From: Konstantin Ananyev <konstantin.ananyev@intel.com>
To: dev@dpdk.org
To: dev@dpdk.org
Cc: Konstantin Ananyev <konstantin.ananyev@intel.com>
Subject: [dpdk-dev] [PATCH 1/2] test/test: introduce new test-case for rte_smp_mb()
Date: Fri, 1 Dec 2017 11:12:50 +0000 [thread overview]
Message-ID: <1512126771-27503-1-git-send-email-konstantin.ananyev@intel.com> (raw)
Simple functional test for rte_smp_mb() implementations.
Also when executed on a single lcore could be used as rough
estimation how many cycles particular implementation of rte_smp_mb()
might take.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
test/test/Makefile | 1 +
test/test/test_mb.c | 278 ++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 279 insertions(+)
create mode 100644 test/test/test_mb.c
diff --git a/test/test/Makefile b/test/test/Makefile
index bb54c9808..3134283a8 100644
--- a/test/test/Makefile
+++ b/test/test/Makefile
@@ -95,6 +95,7 @@ SRCS-y += test_spinlock.c
SRCS-y += test_memory.c
SRCS-y += test_memzone.c
SRCS-y += test_bitmap.c
+SRCS-y += test_mb.c
SRCS-y += test_ring.c
SRCS-y += test_ring_perf.c
diff --git a/test/test/test_mb.c b/test/test/test_mb.c
new file mode 100644
index 000000000..5526a0366
--- /dev/null
+++ b/test/test/test_mb.c
@@ -0,0 +1,278 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ /*
+ * This is a simple functional test for rte_smp_mb() implementation.
+ * I.E. make sure that LOAD and STORE operations that precede the
+ * rte_smp_mb() call are globally visible across the lcores
+ * before the the LOAD and STORE operations that follows it.
+ * The test uses simple implementation of Peterson's lock algorithm
+ * for two execution units to make sure that rte_smp_mb() prevents
+ * store-load reordering to happen.
+ * Also when executed on a single lcore could be used as a approxiamate
+ * estimation of number of cycles particular implementation of rte_smp_mb()
+ * will take.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <inttypes.h>
+
+#include <rte_memory.h>
+#include <rte_per_lcore.h>
+#include <rte_launch.h>
+#include <rte_atomic.h>
+#include <rte_eal.h>
+#include <rte_lcore.h>
+#include <rte_pause.h>
+#include <rte_random.h>
+#include <rte_cycles.h>
+#include <rte_vect.h>
+#include <rte_debug.h>
+
+#include "test.h"
+
+#define ADD_MAX 8
+#define ITER_MAX 0x1000000
+
+enum plock_use_type {
+ USE_MB,
+ USE_SMP_MB,
+ USE_NUM
+};
+
+struct plock {
+ volatile uint32_t flag[2];
+ volatile uint32_t victim;
+ enum plock_use_type utype;
+};
+
+struct plock_test {
+ struct plock lock;
+ uint32_t val;
+ uint32_t iter;
+};
+
+struct lcore_plock_test {
+ struct plock_test *pt[2];
+ uint32_t sum[2];
+ uint32_t iter;
+ uint32_t lc;
+};
+
+static inline void
+store_load_barrier(uint32_t utype)
+{
+ if (utype == USE_MB)
+ rte_mb();
+ else if (utype == USE_SMP_MB)
+ rte_smp_mb();
+ else
+ RTE_VERIFY(0);
+}
+
+static void
+plock_lock(struct plock *l, uint32_t self)
+{
+ uint32_t other;
+
+ other = self ^ 1;
+
+ l->flag[self] = 1;
+ l->victim = self;
+
+ store_load_barrier(l->utype);
+
+ while (l->flag[other] == 1 && l->victim == self)
+ rte_pause();
+}
+
+static void
+plock_unlock(struct plock *l, uint32_t self)
+{
+ rte_smp_wmb();
+ l->flag[self] = 0;
+}
+
+static void
+plock_reset(struct plock *l, enum plock_use_type utype)
+{
+ memset(l, 0, sizeof(*l));
+ l->utype = utype;
+}
+
+static void
+plock_add(struct plock_test *pt, uint32_t self, uint32_t n)
+{
+ plock_lock(&pt->lock, self);
+ pt->iter++;
+ pt->val += n;
+ plock_unlock(&pt->lock, self);
+}
+
+static int
+plock_test1_lcore(void *data)
+{
+ uint64_t tm;
+ uint32_t i, lc, ln, n;
+ struct lcore_plock_test *lpt;
+
+ lpt = data;
+ lc = rte_lcore_id();
+
+ for (ln = rte_lcore_count(); ln != 0 && lpt->lc != lc; lpt++, ln--)
+ ;
+
+ if (ln == 0) {
+ printf("%s(%u) error at init\n", __func__, lc);
+ return -1;
+ }
+
+ n = rte_rand() % ADD_MAX;
+ tm = rte_get_timer_cycles();
+
+ for (i = 0; i != lpt->iter; i++) {
+
+ plock_add(lpt->pt[0], 0, n);
+ plock_add(lpt->pt[1], 1, n);
+
+ lpt->sum[0] += n;
+ lpt->sum[1] += n;
+
+ n = (n + 1) % ADD_MAX;
+ }
+
+ tm = rte_get_timer_cycles() - tm;
+
+ printf("%s(%u): %u iterations finished, in %" PRIu64
+ " cycles, %#Lf cycles/iteration, "
+ "local sum={%u, %u}\n",
+ __func__, lc, i, tm, (long double)tm / i,
+ lpt->sum[0], lpt->sum[1]);
+ return 0;
+}
+
+static int
+plock_test(uint32_t iter, enum plock_use_type utype)
+{
+ int32_t rc;
+ uint32_t i, lc, n;
+ uint32_t *sum;
+ struct plock_test *pt;
+ struct lcore_plock_test *lpt;
+
+ n = rte_lcore_count();
+ pt = calloc(n + 1, sizeof(*pt));
+ lpt = calloc(n, sizeof(*lpt));
+ sum = calloc(n + 1, sizeof(*sum));
+
+ printf("%s(iter=%u, utype=%u) started on %u lcores\n",
+ __func__, iter, utype, n);
+
+ if (pt == NULL || lpt == NULL) {
+ printf("%s: failed to allocate memory for %u lcores\n",
+ __func__, n);
+ free(pt);
+ free(lpt);
+ free(sum);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i != n + 1; i++)
+ plock_reset(&pt[i].lock, utype);
+
+ i = 0;
+ RTE_LCORE_FOREACH(lc) {
+
+ lpt[i].lc = lc;
+ lpt[i].iter = iter;
+ lpt[i].pt[0] = pt + i;
+ lpt[i].pt[1] = pt + i + 1;
+ i++;
+ }
+
+ lpt[i - 1].pt[1] = pt;
+
+ for (i = 0; i != n; i++)
+ printf("lpt[%u]={lc=%u, pt={%p, %p},};\n",
+ i, lpt[i].lc, lpt[i].pt[0], lpt[i].pt[1]);
+
+
+ rte_eal_mp_remote_launch(plock_test1_lcore, lpt, CALL_MASTER);
+ rte_eal_mp_wait_lcore();
+
+ for (i = 0; i != n; i++) {
+ sum[i] += lpt[i].sum[0];
+ sum[i + 1] += lpt[i].sum[1];
+ }
+
+ sum[0] += sum[i];
+
+ rc = 0;
+ for (i = 0; i != n; i++) {
+ printf("%s: sum[%u]=%u, pt[%u].val=%u, pt[%u].iter=%u;\n",
+ __func__, i, sum[i], i, pt[i].val, i, pt[i].iter);
+ if (sum[i] != pt[i].val || 2 * iter != pt[i].iter) {
+ printf("error: local and shared sums don't much\n");
+ rc = -1;
+ }
+ }
+
+ free(pt);
+ free(lpt);
+ free(sum);
+
+ printf("%s(utype=%u) returns %d\n", __func__, utype, rc);
+ return rc;
+}
+
+static int
+test_mb(void)
+{
+ int32_t i, ret, rc[USE_NUM];
+
+ for (i = 0; i != RTE_DIM(rc); i++)
+ rc[i] = plock_test(ITER_MAX, i);
+
+ ret = 0;
+ for (i = 0; i != RTE_DIM(rc); i++) {
+ printf("%s for utype=%d %s\n",
+ __func__, i, rc[i] == 0 ? "passed" : "failed");
+ ret |= rc[i];
+ }
+
+ return ret;
+}
+
+REGISTER_TEST_COMMAND(mb_autotest, test_mb);
--
2.13.5
next reply other threads:[~2017-12-01 11:13 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-01 11:12 Konstantin Ananyev [this message]
2017-12-01 11:12 ` [dpdk-dev] [PATCH 2/2] eal/x86: Use lock-prefixed instructions to reduce cost of rte_smp_mb() Konstantin Ananyev
2017-12-01 18:04 ` Stephen Hemminger
2017-12-01 23:08 ` Ananyev, Konstantin
2018-03-08 21:15 ` Stephen Hemminger
2017-12-11 17:11 ` Bruce Richardson
2017-12-11 17:30 ` Ananyev, Konstantin
2017-12-18 15:34 ` [dpdk-dev] [PATCH v2 0/2] eal/x86: Optimize rte_smp_mb() and create a new test case for it Konstantin Ananyev
2017-12-18 15:34 ` [dpdk-dev] [PATCH v2 1/2] test/test: introduce new test-case for rte_smp_mb() Konstantin Ananyev
2018-01-12 17:23 ` Thomas Monjalon
2018-01-12 17:58 ` Ananyev, Konstantin
2018-01-13 13:54 ` Wiles, Keith
2018-01-13 13:54 ` Wiles, Keith
2018-01-15 15:04 ` [dpdk-dev] [PATCH v3 0/2] eal/x86: Optimize rte_smp_mb() and create a new test case for it Konstantin Ananyev
2018-01-15 15:04 ` [dpdk-dev] [PATCH v3 1/2] test/test: introduce new test-case for rte_smp_mb() Konstantin Ananyev
2018-01-16 0:16 ` Thomas Monjalon
2018-01-15 15:04 ` [dpdk-dev] [PATCH v3 2/2] eal/x86: Use lock-prefixed instructions to reduce cost of rte_smp_mb() Konstantin Ananyev
2018-01-15 15:09 ` Konstantin Ananyev
[not found] ` <8b05f533-d146-7f97-48f4-82ddcfc3613b@redhat.com>
2018-01-16 1:54 ` [dpdk-dev] Fwd: " Michael S. Tsirkin
2018-01-29 9:29 ` Ananyev, Konstantin
2018-01-29 17:29 ` Michael S. Tsirkin
2018-01-29 15:47 ` [dpdk-dev] " Thomas Monjalon
2018-01-30 19:33 ` Stephen Hemminger
2017-12-18 15:34 ` [dpdk-dev] [PATCH v2 " Konstantin Ananyev
2017-12-18 15:46 ` Bruce Richardson
2017-12-11 17:08 ` [dpdk-dev] [PATCH 1/2] test/test: introduce new test-case for rte_smp_mb() Bruce Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1512126771-27503-1-git-send-email-konstantin.ananyev@intel.com \
--to=konstantin.ananyev@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).