From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga11.intel.com (mga11.intel.com [192.55.52.93]) by dpdk.org (Postfix) with ESMTP id F0776BD34 for ; Thu, 30 Mar 2017 18:32:46 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=intel.com; i=@intel.com; q=dns/txt; s=intel; t=1490891567; x=1522427567; h=from:to:cc:subject:date:message-id:in-reply-to: references; bh=fxZLFL51StSAJWLp38mxH+dRYRBoX3XVVCfGj5iU8CI=; b=KOoHd+FceWTxAKO12AvB3CPSTEE5qa/+7a1AAsQ5iYX4/EyysAon7e2g s/QKRwLNRRmRKN6KYtypcxZN1k1G9A==; Received: from fmsmga004.fm.intel.com ([10.253.24.48]) by fmsmga102.fm.intel.com with ESMTP/TLS/DHE-RSA-AES256-GCM-SHA384; 30 Mar 2017 09:32:46 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.36,247,1486454400"; d="scan'208";a="242117433" Received: from sivswdev02.ir.intel.com (HELO localhost.localdomain) ([10.237.217.46]) by fmsmga004.fm.intel.com with ESMTP; 30 Mar 2017 09:32:44 -0700 From: Wenzhuo Lu To: dev@dpdk.org Cc: Wenzhuo Lu Date: Thu, 30 Mar 2017 17:32:41 +0100 Message-Id: <1490891561-9596-1-git-send-email-wenzhuo.lu@intel.com> X-Mailer: git-send-email 1.7.0.7 In-Reply-To: <1490858773-100734-1-git-send-email-wenzhuo.lu@intel.com> References: <1490858773-100734-1-git-send-email-wenzhuo.lu@intel.com> Subject: [dpdk-dev] [PATCH v2] doc: add doc to show how to use VF daemon X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 30 Mar 2017 16:32:48 -0000 VFd (the VF daemon) is a mechanism which can be used to configure features on a VF without direct access to the PF. Signed-off-by: Wenzhuo Lu Acked-by: John McNamara --- V2: Some grammar and formatting fixes. doc/guides/howto/img/vf_daemon_overview.svg | 440 ++++++++++++++++++++++++++++ doc/guides/howto/index.rst | 1 + doc/guides/howto/vfd.rst | 407 +++++++++++++++++++++++++ 3 files changed, 848 insertions(+) create mode 100644 doc/guides/howto/img/vf_daemon_overview.svg create mode 100644 doc/guides/howto/vfd.rst diff --git a/doc/guides/howto/img/vf_daemon_overview.svg b/doc/guides/howto/img/vf_daemon_overview.svg new file mode 100644 index 0000000..2b3493c --- /dev/null +++ b/doc/guides/howto/img/vf_daemon_overview.svg @@ -0,0 +1,440 @@ + + + + + +image/svg+xmlSimple Double Arrow.14VM +VF Application +DPDK +Virtual ethdev +VF driver +Simple Double Arrow.14Simple Double Arrow.14Host +PF Application +DPDK +Ethdev +PF driver + diff --git a/doc/guides/howto/index.rst b/doc/guides/howto/index.rst index 737d0f9..a483444 100644 --- a/doc/guides/howto/index.rst +++ b/doc/guides/howto/index.rst @@ -39,5 +39,6 @@ HowTo Guides lm_virtio_vhost_user flow_bifurcation pvp_reference_benchmark + vfd virtio_user_for_container_networking virtio_user_as_exceptional_path diff --git a/doc/guides/howto/vfd.rst b/doc/guides/howto/vfd.rst new file mode 100644 index 0000000..6f083b8 --- /dev/null +++ b/doc/guides/howto/vfd.rst @@ -0,0 +1,407 @@ +.. BSD LICENSE + Copyright(c) 2017 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +VF daemon (VFd) +=============== + +VFd (the VF daemon) is a mechanism which can be used to configure features on +a VF (SR-IOV Virtual Function) without direct access to the PF (SR-IOV +Physical Function). VFd is an *EXPERIMENTAL* feature which can only be used in +the scenario of DPDK PF with a DPDK VF. If the PF port is driven by the Linux +kernel driver then the VFd feature will not work. Currently VFd is only +supported by the ixgbe and i40e drivers. + +In general VF features cannot be configured directly by an end user +application since they are under the control of the PF. The normal approach to +configuring a feature on a VF is that an application would call the APIs +provided by the VF driver. If the required feature cannot be configured by the +VF directly (the most common case) the VF sends a message to the PF through +the mailbox on ixgbe and i40e. This means that the availability of the feature +depends on whether the appropriate mailbox messages are defined. + +DPDK leverages the mailbox interface defined by the Linux kernel driver so +that compatibility with the kernel driver can be guaranteed. The downside of +this approach is that the availability of messages supported by the kernel +become a limitation when the user wants to configure features on the VF. + +VFd is a new method of controlling the features on a VF. The VF driver doesn't +talk directly to the PF driver when configuring a feature on the VF. When a VF +application (i.e., an application using the VF ports) wants to enable a VF +feature, it can send a message to the PF application (i.e., the application +using the PF port, which can be the same as the VF application). The PF +application will configure the feature for the VF. Obviously, the PF +application can also configure the VF features without a request from the VF +application. + +.. _VF_daemon_overview: + +.. figure:: img/vf_daemon_overview.* + + VF daemon (VFd) Overview + +Compared with the traditional approach the VFd moves the negotiation between +VF and PF from the driver level to application level. So the application +should define how the negotiation between the VF and PF works, or even if the +control should be limited to the PF. + +It is the application's responsibility to use VFd. Consider for example a KVM +migration, the VF application may transfer from one VM to another. It is +recommended in this case that the PF control the VF features without +participation from the VF. Then the VF application has no capability to +configure the features. So the user doesn't need to define the interface +between the VF application and the PF application. The service provider should +take the control of all the features. + +The following sections describe the VFd functionality. + +.. Note:: + + Although VFd is supported by both ixgbe and i40e, please be aware that + since the hardware capability is different, the functions supported by + ixgbe and i40e are not the same. + + +Preparing +--------- + +VFd only can be used in the scenario of DPDK PF + DPDK VF. Users should bind +the PF port to ``igb_uio``, then create the VFs based on the DPDK PF host. + +The typical procedure to achieve this is as follows: + +#. Boot the system without iommu, or with ``iommu=pt``. + +#. Bind the PF port to ``igb_uio``, for example:: + + dpdk-devbind.py -b igb_uio 01:00.0 + +#. Create a Virtual Function:: + + echo 1 > /sys/bus/pci/devices/0000:01:00.0/max_vfs + +#. Start a VM with the new VF port bypassed to it. + +#. Run a DPDK application on the PF in the host:: + + testpmd -l 0-7 -n 4 -- -i --txqflags=0 + +#. Bind the VF port to ``igb_uio`` in the VM:: + + dpdk-devbind.py -b igb_uio 03:00.0 + +#. Run a DPDK application on the VF in the VM:: + + testpmd -l 0-7 -n 4 -- -i --txqflags=0 + + +Common functions of IXGBE and I40E +---------------------------------- + +The following sections show how to enable PF/VF functionality based on the +above testpmd setup. + + +TX loopback +~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to set TX loopback:: + + set tx loopback 0 on|off + +This sets whether the PF port and all the VF ports that belong to it are +allowed to send the packets to other virtual ports. + +Although it is a VFd function, it is the global setting for the whole +physical port. When using this function, the PF and all the VFs TX loopback +will be enabled/disabled. + + +VF MAC address setting +~~~~~~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to set the MAC address for a VF port:: + + set vf mac addr 0 0 A0:36:9F:7B:C3:51 + +This testpmd runtime command will change the MAC address of the VF port to +this new address. If any other addresses are set before, they will be +overwritten. + + +VF MAC anti-spoofing +~~~~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to enable/disable the MAC +anti-spoofing for a VF port:: + + set vf mac antispoof 0 0 on|off + +When enabling the MAC anti-spoofing, the port will not forward packets whose +source MAC address is not the same as the port. + + +VF VLAN anti-spoofing +~~~~~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to enable/disable the VLAN +anti-spoofing for a VF port:: + + set vf vlan antispoof 0 0 on|off + +When enabling the VLAN anti-spoofing, the port will not send packets whose +VLAN ID does not belong to VLAN IDs that this port can receive. + + +VF VLAN insertion +~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to set the VLAN insertion for a VF +port:: + + set vf vlan insert 0 0 1 + +When using this testpmd runtime command, an assigned VLAN ID can be inserted +to the transmitted packets by the hardware. + +The assigned VLAN ID can be 0. It means disabling the VLAN insertion. + + +VF VLAN stripping +~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to enable/disable the VLAN stripping +for a VF port:: + + set vf vlan stripq 0 0 on|off + +This testpmd runtime command is used to enable/disable the RX VLAN stripping +for a specific VF port. + + +VF VLAN filtering +~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to set the VLAN filtering for a VF +port:: + + rx_vlan add 1 port 0 vf 1 + rx_vlan rm 1 port 0 vf 1 + +These two testpmd runtime commands can be used to add or remove the VLAN +filter for several VF ports. When the VLAN filters are added only the packets +that have the assigned VLAN IDs can be received. Other packets will be dropped +by hardware. + + +The IXGBE specific VFd functions +-------------------------------- + +The functions in this section are specific to the ixgbe driver. + + +All queues drop +~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to enable/disable the all queues +drop:: + + set all queues drop on|off + +This is a global setting for the PF and all the VF ports of the physical port. + +Enabling the ``all queues drop`` feature means that when there is no available +descriptor for the received packets they are dropped. The ``all queues drop`` +feature should be enabled in SR-IOV mode to avoid one queue blocking others. + + +VF packet drop +~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to enable/disable the packet drop for +a specific VF:: + + set vf split drop 0 0 on|off + +This is a similar function as ``all queues drop``. The difference is that this +function is per VF setting and the previous function is a global setting. + + +VF rate limit +~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to all queues' rate limit for a +specific VF:: + + set port 0 vf 0 rate 10 queue_mask 1 + +This is a function to set the rate limit for all the queues in the +``queue_mask`` bitmap. It is not used to set the summary of the rate +limit. The rate limit of every queue will be set equally to the assigned rate +limit. + + +VF RX enabling +~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to enable/disable packet receiving for +a specific VF:: + + set port 0 vf 0 rx on|off + +This function can be used to stop/start packet receiving on a VF. + + +VF TX enabling +~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to enable/disable packet transmitting +for a specific VF:: + + set port 0 vf 0 tx on|off + +This function can be used to stop/start packet transmitting on a VF. + + +VF RX mode setting +~~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to set the RX mode for a specific VF:: + + set port 0 vf 0 rxmode AUPE|ROPE|BAM|MPE on|off + +This function can be used to enable/disable some RX modes on the VF, including: + +* If it accept untagged packets. +* If it accepts packets matching the MAC filters. +* If it accept MAC broadcast packets, +* If it enables MAC multicast promiscuous mode. + + +The I40E specific VFd functions +------------------------------- + +The functions in this section are specific to the i40e driver. + + +VF statistics +~~~~~~~~~~~~~ + +This provides an API to get the a specific VF's statistic from PF. + + +VF statistics resetting +~~~~~~~~~~~~~~~~~~~~~~~ + +This provides an API to rest the a specific VF's statistic from PF. + + +VF link status change notification +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This provide an API to let a specific VF know if the physical link status +changed. + +Normally if a VF received this notification, the driver should notify the +application to reset the VF port. + + +VF MAC broadcast setting +~~~~~~~~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to enable/disable MAC broadcast packet +receiving for a specific VF:: + + set vf broadcast 0 0 on|off + + +VF MAC multicast promiscuous mode +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to enable/disable MAC multicast +promiscuous mode for a specific VF:: + + set vf allmulti 0 0 on|off + + +VF MAC unicast promiscuous mode +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to enable/disable MAC unicast +promiscuous mode for a specific VF:: + + set vf promisc 0 0 on|off + + +VF max bandwidth +~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to set the TX maximum bandwidth for a +specific VF:: + + set vf tx max-bandwidth 0 0 2000 + +The maximum bandwidth is an absolute value in Mbps. + + +VF TC bandwidth allocation +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to set the TCs (traffic class) TX +bandwidth allocation for a specific VF:: + + set vf tc tx min-bandwidth 0 0 (20,20,20,40) + +The allocated bandwidth should be set for all the TCs. The allocated bandwidth +is a relative value as a percentage. The sum of all the bandwidth should +be 100. + + +VF TC max bandwidth +~~~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to set the TCs TX maximum bandwidth +for a specific VF:: + + set vf tc tx max-bandwidth 0 0 0 10000 + +The maximum bandwidth is an absolute value in Mbps. + + +TC strict priority scheduling +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Run a testpmd runtime command on the PF to enable/disable several TCs TX +strict priority scheduling:: + + set tx strict-link-priority 0 0x3 + +The 0 in the TC bitmap means disabling the strict priority scheduling for this +TC. To enable use a value of 1. -- 2.7.4