DPDK patches and discussions
 help / color / mirror / Atom feed
From: Andrew Rybchenko <arybchenko@solarflare.com>
To: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH 80/80] net/sfc/base: sync MCDI headers and TLV layout
Date: Tue, 20 Feb 2018 07:34:38 +0000	[thread overview]
Message-ID: <1519112078-20113-81-git-send-email-arybchenko@solarflare.com> (raw)
In-Reply-To: <1519112078-20113-1-git-send-email-arybchenko@solarflare.com>

Regenerate MCDI and TLV layout headers from firmwaresrc to
pick up DPDK firmware variant and related Rx queue and filtering
extensions.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
 drivers/net/sfc/base/ef10_tlv_layout.h |  67 ++--
 drivers/net/sfc/base/efx_regs_mcdi.h   | 699 ++++++++++++++++++++++++++++++++-
 2 files changed, 709 insertions(+), 57 deletions(-)

diff --git a/drivers/net/sfc/base/ef10_tlv_layout.h b/drivers/net/sfc/base/ef10_tlv_layout.h
index e94bc3e..b19dc2a 100644
--- a/drivers/net/sfc/base/ef10_tlv_layout.h
+++ b/drivers/net/sfc/base/ef10_tlv_layout.h
@@ -408,6 +408,7 @@ struct tlv_firmware_options {
 #define TLV_FIRMWARE_VARIANT_PACKED_STREAM_HASH_MODE_1 \
                                              MC_CMD_FW_PACKED_STREAM_HASH_MODE_1
 #define TLV_FIRMWARE_VARIANT_RULES_ENGINE    MC_CMD_FW_RULES_ENGINE
+#define TLV_FIRMWARE_VARIANT_DPDK            MC_CMD_FW_DPDK
 };
 
 /* Voltage settings
@@ -547,6 +548,17 @@ struct tlv_global_port_mode {
   uint32_t length;
   uint32_t port_mode;
 #define TLV_PORT_MODE_DEFAULT           (0xffffffff) /* Default for given platform */
+
+/* Huntington port modes */
+#define TLV_PORT_MODE_10G                        (0)
+#define TLV_PORT_MODE_40G                        (1)
+#define TLV_PORT_MODE_10G_10G                    (2)
+#define TLV_PORT_MODE_40G_40G                    (3)
+#define TLV_PORT_MODE_10G_10G_10G_10G            (4)
+#define TLV_PORT_MODE_40G_10G_10G                (6)
+#define TLV_PORT_MODE_10G_10G_40G                (7)
+
+/* Medford (and later) port modes */
 #define TLV_PORT_MODE_1x1_NA                     (0) /* Single 10G/25G on mdi0 */
 #define TLV_PORT_MODE_1x4_NA                     (1) /* Single 100G/40G on mdi0 */
 #define TLV_PORT_MODE_NA_1x4                     (22) /* Single 100G/40G on mdi1 */
@@ -554,8 +566,8 @@ struct tlv_global_port_mode {
 #define TLV_PORT_MODE_NA_1x2                     (11) /* Single 50G on mdi1 */
 #define TLV_PORT_MODE_1x1_1x1                    (2) /* Single 10G/25G on mdi0, single 10G/25G on mdi1 */
 #define TLV_PORT_MODE_1x4_1x4                    (3) /* Single 40G on mdi0, single 40G on mdi1 */
-#define TLV_PORT_MODE_2x1_2x1                    (4) /* Dual 10G/25G on mdi0, dual 10G/25G on mdi1 - WARNING: bug3720: On Newport only, this is actually Quad 10G on mdi0 */
-#define TLV_PORT_MODE_4x1_NA                     (5) /* Quad 10G/25G on mdi0 */
+#define TLV_PORT_MODE_2x1_2x1                    (5) /* Dual 10G/25G on mdi0, dual 10G/25G on mdi1 */
+#define TLV_PORT_MODE_4x1_NA                     (4) /* Quad 10G/25G on mdi0 */
 #define TLV_PORT_MODE_NA_4x1                     (8) /* Quad 10G/25G on mdi1 */
 #define TLV_PORT_MODE_1x4_2x1                    (6) /* Single 40G on mdi0, dual 10G/25G on mdi1 */
 #define TLV_PORT_MODE_2x1_1x4                    (7) /* Dual 10G/25G on mdi0, single 40G on mdi1 */
@@ -566,7 +578,13 @@ struct tlv_global_port_mode {
 #define TLV_PORT_MODE_1x2_1x4                    (16) /* Single 50G on mdi0, single 40G on mdi1 */
 #define TLV_PORT_MODE_1x2_2x1                    (17) /* Single 50G on mdi0, dual 10G/25G on mdi1 */
 #define TLV_PORT_MODE_2x1_1x2                    (18) /* Dual 10G/25G on mdi0, single 50G on mdi1 */
-/* Below modes are eftest only, to allow snapper explicit selection between multi-channel and LLPCS. In production, this selection is automatic and outside world should not care about LLPCS */
+
+/* Snapper-only Medford2 port modes.
+ * These modes are eftest only, to allow snapper explicit
+ * selection between multi-channel and LLPCS. In production,
+ * this selection is automatic and outside world should not
+ * care about LLPCS.
+ */
 #define TLV_PORT_MODE_2x1_2x1_LL                 (19) /* Dual 10G/25G on mdi0, dual 10G/25G on mdi1, low-latency PCS */
 #define TLV_PORT_MODE_4x1_NA_LL                  (20) /* Quad 10G/25G on mdi0, low-latency PCS */
 #define TLV_PORT_MODE_NA_4x1_LL                  (21) /* Quad 10G/25G on mdi1, low-latency PCS */
@@ -575,42 +593,13 @@ struct tlv_global_port_mode {
 #define TLV_PORT_MODE_BUG63720_DO_NOT_USE        (9) /* bug63720: Do not use */
 #define TLV_PORT_MODE_MAX TLV_PORT_MODE_1x1_1x1_LL
 
-/* Deprecated aliases */
-#define TLV_PORT_MODE_10G                        TLV_PORT_MODE_1x1_NA
-#define TLV_PORT_MODE_40G                        TLV_PORT_MODE_1x4_NA
-#define TLV_PORT_MODE_10G_10G                    TLV_PORT_MODE_1x1_1x1
-#define TLV_PORT_MODE_40G_40G                    TLV_PORT_MODE_1x4_1x4
-#define TLV_PORT_MODE_10G_10G_10G_10G            TLV_PORT_MODE_2x1_2x1
-#define TLV_PORT_MODE_10G_10G_10G_10G_Q1         TLV_PORT_MODE_2x1_2x1 /* bug63720: Do not use */
-#define TLV_PORT_MODE_10G_10G_10G_10G_Q          TLV_PORT_MODE_4x1_NA
-#define TLV_PORT_MODE_40G_10G_10G                TLV_PORT_MODE_1x4_2x1
-#define TLV_PORT_MODE_10G_10G_40G                TLV_PORT_MODE_2x1_1x4
-#define TLV_PORT_MODE_10G_10G_10G_10G_Q2         TLV_PORT_MODE_NA_4x1
-#define TLV_PORT_MODE_10G_10G_10G_10G_Q1_Q2      TLV_PORT_MODE_BUG63720_DO_NOT_USE /* bug63720: Do not use */
-#define TLV_PORT_MODE_25G                        TLV_PORT_MODE_1x1_NA     /* Single 25G on mdi0 */
-#define TLV_PORT_MODE_100G_Q1                    TLV_PORT_MODE_1x4_NA     /* Single 100G on mdi0 */
-#define TLV_PORT_MODE_100G_Q2                    TLV_PORT_MODE_NA_1x4     /* Single 100G on mdi1 */
-#define TLV_PORT_MODE_50G_Q1                     TLV_PORT_MODE_1x2_NA     /* Single 50G on mdi0 */
-#define TLV_PORT_MODE_50G_Q2                     TLV_PORT_MODE_NA_1x2     /* Single 50G on mdi1 */
-#define TLV_PORT_MODE_25G_25G                    TLV_PORT_MODE_1x1_1x1    /* Single 25G on mdi0, single 25G on mdi1 */
-#define TLV_PORT_MODE_25G_25G_25G_25G_Q1_Q2      TLV_PORT_MODE_2x1_2x1    /* Dual 25G on mdi0, dual 25G on mdi1 */
-#define TLV_PORT_MODE_25G_25G_25G_25G_Q1         TLV_PORT_MODE_4x1_NA     /* Quad 25G on mdi0 */
-#define TLV_PORT_MODE_25G_25G_25G_25G_Q2         TLV_PORT_MODE_NA_4x1     /* Quad 25G on mdi1 */
-#define TLV_PORT_MODE_40G_25G_25G                TLV_PORT_MODE_1x4_2x1    /* Single 40G on mdi0, dual 25G on mdi1 */
-#define TLV_PORT_MODE_25G_25G_40G                TLV_PORT_MODE_2x1_1x4    /* Dual 25G on mdi0, single 40G on mdi1 */
-#define TLV_PORT_MODE_50G_50G_Q1_Q2              TLV_PORT_MODE_1x2_1x2    /* Single 50G on mdi0, single 50G on mdi1 */
-#define TLV_PORT_MODE_50G_50G_Q1                 TLV_PORT_MODE_2x2_NA     /* Dual 50G on mdi0 */
-#define TLV_PORT_MODE_50G_50G_Q2                 TLV_PORT_MODE_NA_2x2     /* Dual 50G on mdi1 */
-#define TLV_PORT_MODE_40G_50G                    TLV_PORT_MODE_1x4_1x2    /* Single 40G on mdi0, single 50G on mdi1 */
-#define TLV_PORT_MODE_50G_40G                    TLV_PORT_MODE_1x2_1x4    /* Single 50G on mdi0, single 40G on mdi1 */
-#define TLV_PORT_MODE_50G_25G_25G                TLV_PORT_MODE_1x2_2x1    /* Single 50G on mdi0, dual 25G on mdi1 */
-#define TLV_PORT_MODE_25G_25G_50G                TLV_PORT_MODE_2x1_1x2    /* Dual 25G on mdi0, single 50G on mdi1 */
-/* eftest only, see comments for _LL modes above */
-#define TLV_PORT_MODE_25G_25G_25G_25G_Q1_Q2_LL   TLV_PORT_MODE_2x1_2x1_LL /* Dual 25G on mdi0, dual 25G on mdi1, low-latency PCS */
-#define TLV_PORT_MODE_25G_25G_25G_25G_Q1_LL      TLV_PORT_MODE_4x1_NA_LL  /* Quad 25G on mdi0, low-latency PCS */
-#define TLV_PORT_MODE_25G_25G_25G_25G_Q2_LL      TLV_PORT_MODE_NA_4x1_LL  /* Quad 25G on mdi1, low-latency PCS */
-#define TLV_PORT_MODE_25G_LL                     TLV_PORT_MODE_1x1_NA_LL  /* Single 10G/25G on mdi0, low-latency PCS */
-#define TLV_PORT_MODE_25G_25G_LL                 TLV_PORT_MODE_1x1_1x1_LL /* Single 10G/25G on mdi0, single 10G/25G on mdi1, low-latency PCS */
+/* Deprecated Medford aliases - DO NOT USE IN NEW CODE */
+#define TLV_PORT_MODE_10G_10G_10G_10G_Q          (5)
+#define TLV_PORT_MODE_10G_10G_10G_10G_Q1         (4)
+#define TLV_PORT_MODE_10G_10G_10G_10G_Q2         (8)
+#define TLV_PORT_MODE_10G_10G_10G_10G_Q1_Q2      (9)
+
+#define TLV_PORT_MODE_MAX TLV_PORT_MODE_1x1_1x1_LL
 };
 
 /* Type of the v-switch created implicitly by the firmware */
diff --git a/drivers/net/sfc/base/efx_regs_mcdi.h b/drivers/net/sfc/base/efx_regs_mcdi.h
index efddb1f..cb2c094 100644
--- a/drivers/net/sfc/base/efx_regs_mcdi.h
+++ b/drivers/net/sfc/base/efx_regs_mcdi.h
@@ -319,10 +319,17 @@
 #define SIENA_MC_BOOTROM_COPYCODE_VEC (0x800 - 3 * 0x4)
 #define HUNT_MC_BOOTROM_COPYCODE_VEC (0x8000 - 3 * 0x4)
 #define MEDFORD_MC_BOOTROM_COPYCODE_VEC (0x10000 - 3 * 0x4)
-/* Points to the recovery mode entry point. */
+/* Points to the recovery mode entry point. Misnamed but kept for compatibility. */
 #define SIENA_MC_BOOTROM_NOFLASH_VEC (0x800 - 2 * 0x4)
 #define HUNT_MC_BOOTROM_NOFLASH_VEC (0x8000 - 2 * 0x4)
 #define MEDFORD_MC_BOOTROM_NOFLASH_VEC (0x10000 - 2 * 0x4)
+/* Points to the recovery mode entry point. Same as above, but the right name. */
+#define SIENA_MC_BOOTROM_RECOVERY_VEC (0x800 - 2 * 0x4)
+#define HUNT_MC_BOOTROM_RECOVERY_VEC (0x8000 - 2 * 0x4)
+#define MEDFORD_MC_BOOTROM_RECOVERY_VEC (0x10000 - 2 * 0x4)
+
+/* Points to noflash mode entry point. */
+#define MEDFORD_MC_BOOTROM_REAL_NOFLASH_VEC (0x10000 - 4 * 0x4)
 
 /* The command set exported by the boot ROM (MCDI v0) */
 #define MC_CMD_GET_VERSION_V0_SUPPORTED_FUNCS {		\
@@ -395,6 +402,8 @@
 #define	MCDI_EVENT_LINKCHANGE_LP_CAP_WIDTH 16
 #define	MCDI_EVENT_LINKCHANGE_SPEED_LBN 16
 #define	MCDI_EVENT_LINKCHANGE_SPEED_WIDTH 4
+/* enum: Link is down or link speed could not be determined */
+#define	MCDI_EVENT_LINKCHANGE_SPEED_UNKNOWN  0x0
 /* enum: 100Mbs */
 #define	MCDI_EVENT_LINKCHANGE_SPEED_100M  0x1
 /* enum: 1Gbs */
@@ -2721,6 +2730,8 @@
  * support
  */
 #define	MC_CMD_FW_RULES_ENGINE 0x5
+/* enum: Prefer to use firmware with additional DPDK support */
+#define	MC_CMD_FW_DPDK 0x6
 /* enum: Only this option is allowed for non-admin functions */
 #define	MC_CMD_FW_DONT_CARE  0xffffffff
 
@@ -6694,6 +6705,12 @@
 #define	LICENSED_APP_ID_CAPTURE_SOLARSYSTEM_40G 0x800
 /* enum: Capture SolarSystem 1G */
 #define	LICENSED_APP_ID_CAPTURE_SOLARSYSTEM_1G  0x1000
+/* enum: ScaleOut Onload */
+#define	LICENSED_APP_ID_SCALEOUT_ONLOAD         0x2000
+/* enum: SCS Network Analytics Dashboard */
+#define	LICENSED_APP_ID_DSHBRD                  0x4000
+/* enum: SolarCapture Trading Analytics */
+#define	LICENSED_APP_ID_SCATRD                  0x8000
 #define	LICENSED_APP_ID_ID_LBN 0
 #define	LICENSED_APP_ID_ID_WIDTH 32
 
@@ -6760,6 +6777,12 @@
 #define	LICENSED_V3_APPS_CAPTURE_SOLARSYSTEM_40G_WIDTH 1
 #define	LICENSED_V3_APPS_CAPTURE_SOLARSYSTEM_1G_LBN 12
 #define	LICENSED_V3_APPS_CAPTURE_SOLARSYSTEM_1G_WIDTH 1
+#define	LICENSED_V3_APPS_SCALEOUT_ONLOAD_LBN 13
+#define	LICENSED_V3_APPS_SCALEOUT_ONLOAD_WIDTH 1
+#define	LICENSED_V3_APPS_DSHBRD_LBN 14
+#define	LICENSED_V3_APPS_DSHBRD_WIDTH 1
+#define	LICENSED_V3_APPS_SCATRD_LBN 15
+#define	LICENSED_V3_APPS_SCATRD_WIDTH 1
 #define	LICENSED_V3_APPS_MASK_LBN 0
 #define	LICENSED_V3_APPS_MASK_WIDTH 64
 
@@ -6810,6 +6833,14 @@
  * is the same as for TX_EV_COMPLETION.
  */
 #define	TX_TIMESTAMP_EVENT_TX_EV_CTPIO_COMPLETION  0x11
+/* enum: This is the low part of a TX timestamp for a CTPIO transmission. The
+ * event format is the same as for TX_EV_TSTAMP_LO
+ */
+#define	TX_TIMESTAMP_EVENT_TX_EV_CTPIO_TS_LO  0x12
+/* enum: This is the high part of a TX timestamp for a CTPIO transmission. The
+ * event format is the same as for TX_EV_TSTAMP_HI
+ */
+#define	TX_TIMESTAMP_EVENT_TX_EV_CTPIO_TS_HI  0x13
 /* enum: This is the low part of a TX timestamp event */
 #define	TX_TIMESTAMP_EVENT_TX_EV_TSTAMP_LO  0x51
 /* enum: This is the high part of a TX timestamp event */
@@ -7182,11 +7213,15 @@
 /* Size, in entries */
 #define	MC_CMD_INIT_RXQ_EXT_IN_SIZE_OFST 0
 #define	MC_CMD_INIT_RXQ_EXT_IN_SIZE_LEN 4
-/* The EVQ to send events to. This is an index originally specified to INIT_EVQ
+/* The EVQ to send events to. This is an index originally specified to
+ * INIT_EVQ. If DMA_MODE == PACKED_STREAM this must be equal to INSTANCE.
  */
 #define	MC_CMD_INIT_RXQ_EXT_IN_TARGET_EVQ_OFST 4
 #define	MC_CMD_INIT_RXQ_EXT_IN_TARGET_EVQ_LEN 4
-/* The value to put in the event data. Check hardware spec. for valid range. */
+/* The value to put in the event data. Check hardware spec. for valid range.
+ * This field is ignored if DMA_MODE == EQUAL_STRIDE_PACKED_STREAM or DMA_MODE
+ * == PACKED_STREAM.
+ */
 #define	MC_CMD_INIT_RXQ_EXT_IN_LABEL_OFST 8
 #define	MC_CMD_INIT_RXQ_EXT_IN_LABEL_LEN 4
 /* Desired instance. Must be set to a specific instance, which is a function
@@ -7217,6 +7252,13 @@
 #define	MC_CMD_INIT_RXQ_EXT_IN_SINGLE_PACKET  0x0
 /* enum: Pack multiple packets into large descriptors (for SolarCapture) */
 #define	MC_CMD_INIT_RXQ_EXT_IN_PACKED_STREAM  0x1
+/* enum: Pack multiple packets into large descriptors using the format designed
+ * to maximise packet rate. This mode uses 1 "bucket" per descriptor with
+ * multiple fixed-size packet buffers within each bucket. For a full
+ * description see SF-119419-TC. This mode is only supported by "dpdk" datapath
+ * firmware.
+ */
+#define	MC_CMD_INIT_RXQ_EXT_IN_EQUAL_STRIDE_PACKED_STREAM  0x2
 #define	MC_CMD_INIT_RXQ_EXT_IN_FLAG_SNAPSHOT_MODE_LBN 14
 #define	MC_CMD_INIT_RXQ_EXT_IN_FLAG_SNAPSHOT_MODE_WIDTH 1
 #define	MC_CMD_INIT_RXQ_EXT_IN_PACKED_STREAM_BUFF_SIZE_LBN 15
@@ -7246,12 +7288,122 @@
 #define	MC_CMD_INIT_RXQ_EXT_IN_SNAPSHOT_LENGTH_OFST 540
 #define	MC_CMD_INIT_RXQ_EXT_IN_SNAPSHOT_LENGTH_LEN 4
 
+/* MC_CMD_INIT_RXQ_V3_IN msgrequest */
+#define	MC_CMD_INIT_RXQ_V3_IN_LEN 560
+/* Size, in entries */
+#define	MC_CMD_INIT_RXQ_V3_IN_SIZE_OFST 0
+#define	MC_CMD_INIT_RXQ_V3_IN_SIZE_LEN 4
+/* The EVQ to send events to. This is an index originally specified to
+ * INIT_EVQ. If DMA_MODE == PACKED_STREAM this must be equal to INSTANCE.
+ */
+#define	MC_CMD_INIT_RXQ_V3_IN_TARGET_EVQ_OFST 4
+#define	MC_CMD_INIT_RXQ_V3_IN_TARGET_EVQ_LEN 4
+/* The value to put in the event data. Check hardware spec. for valid range.
+ * This field is ignored if DMA_MODE == EQUAL_STRIDE_PACKED_STREAM or DMA_MODE
+ * == PACKED_STREAM.
+ */
+#define	MC_CMD_INIT_RXQ_V3_IN_LABEL_OFST 8
+#define	MC_CMD_INIT_RXQ_V3_IN_LABEL_LEN 4
+/* Desired instance. Must be set to a specific instance, which is a function
+ * local queue index.
+ */
+#define	MC_CMD_INIT_RXQ_V3_IN_INSTANCE_OFST 12
+#define	MC_CMD_INIT_RXQ_V3_IN_INSTANCE_LEN 4
+/* There will be more flags here. */
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAGS_OFST 16
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAGS_LEN 4
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_BUFF_MODE_LBN 0
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_BUFF_MODE_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_HDR_SPLIT_LBN 1
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_HDR_SPLIT_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_TIMESTAMP_LBN 2
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_TIMESTAMP_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V3_IN_CRC_MODE_LBN 3
+#define	MC_CMD_INIT_RXQ_V3_IN_CRC_MODE_WIDTH 4
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_CHAIN_LBN 7
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_CHAIN_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_PREFIX_LBN 8
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_PREFIX_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_DISABLE_SCATTER_LBN 9
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_DISABLE_SCATTER_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V3_IN_DMA_MODE_LBN 10
+#define	MC_CMD_INIT_RXQ_V3_IN_DMA_MODE_WIDTH 4
+/* enum: One packet per descriptor (for normal networking) */
+#define	MC_CMD_INIT_RXQ_V3_IN_SINGLE_PACKET  0x0
+/* enum: Pack multiple packets into large descriptors (for SolarCapture) */
+#define	MC_CMD_INIT_RXQ_V3_IN_PACKED_STREAM  0x1
+/* enum: Pack multiple packets into large descriptors using the format designed
+ * to maximise packet rate. This mode uses 1 "bucket" per descriptor with
+ * multiple fixed-size packet buffers within each bucket. For a full
+ * description see SF-119419-TC. This mode is only supported by "dpdk" datapath
+ * firmware.
+ */
+#define	MC_CMD_INIT_RXQ_V3_IN_EQUAL_STRIDE_PACKED_STREAM  0x2
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_SNAPSHOT_MODE_LBN 14
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_SNAPSHOT_MODE_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V3_IN_PACKED_STREAM_BUFF_SIZE_LBN 15
+#define	MC_CMD_INIT_RXQ_V3_IN_PACKED_STREAM_BUFF_SIZE_WIDTH 3
+#define	MC_CMD_INIT_RXQ_V3_IN_PS_BUFF_1M  0x0 /* enum */
+#define	MC_CMD_INIT_RXQ_V3_IN_PS_BUFF_512K  0x1 /* enum */
+#define	MC_CMD_INIT_RXQ_V3_IN_PS_BUFF_256K  0x2 /* enum */
+#define	MC_CMD_INIT_RXQ_V3_IN_PS_BUFF_128K  0x3 /* enum */
+#define	MC_CMD_INIT_RXQ_V3_IN_PS_BUFF_64K  0x4 /* enum */
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_WANT_OUTER_CLASSES_LBN 18
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_WANT_OUTER_CLASSES_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_FORCE_EV_MERGING_LBN 19
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_FORCE_EV_MERGING_WIDTH 1
+/* Owner ID to use if in buffer mode (zero if physical) */
+#define	MC_CMD_INIT_RXQ_V3_IN_OWNER_ID_OFST 20
+#define	MC_CMD_INIT_RXQ_V3_IN_OWNER_ID_LEN 4
+/* The port ID associated with the v-adaptor which should contain this DMAQ. */
+#define	MC_CMD_INIT_RXQ_V3_IN_PORT_ID_OFST 24
+#define	MC_CMD_INIT_RXQ_V3_IN_PORT_ID_LEN 4
+/* 64-bit address of 4k of 4k-aligned host memory buffer */
+#define	MC_CMD_INIT_RXQ_V3_IN_DMA_ADDR_OFST 28
+#define	MC_CMD_INIT_RXQ_V3_IN_DMA_ADDR_LEN 8
+#define	MC_CMD_INIT_RXQ_V3_IN_DMA_ADDR_LO_OFST 28
+#define	MC_CMD_INIT_RXQ_V3_IN_DMA_ADDR_HI_OFST 32
+#define	MC_CMD_INIT_RXQ_V3_IN_DMA_ADDR_NUM 64
+/* Maximum length of packet to receive, if SNAPSHOT_MODE flag is set */
+#define	MC_CMD_INIT_RXQ_V3_IN_SNAPSHOT_LENGTH_OFST 540
+#define	MC_CMD_INIT_RXQ_V3_IN_SNAPSHOT_LENGTH_LEN 4
+/* The number of packet buffers that will be contained within each
+ * EQUAL_STRIDE_PACKED_STREAM format bucket supplied by the driver. This field
+ * is ignored unless DMA_MODE == EQUAL_STRIDE_PACKED_STREAM.
+ */
+#define	MC_CMD_INIT_RXQ_V3_IN_ES_PACKET_BUFFERS_PER_BUCKET_OFST 544
+#define	MC_CMD_INIT_RXQ_V3_IN_ES_PACKET_BUFFERS_PER_BUCKET_LEN 4
+/* The length in bytes of the area in each packet buffer that can be written to
+ * by the adapter. This is used to store the packet prefix and the packet
+ * payload. This length does not include any end padding added by the driver.
+ * This field is ignored unless DMA_MODE == EQUAL_STRIDE_PACKED_STREAM.
+ */
+#define	MC_CMD_INIT_RXQ_V3_IN_ES_MAX_DMA_LEN_OFST 548
+#define	MC_CMD_INIT_RXQ_V3_IN_ES_MAX_DMA_LEN_LEN 4
+/* The length in bytes of a single packet buffer within a
+ * EQUAL_STRIDE_PACKED_STREAM format bucket. This field is ignored unless
+ * DMA_MODE == EQUAL_STRIDE_PACKED_STREAM.
+ */
+#define	MC_CMD_INIT_RXQ_V3_IN_ES_PACKET_STRIDE_OFST 552
+#define	MC_CMD_INIT_RXQ_V3_IN_ES_PACKET_STRIDE_LEN 4
+/* The maximum time in nanoseconds that the datapath will be backpressured if
+ * there are no RX descriptors available. If the timeout is reached and there
+ * are still no descriptors then the packet will be dropped. A timeout of 0
+ * means the datapath will never be blocked. This field is ignored unless
+ * DMA_MODE == EQUAL_STRIDE_PACKED_STREAM.
+ */
+#define	MC_CMD_INIT_RXQ_V3_IN_ES_HEAD_OF_LINE_BLOCK_TIMEOUT_OFST 556
+#define	MC_CMD_INIT_RXQ_V3_IN_ES_HEAD_OF_LINE_BLOCK_TIMEOUT_LEN 4
+
 /* MC_CMD_INIT_RXQ_OUT msgresponse */
 #define	MC_CMD_INIT_RXQ_OUT_LEN 0
 
 /* MC_CMD_INIT_RXQ_EXT_OUT msgresponse */
 #define	MC_CMD_INIT_RXQ_EXT_OUT_LEN 0
 
+/* MC_CMD_INIT_RXQ_V3_OUT msgresponse */
+#define	MC_CMD_INIT_RXQ_V3_OUT_LEN 0
+
 
 /***********************************/
 /* MC_CMD_INIT_TXQ
@@ -8168,6 +8320,273 @@
 #define	MC_CMD_FILTER_OP_EXT_IN_IFRM_DST_IP_OFST 156
 #define	MC_CMD_FILTER_OP_EXT_IN_IFRM_DST_IP_LEN 16
 
+/* MC_CMD_FILTER_OP_V3_IN msgrequest: FILTER_OP extension to support additional
+ * filter actions for Intel's DPDK (Data Plane Development Kit, dpdk.org) via
+ * its rte_flow API. This extension is only useful with the sfc_efx driver
+ * included as part of DPDK, used in conjunction with the dpdk datapath
+ * firmware variant.
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_LEN 180
+/* identifies the type of operation requested */
+#define	MC_CMD_FILTER_OP_V3_IN_OP_OFST 0
+#define	MC_CMD_FILTER_OP_V3_IN_OP_LEN 4
+/*            Enum values, see field(s): */
+/*               MC_CMD_FILTER_OP_IN/OP */
+/* filter handle (for remove / unsubscribe operations) */
+#define	MC_CMD_FILTER_OP_V3_IN_HANDLE_OFST 4
+#define	MC_CMD_FILTER_OP_V3_IN_HANDLE_LEN 8
+#define	MC_CMD_FILTER_OP_V3_IN_HANDLE_LO_OFST 4
+#define	MC_CMD_FILTER_OP_V3_IN_HANDLE_HI_OFST 8
+/* The port ID associated with the v-adaptor which should contain this filter.
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_PORT_ID_OFST 12
+#define	MC_CMD_FILTER_OP_V3_IN_PORT_ID_LEN 4
+/* fields to include in match criteria */
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_FIELDS_OFST 16
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_FIELDS_LEN 4
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_SRC_IP_LBN 0
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_SRC_IP_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_DST_IP_LBN 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_DST_IP_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_SRC_MAC_LBN 2
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_SRC_MAC_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_SRC_PORT_LBN 3
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_SRC_PORT_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_DST_MAC_LBN 4
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_DST_MAC_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_DST_PORT_LBN 5
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_DST_PORT_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_ETHER_TYPE_LBN 6
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_ETHER_TYPE_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_INNER_VLAN_LBN 7
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_INNER_VLAN_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_OUTER_VLAN_LBN 8
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_OUTER_VLAN_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IP_PROTO_LBN 9
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IP_PROTO_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_FWDEF0_LBN 10
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_FWDEF0_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_VNI_OR_VSID_LBN 11
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_VNI_OR_VSID_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_SRC_IP_LBN 12
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_SRC_IP_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_DST_IP_LBN 13
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_DST_IP_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_SRC_MAC_LBN 14
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_SRC_MAC_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_SRC_PORT_LBN 15
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_SRC_PORT_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_DST_MAC_LBN 16
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_DST_MAC_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_DST_PORT_LBN 17
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_DST_PORT_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_ETHER_TYPE_LBN 18
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_ETHER_TYPE_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_INNER_VLAN_LBN 19
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_INNER_VLAN_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_OUTER_VLAN_LBN 20
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_OUTER_VLAN_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_IP_PROTO_LBN 21
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_IP_PROTO_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_FWDEF0_LBN 22
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_FWDEF0_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_FWDEF1_LBN 23
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_FWDEF1_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_UNKNOWN_MCAST_DST_LBN 24
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_UNKNOWN_MCAST_DST_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_UNKNOWN_UCAST_DST_LBN 25
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_IFRM_UNKNOWN_UCAST_DST_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_UNKNOWN_MCAST_DST_LBN 30
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_UNKNOWN_MCAST_DST_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_UNKNOWN_UCAST_DST_LBN 31
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_UNKNOWN_UCAST_DST_WIDTH 1
+/* receive destination */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_DEST_OFST 20
+#define	MC_CMD_FILTER_OP_V3_IN_RX_DEST_LEN 4
+/* enum: drop packets */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_DEST_DROP  0x0
+/* enum: receive to host */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_DEST_HOST  0x1
+/* enum: receive to MC */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_DEST_MC  0x2
+/* enum: loop back to TXDP 0 */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_DEST_TX0  0x3
+/* enum: loop back to TXDP 1 */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_DEST_TX1  0x4
+/* receive queue handle (for multiple queue modes, this is the base queue) */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_QUEUE_OFST 24
+#define	MC_CMD_FILTER_OP_V3_IN_RX_QUEUE_LEN 4
+/* receive mode */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_MODE_OFST 28
+#define	MC_CMD_FILTER_OP_V3_IN_RX_MODE_LEN 4
+/* enum: receive to just the specified queue */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_MODE_SIMPLE  0x0
+/* enum: receive to multiple queues using RSS context */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_MODE_RSS  0x1
+/* enum: receive to multiple queues using .1p mapping */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_MODE_DOT1P_MAPPING  0x2
+/* enum: install a filter entry that will never match; for test purposes only
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_MODE_TEST_NEVER_MATCH  0x80000000
+/* RSS context (for RX_MODE_RSS) or .1p mapping handle (for
+ * RX_MODE_DOT1P_MAPPING), as returned by MC_CMD_RSS_CONTEXT_ALLOC or
+ * MC_CMD_DOT1P_MAPPING_ALLOC.
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_RX_CONTEXT_OFST 32
+#define	MC_CMD_FILTER_OP_V3_IN_RX_CONTEXT_LEN 4
+/* transmit domain (reserved; set to 0) */
+#define	MC_CMD_FILTER_OP_V3_IN_TX_DOMAIN_OFST 36
+#define	MC_CMD_FILTER_OP_V3_IN_TX_DOMAIN_LEN 4
+/* transmit destination (either set the MAC and/or PM bits for explicit
+ * control, or set this field to TX_DEST_DEFAULT for sensible default
+ * behaviour)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_TX_DEST_OFST 40
+#define	MC_CMD_FILTER_OP_V3_IN_TX_DEST_LEN 4
+/* enum: request default behaviour (based on filter type) */
+#define	MC_CMD_FILTER_OP_V3_IN_TX_DEST_DEFAULT  0xffffffff
+#define	MC_CMD_FILTER_OP_V3_IN_TX_DEST_MAC_LBN 0
+#define	MC_CMD_FILTER_OP_V3_IN_TX_DEST_MAC_WIDTH 1
+#define	MC_CMD_FILTER_OP_V3_IN_TX_DEST_PM_LBN 1
+#define	MC_CMD_FILTER_OP_V3_IN_TX_DEST_PM_WIDTH 1
+/* source MAC address to match (as bytes in network order) */
+#define	MC_CMD_FILTER_OP_V3_IN_SRC_MAC_OFST 44
+#define	MC_CMD_FILTER_OP_V3_IN_SRC_MAC_LEN 6
+/* source port to match (as bytes in network order) */
+#define	MC_CMD_FILTER_OP_V3_IN_SRC_PORT_OFST 50
+#define	MC_CMD_FILTER_OP_V3_IN_SRC_PORT_LEN 2
+/* destination MAC address to match (as bytes in network order) */
+#define	MC_CMD_FILTER_OP_V3_IN_DST_MAC_OFST 52
+#define	MC_CMD_FILTER_OP_V3_IN_DST_MAC_LEN 6
+/* destination port to match (as bytes in network order) */
+#define	MC_CMD_FILTER_OP_V3_IN_DST_PORT_OFST 58
+#define	MC_CMD_FILTER_OP_V3_IN_DST_PORT_LEN 2
+/* Ethernet type to match (as bytes in network order) */
+#define	MC_CMD_FILTER_OP_V3_IN_ETHER_TYPE_OFST 60
+#define	MC_CMD_FILTER_OP_V3_IN_ETHER_TYPE_LEN 2
+/* Inner VLAN tag to match (as bytes in network order) */
+#define	MC_CMD_FILTER_OP_V3_IN_INNER_VLAN_OFST 62
+#define	MC_CMD_FILTER_OP_V3_IN_INNER_VLAN_LEN 2
+/* Outer VLAN tag to match (as bytes in network order) */
+#define	MC_CMD_FILTER_OP_V3_IN_OUTER_VLAN_OFST 64
+#define	MC_CMD_FILTER_OP_V3_IN_OUTER_VLAN_LEN 2
+/* IP protocol to match (in low byte; set high byte to 0) */
+#define	MC_CMD_FILTER_OP_V3_IN_IP_PROTO_OFST 66
+#define	MC_CMD_FILTER_OP_V3_IN_IP_PROTO_LEN 2
+/* Firmware defined register 0 to match (reserved; set to 0) */
+#define	MC_CMD_FILTER_OP_V3_IN_FWDEF0_OFST 68
+#define	MC_CMD_FILTER_OP_V3_IN_FWDEF0_LEN 4
+/* VNI (for VXLAN/Geneve, when IP protocol is UDP) or VSID (for NVGRE, when IP
+ * protocol is GRE) to match (as bytes in network order; set last byte to 0 for
+ * VXLAN/NVGRE, or 1 for Geneve)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_VNI_OR_VSID_OFST 72
+#define	MC_CMD_FILTER_OP_V3_IN_VNI_OR_VSID_LEN 4
+#define	MC_CMD_FILTER_OP_V3_IN_VNI_VALUE_LBN 0
+#define	MC_CMD_FILTER_OP_V3_IN_VNI_VALUE_WIDTH 24
+#define	MC_CMD_FILTER_OP_V3_IN_VNI_TYPE_LBN 24
+#define	MC_CMD_FILTER_OP_V3_IN_VNI_TYPE_WIDTH 8
+/* enum: Match VXLAN traffic with this VNI */
+#define	MC_CMD_FILTER_OP_V3_IN_VNI_TYPE_VXLAN  0x0
+/* enum: Match Geneve traffic with this VNI */
+#define	MC_CMD_FILTER_OP_V3_IN_VNI_TYPE_GENEVE  0x1
+/* enum: Reserved for experimental development use */
+#define	MC_CMD_FILTER_OP_V3_IN_VNI_TYPE_EXPERIMENTAL  0xfe
+#define	MC_CMD_FILTER_OP_V3_IN_VSID_VALUE_LBN 0
+#define	MC_CMD_FILTER_OP_V3_IN_VSID_VALUE_WIDTH 24
+#define	MC_CMD_FILTER_OP_V3_IN_VSID_TYPE_LBN 24
+#define	MC_CMD_FILTER_OP_V3_IN_VSID_TYPE_WIDTH 8
+/* enum: Match NVGRE traffic with this VSID */
+#define	MC_CMD_FILTER_OP_V3_IN_VSID_TYPE_NVGRE  0x0
+/* source IP address to match (as bytes in network order; set last 12 bytes to
+ * 0 for IPv4 address)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_SRC_IP_OFST 76
+#define	MC_CMD_FILTER_OP_V3_IN_SRC_IP_LEN 16
+/* destination IP address to match (as bytes in network order; set last 12
+ * bytes to 0 for IPv4 address)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_DST_IP_OFST 92
+#define	MC_CMD_FILTER_OP_V3_IN_DST_IP_LEN 16
+/* VXLAN/NVGRE inner frame source MAC address to match (as bytes in network
+ * order)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_SRC_MAC_OFST 108
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_SRC_MAC_LEN 6
+/* VXLAN/NVGRE inner frame source port to match (as bytes in network order) */
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_SRC_PORT_OFST 114
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_SRC_PORT_LEN 2
+/* VXLAN/NVGRE inner frame destination MAC address to match (as bytes in
+ * network order)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_DST_MAC_OFST 116
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_DST_MAC_LEN 6
+/* VXLAN/NVGRE inner frame destination port to match (as bytes in network
+ * order)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_DST_PORT_OFST 122
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_DST_PORT_LEN 2
+/* VXLAN/NVGRE inner frame Ethernet type to match (as bytes in network order)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_ETHER_TYPE_OFST 124
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_ETHER_TYPE_LEN 2
+/* VXLAN/NVGRE inner frame Inner VLAN tag to match (as bytes in network order)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_INNER_VLAN_OFST 126
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_INNER_VLAN_LEN 2
+/* VXLAN/NVGRE inner frame Outer VLAN tag to match (as bytes in network order)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_OUTER_VLAN_OFST 128
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_OUTER_VLAN_LEN 2
+/* VXLAN/NVGRE inner frame IP protocol to match (in low byte; set high byte to
+ * 0)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_IP_PROTO_OFST 130
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_IP_PROTO_LEN 2
+/* VXLAN/NVGRE inner frame Firmware defined register 0 to match (reserved; set
+ * to 0)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_FWDEF0_OFST 132
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_FWDEF0_LEN 4
+/* VXLAN/NVGRE inner frame Firmware defined register 1 to match (reserved; set
+ * to 0)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_FWDEF1_OFST 136
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_FWDEF1_LEN 4
+/* VXLAN/NVGRE inner frame source IP address to match (as bytes in network
+ * order; set last 12 bytes to 0 for IPv4 address)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_SRC_IP_OFST 140
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_SRC_IP_LEN 16
+/* VXLAN/NVGRE inner frame destination IP address to match (as bytes in network
+ * order; set last 12 bytes to 0 for IPv4 address)
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_DST_IP_OFST 156
+#define	MC_CMD_FILTER_OP_V3_IN_IFRM_DST_IP_LEN 16
+/* Set an action for all packets matching this filter. The DPDK driver and dpdk
+ * f/w variant use their own specific delivery structures, which are documented
+ * in the DPDK Firmware Driver Interface (SF-119419-TC). Requesting anything
+ * other than MATCH_ACTION_NONE when the NIC is running another f/w variant
+ * will cause the filter insertion to fail with ENOTSUP.
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_ACTION_OFST 172
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_ACTION_LEN 4
+/* enum: do nothing extra */
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_ACTION_NONE  0x0
+/* enum: Set the match flag in the packet prefix for packets matching the
+ * filter (only with dpdk firmware, otherwise fails with ENOTSUP). Used to
+ * support the DPDK rte_flow "FLAG" action.
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_ACTION_FLAG  0x1
+/* enum: Insert MATCH_MARK_VALUE into the packet prefix for packets matching
+ * the filter (only with dpdk firmware, otherwise fails with ENOTSUP). Used to
+ * support the DPDK rte_flow "MARK" action.
+ */
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_ACTION_MARK  0x2
+/* the mark value for MATCH_ACTION_MARK */
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_MARK_VALUE_OFST 176
+#define	MC_CMD_FILTER_OP_V3_IN_MATCH_MARK_VALUE_LEN 4
+
 /* MC_CMD_FILTER_OP_OUT msgresponse */
 #define	MC_CMD_FILTER_OP_OUT_LEN 12
 /* identifies the type of operation requested */
@@ -9198,6 +9617,8 @@
 #define	MC_CMD_GET_CAPABILITIES_OUT_RXDP_PACKED_STREAM  0x2
 /* enum: Rules engine RXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_OUT_RXDP_RULES_ENGINE  0x5
+/* enum: Packet rate RXDP firmware */
+#define	MC_CMD_GET_CAPABILITIES_OUT_RXDP_DPDK  0x6
 /* enum: BIST RXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_OUT_RXDP_BIST  0x10a
 /* enum: RXDP Test firmware image 1 */
@@ -9231,6 +9652,8 @@
 #define	MC_CMD_GET_CAPABILITIES_OUT_TXDP_HIGH_PACKET_RATE  0x3
 /* enum: Rules engine TXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_OUT_TXDP_RULES_ENGINE  0x5
+/* enum: Packet rate TXDP firmware */
+#define	MC_CMD_GET_CAPABILITIES_OUT_TXDP_DPDK  0x6
 /* enum: BIST TXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_OUT_TXDP_BIST  0x12d
 /* enum: TXDP Test firmware image 1 */
@@ -9275,6 +9698,10 @@
 #define	MC_CMD_GET_CAPABILITIES_OUT_RXPD_FW_TYPE_LAYER2_PERF  0x7
 /* enum: Rules engine RX PD production firmware */
 #define	MC_CMD_GET_CAPABILITIES_OUT_RXPD_FW_TYPE_RULES_ENGINE  0x8
+/* enum: reserved value - do not use (bug69716) */
+#define	MC_CMD_GET_CAPABILITIES_OUT_RXPD_FW_TYPE_RESERVED_9  0x9
+/* enum: Packet rate RX PD production firmware */
+#define	MC_CMD_GET_CAPABILITIES_OUT_RXPD_FW_TYPE_DPDK  0xa
 /* enum: RX PD firmware for GUE parsing prototype (Medford development only) */
 #define	MC_CMD_GET_CAPABILITIES_OUT_RXPD_FW_TYPE_TESTFW_GUE_PROTOTYPE  0xe
 /* enum: RX PD firmware parsing but not filtering network overlay tunnel
@@ -9314,6 +9741,10 @@
 #define	MC_CMD_GET_CAPABILITIES_OUT_TXPD_FW_TYPE_LAYER2_PERF  0x7
 /* enum: Rules engine TX PD production firmware */
 #define	MC_CMD_GET_CAPABILITIES_OUT_TXPD_FW_TYPE_RULES_ENGINE  0x8
+/* enum: reserved value - do not use (bug69716) */
+#define	MC_CMD_GET_CAPABILITIES_OUT_TXPD_FW_TYPE_RESERVED_9  0x9
+/* enum: Packet rate TX PD production firmware */
+#define	MC_CMD_GET_CAPABILITIES_OUT_TXPD_FW_TYPE_DPDK  0xa
 /* enum: RX PD firmware for GUE parsing prototype (Medford development only) */
 #define	MC_CMD_GET_CAPABILITIES_OUT_TXPD_FW_TYPE_TESTFW_GUE_PROTOTYPE  0xe
 /* Hardware capabilities of NIC */
@@ -9400,6 +9831,8 @@
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXDP_PACKED_STREAM  0x2
 /* enum: Rules engine RXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXDP_RULES_ENGINE  0x5
+/* enum: Packet rate RXDP firmware */
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXDP_DPDK  0x6
 /* enum: BIST RXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXDP_BIST  0x10a
 /* enum: RXDP Test firmware image 1 */
@@ -9433,6 +9866,8 @@
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_TXDP_HIGH_PACKET_RATE  0x3
 /* enum: Rules engine TXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_TXDP_RULES_ENGINE  0x5
+/* enum: Packet rate TXDP firmware */
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_TXDP_DPDK  0x6
 /* enum: BIST TXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_TXDP_BIST  0x12d
 /* enum: TXDP Test firmware image 1 */
@@ -9477,6 +9912,10 @@
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXPD_FW_TYPE_LAYER2_PERF  0x7
 /* enum: Rules engine RX PD production firmware */
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXPD_FW_TYPE_RULES_ENGINE  0x8
+/* enum: reserved value - do not use (bug69716) */
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXPD_FW_TYPE_RESERVED_9  0x9
+/* enum: Packet rate RX PD production firmware */
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXPD_FW_TYPE_DPDK  0xa
 /* enum: RX PD firmware for GUE parsing prototype (Medford development only) */
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXPD_FW_TYPE_TESTFW_GUE_PROTOTYPE  0xe
 /* enum: RX PD firmware parsing but not filtering network overlay tunnel
@@ -9516,6 +9955,10 @@
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_TXPD_FW_TYPE_LAYER2_PERF  0x7
 /* enum: Rules engine TX PD production firmware */
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_TXPD_FW_TYPE_RULES_ENGINE  0x8
+/* enum: reserved value - do not use (bug69716) */
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_TXPD_FW_TYPE_RESERVED_9  0x9
+/* enum: Packet rate TX PD production firmware */
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_TXPD_FW_TYPE_DPDK  0xa
 /* enum: RX PD firmware for GUE parsing prototype (Medford development only) */
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_TXPD_FW_TYPE_TESTFW_GUE_PROTOTYPE  0xe
 /* Hardware capabilities of NIC */
@@ -9559,6 +10002,18 @@
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_MCDI_DB_RETURN_WIDTH 1
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_CTPIO_LBN 15
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_CTPIO_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_TSA_SUPPORT_LBN 16
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_TSA_SUPPORT_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_TSA_BOUND_LBN 17
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_TSA_BOUND_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_SF_ADAPTER_AUTHENTICATION_LBN 18
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_SF_ADAPTER_AUTHENTICATION_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_FILTER_ACTION_FLAG_LBN 19
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_FILTER_ACTION_FLAG_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_FILTER_ACTION_MARK_LBN 20
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_FILTER_ACTION_MARK_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_EQUAL_STRIDE_PACKED_STREAM_LBN 21
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_EQUAL_STRIDE_PACKED_STREAM_WIDTH 1
 /* Number of FATSOv2 contexts per datapath supported by this NIC. Not present
  * on older firmware (check the length).
  */
@@ -9689,6 +10144,8 @@
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXDP_PACKED_STREAM  0x2
 /* enum: Rules engine RXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXDP_RULES_ENGINE  0x5
+/* enum: Packet rate RXDP firmware */
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXDP_DPDK  0x6
 /* enum: BIST RXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXDP_BIST  0x10a
 /* enum: RXDP Test firmware image 1 */
@@ -9722,6 +10179,8 @@
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_TXDP_HIGH_PACKET_RATE  0x3
 /* enum: Rules engine TXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_TXDP_RULES_ENGINE  0x5
+/* enum: Packet rate TXDP firmware */
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_TXDP_DPDK  0x6
 /* enum: BIST TXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_TXDP_BIST  0x12d
 /* enum: TXDP Test firmware image 1 */
@@ -9766,6 +10225,10 @@
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXPD_FW_TYPE_LAYER2_PERF  0x7
 /* enum: Rules engine RX PD production firmware */
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXPD_FW_TYPE_RULES_ENGINE  0x8
+/* enum: reserved value - do not use (bug69716) */
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXPD_FW_TYPE_RESERVED_9  0x9
+/* enum: Packet rate RX PD production firmware */
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXPD_FW_TYPE_DPDK  0xa
 /* enum: RX PD firmware for GUE parsing prototype (Medford development only) */
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXPD_FW_TYPE_TESTFW_GUE_PROTOTYPE  0xe
 /* enum: RX PD firmware parsing but not filtering network overlay tunnel
@@ -9805,6 +10268,10 @@
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_TXPD_FW_TYPE_LAYER2_PERF  0x7
 /* enum: Rules engine TX PD production firmware */
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_TXPD_FW_TYPE_RULES_ENGINE  0x8
+/* enum: reserved value - do not use (bug69716) */
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_TXPD_FW_TYPE_RESERVED_9  0x9
+/* enum: Packet rate TX PD production firmware */
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_TXPD_FW_TYPE_DPDK  0xa
 /* enum: RX PD firmware for GUE parsing prototype (Medford development only) */
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_TXPD_FW_TYPE_TESTFW_GUE_PROTOTYPE  0xe
 /* Hardware capabilities of NIC */
@@ -9848,6 +10315,18 @@
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_MCDI_DB_RETURN_WIDTH 1
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_CTPIO_LBN 15
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_CTPIO_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_TSA_SUPPORT_LBN 16
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_TSA_SUPPORT_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_TSA_BOUND_LBN 17
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_TSA_BOUND_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_SF_ADAPTER_AUTHENTICATION_LBN 18
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_SF_ADAPTER_AUTHENTICATION_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_FILTER_ACTION_FLAG_LBN 19
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_FILTER_ACTION_FLAG_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_FILTER_ACTION_MARK_LBN 20
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_FILTER_ACTION_MARK_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_EQUAL_STRIDE_PACKED_STREAM_LBN 21
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_EQUAL_STRIDE_PACKED_STREAM_WIDTH 1
 /* Number of FATSOv2 contexts per datapath supported by this NIC. Not present
  * on older firmware (check the length).
  */
@@ -10003,6 +10482,8 @@
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXDP_PACKED_STREAM  0x2
 /* enum: Rules engine RXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXDP_RULES_ENGINE  0x5
+/* enum: Packet rate RXDP firmware */
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXDP_DPDK  0x6
 /* enum: BIST RXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXDP_BIST  0x10a
 /* enum: RXDP Test firmware image 1 */
@@ -10036,6 +10517,8 @@
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_TXDP_HIGH_PACKET_RATE  0x3
 /* enum: Rules engine TXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_TXDP_RULES_ENGINE  0x5
+/* enum: Packet rate TXDP firmware */
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_TXDP_DPDK  0x6
 /* enum: BIST TXDP firmware */
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_TXDP_BIST  0x12d
 /* enum: TXDP Test firmware image 1 */
@@ -10080,6 +10563,10 @@
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXPD_FW_TYPE_LAYER2_PERF  0x7
 /* enum: Rules engine RX PD production firmware */
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXPD_FW_TYPE_RULES_ENGINE  0x8
+/* enum: reserved value - do not use (bug69716) */
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXPD_FW_TYPE_RESERVED_9  0x9
+/* enum: Packet rate RX PD production firmware */
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXPD_FW_TYPE_DPDK  0xa
 /* enum: RX PD firmware for GUE parsing prototype (Medford development only) */
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXPD_FW_TYPE_TESTFW_GUE_PROTOTYPE  0xe
 /* enum: RX PD firmware parsing but not filtering network overlay tunnel
@@ -10119,6 +10606,10 @@
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_TXPD_FW_TYPE_LAYER2_PERF  0x7
 /* enum: Rules engine TX PD production firmware */
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_TXPD_FW_TYPE_RULES_ENGINE  0x8
+/* enum: reserved value - do not use (bug69716) */
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_TXPD_FW_TYPE_RESERVED_9  0x9
+/* enum: Packet rate TX PD production firmware */
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_TXPD_FW_TYPE_DPDK  0xa
 /* enum: RX PD firmware for GUE parsing prototype (Medford development only) */
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_TXPD_FW_TYPE_TESTFW_GUE_PROTOTYPE  0xe
 /* Hardware capabilities of NIC */
@@ -10162,6 +10653,18 @@
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_MCDI_DB_RETURN_WIDTH 1
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_CTPIO_LBN 15
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_CTPIO_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_TSA_SUPPORT_LBN 16
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_TSA_SUPPORT_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_TSA_BOUND_LBN 17
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_TSA_BOUND_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_SF_ADAPTER_AUTHENTICATION_LBN 18
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_SF_ADAPTER_AUTHENTICATION_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_FILTER_ACTION_FLAG_LBN 19
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_FILTER_ACTION_FLAG_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_FILTER_ACTION_MARK_LBN 20
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_FILTER_ACTION_MARK_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_EQUAL_STRIDE_PACKED_STREAM_LBN 21
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_EQUAL_STRIDE_PACKED_STREAM_WIDTH 1
 /* Number of FATSOv2 contexts per datapath supported by this NIC. Not present
  * on older firmware (check the length).
  */
@@ -12187,6 +12690,10 @@
 #define	MC_CMD_KR_TUNE_IN_POLL_EYE_PLOT  0x6
 /* enum: Read Figure Of Merit (eye quality, higher is better). */
 #define	MC_CMD_KR_TUNE_IN_READ_FOM  0x7
+/* enum: Start/stop link training frames */
+#define	MC_CMD_KR_TUNE_IN_LINK_TRAIN_RUN  0x8
+/* enum: Issue KR link training command (control training coefficients) */
+#define	MC_CMD_KR_TUNE_IN_LINK_TRAIN_CMD  0x9
 /* Align the arguments to 32 bits */
 #define	MC_CMD_KR_TUNE_IN_KR_TUNE_RSVD_OFST 1
 #define	MC_CMD_KR_TUNE_IN_KR_TUNE_RSVD_LEN 3
@@ -12257,34 +12764,54 @@
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_CTLE_POLE  0xc
 /* enum: CTLE peaking (0-31, Medford2) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_CTLE_PEAK  0xd
-/* enum: DFE Tap1 - even path (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap1 - even path (Medford2 - 6 bit signed (-29 - +29)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP1_EVEN  0xe
-/* enum: DFE Tap1 - odd path (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap1 - odd path (Medford2 - 6 bit signed (-29 - +29)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP1_ODD  0xf
-/* enum: DFE Tap2 (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap2 (Medford2 - 6 bit signed (-20 - +20)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP2  0x10
-/* enum: DFE Tap3 (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap3 (Medford2 - 6 bit signed (-20 - +20)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP3  0x11
-/* enum: DFE Tap4 (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap4 (Medford2 - 6 bit signed (-20 - +20)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP4  0x12
-/* enum: DFE Tap5 (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap5 (Medford2 - 6 bit signed (-24 - +24)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP5  0x13
-/* enum: DFE Tap6 (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap6 (Medford2 - 6 bit signed (-24 - +24)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP6  0x14
-/* enum: DFE Tap7 (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap7 (Medford2 - 6 bit signed (-24 - +24)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP7  0x15
-/* enum: DFE Tap8 (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap8 (Medford2 - 6 bit signed (-24 - +24)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP8  0x16
-/* enum: DFE Tap9 (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap9 (Medford2 - 6 bit signed (-24 - +24)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP9  0x17
-/* enum: DFE Tap10 (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap10 (Medford2 - 6 bit signed (-24 - +24)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP10  0x18
-/* enum: DFE Tap11 (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap11 (Medford2 - 6 bit signed (-24 - +24)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP11  0x19
-/* enum: DFE Tap12 (Medford2 - 0-63, sign-magnitude (-31 - +31)) */
+/* enum: DFE Tap12 (Medford2 - 6 bit signed (-24 - +24)) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP12  0x1a
-/* enum: I/Q clk offset (Medford2 - 0-5, sign-magnitude (-5 - +5)) */
+/* enum: I/Q clk offset (Medford2 - 4 bit signed (-5 - +5))) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_IQ_OFF  0x1b
+/* enum: Negative h1 polarity data sampler offset calibration code, even path
+ * (Medford2 - 6 bit signed (-29 - +29)))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_H1N_OFF_EVEN  0x1c
+/* enum: Negative h1 polarity data sampler offset calibration code, odd path
+ * (Medford2 - 6 bit signed (-29 - +29)))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_H1N_OFF_ODD  0x1d
+/* enum: Positive h1 polarity data sampler offset calibration code, even path
+ * (Medford2 - 6 bit signed (-29 - +29)))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_H1P_OFF_EVEN  0x1e
+/* enum: Positive h1 polarity data sampler offset calibration code, odd path
+ * (Medford2 - 6 bit signed (-29 - +29)))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_H1P_OFF_ODD  0x1f
+/* enum: CDR calibration loop code (Medford2) */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_CDR_PVT  0x20
+/* enum: CDR integral loop code (Medford2) */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_CDR_INTEG  0x21
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_LANE_LBN 8
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_LANE_WIDTH 3
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_LANE_0  0x0 /* enum */
@@ -12461,9 +12988,12 @@
 /* Align the arguments to 32 bits */
 #define	MC_CMD_KR_TUNE_START_EYE_PLOT_V2_IN_KR_TUNE_RSVD_OFST 1
 #define	MC_CMD_KR_TUNE_START_EYE_PLOT_V2_IN_KR_TUNE_RSVD_LEN 3
-/* Port-relative lane to scan eye on */
 #define	MC_CMD_KR_TUNE_START_EYE_PLOT_V2_IN_LANE_OFST 4
 #define	MC_CMD_KR_TUNE_START_EYE_PLOT_V2_IN_LANE_LEN 4
+#define	MC_CMD_KR_TUNE_START_EYE_PLOT_V2_IN_LANE_NUM_LBN 0
+#define	MC_CMD_KR_TUNE_START_EYE_PLOT_V2_IN_LANE_NUM_WIDTH 8
+#define	MC_CMD_KR_TUNE_START_EYE_PLOT_V2_IN_LANE_ABS_REL_LBN 31
+#define	MC_CMD_KR_TUNE_START_EYE_PLOT_V2_IN_LANE_ABS_REL_WIDTH 1
 /* Scan duration / cycle count */
 #define	MC_CMD_KR_TUNE_START_EYE_PLOT_V2_IN_BER_OFST 8
 #define	MC_CMD_KR_TUNE_START_EYE_PLOT_V2_IN_BER_LEN 4
@@ -12499,12 +13029,91 @@
 #define	MC_CMD_KR_TUNE_READ_FOM_IN_KR_TUNE_RSVD_LEN 3
 #define	MC_CMD_KR_TUNE_READ_FOM_IN_LANE_OFST 4
 #define	MC_CMD_KR_TUNE_READ_FOM_IN_LANE_LEN 4
+#define	MC_CMD_KR_TUNE_READ_FOM_IN_LANE_NUM_LBN 0
+#define	MC_CMD_KR_TUNE_READ_FOM_IN_LANE_NUM_WIDTH 8
+#define	MC_CMD_KR_TUNE_READ_FOM_IN_LANE_ABS_REL_LBN 31
+#define	MC_CMD_KR_TUNE_READ_FOM_IN_LANE_ABS_REL_WIDTH 1
 
 /* MC_CMD_KR_TUNE_READ_FOM_OUT msgresponse */
 #define	MC_CMD_KR_TUNE_READ_FOM_OUT_LEN 4
 #define	MC_CMD_KR_TUNE_READ_FOM_OUT_FOM_OFST 0
 #define	MC_CMD_KR_TUNE_READ_FOM_OUT_FOM_LEN 4
 
+/* MC_CMD_KR_TUNE_LINK_TRAIN_RUN_IN msgrequest */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_RUN_IN_LEN 8
+/* Requested operation */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_RUN_IN_KR_TUNE_OP_OFST 0
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_RUN_IN_KR_TUNE_OP_LEN 1
+/* Align the arguments to 32 bits */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_RUN_IN_KR_TUNE_RSVD_OFST 1
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_RUN_IN_KR_TUNE_RSVD_LEN 3
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_RUN_IN_RUN_OFST 4
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_RUN_IN_RUN_LEN 4
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_RUN_IN_STOP  0x0 /* enum */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_RUN_IN_START  0x1 /* enum */
+
+/* MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN msgrequest */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_LEN 28
+/* Requested operation */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_KR_TUNE_OP_OFST 0
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_KR_TUNE_OP_LEN 1
+/* Align the arguments to 32 bits */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_KR_TUNE_RSVD_OFST 1
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_KR_TUNE_RSVD_LEN 3
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_LANE_OFST 4
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_LANE_LEN 4
+/* Set INITIALIZE state */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_INITIALIZE_OFST 8
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_INITIALIZE_LEN 4
+/* Set PRESET state */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_PRESET_OFST 12
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_PRESET_LEN 4
+/* C(-1) request */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_CM1_OFST 16
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_CM1_LEN 4
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_REQ_HOLD  0x0 /* enum */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_REQ_INCREMENT  0x1 /* enum */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_REQ_DECREMENT  0x2 /* enum */
+/* C(0) request */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_C0_OFST 20
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_C0_LEN 4
+/*            Enum values, see field(s): */
+/*               MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN/CM1 */
+/* C(+1) request */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_CP1_OFST 24
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN_CP1_LEN 4
+/*            Enum values, see field(s): */
+/*               MC_CMD_KR_TUNE_LINK_TRAIN_CMD_IN/CM1 */
+
+/* MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT msgresponse */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_LEN 24
+/* C(-1) status */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_CM1_STATUS_OFST 0
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_CM1_STATUS_LEN 4
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_STATUS_NOT_UPDATED  0x0 /* enum */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_STATUS_UPDATED  0x1 /* enum */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_STATUS_MINIMUM  0x2 /* enum */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_STATUS_MAXIMUM  0x3 /* enum */
+/* C(0) status */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_C0_STATUS_OFST 4
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_C0_STATUS_LEN 4
+/*            Enum values, see field(s): */
+/*               MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT/CM1 */
+/* C(+1) status */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_CP1_STATUS_OFST 8
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_CP1_STATUS_LEN 4
+/*            Enum values, see field(s): */
+/*               MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT/CM1 */
+/* C(-1) value */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_CM1_VALUE_OFST 12
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_CM1_VALUE_LEN 4
+/* C(0) value */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_C0_VALUE_OFST 16
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_C0_VALUE_LEN 4
+/* C(+1) status */
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_CP1_VALUE_OFST 20
+#define	MC_CMD_KR_TUNE_LINK_TRAIN_CMD_OUT_CP1_VALUE_LEN 4
+
 
 /***********************************/
 /* MC_CMD_PCIE_TUNE
@@ -15760,6 +16369,45 @@
 #define	MC_CMD_TSAN_INFO_OUT_GET_CFG_GUID_LEN 1
 #define	MC_CMD_TSAN_INFO_OUT_GET_CFG_GUID_NUM 6
 
+/* MC_CMD_TSAN_INFO_OUT_GET_CFG_V2 msgresponse */
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_LEN 36
+/* Information about the configuration parameters returned in this response. */
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_CONFIG_WORD_OFST 0
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_CONFIG_WORD_LEN 4
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_CAP_FLAGS_LBN 0
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_CAP_FLAGS_WIDTH 16
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_FLAG_HOST_UUID_VALID_LBN 0
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_FLAG_HOST_UUID_VALID_WIDTH 1
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_NUM_PORTS_LBN 16
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_NUM_PORTS_WIDTH 8
+/* 16-byte host UUID read out of the adapter. See MC_CMD_HOST_INFO_OP_GET_UUID
+ * for further details.
+ */
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_HOST_UUID_OFST 4
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_HOST_UUID_LEN 1
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_HOST_UUID_NUM 16
+/* A unique identifier per adapter. The base MAC address of the card is used
+ * for this purpose.
+ */
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_GUID_OFST 20
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_GUID_LEN 1
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_GUID_NUM 6
+/* Unused bytes, defined for 32-bit alignment of new fields. */
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_UNUSED_OFST 26
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_UNUSED_LEN 2
+/* Maximum number of TSA statistics counters in each direction of dataflow
+ * supported on the card. Note that the statistics counters are always
+ * allocated in pairs, i.e. a counter ID is associated with one Tx and one Rx
+ * counter.
+ */
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_MAX_STATS_OFST 28
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_MAX_STATS_LEN 4
+/* Width of each statistics counter (represented in bits). This gives an
+ * indication of wrap point to the user.
+ */
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_STATS_WIDTH_OFST 32
+#define	MC_CMD_TSAN_INFO_OUT_GET_CFG_V2_STATS_WIDTH_LEN 4
+
 
 /***********************************/
 /* MC_CMD_TSA_STATISTICS
@@ -16290,6 +16938,21 @@
 #define	MC_CMD_SUC_VERSION_OUT_CHIP_ID_OFST 20
 #define	MC_CMD_SUC_VERSION_OUT_CHIP_ID_LEN 4
 
+/* MC_CMD_SUC_BOOT_VERSION_IN msgrequest: Get the version of the SUC boot
+ * loader.
+ */
+#define	MC_CMD_SUC_BOOT_VERSION_IN_LEN 4
+#define	MC_CMD_SUC_BOOT_VERSION_IN_MAGIC_OFST 0
+#define	MC_CMD_SUC_BOOT_VERSION_IN_MAGIC_LEN 4
+/* enum: Requests the SUC boot version. */
+#define	MC_CMD_SUC_VERSION_GET_BOOT_VERSION 0xb007700b
+
+/* MC_CMD_SUC_BOOT_VERSION_OUT msgresponse */
+#define	MC_CMD_SUC_BOOT_VERSION_OUT_LEN 4
+/* The SUC boot version */
+#define	MC_CMD_SUC_BOOT_VERSION_OUT_VERSION_OFST 0
+#define	MC_CMD_SUC_BOOT_VERSION_OUT_VERSION_LEN 4
+
 
 /***********************************/
 /* MC_CMD_SUC_MANFTEST
-- 
2.7.4

      parent reply	other threads:[~2018-02-20  7:35 UTC|newest]

Thread overview: 82+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-20  7:33 [dpdk-dev] [PATCH 00/80] net/sfc/base: update base driver Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 01/80] net/sfc: add missing defines for SAL annotation Andrew Rybchenko
2018-03-05 20:47   ` Ferruh Yigit
2018-02-20  7:33 ` [dpdk-dev] [PATCH 02/80] net/sfc/base: regenerate files with genfwdef after ID update Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 03/80] net/sfc/base: update autogenerated headers from firmwaresrc Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 04/80] net/sfc/base: add 3.3V and 12.0V current sensors Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 05/80] net/sfc/base: add Medford2 PCI IDs Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 06/80] net/sfc/base: add efsys option for Medford2 Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 07/80] net/sfc/base: add Medford2 support to NIC module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 08/80] net/sfc/base: correct PIO buffer dimensions for Medford2 Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 09/80] net/sfc/base: move RxDP config get to EF10 NIC code Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 10/80] net/sfc/base: add Medford2 support to EV module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 11/80] net/sfc/base: add Medford2 support to FILTER module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 12/80] net/sfc/base: add Medford2 support to INTR module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 13/80] net/sfc/base: add Medford2 support to MAC module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 14/80] net/sfc/base: add Medford2 support to MCDI module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 15/80] net/sfc/base: add Medford2 support to PHY module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 16/80] net/sfc/base: add Medford2 support to Rx module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 17/80] net/sfc/base: add Medford2 support to Tx module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 18/80] net/sfc/base: add Medford2 support to NVRAM module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 19/80] net/sfc/base: add Medford2 support to SRAM module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 20/80] net/sfc/base: add Medford2 support to BOOTCFG module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 21/80] net/sfc/base: add Medford2 support to VPD module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 22/80] net/sfc/base: add Medford2 support to MON module Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 23/80] net/sfc/base: support runtime VI window size Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 24/80] net/sfc/base: improve comments for EF10 ext port mapping Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 25/80] net/sfc/base: add method to make checksum option descriptors Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 26/80] net/sfc/base: update hardware headers for Medford2 Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 27/80] net/sfc/base: refactoring eliminating code analysis warnings Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 28/80] net/sfc/base: fix too long line Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 29/80] net/sfc/base: update notes on interrupt testing on VFs Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 30/80] net/sfc/base: report memory BAR number Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 31/80] net/sfc/base: simplify loopback type checking Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 32/80] net/sfc/base: add support new link modes Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 33/80] net/sfc/base: add new loopback modes Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 34/80] net/sfc/base: add efsys macro to get memory region size Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 35/80] net/sfc/base: handle new speeds in linkchange events Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 36/80] net/sfc/base: refactor EF10 get datapath capabilities Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 37/80] net/sfc/base: retrieve number of MAC stats from NIC Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 38/80] net/sfc/base: improve robustness of MAC stats get via MCDI Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 39/80] net/sfc/base: use MAC stats DMA buffer size from caps Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 40/80] net/sfc/base: use MAC stats DMA buffer size when decoding Andrew Rybchenko
2018-02-20  7:33 ` [dpdk-dev] [PATCH 41/80] net/sfc/base: run mkconfig.py to add FEC MAC stats Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 42/80] net/sfc/base: decode Medford2 FEC stats if available Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 43/80] net/sfc/base: resolve code analysis warnings Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 44/80] net/sfc: size MAC stats DMA buffer to support Medford2 Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 45/80] net/sfc/base: remove MAC stats size define Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 46/80] net/sfc/base: use correct name for frame truncation event Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 47/80] net/sfc/base: add ef10 NIC board config method Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 48/80] net/sfc/base: move port config to ef10 NIC board config Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 49/80] net/sfc/base: move PF/VF " Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 50/80] net/sfc/base: move MAC address config to ef10 NIC board cfg Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 51/80] net/sfc/base: move legacy board " Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 52/80] net/sfc/base: move PHY/link " Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 53/80] net/sfc/base: move datapath " Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 54/80] net/sfc/base: move Rx config to ef10 NIC board config Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 55/80] net/sfc/base: move Tx " Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 56/80] net/sfc/base: move limits " Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 57/80] net/sfc/base: move vector " Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 58/80] net/sfc/base: move privilege " Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 59/80] net/sfc/base: move VI window size config to ef10 NIC board Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 60/80] net/sfc/base: remove obsolete comments Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 61/80] net/sfc/base: support FEC mode settings Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 62/80] net/sfc/base: support Medford2 event timer semantics Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 63/80] net/sfc/base: clarify port mode names and masks Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 64/80] net/sfc/base: group Medford external port mapping entries Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 65/80] net/sfc/base: add Medford2 support for external port numbers Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 66/80] net/sfc/base: add Medford2 support for licencing Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 67/80] net/sfc/base: add Medford2 support for tunnel encapsulations Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 68/80] net/sfc/base: provide a flag for controlling CTPIO mode Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 69/80] net/sfc/base: add 1.3V voltage and current sensors Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 70/80] net/sfc/base: document the event type for CTPIO sends Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 71/80] net/sfc/base: run genfwdef to update headers Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 72/80] net/sfc/base: add CTPIO statistics Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 73/80] net/sfc/base: add bit to indicate CTPIO availability Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 74/80] net/sfc/base: regenerate headers to pick up CTPIO stats Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 75/80] net/sfc/base: support " Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 76/80] net/sfc/base: add encapsulated TSOv2 capability Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 77/80] net/sfc/base: add outer IP ID parameter to TSOv2 descriptor Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 78/80] net/sfc/base: add firmware image layout option Andrew Rybchenko
2018-02-20  7:34 ` [dpdk-dev] [PATCH 79/80] net/sfc/base: add signed image layout support Andrew Rybchenko
2018-02-20  7:34 ` Andrew Rybchenko [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1519112078-20113-81-git-send-email-arybchenko@solarflare.com \
    --to=arybchenko@solarflare.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).