From: Junjie Chen <junjie.j.chen@intel.com>
To: jianfeng.tan@intel.com, maxime.coquelin@redhat.com, mtetsuyah@gmail.com
Cc: dev@dpdk.org, Junjie Chen <junjie.j.chen@intel.com>
Subject: [dpdk-dev] [PATCH] net/vhost: fix vhost invalid state
Date: Tue, 10 Apr 2018 10:18:09 -0400 [thread overview]
Message-ID: <1523369889-73457-1-git-send-email-junjie.j.chen@intel.com> (raw)
dev_start sets *dev_attached* after setup queues, this sets device to
invalid state since no frontend is attached. Also destroy_device set
*started* to zero which makes *allow_queuing* always zero until dev_start
get called again. Actually, we should not determine queues existence by
*dev_attached* but by queues pointers or other separated variable(s).
Fixes: 30a701a53737 ("net/vhost: fix crash when creating vdev
dynamically")
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
---
drivers/net/vhost/rte_eth_vhost.c | 64 +++++++++++++++++++++++----------------
1 file changed, 38 insertions(+), 26 deletions(-)
diff --git a/drivers/net/vhost/rte_eth_vhost.c b/drivers/net/vhost/rte_eth_vhost.c
index 11b6076..6a2ff76 100644
--- a/drivers/net/vhost/rte_eth_vhost.c
+++ b/drivers/net/vhost/rte_eth_vhost.c
@@ -118,6 +118,7 @@ struct pmd_internal {
char *iface_name;
uint16_t max_queues;
uint16_t vid;
+ uint16_t queue_ready;
rte_atomic32_t started;
};
@@ -528,10 +529,13 @@ update_queuing_status(struct rte_eth_dev *dev)
unsigned int i;
int allow_queuing = 1;
- if (rte_atomic32_read(&internal->dev_attached) == 0)
+ if (!dev->data->rx_queues || !dev->data->tx_queues) {
+ RTE_LOG(ERR, PMD, "RX/TX queues not setup yet\n");
return;
+ }
- if (rte_atomic32_read(&internal->started) == 0)
+ if (rte_atomic32_read(&internal->started) == 0 ||
+ rte_atomic32_read(&internal->dev_attached) == 0)
allow_queuing = 0;
/* Wait until rx/tx_pkt_burst stops accessing vhost device */
@@ -576,6 +580,8 @@ queue_setup(struct rte_eth_dev *eth_dev, struct pmd_internal *internal)
vq->internal = internal;
vq->port = eth_dev->data->port_id;
}
+
+ internal->queue_ready = 1;
}
static int
@@ -607,13 +613,10 @@ new_device(int vid)
#endif
internal->vid = vid;
- if (eth_dev->data->rx_queues && eth_dev->data->tx_queues) {
+ if (eth_dev->data->rx_queues && eth_dev->data->tx_queues)
queue_setup(eth_dev, internal);
- rte_atomic32_set(&internal->dev_attached, 1);
- } else {
- RTE_LOG(INFO, PMD, "RX/TX queues have not setup yet\n");
- rte_atomic32_set(&internal->dev_attached, 0);
- }
+ else
+ RTE_LOG(INFO, PMD, "RX/TX queues not setup yet\n");
for (i = 0; i < rte_vhost_get_vring_num(vid); i++)
rte_vhost_enable_guest_notification(vid, i, 0);
@@ -622,6 +625,7 @@ new_device(int vid)
eth_dev->data->dev_link.link_status = ETH_LINK_UP;
+ rte_atomic32_set(&internal->dev_attached, 1);
update_queuing_status(eth_dev);
RTE_LOG(INFO, PMD, "Vhost device %d created\n", vid);
@@ -657,17 +661,19 @@ destroy_device(int vid)
eth_dev->data->dev_link.link_status = ETH_LINK_DOWN;
- for (i = 0; i < eth_dev->data->nb_rx_queues; i++) {
- vq = eth_dev->data->rx_queues[i];
- if (vq == NULL)
- continue;
- vq->vid = -1;
- }
- for (i = 0; i < eth_dev->data->nb_tx_queues; i++) {
- vq = eth_dev->data->tx_queues[i];
- if (vq == NULL)
- continue;
- vq->vid = -1;
+ if (eth_dev->data->rx_queues && eth_dev->data->tx_queues) {
+ for (i = 0; i < eth_dev->data->nb_rx_queues; i++) {
+ vq = eth_dev->data->rx_queues[i];
+ if (!vq)
+ continue;
+ vq->vid = -1;
+ }
+ for (i = 0; i < eth_dev->data->nb_tx_queues; i++) {
+ vq = eth_dev->data->tx_queues[i];
+ if (!vq)
+ continue;
+ vq->vid = -1;
+ }
}
state = vring_states[eth_dev->data->port_id];
@@ -792,11 +798,14 @@ eth_dev_start(struct rte_eth_dev *eth_dev)
{
struct pmd_internal *internal = eth_dev->data->dev_private;
- if (unlikely(rte_atomic32_read(&internal->dev_attached) == 0)) {
- queue_setup(eth_dev, internal);
- rte_atomic32_set(&internal->dev_attached, 1);
+ if (!eth_dev->data->rx_queues || !eth_dev->data->tx_queues) {
+ RTE_LOG(ERR, PMD, "RX/TX queues not exist yet\n");
+ return -1;
}
+ if (!internal->queue_ready)
+ queue_setup(eth_dev, internal);
+
rte_atomic32_set(&internal->started, 1);
update_queuing_status(eth_dev);
@@ -836,10 +845,13 @@ eth_dev_close(struct rte_eth_dev *dev)
pthread_mutex_unlock(&internal_list_lock);
rte_free(list);
- for (i = 0; i < dev->data->nb_rx_queues; i++)
- rte_free(dev->data->rx_queues[i]);
- for (i = 0; i < dev->data->nb_tx_queues; i++)
- rte_free(dev->data->tx_queues[i]);
+ if (dev->data->rx_queues)
+ for (i = 0; i < dev->data->nb_rx_queues; i++)
+ rte_free(dev->data->rx_queues[i]);
+
+ if (dev->data->tx_queues)
+ for (i = 0; i < dev->data->nb_tx_queues; i++)
+ rte_free(dev->data->tx_queues[i]);
rte_free(dev->data->mac_addrs);
free(internal->dev_name);
--
2.0.1
next reply other threads:[~2018-04-10 6:39 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-10 14:18 Junjie Chen [this message]
2018-04-10 9:39 ` Tan, Jianfeng
2018-04-10 11:13 ` Jens Freimann
2018-04-11 2:54 ` Chen, Junjie J
2018-04-11 10:53 ` [dpdk-dev] [PATCH v2] " Junjie Chen
2018-04-11 8:11 ` Tan, Jianfeng
2018-04-11 8:35 ` Chen, Junjie J
2018-04-11 9:00 ` Tan, Jianfeng
2018-04-11 9:17 ` Chen, Junjie J
2018-04-11 9:08 ` Jens Freimann
2018-04-11 17:02 ` [dpdk-dev] [PATCH v3] " Junjie Chen
2018-04-12 7:21 ` Tan, Jianfeng
2018-04-12 7:29 ` Maxime Coquelin
2018-04-12 7:34 ` Chen, Junjie J
2018-04-12 7:35 ` Maxime Coquelin
2018-04-12 7:40 ` Maxime Coquelin
2018-04-12 7:36 ` Tan, Jianfeng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1523369889-73457-1-git-send-email-junjie.j.chen@intel.com \
--to=junjie.j.chen@intel.com \
--cc=dev@dpdk.org \
--cc=jianfeng.tan@intel.com \
--cc=maxime.coquelin@redhat.com \
--cc=mtetsuyah@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).