DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] doc: update bonding device name in prog guide
@ 2017-05-10 13:38 Herakliusz Lipiec
  2017-05-10 13:51 ` [dpdk-dev] [dpdk-stable] " Mcnamara, John
  0 siblings, 1 reply; 3+ messages in thread
From: Herakliusz Lipiec @ 2017-05-10 13:38 UTC (permalink / raw)
  To: declan.doherty; +Cc: dev, stable

Fixes: 35b09d76f89e ("doc: use corelist instead of coremask")
Fixes: 58c82067f1ae ("app/testpmd: use consistent vdev names")

Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
---
 doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst b/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst
index 73fefce..1ef231d 100644
--- a/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst
+++ b/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst
@@ -356,7 +356,7 @@ Using Link Bonding Devices from the EAL Command Line
 
 Link bonding devices can be created at application startup time using the
 ``--vdev`` EAL command line option. The device name must start with the
-net_bond prefix followed by numbers or letters. The name must be unique for
+net_bonding prefix followed by numbers or letters. The name must be unique for
 each device. Each device can have multiple options arranged in a comma
 separated list. Multiple devices definitions can be arranged by calling the
 ``--vdev`` option multiple times.
@@ -365,7 +365,7 @@ Device names and bonding options must be separated by commas as shown below:
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,bond_opt0=..,bond opt1=..'--vdev 'net_bond1,bond _opt0=..,bond_opt1=..'
+    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,bond_opt0=..,bond opt1=..'--vdev 'net_bonding1,bond _opt0=..,bond_opt1=..'
 
 Link Bonding EAL Options
 ^^^^^^^^^^^^^^^^^^^^^^^^
@@ -373,7 +373,7 @@ Link Bonding EAL Options
 There are multiple ways of definitions that can be assessed and combined as
 long as the following two rules are respected:
 
-*   A unique device name, in the format of net_bondX is provided,
+*   A unique device name, in the format of net_bondingX is provided,
     where X can be any combination of numbers and/or letters,
     and the name is no greater than 32 characters long.
 
@@ -465,22 +465,22 @@ Create a bonded device in round robin mode with two slaves specified by their PC
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00' -- --port-topology=chained
+    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00' -- --port-topology=chained
 
 Create a bonded device in round robin mode with two slaves specified by their PCI address and an overriding MAC address:
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00,mac=00:1e:67:1d:fd:1d' -- --port-topology=chained
+    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00,mac=00:1e:67:1d:fd:1d' -- --port-topology=chained
 
 Create a bonded device in active backup mode with two slaves specified, and a primary slave specified by their PCI addresses:
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,mode=1, slave=0000:00a:00.01,slave=0000:004:00.00,primary=0000:00a:00.01' -- --port-topology=chained
+    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,mode=1, slave=0000:00a:00.01,slave=0000:004:00.00,primary=0000:00a:00.01' -- --port-topology=chained
 
 Create a bonded device in balance mode with two slaves specified by their PCI addresses, and a transmission policy of layer 3 + 4 forwarding:
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,mode=2, slave=0000:00a:00.01,slave=0000:004:00.00,xmit_policy=l34' -- --port-topology=chained
+    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,mode=2, slave=0000:00a:00.01,slave=0000:004:00.00,xmit_policy=l34' -- --port-topology=chained
-- 
2.7.4

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2017-05-10 20:41 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-10 13:38 [dpdk-dev] [PATCH] doc: update bonding device name in prog guide Herakliusz Lipiec
2017-05-10 13:51 ` [dpdk-dev] [dpdk-stable] " Mcnamara, John
2017-05-10 20:41   ` Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).