From: Andrew Rybchenko <arybchenko@solarflare.com>
To: <dev@dpdk.org>
Cc: Ferruh Yigit <ferruh.yigit@intel.com>,
Ivan Malov <ivan.malov@oktetlabs.ru>
Subject: [dpdk-dev] [PATCH v3 3/6] net/sfc: add support for per-port dynamic logging
Date: Wed, 21 Mar 2018 11:28:18 +0000 [thread overview]
Message-ID: <1521631701-11282-4-git-send-email-arybchenko@solarflare.com> (raw)
In-Reply-To: <1521631701-11282-1-git-send-email-arybchenko@solarflare.com>
From: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
---
doc/guides/nics/sfc_efx.rst | 6 ++++++
drivers/net/sfc/Makefile | 2 +-
drivers/net/sfc/sfc.c | 32 ++++++++++++++++++++++++++++++++
drivers/net/sfc/sfc.h | 5 +++++
drivers/net/sfc/sfc_ethdev.c | 3 +++
drivers/net/sfc/sfc_log.h | 41 ++++++++++++++++++++++++++++++++---------
6 files changed, 79 insertions(+), 10 deletions(-)
diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index 7162ffd..a580d94 100644
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -358,3 +358,9 @@ SFC EFX PMD provides the following log types available for control:
- ``pmd.net.sfc.driver`` (default level is **6** - ``RTE_LOG_NOTICE``)
Affects driver-wide messages unrelated to any particular devices.
+
+- ``pmd.net.sfc.main`` (default level is **6** - ``RTE_LOG_NOTICE``)
+
+ Matches a subset of per-port log types registered during runtime.
+ A full name for a particular type may be obtained by appending a
+ dot and a PCI device identifier (``XXXX:XX:XX.X``) to the prefix.
diff --git a/drivers/net/sfc/Makefile b/drivers/net/sfc/Makefile
index d2decd0..d3361d1 100644
--- a/drivers/net/sfc/Makefile
+++ b/drivers/net/sfc/Makefile
@@ -50,7 +50,7 @@ CFLAGS_sfc_ef10_tx.o += -wd3656
endif
LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs
-LDLIBS += -lrte_bus_pci
+LDLIBS += -lrte_bus_pci -lrte_pci
#
# List of base driver object files for which
diff --git a/drivers/net/sfc/sfc.c b/drivers/net/sfc/sfc.c
index 7eb9305..cb3a581 100644
--- a/drivers/net/sfc/sfc.c
+++ b/drivers/net/sfc/sfc.c
@@ -835,3 +835,35 @@ sfc_unprobe(struct sfc_adapter *sa)
sfc_flow_fini(sa);
sa->state = SFC_ADAPTER_UNINITIALIZED;
}
+
+uint32_t
+sfc_register_logtype(struct sfc_adapter *sa, const char *lt_prefix_str,
+ uint32_t ll_default)
+{
+ size_t lt_prefix_str_size = strlen(lt_prefix_str);
+ size_t lt_str_size_max;
+ char *lt_str = NULL;
+ int ret;
+
+ if (SIZE_MAX - PCI_PRI_STR_SIZE - 1 > lt_prefix_str_size) {
+ ++lt_prefix_str_size; /* Reserve space for prefix separator */
+ lt_str_size_max = lt_prefix_str_size + PCI_PRI_STR_SIZE + 1;
+ } else {
+ return RTE_LOGTYPE_PMD;
+ }
+
+ lt_str = rte_zmalloc("logtype_str", lt_str_size_max, 0);
+ if (lt_str == NULL)
+ return RTE_LOGTYPE_PMD;
+
+ strncpy(lt_str, lt_prefix_str, lt_prefix_str_size);
+ lt_str[lt_prefix_str_size - 1] = '.';
+ rte_pci_device_name(&sa->pci_addr, lt_str + lt_prefix_str_size,
+ lt_str_size_max - lt_prefix_str_size);
+ lt_str[lt_str_size_max - 1] = '\0';
+
+ ret = rte_log_register_type_and_pick_level(lt_str, ll_default);
+ rte_free(lt_str);
+
+ return (ret < 0) ? RTE_LOGTYPE_PMD : ret;
+}
diff --git a/drivers/net/sfc/sfc.h b/drivers/net/sfc/sfc.h
index 7557534..768578e 100644
--- a/drivers/net/sfc/sfc.h
+++ b/drivers/net/sfc/sfc.h
@@ -170,6 +170,7 @@ struct sfc_adapter {
uint16_t port_id;
struct rte_eth_dev *eth_dev;
struct rte_kvargs *kvargs;
+ uint32_t logtype_main;
bool debug_init;
int socket_id;
efsys_bar_t mem_bar;
@@ -302,6 +303,10 @@ int sfc_dma_alloc(const struct sfc_adapter *sa, const char *name, uint16_t id,
size_t len, int socket_id, efsys_mem_t *esmp);
void sfc_dma_free(const struct sfc_adapter *sa, efsys_mem_t *esmp);
+uint32_t sfc_register_logtype(struct sfc_adapter *sa,
+ const char *lt_prefix_str,
+ uint32_t ll_default);
+
int sfc_probe(struct sfc_adapter *sa);
void sfc_unprobe(struct sfc_adapter *sa);
int sfc_attach(struct sfc_adapter *sa);
diff --git a/drivers/net/sfc/sfc_ethdev.c b/drivers/net/sfc/sfc_ethdev.c
index 341fa46..15aee22 100644
--- a/drivers/net/sfc/sfc_ethdev.c
+++ b/drivers/net/sfc/sfc_ethdev.c
@@ -1923,6 +1923,9 @@ sfc_eth_dev_init(struct rte_eth_dev *dev)
/* Copy PCI device info to the dev->data */
rte_eth_copy_pci_info(dev, pci_dev);
+ sa->logtype_main = sfc_register_logtype(sa, SFC_LOGTYPE_MAIN_STR,
+ RTE_LOG_NOTICE);
+
rc = sfc_kvargs_parse(sa);
if (rc != 0)
goto fail_kvargs_parse;
diff --git a/drivers/net/sfc/sfc_log.h b/drivers/net/sfc/sfc_log.h
index ecafffc..ec903db 100644
--- a/drivers/net/sfc/sfc_log.h
+++ b/drivers/net/sfc/sfc_log.h
@@ -22,14 +22,17 @@ extern uint32_t sfc_logtype_driver;
RTE_FMT("PMD: " RTE_FMT_HEAD(__VA_ARGS__ ,) "\n", \
RTE_FMT_TAIL(__VA_ARGS__ ,)))
+/** Name prefix for the per-device log type used to report basic information */
+#define SFC_LOGTYPE_MAIN_STR SFC_LOGTYPE_PREFIX "main"
+
/* Log PMD message, automatically add prefix and \n */
-#define SFC_LOG(sa, level, ...) \
+#define SFC_LOG(sa, level, type, ...) \
do { \
const struct sfc_adapter *__sa = (sa); \
\
- RTE_LOG(level, PMD, \
- RTE_FMT("sfc_efx " PCI_PRI_FMT " #%" PRIu8 ": " \
- RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
+ rte_log(level, type, \
+ RTE_FMT("PMD: sfc_efx " PCI_PRI_FMT " #%" PRIu8 \
+ ": " RTE_FMT_HEAD(__VA_ARGS__ ,) "\n", \
__sa->pci_addr.domain, \
__sa->pci_addr.bus, \
__sa->pci_addr.devid, \
@@ -39,23 +42,43 @@ extern uint32_t sfc_logtype_driver;
} while (0)
#define sfc_err(sa, ...) \
- SFC_LOG(sa, ERR, __VA_ARGS__)
+ do { \
+ const struct sfc_adapter *_sa = (sa); \
+ \
+ SFC_LOG(_sa, RTE_LOG_ERR, _sa->logtype_main, \
+ __VA_ARGS__); \
+ } while (0)
#define sfc_warn(sa, ...) \
- SFC_LOG(sa, WARNING, __VA_ARGS__)
+ do { \
+ const struct sfc_adapter *_sa = (sa); \
+ \
+ SFC_LOG(_sa, RTE_LOG_WARNING, _sa->logtype_main, \
+ __VA_ARGS__); \
+ } while (0)
#define sfc_notice(sa, ...) \
- SFC_LOG(sa, NOTICE, __VA_ARGS__)
+ do { \
+ const struct sfc_adapter *_sa = (sa); \
+ \
+ SFC_LOG(_sa, RTE_LOG_NOTICE, _sa->logtype_main, \
+ __VA_ARGS__); \
+ } while (0)
#define sfc_info(sa, ...) \
- SFC_LOG(sa, INFO, __VA_ARGS__)
+ do { \
+ const struct sfc_adapter *_sa = (sa); \
+ \
+ SFC_LOG(_sa, RTE_LOG_INFO, _sa->logtype_main, \
+ __VA_ARGS__); \
+ } while (0)
#define sfc_log_init(sa, ...) \
do { \
const struct sfc_adapter *_sa = (sa); \
\
if (_sa->debug_init) \
- SFC_LOG(_sa, INFO, \
+ SFC_LOG(_sa, RTE_LOG_INFO, _sa->logtype_main, \
RTE_FMT("%s(): " \
RTE_FMT_HEAD(__VA_ARGS__,), \
__func__, \
--
2.7.4
next prev parent reply other threads:[~2018-03-21 11:28 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-25 17:00 [dpdk-dev] [PATCH 0/6] net/sfc: implement " Andrew Rybchenko
2018-01-25 17:00 ` [dpdk-dev] [PATCH 1/6] eal: register log type and pick level from EAL args Andrew Rybchenko
2018-01-25 17:00 ` [dpdk-dev] [PATCH 2/6] net/sfc: add support for driver-wide dynamic logging Andrew Rybchenko
2018-01-25 18:42 ` Stephen Hemminger
2018-01-26 6:51 ` Andrew Rybchenko
2018-03-05 14:59 ` Ferruh Yigit
2018-03-06 14:45 ` Andrew Rybchenko
2018-03-06 14:56 ` Andrew Rybchenko
2018-03-06 15:26 ` Ferruh Yigit
2018-01-25 17:00 ` [dpdk-dev] [PATCH 3/6] net/sfc: add support for per-port " Andrew Rybchenko
2018-03-15 15:45 ` Ferruh Yigit
2018-01-25 17:00 ` [dpdk-dev] [PATCH 4/6] net/sfc: prepare to merge init logs with main log type Andrew Rybchenko
2018-01-25 17:00 ` [dpdk-dev] [PATCH 5/6] net/sfc: remove dedicated init log parameter Andrew Rybchenko
2018-01-25 17:00 ` [dpdk-dev] [PATCH 6/6] net/sfc: add dynamic log level for MCDI messages Andrew Rybchenko
2018-01-25 21:38 ` [dpdk-dev] [PATCH 0/6] net/sfc: implement dynamic logging Thomas Monjalon
2018-01-26 5:59 ` Andrew Rybchenko
2018-01-26 7:44 ` Thomas Monjalon
2018-02-15 11:35 ` [dpdk-dev] [PATCH v2] eal: register log type and pick level from EAL args Andrew Rybchenko
2018-03-05 15:00 ` [dpdk-dev] [PATCH 0/6] net/sfc: implement dynamic logging Ferruh Yigit
2018-03-21 11:28 ` [dpdk-dev] [PATCH v3 " Andrew Rybchenko
2018-03-21 11:28 ` [dpdk-dev] [PATCH v3 1/6] eal: register log type and pick level from EAL args Andrew Rybchenko
2018-03-22 10:21 ` Ferruh Yigit
2018-03-21 11:28 ` [dpdk-dev] [PATCH v3 2/6] net/sfc: add support for driver-wide dynamic logging Andrew Rybchenko
2018-03-21 11:28 ` Andrew Rybchenko [this message]
2018-03-21 11:28 ` [dpdk-dev] [PATCH v3 4/6] net/sfc: prepare to merge init logs with main log type Andrew Rybchenko
2018-03-21 11:28 ` [dpdk-dev] [PATCH v3 5/6] net/sfc: remove dedicated init log parameter Andrew Rybchenko
2018-03-21 11:28 ` [dpdk-dev] [PATCH v3 6/6] net/sfc: add dynamic log level for MCDI messages Andrew Rybchenko
2018-03-22 10:22 ` [dpdk-dev] [PATCH v3 0/6] net/sfc: implement dynamic logging Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521631701-11282-4-git-send-email-arybchenko@solarflare.com \
--to=arybchenko@solarflare.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=ivan.malov@oktetlabs.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).