DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] ethdev: add support for WRED thresholds in bytes
@ 2018-02-20 13:30 Nikhil Rao
  2018-05-01 15:15 ` Dumitrescu, Cristian
  0 siblings, 1 reply; 2+ messages in thread
From: Nikhil Rao @ 2018-02-20 13:30 UTC (permalink / raw)
  To: cristian.dumitrescu
  Cc: dev, benjamin.h.shelton, narender.vangati, abhinandan.gujjar, nikhil.rao

WRED thresholds can be specified in bytes if the TM leaf
node supports it. Also extend WRED thresholds to 32 bits from 16.

TM capability (port/level/queue) fields cman_wred_packet_mode_supported and
cman_wred_byte_mode_supported, when non-zero, indicate support for WRED
thresholds in packets and bytes respectively.

The packet_mode member of struct rte_tm_wred_params, when non-zero,
indicates that the min and max thresholds are specified in
packets and when zero, indicates that the min and max thresholds
are specified in bytes.

Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
---

Thanks to Cristian for his help with developing this patch.

 lib/librte_ether/rte_tm.h                | 53 ++++++++++++++++++++++++++++++--
 drivers/net/softnic/rte_eth_softnic_tm.c | 22 +++++++++++++
 2 files changed, 73 insertions(+), 2 deletions(-)

diff --git a/lib/librte_ether/rte_tm.h b/lib/librte_ether/rte_tm.h
index 2b25a87..23098ab 100644
--- a/lib/librte_ether/rte_tm.h
+++ b/lib/librte_ether/rte_tm.h
@@ -377,6 +377,22 @@ struct rte_tm_capabilities {
 	 */
 	uint32_t sched_wfq_weight_max;
 
+	/** WRED packet mode support. When non-zero, this parameter indicates
+	 * that there is atleast one leaf node that supports the WRED packet
+	 * mode, which might not be true for all the leaf nodes. In packet
+	 * mode, the WRED thresholds specify the queue length in packets, as
+	 * opposed to bytes.
+	 */
+	int cman_wred_packet_mode_supported;
+
+	/** WRED byte mode support. When non-zero, this parameter indicates that
+	 * there is atleast one leaf node that supports the WRED byte mode,
+	 * which might not be true for all the leaf nodes. In byte mode, the
+	 * WRED thresholds specify the queue length in bytes, as opposed to
+	 * packets.
+	 */
+	int cman_wred_byte_mode_supported;
+
 	/** Head drop algorithm support. When non-zero, this parameter
 	 * indicates that there is at least one leaf node that supports the head
 	 * drop algorithm, which might not be true for all the leaf nodes.
@@ -628,6 +644,24 @@ struct rte_tm_level_capabilities {
 			 */
 			uint32_t shaper_shared_n_max;
 
+			/** WRED packet mode support. When non-zero, this
+			 * parameter indicates that there is atleast one leaf
+			 * node on this level that supports the WRED packet
+			 * mode, which might not be true for all the leaf
+			 * nodes. In packet mode, the WRED thresholds specify
+			 * the queue length in packets, as opposed to bytes.
+			 */
+			int cman_wred_packet_mode_supported;
+
+			/** WRED byte mode support. When non-zero, this
+			 * parameter indicates that there is atleast one leaf
+			 * node on this level that supports the WRED byte mode,
+			 * which might not be true for all the leaf nodes. In
+			 * byte mode, the WRED thresholds specify the queue
+			 * length in bytes, as opposed to packets.
+			 */
+			int cman_wred_byte_mode_supported;
+
 			/** Head drop algorithm support. When non-zero, this
 			 * parameter indicates that there is at least one leaf
 			 * node on this level that supports the head drop
@@ -743,6 +777,12 @@ struct rte_tm_node_capabilities {
 
 		/** Items valid only for leaf nodes. */
 		struct {
+			/** WRED packet mode support for current node. */
+			int cman_wred_packet_mode_supported;
+
+			/** WRED byte mode support for current node. */
+			int cman_wred_byte_mode_supported;
+
 			/** Head drop algorithm support for current node. */
 			int cman_head_drop_supported;
 
@@ -791,10 +831,10 @@ enum rte_tm_cman_mode {
  */
 struct rte_tm_red_params {
 	/** Minimum queue threshold */
-	uint16_t min_th;
+	uint32_t min_th;
 
 	/** Maximum queue threshold */
-	uint16_t max_th;
+	uint32_t max_th;
 
 	/** Inverse of packet marking probability maximum value (maxp), i.e.
 	 * maxp_inv = 1 / maxp
@@ -815,10 +855,19 @@ struct rte_tm_red_params {
  * WRED context is used to perform congestion management for a single leaf
  * node, while a shared WRED context is used to perform congestion management
  * for a group of leaf nodes.
+ *
+ * @see struct rte_tm_capabilities::cman_wred_packet_mode_supported
+ * @see struct rte_tm_capabilities::cman_wred_byte_mode_supported
  */
 struct rte_tm_wred_params {
 	/** One set of RED parameters per packet color */
 	struct rte_tm_red_params red_params[RTE_TM_COLORS];
+
+	/** When non-zero, the *min_th* and *max_th* thresholds are specified
+	 * in packets (WRED packet mode). When zero, the *min_th* and *max_th*
+	 * thresholds are specified in bytes (WRED byte mode)
+	 */
+	int packet_mode;
 };
 
 /**
diff --git a/drivers/net/softnic/rte_eth_softnic_tm.c b/drivers/net/softnic/rte_eth_softnic_tm.c
index 79f1c6a..e915c36 100644
--- a/drivers/net/softnic/rte_eth_softnic_tm.c
+++ b/drivers/net/softnic/rte_eth_softnic_tm.c
@@ -479,6 +479,8 @@
 	.sched_wfq_n_groups_max = 1,
 	.sched_wfq_weight_max = UINT32_MAX,
 
+	.cman_wred_packet_mode_supported = WRED_SUPPORTED,
+	.cman_wred_byte_mode_supported = 0,
 	.cman_head_drop_supported = 0,
 	.cman_wred_context_n_max = 0,
 	.cman_wred_context_private_n_max = 0,
@@ -667,6 +669,8 @@
 			.shaper_shared_n_max = 0,
 
 			.cman_head_drop_supported = 0,
+			.cman_wred_packet_mode_supported = WRED_SUPPORTED,
+			.cman_wred_byte_mode_supported = 0,
 			.cman_wred_context_private_supported = WRED_SUPPORTED,
 			.cman_wred_context_shared_n_max = 0,
 
@@ -828,6 +832,8 @@
 
 		{.leaf = {
 			.cman_head_drop_supported = 0,
+			.cman_wred_packet_mode_supported = WRED_SUPPORTED,
+			.cman_wred_byte_mode_supported = 0,
 			.cman_wred_context_private_supported = WRED_SUPPORTED,
 			.cman_wred_context_shared_n_max = 0,
 		} },
@@ -1226,6 +1232,14 @@
 			NULL,
 			rte_strerror(EINVAL));
 
+	/* WRED profile should be in packet mode */
+	if (profile->packet_mode == 0)
+		return -rte_tm_error_set(error,
+			ENOTSUP,
+			RTE_TM_ERROR_TYPE_WRED_PROFILE,
+			NULL,
+			rte_strerror(ENOTSUP));
+
 	/* WRED profile must not exist. */
 	wp = tm_wred_profile_search(dev, wred_profile_id);
 	if (wp)
@@ -1248,6 +1262,14 @@
 		uint16_t min_th = profile->red_params[color].min_th;
 		uint16_t max_th = profile->red_params[color].max_th;
 
+		if (profile->red_params[color].min_th >= (1 << 16) ||
+				profile->red_params[color].max_th >= (1 << 16))
+			return -rte_tm_error_set(error,
+						EINVAL,
+						RTE_TM_ERROR_TYPE_WRED_PROFILE,
+						NULL,
+						rte_strerror(EINVAL));
+
 		if (min_th > max_th || max_th == 0)
 			return -rte_tm_error_set(error,
 				EINVAL,
-- 
1.8.3.1

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [dpdk-dev] [PATCH] ethdev: add support for WRED thresholds in bytes
  2018-02-20 13:30 [dpdk-dev] [PATCH] ethdev: add support for WRED thresholds in bytes Nikhil Rao
@ 2018-05-01 15:15 ` Dumitrescu, Cristian
  0 siblings, 0 replies; 2+ messages in thread
From: Dumitrescu, Cristian @ 2018-05-01 15:15 UTC (permalink / raw)
  To: Rao, Nikhil
  Cc: dev, Shelton, Benjamin H, Vangati, Narender, Gujjar, Abhinandan S



> -----Original Message-----
> From: Rao, Nikhil
> Sent: Tuesday, February 20, 2018 1:31 PM
> To: Dumitrescu, Cristian <cristian.dumitrescu@intel.com>
> Cc: dev@dpdk.org; Shelton, Benjamin H <benjamin.h.shelton@intel.com>;
> Vangati, Narender <narender.vangati@intel.com>; Gujjar, Abhinandan S
> <abhinandan.gujjar@intel.com>; Rao, Nikhil <nikhil.rao@intel.com>
> Subject: [PATCH] ethdev: add support for WRED thresholds in bytes
> 
> WRED thresholds can be specified in bytes if the TM leaf
> node supports it. Also extend WRED thresholds to 32 bits from 16.
> 
> TM capability (port/level/queue) fields
> cman_wred_packet_mode_supported and
> cman_wred_byte_mode_supported, when non-zero, indicate support for
> WRED
> thresholds in packets and bytes respectively.
> 
> The packet_mode member of struct rte_tm_wred_params, when non-zero,
> indicates that the min and max thresholds are specified in
> packets and when zero, indicates that the min and max thresholds
> are specified in bytes.
> 
> Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
> ---
> 
> Thanks to Cristian for his help with developing this patch.
> 
>  lib/librte_ether/rte_tm.h                | 53
> ++++++++++++++++++++++++++++++--
>  drivers/net/softnic/rte_eth_softnic_tm.c | 22 +++++++++++++
>  2 files changed, 73 insertions(+), 2 deletions(-)
> 
> diff --git a/lib/librte_ether/rte_tm.h b/lib/librte_ether/rte_tm.h
> index 2b25a87..23098ab 100644
> --- a/lib/librte_ether/rte_tm.h
> +++ b/lib/librte_ether/rte_tm.h
> @@ -377,6 +377,22 @@ struct rte_tm_capabilities {
>  	 */
>  	uint32_t sched_wfq_weight_max;
> 
> +	/** WRED packet mode support. When non-zero, this parameter
> indicates
> +	 * that there is atleast one leaf node that supports the WRED packet
> +	 * mode, which might not be true for all the leaf nodes. In packet
> +	 * mode, the WRED thresholds specify the queue length in packets,
> as
> +	 * opposed to bytes.
> +	 */
> +	int cman_wred_packet_mode_supported;
> +
> +	/** WRED byte mode support. When non-zero, this parameter
> indicates that
> +	 * there is atleast one leaf node that supports the WRED byte mode,
> +	 * which might not be true for all the leaf nodes. In byte mode, the
> +	 * WRED thresholds specify the queue length in bytes, as opposed to
> +	 * packets.
> +	 */
> +	int cman_wred_byte_mode_supported;
> +
>  	/** Head drop algorithm support. When non-zero, this parameter
>  	 * indicates that there is at least one leaf node that supports the
> head
>  	 * drop algorithm, which might not be true for all the leaf nodes.
> @@ -628,6 +644,24 @@ struct rte_tm_level_capabilities {
>  			 */
>  			uint32_t shaper_shared_n_max;
> 
> +			/** WRED packet mode support. When non-zero,
> this
> +			 * parameter indicates that there is atleast one leaf
> +			 * node on this level that supports the WRED packet
> +			 * mode, which might not be true for all the leaf
> +			 * nodes. In packet mode, the WRED thresholds
> specify
> +			 * the queue length in packets, as opposed to bytes.
> +			 */
> +			int cman_wred_packet_mode_supported;
> +
> +			/** WRED byte mode support. When non-zero, this
> +			 * parameter indicates that there is atleast one leaf
> +			 * node on this level that supports the WRED byte
> mode,
> +			 * which might not be true for all the leaf nodes. In
> +			 * byte mode, the WRED thresholds specify the
> queue
> +			 * length in bytes, as opposed to packets.
> +			 */
> +			int cman_wred_byte_mode_supported;
> +
>  			/** Head drop algorithm support. When non-zero,
> this
>  			 * parameter indicates that there is at least one leaf
>  			 * node on this level that supports the head drop
> @@ -743,6 +777,12 @@ struct rte_tm_node_capabilities {
> 
>  		/** Items valid only for leaf nodes. */
>  		struct {
> +			/** WRED packet mode support for current node. */
> +			int cman_wred_packet_mode_supported;
> +
> +			/** WRED byte mode support for current node. */
> +			int cman_wred_byte_mode_supported;
> +
>  			/** Head drop algorithm support for current node.
> */
>  			int cman_head_drop_supported;
> 
> @@ -791,10 +831,10 @@ enum rte_tm_cman_mode {
>   */
>  struct rte_tm_red_params {
>  	/** Minimum queue threshold */
> -	uint16_t min_th;
> +	uint32_t min_th;
> 
>  	/** Maximum queue threshold */
> -	uint16_t max_th;
> +	uint32_t max_th;
> 
>  	/** Inverse of packet marking probability maximum value (maxp),
> i.e.
>  	 * maxp_inv = 1 / maxp
> @@ -815,10 +855,19 @@ struct rte_tm_red_params {
>   * WRED context is used to perform congestion management for a single
> leaf
>   * node, while a shared WRED context is used to perform congestion
> management
>   * for a group of leaf nodes.
> + *
> + * @see struct rte_tm_capabilities::cman_wred_packet_mode_supported
> + * @see struct rte_tm_capabilities::cman_wred_byte_mode_supported
>   */
>  struct rte_tm_wred_params {
>  	/** One set of RED parameters per packet color */
>  	struct rte_tm_red_params red_params[RTE_TM_COLORS];
> +
> +	/** When non-zero, the *min_th* and *max_th* thresholds are
> specified
> +	 * in packets (WRED packet mode). When zero, the *min_th* and
> *max_th*
> +	 * thresholds are specified in bytes (WRED byte mode)
> +	 */
> +	int packet_mode;
>  };
> 
>  /**
> diff --git a/drivers/net/softnic/rte_eth_softnic_tm.c
> b/drivers/net/softnic/rte_eth_softnic_tm.c
> index 79f1c6a..e915c36 100644
> --- a/drivers/net/softnic/rte_eth_softnic_tm.c
> +++ b/drivers/net/softnic/rte_eth_softnic_tm.c
> @@ -479,6 +479,8 @@
>  	.sched_wfq_n_groups_max = 1,
>  	.sched_wfq_weight_max = UINT32_MAX,
> 
> +	.cman_wred_packet_mode_supported = WRED_SUPPORTED,
> +	.cman_wred_byte_mode_supported = 0,
>  	.cman_head_drop_supported = 0,
>  	.cman_wred_context_n_max = 0,
>  	.cman_wred_context_private_n_max = 0,
> @@ -667,6 +669,8 @@
>  			.shaper_shared_n_max = 0,
> 
>  			.cman_head_drop_supported = 0,
> +			.cman_wred_packet_mode_supported =
> WRED_SUPPORTED,
> +			.cman_wred_byte_mode_supported = 0,
>  			.cman_wred_context_private_supported =
> WRED_SUPPORTED,
>  			.cman_wred_context_shared_n_max = 0,
> 
> @@ -828,6 +832,8 @@
> 
>  		{.leaf = {
>  			.cman_head_drop_supported = 0,
> +			.cman_wred_packet_mode_supported =
> WRED_SUPPORTED,
> +			.cman_wred_byte_mode_supported = 0,
>  			.cman_wred_context_private_supported =
> WRED_SUPPORTED,
>  			.cman_wred_context_shared_n_max = 0,
>  		} },
> @@ -1226,6 +1232,14 @@
>  			NULL,
>  			rte_strerror(EINVAL));
> 
> +	/* WRED profile should be in packet mode */
> +	if (profile->packet_mode == 0)
> +		return -rte_tm_error_set(error,
> +			ENOTSUP,
> +			RTE_TM_ERROR_TYPE_WRED_PROFILE,
> +			NULL,
> +			rte_strerror(ENOTSUP));
> +
>  	/* WRED profile must not exist. */
>  	wp = tm_wred_profile_search(dev, wred_profile_id);
>  	if (wp)
> @@ -1248,6 +1262,14 @@
>  		uint16_t min_th = profile->red_params[color].min_th;
>  		uint16_t max_th = profile->red_params[color].max_th;
> 
> +		if (profile->red_params[color].min_th >= (1 << 16) ||
> +				profile->red_params[color].max_th >= (1 <<
> 16))
> +			return -rte_tm_error_set(error,
> +						EINVAL,
> +
> 	RTE_TM_ERROR_TYPE_WRED_PROFILE,
> +						NULL,
> +						rte_strerror(EINVAL));
> +
>  		if (min_th > max_th || max_th == 0)
>  			return -rte_tm_error_set(error,
>  				EINVAL,
> --
> 1.8.3.1

Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>

Applied to next-qos tree with some minor adjustments in file rte_eth_softnic_tm.c:
- moved check on profile->packet_mode after the check that profile is not NULL
- consolidated checks on min_th and max_th under a single block
- replaced 1 << 16 with UINT16_MAX

Thanks!

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2018-05-01 15:15 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-02-20 13:30 [dpdk-dev] [PATCH] ethdev: add support for WRED thresholds in bytes Nikhil Rao
2018-05-01 15:15 ` Dumitrescu, Cristian

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).