From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>, <shreyansh.jain@nxp.com>,
Ashish Jain <ashish.jain@nxp.com>, <stable@dpdk.org>
Subject: [dpdk-dev] [PATCH v3 02/19] net/dpaa: fix the mbuf packet type if zero
Date: Wed, 10 Jan 2018 16:16:24 +0530 [thread overview]
Message-ID: <1515581201-29784-3-git-send-email-hemant.agrawal@nxp.com> (raw)
In-Reply-To: <1515581201-29784-1-git-send-email-hemant.agrawal@nxp.com>
From: Ashish Jain <ashish.jain@nxp.com>
Populate the mbuf field packet_type which is required
for calculating checksum while transmitting frames
Fixes: 8cffdcbe85aa ("net/dpaa: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
drivers/net/dpaa/dpaa_rxtx.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/net/dpaa/dpaa_rxtx.c b/drivers/net/dpaa/dpaa_rxtx.c
index c3a0920..630d7a5 100644
--- a/drivers/net/dpaa/dpaa_rxtx.c
+++ b/drivers/net/dpaa/dpaa_rxtx.c
@@ -32,6 +32,7 @@
#include <rte_ip.h>
#include <rte_tcp.h>
#include <rte_udp.h>
+#include <rte_net.h>
#include "dpaa_ethdev.h"
#include "dpaa_rxtx.h"
@@ -478,6 +479,15 @@ dpaa_eth_mbuf_to_sg_fd(struct rte_mbuf *mbuf,
fd->opaque_addr = 0;
if (mbuf->ol_flags & DPAA_TX_CKSUM_OFFLOAD_MASK) {
+ if (!mbuf->packet_type) {
+ struct rte_net_hdr_lens hdr_lens;
+
+ mbuf->packet_type = rte_net_get_ptype(mbuf, &hdr_lens,
+ RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK
+ | RTE_PTYPE_L4_MASK);
+ mbuf->l2_len = hdr_lens.l2_len;
+ mbuf->l3_len = hdr_lens.l3_len;
+ }
if (temp->data_off < DEFAULT_TX_ICEOF
+ sizeof(struct dpaa_eth_parse_results_t))
temp->data_off = DEFAULT_TX_ICEOF
@@ -585,6 +595,15 @@ tx_on_dpaa_pool_unsegmented(struct rte_mbuf *mbuf,
}
if (mbuf->ol_flags & DPAA_TX_CKSUM_OFFLOAD_MASK) {
+ if (!mbuf->packet_type) {
+ struct rte_net_hdr_lens hdr_lens;
+
+ mbuf->packet_type = rte_net_get_ptype(mbuf, &hdr_lens,
+ RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK
+ | RTE_PTYPE_L4_MASK);
+ mbuf->l2_len = hdr_lens.l2_len;
+ mbuf->l3_len = hdr_lens.l3_len;
+ }
if (mbuf->data_off < (DEFAULT_TX_ICEOF +
sizeof(struct dpaa_eth_parse_results_t))) {
DPAA_DP_LOG(DEBUG, "Checksum offload Err: "
--
2.7.4
next prev parent reply other threads:[~2018-01-10 10:47 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-13 12:05 [dpdk-dev] [PATCH 00/18] DPAA PMD improvements Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 01/18] net/dpaa: fix coverity reported issues Hemant Agrawal
2018-01-09 10:46 ` Ferruh Yigit
2018-01-09 13:29 ` Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 02/18] net/dpaa: fix the mbuf packet type if zero Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 03/18] net/dpaa: fix FW version code Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 04/18] bus/dpaa: update platform soc value register routines Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 05/18] net/dpaa: set the correct frame size in device MTU Hemant Agrawal
2018-01-09 10:46 ` Ferruh Yigit
2017-12-13 12:05 ` [dpdk-dev] [PATCH 06/18] net/dpaa: add frame count based tail drop with CGR Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 07/18] bus/dpaa: optimize the qman HW stashing settings Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 08/18] bus/dpaa: optimize the endianness conversions Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 09/18] bus/dpaa: add support to create dynamic HW portal Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 10/18] net/dpaa: change Tx HW budget to 7 Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 11/18] net/dpaa: optimize the Tx burst Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 12/18] net/dpaa: optimize Rx path Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 13/18] bus/dpaa: query queue frame count support Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 14/18] net/dpaa: add Rx queue " Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 15/18] net/dpaa: add support for loopback API Hemant Agrawal
2018-01-09 10:46 ` Ferruh Yigit
2017-12-13 12:05 ` [dpdk-dev] [PATCH 16/18] app/testpmd: add support for loopback config for dpaa Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 17/18] bus/dpaa: add support for static queues Hemant Agrawal
2018-01-09 10:46 ` Ferruh Yigit
2017-12-13 12:05 ` [dpdk-dev] [PATCH 18/18] net/dpaa: integrate the support of push mode in PMD Hemant Agrawal
2018-01-09 10:47 ` [dpdk-dev] [PATCH 00/18] DPAA PMD improvements Ferruh Yigit
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 " Hemant Agrawal
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 01/18] net/dpaa: fix the mbuf packet type if zero Hemant Agrawal
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 02/18] net/dpaa: fix FW version code Hemant Agrawal
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 03/18] bus/dpaa: update platform soc value register routines Hemant Agrawal
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 04/18] net/dpaa: set the correct frame size in device MTU Hemant Agrawal
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 05/18] net/dpaa: add frame count based tail drop with CGR Hemant Agrawal
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 06/18] bus/dpaa: optimize the qman HW stashing settings Hemant Agrawal
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 07/18] bus/dpaa: optimize the endianness conversions Hemant Agrawal
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 08/18] bus/dpaa: add support to create dynamic HW portal Hemant Agrawal
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 09/18] net/dpaa: change Tx HW budget to 7 Hemant Agrawal
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 10/18] net/dpaa: optimize the Tx burst Hemant Agrawal
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 11/18] net/dpaa: optimize Rx path Hemant Agrawal
2018-01-09 13:23 ` [dpdk-dev] [PATCH v2 12/18] bus/dpaa: query queue frame count support Hemant Agrawal
2018-01-09 13:23 ` [dpdk-dev] [PATCH v2 13/18] net/dpaa: add Rx queue " Hemant Agrawal
2018-01-09 13:23 ` [dpdk-dev] [PATCH v2 14/18] net/dpaa: add support for loopback API Hemant Agrawal
2018-01-09 13:23 ` [dpdk-dev] [PATCH v2 15/18] app/testpmd: add support for loopback config for dpaa Hemant Agrawal
2018-01-09 13:23 ` [dpdk-dev] [PATCH v2 16/18] bus/dpaa: add support for static queues Hemant Agrawal
2018-01-09 13:23 ` [dpdk-dev] [PATCH v2 17/18] net/dpaa: integrate the support of push mode in PMD Hemant Agrawal
2018-01-09 13:23 ` [dpdk-dev] [PATCH v2 18/18] bus/dpaa: support for enqueue frames of multiple queues Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 00/19 ]DPAA PMD improvements Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 01/19] net/dpaa: fix uninitialized and unused variables Hemant Agrawal
2018-01-10 10:46 ` Hemant Agrawal [this message]
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 03/19] net/dpaa: fix FW version code Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 04/19] bus/dpaa: update platform soc value register routines Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 05/19] net/dpaa: set the correct frame size in device MTU Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 06/19] net/dpaa: add frame count based tail drop with CGR Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 07/19] bus/dpaa: optimize the qman HW stashing settings Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 08/19] bus/dpaa: optimize the endianness conversions Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 09/19] bus/dpaa: add support to create dynamic HW portal Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 10/19] net/dpaa: change Tx HW budget to 7 Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 11/19] net/dpaa: optimize the Tx burst Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 12/19] net/dpaa: optimize Rx path Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 13/19] bus/dpaa: query queue frame count support Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 14/19] net/dpaa: add Rx queue " Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 15/19] net/dpaa: add support for loopback API Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 16/19] app/testpmd: add support for loopback config for dpaa Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 17/19] bus/dpaa: add support for static queues Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 18/19] net/dpaa: integrate the support of push mode in PMD Hemant Agrawal
2018-01-10 10:46 ` [dpdk-dev] [PATCH v3 19/19] bus/dpaa: support for enqueue frames of multiple queues Hemant Agrawal
2018-01-10 20:14 ` [dpdk-dev] [PATCH v3 00/19 ]DPAA PMD improvements Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515581201-29784-3-git-send-email-hemant.agrawal@nxp.com \
--to=hemant.agrawal@nxp.com \
--cc=ashish.jain@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=shreyansh.jain@nxp.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).