From: Marco Varlese <mvarlese@suse.de>
To: Hemant Agrawal <hemant.agrawal@nxp.com>, dev@dpdk.org
Subject: Re: [dpdk-dev] DPDK 18.02 on ARM64 is broken
Date: Thu, 22 Feb 2018 21:00:52 +0100 [thread overview]
Message-ID: <1519329652.2458.5.camel@suse.de> (raw)
In-Reply-To: <200ffaa2-0e91-8d09-821e-39d1e7a8b81b@nxp.com>
Dear Hemant,
On Thu, 2018-02-22 at 22:58 +0530, Hemant Agrawal wrote:
> Hi Marco/Gaetan,
>
> On 2/22/2018 7:53 PM, Marco Varlese wrote:
> > Hi,
> >
> > I am trying to build the latest DPDK (18.02) but facing some issues
> > on ARM64
> > platform.
> >
> > I'm using the option CONFIG_RTE_MAJOR_ABI to set the SONAME to
> > 18.02.
> >
>
> you mean you configured CONFIG_RTE_MAJOR_ABI=18.02, And did a SHARED
> build.
Right; however, the issue happens even by just using the SHARED
option... no need to have the RTE_MAJOR_ABI to reproduce.
> I am not seeing any error on my ubuntu m/c while doing shared build.
> May
> be I am missing something or it is different on suse.
The exact same issue was reproduced by Thomas Monjalon who very kindly
assisted me over #dpdk channel on IRC.
I don't think he runs openSUSE distribution; howevere, he could confirm
it just to be sure...
>
> > ===== START =====
> > The error is connected to building the librte_pmd_dpaa.so. Please,
> > see below:
> > [ 405s] /usr/lib64/gcc/aarch64-suse-linux/7/../../../../aarch64-
> > suse-
> > linux/bin/ld: warning: librte_bus_dpaa.so.18.02, needed by
> > /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so, not found (try using -rpath or
> > -rpath-link)
>
> can you check if "librte_bus_dpaa.so.18.02" is present in your
> build?
>
> This is similar to rte_pmd_ixgbe.so.18.02 having dependency on
> librte_bus_pci.so.18.02
>
> Are you using some rpm build script?
>
> > [ 405s] /usr/lib64/gcc/aarch64-suse-linux/7/../../../../aarch64-
> > suse-
> > linux/bin/ld: warning: librte_mempool_dpaa.so.18.02, needed by
> > /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so, not found (try using -rpath or
> > -rpath-link)
>
> This is similar to previous, can you check the presence of
> librte_mempool_dpaa.so.18.02
If you read my email fully, you'll see that I point out the fact that
the .so are built... just go down at the bottom of my previous email.
>
> regards,
> Hemant
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `fman_if_reset_mcast_filt
> > er_table@DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_alloc_
> > pool_range@DP
> > DK_18.02'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `rte_dpaa_po
> > rtal_init@DPD
> > K_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_add
> > _mac_addr@DPD
> > K_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_dis
> > able_rx@DPDK_
> > 17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `fman_if_set_fc_threshold
> > @DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_delete
> > _cgr@DPDK_18.
> > 02'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_create
> > _cgr@DPDK_18.
> > 02'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_dqrr_c
> > onsume@DPDK_1
> > 7.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_global
> > _init@DPDK_17
> > .11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `fman_if_promiscuous_disa
> > ble@DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `per_lcore_d
> > paa_io@DPDK_1
> > 8.02'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `dpaa_svr_fa
> > mily@DPDK_18.
> > 02'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_cle
> > ar_mac_addr@D
> > PDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_ena
> > ble_rx@DPDK_1
> > 7.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_init_f
> > q@DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `per_lcore_h
> > eld_bufs@DPDK
> > _18.02'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `dpaa_logtyp
> > e_pmd@DPDK_17
> > .11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_set
> > _maxfrm@DPDK_
> > 17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_sta
> > ts_get@DPDK_1
> > 7.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `fman_dealloc_bufs_mask_h
> > i@DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `fman_if_get_fc_threshold
> > @DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `fman_if_loopback_disable
> > @DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_dequeu
> > e@DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `dpaa_netcfg
> > @DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `fman_if_promiscuous_enab
> > le@DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `bman_acquir
> > e@DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `fman_if_set_mcast_filter
> > _table@DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `fman_if_discard_rx_error
> > s@DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_set_vd
> > q@DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `rte_dpaa_portal_fq_init@
> > DPDK_18.02'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_portal
> > _poll_rx@DPDK
> > _18.02'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_modify
> > _cgr@DPDK_18.
> > 02'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_create
> > _fq@DPDK_17.1
> > 1'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_query_
> > fq_frm_cnt@DP
> > DK_18.02'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `rte_dpaa_driver_register
> > @DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_ip_rev
> > @DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_get
> > _fc_quanta@DP
> > DK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_sta
> > ts_get_all@DP
> > DK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_enqueu
> > e_multi@DPDK_
> > 17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_set
> > _fdoff@DPDK_1
> > 7.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_set
> > _ic_params@DP
> > DK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_get
> > _fdoff@DPDK_1
> > 7.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `bman_global
> > _init@DPDK_17
> > .11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `qman_alloc_
> > cgrid_range@D
> > PDK_18.02'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `fman_if_loopback_enable@
> > DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_sta
> > ts_reset@DPDK
> > _17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_set
> > _bp@DPDK_17.1
> > 1'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `qman_reserve_fqid_range@
> > DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `qman_release_cgrid_range
> > @DPDK_18.02'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `fman_if_set
> > _fc_quanta@DP
> > DK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to
> > `fman_dealloc_bufs_mask_l
> > o@DPDK_17.11'
> > [ 405s] /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-
> > linuxapp-gcc-
> > default/lib/librte_pmd_dpaa.so: undefined reference to `rte_dpaa_bp
> > id_info@DPDK_
> > 17.11'
> > [ 405s] collect2: error: ld returned 1 exit status
> > ===== END =====
> >
> > Despite the error saying that the librte_mempool_dpaa.so.18.02
> > cannot be found,
> > I can see it being built somewhere earlier in the compilation
> > process. Please,
> > see below:
> > ===== START =====
> > [ 216s] gcc -DVERSION="18.02" -L/home/abuild/rpmbuild/BUILD/dpdk-
> > 18.02/arm64-
> > armv8a-linuxapp-gcc-default/lib -Wl,--version-
> > script=/home/abuild/rpmbuild/BUILD/dpdk-
> > 18.02/drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map -shared
> > dpaa2_hw_mempool.o -z defs -lrte_bus_fslmc -lrte_eal -lrte_mempool
> > -lrte_ring
> > -Wl,-soname,librte_mempool_dpaa2.so.18.02 -o
> > librte_mempool_dpaa2.so.18.02
> > [ 216s] gcc -DVERSION="18.02" -L/home/abuild/rpmbuild/BUILD/dpdk-
> > 18.02/arm64-
> > armv8a-linuxapp-gcc-default/lib -Wl,--version-
> > script=/home/abuild/rpmbuild/BUILD/dpdk-
> > 18.02/drivers/mempool/dpaa/rte_mempool_dpaa_version.map -shared
> > dpaa_mempool.o
> > -z defs -lrte_bus_dpaa -lrte_eal -lrte_mempool -lrte_ring -Wl,-
> > soname,librte_mempool_dpaa.so.18.02 -o librte_mempool_dpaa.so.18.02
> > [ 216s] INSTALL-LIB librte_mempool_dpaa2.so.18.02
> > [ 216s] cp -f librte_mempool_dpaa2.so.18.02
> > /home/abuild/rpmbuild/BUILD/dpdk-
> > 18.02/arm64-armv8a-linuxapp-gcc-default/lib
> > [ 216s] ln -s -f librte_mempool_dpaa2.so.18.02
> > /home/abuild/rpmbuild/BUILD/dpdk-18.02/arm64-armv8a-linuxapp-gcc-
> > default/lib/librte_mempool_dpaa2.so
> > [ 217s] INSTALL-LIB librte_mempool_dpaa.so.18.02
> > [ 217s] cp -f librte_mempool_dpaa.so.18.02
> > /home/abuild/rpmbuild/BUILD/dpdk-
> > 18.02/arm64-armv8a-linuxapp-gcc-default/lib
> > [ 217s] ln -s -f librte_mempool_dpaa.so.18.02
> > /home/abuild/rpmbuild/BUILD/dpdk-
> > 18.02/arm64-armv8a-linuxapp-gcc-default/lib/librte_mempool_dpaa.so
> > ===== END =====
> >
> >
> > Cheers,
> >
>
>
next prev parent reply other threads:[~2018-02-22 20:01 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-22 14:23 Marco Varlese
2018-02-22 14:33 ` Gaëtan Rivet
2018-02-22 17:28 ` Hemant Agrawal
2018-02-22 20:00 ` Marco Varlese [this message]
2018-02-22 22:53 ` [dpdk-dev] [PATCH 1/2] app/testpmd: fix DPAA shared library dependency Thomas Monjalon
2018-02-22 22:53 ` [dpdk-dev] [PATCH 2/2] mk: clean up static link with DPAA libraries Thomas Monjalon
2018-02-23 6:25 ` Hemant Agrawal
2018-02-23 9:25 ` Thomas Monjalon
2018-02-23 10:02 ` Hemant Agrawal
2018-02-23 5:15 ` [dpdk-dev] [PATCH 1/2] app/testpmd: fix DPAA shared library dependency Hemant Agrawal
2018-02-23 9:58 ` [dpdk-dev] [PATCH v2 " Hemant Agrawal
2018-02-23 9:58 ` [dpdk-dev] [PATCH v2 2/2] mk: fix the build dependency structure for dpaaX Hemant Agrawal
2018-03-13 23:36 ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1519329652.2458.5.camel@suse.de \
--to=mvarlese@suse.de \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).