[dpdk-dev] [PATCH 1/2] net/sfc: support loopback mode configuration

[Andrew Rybchenko <arybchenko@solarflare.com>]

All loopback modes are listed in efx_loopback_type_t.
Available loopback modes are listed per link speed in
the enc_loopback_types member of the efx_nic_cfg_t.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
---
 doc/guides/nics/sfc_efx.rst |  4 ++--
 drivers/net/sfc/efsys.h     |  2 +-
 drivers/net/sfc/sfc.c       |  2 ++
 drivers/net/sfc/sfc_port.c  | 40 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 45 insertions(+), 3 deletions(-)

diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index c170e36..abaed67 100644
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -88,6 +88,8 @@ SFC EFX PMD has support for:
 
 - Flow API
 
+- Loopback
+
 
 Non-supported Features
 ----------------------
@@ -98,8 +100,6 @@ The features not yet supported include:
 
 - Priority-based flow control
 
-- Loopback
-
 - Configurable RX CRC stripping (always stripped)
 
 - Header split on receive
diff --git a/drivers/net/sfc/efsys.h b/drivers/net/sfc/efsys.h
index b3dae6e..52c5bd5 100644
--- a/drivers/net/sfc/efsys.h
+++ b/drivers/net/sfc/efsys.h
@@ -166,7 +166,7 @@ prefetch_read_once(const volatile void *addr)
 
 #define EFSYS_OPT_MAC_STATS 1
 
-#define EFSYS_OPT_LOOPBACK 0
+#define EFSYS_OPT_LOOPBACK 1
 
 #define EFSYS_OPT_MON_MCDI 0
 #define EFSYS_OPT_MON_STATS 0
diff --git a/drivers/net/sfc/sfc.c b/drivers/net/sfc/sfc.c
index e456bca..2eefe00 100644
--- a/drivers/net/sfc/sfc.c
+++ b/drivers/net/sfc/sfc.c
@@ -123,10 +123,12 @@ sfc_check_conf(struct sfc_adapter *sa)
 		rc = EINVAL;
 	}
 
+#if !EFSYS_OPT_LOOPBACK
 	if (conf->lpbk_mode != 0) {
 		sfc_err(sa, "Loopback not supported");
 		rc = EINVAL;
 	}
+#endif
 
 	if (conf->dcb_capability_en != 0) {
 		sfc_err(sa, "Priority-based flow control not supported");
diff --git a/drivers/net/sfc/sfc_port.c b/drivers/net/sfc/sfc_port.c
index fd267e1..5cc3ad7 100644
--- a/drivers/net/sfc/sfc_port.c
+++ b/drivers/net/sfc/sfc_port.c
@@ -121,6 +121,28 @@ sfc_port_init_dev_link(struct sfc_adapter *sa)
 	return 0;
 }
 
+#if EFSYS_OPT_LOOPBACK
+
+static efx_link_mode_t
+sfc_port_phy_caps_to_max_link_speed(uint32_t phy_caps)
+{
+	if (phy_caps & (1u << EFX_PHY_CAP_100000FDX))
+		return EFX_LINK_100000FDX;
+	if (phy_caps & (1u << EFX_PHY_CAP_50000FDX))
+		return EFX_LINK_50000FDX;
+	if (phy_caps & (1u << EFX_PHY_CAP_40000FDX))
+		return EFX_LINK_40000FDX;
+	if (phy_caps & (1u << EFX_PHY_CAP_25000FDX))
+		return EFX_LINK_25000FDX;
+	if (phy_caps & (1u << EFX_PHY_CAP_10000FDX))
+		return EFX_LINK_10000FDX;
+	if (phy_caps & (1u << EFX_PHY_CAP_1000FDX))
+		return EFX_LINK_1000FDX;
+	return EFX_LINK_UNKNOWN;
+}
+
+#endif
+
 int
 sfc_port_start(struct sfc_adapter *sa)
 {
@@ -143,6 +165,21 @@ sfc_port_start(struct sfc_adapter *sa)
 	if (rc != 0)
 		goto fail_port_init;
 
+#if EFSYS_OPT_LOOPBACK
+	if (sa->eth_dev->data->dev_conf.lpbk_mode != 0) {
+		efx_link_mode_t link_mode;
+
+		link_mode =
+			sfc_port_phy_caps_to_max_link_speed(port->phy_adv_cap);
+		sfc_log_init(sa, "set loopback link_mode=%u type=%u", link_mode,
+			     sa->eth_dev->data->dev_conf.lpbk_mode);
+		rc = efx_port_loopback_set(sa->nic, link_mode,
+			sa->eth_dev->data->dev_conf.lpbk_mode);
+		if (rc != 0)
+			goto fail_loopback_set;
+	}
+#endif
+
 	sfc_log_init(sa, "set flow control to %#x autoneg=%u",
 		     port->flow_ctrl, port->flow_ctrl_autoneg);
 	rc = efx_mac_fcntl_set(sa->nic, port->flow_ctrl,
@@ -268,6 +305,9 @@ sfc_port_start(struct sfc_adapter *sa)
 fail_mac_pdu_set:
 fail_phy_adv_cap_set:
 fail_mac_fcntl_set:
+#if EFSYS_OPT_LOOPBACK
+fail_loopback_set:
+#endif
 	efx_port_fini(sa->nic);
 
 fail_port_init:
-- 
2.7.4