From: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
To: dev@dpdk.org
Cc: kirill.rybalchenko@intel.com, andrey.chilikin@intel.com,
beilei.xing@intel.com, jingjing.wu@intel.com
Subject: [dpdk-dev] [PATCH v2] net/i40e: do not turn on flexible payload on driver init
Date: Thu, 4 Jan 2018 17:45:06 +0000 [thread overview]
Message-ID: <1515087906-2893-1-git-send-email-kirill.rybalchenko@intel.com> (raw)
In-Reply-To: <1512142049-122930-1-git-send-email-kirill.rybalchenko@intel.com>
Function i40e_GLQF_reg_init() overwrites global register for
flexible payload, forcing extraction of first 16 bytes of
L2/L3/L4 payload to the field vector even if flexible payload
is not used by an application. Such unconditional turn on of
flexible payload effectively disables ability to use outer
IP Destination address for RSS/FDIR for tunnelled packets,
as flexible payload overwrites outer IP destination address
on the field vector.
Now flexible payload turned on only when flow director is
enabled and configured.
v1:
Global registers will be set only when payload is enabled.
They will be reset if payload is disabled or on port reset
(uninit).
v2:
dev_init and dev_close disable flexible payload by default.
Flexible payload enabled selectively, only if appropriate
PIT is set up. The same done for FDIR and for rte_flow API.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 29 ++++++++++++++++++-----------
drivers/net/i40e/i40e_ethdev.h | 1 +
drivers/net/i40e/i40e_fdir.c | 14 +++++++++++---
drivers/net/i40e/i40e_flow.c | 9 ++++++++-
4 files changed, 38 insertions(+), 15 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 811cc9f..b136120 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -701,17 +701,6 @@ RTE_PMD_REGISTER_KMOD_DEP(net_i40e, "* igb_uio | uio_pci_generic | vfio-pci");
static inline void i40e_GLQF_reg_init(struct i40e_hw *hw)
{
/*
- * Force global configuration for flexible payload
- * to the first 16 bytes of the corresponding L2/L3/L4 paylod.
- * This should be removed from code once proper
- * configuration API is added to avoid configuration conflicts
- * between ports of the same device.
- */
- I40E_WRITE_REG(hw, I40E_GLQF_ORT(33), 0x000000E0);
- I40E_WRITE_REG(hw, I40E_GLQF_ORT(34), 0x000000E3);
- I40E_WRITE_REG(hw, I40E_GLQF_ORT(35), 0x000000E6);
-
- /*
* Initialize registers for parsing packet type of QinQ
* This should be removed from code once proper
* configuration API is added to avoid configuration conflicts
@@ -1315,6 +1304,10 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
/* enable uio intr after callback register */
rte_intr_enable(intr_handle);
+
+ /* By default disable flexible payload in global configuration */
+ i40e_flex_payload_reg_set_default(hw);
+
/*
* Add an ethertype filter to drop all flow control frames transmitted
* from VSIs. By doing so, we stop VF from sending out PAUSE or PFC
@@ -1435,6 +1428,17 @@ i40e_rm_fdir_filter_list(struct i40e_pf *pf)
}
}
+void i40e_flex_payload_reg_set_default(struct i40e_hw *hw)
+{
+ /*
+ * Disable by default flexible payload
+ * for corresponding L2/L3/L4 layers.
+ */
+ I40E_WRITE_REG(hw, I40E_GLQF_ORT(33), 0x00000000);
+ I40E_WRITE_REG(hw, I40E_GLQF_ORT(34), 0x00000000);
+ I40E_WRITE_REG(hw, I40E_GLQF_ORT(35), 0x00000000);
+}
+
static int
eth_i40e_dev_uninit(struct rte_eth_dev *dev)
{
@@ -2222,6 +2226,9 @@ i40e_dev_close(struct rte_eth_dev *dev)
i40e_res_pool_destroy(&pf->qp_pool);
i40e_res_pool_destroy(&pf->msix_pool);
+ /* Disable flexible payload in global configuration */
+ i40e_flex_payload_reg_set_default(hw);
+
/* force a PF reset to clean anything leftover */
reg = I40E_READ_REG(hw, I40E_PFGEN_CTRL);
I40E_WRITE_REG(hw, I40E_PFGEN_CTRL,
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index cd67453..2919e0a 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -1198,6 +1198,7 @@ int i40e_dcb_init_configure(struct rte_eth_dev *dev, bool sw_dcb);
int i40e_flush_queue_region_all_conf(struct rte_eth_dev *dev,
struct i40e_hw *hw, struct i40e_pf *pf, uint16_t on);
void i40e_init_queue_region_conf(struct rte_eth_dev *dev);
+void i40e_flex_payload_reg_set_default(struct i40e_hw *hw);
#define I40E_DEV_TO_PCI(eth_dev) \
RTE_DEV_TO_PCI((eth_dev)->device)
diff --git a/drivers/net/i40e/i40e_fdir.c b/drivers/net/i40e/i40e_fdir.c
index 3d7170d..2d17944 100644
--- a/drivers/net/i40e/i40e_fdir.c
+++ b/drivers/net/i40e/i40e_fdir.c
@@ -534,7 +534,7 @@ i40e_set_flx_pld_cfg(struct i40e_pf *pf,
{
struct i40e_hw *hw = I40E_PF_TO_HW(pf);
struct i40e_fdir_flex_pit flex_pit[I40E_MAX_FLXPLD_FIED];
- uint32_t flx_pit;
+ uint32_t flx_pit, flx_ort;
uint16_t num, min_next_off; /* in words */
uint8_t field_idx = 0;
uint8_t layer_idx = 0;
@@ -548,9 +548,17 @@ i40e_set_flx_pld_cfg(struct i40e_pf *pf,
layer_idx = I40E_FLXPLD_L4_IDX;
memset(flex_pit, 0, sizeof(flex_pit));
- num = i40e_srcoff_to_flx_pit(cfg->src_offset, flex_pit);
+ num = RTE_MIN(i40e_srcoff_to_flx_pit(cfg->src_offset, flex_pit),
+ RTE_DIM(flex_pit));
- for (i = 0; i < RTE_MIN(num, RTE_DIM(flex_pit)); i++) {
+ if (num) {
+ flx_ort = (1 << I40E_GLQF_ORT_FLX_PAYLOAD_SHIFT) |
+ (num << I40E_GLQF_ORT_FIELD_CNT_SHIFT) |
+ (layer_idx * I40E_MAX_FLXPLD_FIED);
+ I40E_WRITE_REG(hw, I40E_GLQF_ORT(33 + layer_idx), flx_ort);
+ }
+
+ for (i = 0; i < num; i++) {
field_idx = layer_idx * I40E_MAX_FLXPLD_FIED + i;
/* record the info in fdir structure */
pf->fdir.flex_set[field_idx].src_offset =
diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c
index 7e4936e..5487fd0 100644
--- a/drivers/net/i40e/i40e_flow.c
+++ b/drivers/net/i40e/i40e_flow.c
@@ -2276,11 +2276,18 @@ i40e_flow_set_fdir_flex_pit(struct i40e_pf *pf,
uint8_t raw_id)
{
struct i40e_hw *hw = I40E_PF_TO_HW(pf);
- uint32_t flx_pit;
+ uint32_t flx_pit, flx_ort;
uint8_t field_idx;
uint16_t min_next_off = 0; /* in words */
uint8_t i;
+ if (raw_id) {
+ flx_ort = (1 << I40E_GLQF_ORT_FLX_PAYLOAD_SHIFT) |
+ (raw_id << I40E_GLQF_ORT_FIELD_CNT_SHIFT) |
+ (layer_idx * I40E_MAX_FLXPLD_FIED);
+ I40E_WRITE_REG(hw, I40E_GLQF_ORT(33 + layer_idx), flx_ort);
+ }
+
/* Set flex pit */
for (i = 0; i < raw_id; i++) {
field_idx = layer_idx * I40E_MAX_FLXPLD_FIED + i;
--
2.5.5
next prev parent reply other threads:[~2018-01-04 17:45 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-29 12:55 [dpdk-dev] [PATCH] " Kirill Rybalchenko
2017-11-30 9:17 ` Xing, Beilei
2017-12-01 15:27 ` Kirill Rybalchenko
2017-12-11 6:00 ` Xing, Beilei
2017-12-12 3:40 ` Xing, Beilei
2018-01-04 17:45 ` Kirill Rybalchenko [this message]
2018-01-08 5:41 ` [dpdk-dev] [PATCH v2] " Xing, Beilei
2018-01-09 15:28 ` Zhang, Helin
2018-01-09 15:36 ` [dpdk-dev] [PATCH v3] " Kirill Rybalchenko
2018-01-09 16:06 ` Zhang, Helin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515087906-2893-1-git-send-email-kirill.rybalchenko@intel.com \
--to=kirill.rybalchenko@intel.com \
--cc=andrey.chilikin@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).