[dpdk-dev] [PATCH v3 01/10] net: move BPF related definitions into librte_net

[Konstantin Ananyev <konstantin.ananyev@intel.com>]

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
 drivers/net/tap/tap_bpf.h  |  80 +---------
 lib/librte_net/Makefile    |   1 +
 lib/librte_net/bpf_def.h   | 370 +++++++++++++++++++++++++++++++++++++++++++++
 lib/librte_net/meson.build |   3 +-
 4 files changed, 374 insertions(+), 80 deletions(-)
 create mode 100644 lib/librte_net/bpf_def.h

diff --git a/drivers/net/tap/tap_bpf.h b/drivers/net/tap/tap_bpf.h
index 1a70ffe21..baaf3b25c 100644
--- a/drivers/net/tap/tap_bpf.h
+++ b/drivers/net/tap/tap_bpf.h
@@ -6,85 +6,7 @@
 #define __TAP_BPF_H__
 
 #include <tap_autoconf.h>
-
-/* Do not #include <linux/bpf.h> since eBPF must compile on different
- * distros which may include partial definitions for eBPF (while the
- * kernel itself may support eBPF). Instead define here all that is needed
- */
-
-/* BPF_MAP_UPDATE_ELEM command flags */
-#define	BPF_ANY	0 /* create a new element or update an existing */
-
-/* BPF architecture instruction struct */
-struct bpf_insn {
-	__u8	code;
-	__u8	dst_reg:4;
-	__u8	src_reg:4;
-	__s16	off;
-	__s32	imm; /* immediate value */
-};
-
-/* BPF program types */
-enum bpf_prog_type {
-	BPF_PROG_TYPE_UNSPEC,
-	BPF_PROG_TYPE_SOCKET_FILTER,
-	BPF_PROG_TYPE_KPROBE,
-	BPF_PROG_TYPE_SCHED_CLS,
-	BPF_PROG_TYPE_SCHED_ACT,
-};
-
-/* BPF commands types */
-enum bpf_cmd {
-	BPF_MAP_CREATE,
-	BPF_MAP_LOOKUP_ELEM,
-	BPF_MAP_UPDATE_ELEM,
-	BPF_MAP_DELETE_ELEM,
-	BPF_MAP_GET_NEXT_KEY,
-	BPF_PROG_LOAD,
-};
-
-/* BPF maps types */
-enum bpf_map_type {
-	BPF_MAP_TYPE_UNSPEC,
-	BPF_MAP_TYPE_HASH,
-};
-
-/* union of anonymous structs used with TAP BPF commands */
-union bpf_attr {
-	/* BPF_MAP_CREATE command */
-	struct {
-		__u32	map_type;
-		__u32	key_size;
-		__u32	value_size;
-		__u32	max_entries;
-		__u32	map_flags;
-		__u32	inner_map_fd;
-	};
-
-	/* BPF_MAP_UPDATE_ELEM, BPF_MAP_DELETE_ELEM commands */
-	struct {
-		__u32		map_fd;
-		__aligned_u64	key;
-		union {
-			__aligned_u64 value;
-			__aligned_u64 next_key;
-		};
-		__u64		flags;
-	};
-
-	/* BPF_PROG_LOAD command */
-	struct {
-		__u32		prog_type;
-		__u32		insn_cnt;
-		__aligned_u64	insns;
-		__aligned_u64	license;
-		__u32		log_level;
-		__u32		log_size;
-		__aligned_u64	log_buf;
-		__u32		kern_version;
-		__u32		prog_flags;
-	};
-} __attribute__((aligned(8)));
+#include <bpf_def.h>
 
 #ifndef __NR_bpf
 # if defined(__i386__)
diff --git a/lib/librte_net/Makefile b/lib/librte_net/Makefile
index 95ff54900..52bb418b8 100644
--- a/lib/librte_net/Makefile
+++ b/lib/librte_net/Makefile
@@ -20,5 +20,6 @@ SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include := rte_ip.h rte_tcp.h rte_udp.h rte_esp
 SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_sctp.h rte_icmp.h rte_arp.h
 SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_ether.h rte_gre.h rte_net.h
 SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_net_crc.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += bpf_def.h
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_net/bpf_def.h b/lib/librte_net/bpf_def.h
new file mode 100644
index 000000000..3f4a5a3e7
--- /dev/null
+++ b/lib/librte_net/bpf_def.h
@@ -0,0 +1,370 @@
+/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+ * Copyright 2017 Mellanox Technologies, Ltd.
+ */
+
+#ifndef _RTE_BPF_DEF_H_
+#define _RTE_BPF_DEF_H_
+
+#ifdef __linux__
+#include <linux/types.h>
+#else
+
+typedef uint8_t __u8;
+typedef uint16_t __u16;
+typedef uint32_t __u32;
+typedef uint64_t __u64;
+
+typedef int8_t __s8;
+typedef int16_t __s16;
+typedef int32_t __s32;
+
+#define __aligned_u64 __u64 __attribute__((aligned(8)))
+
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Do not #include <linux/bpf.h> since eBPF must compile on different
+ * distros which may include partial definitions for eBPF (while the
+ * kernel itself may support eBPF). Instead define here all that is needed
+ * by various DPDK components.
+ */
+
+/* Instruction classes */
+#define BPF_CLASS(code) ((code) & 0x07)
+#define		BPF_LD		0x00
+#define		BPF_LDX		0x01
+#define		BPF_ST		0x02
+#define		BPF_STX		0x03
+#define		BPF_ALU		0x04
+#define		BPF_JMP		0x05
+#define		BPF_RET		0x06
+#define		BPF_MISC        0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code)  ((code) & 0x18)
+#define		BPF_W		0x00
+#define		BPF_H		0x08
+#define		BPF_B		0x10
+#define BPF_MODE(code)  ((code) & 0xe0)
+#define		BPF_IMM		0x00
+#define		BPF_ABS		0x20
+#define		BPF_IND		0x40
+#define		BPF_MEM		0x60
+#define		BPF_LEN		0x80
+#define		BPF_MSH		0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code)    ((code) & 0xf0)
+#define		BPF_ADD		0x00
+#define		BPF_SUB		0x10
+#define		BPF_MUL		0x20
+#define		BPF_DIV		0x30
+#define		BPF_OR		0x40
+#define		BPF_AND		0x50
+#define		BPF_LSH		0x60
+#define		BPF_RSH		0x70
+#define		BPF_NEG		0x80
+#define		BPF_MOD		0x90
+#define		BPF_XOR		0xa0
+
+#define		BPF_JA		0x00
+#define		BPF_JEQ		0x10
+#define		BPF_JGT		0x20
+#define		BPF_JGE		0x30
+#define		BPF_JSET        0x40
+#define BPF_SRC(code)   ((code) & 0x08)
+#define		BPF_K		0x00
+#define		BPF_X		0x08
+
+#ifndef BPF_MAXINSNS
+#define BPF_MAXINSNS 4096
+#endif
+
+/* Extended instruction set based on top of classic BPF */
+
+/* instruction classes */
+#define BPF_ALU64	0x07	/* alu mode in double word width */
+
+/* ld/ldx fields */
+#define BPF_DW		0x18	/* double word */
+#define BPF_XADD	0xc0	/* exclusive add */
+
+/* alu/jmp fields */
+#define BPF_MOV		0xb0	/* mov reg to reg */
+#define BPF_ARSH	0xc0	/* sign extending arithmetic shift right */
+
+/* change endianness of a register */
+#define BPF_END		0xd0	/* flags for endianness conversion: */
+#define BPF_TO_LE	0x00	/* convert to little-endian */
+#define BPF_TO_BE	0x08	/* convert to big-endian */
+#define BPF_FROM_LE	BPF_TO_LE
+#define BPF_FROM_BE	BPF_TO_BE
+
+/* jmp encodings */
+#define BPF_JNE		0x50	/* jump != */
+#define BPF_JLT		0xa0	/* LT is unsigned, '<' */
+#define BPF_JLE		0xb0	/* LE is unsigned, '<=' */
+#define BPF_JSGT	0x60	/* SGT is signed '>', GT in x86 */
+#define BPF_JSGE	0x70	/* SGE is signed '>=', GE in x86 */
+#define BPF_JSLT	0xc0	/* SLT is signed, '<' */
+#define BPF_JSLE	0xd0	/* SLE is signed, '<=' */
+#define BPF_CALL	0x80	/* function call */
+#define BPF_EXIT	0x90	/* function return */
+
+/* Register numbers */
+enum {
+	BPF_REG_0 = 0,
+	BPF_REG_1,
+	BPF_REG_2,
+	BPF_REG_3,
+	BPF_REG_4,
+	BPF_REG_5,
+	BPF_REG_6,
+	BPF_REG_7,
+	BPF_REG_8,
+	BPF_REG_9,
+	BPF_REG_10,
+	__MAX_BPF_REG,
+};
+
+/* BPF has 10 general purpose 64-bit registers and stack frame. */
+#define MAX_BPF_REG	__MAX_BPF_REG
+
+struct bpf_insn {
+	__u8	code;		/* opcode */
+	__u8	dst_reg:4;	/* dest register */
+	__u8	src_reg:4;	/* source register */
+	__s16	off;		/* signed offset */
+	__s32	imm;		/* signed immediate constant */
+};
+
+/* BPF syscall commands, see bpf(2) man-page for details. */
+enum bpf_cmd {
+	BPF_MAP_CREATE,
+	BPF_MAP_LOOKUP_ELEM,
+	BPF_MAP_UPDATE_ELEM,
+	BPF_MAP_DELETE_ELEM,
+	BPF_MAP_GET_NEXT_KEY,
+	BPF_PROG_LOAD,
+	BPF_OBJ_PIN,
+	BPF_OBJ_GET,
+	BPF_PROG_ATTACH,
+	BPF_PROG_DETACH,
+	BPF_PROG_TEST_RUN,
+	BPF_PROG_GET_NEXT_ID,
+	BPF_MAP_GET_NEXT_ID,
+	BPF_PROG_GET_FD_BY_ID,
+	BPF_MAP_GET_FD_BY_ID,
+	BPF_OBJ_GET_INFO_BY_FD,
+};
+
+enum bpf_map_type {
+	BPF_MAP_TYPE_UNSPEC,
+	BPF_MAP_TYPE_HASH,
+	BPF_MAP_TYPE_ARRAY,
+	BPF_MAP_TYPE_PROG_ARRAY,
+	BPF_MAP_TYPE_PERF_EVENT_ARRAY,
+	BPF_MAP_TYPE_PERCPU_HASH,
+	BPF_MAP_TYPE_PERCPU_ARRAY,
+	BPF_MAP_TYPE_STACK_TRACE,
+	BPF_MAP_TYPE_CGROUP_ARRAY,
+	BPF_MAP_TYPE_LRU_HASH,
+	BPF_MAP_TYPE_LRU_PERCPU_HASH,
+	BPF_MAP_TYPE_LPM_TRIE,
+	BPF_MAP_TYPE_ARRAY_OF_MAPS,
+	BPF_MAP_TYPE_HASH_OF_MAPS,
+	BPF_MAP_TYPE_DEVMAP,
+	BPF_MAP_TYPE_SOCKMAP,
+};
+
+enum bpf_prog_type {
+	BPF_PROG_TYPE_UNSPEC,
+	BPF_PROG_TYPE_SOCKET_FILTER,
+	BPF_PROG_TYPE_KPROBE,
+	BPF_PROG_TYPE_SCHED_CLS,
+	BPF_PROG_TYPE_SCHED_ACT,
+	BPF_PROG_TYPE_TRACEPOINT,
+	BPF_PROG_TYPE_XDP,
+	BPF_PROG_TYPE_PERF_EVENT,
+	BPF_PROG_TYPE_CGROUP_SKB,
+	BPF_PROG_TYPE_CGROUP_SOCK,
+	BPF_PROG_TYPE_LWT_IN,
+	BPF_PROG_TYPE_LWT_OUT,
+	BPF_PROG_TYPE_LWT_XMIT,
+	BPF_PROG_TYPE_SOCK_OPS,
+	BPF_PROG_TYPE_SK_SKB,
+};
+
+enum bpf_attach_type {
+	BPF_CGROUP_INET_INGRESS,
+	BPF_CGROUP_INET_EGRESS,
+	BPF_CGROUP_INET_SOCK_CREATE,
+	BPF_CGROUP_SOCK_OPS,
+	BPF_SK_SKB_STREAM_PARSER,
+	BPF_SK_SKB_STREAM_VERDICT,
+	__MAX_BPF_ATTACH_TYPE
+};
+
+#define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
+
+/* If BPF_F_ALLOW_OVERRIDE flag is used in BPF_PROG_ATTACH command
+ * to the given target_fd cgroup the descendent cgroup will be able to
+ * override effective bpf program that was inherited from this cgroup
+ */
+#define BPF_F_ALLOW_OVERRIDE	(1U << 0)
+
+/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the
+ * verifier will perform strict alignment checking as if the kernel
+ * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set,
+ * and NET_IP_ALIGN defined to 2.
+ */
+#define BPF_F_STRICT_ALIGNMENT	(1U << 0)
+
+#define BPF_PSEUDO_MAP_FD	1
+
+/* flags for BPF_MAP_UPDATE_ELEM command */
+#define BPF_ANY		0 /* create new element or update existing */
+#define BPF_NOEXIST	1 /* create new element if it didn't exist */
+#define BPF_EXIST	2 /* update existing element */
+
+/* flags for BPF_MAP_CREATE command */
+#define BPF_F_NO_PREALLOC	(1U << 0)
+/* Instead of having one common LRU list in the
+ * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list
+ * which can scale and perform better.
+ * Note, the LRU nodes (including free nodes) cannot be moved
+ * across different LRU lists.
+ */
+#define BPF_F_NO_COMMON_LRU	(1U << 1)
+/* Specify numa node during map creation */
+#define BPF_F_NUMA_NODE		(1U << 2)
+
+union bpf_attr {
+	struct { /* anonymous struct used by BPF_MAP_CREATE command */
+		__u32	map_type;	/* one of enum bpf_map_type */
+		__u32	key_size;	/* size of key in bytes */
+		__u32	value_size;	/* size of value in bytes */
+		__u32	max_entries;	/* max number of entries in a map */
+		__u32	map_flags;	/* BPF_MAP_CREATE related
+					 * flags defined above.
+					 */
+		__u32	inner_map_fd;	/* fd pointing to the inner map */
+		__u32	numa_node;	/* numa node (effective only if
+					 * BPF_F_NUMA_NODE is set).
+					 */
+	};
+
+	struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
+		__u32		map_fd;
+		__aligned_u64	key;
+		union {
+			__aligned_u64 value;
+			__aligned_u64 next_key;
+		};
+		__u64		flags;
+	};
+
+	struct { /* anonymous struct used by BPF_PROG_LOAD command */
+		__u32		prog_type;	/* one of enum bpf_prog_type */
+		__u32		insn_cnt;
+		__aligned_u64	insns;
+		__aligned_u64	license;
+		__u32		log_level;
+		/* verbosity level of verifier */
+		__u32		log_size;	/* size of user buffer */
+		__aligned_u64	log_buf;	/* user supplied buffer */
+		__u32		kern_version;
+		/* checked when prog_type=kprobe */
+		__u32		prog_flags;
+	};
+
+	struct { /* anonymous struct used by BPF_OBJ_* commands */
+		__aligned_u64	pathname;
+		__u32		bpf_fd;
+	};
+
+	struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */
+		__u32		target_fd;
+		/* container object to attach to */
+		__u32		attach_bpf_fd;	/* eBPF program to attach */
+		__u32		attach_type;
+		__u32		attach_flags;
+	};
+
+	struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */
+		__u32		prog_fd;
+		__u32		retval;
+		__u32		data_size_in;
+		__u32		data_size_out;
+		__aligned_u64	data_in;
+		__aligned_u64	data_out;
+		__u32		repeat;
+		__u32		duration;
+	} test;
+
+	struct { /* anonymous struct used by BPF_*_GET_*_ID */
+		union {
+			__u32		start_id;
+			__u32		prog_id;
+			__u32		map_id;
+		};
+		__u32		next_id;
+	};
+
+	struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */
+		__u32		bpf_fd;
+		__u32		info_len;
+		__aligned_u64	info;
+	} info;
+} __attribute__((aligned(8)));
+
+/* Generic BPF return codes which all BPF program types may support.
+ * The values are binary compatible with their TC_ACT_* counter-part to
+ * provide backwards compatibility with existing SCHED_CLS and SCHED_ACT
+ * programs.
+ *
+ * XDP is handled seprately, see XDP_*.
+ */
+enum bpf_ret_code {
+	BPF_OK = 0,
+	/* 1 reserved */
+	BPF_DROP = 2,
+	/* 3-6 reserved */
+	BPF_REDIRECT = 7,
+	/* >127 are reserved for prog type specific return codes */
+};
+
+enum sk_action {
+	SK_DROP = 0,
+	SK_PASS,
+};
+
+#define BPF_TAG_SIZE	8
+
+struct bpf_prog_info {
+	__u32 type;
+	__u32 id;
+	__u8  tag[BPF_TAG_SIZE];
+	__u32 jited_prog_len;
+	__u32 xlated_prog_len;
+	__aligned_u64 jited_prog_insns;
+	__aligned_u64 xlated_prog_insns;
+} __attribute__((aligned(8)));
+
+struct bpf_map_info {
+	__u32 type;
+	__u32 id;
+	__u32 key_size;
+	__u32 value_size;
+	__u32 max_entries;
+	__u32 map_flags;
+} __attribute__((aligned(8)));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_BPF_DEF_H_ */
diff --git a/lib/librte_net/meson.build b/lib/librte_net/meson.build
index 78c0f03e5..3acc1602a 100644
--- a/lib/librte_net/meson.build
+++ b/lib/librte_net/meson.build
@@ -12,7 +12,8 @@ headers = files('rte_ip.h',
 	'rte_ether.h',
 	'rte_gre.h',
 	'rte_net.h',
-	'rte_net_crc.h')
+	'rte_net_crc.h',
+	'bpf_def.h')
 
 sources = files('rte_arp.c', 'rte_net.c', 'rte_net_crc.c')
 deps += ['mbuf']
-- 
2.13.6