From: Tomasz Duszynski <tdu@semihalf.com>
To: dev@dpdk.org
Cc: mw@semihalf.com, dima@marvell.com, nsamsono@marvell.com,
jck@semihalf.com, jianbo.liu@arm.com,
Tomasz Duszynski <tdu@semihalf.com>
Subject: [dpdk-dev] [PATCH v3 5/8] net/mrvl: add classifier support
Date: Thu, 15 Mar 2018 08:52:01 +0100 [thread overview]
Message-ID: <1521100324-26558-6-git-send-email-tdu@semihalf.com> (raw)
In-Reply-To: <1521100324-26558-1-git-send-email-tdu@semihalf.com>
Add classifier configuration support via rte_flow api.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
---
doc/guides/nics/mrvl.rst | 168 +++
drivers/net/mrvl/Makefile | 1 +
drivers/net/mrvl/mrvl_ethdev.c | 59 +
drivers/net/mrvl/mrvl_ethdev.h | 10 +
drivers/net/mrvl/mrvl_flow.c | 2759 ++++++++++++++++++++++++++++++++++++++++
5 files changed, 2997 insertions(+)
create mode 100644 drivers/net/mrvl/mrvl_flow.c
diff --git a/doc/guides/nics/mrvl.rst b/doc/guides/nics/mrvl.rst
index 6794cbb..9230d5e 100644
--- a/doc/guides/nics/mrvl.rst
+++ b/doc/guides/nics/mrvl.rst
@@ -113,6 +113,9 @@ Prerequisites
approval has been granted, library can be found by typing ``musdk`` in
the search box.
+ To get better understanding of the library one can consult documentation
+ available in the ``doc`` top level directory of the MUSDK sources.
+
MUSDK must be configured with the following features:
.. code-block:: console
@@ -318,6 +321,171 @@ the path to the MUSDK installation directory needs to be exported.
sed -ri 's,(MRVL_PMD=)n,\1y,' build/.config
make
+Flow API
+--------
+
+PPv2 offers packet classification capabilities via classifier engine which
+can be configured via generic flow API offered by DPDK.
+
+Supported flow actions
+~~~~~~~~~~~~~~~~~~~~~~
+
+Following flow action items are supported by the driver:
+
+* DROP
+* QUEUE
+
+Supported flow items
+~~~~~~~~~~~~~~~~~~~~
+
+Following flow items and their respective fields are supported by the driver:
+
+* ETH
+
+ * source MAC
+ * destination MAC
+ * ethertype
+
+* VLAN
+
+ * PCP
+ * VID
+
+* IPV4
+
+ * DSCP
+ * protocol
+ * source address
+ * destination address
+
+* IPV6
+
+ * flow label
+ * next header
+ * source address
+ * destination address
+
+* UDP
+
+ * source port
+ * destination port
+
+* TCP
+
+ * source port
+ * destination port
+
+Classifier match engine
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Classifier has an internal match engine which can be configured to
+operate in either exact or maskable mode.
+
+Mode is selected upon creation of the first unique flow rule as follows:
+
+* maskable, if key size is up to 8 bytes.
+* exact, otherwise, i.e for keys bigger than 8 bytes.
+
+Where the key size equals the number of bytes of all fields specified
+in the flow items.
+
+.. table:: Examples of key size calculation
+
+ +----------------------------------------------------------------------------+-------------------+-------------+
+ | Flow pattern | Key size in bytes | Used engine |
+ +============================================================================+===================+=============+
+ | ETH (destination MAC) / VLAN (VID) | 6 + 2 = 8 | Maskable |
+ +----------------------------------------------------------------------------+-------------------+-------------+
+ | VLAN (VID) / IPV4 (source address) | 2 + 4 = 6 | Maskable |
+ +----------------------------------------------------------------------------+-------------------+-------------+
+ | TCP (source port, destination port) | 2 + 2 = 4 | Maskable |
+ +----------------------------------------------------------------------------+-------------------+-------------+
+ | VLAN (priority) / IPV4 (source address) | 1 + 4 = 5 | Maskable |
+ +----------------------------------------------------------------------------+-------------------+-------------+
+ | IPV4 (destination address) / UDP (source port, destination port) | 6 + 2 + 2 = 10 | Exact |
+ +----------------------------------------------------------------------------+-------------------+-------------+
+ | VLAN (VID) / IPV6 (flow label, destination address) | 2 + 3 + 16 = 21 | Exact |
+ +----------------------------------------------------------------------------+-------------------+-------------+
+ | IPV4 (DSCP, source address, destination address) | 1 + 4 + 4 = 9 | Exact |
+ +----------------------------------------------------------------------------+-------------------+-------------+
+ | IPV6 (flow label, source address, destination address) | 3 + 16 + 16 = 35 | Exact |
+ +----------------------------------------------------------------------------+-------------------+-------------+
+
+From the user perspective maskable mode means that masks specified
+via flow rules are respected. In case of exact match mode, masks
+which do not provide exact matching (all bits masked) are ignored.
+
+If the flow matches more than one classifier rule the first
+(with the lowest index) matched takes precedence.
+
+Flow rules usage example
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Before proceeding run testpmd user application:
+
+.. code-block:: console
+
+ ./testpmd --vdev=net_mrvl,iface=eth0,iface=eth2 -c 3 -- -i --p 3 -a --disable-hw-vlan-strip
+
+Example #1
+^^^^^^^^^^
+
+.. code-block:: console
+
+ testpmd> flow create 0 ingress pattern eth src is 10:11:12:13:14:15 / end actions drop / end
+
+In this case key size is 6 bytes thus maskable type is selected. Testpmd
+will set mask to ff:ff:ff:ff:ff:ff i.e traffic explicitly matching
+above rule will be dropped.
+
+Example #2
+^^^^^^^^^^
+
+.. code-block:: console
+
+ testpmd> flow create 0 ingress pattern ipv4 src spec 10.10.10.0 src mask 255.255.255.0 / tcp src spec 0x10 src mask 0x10 / end action drop / end
+
+In this case key size is 8 bytes thus maskable type is selected.
+Flows which have IPv4 source addresses ranging from 10.10.10.0 to 10.10.10.255
+and tcp source port set to 16 will be dropped.
+
+Example #3
+^^^^^^^^^^
+
+.. code-block:: console
+
+ testpmd> flow create 0 ingress pattern vlan vid spec 0x10 vid mask 0x10 / ipv4 src spec 10.10.1.1 src mask 255.255.0.0 dst spec 11.11.11.1 dst mask 255.255.255.0 / end actions drop / end
+
+In this case key size is 10 bytes thus exact type is selected.
+Even though each item has partial mask set, masks will be ignored.
+As a result only flows with VID set to 16 and IPv4 source and destination
+addresses set to 10.10.1.1 and 11.11.11.1 respectively will be dropped.
+
+Limitations
+~~~~~~~~~~~
+
+Following limitations need to be taken into account while creating flow rules:
+
+* For IPv4 exact match type the key size must be up to 12 bytes.
+* For IPv6 exact match type the key size must be up to 36 bytes.
+* Following fields cannot be partially masked (all masks are treated as
+ if they were exact):
+
+ * ETH: ethertype
+ * VLAN: PCP, VID
+ * IPv4: protocol
+ * IPv6: next header
+ * TCP/UDP: source port, destination port
+
+* Only one classifier table can be created thus all rules in the table
+ have to match table format. Table format is set during creation of
+ the first unique flow rule.
+* Up to 5 fields can be specified per flow rule.
+* Up to 20 flow rules can be added.
+
+For additional information about classifier please consult
+``doc/musdk_cls_user_guide.txt``.
+
Usage Example
-------------
diff --git a/drivers/net/mrvl/Makefile b/drivers/net/mrvl/Makefile
index bd3a96a..31a8fda 100644
--- a/drivers/net/mrvl/Makefile
+++ b/drivers/net/mrvl/Makefile
@@ -37,5 +37,6 @@ LDLIBS += -lrte_bus_vdev
# library source files
SRCS-$(CONFIG_RTE_LIBRTE_MRVL_PMD) += mrvl_ethdev.c
SRCS-$(CONFIG_RTE_LIBRTE_MRVL_PMD) += mrvl_qos.c
+SRCS-$(CONFIG_RTE_LIBRTE_MRVL_PMD) += mrvl_flow.c
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/mrvl/mrvl_ethdev.c b/drivers/net/mrvl/mrvl_ethdev.c
index 7e00dbd..34b9ef7 100644
--- a/drivers/net/mrvl/mrvl_ethdev.c
+++ b/drivers/net/mrvl/mrvl_ethdev.c
@@ -659,6 +659,10 @@ mrvl_dev_stop(struct rte_eth_dev *dev)
mrvl_dev_set_link_down(dev);
mrvl_flush_rx_queues(dev);
mrvl_flush_tx_shadow_queues(dev);
+ if (priv->cls_tbl) {
+ pp2_cls_tbl_deinit(priv->cls_tbl);
+ priv->cls_tbl = NULL;
+ }
if (priv->qos_tbl) {
pp2_cls_qos_tbl_deinit(priv->qos_tbl);
priv->qos_tbl = NULL;
@@ -784,6 +788,9 @@ mrvl_promiscuous_enable(struct rte_eth_dev *dev)
if (!priv->ppio)
return;
+ if (priv->isolated)
+ return;
+
ret = pp2_ppio_set_promisc(priv->ppio, 1);
if (ret)
RTE_LOG(ERR, PMD, "Failed to enable promiscuous mode\n");
@@ -804,6 +811,9 @@ mrvl_allmulticast_enable(struct rte_eth_dev *dev)
if (!priv->ppio)
return;
+ if (priv->isolated)
+ return;
+
ret = pp2_ppio_set_mc_promisc(priv->ppio, 1);
if (ret)
RTE_LOG(ERR, PMD, "Failed enable all-multicast mode\n");
@@ -867,6 +877,9 @@ mrvl_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
if (!priv->ppio)
return;
+ if (priv->isolated)
+ return;
+
ret = pp2_ppio_remove_mac_addr(priv->ppio,
dev->data->mac_addrs[index].addr_bytes);
if (ret) {
@@ -899,6 +912,9 @@ mrvl_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
char buf[ETHER_ADDR_FMT_SIZE];
int ret;
+ if (priv->isolated)
+ return -ENOTSUP;
+
if (index == 0)
/* For setting index 0, mrvl_mac_addr_set() should be used.*/
return -1;
@@ -946,6 +962,9 @@ mrvl_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
if (!priv->ppio)
return;
+ if (priv->isolated)
+ return;
+
ret = pp2_ppio_set_mac_addr(priv->ppio, mac_addr->addr_bytes);
if (ret) {
char buf[ETHER_ADDR_FMT_SIZE];
@@ -1227,6 +1246,9 @@ mrvl_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
if (!priv->ppio)
return -EPERM;
+ if (priv->isolated)
+ return -ENOTSUP;
+
return on ? pp2_ppio_add_vlan(priv->ppio, vlan_id) :
pp2_ppio_remove_vlan(priv->ppio, vlan_id);
}
@@ -1580,6 +1602,9 @@ mrvl_rss_hash_update(struct rte_eth_dev *dev,
{
struct mrvl_priv *priv = dev->data->dev_private;
+ if (priv->isolated)
+ return -ENOTSUP;
+
return mrvl_configure_rss(priv, rss_conf);
}
@@ -1616,6 +1641,39 @@ mrvl_rss_hash_conf_get(struct rte_eth_dev *dev,
return 0;
}
+/**
+ * DPDK callback to get rte_flow callbacks.
+ *
+ * @param dev
+ * Pointer to the device structure.
+ * @param filer_type
+ * Flow filter type.
+ * @param filter_op
+ * Flow filter operation.
+ * @param arg
+ * Pointer to pass the flow ops.
+ *
+ * @return
+ * 0 on success, negative error value otherwise.
+ */
+static int
+mrvl_eth_filter_ctrl(struct rte_eth_dev *dev __rte_unused,
+ enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op, void *arg)
+{
+ switch (filter_type) {
+ case RTE_ETH_FILTER_GENERIC:
+ if (filter_op != RTE_ETH_FILTER_GET)
+ return -EINVAL;
+ *(const void **)arg = &mrvl_flow_ops;
+ return 0;
+ default:
+ RTE_LOG(WARNING, PMD, "Filter type (%d) not supported",
+ filter_type);
+ return -EINVAL;
+ }
+}
+
static const struct eth_dev_ops mrvl_ops = {
.dev_configure = mrvl_dev_configure,
.dev_start = mrvl_dev_start,
@@ -1645,6 +1703,7 @@ static const struct eth_dev_ops mrvl_ops = {
.tx_queue_release = mrvl_tx_queue_release,
.rss_hash_update = mrvl_rss_hash_update,
.rss_hash_conf_get = mrvl_rss_hash_conf_get,
+ .filter_ctrl = mrvl_eth_filter_ctrl
};
/**
diff --git a/drivers/net/mrvl/mrvl_ethdev.h b/drivers/net/mrvl/mrvl_ethdev.h
index 2cc229e..3a42809 100644
--- a/drivers/net/mrvl/mrvl_ethdev.h
+++ b/drivers/net/mrvl/mrvl_ethdev.h
@@ -8,6 +8,7 @@
#define _MRVL_ETHDEV_H_
#include <rte_spinlock.h>
+#include <rte_flow_driver.h>
#include <env/mv_autogen_comp_flags.h>
#include <drivers/mv_pp2.h>
@@ -80,12 +81,21 @@ struct mrvl_priv {
uint8_t rss_hf_tcp;
uint8_t uc_mc_flushed;
uint8_t vlan_flushed;
+ uint8_t isolated;
struct pp2_ppio_params ppio_params;
struct pp2_cls_qos_tbl_params qos_tbl_params;
struct pp2_cls_tbl *qos_tbl;
uint16_t nb_rx_queues;
+
+ struct pp2_cls_tbl_params cls_tbl_params;
+ struct pp2_cls_tbl *cls_tbl;
+ uint32_t cls_tbl_pattern;
+ LIST_HEAD(mrvl_flows, rte_flow) flows;
+
struct pp2_cls_plcr *policer;
};
+/** Flow operations forward declaration. */
+extern const struct rte_flow_ops mrvl_flow_ops;
#endif /* _MRVL_ETHDEV_H_ */
diff --git a/drivers/net/mrvl/mrvl_flow.c b/drivers/net/mrvl/mrvl_flow.c
new file mode 100644
index 0000000..8fd4dbf
--- /dev/null
+++ b/drivers/net/mrvl/mrvl_flow.c
@@ -0,0 +1,2759 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Marvell International Ltd.
+ * Copyright(c) 2018 Semihalf.
+ * All rights reserved.
+ */
+
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+#include <rte_malloc.h>
+#include <rte_log.h>
+
+#include <arpa/inet.h>
+
+#ifdef container_of
+#undef container_of
+#endif
+
+#include "mrvl_ethdev.h"
+#include "mrvl_qos.h"
+#include "env/mv_common.h" /* for BIT() */
+
+/** Number of rules in the classifier table. */
+#define MRVL_CLS_MAX_NUM_RULES 20
+
+/** Size of the classifier key and mask strings. */
+#define MRVL_CLS_STR_SIZE_MAX 40
+
+/** Parsed fields in processed rte_flow_item. */
+enum mrvl_parsed_fields {
+ /* eth flags */
+ F_DMAC = BIT(0),
+ F_SMAC = BIT(1),
+ F_TYPE = BIT(2),
+ /* vlan flags */
+ F_VLAN_ID = BIT(3),
+ F_VLAN_PRI = BIT(4),
+ F_VLAN_TCI = BIT(5), /* not supported by MUSDK yet */
+ /* ip4 flags */
+ F_IP4_TOS = BIT(6),
+ F_IP4_SIP = BIT(7),
+ F_IP4_DIP = BIT(8),
+ F_IP4_PROTO = BIT(9),
+ /* ip6 flags */
+ F_IP6_TC = BIT(10), /* not supported by MUSDK yet */
+ F_IP6_SIP = BIT(11),
+ F_IP6_DIP = BIT(12),
+ F_IP6_FLOW = BIT(13),
+ F_IP6_NEXT_HDR = BIT(14),
+ /* tcp flags */
+ F_TCP_SPORT = BIT(15),
+ F_TCP_DPORT = BIT(16),
+ /* udp flags */
+ F_UDP_SPORT = BIT(17),
+ F_UDP_DPORT = BIT(18),
+};
+
+/** PMD-specific definition of a flow rule handle. */
+struct rte_flow {
+ LIST_ENTRY(rte_flow) next;
+
+ enum mrvl_parsed_fields pattern;
+
+ struct pp2_cls_tbl_rule rule;
+ struct pp2_cls_cos_desc cos;
+ struct pp2_cls_tbl_action action;
+};
+
+static const enum rte_flow_item_type pattern_eth[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_eth_vlan[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_eth_vlan_ip[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_IPV4,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_eth_vlan_ip6[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_IPV6,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_eth_ip4[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_IPV4,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_eth_ip4_tcp[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_IPV4,
+ RTE_FLOW_ITEM_TYPE_TCP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_eth_ip4_udp[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_IPV4,
+ RTE_FLOW_ITEM_TYPE_UDP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_eth_ip6[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_IPV6,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_eth_ip6_tcp[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_IPV6,
+ RTE_FLOW_ITEM_TYPE_TCP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_eth_ip6_udp[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_IPV6,
+ RTE_FLOW_ITEM_TYPE_UDP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_vlan[] = {
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_vlan_ip[] = {
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_IPV4,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_vlan_ip_tcp[] = {
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_IPV4,
+ RTE_FLOW_ITEM_TYPE_TCP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_vlan_ip_udp[] = {
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_IPV4,
+ RTE_FLOW_ITEM_TYPE_UDP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_vlan_ip6[] = {
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_IPV6,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_vlan_ip6_tcp[] = {
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_IPV6,
+ RTE_FLOW_ITEM_TYPE_TCP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_vlan_ip6_udp[] = {
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_IPV6,
+ RTE_FLOW_ITEM_TYPE_UDP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_ip[] = {
+ RTE_FLOW_ITEM_TYPE_IPV4,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_ip6[] = {
+ RTE_FLOW_ITEM_TYPE_IPV6,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_ip_tcp[] = {
+ RTE_FLOW_ITEM_TYPE_IPV4,
+ RTE_FLOW_ITEM_TYPE_TCP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_ip6_tcp[] = {
+ RTE_FLOW_ITEM_TYPE_IPV6,
+ RTE_FLOW_ITEM_TYPE_TCP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_ip_udp[] = {
+ RTE_FLOW_ITEM_TYPE_IPV4,
+ RTE_FLOW_ITEM_TYPE_UDP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_ip6_udp[] = {
+ RTE_FLOW_ITEM_TYPE_IPV6,
+ RTE_FLOW_ITEM_TYPE_UDP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_tcp[] = {
+ RTE_FLOW_ITEM_TYPE_TCP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+static const enum rte_flow_item_type pattern_udp[] = {
+ RTE_FLOW_ITEM_TYPE_UDP,
+ RTE_FLOW_ITEM_TYPE_END
+};
+
+#define MRVL_VLAN_ID_MASK 0x0fff
+#define MRVL_VLAN_PRI_MASK 0x7000
+#define MRVL_IPV4_DSCP_MASK 0xfc
+#define MRVL_IPV4_ADDR_MASK 0xffffffff
+#define MRVL_IPV6_FLOW_MASK 0x0fffff
+
+/**
+ * Given a flow item, return the next non-void one.
+ *
+ * @param items Pointer to the item in the table.
+ * @returns Next not-void item, NULL otherwise.
+ */
+static const struct rte_flow_item *
+mrvl_next_item(const struct rte_flow_item *items)
+{
+ const struct rte_flow_item *item = items;
+
+ for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
+ if (item->type != RTE_FLOW_ITEM_TYPE_VOID)
+ return item;
+ }
+
+ return NULL;
+}
+
+/**
+ * Allocate memory for classifier rule key and mask fields.
+ *
+ * @param field Pointer to the classifier rule.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_alloc_key_mask(struct pp2_cls_rule_key_field *field)
+{
+ unsigned int id = rte_socket_id();
+
+ field->key = rte_zmalloc_socket(NULL, MRVL_CLS_STR_SIZE_MAX, 0, id);
+ if (!field->key)
+ goto out;
+
+ field->mask = rte_zmalloc_socket(NULL, MRVL_CLS_STR_SIZE_MAX, 0, id);
+ if (!field->mask)
+ goto out_mask;
+
+ return 0;
+out_mask:
+ rte_free(field->key);
+out:
+ field->key = NULL;
+ field->mask = NULL;
+ return -1;
+}
+
+/**
+ * Free memory allocated for classifier rule key and mask fields.
+ *
+ * @param field Pointer to the classifier rule.
+ */
+static void
+mrvl_free_key_mask(struct pp2_cls_rule_key_field *field)
+{
+ rte_free(field->key);
+ rte_free(field->mask);
+ field->key = NULL;
+ field->mask = NULL;
+}
+
+/**
+ * Free memory allocated for all classifier rule key and mask fields.
+ *
+ * @param rule Pointer to the classifier table rule.
+ */
+static void
+mrvl_free_all_key_mask(struct pp2_cls_tbl_rule *rule)
+{
+ int i;
+
+ for (i = 0; i < rule->num_fields; i++)
+ mrvl_free_key_mask(&rule->fields[i]);
+ rule->num_fields = 0;
+}
+
+/*
+ * Initialize rte flow item parsing.
+ *
+ * @param item Pointer to the flow item.
+ * @param spec_ptr Pointer to the specific item pointer.
+ * @param mask_ptr Pointer to the specific item's mask pointer.
+ * @def_mask Pointer to the default mask.
+ * @size Size of the flow item.
+ * @error Pointer to the rte flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_init(const struct rte_flow_item *item,
+ const void **spec_ptr,
+ const void **mask_ptr,
+ const void *def_mask,
+ unsigned int size,
+ struct rte_flow_error *error)
+{
+ const uint8_t *spec;
+ const uint8_t *mask;
+ const uint8_t *last;
+ uint8_t zeros[size];
+
+ memset(zeros, 0, size);
+
+ if (item == NULL) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, NULL,
+ "NULL item\n");
+ return -rte_errno;
+ }
+
+ if ((item->last != NULL || item->mask != NULL) && item->spec == NULL) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "Mask or last is set without spec\n");
+ return -rte_errno;
+ }
+
+ /*
+ * If "mask" is not set, default mask is used,
+ * but if default mask is NULL, "mask" should be set.
+ */
+ if (item->mask == NULL) {
+ if (def_mask == NULL) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, NULL,
+ "Mask should be specified\n");
+ return -rte_errno;
+ }
+
+ mask = (const uint8_t *)def_mask;
+ } else {
+ mask = (const uint8_t *)item->mask;
+ }
+
+ spec = (const uint8_t *)item->spec;
+ last = (const uint8_t *)item->last;
+
+ if (spec == NULL) {
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL, "Spec should be specified\n");
+ return -rte_errno;
+ }
+
+ /*
+ * If field values in "last" are either 0 or equal to the corresponding
+ * values in "spec" then they are ignored.
+ */
+ if (last != NULL &&
+ !memcmp(last, zeros, size) &&
+ memcmp(last, spec, size) != 0) {
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, NULL,
+ "Ranging is not supported\n");
+ return -rte_errno;
+ }
+
+ *spec_ptr = spec;
+ *mask_ptr = mask;
+
+ return 0;
+}
+
+/**
+ * Parse the eth flow item.
+ *
+ * This will create classifier rule that matches either destination or source
+ * mac.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param mask Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static int
+mrvl_parse_mac(const struct rte_flow_item_eth *spec,
+ const struct rte_flow_item_eth *mask,
+ int parse_dst, struct rte_flow *flow)
+{
+ struct pp2_cls_rule_key_field *key_field;
+ const uint8_t *k, *m;
+
+ if (flow->rule.num_fields >= PP2_CLS_TBL_MAX_NUM_FIELDS)
+ return -ENOSPC;
+
+ if (parse_dst) {
+ k = spec->dst.addr_bytes;
+ m = mask->dst.addr_bytes;
+
+ flow->pattern |= F_DMAC;
+ } else {
+ k = spec->src.addr_bytes;
+ m = mask->src.addr_bytes;
+
+ flow->pattern |= F_SMAC;
+ }
+
+ key_field = &flow->rule.fields[flow->rule.num_fields];
+ mrvl_alloc_key_mask(key_field);
+ key_field->size = 6;
+
+ snprintf((char *)key_field->key, MRVL_CLS_STR_SIZE_MAX,
+ "%02x:%02x:%02x:%02x:%02x:%02x",
+ k[0], k[1], k[2], k[3], k[4], k[5]);
+
+ snprintf((char *)key_field->mask, MRVL_CLS_STR_SIZE_MAX,
+ "%02x:%02x:%02x:%02x:%02x:%02x",
+ m[0], m[1], m[2], m[3], m[4], m[5]);
+
+ flow->rule.num_fields += 1;
+
+ return 0;
+}
+
+/**
+ * Helper for parsing the eth flow item destination mac address.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static inline int
+mrvl_parse_dmac(const struct rte_flow_item_eth *spec,
+ const struct rte_flow_item_eth *mask,
+ struct rte_flow *flow)
+{
+ return mrvl_parse_mac(spec, mask, 1, flow);
+}
+
+/**
+ * Helper for parsing the eth flow item source mac address.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static inline int
+mrvl_parse_smac(const struct rte_flow_item_eth *spec,
+ const struct rte_flow_item_eth *mask,
+ struct rte_flow *flow)
+{
+ return mrvl_parse_mac(spec, mask, 0, flow);
+}
+
+/**
+ * Parse the ether type field of the eth flow item.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static int
+mrvl_parse_type(const struct rte_flow_item_eth *spec,
+ const struct rte_flow_item_eth *mask __rte_unused,
+ struct rte_flow *flow)
+{
+ struct pp2_cls_rule_key_field *key_field;
+ uint16_t k;
+
+ if (flow->rule.num_fields >= PP2_CLS_TBL_MAX_NUM_FIELDS)
+ return -ENOSPC;
+
+ key_field = &flow->rule.fields[flow->rule.num_fields];
+ mrvl_alloc_key_mask(key_field);
+ key_field->size = 2;
+
+ k = rte_be_to_cpu_16(spec->type);
+ snprintf((char *)key_field->key, MRVL_CLS_STR_SIZE_MAX, "%u", k);
+
+ flow->pattern |= F_TYPE;
+ flow->rule.num_fields += 1;
+
+ return 0;
+}
+
+/**
+ * Parse the vid field of the vlan rte flow item.
+ *
+ * This will create classifier rule that matches vid.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static int
+mrvl_parse_vlan_id(const struct rte_flow_item_vlan *spec,
+ const struct rte_flow_item_vlan *mask __rte_unused,
+ struct rte_flow *flow)
+{
+ struct pp2_cls_rule_key_field *key_field;
+ uint16_t k;
+
+ if (flow->rule.num_fields >= PP2_CLS_TBL_MAX_NUM_FIELDS)
+ return -ENOSPC;
+
+ key_field = &flow->rule.fields[flow->rule.num_fields];
+ mrvl_alloc_key_mask(key_field);
+ key_field->size = 2;
+
+ k = rte_be_to_cpu_16(spec->tci) & MRVL_VLAN_ID_MASK;
+ snprintf((char *)key_field->key, MRVL_CLS_STR_SIZE_MAX, "%u", k);
+
+ flow->pattern |= F_VLAN_ID;
+ flow->rule.num_fields += 1;
+
+ return 0;
+}
+
+/**
+ * Parse the pri field of the vlan rte flow item.
+ *
+ * This will create classifier rule that matches pri.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static int
+mrvl_parse_vlan_pri(const struct rte_flow_item_vlan *spec,
+ const struct rte_flow_item_vlan *mask __rte_unused,
+ struct rte_flow *flow)
+{
+ struct pp2_cls_rule_key_field *key_field;
+ uint16_t k;
+
+ if (flow->rule.num_fields >= PP2_CLS_TBL_MAX_NUM_FIELDS)
+ return -ENOSPC;
+
+ key_field = &flow->rule.fields[flow->rule.num_fields];
+ mrvl_alloc_key_mask(key_field);
+ key_field->size = 1;
+
+ k = (rte_be_to_cpu_16(spec->tci) & MRVL_VLAN_PRI_MASK) >> 13;
+ snprintf((char *)key_field->key, MRVL_CLS_STR_SIZE_MAX, "%u", k);
+
+ flow->pattern |= F_VLAN_PRI;
+ flow->rule.num_fields += 1;
+
+ return 0;
+}
+
+/**
+ * Parse the dscp field of the ipv4 rte flow item.
+ *
+ * This will create classifier rule that matches dscp field.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static int
+mrvl_parse_ip4_dscp(const struct rte_flow_item_ipv4 *spec,
+ const struct rte_flow_item_ipv4 *mask,
+ struct rte_flow *flow)
+{
+ struct pp2_cls_rule_key_field *key_field;
+ uint8_t k, m;
+
+ if (flow->rule.num_fields >= PP2_CLS_TBL_MAX_NUM_FIELDS)
+ return -ENOSPC;
+
+ key_field = &flow->rule.fields[flow->rule.num_fields];
+ mrvl_alloc_key_mask(key_field);
+ key_field->size = 1;
+
+ k = (spec->hdr.type_of_service & MRVL_IPV4_DSCP_MASK) >> 2;
+ m = (mask->hdr.type_of_service & MRVL_IPV4_DSCP_MASK) >> 2;
+ snprintf((char *)key_field->key, MRVL_CLS_STR_SIZE_MAX, "%u", k);
+ snprintf((char *)key_field->mask, MRVL_CLS_STR_SIZE_MAX, "%u", m);
+
+ flow->pattern |= F_IP4_TOS;
+ flow->rule.num_fields += 1;
+
+ return 0;
+}
+
+/**
+ * Parse either source or destination ip addresses of the ipv4 flow item.
+ *
+ * This will create classifier rule that matches either destination
+ * or source ip field.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static int
+mrvl_parse_ip4_addr(const struct rte_flow_item_ipv4 *spec,
+ const struct rte_flow_item_ipv4 *mask,
+ int parse_dst, struct rte_flow *flow)
+{
+ struct pp2_cls_rule_key_field *key_field;
+ struct in_addr k;
+ uint32_t m;
+
+ if (flow->rule.num_fields >= PP2_CLS_TBL_MAX_NUM_FIELDS)
+ return -ENOSPC;
+
+ memset(&k, 0, sizeof(k));
+ if (parse_dst) {
+ k.s_addr = spec->hdr.dst_addr;
+ m = rte_be_to_cpu_32(mask->hdr.dst_addr);
+
+ flow->pattern |= F_IP4_DIP;
+ } else {
+ k.s_addr = spec->hdr.src_addr;
+ m = rte_be_to_cpu_32(mask->hdr.src_addr);
+
+ flow->pattern |= F_IP4_SIP;
+ }
+
+ key_field = &flow->rule.fields[flow->rule.num_fields];
+ mrvl_alloc_key_mask(key_field);
+ key_field->size = 4;
+
+ inet_ntop(AF_INET, &k, (char *)key_field->key, MRVL_CLS_STR_SIZE_MAX);
+ snprintf((char *)key_field->mask, MRVL_CLS_STR_SIZE_MAX, "0x%x", m);
+
+ flow->rule.num_fields += 1;
+
+ return 0;
+}
+
+/**
+ * Helper for parsing destination ip of the ipv4 flow item.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static inline int
+mrvl_parse_ip4_dip(const struct rte_flow_item_ipv4 *spec,
+ const struct rte_flow_item_ipv4 *mask,
+ struct rte_flow *flow)
+{
+ return mrvl_parse_ip4_addr(spec, mask, 1, flow);
+}
+
+/**
+ * Helper for parsing source ip of the ipv4 flow item.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static inline int
+mrvl_parse_ip4_sip(const struct rte_flow_item_ipv4 *spec,
+ const struct rte_flow_item_ipv4 *mask,
+ struct rte_flow *flow)
+{
+ return mrvl_parse_ip4_addr(spec, mask, 0, flow);
+}
+
+/**
+ * Parse the proto field of the ipv4 rte flow item.
+ *
+ * This will create classifier rule that matches proto field.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static int
+mrvl_parse_ip4_proto(const struct rte_flow_item_ipv4 *spec,
+ const struct rte_flow_item_ipv4 *mask __rte_unused,
+ struct rte_flow *flow)
+{
+ struct pp2_cls_rule_key_field *key_field;
+ uint8_t k = spec->hdr.next_proto_id;
+
+ if (flow->rule.num_fields >= PP2_CLS_TBL_MAX_NUM_FIELDS)
+ return -ENOSPC;
+
+ key_field = &flow->rule.fields[flow->rule.num_fields];
+ mrvl_alloc_key_mask(key_field);
+ key_field->size = 1;
+
+ snprintf((char *)key_field->key, MRVL_CLS_STR_SIZE_MAX, "%u", k);
+
+ flow->pattern |= F_IP4_PROTO;
+ flow->rule.num_fields += 1;
+
+ return 0;
+}
+
+/**
+ * Parse either source or destination ip addresses of the ipv6 rte flow item.
+ *
+ * This will create classifier rule that matches either destination
+ * or source ip field.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static int
+mrvl_parse_ip6_addr(const struct rte_flow_item_ipv6 *spec,
+ const struct rte_flow_item_ipv6 *mask,
+ int parse_dst, struct rte_flow *flow)
+{
+ struct pp2_cls_rule_key_field *key_field;
+ int size = sizeof(spec->hdr.dst_addr);
+ struct in6_addr k, m;
+
+ if (flow->rule.num_fields >= PP2_CLS_TBL_MAX_NUM_FIELDS)
+ return -ENOSPC;
+
+ memset(&k, 0, sizeof(k));
+ if (parse_dst) {
+ memcpy(k.s6_addr, spec->hdr.dst_addr, size);
+ memcpy(m.s6_addr, mask->hdr.dst_addr, size);
+
+ flow->pattern |= F_IP6_DIP;
+ } else {
+ memcpy(k.s6_addr, spec->hdr.src_addr, size);
+ memcpy(m.s6_addr, mask->hdr.src_addr, size);
+
+ flow->pattern |= F_IP6_SIP;
+ }
+
+ key_field = &flow->rule.fields[flow->rule.num_fields];
+ mrvl_alloc_key_mask(key_field);
+ key_field->size = 16;
+
+ inet_ntop(AF_INET6, &k, (char *)key_field->key, MRVL_CLS_STR_SIZE_MAX);
+ inet_ntop(AF_INET6, &m, (char *)key_field->mask, MRVL_CLS_STR_SIZE_MAX);
+
+ flow->rule.num_fields += 1;
+
+ return 0;
+}
+
+/**
+ * Helper for parsing destination ip of the ipv6 flow item.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static inline int
+mrvl_parse_ip6_dip(const struct rte_flow_item_ipv6 *spec,
+ const struct rte_flow_item_ipv6 *mask,
+ struct rte_flow *flow)
+{
+ return mrvl_parse_ip6_addr(spec, mask, 1, flow);
+}
+
+/**
+ * Helper for parsing source ip of the ipv6 flow item.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static inline int
+mrvl_parse_ip6_sip(const struct rte_flow_item_ipv6 *spec,
+ const struct rte_flow_item_ipv6 *mask,
+ struct rte_flow *flow)
+{
+ return mrvl_parse_ip6_addr(spec, mask, 0, flow);
+}
+
+/**
+ * Parse the flow label of the ipv6 flow item.
+ *
+ * This will create classifier rule that matches flow field.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static int
+mrvl_parse_ip6_flow(const struct rte_flow_item_ipv6 *spec,
+ const struct rte_flow_item_ipv6 *mask,
+ struct rte_flow *flow)
+{
+ struct pp2_cls_rule_key_field *key_field;
+ uint32_t k = rte_be_to_cpu_32(spec->hdr.vtc_flow) & MRVL_IPV6_FLOW_MASK,
+ m = rte_be_to_cpu_32(mask->hdr.vtc_flow) & MRVL_IPV6_FLOW_MASK;
+
+ if (flow->rule.num_fields >= PP2_CLS_TBL_MAX_NUM_FIELDS)
+ return -ENOSPC;
+
+ key_field = &flow->rule.fields[flow->rule.num_fields];
+ mrvl_alloc_key_mask(key_field);
+ key_field->size = 3;
+
+ snprintf((char *)key_field->key, MRVL_CLS_STR_SIZE_MAX, "%u", k);
+ snprintf((char *)key_field->mask, MRVL_CLS_STR_SIZE_MAX, "%u", m);
+
+ flow->pattern |= F_IP6_FLOW;
+ flow->rule.num_fields += 1;
+
+ return 0;
+}
+
+/**
+ * Parse the next header of the ipv6 flow item.
+ *
+ * This will create classifier rule that matches next header field.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static int
+mrvl_parse_ip6_next_hdr(const struct rte_flow_item_ipv6 *spec,
+ const struct rte_flow_item_ipv6 *mask __rte_unused,
+ struct rte_flow *flow)
+{
+ struct pp2_cls_rule_key_field *key_field;
+ uint8_t k = spec->hdr.proto;
+
+ if (flow->rule.num_fields >= PP2_CLS_TBL_MAX_NUM_FIELDS)
+ return -ENOSPC;
+
+ key_field = &flow->rule.fields[flow->rule.num_fields];
+ mrvl_alloc_key_mask(key_field);
+ key_field->size = 1;
+
+ snprintf((char *)key_field->key, MRVL_CLS_STR_SIZE_MAX, "%u", k);
+
+ flow->pattern |= F_IP6_NEXT_HDR;
+ flow->rule.num_fields += 1;
+
+ return 0;
+}
+
+/**
+ * Parse destination or source port of the tcp flow item.
+ *
+ * This will create classifier rule that matches either destination or
+ * source tcp port.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static int
+mrvl_parse_tcp_port(const struct rte_flow_item_tcp *spec,
+ const struct rte_flow_item_tcp *mask __rte_unused,
+ int parse_dst, struct rte_flow *flow)
+{
+ struct pp2_cls_rule_key_field *key_field;
+ uint16_t k;
+
+ if (flow->rule.num_fields >= PP2_CLS_TBL_MAX_NUM_FIELDS)
+ return -ENOSPC;
+
+ key_field = &flow->rule.fields[flow->rule.num_fields];
+ mrvl_alloc_key_mask(key_field);
+ key_field->size = 2;
+
+ if (parse_dst) {
+ k = rte_be_to_cpu_16(spec->hdr.dst_port);
+
+ flow->pattern |= F_TCP_DPORT;
+ } else {
+ k = rte_be_to_cpu_16(spec->hdr.src_port);
+
+ flow->pattern |= F_TCP_SPORT;
+ }
+
+ snprintf((char *)key_field->key, MRVL_CLS_STR_SIZE_MAX, "%u", k);
+
+ flow->rule.num_fields += 1;
+
+ return 0;
+}
+
+/**
+ * Helper for parsing the tcp source port of the tcp flow item.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static inline int
+mrvl_parse_tcp_sport(const struct rte_flow_item_tcp *spec,
+ const struct rte_flow_item_tcp *mask,
+ struct rte_flow *flow)
+{
+ return mrvl_parse_tcp_port(spec, mask, 0, flow);
+}
+
+/**
+ * Helper for parsing the tcp destination port of the tcp flow item.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static inline int
+mrvl_parse_tcp_dport(const struct rte_flow_item_tcp *spec,
+ const struct rte_flow_item_tcp *mask,
+ struct rte_flow *flow)
+{
+ return mrvl_parse_tcp_port(spec, mask, 1, flow);
+}
+
+/**
+ * Parse destination or source port of the udp flow item.
+ *
+ * This will create classifier rule that matches either destination or
+ * source udp port.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static int
+mrvl_parse_udp_port(const struct rte_flow_item_udp *spec,
+ const struct rte_flow_item_udp *mask __rte_unused,
+ int parse_dst, struct rte_flow *flow)
+{
+ struct pp2_cls_rule_key_field *key_field;
+ uint16_t k;
+
+ if (flow->rule.num_fields >= PP2_CLS_TBL_MAX_NUM_FIELDS)
+ return -ENOSPC;
+
+ key_field = &flow->rule.fields[flow->rule.num_fields];
+ mrvl_alloc_key_mask(key_field);
+ key_field->size = 2;
+
+ if (parse_dst) {
+ k = rte_be_to_cpu_16(spec->hdr.dst_port);
+
+ flow->pattern |= F_UDP_DPORT;
+ } else {
+ k = rte_be_to_cpu_16(spec->hdr.src_port);
+
+ flow->pattern |= F_UDP_SPORT;
+ }
+
+ snprintf((char *)key_field->key, MRVL_CLS_STR_SIZE_MAX, "%u", k);
+
+ flow->rule.num_fields += 1;
+
+ return 0;
+}
+
+/**
+ * Helper for parsing the udp source port of the udp flow item.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static inline int
+mrvl_parse_udp_sport(const struct rte_flow_item_udp *spec,
+ const struct rte_flow_item_udp *mask,
+ struct rte_flow *flow)
+{
+ return mrvl_parse_udp_port(spec, mask, 0, flow);
+}
+
+/**
+ * Helper for parsing the udp destination port of the udp flow item.
+ *
+ * @param spec Pointer to the specific flow item.
+ * @param mask Pointer to the specific flow item's mask.
+ * @param flow Pointer to the flow.
+ * @return 0 in case of success, negative error value otherwise.
+ */
+static inline int
+mrvl_parse_udp_dport(const struct rte_flow_item_udp *spec,
+ const struct rte_flow_item_udp *mask,
+ struct rte_flow *flow)
+{
+ return mrvl_parse_udp_port(spec, mask, 1, flow);
+}
+
+/**
+ * Parse eth flow item.
+ *
+ * @param item Pointer to the flow item.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param fields Pointer to the parsed parsed fields enum.
+ * @returns 0 on success, negative value otherwise.
+ */
+static int
+mrvl_parse_eth(const struct rte_flow_item *item, struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_eth *spec = NULL, *mask = NULL;
+ struct ether_addr zero;
+ int ret;
+
+ ret = mrvl_parse_init(item, (const void **)&spec, (const void **)&mask,
+ &rte_flow_item_eth_mask,
+ sizeof(struct rte_flow_item_eth), error);
+ if (ret)
+ return ret;
+
+ memset(&zero, 0, sizeof(zero));
+
+ if (memcmp(&mask->dst, &zero, sizeof(mask->dst))) {
+ ret = mrvl_parse_dmac(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ if (memcmp(&mask->src, &zero, sizeof(mask->src))) {
+ ret = mrvl_parse_smac(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ if (mask->type) {
+ RTE_LOG(WARNING, PMD, "eth type mask is ignored\n");
+ ret = mrvl_parse_type(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ return 0;
+out:
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Reached maximum number of fields in cls tbl key\n");
+ return -rte_errno;
+}
+
+/**
+ * Parse vlan flow item.
+ *
+ * @param item Pointer to the flow item.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param fields Pointer to the parsed parsed fields enum.
+ * @returns 0 on success, negative value otherwise.
+ */
+static int
+mrvl_parse_vlan(const struct rte_flow_item *item,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_vlan *spec = NULL, *mask = NULL;
+ uint16_t m;
+ int ret;
+
+ ret = mrvl_parse_init(item, (const void **)&spec, (const void **)&mask,
+ &rte_flow_item_vlan_mask,
+ sizeof(struct rte_flow_item_vlan), error);
+ if (ret)
+ return ret;
+
+ if (mask->tpid) {
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL, "Not supported by classifier\n");
+ return -rte_errno;
+ }
+
+ m = rte_be_to_cpu_16(mask->tci);
+ if (m & MRVL_VLAN_ID_MASK) {
+ RTE_LOG(WARNING, PMD, "vlan id mask is ignored\n");
+ ret = mrvl_parse_vlan_id(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ if (m & MRVL_VLAN_PRI_MASK) {
+ RTE_LOG(WARNING, PMD, "vlan pri mask is ignored\n");
+ ret = mrvl_parse_vlan_pri(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ return 0;
+out:
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Reached maximum number of fields in cls tbl key\n");
+ return -rte_errno;
+}
+
+/**
+ * Parse ipv4 flow item.
+ *
+ * @param item Pointer to the flow item.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param fields Pointer to the parsed parsed fields enum.
+ * @returns 0 on success, negative value otherwise.
+ */
+static int
+mrvl_parse_ip4(const struct rte_flow_item *item,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv4 *spec = NULL, *mask = NULL;
+ int ret;
+
+ ret = mrvl_parse_init(item, (const void **)&spec, (const void **)&mask,
+ &rte_flow_item_ipv4_mask,
+ sizeof(struct rte_flow_item_ipv4), error);
+ if (ret)
+ return ret;
+
+ if (mask->hdr.version_ihl ||
+ mask->hdr.total_length ||
+ mask->hdr.packet_id ||
+ mask->hdr.fragment_offset ||
+ mask->hdr.time_to_live ||
+ mask->hdr.hdr_checksum) {
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL, "Not supported by classifier\n");
+ return -rte_errno;
+ }
+
+ if (mask->hdr.type_of_service & MRVL_IPV4_DSCP_MASK) {
+ ret = mrvl_parse_ip4_dscp(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ if (mask->hdr.src_addr) {
+ ret = mrvl_parse_ip4_sip(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ if (mask->hdr.dst_addr) {
+ ret = mrvl_parse_ip4_dip(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ if (mask->hdr.next_proto_id) {
+ RTE_LOG(WARNING, PMD, "next proto id mask is ignored\n");
+ ret = mrvl_parse_ip4_proto(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ return 0;
+out:
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Reached maximum number of fields in cls tbl key\n");
+ return -rte_errno;
+}
+
+/**
+ * Parse ipv6 flow item.
+ *
+ * @param item Pointer to the flow item.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param fields Pointer to the parsed parsed fields enum.
+ * @returns 0 on success, negative value otherwise.
+ */
+static int
+mrvl_parse_ip6(const struct rte_flow_item *item,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv6 *spec = NULL, *mask = NULL;
+ struct ipv6_hdr zero;
+ uint32_t flow_mask;
+ int ret;
+
+ ret = mrvl_parse_init(item, (const void **)&spec,
+ (const void **)&mask,
+ &rte_flow_item_ipv6_mask,
+ sizeof(struct rte_flow_item_ipv6),
+ error);
+ if (ret)
+ return ret;
+
+ memset(&zero, 0, sizeof(zero));
+
+ if (mask->hdr.payload_len ||
+ mask->hdr.hop_limits) {
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL, "Not supported by classifier\n");
+ return -rte_errno;
+ }
+
+ if (memcmp(mask->hdr.src_addr,
+ zero.src_addr, sizeof(mask->hdr.src_addr))) {
+ ret = mrvl_parse_ip6_sip(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ if (memcmp(mask->hdr.dst_addr,
+ zero.dst_addr, sizeof(mask->hdr.dst_addr))) {
+ ret = mrvl_parse_ip6_dip(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ flow_mask = rte_be_to_cpu_32(mask->hdr.vtc_flow) & MRVL_IPV6_FLOW_MASK;
+ if (flow_mask) {
+ ret = mrvl_parse_ip6_flow(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ if (mask->hdr.proto) {
+ RTE_LOG(WARNING, PMD, "next header mask is ignored\n");
+ ret = mrvl_parse_ip6_next_hdr(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ return 0;
+out:
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Reached maximum number of fields in cls tbl key\n");
+ return -rte_errno;
+}
+
+/**
+ * Parse tcp flow item.
+ *
+ * @param item Pointer to the flow item.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param fields Pointer to the parsed parsed fields enum.
+ * @returns 0 on success, negative value otherwise.
+ */
+static int
+mrvl_parse_tcp(const struct rte_flow_item *item,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_tcp *spec = NULL, *mask = NULL;
+ int ret;
+
+ ret = mrvl_parse_init(item, (const void **)&spec, (const void **)&mask,
+ &rte_flow_item_ipv4_mask,
+ sizeof(struct rte_flow_item_ipv4), error);
+ if (ret)
+ return ret;
+
+ if (mask->hdr.sent_seq ||
+ mask->hdr.recv_ack ||
+ mask->hdr.data_off ||
+ mask->hdr.tcp_flags ||
+ mask->hdr.rx_win ||
+ mask->hdr.cksum ||
+ mask->hdr.tcp_urp) {
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL, "Not supported by classifier\n");
+ return -rte_errno;
+ }
+
+ if (mask->hdr.src_port) {
+ RTE_LOG(WARNING, PMD, "tcp sport mask is ignored\n");
+ ret = mrvl_parse_tcp_sport(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ if (mask->hdr.dst_port) {
+ RTE_LOG(WARNING, PMD, "tcp dport mask is ignored\n");
+ ret = mrvl_parse_tcp_dport(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ return 0;
+out:
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Reached maximum number of fields in cls tbl key\n");
+ return -rte_errno;
+}
+
+/**
+ * Parse udp flow item.
+ *
+ * @param item Pointer to the flow item.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param fields Pointer to the parsed parsed fields enum.
+ * @returns 0 on success, negative value otherwise.
+ */
+static int
+mrvl_parse_udp(const struct rte_flow_item *item,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_udp *spec = NULL, *mask = NULL;
+ int ret;
+
+ ret = mrvl_parse_init(item, (const void **)&spec, (const void **)&mask,
+ &rte_flow_item_ipv4_mask,
+ sizeof(struct rte_flow_item_ipv4), error);
+ if (ret)
+ return ret;
+
+ if (mask->hdr.dgram_len ||
+ mask->hdr.dgram_cksum) {
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL, "Not supported by classifier\n");
+ return -rte_errno;
+ }
+
+ if (mask->hdr.src_port) {
+ RTE_LOG(WARNING, PMD, "udp sport mask is ignored\n");
+ ret = mrvl_parse_udp_sport(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ if (mask->hdr.dst_port) {
+ RTE_LOG(WARNING, PMD, "udp dport mask is ignored\n");
+ ret = mrvl_parse_udp_dport(spec, mask, flow);
+ if (ret)
+ goto out;
+ }
+
+ return 0;
+out:
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Reached maximum number of fields in cls tbl key\n");
+ return -rte_errno;
+}
+
+/**
+ * Parse flow pattern composed of the the eth item.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_eth(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_eth(pattern, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the eth and vlan items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_eth_vlan(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+ int ret;
+
+ ret = mrvl_parse_eth(item, flow, error);
+ if (ret)
+ return ret;
+
+ item = mrvl_next_item(item + 1);
+
+ return mrvl_parse_vlan(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the eth, vlan and ip4/ip6 items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param ip6 1 to parse ip6 item, 0 to parse ip4 item.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_eth_vlan_ip4_ip6(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error, int ip6)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+ int ret;
+
+ ret = mrvl_parse_eth(item, flow, error);
+ if (ret)
+ return ret;
+
+ item = mrvl_next_item(item + 1);
+ ret = mrvl_parse_vlan(item, flow, error);
+ if (ret)
+ return ret;
+
+ item = mrvl_next_item(item + 1);
+
+ return ip6 ? mrvl_parse_ip6(item, flow, error) :
+ mrvl_parse_ip4(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the eth, vlan and ipv4 items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_eth_vlan_ip4(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_eth_vlan_ip4_ip6(pattern, flow, error, 0);
+}
+
+/**
+ * Parse flow pattern composed of the eth, vlan and ipv6 items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_eth_vlan_ip6(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_eth_vlan_ip4_ip6(pattern, flow, error, 1);
+}
+
+/**
+ * Parse flow pattern composed of the eth and ip4/ip6 items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param ip6 1 to parse ip6 item, 0 to parse ip4 item.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_eth_ip4_ip6(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error, int ip6)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+ int ret;
+
+ ret = mrvl_parse_eth(item, flow, error);
+ if (ret)
+ return ret;
+
+ item = mrvl_next_item(item + 1);
+
+ return ip6 ? mrvl_parse_ip6(item, flow, error) :
+ mrvl_parse_ip4(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the eth and ipv4 items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_eth_ip4(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_eth_ip4_ip6(pattern, flow, error, 0);
+}
+
+/**
+ * Parse flow pattern composed of the eth and ipv6 items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_eth_ip6(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_eth_ip4_ip6(pattern, flow, error, 1);
+}
+
+/**
+ * Parse flow pattern composed of the eth, ip4 and tcp/udp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param tcp 1 to parse tcp item, 0 to parse udp item.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_eth_ip4_tcp_udp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error, int tcp)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+ int ret;
+
+ ret = mrvl_parse_pattern_eth_ip4_ip6(pattern, flow, error, 0);
+ if (ret)
+ return ret;
+
+ item = mrvl_next_item(item + 1);
+ item = mrvl_next_item(item + 1);
+
+ if (tcp)
+ return mrvl_parse_tcp(item, flow, error);
+
+ return mrvl_parse_udp(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the eth, ipv4 and tcp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_eth_ip4_tcp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_eth_ip4_tcp_udp(pattern, flow, error, 1);
+}
+
+/**
+ * Parse flow pattern composed of the eth, ipv4 and udp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_eth_ip4_udp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_eth_ip4_tcp_udp(pattern, flow, error, 0);
+}
+
+/**
+ * Parse flow pattern composed of the eth, ipv6 and tcp/udp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param tcp 1 to parse tcp item, 0 to parse udp item.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_eth_ip6_tcp_udp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error, int tcp)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+ int ret;
+
+ ret = mrvl_parse_pattern_eth_ip4_ip6(pattern, flow, error, 1);
+ if (ret)
+ return ret;
+
+ item = mrvl_next_item(item + 1);
+ item = mrvl_next_item(item + 1);
+
+ if (tcp)
+ return mrvl_parse_tcp(item, flow, error);
+
+ return mrvl_parse_udp(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the eth, ipv6 and tcp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_eth_ip6_tcp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_eth_ip6_tcp_udp(pattern, flow, error, 1);
+}
+
+/**
+ * Parse flow pattern composed of the eth, ipv6 and udp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_eth_ip6_udp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_eth_ip6_tcp_udp(pattern, flow, error, 0);
+}
+
+/**
+ * Parse flow pattern composed of the vlan item.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_vlan(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+
+ return mrvl_parse_vlan(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the vlan and ip4/ip6 items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param ip6 1 to parse ip6 item, 0 to parse ip4 item.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_vlan_ip4_ip6(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error, int ip6)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+ int ret;
+
+ ret = mrvl_parse_vlan(item, flow, error);
+ if (ret)
+ return ret;
+
+ item = mrvl_next_item(item + 1);
+
+ return ip6 ? mrvl_parse_ip6(item, flow, error) :
+ mrvl_parse_ip4(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the vlan and ipv4 items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_vlan_ip4(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_vlan_ip4_ip6(pattern, flow, error, 0);
+}
+
+/**
+ * Parse flow pattern composed of the vlan, ipv4 and tcp/udp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_vlan_ip_tcp_udp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error, int tcp)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+ int ret;
+
+ ret = mrvl_parse_pattern_vlan_ip4_ip6(pattern, flow, error, 0);
+ if (ret)
+ return ret;
+
+ item = mrvl_next_item(item + 1);
+ item = mrvl_next_item(item + 1);
+
+ if (tcp)
+ return mrvl_parse_tcp(item, flow, error);
+
+ return mrvl_parse_udp(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the vlan, ipv4 and tcp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_vlan_ip_tcp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_vlan_ip_tcp_udp(pattern, flow, error, 1);
+}
+
+/**
+ * Parse flow pattern composed of the vlan, ipv4 and udp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_vlan_ip_udp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_vlan_ip_tcp_udp(pattern, flow, error, 0);
+}
+
+/**
+ * Parse flow pattern composed of the vlan and ipv6 items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_vlan_ip6(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_vlan_ip4_ip6(pattern, flow, error, 1);
+}
+
+/**
+ * Parse flow pattern composed of the vlan, ipv6 and tcp/udp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_vlan_ip6_tcp_udp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error, int tcp)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+ int ret;
+
+ ret = mrvl_parse_pattern_vlan_ip4_ip6(pattern, flow, error, 1);
+ if (ret)
+ return ret;
+
+ item = mrvl_next_item(item + 1);
+ item = mrvl_next_item(item + 1);
+
+ if (tcp)
+ return mrvl_parse_tcp(item, flow, error);
+
+ return mrvl_parse_udp(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the vlan, ipv6 and tcp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_vlan_ip6_tcp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_vlan_ip6_tcp_udp(pattern, flow, error, 1);
+}
+
+/**
+ * Parse flow pattern composed of the vlan, ipv6 and udp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_vlan_ip6_udp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_vlan_ip6_tcp_udp(pattern, flow, error, 0);
+}
+
+/**
+ * Parse flow pattern composed of the ip4/ip6 item.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param ip6 1 to parse ip6 item, 0 to parse ip4 item.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_ip4_ip6(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error, int ip6)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+
+ return ip6 ? mrvl_parse_ip6(item, flow, error) :
+ mrvl_parse_ip4(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the ipv4 item.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_ip4(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_ip4_ip6(pattern, flow, error, 0);
+}
+
+/**
+ * Parse flow pattern composed of the ipv6 item.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_ip6(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_ip4_ip6(pattern, flow, error, 1);
+}
+
+/**
+ * Parse flow pattern composed of the ip4/ip6 and tcp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @param ip6 1 to parse ip6 item, 0 to parse ip4 item.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_ip4_ip6_tcp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error, int ip6)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+ int ret;
+
+ ret = ip6 ? mrvl_parse_ip6(item, flow, error) :
+ mrvl_parse_ip4(item, flow, error);
+ if (ret)
+ return ret;
+
+ item = mrvl_next_item(item + 1);
+
+ return mrvl_parse_tcp(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the ipv4 and tcp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_ip4_tcp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_ip4_ip6_tcp(pattern, flow, error, 0);
+}
+
+/**
+ * Parse flow pattern composed of the ipv6 and tcp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_ip6_tcp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_ip4_ip6_tcp(pattern, flow, error, 1);
+}
+
+/**
+ * Parse flow pattern composed of the ipv4/ipv6 and udp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_ip4_ip6_udp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error, int ip6)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+ int ret;
+
+ ret = ip6 ? mrvl_parse_ip6(item, flow, error) :
+ mrvl_parse_ip4(item, flow, error);
+ if (ret)
+ return ret;
+
+ item = mrvl_next_item(item + 1);
+
+ return mrvl_parse_udp(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the ipv4 and udp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_ip4_udp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_ip4_ip6_udp(pattern, flow, error, 0);
+}
+
+/**
+ * Parse flow pattern composed of the ipv6 and udp items.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static inline int
+mrvl_parse_pattern_ip6_udp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ return mrvl_parse_pattern_ip4_ip6_udp(pattern, flow, error, 1);
+}
+
+/**
+ * Parse flow pattern composed of the tcp item.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_tcp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+
+ return mrvl_parse_tcp(item, flow, error);
+}
+
+/**
+ * Parse flow pattern composed of the udp item.
+ *
+ * @param pattern Pointer to the flow pattern table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_parse_pattern_udp(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item *item = mrvl_next_item(pattern);
+
+ return mrvl_parse_udp(item, flow, error);
+}
+
+/**
+ * Structure used to map specific flow pattern to the pattern parse callback
+ * which will iterate over each pattern item and extract relevant data.
+ */
+static const struct {
+ const enum rte_flow_item_type *pattern;
+ int (*parse)(const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error);
+} mrvl_patterns[] = {
+ { pattern_eth, mrvl_parse_pattern_eth },
+ { pattern_eth_vlan, mrvl_parse_pattern_eth_vlan },
+ { pattern_eth_vlan_ip, mrvl_parse_pattern_eth_vlan_ip4 },
+ { pattern_eth_vlan_ip6, mrvl_parse_pattern_eth_vlan_ip6 },
+ { pattern_eth_ip4, mrvl_parse_pattern_eth_ip4 },
+ { pattern_eth_ip4_tcp, mrvl_parse_pattern_eth_ip4_tcp },
+ { pattern_eth_ip4_udp, mrvl_parse_pattern_eth_ip4_udp },
+ { pattern_eth_ip6, mrvl_parse_pattern_eth_ip6 },
+ { pattern_eth_ip6_tcp, mrvl_parse_pattern_eth_ip6_tcp },
+ { pattern_eth_ip6_udp, mrvl_parse_pattern_eth_ip6_udp },
+ { pattern_vlan, mrvl_parse_pattern_vlan },
+ { pattern_vlan_ip, mrvl_parse_pattern_vlan_ip4 },
+ { pattern_vlan_ip_tcp, mrvl_parse_pattern_vlan_ip_tcp },
+ { pattern_vlan_ip_udp, mrvl_parse_pattern_vlan_ip_udp },
+ { pattern_vlan_ip6, mrvl_parse_pattern_vlan_ip6 },
+ { pattern_vlan_ip6_tcp, mrvl_parse_pattern_vlan_ip6_tcp },
+ { pattern_vlan_ip6_udp, mrvl_parse_pattern_vlan_ip6_udp },
+ { pattern_ip, mrvl_parse_pattern_ip4 },
+ { pattern_ip_tcp, mrvl_parse_pattern_ip4_tcp },
+ { pattern_ip_udp, mrvl_parse_pattern_ip4_udp },
+ { pattern_ip6, mrvl_parse_pattern_ip6 },
+ { pattern_ip6_tcp, mrvl_parse_pattern_ip6_tcp },
+ { pattern_ip6_udp, mrvl_parse_pattern_ip6_udp },
+ { pattern_tcp, mrvl_parse_pattern_tcp },
+ { pattern_udp, mrvl_parse_pattern_udp }
+};
+
+/**
+ * Check whether provided pattern matches any of the supported ones.
+ *
+ * @param type_pattern Pointer to the pattern type.
+ * @param item_pattern Pointer to the flow pattern.
+ * @returns 1 in case of success, 0 value otherwise.
+ */
+static int
+mrvl_patterns_match(const enum rte_flow_item_type *type_pattern,
+ const struct rte_flow_item *item_pattern)
+{
+ const enum rte_flow_item_type *type = type_pattern;
+ const struct rte_flow_item *item = item_pattern;
+
+ for (;;) {
+ if (item->type == RTE_FLOW_ITEM_TYPE_VOID) {
+ item++;
+ continue;
+ }
+
+ if (*type == RTE_FLOW_ITEM_TYPE_END ||
+ item->type == RTE_FLOW_ITEM_TYPE_END)
+ break;
+
+ if (*type != item->type)
+ break;
+
+ item++;
+ type++;
+ }
+
+ return *type == item->type;
+}
+
+/**
+ * Parse flow attribute.
+ *
+ * This will check whether the provided attribute's flags are supported.
+ *
+ * @param priv Unused
+ * @param attr Pointer to the flow attribute.
+ * @param flow Unused
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_flow_parse_attr(struct mrvl_priv *priv __rte_unused,
+ const struct rte_flow_attr *attr,
+ struct rte_flow *flow __rte_unused,
+ struct rte_flow_error *error)
+{
+ if (!attr) {
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ATTR,
+ NULL, "NULL attribute");
+ return -rte_errno;
+ }
+
+ if (attr->group) {
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP, NULL,
+ "Groups are not supported");
+ return -rte_errno;
+ }
+ if (attr->priority) {
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY, NULL,
+ "Priorities are not supported");
+ return -rte_errno;
+ }
+ if (!attr->ingress) {
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, NULL,
+ "Only ingress is supported");
+ return -rte_errno;
+ }
+ if (attr->egress) {
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "Egress is not supported");
+ return -rte_errno;
+ }
+
+ return 0;
+}
+
+/**
+ * Parse flow pattern.
+ *
+ * Specific classifier rule will be created as well.
+ *
+ * @param priv Unused
+ * @param pattern Pointer to the flow pattern.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_flow_parse_pattern(struct mrvl_priv *priv __rte_unused,
+ const struct rte_flow_item pattern[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < RTE_DIM(mrvl_patterns); i++) {
+ if (!mrvl_patterns_match(mrvl_patterns[i].pattern, pattern))
+ continue;
+
+ ret = mrvl_patterns[i].parse(pattern, flow, error);
+ if (ret)
+ mrvl_free_all_key_mask(&flow->rule);
+
+ return ret;
+ }
+
+ rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, NULL,
+ "Unsupported pattern");
+
+ return -rte_errno;
+}
+
+/**
+ * Parse flow actions.
+ *
+ * @param priv Pointer to the port's private data.
+ * @param actions Pointer the action table.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_flow_parse_actions(struct mrvl_priv *priv,
+ const struct rte_flow_action actions[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action *action = actions;
+ int specified = 0;
+
+ for (; action->type != RTE_FLOW_ACTION_TYPE_END; action++) {
+ if (action->type == RTE_FLOW_ACTION_TYPE_VOID)
+ continue;
+
+ if (action->type == RTE_FLOW_ACTION_TYPE_DROP) {
+ flow->cos.ppio = priv->ppio;
+ flow->cos.tc = 0;
+ flow->action.type = PP2_CLS_TBL_ACT_DROP;
+ flow->action.cos = &flow->cos;
+ specified++;
+ } else if (action->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
+ const struct rte_flow_action_queue *q =
+ (const struct rte_flow_action_queue *)
+ action->conf;
+
+ if (q->index > priv->nb_rx_queues) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "Queue index out of range");
+ return -rte_errno;
+ }
+
+ if (priv->rxq_map[q->index].tc == MRVL_UNKNOWN_TC) {
+ /*
+ * Unknown TC mapping, mapping will not have
+ * a correct queue.
+ */
+ RTE_LOG(ERR, PMD,
+ "Unknown TC mapping for queue %hu eth%hhu\n",
+ q->index, priv->ppio_id);
+
+ rte_flow_error_set(error, EFAULT,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, NULL);
+ return -rte_errno;
+ }
+
+ RTE_LOG(DEBUG, PMD,
+ "Action: Assign packets to queue %d, tc:%d, q:%d\n",
+ q->index, priv->rxq_map[q->index].tc,
+ priv->rxq_map[q->index].inq);
+
+ flow->cos.ppio = priv->ppio;
+ flow->cos.tc = priv->rxq_map[q->index].tc;
+ flow->action.type = PP2_CLS_TBL_ACT_DONE;
+ flow->action.cos = &flow->cos;
+ specified++;
+ } else {
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "Action not supported");
+ return -rte_errno;
+ }
+
+ }
+
+ if (!specified) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "Action not specified");
+ return -rte_errno;
+ }
+
+ return 0;
+}
+
+/**
+ * Parse flow attribute, pattern and actions.
+ *
+ * @param priv Pointer to the port's private data.
+ * @param attr Pointer to the flow attribute.
+ * @param pattern Pointer to the flow pattern.
+ * @param actions Pointer to the flow actions.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 on success, negative value otherwise.
+ */
+static int
+mrvl_flow_parse(struct mrvl_priv *priv, const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ int ret;
+
+ ret = mrvl_flow_parse_attr(priv, attr, flow, error);
+ if (ret)
+ return ret;
+
+ ret = mrvl_flow_parse_pattern(priv, pattern, flow, error);
+ if (ret)
+ return ret;
+
+ return mrvl_flow_parse_actions(priv, actions, flow, error);
+}
+
+static inline enum pp2_cls_tbl_type
+mrvl_engine_type(const struct rte_flow *flow)
+{
+ int i, size = 0;
+
+ for (i = 0; i < flow->rule.num_fields; i++)
+ size += flow->rule.fields[i].size;
+
+ /*
+ * For maskable engine type the key size must be up to 8 bytes.
+ * For keys with size bigger than 8 bytes, engine type must
+ * be set to exact match.
+ */
+ if (size > 8)
+ return PP2_CLS_TBL_EXACT_MATCH;
+
+ return PP2_CLS_TBL_MASKABLE;
+}
+
+static int
+mrvl_create_cls_table(struct rte_eth_dev *dev, struct rte_flow *first_flow)
+{
+ struct mrvl_priv *priv = dev->data->dev_private;
+ struct pp2_cls_tbl_key *key = &priv->cls_tbl_params.key;
+ int ret;
+
+ if (priv->cls_tbl) {
+ pp2_cls_tbl_deinit(priv->cls_tbl);
+ priv->cls_tbl = NULL;
+ }
+
+ memset(&priv->cls_tbl_params, 0, sizeof(priv->cls_tbl_params));
+
+ priv->cls_tbl_params.type = mrvl_engine_type(first_flow);
+ RTE_LOG(INFO, PMD, "Setting cls search engine type to %s\n",
+ priv->cls_tbl_params.type == PP2_CLS_TBL_EXACT_MATCH ?
+ "exact" : "maskable");
+ priv->cls_tbl_params.max_num_rules = MRVL_CLS_MAX_NUM_RULES;
+ priv->cls_tbl_params.default_act.type = PP2_CLS_TBL_ACT_DONE;
+ priv->cls_tbl_params.default_act.cos = &first_flow->cos;
+
+ if (first_flow->pattern & F_DMAC) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_ETH;
+ key->proto_field[key->num_fields].field.eth = MV_NET_ETH_F_DA;
+ key->key_size += 6;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_SMAC) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_ETH;
+ key->proto_field[key->num_fields].field.eth = MV_NET_ETH_F_SA;
+ key->key_size += 6;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_TYPE) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_ETH;
+ key->proto_field[key->num_fields].field.eth = MV_NET_ETH_F_TYPE;
+ key->key_size += 2;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_VLAN_ID) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_VLAN;
+ key->proto_field[key->num_fields].field.vlan = MV_NET_VLAN_F_ID;
+ key->key_size += 2;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_VLAN_PRI) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_VLAN;
+ key->proto_field[key->num_fields].field.vlan =
+ MV_NET_VLAN_F_PRI;
+ key->key_size += 1;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_IP4_TOS) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_IP4;
+ key->proto_field[key->num_fields].field.ipv4 = MV_NET_IP4_F_TOS;
+ key->key_size += 1;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_IP4_SIP) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_IP4;
+ key->proto_field[key->num_fields].field.ipv4 = MV_NET_IP4_F_SA;
+ key->key_size += 4;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_IP4_DIP) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_IP4;
+ key->proto_field[key->num_fields].field.ipv4 = MV_NET_IP4_F_DA;
+ key->key_size += 4;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_IP4_PROTO) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_IP4;
+ key->proto_field[key->num_fields].field.ipv4 =
+ MV_NET_IP4_F_PROTO;
+ key->key_size += 1;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_IP6_SIP) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_IP6;
+ key->proto_field[key->num_fields].field.ipv6 = MV_NET_IP6_F_SA;
+ key->key_size += 16;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_IP6_DIP) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_IP6;
+ key->proto_field[key->num_fields].field.ipv6 = MV_NET_IP6_F_DA;
+ key->key_size += 16;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_IP6_FLOW) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_IP6;
+ key->proto_field[key->num_fields].field.ipv6 =
+ MV_NET_IP6_F_FLOW;
+ key->key_size += 3;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_IP6_NEXT_HDR) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_IP6;
+ key->proto_field[key->num_fields].field.ipv6 =
+ MV_NET_IP6_F_NEXT_HDR;
+ key->key_size += 1;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_TCP_SPORT) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_TCP;
+ key->proto_field[key->num_fields].field.tcp = MV_NET_TCP_F_SP;
+ key->key_size += 2;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_TCP_DPORT) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_TCP;
+ key->proto_field[key->num_fields].field.tcp = MV_NET_TCP_F_DP;
+ key->key_size += 2;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_UDP_SPORT) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_UDP;
+ key->proto_field[key->num_fields].field.tcp = MV_NET_TCP_F_SP;
+ key->key_size += 2;
+ key->num_fields += 1;
+ }
+
+ if (first_flow->pattern & F_UDP_DPORT) {
+ key->proto_field[key->num_fields].proto = MV_NET_PROTO_UDP;
+ key->proto_field[key->num_fields].field.udp = MV_NET_TCP_F_DP;
+ key->key_size += 2;
+ key->num_fields += 1;
+ }
+
+ ret = pp2_cls_tbl_init(&priv->cls_tbl_params, &priv->cls_tbl);
+ if (!ret)
+ priv->cls_tbl_pattern = first_flow->pattern;
+
+ return ret;
+}
+
+/**
+ * Check whether new flow can be added to the table
+ *
+ * @param priv Pointer to the port's private data.
+ * @param flow Pointer to the new flow.
+ * @return 1 in case flow can be added, 0 otherwise.
+ */
+static inline int
+mrvl_flow_can_be_added(struct mrvl_priv *priv, const struct rte_flow *flow)
+{
+ return flow->pattern == priv->cls_tbl_pattern &&
+ mrvl_engine_type(flow) == priv->cls_tbl_params.type;
+}
+
+/**
+ * DPDK flow create callback called when flow is to be created.
+ *
+ * @param dev Pointer to the device.
+ * @param attr Pointer to the flow attribute.
+ * @param pattern Pointer to the flow pattern.
+ * @param actions Pointer to the flow actions.
+ * @param error Pointer to the flow error.
+ * @returns Pointer to the created flow in case of success, NULL otherwise.
+ */
+static struct rte_flow *
+mrvl_flow_create(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct mrvl_priv *priv = dev->data->dev_private;
+ struct rte_flow *flow, *first;
+ int ret;
+
+ if (!dev->data->dev_started) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Port must be started first\n");
+ return NULL;
+ }
+
+ flow = rte_zmalloc_socket(NULL, sizeof(*flow), 0, rte_socket_id());
+ if (!flow)
+ return NULL;
+
+ ret = mrvl_flow_parse(priv, attr, pattern, actions, flow, error);
+ if (ret)
+ goto out;
+
+ /*
+ * Four cases here:
+ *
+ * 1. In case table does not exist - create one.
+ * 2. In case table exists, is empty and new flow cannot be added
+ * recreate table.
+ * 3. In case table is not empty and new flow matches table format
+ * add it.
+ * 4. Otherwise flow cannot be added.
+ */
+ first = LIST_FIRST(&priv->flows);
+ if (!priv->cls_tbl) {
+ ret = mrvl_create_cls_table(dev, flow);
+ } else if (!first && !mrvl_flow_can_be_added(priv, flow)) {
+ ret = mrvl_create_cls_table(dev, flow);
+ } else if (mrvl_flow_can_be_added(priv, flow)) {
+ ret = 0;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Pattern does not match cls table format\n");
+ goto out;
+ }
+
+ if (ret) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Failed to create cls table\n");
+ goto out;
+ }
+
+ ret = pp2_cls_tbl_add_rule(priv->cls_tbl, &flow->rule, &flow->action);
+ if (ret) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Failed to add rule\n");
+ goto out;
+ }
+
+ LIST_INSERT_HEAD(&priv->flows, flow, next);
+
+ return flow;
+out:
+ rte_free(flow);
+ return NULL;
+}
+
+/**
+ * Remove classifier rule associated with given flow.
+ *
+ * @param priv Pointer to the port's private data.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_flow_remove(struct mrvl_priv *priv, struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ int ret;
+
+ if (!priv->cls_tbl) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Classifier table not initialized");
+ return -rte_errno;
+ }
+
+ ret = pp2_cls_tbl_remove_rule(priv->cls_tbl, &flow->rule);
+ if (ret) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Failed to remove rule");
+ return -rte_errno;
+ }
+
+ mrvl_free_all_key_mask(&flow->rule);
+
+ return 0;
+}
+
+/**
+ * DPDK flow destroy callback called when flow is to be removed.
+ *
+ * @param priv Pointer to the port's private data.
+ * @param flow Pointer to the flow.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_flow_destroy(struct rte_eth_dev *dev, struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct mrvl_priv *priv = dev->data->dev_private;
+ struct rte_flow *f;
+ int ret;
+
+ LIST_FOREACH(f, &priv->flows, next) {
+ if (f == flow)
+ break;
+ }
+
+ if (!flow) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Rule was not found");
+ return -rte_errno;
+ }
+
+ LIST_REMOVE(f, next);
+
+ ret = mrvl_flow_remove(priv, flow, error);
+ if (ret)
+ return ret;
+
+ rte_free(flow);
+
+ return 0;
+}
+
+/**
+ * DPDK flow callback called to verify given attribute, pattern and actions.
+ *
+ * @param dev Pointer to the device.
+ * @param attr Pointer to the flow attribute.
+ * @param pattern Pointer to the flow pattern.
+ * @param actions Pointer to the flow actions.
+ * @param error Pointer to the flow error.
+ * @returns 0 on success, negative value otherwise.
+ */
+static int
+mrvl_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ static struct rte_flow *flow;
+
+ flow = mrvl_flow_create(dev, attr, pattern, actions, error);
+ if (!flow)
+ return -rte_errno;
+
+ mrvl_flow_destroy(dev, flow, error);
+
+ return 0;
+}
+
+/**
+ * DPDK flow flush callback called when flows are to be flushed.
+ *
+ * @param dev Pointer to the device.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_flow_flush(struct rte_eth_dev *dev, struct rte_flow_error *error)
+{
+ struct mrvl_priv *priv = dev->data->dev_private;
+
+ while (!LIST_EMPTY(&priv->flows)) {
+ struct rte_flow *flow = LIST_FIRST(&priv->flows);
+ int ret = mrvl_flow_remove(priv, flow, error);
+ if (ret)
+ return ret;
+
+ LIST_REMOVE(flow, next);
+ rte_free(flow);
+ }
+
+ return 0;
+}
+
+/**
+ * DPDK flow isolate callback called to isolate port.
+ *
+ * @param dev Pointer to the device.
+ * @param enable Pass 0/1 to disable/enable port isolation.
+ * @param error Pointer to the flow error.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_flow_isolate(struct rte_eth_dev *dev, int enable,
+ struct rte_flow_error *error)
+{
+ struct mrvl_priv *priv = dev->data->dev_private;
+
+ if (dev->data->dev_started) {
+ rte_flow_error_set(error, EBUSY,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "Port must be stopped first\n");
+ return -rte_errno;
+ }
+
+ priv->isolated = enable;
+
+ return 0;
+}
+
+const struct rte_flow_ops mrvl_flow_ops = {
+ .validate = mrvl_flow_validate,
+ .create = mrvl_flow_create,
+ .destroy = mrvl_flow_destroy,
+ .flush = mrvl_flow_flush,
+ .isolate = mrvl_flow_isolate
+};
--
2.7.4
next prev parent reply other threads:[~2018-03-15 7:52 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-21 14:14 [dpdk-dev] [PATCH 0/8] net/mrvl: add new features to PMD Tomasz Duszynski
2018-02-21 14:14 ` [dpdk-dev] [PATCH 1/8] net/mrvl: fix crash when port is closed without starting Tomasz Duszynski
2018-02-21 14:14 ` [dpdk-dev] [PATCH 2/8] net/mrvl: add ingress policer support Tomasz Duszynski
2018-02-21 14:14 ` [dpdk-dev] [PATCH 3/8] net/mrvl: add egress scheduler/rate limiter support Tomasz Duszynski
2018-02-21 14:14 ` [dpdk-dev] [PATCH 4/8] net/mrvl: document policer/scheduler/rate limiter usage Tomasz Duszynski
2018-02-21 14:14 ` [dpdk-dev] [PATCH 5/8] net/mrvl: add classifier support Tomasz Duszynski
2018-03-07 11:07 ` Ferruh Yigit
2018-03-07 11:16 ` Tomasz Duszynski
2018-03-07 11:24 ` Ferruh Yigit
2018-03-08 13:23 ` Tomasz Duszynski
2018-02-21 14:14 ` [dpdk-dev] [PATCH 6/8] net/mrvl: add extended statistics Tomasz Duszynski
2018-02-21 14:14 ` [dpdk-dev] [PATCH 7/8] net/mrvl: add Rx flow control Tomasz Duszynski
2018-02-21 14:14 ` [dpdk-dev] [PATCH 8/8] net/mrvl: add Tx queue start/stop Tomasz Duszynski
2018-03-12 8:42 ` [dpdk-dev] [PATCH v2 0/8] net/mrvl: add new features to PMD Tomasz Duszynski
2018-03-12 8:42 ` [dpdk-dev] [PATCH v2 1/8] net/mrvl: fix crash when port is closed without starting Tomasz Duszynski
2018-03-12 8:42 ` [dpdk-dev] [PATCH v2 2/8] net/mrvl: add ingress policer support Tomasz Duszynski
2018-03-12 8:42 ` [dpdk-dev] [PATCH v2 3/8] net/mrvl: add egress scheduler/rate limiter support Tomasz Duszynski
2018-03-12 8:42 ` [dpdk-dev] [PATCH v2 4/8] net/mrvl: document policer/scheduler/rate limiter usage Tomasz Duszynski
2018-03-12 8:42 ` [dpdk-dev] [PATCH v2 5/8] net/mrvl: add classifier support Tomasz Duszynski
2018-03-12 8:42 ` [dpdk-dev] [PATCH v2 6/8] net/mrvl: add extended statistics Tomasz Duszynski
2018-03-14 17:21 ` Ferruh Yigit
2018-03-15 7:09 ` Tomasz Duszynski
2018-03-12 8:42 ` [dpdk-dev] [PATCH v2 7/8] net/mrvl: add Rx flow control Tomasz Duszynski
2018-03-12 8:42 ` [dpdk-dev] [PATCH v2 8/8] net/mrvl: add Tx queue start/stop Tomasz Duszynski
2018-03-15 7:51 ` [dpdk-dev] [PATCH v3 0/8] net/mrvl: add new features to PMD Tomasz Duszynski
2018-03-15 7:51 ` [dpdk-dev] [PATCH v3 1/8] net/mrvl: fix crash when port is closed without starting Tomasz Duszynski
2018-03-15 7:51 ` [dpdk-dev] [PATCH v3 2/8] net/mrvl: add ingress policer support Tomasz Duszynski
2018-03-15 7:51 ` [dpdk-dev] [PATCH v3 3/8] net/mrvl: add egress scheduler/rate limiter support Tomasz Duszynski
2018-03-15 7:52 ` [dpdk-dev] [PATCH v3 4/8] net/mrvl: document policer/scheduler/rate limiter usage Tomasz Duszynski
2018-03-15 7:52 ` Tomasz Duszynski [this message]
2018-03-15 7:52 ` [dpdk-dev] [PATCH v3 6/8] net/mrvl: add extended statistics Tomasz Duszynski
2018-03-15 7:52 ` [dpdk-dev] [PATCH v3 7/8] net/mrvl: add Rx flow control Tomasz Duszynski
2018-03-15 7:52 ` [dpdk-dev] [PATCH v3 8/8] net/mrvl: add Tx queue start/stop Tomasz Duszynski
2018-03-15 15:09 ` [dpdk-dev] [PATCH v3 0/8] net/mrvl: add new features to PMD Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521100324-26558-6-git-send-email-tdu@semihalf.com \
--to=tdu@semihalf.com \
--cc=dev@dpdk.org \
--cc=dima@marvell.com \
--cc=jck@semihalf.com \
--cc=jianbo.liu@arm.com \
--cc=mw@semihalf.com \
--cc=nsamsono@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).