* [dpdk-dev] [PATCH v1 1/3] lib/cryptodev: add support for asymmetric crypto op
2018-03-27 12:54 [dpdk-dev] [PATCH v1 0/3] lib/cryptodev: add support of asymmetric crypto Shally Verma
@ 2018-03-27 12:54 ` Shally Verma
2018-03-27 12:54 ` [dpdk-dev] [PATCH v1 2/3] lib/cryptodev: add asymmetric crypto capability in cryptodev Shally Verma
2018-03-27 12:54 ` [dpdk-dev] [PATCH v1 3/3] lib/cryptodev: add asymmetric algos " Shally Verma
2 siblings, 0 replies; 4+ messages in thread
From: Shally Verma @ 2018-03-27 12:54 UTC (permalink / raw)
To: pablo.de.lara.guarch
Cc: declan.doherty, fiona.trahe, pathreya, ssahu, agupta, dev,
Sunila Sahu, Ashish Gupta
Extend DPDK librte_cryptodev to:
- define asym op type in rte_crypto_op_type and associated
op APIs
- define asym session and associated session APIs
If PMD shows in its feature flag that it supports both sym and
asym then it must support those on all its qps.
Application may choose to direct all asym ops to one qp and all
sym to a different qp to avoid head-of-line blocking, but there
is nothing in the qp setup or capabilities to prevent the
application from sending an enqueue_burst() with a mix of asym
and sym ops all to the same qp and it should work.
If PMD support both but internally has hw with dedicated qp for
each service then it *can* split itself into *symmetric only and
asymmetric only PMD instances*.
List of TBDs:
- change PMD ops session_get_size, session_configure, session_clear
to sym_session_* APIs
- change external get_session_private_size to sym_get_session_*
- per-service stats update
Open for consideration:
- sessionless asymmetric ops.
current proposal only define session based operations.
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
---
lib/librte_cryptodev/Makefile | 1 +
lib/librte_cryptodev/rte_crypto.h | 37 +++++++-
lib/librte_cryptodev/rte_cryptodev.c | 122 ++++++++++++++++++++++++-
lib/librte_cryptodev/rte_cryptodev.h | 81 +++++++++++++++-
lib/librte_cryptodev/rte_cryptodev_pmd.h | 58 +++++++++++-
lib/librte_cryptodev/rte_cryptodev_version.map | 13 +++
6 files changed, 307 insertions(+), 5 deletions(-)
diff --git a/lib/librte_cryptodev/Makefile b/lib/librte_cryptodev/Makefile
index bba8dee9f..6815e6ff3 100644
--- a/lib/librte_cryptodev/Makefile
+++ b/lib/librte_cryptodev/Makefile
@@ -12,6 +12,7 @@ LIBABIVER := 4
# build flags
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
LDLIBS += -lrte_eal -lrte_mempool -lrte_ring -lrte_mbuf
LDLIBS += -lrte_kvargs
diff --git a/lib/librte_cryptodev/rte_crypto.h b/lib/librte_cryptodev/rte_crypto.h
index 95cf8615e..0fdec1bb3 100644
--- a/lib/librte_cryptodev/rte_crypto.h
+++ b/lib/librte_cryptodev/rte_crypto.h
@@ -23,6 +23,7 @@ extern "C" {
#include <rte_common.h>
#include "rte_crypto_sym.h"
+#include "rte_crypto_asym.h"
/** Crypto operation types */
enum rte_crypto_op_type {
@@ -30,6 +31,8 @@ enum rte_crypto_op_type {
/**< Undefined operation type */
RTE_CRYPTO_OP_TYPE_SYMMETRIC,
/**< Symmetric operation */
+ RTE_CRYPTO_OP_TYPE_ASYMMETRIC
+ /**< Asymmetric operation */
};
/** Status of crypto operation */
@@ -97,6 +100,10 @@ struct rte_crypto_op {
union {
struct rte_crypto_sym_op sym[0];
/**< Symmetric operation parameters */
+
+ struct rte_crypto_asym_op asym[0];
+ /**< Asymmetric operation parameters */
+
}; /**< operation specific parameters */
};
@@ -117,6 +124,9 @@ __rte_crypto_op_reset(struct rte_crypto_op *op, enum rte_crypto_op_type type)
case RTE_CRYPTO_OP_TYPE_SYMMETRIC:
__rte_crypto_sym_op_reset(op->sym);
break;
+ case RTE_CRYPTO_OP_TYPE_ASYMMETRIC:
+ __rte_crypto_asym_op_reset(op->asym);
+ break;
case RTE_CRYPTO_OP_TYPE_UNDEFINED:
default:
break;
@@ -283,9 +293,14 @@ __rte_crypto_op_get_priv_data(struct rte_crypto_op *op, uint32_t size)
if (likely(op->mempool != NULL)) {
priv_size = __rte_crypto_op_get_priv_data_size(op->mempool);
- if (likely(priv_size >= size))
- return (void *)((uint8_t *)(op + 1) +
+ if (likely(priv_size >= size)) {
+ if (op->type == RTE_CRYPTO_OP_TYPE_SYMMETRIC)
+ return (void *)((uint8_t *)(op + 1) +
sizeof(struct rte_crypto_sym_op));
+ if (op->type == RTE_CRYPTO_OP_TYPE_ASYMMETRIC)
+ return (void *)((uint8_t *)(op+1) +
+ sizeof(struct rte_crypto_asym_op));
+ }
}
return NULL;
@@ -388,6 +403,24 @@ rte_crypto_op_attach_sym_session(struct rte_crypto_op *op,
return __rte_crypto_sym_op_attach_sym_session(op->sym, sess);
}
+/**
+ * Attach a asymmetric session to a crypto operation
+ *
+ * @param op crypto operation, must be of type asymmetric
+ * @param sess cryptodev session
+ */
+static inline int
+rte_crypto_op_attach_asym_session(struct rte_crypto_op *op,
+ struct rte_cryptodev_asym_session *sess)
+{
+ if (unlikely(op->type != RTE_CRYPTO_OP_TYPE_ASYMMETRIC))
+ return -1;
+
+ op->sess_type = RTE_CRYPTO_OP_WITH_SESSION;
+
+ return __rte_crypto_op_attach_asym_session(op->asym, sess);
+}
+
#ifdef __cplusplus
}
#endif
diff --git a/lib/librte_cryptodev/rte_cryptodev.c b/lib/librte_cryptodev/rte_cryptodev.c
index 8745b6b02..cca8d4cd4 100644
--- a/lib/librte_cryptodev/rte_cryptodev.c
+++ b/lib/librte_cryptodev/rte_cryptodev.c
@@ -1088,13 +1088,62 @@ rte_cryptodev_sym_session_init(uint8_t dev_id,
return 0;
}
+int __rte_experimental
+rte_cryptodev_asym_session_init(uint8_t dev_id,
+ struct rte_cryptodev_asym_session *sess,
+ struct rte_crypto_asym_xform *xforms,
+ struct rte_mempool *mp)
+{
+ struct rte_cryptodev *dev;
+ uint8_t index;
+ int ret;
+
+ dev = rte_cryptodev_pmd_get_dev(dev_id);
+
+ if (sess == NULL || xforms == NULL || dev == NULL)
+ return -EINVAL;
+
+ index = dev->driver_id;
+
+ if (sess->sess_private_data[index] == NULL) {
+ ret = dev->dev_ops->asym_session_configure(dev,
+ xforms,
+ sess, mp);
+ if (ret < 0) {
+ CDEV_LOG_ERR(
+ "dev_id %d failed to configure session details",
+ dev_id);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
struct rte_cryptodev_sym_session *
rte_cryptodev_sym_session_create(struct rte_mempool *mp)
{
struct rte_cryptodev_sym_session *sess;
/* Allocate a session structure from the session pool */
- if (rte_mempool_get(mp, (void **)&sess)) {
+ if (rte_mempool_get(mp, (void *)&sess)) {
+ CDEV_LOG_ERR("couldn't get object from session mempool");
+ return NULL;
+ }
+
+ /* Clear device session pointer */
+ memset(sess, 0, (sizeof(void *) * nb_drivers));
+
+ return sess;
+}
+
+struct rte_cryptodev_asym_session * __rte_experimental
+rte_cryptodev_asym_session_create(struct rte_mempool *mp)
+{
+ struct rte_cryptodev_asym_session *sess;
+
+ /* Allocate a session structure from the session pool */
+ if (rte_mempool_get(mp, (void *)&sess)) {
CDEV_LOG_ERR("couldn't get object from session mempool");
return NULL;
}
@@ -1175,6 +1224,22 @@ rte_cryptodev_sym_session_clear(uint8_t dev_id,
return 0;
}
+int __rte_experimental
+rte_cryptodev_asym_session_clear(uint8_t dev_id,
+ struct rte_cryptodev_asym_session *sess)
+{
+ struct rte_cryptodev *dev;
+
+ dev = rte_cryptodev_pmd_get_dev(dev_id);
+
+ if (dev == NULL || sess == NULL)
+ return -EINVAL;
+
+ dev->dev_ops->asym_session_clear(dev, sess);
+
+ return 0;
+}
+
int
rte_cryptodev_sym_session_free(struct rte_cryptodev_sym_session *sess)
{
@@ -1199,6 +1264,31 @@ rte_cryptodev_sym_session_free(struct rte_cryptodev_sym_session *sess)
return 0;
}
+int __rte_experimental
+rte_cryptodev_asym_session_free(struct rte_cryptodev_asym_session *sess)
+{
+ uint8_t i;
+ void *sess_priv;
+ struct rte_mempool *sess_mp;
+
+ if (sess == NULL)
+ return -EINVAL;
+
+ /* Check that all device private data has been freed */
+ for (i = 0; i < nb_drivers; i++) {
+ sess_priv = get_asym_session_private_data(sess, i);
+ if (sess_priv != NULL)
+ return -EBUSY;
+ }
+
+ /* Return session to mempool */
+ sess_mp = rte_mempool_from_obj(sess);
+ rte_mempool_put(sess_mp, sess);
+
+ return 0;
+}
+
+
unsigned int
rte_cryptodev_get_header_session_size(void)
{
@@ -1238,6 +1328,29 @@ rte_cryptodev_get_private_session_size(uint8_t dev_id)
}
+unsigned int __rte_experimental
+rte_cryptodev_get_asym_session_private_size(uint8_t dev_id)
+{
+ struct rte_cryptodev *dev;
+ unsigned int header_size = sizeof(void *) * nb_drivers;
+ unsigned int priv_sess_size;
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id))
+ return 0;
+
+ dev = rte_cryptodev_pmd_get_dev(dev_id);
+
+ if (*dev->dev_ops->asym_session_get_size == NULL)
+ return 0;
+
+ priv_sess_size = (*dev->dev_ops->asym_session_get_size)(dev);
+ if (priv_sess_size < header_size)
+ return header_size;
+
+ return priv_sess_size;
+
+}
+
/** Initialise rte_crypto_op mempool element */
static void
rte_crypto_op_init(struct rte_mempool *mempool,
@@ -1268,6 +1381,13 @@ rte_crypto_op_pool_create(const char *name, enum rte_crypto_op_type type,
sizeof(struct rte_crypto_sym_op) +
priv_size;
+ if (type == RTE_CRYPTO_OP_TYPE_ASYMMETRIC) {
+ /* override size by size of asym op */
+ elt_size = sizeof(struct rte_crypto_op) +
+ sizeof(struct rte_crypto_asym_op) +
+ priv_size;
+ }
+
/* lookup mempool in case already allocated */
struct rte_mempool *mp = rte_mempool_lookup(name);
diff --git a/lib/librte_cryptodev/rte_cryptodev.h b/lib/librte_cryptodev/rte_cryptodev.h
index c8fa68935..68d1ae19e 100644
--- a/lib/librte_cryptodev/rte_cryptodev.h
+++ b/lib/librte_cryptodev/rte_cryptodev.h
@@ -897,9 +897,14 @@ rte_cryptodev_enqueue_burst(uint8_t dev_id, uint16_t qp_id,
*/
struct rte_cryptodev_sym_session {
__extension__ void *sess_private_data[0];
- /**< Private session material */
+ /**< Private symmetric session material */
};
+/** Cryptodev asymmetric crypto session */
+struct rte_cryptodev_asym_session {
+ __extension__ void *sess_private_data[0];
+ /**< Private asymmetric session material */
+};
/**
* Create symmetric crypto session header (generic with no private data)
@@ -913,6 +918,18 @@ struct rte_cryptodev_sym_session {
struct rte_cryptodev_sym_session *
rte_cryptodev_sym_session_create(struct rte_mempool *mempool);
+/**
+ * Create asymmetric crypto session header (generic with no private data)
+ *
+ * @param mempool mempool to allocate asymmetric session
+ * objects from
+ * @return
+ * - On success return pointer to asym-session
+ * - On failure returns NULL
+ */
+struct rte_cryptodev_asym_session * __rte_experimental
+rte_cryptodev_asym_session_create(struct rte_mempool *mempool);
+
/**
* Frees symmetric crypto session header, after checking that all
* the device private data has been freed, returning it
@@ -928,6 +945,21 @@ rte_cryptodev_sym_session_create(struct rte_mempool *mempool);
int
rte_cryptodev_sym_session_free(struct rte_cryptodev_sym_session *sess);
+/**
+ * Frees asymmetric crypto session header, after checking that all
+ * the device private data has been freed, returning it
+ * to its original mempool.
+ *
+ * @param sess Session header to be freed.
+ *
+ * @return
+ * - 0 if successful.
+ * - -EINVAL if session is NULL.
+ * - -EBUSY if not all device private data has been freed.
+ */
+int __rte_experimental
+rte_cryptodev_asym_session_free(struct rte_cryptodev_asym_session *sess);
+
/**
* Fill out private data for the device id, based on its device type.
*
@@ -949,6 +981,27 @@ rte_cryptodev_sym_session_init(uint8_t dev_id,
struct rte_crypto_sym_xform *xforms,
struct rte_mempool *mempool);
+/**
+ * Initialize asymmetric session on a device with specific asymmetric xform
+ *
+ * @param dev_id ID of device that we want the session to be used on
+ * @param sess Session to be set up on a device
+ * @param xforms Asymmetric crypto transform operations to apply on flow
+ * processed with this session
+ * @param mempool Mempool to be used for internal allocation.
+ *
+ * @return
+ * - On success, zero.
+ * - -EINVAL if input parameters are invalid.
+ * - -ENOTSUP if crypto device does not support the crypto transform.
+ * - -ENOMEM if the private session could not be allocated.
+ */
+int __rte_experimental
+rte_cryptodev_asym_session_init(uint8_t dev_id,
+ struct rte_cryptodev_asym_session *sess,
+ struct rte_crypto_asym_xform *xforms,
+ struct rte_mempool *mempool);
+
/**
* Frees private data for the device id, based on its device type,
* returning it to its mempool.
@@ -964,6 +1017,20 @@ int
rte_cryptodev_sym_session_clear(uint8_t dev_id,
struct rte_cryptodev_sym_session *sess);
+/**
+ * Frees resources held by asymmetric session during rte_cryptodev_session_init
+ *
+ * @param dev_id ID of device that uses the asymmetric session.
+ * @param sess Asymmetric session setup on device using
+ * rte_cryptodev_session_init
+ * @return
+ * - 0 if successful.
+ * - -EINVAL if device is invalid or session is NULL.
+ */
+int __rte_experimental
+rte_cryptodev_asym_session_clear(uint8_t dev_id,
+ struct rte_cryptodev_asym_session *sess);
+
/**
* Get the size of the header session, for all registered drivers.
*
@@ -984,6 +1051,18 @@ rte_cryptodev_get_header_session_size(void);
*/
unsigned int
rte_cryptodev_get_private_session_size(uint8_t dev_id);
+/**
+ * Get the size of the private data for asymmetric session
+ * on device
+ *
+ * @param dev_id The device identifier.
+ *
+ * @return
+ * - Size of the asymmetric private data, if successful
+ * - 0 if device is invalid or does not have private session
+ */
+unsigned int __rte_experimental
+rte_cryptodev_get_asym_session_private_size(uint8_t dev_id);
/**
* Attach queue pair with sym session.
diff --git a/lib/librte_cryptodev/rte_cryptodev_pmd.h b/lib/librte_cryptodev/rte_cryptodev_pmd.h
index 69d776934..615a22586 100644
--- a/lib/librte_cryptodev/rte_cryptodev_pmd.h
+++ b/lib/librte_cryptodev/rte_cryptodev_pmd.h
@@ -302,6 +302,17 @@ typedef int (*cryptodev_sym_create_session_pool_t)(
*/
typedef unsigned (*cryptodev_sym_get_session_private_size_t)(
struct rte_cryptodev *dev);
+/**
+ * Get the size of a asymmetric cryptodev session
+ *
+ * @param dev Crypto device pointer
+ *
+ * @return
+ * - On success returns the size of the session structure for device
+ * - On failure returns 0
+ */
+typedef unsigned int (*cryptodev_asym_get_session_private_size_t)(
+ struct rte_cryptodev *dev);
/**
* Configure a Crypto session on a device.
@@ -321,7 +332,24 @@ typedef int (*cryptodev_sym_configure_session_t)(struct rte_cryptodev *dev,
struct rte_crypto_sym_xform *xform,
struct rte_cryptodev_sym_session *session,
struct rte_mempool *mp);
-
+/**
+ * Configure a Crypto asymmetric session on a device.
+ *
+ * @param dev Crypto device pointer
+ * @param xform Single or chain of crypto xforms
+ * @param priv_sess Pointer to cryptodev's private session structure
+ * @param mp Mempool where the private session is allocated
+ *
+ * @return
+ * - Returns 0 if private session structure have been created successfully.
+ * - Returns -EINVAL if input parameters are invalid.
+ * - Returns -ENOTSUP if crypto device does not support the crypto transform.
+ * - Returns -ENOMEM if the private session could not be allocated.
+ */
+typedef int (*cryptodev_asym_configure_session_t)(struct rte_cryptodev *dev,
+ struct rte_crypto_asym_xform *xform,
+ struct rte_cryptodev_asym_session *session,
+ struct rte_mempool *mp);
/**
* Free driver private session data.
*
@@ -331,6 +359,15 @@ typedef int (*cryptodev_sym_configure_session_t)(struct rte_cryptodev *dev,
typedef void (*cryptodev_sym_free_session_t)(struct rte_cryptodev *dev,
struct rte_cryptodev_sym_session *sess);
+/**
+ * Free asymmetric session private data.
+ *
+ * @param dev Crypto device pointer
+ * @param sess Cryptodev session structure
+ */
+typedef void (*cryptodev_asym_free_session_t)(struct rte_cryptodev *dev,
+ struct rte_cryptodev_asym_session *sess);
+
/**
* Optional API for drivers to attach sessions with queue pair.
* @param dev Crypto device pointer
@@ -384,10 +421,16 @@ struct rte_cryptodev_ops {
cryptodev_sym_get_session_private_size_t session_get_size;
/**< Return private session. */
+ cryptodev_asym_get_session_private_size_t asym_session_get_size;
+ /**< Return asym session private size. */
cryptodev_sym_configure_session_t session_configure;
/**< Configure a Crypto session. */
+ cryptodev_asym_configure_session_t asym_session_configure;
+ /**< Configure asymmetric Crypto session. */
cryptodev_sym_free_session_t session_clear;
/**< Clear a Crypto sessions private data. */
+ cryptodev_asym_free_session_t asym_session_clear;
+ /**< Clear a Crypto sessions private data. */
cryptodev_sym_queue_pair_attach_session_t qp_attach_session;
/**< Attach session to queue pair. */
cryptodev_sym_queue_pair_detach_session_t qp_detach_session;
@@ -535,6 +578,19 @@ set_session_private_data(struct rte_cryptodev_sym_session *sess,
sess->sess_private_data[driver_id] = private_data;
}
+static inline void *
+get_asym_session_private_data(const struct rte_cryptodev_asym_session *sess,
+ uint8_t driver_id) {
+ return sess->sess_private_data[driver_id];
+}
+
+static inline void
+set_asym_session_private_data(struct rte_cryptodev_asym_session *sess,
+ uint8_t driver_id, void *private_data)
+{
+ sess->sess_private_data[driver_id] = private_data;
+}
+
#ifdef __cplusplus
}
#endif
diff --git a/lib/librte_cryptodev/rte_cryptodev_version.map b/lib/librte_cryptodev/rte_cryptodev_version.map
index eb47308b6..d5bd12a6a 100644
--- a/lib/librte_cryptodev/rte_cryptodev_version.map
+++ b/lib/librte_cryptodev/rte_cryptodev_version.map
@@ -85,3 +85,16 @@ DPDK_17.11 {
rte_cryptodev_pmd_parse_input_args;
} DPDK_17.08;
+
+EXPERIMENTAL {
+ global:
+
+ rte_cryptodev_asym_session_clear;
+ rte_cryptodev_asym_session_create;
+ rte_cryptodev_asym_session_free;
+ rte_cryptodev_asym_session_init;
+ rte_cryptodev_get_asym_session_private_size;
+
+ local: *;
+};
+
--
2.14.3
^ permalink raw reply [flat|nested] 4+ messages in thread* [dpdk-dev] [PATCH v1 2/3] lib/cryptodev: add asymmetric crypto capability in cryptodev
2018-03-27 12:54 [dpdk-dev] [PATCH v1 0/3] lib/cryptodev: add support of asymmetric crypto Shally Verma
2018-03-27 12:54 ` [dpdk-dev] [PATCH v1 1/3] lib/cryptodev: add support for asymmetric crypto op Shally Verma
@ 2018-03-27 12:54 ` Shally Verma
2018-03-27 12:54 ` [dpdk-dev] [PATCH v1 3/3] lib/cryptodev: add asymmetric algos " Shally Verma
2 siblings, 0 replies; 4+ messages in thread
From: Shally Verma @ 2018-03-27 12:54 UTC (permalink / raw)
To: pablo.de.lara.guarch
Cc: declan.doherty, fiona.trahe, pathreya, ssahu, agupta, dev,
Sunila Sahu, Ashish Gupta
Extend cryptodev with asymmetric capability APIs and
definitions.
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
---
lib/librte_cryptodev/rte_cryptodev.c | 96 ++++++++++++++++++++++
lib/librte_cryptodev/rte_cryptodev.h | 105 ++++++++++++++++++++++++-
lib/librte_cryptodev/rte_cryptodev_version.map | 4 +
3 files changed, 204 insertions(+), 1 deletion(-)
diff --git a/lib/librte_cryptodev/rte_cryptodev.c b/lib/librte_cryptodev/rte_cryptodev.c
index cca8d4cd4..f1e9f7d70 100644
--- a/lib/librte_cryptodev/rte_cryptodev.c
+++ b/lib/librte_cryptodev/rte_cryptodev.c
@@ -166,6 +166,31 @@ rte_crypto_aead_operation_strings[] = {
[RTE_CRYPTO_AEAD_OP_DECRYPT] = "decrypt"
};
+/**
+ * Asymmetric crypto transform operation strings identifiers.
+ */
+const char *rte_crypto_asym_xform_strings[] = {
+ [RTE_CRYPTO_ASYM_XFORM_NONE] = "none",
+ [RTE_CRYPTO_ASYM_XFORM_RSA] = "rsa",
+ [RTE_CRYPTO_ASYM_XFORM_MODEX] = "modexp",
+ [RTE_CRYPTO_ASYM_XFORM_MODINV] = "modinv",
+ [RTE_CRYPTO_ASYM_XFORM_DH] = "dh",
+ [RTE_CRYPTO_ASYM_XFORM_DSA] = "dsa",
+};
+
+/**
+ * Asymmetric crypto operation strings identifiers.
+ */
+const char *rte_crypto_asym_op_strings[] = {
+ [RTE_CRYPTO_ASYM_OP_ENCRYPT] = "encrypt",
+ [RTE_CRYPTO_ASYM_OP_DECRYPT] = "decrypt",
+ [RTE_CRYPTO_ASYM_OP_SIGN] = "sign",
+ [RTE_CRYPTO_ASYM_OP_VERIFY] = "verify",
+ [RTE_CRYPTO_ASYM_OP_PRIVATE_KEY_GENERATE] = "priv_key_generate",
+ [RTE_CRYPTO_ASYM_OP_PUBLIC_KEY_GENERATE] = "pub_key_generate",
+ [RTE_CRYPTO_ASYM_OP_SHARED_SECRET_COMPUTE] = "sharedsecret_compute",
+};
+
int
rte_cryptodev_get_cipher_algo_enum(enum rte_crypto_cipher_algorithm *algo_enum,
const char *algo_string)
@@ -217,6 +242,24 @@ rte_cryptodev_get_aead_algo_enum(enum rte_crypto_aead_algorithm *algo_enum,
return -1;
}
+int __rte_experimental
+rte_cryptodev_get_asym_xform_enum(enum rte_crypto_asym_xform_type *xform_enum,
+ const char *xform_string)
+{
+ unsigned int i;
+
+ for (i = 1; i < RTE_DIM(rte_crypto_asym_xform_strings); i++) {
+ if (strcmp(xform_string,
+ rte_crypto_asym_xform_strings[i]) == 0) {
+ *xform_enum = (enum rte_crypto_asym_xform_type) i;
+ return 0;
+ }
+ }
+
+ /* Invalid string */
+ return -1;
+}
+
/**
* The crypto auth operation strings identifiers.
* It could be used in application command line.
@@ -262,6 +305,28 @@ rte_cryptodev_sym_capability_get(uint8_t dev_id,
}
+const struct rte_cryptodev_asymmetric_xfrm_capability * __rte_experimental
+rte_cryptodev_asym_capability_get(uint8_t dev_id,
+ const struct rte_cryptodev_asym_capability_idx *idx)
+{
+ const struct rte_cryptodev_capabilities *capability;
+ struct rte_cryptodev_info dev_info;
+ unsigned int i = 0;
+
+ memset(&dev_info, 0, sizeof(struct rte_cryptodev_info));
+ rte_cryptodev_info_get(dev_id, &dev_info);
+
+ while ((capability = &dev_info.capabilities[i++])->op !=
+ RTE_CRYPTO_OP_TYPE_UNDEFINED) {
+ if (capability->op != RTE_CRYPTO_OP_TYPE_ASYMMETRIC)
+ continue;
+
+ if (capability->asym.xform_type == idx->type)
+ return &capability->asym.xfrm_capa;
+ }
+ return NULL;
+};
+
#define param_range_check(x, y) \
(((x < y.min) || (x > y.max)) || \
(y.increment != 0 && (x % y.increment) != 0))
@@ -317,6 +382,37 @@ rte_cryptodev_sym_capability_check_aead(
return 0;
}
+int __rte_experimental
+rte_cryptodev_asym_xfrm_capability_check_optype(
+ const struct rte_cryptodev_asymmetric_xfrm_capability *capability,
+ enum rte_crypto_asym_op_type op_type)
+{
+ if (capability->op_types & (1 << op_type))
+ return 1;
+
+ return 0;
+}
+
+int __rte_experimental
+rte_cryptodev_asym_xfrm_capability_check_modlen(
+ const struct rte_cryptodev_asymmetric_xfrm_capability *capability,
+ uint16_t modlen)
+{
+ /* handle special case of 0 which mean PMD define no limit defined */
+ if ((capability->modlen.min != 0) &&
+ ((modlen < capability->modlen.min) ||
+ (capability->modlen.increment != 0 &&
+ (modlen % (capability->modlen.increment)))))
+ return -1;
+ if ((capability->modlen.max != 0) &&
+ ((modlen > capability->modlen.max) ||
+ (capability->modlen.increment != 0 &&
+ (modlen % (capability->modlen.increment)))))
+ return -1;
+
+ return 0;
+}
+
const char *
rte_cryptodev_get_feature_name(uint64_t flag)
diff --git a/lib/librte_cryptodev/rte_cryptodev.h b/lib/librte_cryptodev/rte_cryptodev.h
index 68d1ae19e..deae3d656 100644
--- a/lib/librte_cryptodev/rte_cryptodev.h
+++ b/lib/librte_cryptodev/rte_cryptodev.h
@@ -178,6 +178,37 @@ struct rte_cryptodev_symmetric_capability {
};
};
+/**
+ * Asymmetric Xform Crypto Capability
+ *
+ */
+struct rte_cryptodev_asymmetric_xfrm_capability {
+ enum rte_crypto_asym_xform_type xform_type;
+ /**< Transform type: RSA/MODEXP/DH/DSA/MODINV */
+
+ uint32_t op_types;
+ /**< bitmask for supported rte_crypto_asym_op_type */
+
+ __extension__
+ union {
+ struct rte_crypto_param_range modlen;
+ /**< Range of modulus length supported by modulus based xform.
+ * Value 0 mean implementation default
+ */
+ };
+};
+
+/**
+ * Asymmetric Crypto Capability
+ *
+ */
+struct rte_cryptodev_asymmetric_capability {
+ enum rte_crypto_asym_xform_type xform_type;
+ /**< Transform type: RSA/MODEXP/DH/DSA/MODINV */
+ struct rte_cryptodev_asymmetric_xfrm_capability xfrm_capa;
+};
+
+
/** Structure used to capture a capability of a crypto device */
struct rte_cryptodev_capabilities {
enum rte_crypto_op_type op;
@@ -187,6 +218,8 @@ struct rte_cryptodev_capabilities {
union {
struct rte_cryptodev_symmetric_capability sym;
/**< Symmetric operation capability parameters */
+ struct rte_cryptodev_asymmetric_capability asym;
+ /**< Asymmetric operation capability parameters */
};
};
@@ -201,7 +234,17 @@ struct rte_cryptodev_sym_capability_idx {
};
/**
- * Provide capabilities available for defined device and algorithm
+ * Structure used to describe asymmetric crypto xforms
+ * Each xform maps to one asym algorithm.
+ *
+ */
+struct rte_cryptodev_asym_capability_idx {
+ enum rte_crypto_asym_xform_type type;
+ /**< Asymmetric xform (algo) type */
+};
+
+/**
+ * Provide capabilities available for defined device and algorithm
*
* @param dev_id The identifier of the device.
* @param idx Description of crypto algorithms.
@@ -214,6 +257,20 @@ const struct rte_cryptodev_symmetric_capability *
rte_cryptodev_sym_capability_get(uint8_t dev_id,
const struct rte_cryptodev_sym_capability_idx *idx);
+/**
+ * Provide capabilities available for defined device and algorithm
+ *
+ * @param dev_id The identifier of the device.
+ * @param algo Description of crypto algorithms.
+ *
+ * @return
+ * - Return description of the asymmetric crypto capability if exist.
+ * - Return NULL if the capability not exist.
+ */
+const struct rte_cryptodev_asymmetric_xfrm_capability * __rte_experimental
+rte_cryptodev_asym_capability_get(uint8_t dev_id,
+ const struct rte_cryptodev_asym_capability_idx *idx);
+
/**
* Check if key size and initial vector are supported
* in crypto cipher capability
@@ -269,6 +326,36 @@ rte_cryptodev_sym_capability_check_aead(
uint16_t key_size, uint16_t digest_size, uint16_t aad_size,
uint16_t iv_size);
+/**
+ * Check if op type is supported
+ *
+ * @param capability Description of the asymmetric crypto capability.
+ * @param op_type op type
+ *
+ * @return
+ * - Return 1 if the op type is supported
+ * - Return 0 if unsupported
+ */
+int __rte_experimental
+rte_cryptodev_asym_xfrm_capability_check_optype(
+ const struct rte_cryptodev_asymmetric_xfrm_capability *capability,
+ enum rte_crypto_asym_op_type op_type);
+
+/**
+ * Check if modulus length is in supported range
+ *
+ * @param capability Description of the asymmetric crypto capability.
+ * @param modlen modulus length.
+ *
+ * @return
+ * - Return 0 if the parameters are in range of the capability.
+ * - Return -1 if the parameters are out of range of the capability.
+ */
+int __rte_experimental
+rte_cryptodev_asym_xfrm_capability_check_modlen(
+ const struct rte_cryptodev_asymmetric_xfrm_capability *capability,
+ uint16_t modlen);
+
/**
* Provide the cipher algorithm enum, given an algorithm string
*
@@ -314,6 +401,22 @@ int
rte_cryptodev_get_aead_algo_enum(enum rte_crypto_aead_algorithm *algo_enum,
const char *algo_string);
+/**
+ * Provide the Asymmetric xform enum, given an xform string
+ *
+ * @param xform_enum A pointer to the xform type
+ * enum to be filled
+ * @param xform_string xform string
+ *
+ * @return
+ * - Return -1 if string is not valid
+ * - Return 0 if the string is valid
+ */
+int __rte_experimental
+rte_cryptodev_get_asym_xform_enum(enum rte_crypto_asym_xform_type *xform_enum,
+ const char *xform_string);
+
+
/** Macro used at end of crypto PMD list */
#define RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() \
{ RTE_CRYPTO_OP_TYPE_UNDEFINED }
diff --git a/lib/librte_cryptodev/rte_cryptodev_version.map b/lib/librte_cryptodev/rte_cryptodev_version.map
index d5bd12a6a..e7cef19f2 100644
--- a/lib/librte_cryptodev/rte_cryptodev_version.map
+++ b/lib/librte_cryptodev/rte_cryptodev_version.map
@@ -89,11 +89,15 @@ DPDK_17.11 {
EXPERIMENTAL {
global:
+ rte_cryptodev_asym_capability_get;
rte_cryptodev_asym_session_clear;
rte_cryptodev_asym_session_create;
rte_cryptodev_asym_session_free;
rte_cryptodev_asym_session_init;
+ rte_cryptodev_asym_xfrm_capability_check_modlen;
+ rte_cryptodev_asym_xfrm_capability_check_optype;
rte_cryptodev_get_asym_session_private_size;
+ rte_cryptodev_get_asym_xform_enum;
local: *;
};
--
2.14.3
^ permalink raw reply [flat|nested] 4+ messages in thread* [dpdk-dev] [PATCH v1 3/3] lib/cryptodev: add asymmetric algos in cryptodev
2018-03-27 12:54 [dpdk-dev] [PATCH v1 0/3] lib/cryptodev: add support of asymmetric crypto Shally Verma
2018-03-27 12:54 ` [dpdk-dev] [PATCH v1 1/3] lib/cryptodev: add support for asymmetric crypto op Shally Verma
2018-03-27 12:54 ` [dpdk-dev] [PATCH v1 2/3] lib/cryptodev: add asymmetric crypto capability in cryptodev Shally Verma
@ 2018-03-27 12:54 ` Shally Verma
2 siblings, 0 replies; 4+ messages in thread
From: Shally Verma @ 2018-03-27 12:54 UTC (permalink / raw)
To: pablo.de.lara.guarch
Cc: declan.doherty, fiona.trahe, pathreya, ssahu, agupta, dev,
Sunila Sahu, Ashish Gupta
Add rte_crypto_asym.h with supported algo enumerations
and associated xforms and op structures.
API currently supports:
RSA,
Modular Exponentiation,
Modular Inverse,
DSA,
Deffie-hellman
And op_types:
Encryption,
Decryption,
Sign,
Verify,
Deffie-hellman private key exchange,
Deffie-hellman public key exchange,
Deffie-hellman shared secret compute,
Application can setup deffie-hellman xform to do public
key generation or private key generation or shared secret
compute. It can also setup a xform chain with public and
private key generate xform to generate both public and
private key pair.
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
---
TODO:
Add elliptic curve support.
---
---
lib/librte_cryptodev/Makefile | 2 +-
lib/librte_cryptodev/rte_crypto_asym.h | 519 +++++++++++++++++++++++++++++++++
2 files changed, 520 insertions(+), 1 deletion(-)
diff --git a/lib/librte_cryptodev/Makefile b/lib/librte_cryptodev/Makefile
index 6815e6ff3..93f9d2d45 100644
--- a/lib/librte_cryptodev/Makefile
+++ b/lib/librte_cryptodev/Makefile
@@ -24,7 +24,7 @@ SYMLINK-y-include += rte_crypto.h
SYMLINK-y-include += rte_crypto_sym.h
SYMLINK-y-include += rte_cryptodev.h
SYMLINK-y-include += rte_cryptodev_pmd.h
-
+SYMLINK-y-include += rte_crypto_asym.h
# versioning export map
EXPORT_MAP := rte_cryptodev_version.map
diff --git a/lib/librte_cryptodev/rte_crypto_asym.h b/lib/librte_cryptodev/rte_crypto_asym.h
new file mode 100644
index 000000000..d0e2f1d40
--- /dev/null
+++ b/lib/librte_cryptodev/rte_crypto_asym.h
@@ -0,0 +1,519 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2017-2018 Cavium Networks
+ */
+
+#ifndef _RTE_CRYPTO_ASYM_H_
+#define _RTE_CRYPTO_ASYM_H_
+
+/**
+ * @file rte_crypto_asym.h
+ *
+ * RTE Definitions for Asymmetric Cryptography
+ *
+ * Defines asymmetric algorithms and modes, as well as supported
+ * asymmetric crypto operations.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <string.h>
+#include <stdint.h>
+#include <rte_memory.h>
+#include <rte_mempool.h>
+#include <rte_common.h>
+
+typedef struct rte_crypto_param_t {
+ uint8_t *data;
+ /**< pointer to buffer holding data */
+ rte_iova_t iova;
+ /**< IO address of data buffer */
+ size_t length;
+ /**< length of data in bytes */
+} rte_crypto_param;
+
+/** asym xform type name strings */
+extern const char *
+rte_crypto_asym_xform_strings[];
+
+/** asym operations type name strings */
+extern const char *
+rte_crypto_asym_op_strings[];
+
+/**
+ * Asymmetric crypto transformation types.
+ * Each xform type maps to one asymmetric algorithm
+ * performing specific operation
+ *
+ */
+enum rte_crypto_asym_xform_type {
+ RTE_CRYPTO_ASYM_XFORM_UNSPECIFIED = 0,
+ /**< Invalid xform. */
+ RTE_CRYPTO_ASYM_XFORM_NONE,
+ /**< Xform type None.
+ * May be supported by PMD to support
+ * passthrough op for debugging purpose.
+ * if xform_type none , op_type is disregarded.
+ */
+ RTE_CRYPTO_ASYM_XFORM_RSA,
+ /**< RSA. Performs Encrypt, Decrypt, Sign and Verify.
+ * Refer to rte_crypto_asym_op_type
+ */
+ RTE_CRYPTO_ASYM_XFORM_DH,
+ /**< Deffie-Hellman.
+ * Performs Key Generate and Shared Secret Compute.
+ * Refer to rte_crypto_asym_op_type
+ */
+ RTE_CRYPTO_ASYM_XFORM_DSA,
+ /**< Digital Signature Algorithm
+ * Performs Signature Generation and Verification.
+ * Refer to rte_crypto_asym_op_type
+ */
+ RTE_CRYPTO_ASYM_XFORM_MODINV,
+ /**< Modular Inverse
+ * Perform Modulus inverse b^(-1) mod n
+ */
+ RTE_CRYPTO_ASYM_XFORM_MODEX,
+ /**< Modular Exponentiation
+ * Perform Modular Exponentiation b^e mod n
+ */
+ RTE_CRYPTO_ASYM_XFORM_TYPE_LIST_END
+ /**< End of list */
+};
+
+/**
+ * Asymmetric crypto operation type variants
+ */
+enum rte_crypto_asym_op_type {
+ RTE_CRYPTO_ASYM_OP_ENCRYPT,
+ /**< Asymmetric Encrypt operation */
+ RTE_CRYPTO_ASYM_OP_DECRYPT,
+ /**< Asymmetric Decrypt operation */
+ RTE_CRYPTO_ASYM_OP_SIGN,
+ /**< Signature Generation operation */
+ RTE_CRYPTO_ASYM_OP_VERIFY,
+ /**< Signature Verification operation */
+ RTE_CRYPTO_ASYM_OP_PRIVATE_KEY_GENERATE,
+ /**< DH Private Key generation operation */
+ RTE_CRYPTO_ASYM_OP_PUBLIC_KEY_GENERATE,
+ /**< DH Public Key generation operation */
+ RTE_CRYPTO_ASYM_OP_SHARED_SECRET_COMPUTE,
+ /**< DH Shared Secret compute operation */
+ RTE_CRYPTO_ASYM_OP_LIST_END
+};
+
+/**
+ * Padding types for RSA signature.
+ */
+enum rte_crypto_rsa_padding_type {
+ RTE_CRYPTO_RSA_PADDING_NONE = 0,
+ /**< RSA no padding scheme */
+ RTE_CRYPTO_RSA_PKCS1_V1_5_BT0,
+ /**< RSA PKCS#1 V1.5 Block Type 0 padding scheme
+ * as descibed in rfc2313
+ */
+ RTE_CRYPTO_RSA_PKCS1_V1_5_BT1,
+ /**< RSA PKCS#1 V1.5 Block Type 01 padding scheme
+ * as descibed in rfc2313
+ */
+ RTE_CRYPTO_RSA_PKCS1_V1_5_BT2,
+ /**< RSA PKCS#1 V1.5 Block Type 02 padding scheme
+ * as descibed in rfc2313
+ */
+ RTE_CRYPTO_RSA_PADDING_OAEP,
+ /**< RSA PKCS#1 OAEP padding scheme */
+ RTE_CRYPTO_RSA_PADDING_PSS,
+ /**< RSA PKCS#1 PSS padding scheme */
+ RTE_CRYPTO_RSA_PADDING_TYPE_LIST_END
+};
+
+/**
+ * RSA private key type enumeration
+ *
+ * enumerates private key format required to perform RSA crypto
+ * transform.
+ *
+ */
+enum rte_crypto_rsa_priv_key_type {
+ RTE_RSA_KEY_TYPE_EXP,
+ /**< RSA private key is an exponent */
+ RTE_RSA_KET_TYPE_QT,
+ /**< RSA private key is in quintuple format
+ * See rte_crypto_rsa_priv_key_qt
+ */
+};
+
+/**
+ * Structure describing RSA private key in quintuple format.
+ * See PKCS V1.5 RSA Cryptography Standard.
+ */
+struct rte_crypto_rsa_priv_key_qt {
+ rte_crypto_param p;
+ /**< p - Private key component P
+ * Private key component of RSA parameter required for CRT method
+ * of private key operations in Octet-string network byte order
+ * format.
+ */
+
+ rte_crypto_param q;
+ /**< q - Private key component Q
+ * Private key component of RSA parameter required for CRT method
+ * of private key operations in Octet-string network byte order
+ * format.
+ */
+
+ rte_crypto_param dP;
+ /**< dP - Private CRT component
+ * Private CRT component of RSA parameter required for CRT method
+ * RSA private key operations in Octet-string network byte order
+ * format.
+ * dP = d mod ( p - 1 )
+ */
+
+ rte_crypto_param dQ;
+ /**< dQ - Private CRT component
+ * Private CRT component of RSA parameter required for CRT method
+ * RSA private key operations in Octet-string network byte order
+ * format.
+ * dQ = d mod ( q - 1 )
+ */
+
+ rte_crypto_param qInv;
+ /**< qInv - Private CRT component
+ * Private CRT component of RSA parameter required for CRT method
+ * RSA private key operations in Octet-string network byte order
+ * format.
+ * qInv = inv q mod p
+ */
+};
+
+/**
+ * Asymmetric RSA transform data
+ *
+ * Structure describing RSA xform params
+ *
+ */
+struct rte_crypto_rsa_xform {
+ rte_crypto_param n;
+ /**< n - Prime modulus
+ * Prime modulus data of RSA operation in Octet-string network
+ * byte order format.
+ */
+
+ rte_crypto_param e;
+ /**< e - Public key exponent
+ * Public key exponent used for RSA public key operations in Octet-
+ * string network byte order format.
+ */
+
+ enum rte_crypto_rsa_priv_key_type key_type;
+
+ union {
+ rte_crypto_param d;
+ /**< d - Private key exponent
+ * Private key exponent used for RSA
+ * private key operations in
+ * Octet-string network byte order format.
+ */
+
+ struct rte_crypto_rsa_priv_key_qt qt;
+ /**< qt - Private key in quintuple format */
+ };
+};
+
+/**
+ * Asymmetric Modular exponentiation transform data
+ *
+ * Structure describing modular exponentation xform param
+ *
+ */
+struct rte_crypto_modex_xform {
+ rte_crypto_param modulus;
+ /**< modulus
+ * Prime modulus of the modexp transform operation in octet-string
+ * network byte order format.
+ */
+
+ rte_crypto_param exponent;
+ /**< exponent
+ * Private exponent of the modexp transform operation in
+ * octet-string network byte order format.
+ */
+};
+
+/**
+ * Asymmetric modular inverse transform operation
+ *
+ * Structure describing modulus inverse xform params
+ *
+ */
+struct rte_crypto_modinv_xform {
+ rte_crypto_param modulus;
+ /**<
+ * Pointer to the prime modulus data for modular
+ * inverse operation in octet-string network byte
+ * order format.
+ */
+};
+
+/**
+ * Asymmetric DH transform data
+ *
+ * Structure describing deffie-hellman xform params
+ *
+ */
+struct rte_crypto_dh_xform {
+ enum rte_crypto_asym_op_type type;
+ /**< Setup xform for key generate or shared secret compute */
+
+ rte_crypto_param p;
+ /**< p : Prime modulus data
+ * DH prime modulous data in octet-string network byte order format.
+ *
+ */
+
+ rte_crypto_param g;
+ /**< g : Generator
+ * DH group generator data in octet-string network byte order
+ * format.
+ *
+ */
+};
+
+/**
+ * Asymmetric Digital Signature transform operation
+ *
+ * Structure describing DSA xform params
+ *
+ */
+struct rte_crypto_dsa_xform {
+ rte_crypto_param p;
+ /**< p - Prime modulus
+ * Prime modulus data for DSA operation in Octet-string network byte
+ * order format.
+ */
+ rte_crypto_param q;
+ /**< q : Order of the subgroup.
+ * Order of the subgroup data in Octet-string network byte order
+ * format.
+ * (p-1) % q = 0
+ */
+ rte_crypto_param g;
+ /**< g: Generator of the subgroup
+ * Generator data in Octet-string network byte order format.
+ */
+ rte_crypto_param x;
+ /**< x: Private key of the signer in octet-string network
+ * byte order format.
+ * Used when app has pre-defined private key.
+ * Valid only when xform chain is DSA ONLY.
+ * if xform chain is DH private key generate + DSA, then DSA sign
+ * compute will use internally generated key.
+ */
+};
+
+/**
+ * Operations params for modular operations:
+ * exponentiation and invert
+ *
+ */
+struct rte_crypto_mod_op_param {
+ rte_crypto_param base;
+ /**<
+ * Pointer to base of modular exponentiation/inversion data in
+ * Octet-string network byte order format.
+ */
+};
+
+/**
+ * Asymmetric crypto transform data
+ *
+ * Structure describing asym xforms.
+ */
+struct rte_crypto_asym_xform {
+ struct rte_crypto_asym_xform *next;
+ /**< Pointer to next xform to set up xform chain.*/
+ enum rte_crypto_asym_xform_type xform_type;
+ /**< Asymmetric crypto transform */
+
+ __extension__
+ union {
+ struct rte_crypto_rsa_xform rsa;
+ /**< RSA xform parameters */
+
+ struct rte_crypto_modex_xform modex;
+ /**< Modular Exponentiation xform parameters */
+
+ struct rte_crypto_modinv_xform modinv;
+ /**< Modulus Inverse xform parameters */
+
+ struct rte_crypto_dh_xform dh;
+ /**< DH xform parameters */
+
+ struct rte_crypto_dsa_xform dsa;
+ /**< DSA xform parameters */
+ };
+};
+
+struct rte_cryptodev_asym_session;
+
+/**
+ * RSA operation params
+ *
+ */
+struct rte_crypto_rsa_op_param {
+ enum rte_crypto_asym_op_type op_type;
+ /**< Type of RSA operation for transform */;
+
+ rte_crypto_param message;
+ /**<
+ * Pointer to data
+ * - to be encrypted for RSA public encrypt.
+ * - to be decrypted for RSA private decrypt.
+ * - to be signed for RSA sign generation.
+ * - to be authenticated for RSA sign verification.
+ */
+
+ rte_crypto_param sign;
+ /**<
+ * Pointer to RSA signature data. If operation is RSA
+ * sign @ref RTE_CRYPTO_RSA_OP_SIGN, buffer will be
+ * over-written with generated signature.
+ *
+ * Length of the signature data will be equal to the
+ * RSA prime modulus length.
+ */
+
+ enum rte_crypto_rsa_padding_type pad;
+ /**< RSA padding scheme to be used for transform */
+
+ enum rte_crypto_auth_algorithm md;
+ /**< Hash algorithm to be used for data hash if padding
+ * scheme is either OAEP or PSS. Valid hash algorithms
+ * are:
+ * MD5, SHA1, SHA224, SHA256, SHA384, SHA512
+ */
+
+ enum rte_crypto_auth_algorithm mgf1md;
+ /**<
+ * Hash algorithm to be used for mask generation if
+ * padding scheme is either OAEP or PSS. If padding
+ * scheme is unspecified data hash algorithm is used
+ * for mask generation. Valid hash algorithms are:
+ * MD5, SHA1, SHA224, SHA256, SHA384, SHA512
+ */
+};
+
+/**
+ * Deffie-Hellman Operations params.
+ * @note:
+ */
+struct rte_crypto_dh_op_param {
+ rte_crypto_param pub_key;
+ /**<
+ * Output generated public key when xform type is
+ * DH PUB_KEY_GENERATION.
+ * Input peer public key when xform type is DH
+ * SHARED_SECRET_COMPUTATION
+ * pub_key is in octet-string network byte order format.
+ *
+ */
+
+ rte_crypto_param priv_key;
+ /**<
+ * Output generated private key if xform type is
+ * DH PRIVATE_KEY_GENERATION
+ * Input when xform type is DH SHARED_SECRET_COMPUTATION.
+ * priv_key is in octet-string network byte order format.
+ *
+ */
+
+ rte_crypto_param shared_secret;
+ /**<
+ * Output with calculated shared secret
+ * when dh xform set up with op type = SHARED_SECRET_COMPUTATION.
+ * shared_secret is an octet-string network byte order format.
+ *
+ */
+};
+
+/**
+ * DSA Operations params
+ *
+ */
+struct rte_crypto_dsa_op_param {
+ enum rte_crypto_asym_op_type op_type;
+ /**< Signature Generation or Verification */
+ rte_crypto_param message;
+ /**< input message to be signed or verified */
+ rte_crypto_param r;
+ /**< dsa sign component 'r' value
+ *
+ * output if op_type = sign generate,
+ * input if op_type = sign verify
+ */
+ rte_crypto_param s;
+ /**< dsa sign component 's' value
+ *
+ * output if op_type = sign generate,
+ * input if op_type = sign verify
+ */
+ rte_crypto_param y;
+ /**< y : Public key of the signer.
+ * Public key data of the signer in Octet-string network byte order
+ * format.
+ * y = g^x mod p
+ */
+};
+
+/**
+ * Asymmetric Cryptographic Operation.
+ *
+ * Structure describing asymmetric crypto operation params.
+ *
+ */
+struct rte_crypto_asym_op {
+ struct rte_cryptodev_asym_session *session;
+ /**< Handle for the initialised session context */
+
+ __extension__
+ union {
+ struct rte_crypto_rsa_op_param rsa;
+ struct rte_crypto_mod_op_param modex;
+ struct rte_crypto_mod_op_param modinv;
+ struct rte_crypto_dh_op_param dh;
+ struct rte_crypto_dsa_op_param dsa;
+ };
+} __rte_cache_aligned;
+
+/**
+ * Reset the fields of an asymmetric operation to their default values.
+ *
+ * @param op The crypto operation to be reset.
+ */
+static inline void
+__rte_crypto_asym_op_reset(struct rte_crypto_asym_op *op)
+{
+ memset(op, 0, sizeof(*op));
+}
+
+/**
+ * Attach a session to an asymmetric crypto operation
+ *
+ * @param asym_op crypto operation
+ * @param sess cryptodev session
+ */
+static inline int
+__rte_crypto_op_attach_asym_session(struct rte_crypto_asym_op *asym_op,
+ struct rte_cryptodev_asym_session *sess)
+{
+ asym_op->session = sess;
+ return 0;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_CRYPTO_ASYM_H_ */
--
2.14.3
^ permalink raw reply [flat|nested] 4+ messages in thread