scheduler/scheduler_pmd_ops.c
@@ -367,6 +367,8 @@ scheduler_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
 			return ret;
 	}
 
+	sched_ctx->qp_conf.nb_descriptors = qp_conf->nb_descriptors;
+
 	/* Allocate the queue pair data structure. */
 	qp_ctx = rte_zmalloc_socket(name, sizeof(*qp_ctx), RTE_CACHE_LINE_SIZE,
 			socket_id);
diff --git a/drivers/crypto/scheduler/scheduler_pmd_private.h b/drivers/crypto/scheduler/scheduler_pmd_private.h
index a7406f5..2feb3d1 100644
--- a/drivers/crypto/scheduler/scheduler_pmd_private.h
+++ b/drivers/crypto/scheduler/scheduler_pmd_private.h
@@ -89,6 +89,8 @@ struct scheduler_ctx {
 
 	uint8_t reordering_enabled;
 
+	struct rte_cryptodev_qp_conf qp_conf;
+
 	char name[RTE_CRYPTODEV_SCHEDULER_NAME_MAX_LEN];
 	char description[RTE_CRYPTODEV_SCHEDULER_DESC_MAX_LEN];
 } __rte_cache_aligned;
-- 
2.7.4

[dpdk-dev] [PATCH v5 3/3] doc: update cryptodev scheduler PMD documentation

[Fan Zhang]

This patch updates packet size based scheduling mode description.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
 doc/guides/cryptodevs/scheduler.rst    | 15 +++++++++++++++
 doc/guides/rel_notes/release_17_05.rst |  5 +++++
 2 files changed, 20 insertions(+)

diff --git a/doc/guides/cryptodevs/scheduler.rst b/doc/guides/cryptodevs/scheduler.rst
index 70fb62e..af54daf 100644
--- a/doc/guides/cryptodevs/scheduler.rst
+++ b/doc/guides/cryptodevs/scheduler.rst
@@ -126,3 +126,18 @@ operation:
    among its slaves in a round-robin manner. This mode may help to fill
    the throughput gap between the physical core and the existing cryptodevs
    to increase the overall performance.
+
+*   **CDEV_SCHED_MODE_PKT_SIZE_DISTR:**
+
+   Packet-size based distribution mode, which works with 2 slaves, the primary
+   slave and the secondary slave, and distributes the enqueued crypto
+   operations to them based on their data lengths. A crypto operation will be
+   distributed to the primary slave if its data length is equal to or bigger
+   than the designated threshold, otherwise it will be handled by the secondary
+   slave.
+
+   A typical usecase in this mode is with the QAT cryptodev as the primary and
+   a software cryptodev as the secondary slave. This may help applications to
+   process additional crypto workload than what the QAT cryptodev can handle on
+   its own, by making use of the available CPU cycles to deal with smaller
+   crypto workloads.
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index 2eecdec..ca44df3 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -55,6 +55,11 @@ New Features
 
   sPAPR IOMMU based pci probing enabled for vfio-pci devices.
 
+* **Added packet-size based distribution mode to Cryptodev Scheduler PMD.**
+
+  Packet-size based distribution mode is a scheduling mode that works with
+  2 slaves and distributes the enqueued crypto operations to them based on
+  their data lengths.
 
 Resolved Issues
 ---------------
-- 
2.7.4

[dpdk-dev] [PATCH v6 0/3] crypto/scheduler: add packet-base scheduling mode

[Fan Zhang]

Packet-size based distribution mode is a scheduling mode that works with
2 slaves, the primary slave and the secondary slave, and distributes the
enqueued crypto operations to them based on their data lengths. A crypto
operation will be distributed to the primary slave if its data length is
equal to or bigger than the designated threshold, otherwise it will be
handled by the secondary slave.

v6:
- Fixed index bug in the schedule_enqueue function

v5:
- Updated release notes
- Update enqueue and dequeue functions

v4:
- Polished documentation.
- Fixed documentation grammer errors.

v3:
- Uses 2 sched_ops array instead of one.
- Copy the failed-to-enqueue crypto ops back to the end of ops array.
- Dequeue_ordering will directly use schedule_dequeue function instead of
  excessive dequeue.

v2:
- Update with new reorder method.

Fan Zhang (3):
  crypto/scheduler: add packet size based mode code
  crypto/scheduler: enable packet size based scheduling mode
  doc: update cryptodev scheduler PMD documentation

 doc/guides/cryptodevs/scheduler.rst                |  15 +
 doc/guides/rel_notes/release_17_05.rst             |   5 +
 drivers/crypto/scheduler/Makefile                  |   1 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.c |   7 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.h |   3 +
 .../crypto/scheduler/scheduler_pkt_size_distr.c    | 420 +++++++++++++++++++++
 drivers/crypto/scheduler/scheduler_pmd_ops.c       |   2 +
 drivers/crypto/scheduler/scheduler_pmd_private.h   |   2 +
 8 files changed, 455 insertions(+)
 create mode 100644 drivers/crypto/scheduler/scheduler_pkt_size_distr.c

-- 
2.7.4

[dpdk-dev] [PATCH v6 1/3] crypto/scheduler: add packet size based mode code

[Fan Zhang]

This patch adds the packet size based distribution mode main source
file.

Packet-size based distribution mode is a scheduling mode works with 2
slaves, primary slave and secondary slave, and distribute the enqueued
crypto ops to them based on their data lengths. A crypto op will be
distributed to the primary slave if its data length equals or bigger
than the designated threshold, otherwise it will be handled by the
secondary slave.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
 .../crypto/scheduler/scheduler_pkt_size_distr.c    | 420 +++++++++++++++++++++
 1 file changed, 420 insertions(+)
 create mode 100644 drivers/crypto/scheduler/scheduler_pkt_size_distr.c

diff --git a/drivers/crypto/scheduler/scheduler_pkt_size_distr.c b/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
new file mode 100644
index 0000000..1066451
--- /dev/null
+++ b/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
@@ -0,0 +1,420 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_cryptodev.h>
+#include <rte_malloc.h>
+
+#include "rte_cryptodev_scheduler_operations.h"
+#include "scheduler_pmd_private.h"
+
+#define DEF_PKT_SIZE_THRESHOLD			(0xffffff80)
+#define SLAVE_IDX_SWITCH_MASK			(0x01)
+#define PRIMARY_SLAVE_IDX			0
+#define SECONDARY_SLAVE_IDX			1
+#define NB_PKT_SIZE_SLAVES			2
+
+/** pkt size based scheduler context */
+struct psd_scheduler_ctx {
+	uint32_t threshold;
+};
+
+/** pkt size based scheduler queue pair context */
+struct psd_scheduler_qp_ctx {
+	struct scheduler_slave primary_slave;
+	struct scheduler_slave secondary_slave;
+	uint32_t threshold;
+	uint32_t max_nb_objs;
+	uint8_t deq_idx;
+} __rte_cache_aligned;
+
+/** scheduling operation variables' wrapping */
+struct psd_schedule_op {
+	uint8_t slave_idx;
+	uint16_t pos;
+};
+
+static uint16_t
+schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
+{
+	struct psd_scheduler_qp_ctx *qp_ctx =
+			((struct scheduler_qp_ctx *)qp)->private_qp_ctx;
+	struct rte_crypto_op *sched_ops[NB_PKT_SIZE_SLAVES][nb_ops];
+	struct scheduler_session *sess;
+	uint32_t in_flight_ops[NB_PKT_SIZE_SLAVES] = {
+			qp_ctx->primary_slave.nb_inflight_cops,
+			qp_ctx->secondary_slave.nb_inflight_cops
+	};
+	struct psd_schedule_op enq_ops[NB_PKT_SIZE_SLAVES] = {
+		{PRIMARY_SLAVE_IDX, 0}, {SECONDARY_SLAVE_IDX, 0}
+	};
+	struct psd_schedule_op *p_enq_op;
+	uint16_t i, processed_ops_pri = 0, processed_ops_sec = 0;
+	uint32_t job_len;
+
+	if (unlikely(nb_ops == 0))
+		return 0;
+
+	for (i = 0; i < nb_ops && i < 4; i++) {
+		rte_prefetch0(ops[i]->sym);
+		rte_prefetch0(ops[i]->sym->session);
+	}
+
+	for (i = 0; (i < (nb_ops - 8)) && (nb_ops > 8); i += 4) {
+		rte_prefetch0(ops[i + 4]->sym);
+		rte_prefetch0(ops[i + 4]->sym->session);
+		rte_prefetch0(ops[i + 5]->sym);
+		rte_prefetch0(ops[i + 5]->sym->session);
+		rte_prefetch0(ops[i + 6]->sym);
+		rte_prefetch0(ops[i + 6]->sym->session);
+		rte_prefetch0(ops[i + 7]->sym);
+		rte_prefetch0(ops[i + 7]->sym->session);
+
+		sess = (struct scheduler_session *)
+				ops[i]->sym->session->_private;
+		/* job_len is initialized as cipher data length, once
+		 * it is 0, equals to auth data length
+		 */
+		job_len = ops[i]->sym->cipher.data.length;
+		job_len += (ops[i]->sym->cipher.data.length == 0) *
+				ops[i]->sym->auth.data.length;
+		/* decide the target op based on the job length */
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+
+		/* stop schedule cops before the queue is full, this shall
+		 * prevent the failed enqueue
+		 */
+		if (p_enq_op->pos + in_flight_ops[p_enq_op->slave_idx] ==
+				qp_ctx->max_nb_objs) {
+			i = nb_ops;
+			break;
+		}
+
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i];
+		ops[i]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		sess = (struct scheduler_session *)
+				ops[i+1]->sym->session->_private;
+		job_len = ops[i+1]->sym->cipher.data.length;
+		job_len += (ops[i+1]->sym->cipher.data.length == 0) *
+				ops[i+1]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+
+		if (p_enq_op->pos + in_flight_ops[p_enq_op->slave_idx] ==
+				qp_ctx->max_nb_objs) {
+			i = nb_ops;
+			break;
+		}
+
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i+1];
+		ops[i+1]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		sess = (struct scheduler_session *)
+				ops[i+2]->sym->session->_private;
+		job_len = ops[i+2]->sym->cipher.data.length;
+		job_len += (ops[i+2]->sym->cipher.data.length == 0) *
+				ops[i+2]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+
+		if (p_enq_op->pos + in_flight_ops[p_enq_op->slave_idx] ==
+				qp_ctx->max_nb_objs) {
+			i = nb_ops;
+			break;
+		}
+
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i+2];
+		ops[i+2]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+
+		sess = (struct scheduler_session *)
+				ops[i+3]->sym->session->_private;
+
+		job_len = ops[i+3]->sym->cipher.data.length;
+		job_len += (ops[i+3]->sym->cipher.data.length == 0) *
+				ops[i+3]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+
+		if (p_enq_op->pos + in_flight_ops[p_enq_op->slave_idx] ==
+				qp_ctx->max_nb_objs) {
+			i = nb_ops;
+			break;
+		}
+
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i+3];
+		ops[i+3]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+	}
+
+	for (; i < nb_ops; i++) {
+		sess = (struct scheduler_session *)
+				ops[i]->sym->session->_private;
+
+		job_len = ops[i]->sym->cipher.data.length;
+		job_len += (ops[i]->sym->cipher.data.length == 0) *
+				ops[i]->sym->auth.data.length;
+		p_enq_op = &enq_ops[!(job_len & qp_ctx->threshold)];
+
+		if (p_enq_op->pos + in_flight_ops[p_enq_op->slave_idx] ==
+				qp_ctx->max_nb_objs) {
+			i = nb_ops;
+			break;
+		}
+
+		sched_ops[p_enq_op->slave_idx][p_enq_op->pos] = ops[i];
+		ops[i]->sym->session = sess->sessions[p_enq_op->slave_idx];
+		p_enq_op->pos++;
+	}
+
+	processed_ops_pri = rte_cryptodev_enqueue_burst(
+			qp_ctx->primary_slave.dev_id,
+			qp_ctx->primary_slave.qp_id,
+			sched_ops[PRIMARY_SLAVE_IDX],
+			enq_ops[PRIMARY_SLAVE_IDX].pos);
+	/* enqueue shall not fail as the slave queue is monitored */
+	RTE_ASSERT(processed_ops_pri == enq_ops[PRIMARY_SLAVE_IDX].pos);
+
+	qp_ctx->primary_slave.nb_inflight_cops += processed_ops_pri;
+
+	processed_ops_sec = rte_cryptodev_enqueue_burst(
+			qp_ctx->secondary_slave.dev_id,
+			qp_ctx->secondary_slave.qp_id,
+			sched_ops[SECONDARY_SLAVE_IDX],
+			enq_ops[SECONDARY_SLAVE_IDX].pos);
+	RTE_ASSERT(processed_ops_sec == enq_ops[SECONDARY_SLAVE_IDX].pos);
+
+	qp_ctx->secondary_slave.nb_inflight_cops += processed_ops_sec;
+
+	return processed_ops_pri + processed_ops_sec;
+}
+
+static uint16_t
+schedule_enqueue_ordering(void *qp, struct rte_crypto_op **ops,
+		uint16_t nb_ops)
+{
+	struct rte_ring *order_ring =
+			((struct scheduler_qp_ctx *)qp)->order_ring;
+	uint16_t nb_ops_to_enq = get_max_enqueue_order_count(order_ring,
+			nb_ops);
+	uint16_t nb_ops_enqd = schedule_enqueue(qp, ops,
+			nb_ops_to_enq);
+
+	scheduler_order_insert(order_ring, ops, nb_ops_enqd);
+
+	return nb_ops_enqd;
+}
+
+static uint16_t
+schedule_dequeue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
+{
+	struct psd_scheduler_qp_ctx *qp_ctx =
+			((struct scheduler_qp_ctx *)qp)->private_qp_ctx;
+	struct scheduler_slave *slaves[NB_PKT_SIZE_SLAVES] = {
+			&qp_ctx->primary_slave, &qp_ctx->secondary_slave};
+	struct scheduler_slave *slave = slaves[qp_ctx->deq_idx];
+	uint16_t nb_deq_ops_pri = 0, nb_deq_ops_sec = 0;
+
+	if (slave->nb_inflight_cops) {
+		nb_deq_ops_pri = rte_cryptodev_dequeue_burst(slave->dev_id,
+			slave->qp_id, ops, nb_ops);
+		slave->nb_inflight_cops -= nb_deq_ops_pri;
+	}
+
+	qp_ctx->deq_idx = (~qp_ctx->deq_idx) & SLAVE_IDX_SWITCH_MASK;
+
+	if (nb_deq_ops_pri == nb_ops)
+		return nb_deq_ops_pri;
+
+	slave = slaves[qp_ctx->deq_idx];
+
+	if (slave->nb_inflight_cops) {
+		nb_deq_ops_sec = rte_cryptodev_dequeue_burst(slave->dev_id,
+				slave->qp_id, &ops[nb_deq_ops_pri],
+				nb_ops - nb_deq_ops_pri);
+		slave->nb_inflight_cops -= nb_deq_ops_sec;
+
+		if (!slave->nb_inflight_cops)
+			qp_ctx->deq_idx = (~qp_ctx->deq_idx) &
+					SLAVE_IDX_SWITCH_MASK;
+	}
+
+	return nb_deq_ops_pri + nb_deq_ops_sec;
+}
+
+static uint16_t
+schedule_dequeue_ordering(void *qp, struct rte_crypto_op **ops,
+		uint16_t nb_ops)
+{
+	struct rte_ring *order_ring =
+			((struct scheduler_qp_ctx *)qp)->order_ring;
+
+	schedule_dequeue(qp, ops, nb_ops);
+
+	return scheduler_order_drain(order_ring, ops, nb_ops);
+}
+
+static int
+slave_attach(__rte_unused struct rte_cryptodev *dev,
+		__rte_unused uint8_t slave_id)
+{
+	return 0;
+}
+
+static int
+slave_detach(__rte_unused struct rte_cryptodev *dev,
+		__rte_unused uint8_t slave_id)
+{
+	return 0;
+}
+
+static int
+scheduler_start(struct rte_cryptodev *dev)
+{
+	struct scheduler_ctx *sched_ctx = dev->data->dev_private;
+	struct psd_scheduler_ctx *psd_ctx = sched_ctx->private_ctx;
+	uint16_t i;
+
+	/* for packet size based scheduler, nb_slaves have to >= 2 */
+	if (sched_ctx->nb_slaves < NB_PKT_SIZE_SLAVES) {
+		CS_LOG_ERR("not enough slaves to start");
+		return -1;
+	}
+
+	for (i = 0; i < dev->data->nb_queue_pairs; i++) {
+		struct scheduler_qp_ctx *qp_ctx = dev->data->queue_pairs[i];
+		struct psd_scheduler_qp_ctx *ps_qp_ctx =
+				qp_ctx->private_qp_ctx;
+
+		ps_qp_ctx->primary_slave.dev_id =
+				sched_ctx->slaves[PRIMARY_SLAVE_IDX].dev_id;
+		ps_qp_ctx->primary_slave.qp_id = i;
+		ps_qp_ctx->primary_slave.nb_inflight_cops = 0;
+
+		ps_qp_ctx->secondary_slave.dev_id =
+				sched_ctx->slaves[SECONDARY_SLAVE_IDX].dev_id;
+		ps_qp_ctx->secondary_slave.qp_id = i;
+		ps_qp_ctx->secondary_slave.nb_inflight_cops = 0;
+
+		ps_qp_ctx->threshold = psd_ctx->threshold;
+
+		ps_qp_ctx->max_nb_objs = sched_ctx->qp_conf.nb_descriptors;
+	}
+
+	if (sched_ctx->reordering_enabled) {
+		dev->enqueue_burst = &schedule_enqueue_ordering;
+		dev->dequeue_burst = &schedule_dequeue_ordering;
+	} else {
+		dev->enqueue_burst = &schedule_enqueue;
+		dev->dequeue_burst = &schedule_dequeue;
+	}
+
+	return 0;
+}
+
+static int
+scheduler_stop(struct rte_cryptodev *dev)
+{
+	uint16_t i;
+
+	for (i = 0; i < dev->data->nb_queue_pairs; i++) {
+		struct scheduler_qp_ctx *qp_ctx = dev->data->queue_pairs[i];
+		struct psd_scheduler_qp_ctx *ps_qp_ctx = qp_ctx->private_qp_ctx;
+
+		if (ps_qp_ctx->primary_slave.nb_inflight_cops +
+				ps_qp_ctx->secondary_slave.nb_inflight_cops) {
+			CS_LOG_ERR("Some crypto ops left in slave queue");
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static int
+scheduler_config_qp(struct rte_cryptodev *dev, uint16_t qp_id)
+{
+	struct scheduler_qp_ctx *qp_ctx = dev->data->queue_pairs[qp_id];
+	struct psd_scheduler_qp_ctx *ps_qp_ctx;
+
+	ps_qp_ctx = rte_zmalloc_socket(NULL, sizeof(*ps_qp_ctx), 0,
+			rte_socket_id());
+	if (!ps_qp_ctx) {
+		CS_LOG_ERR("failed allocate memory for private queue pair");
+		return -ENOMEM;
+	}
+
+	qp_ctx->private_qp_ctx = (void *)ps_qp_ctx;
+
+	return 0;
+}
+
+static int
+scheduler_create_private_ctx(struct rte_cryptodev *dev)
+{
+	struct scheduler_ctx *sched_ctx = dev->data->dev_private;
+	struct psd_scheduler_ctx *psd_ctx;
+
+	if (sched_ctx->private_ctx)
+		rte_free(sched_ctx->private_ctx);
+
+	psd_ctx = rte_zmalloc_socket(NULL, sizeof(struct psd_scheduler_ctx), 0,
+			rte_socket_id());
+	if (!psd_ctx) {
+		CS_LOG_ERR("failed allocate memory");
+		return -ENOMEM;
+	}
+
+	psd_ctx->threshold = DEF_PKT_SIZE_THRESHOLD;
+
+	sched_ctx->private_ctx = (void *)psd_ctx;
+
+	return 0;
+}
+
+struct rte_cryptodev_scheduler_ops scheduler_ps_ops = {
+	slave_attach,
+	slave_detach,
+	scheduler_start,
+	scheduler_stop,
+	scheduler_config_qp,
+	scheduler_create_private_ctx,
+};
+
+struct rte_cryptodev_scheduler psd_scheduler = {
+		.name = "packet-size-based-scheduler",
+		.description = "scheduler which will distribute crypto op "
+				"burst based on the packet size",
+		.mode = CDEV_SCHED_MODE_PKT_SIZE_DISTR,
+		.ops = &scheduler_ps_ops
+};
+
+struct rte_cryptodev_scheduler *pkt_size_based_distr_scheduler = &psd_scheduler;
-- 
2.7.4

Re: [dpdk-dev] [PATCH v6 1/3] crypto/scheduler: add packet size based mode code

[Declan Doherty]

On 30/03/17 11:47, Fan Zhang wrote:
> This patch adds the packet size based distribution mode main source
> file.
>
> Packet-size based distribution mode is a scheduling mode works with 2
> slaves, primary slave and secondary slave, and distribute the enqueued
> crypto ops to them based on their data lengths. A crypto op will be
> distributed to the primary slave if its data length equals or bigger
> than the designated threshold, otherwise it will be handled by the
> secondary slave.
>
> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
> ---
...
>

Acked-by: Declan Doherty <declan.doherty@intel.com>

[dpdk-dev] [PATCH v6 2/3] crypto/scheduler: enable packet size based scheduling mode

[Fan Zhang]

This patch enables the packet size based scheduling mode in scheduler PMD.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
 drivers/crypto/scheduler/Makefile                  | 1 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.c | 7 +++++++
 drivers/crypto/scheduler/rte_cryptodev_scheduler.h | 3 +++
 drivers/crypto/scheduler/scheduler_pmd_ops.c       | 2 ++
 drivers/crypto/scheduler/scheduler_pmd_private.h   | 2 ++
 5 files changed, 15 insertions(+)

diff --git a/drivers/crypto/scheduler/Makefile b/drivers/crypto/scheduler/Makefile
index 187d3b6..0d51b1d 100644
--- a/drivers/crypto/scheduler/Makefile
+++ b/drivers/crypto/scheduler/Makefile
@@ -54,5 +54,6 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pmd.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pmd_ops.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += rte_cryptodev_scheduler.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_roundrobin.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler_pkt_size_distr.c
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/crypto/scheduler/rte_cryptodev_scheduler.c b/drivers/crypto/scheduler/rte_cryptodev_scheduler.c
index 2f49ad4..6a944fd 100644
--- a/drivers/crypto/scheduler/rte_cryptodev_scheduler.c
+++ b/drivers/crypto/scheduler/rte_cryptodev_scheduler.c
@@ -336,6 +336,13 @@ rte_crpytodev_scheduler_mode_set(uint8_t scheduler_id,
 			return -1;
 		}
 		break;
+	case CDEV_SCHED_MODE_PKT_SIZE_DISTR:
+		if (rte_cryptodev_scheduler_load_user_scheduler(scheduler_id,
+				pkt_size_based_distr_scheduler) < 0) {
+			CS_LOG_ERR("Failed to load scheduler");
+			return -1;
+		}
+		break;
 	default:
 		CS_LOG_ERR("Not yet supported");
 		return -ENOTSUP;
diff --git a/drivers/crypto/scheduler/rte_cryptodev_scheduler.h b/drivers/crypto/scheduler/rte_cryptodev_scheduler.h
index 98ab8f2..ddbd305 100644
--- a/drivers/crypto/scheduler/rte_cryptodev_scheduler.h
+++ b/drivers/crypto/scheduler/rte_cryptodev_scheduler.h
@@ -47,6 +47,8 @@ enum rte_cryptodev_scheduler_mode {
 	CDEV_SCHED_MODE_NOT_SET = 0,
 	CDEV_SCHED_MODE_USERDEFINED,
 	CDEV_SCHED_MODE_ROUNDROBIN,
+	/** packet-size based distribution mode */
+	CDEV_SCHED_MODE_PKT_SIZE_DISTR,
 
 	CDEV_SCHED_MODE_COUNT /* number of modes */
 };
@@ -158,6 +160,7 @@ struct rte_cryptodev_scheduler {
 };
 
 extern struct rte_cryptodev_scheduler *roundrobin_scheduler;
+extern struct rte_cryptodev_scheduler *pkt_size_based_distr_scheduler;
 
 #ifdef __cplusplus
 }
diff --git a/drivers/crypto/scheduler/scheduler_pmd_ops.c b/drivers/crypto/scheduler/scheduler_pmd_ops.c
index 968b4fb..f02506c 100644
--- a/drivers/crypto/scheduler/scheduler_pmd_ops.c
+++ b/drivers/crypto/scheduler/scheduler_pmd_ops.c
@@ -367,6 +367,8 @@ scheduler_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
 			return ret;
 	}
 
+	sched_ctx->qp_conf.nb_descriptors = qp_conf->nb_descriptors;
+
 	/* Allocate the queue pair data structure. */
 	qp_ctx = rte_zmalloc_socket(name, sizeof(*qp_ctx), RTE_CACHE_LINE_SIZE,
 			socket_id);
diff --git a/drivers/crypto/scheduler/scheduler_pmd_private.h b/drivers/crypto/scheduler/scheduler_pmd_private.h
index a7406f5..2feb3d1 100644
--- a/drivers/crypto/scheduler/scheduler_pmd_private.h
+++ b/drivers/crypto/scheduler/scheduler_pmd_private.h
@@ -89,6 +89,8 @@ struct scheduler_ctx {
 
 	uint8_t reordering_enabled;
 
+	struct rte_cryptodev_qp_conf qp_conf;
+
 	char name[RTE_CRYPTODEV_SCHEDULER_NAME_MAX_LEN];
 	char description[RTE_CRYPTODEV_SCHEDULER_DESC_MAX_LEN];
 } __rte_cache_aligned;
-- 
2.7.4

Re: [dpdk-dev] [PATCH v6 2/3] crypto/scheduler: enable packet size based scheduling mode

[Declan Doherty]

On 30/03/17 11:47, Fan Zhang wrote:
> This patch enables the packet size based scheduling mode in scheduler PMD.
>
> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
> ---
...
>

Acked-by: Declan Doherty <declan.doherty@intel.com>

[dpdk-dev] [PATCH v6 3/3] doc: update cryptodev scheduler PMD documentation

[Fan Zhang]

This patch updates packet size based scheduling mode description.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
 doc/guides/cryptodevs/scheduler.rst    | 15 +++++++++++++++
 doc/guides/rel_notes/release_17_05.rst |  5 +++++
 2 files changed, 20 insertions(+)

diff --git a/doc/guides/cryptodevs/scheduler.rst b/doc/guides/cryptodevs/scheduler.rst
index 70fb62e..af54daf 100644
--- a/doc/guides/cryptodevs/scheduler.rst
+++ b/doc/guides/cryptodevs/scheduler.rst
@@ -126,3 +126,18 @@ operation:
    among its slaves in a round-robin manner. This mode may help to fill
    the throughput gap between the physical core and the existing cryptodevs
    to increase the overall performance.
+
+*   **CDEV_SCHED_MODE_PKT_SIZE_DISTR:**
+
+   Packet-size based distribution mode, which works with 2 slaves, the primary
+   slave and the secondary slave, and distributes the enqueued crypto
+   operations to them based on their data lengths. A crypto operation will be
+   distributed to the primary slave if its data length is equal to or bigger
+   than the designated threshold, otherwise it will be handled by the secondary
+   slave.
+
+   A typical usecase in this mode is with the QAT cryptodev as the primary and
+   a software cryptodev as the secondary slave. This may help applications to
+   process additional crypto workload than what the QAT cryptodev can handle on
+   its own, by making use of the available CPU cycles to deal with smaller
+   crypto workloads.
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index 2eecdec..ca44df3 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -55,6 +55,11 @@ New Features
 
   sPAPR IOMMU based pci probing enabled for vfio-pci devices.
 
+* **Added packet-size based distribution mode to Cryptodev Scheduler PMD.**
+
+  Packet-size based distribution mode is a scheduling mode that works with
+  2 slaves and distributes the enqueued crypto operations to them based on
+  their data lengths.
 
 Resolved Issues
 ---------------
-- 
2.7.4

Re: [dpdk-dev] [PATCH v6 3/3] doc: update cryptodev scheduler PMD documentation

[Declan Doherty]

On 30/03/17 11:47, Fan Zhang wrote:
> This patch updates packet size based scheduling mode description.
>
> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
> ---
...
>

Acked-by: Declan Doherty <declan.doherty@intel.com>

Re: [dpdk-dev] [PATCH v6 0/3] crypto/scheduler: add packet-base scheduling mode

[De Lara Guarch, Pablo]

> -----Original Message-----
> From: Zhang, Roy Fan
> Sent: Thursday, March 30, 2017 11:47 AM
> To: dev@dpdk.org
> Cc: De Lara Guarch, Pablo; Gonzalez Monroy, Sergio; Doherty, Declan
> Subject: [PATCH v6 0/3] crypto/scheduler: add packet-base scheduling
> mode
> 
> Packet-size based distribution mode is a scheduling mode that works with
> 2 slaves, the primary slave and the secondary slave, and distributes the
> enqueued crypto operations to them based on their data lengths. A crypto
> operation will be distributed to the primary slave if its data length is
> equal to or bigger than the designated threshold, otherwise it will be
> handled by the secondary slave.

...
> 2.7.4

Applied to dpdk-next-crypto as a single patch.
Thanks,

Pablo

[dpdk-dev] [PATCH v4 0/3] crypto/scheduler: add fail-over mode

[Fan Zhang]

This patch adds fail-over mode for cryptodev scheduler PMD. Fail-over mode
works with 2 slaves, the primary slave and the secondary slave. In this
mode, the scheduler will enqueues the incoming crypto operation burst to the
primary slave. When one or more crypto operations fail to be enqueued, then
they will be enqueued to the secondary slave.

v4:
- Polished documentation.
- Fixed documentation grammer errors.

v3:
- More detailed commit messages.
- Removed device flush.
- Updated dequeue_ordering function

v2:
- Update with new reorder method

Fan Zhang (3):
  crypto/scheduler: add fail-over scheduling mode file
  crypto/scheduler: enable fail-over scheduling mode
  doc: update cryptodev scheduler PMD documentation

 doc/guides/cryptodevs/scheduler.rst                |   8 +
 drivers/crypto/scheduler/Makefile                  |   1 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.c |   7 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.h |   3 +
 drivers/crypto/scheduler/scheduler_failover.c      | 285 +++++++++++++++++++++
 5 files changed, 304 insertions(+)
 create mode 100644 drivers/crypto/scheduler/scheduler_failover.c

-- 
2.7.4

[dpdk-dev] [PATCH v5 0/3] crypto/scheduler: add fail-over mode

[Fan Zhang]

This patch adds fail-over mode for cryptodev scheduler PMD. Fail-over mode
works with 2 slaves, the primary slave and the secondary slave. In this
mode, the scheduler will enqueues the incoming crypto operation burst to the
primary slave. When one or more crypto operations fail to be enqueued, then
they will be enqueued to the secondary slave.

v5:
- Updated release note.

v4:
- Polished documentation.
- Fixed documentation grammer errors.

v3:
- More detailed commit messages.
- Removed device flush.
- Updated dequeue_ordering function

v2:
- Update with new reorder method

Fan Zhang (3):
  crypto/scheduler: add fail-over scheduling mode file
  crypto/scheduler: enable fail-over scheduling mode
  doc: update cryptodev scheduler PMD documentation

 doc/guides/cryptodevs/scheduler.rst                |   8 +
 doc/guides/rel_notes/release_17_05.rst             |   7 +
 drivers/crypto/scheduler/Makefile                  |   1 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.c |   7 +
 drivers/crypto/scheduler/rte_cryptodev_scheduler.h |   3 +
 drivers/crypto/scheduler/scheduler_failover.c      | 285 +++++++++++++++++++++
 6 files changed, 311 insertions(+)
 create mode 100644 drivers/crypto/scheduler/scheduler_failover.c

-- 
2.7.4

[dpdk-dev] [PATCH v5 3/3] doc: update cryptodev scheduler PMD documentation

[Fan Zhang]

This patch updates fail-over scheduling mode description.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
 doc/guides/cryptodevs/scheduler.rst    | 8 ++++++++
 doc/guides/rel_notes/release_17_05.rst | 7 +++++++
 2 files changed, 15 insertions(+)

diff --git a/doc/guides/cryptodevs/scheduler.rst b/doc/guides/cryptodevs/scheduler.rst
index 70fb62e..9f6c477 100644
--- a/doc/guides/cryptodevs/scheduler.rst
+++ b/doc/guides/cryptodevs/scheduler.rst
@@ -126,3 +126,11 @@ operation:
    among its slaves in a round-robin manner. This mode may help to fill
    the throughput gap between the physical core and the existing cryptodevs
    to increase the overall performance.
+
+*   **CDEV_SCHED_MODE_FAILOVER:**
+
+   Fail-over mode, which works with 2 slaves, the primary slave and the
+   secondary slave. In this mode, the scheduler will enqueue the incoming
+   crypto operation burst to the primary slave. When one or more crypto
+   operations fail to be enqueued, then they will be enqueued to the secondary
+   slave.
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index 918f483..741f37c 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -49,6 +49,13 @@ New Features
 
   sPAPR IOMMU based pci probing enabled for vfio-pci devices.
 
+* **Added fail-over mode to Cryptodev Scheduler PMD.**
+
+  Fail-over mode is a scheduling mode that works with 2 slaves.In this mode,
+  the scheduler will enqueue the incoming crypto operation burst to the
+  primary slave. When one or more crypto operations fail to be enqueued,
+  then they will be enqueued to the secondary slave.
+
 Resolved Issues
 ---------------
 
-- 
2.7.4

Re: [dpdk-dev] [PATCH v5 3/3] doc: update cryptodev scheduler PMD documentation

[Declan Doherty]

On 29/03/2017 5:31 PM, Fan Zhang wrote:
> This patch updates fail-over scheduling mode description.
>
> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
> ---
...
>

Acked-by: Declan Doherty <declan.doherty@intel.com>