From: "Charles (Chas) Williams" <ciwillia@brocade.com>
To: <dev@dpdk.org>
Cc: <yliu@fridaylinux.org>, <maxime.coquelin@redhat.com>,
"Charles (Chas) Williams" <ciwillia@brocade.com>
Subject: [dpdk-dev] [PATCH 1/2] net/virtio: do not re-enter clean up routines
Date: Mon, 17 Jul 2017 19:05:22 -0400 [thread overview]
Message-ID: <1500332723-10812-2-git-send-email-ciwillia@brocade.com> (raw)
In-Reply-To: <1500332723-10812-1-git-send-email-ciwillia@brocade.com>
.dev_uninit calls .dev_stop and .dev_close. The work that is done in
those routines doesn't need repeated. Use started and opened to track
the adapter's status.
Signed-off-by: Chas Williams <ciwillia@brocade.com>
---
drivers/net/virtio/virtio_ethdev.c | 15 ++++++++++++---
drivers/net/virtio/virtio_pci.h | 4 +++-
2 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 00a3122..eff0545 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -609,6 +609,10 @@ virtio_dev_close(struct rte_eth_dev *dev)
PMD_INIT_LOG(DEBUG, "virtio_dev_close");
+ if (!hw->opened)
+ return;
+ hw->opened = false;
+
/* reset the NIC */
if (dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC)
VTPCI_OPS(hw)->set_config_irq(hw, VIRTIO_MSI_NO_VECTOR);
@@ -1696,6 +1700,8 @@ virtio_dev_configure(struct rte_eth_dev *dev)
return -EBUSY;
}
+ hw->opened = true;
+
return 0;
}
@@ -1759,7 +1765,7 @@ virtio_dev_start(struct rte_eth_dev *dev)
VIRTQUEUE_DUMP(txvq->vq);
}
- hw->started = 1;
+ hw->started = true;
/* Initialize Link state */
virtio_dev_link_update(dev, 0);
@@ -1824,10 +1830,13 @@ virtio_dev_stop(struct rte_eth_dev *dev)
PMD_INIT_LOG(DEBUG, "stop");
+ if (!hw->started)
+ return;
+ hw->started = false;
+
if (intr_conf->lsc || intr_conf->rxq)
rte_intr_disable(dev->intr_handle);
- hw->started = 0;
memset(&link, 0, sizeof(link));
virtio_dev_atomic_write_link_status(dev, &link);
}
@@ -1844,7 +1853,7 @@ virtio_dev_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complet
link.link_duplex = ETH_LINK_FULL_DUPLEX;
link.link_speed = SPEED_10G;
- if (hw->started == 0) {
+ if (!hw->started) {
link.link_status = ETH_LINK_DOWN;
} else if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS)) {
PMD_INIT_LOG(DEBUG, "Get link status from hw");
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index 18caebd..65bad2d 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -35,6 +35,7 @@
#define _VIRTIO_PCI_H_
#include <stdint.h>
+#include <stdbool.h>
#include <rte_pci.h>
#include <rte_ethdev.h>
@@ -253,7 +254,7 @@ struct virtio_hw {
uint64_t req_guest_features;
uint64_t guest_features;
uint32_t max_queue_pairs;
- uint16_t started;
+ bool started;
uint16_t max_mtu;
uint16_t vtnet_hdr_size;
uint8_t vlan_strip;
@@ -268,6 +269,7 @@ struct virtio_hw {
struct virtio_pci_common_cfg *common_cfg;
struct virtio_net_config *dev_cfg;
void *virtio_user_dev;
+ bool opened;
struct virtqueue **vqs;
};
--
2.1.4
next prev parent reply other threads:[~2017-07-17 23:05 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-17 23:05 [dpdk-dev] [PATCH 0/2] Some small changes to net/virtio Charles (Chas) Williams
2017-07-17 23:05 ` Charles (Chas) Williams [this message]
2018-11-01 14:45 ` [dpdk-dev] [PATCH 1/2] net/virtio: do not re-enter clean up routines Luca Boccassi
2018-11-02 9:57 ` Maxime Coquelin
2018-11-02 11:03 ` Maxime Coquelin
2018-11-02 11:14 ` Luca Boccassi
2018-11-02 14:33 ` Ferruh Yigit
2018-11-02 15:19 ` Chas Williams
2018-11-02 16:48 ` Maxime Coquelin
2018-11-02 17:17 ` Ferruh Yigit
2017-07-17 23:05 ` [dpdk-dev] [PATCH 2/2] net/virtio: register/unregister intr handler on start/stop Charles (Chas) Williams
2017-07-18 11:50 ` [dpdk-dev] [PATCH 0/2] Some small changes to net/virtio Ferruh Yigit
2017-07-18 11:52 ` Charles (Chas) Williams
2018-08-15 13:51 ` Luca Boccassi
2018-08-27 13:41 ` Ferruh Yigit
2018-08-27 13:48 ` Ferruh Yigit
2018-08-27 14:52 ` Gavin Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500332723-10812-2-git-send-email-ciwillia@brocade.com \
--to=ciwillia@brocade.com \
--cc=dev@dpdk.org \
--cc=maxime.coquelin@redhat.com \
--cc=yliu@fridaylinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).