From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, shreyansh.jain@nxp.com
Subject: [dpdk-dev] [PATCH 1/5] bus/dpaa: support device blacklisting
Date: Wed, 25 Apr 2018 18:26:58 +0530 [thread overview]
Message-ID: <1524661022-21484-1-git-send-email-hemant.agrawal@nxp.com> (raw)
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
doc/guides/cryptodevs/dpaa_sec.rst | 13 +++++
doc/guides/nics/dpaa.rst | 10 ++++
drivers/bus/dpaa/dpaa_bus.c | 101 ++++++++++++++++++++++++++++++-------
drivers/bus/dpaa/rte_dpaa_bus.h | 2 -
4 files changed, 106 insertions(+), 20 deletions(-)
diff --git a/doc/guides/cryptodevs/dpaa_sec.rst b/doc/guides/cryptodevs/dpaa_sec.rst
index 2964e83..9988ee1 100644
--- a/doc/guides/cryptodevs/dpaa_sec.rst
+++ b/doc/guides/cryptodevs/dpaa_sec.rst
@@ -78,6 +78,19 @@ Supported DPAA SoCs
* LS1046A/LS1026A
* LS1043A/LS1023A
+Whitelisting & Blacklisting
+---------------------------
+
+For blacklisting a DPAA device, following commands can be used.
+
+ .. code-block:: console
+
+ <dpdk app> <EAL args> -b "dpaa_bus:dpaa-secX" -- ...
+ e.g. "dpaa_bus:dpaa-sec0"
+
+ or to disable all 4 SEC devices
+ -b "dpaa_sec:dpaa-sec0" -b "dpaa_sec:dpaa-sec1" -b "dpaa_sec:dpaa-sec2" -b "dpaa_sec:dpaa-sec3"
+
Limitations
-----------
diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst
index 0a13996..620c045 100644
--- a/doc/guides/nics/dpaa.rst
+++ b/doc/guides/nics/dpaa.rst
@@ -162,6 +162,16 @@ Manager.
this pool.
+Whitelisting & Blacklisting
+---------------------------
+
+For blacklisting a DPAA device, following commands can be used.
+
+ .. code-block:: console
+
+ <dpdk app> <EAL args> -b "dpaa_bus:fmX-macY" -- ...
+ e.g. "dpaa_bus:fm1-mac4"
+
Supported DPAA SoCs
-------------------
diff --git a/drivers/bus/dpaa/dpaa_bus.c b/drivers/bus/dpaa/dpaa_bus.c
index ffc90a7..2b85c9e 100644
--- a/drivers/bus/dpaa/dpaa_bus.c
+++ b/drivers/bus/dpaa/dpaa_bus.c
@@ -54,6 +54,8 @@ pthread_key_t dpaa_portal_key;
unsigned int dpaa_svr_family;
+#define FSL_DPAA_BUS_NAME dpaa_bus
+
RTE_DEFINE_PER_LCORE(bool, dpaa_io);
RTE_DEFINE_PER_LCORE(struct dpaa_portal_dqrr, held_bufs);
@@ -129,6 +131,22 @@ dpaa_sec_available(void)
static void dpaa_clean_device_list(void);
+static struct rte_devargs *
+dpaa_devargs_lookup(struct rte_dpaa_device *dev)
+{
+ struct rte_devargs *devargs;
+ char dev_name[32];
+
+ RTE_EAL_DEVARGS_FOREACH("dpaa_bus", devargs) {
+ devargs->bus->parse(devargs->name, &dev_name);
+ if (strcmp(dev_name, dev->device.name) == 0) {
+ DPAA_BUS_INFO("**Devargs matched %s", dev_name);
+ return devargs;
+ }
+ }
+ return NULL;
+}
+
static int
dpaa_create_device_list(void)
{
@@ -162,6 +180,7 @@ dpaa_create_device_list(void)
fman_intf->mac_idx);
DPAA_BUS_LOG(DEBUG, "Device added: %s", dev->name);
dev->device.name = dev->name;
+ dev->device.devargs = dpaa_devargs_lookup(dev);
dpaa_add_to_device_list(dev);
}
@@ -198,6 +217,8 @@ dpaa_create_device_list(void)
memset(dev->name, 0, RTE_ETH_NAME_MAX_LEN);
sprintf(dev->name, "dpaa-sec%d", i);
DPAA_BUS_LOG(DEBUG, "Device added: %s", dev->name);
+ dev->device.name = dev->name;
+ dev->device.devargs = dpaa_devargs_lookup(dev);
dpaa_add_to_device_list(dev);
}
@@ -357,6 +378,51 @@ dpaa_portal_finish(void *arg)
RTE_PER_LCORE(dpaa_io) = false;
}
+static int
+rte_dpaa_bus_parse(const char *name, void *out_name)
+{
+ int i, j;
+ int max_fman = 2, max_macs = 16;
+ char *sep = strchr(name, ':');
+
+ if (strncmp(name, RTE_STR(FSL_DPAA_BUS_NAME),
+ strlen(RTE_STR(FSL_DPAA_BUS_NAME)))) {
+ return -EINVAL;
+ }
+
+ if (!sep) {
+ DPAA_BUS_ERR("Incorrect device name observed");
+ return -EINVAL;
+ }
+
+ sep = (char *) (sep + 1);
+
+ for (i = 0; i < max_fman; i++) {
+ for (j = 0; j < max_macs; j++) {
+ char fm_name[16];
+ snprintf(fm_name, 16, "fm%d-mac%d", i, j);
+ if (strcmp(fm_name, sep) == 0) {
+ if (out_name)
+ strcpy(out_name, sep);
+ return 0;
+ }
+ }
+ }
+
+ for (i = 0; i < RTE_LIBRTE_DPAA_MAX_CRYPTODEV; i++) {
+ char sec_name[16];
+
+ snprintf(sec_name, 16, "dpaa-sec%d", i);
+ if (strcmp(sec_name, sep) == 0) {
+ if (out_name)
+ strcpy(out_name, sep);
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
#define DPAA_DEV_PATH1 "/sys/devices/platform/soc/soc:fsl,dpaa"
#define DPAA_DEV_PATH2 "/sys/devices/platform/fsl,dpaa"
@@ -458,22 +524,15 @@ static int
rte_dpaa_device_match(struct rte_dpaa_driver *drv,
struct rte_dpaa_device *dev)
{
- int ret = -1;
-
- BUS_INIT_FUNC_TRACE();
-
if (!drv || !dev) {
DPAA_BUS_DEBUG("Invalid drv or dev received.");
- return ret;
+ return -1;
}
- if (drv->drv_type == dev->device_type) {
- DPAA_BUS_INFO("Device: %s matches for driver: %s",
- dev->name, drv->driver.name);
- ret = 0; /* Found a match */
- }
+ if (drv->drv_type == dev->device_type)
+ return 0;
- return ret;
+ return -1;
}
static int
@@ -484,8 +543,7 @@ rte_dpaa_bus_probe(void)
struct rte_dpaa_driver *drv;
FILE *svr_file = NULL;
unsigned int svr_ver;
-
- BUS_INIT_FUNC_TRACE();
+ int probe_all = rte_dpaa_bus.bus.conf.scan_mode != RTE_BUS_SCAN_WHITELIST;
/* For each registered driver, and device, call the driver->probe */
TAILQ_FOREACH(dev, &rte_dpaa_bus.device_list, next) {
@@ -494,13 +552,19 @@ rte_dpaa_bus_probe(void)
if (ret)
continue;
- if (!drv->probe)
+ if (!drv->probe ||
+ (dev->device.devargs &&
+ dev->device.devargs->policy == RTE_DEV_BLACKLISTED))
continue;
- ret = drv->probe(drv, dev);
- if (ret)
- DPAA_BUS_ERR("Unable to probe.\n");
-
+ if (probe_all ||
+ (dev->device.devargs &&
+ dev->device.devargs->policy ==
+ RTE_DEV_WHITELISTED)) {
+ ret = drv->probe(drv, dev);
+ if (ret)
+ DPAA_BUS_ERR("Unable to probe.\n");
+ }
break;
}
}
@@ -557,6 +621,7 @@ struct rte_dpaa_bus rte_dpaa_bus = {
.bus = {
.scan = rte_dpaa_bus_scan,
.probe = rte_dpaa_bus_probe,
+ .parse = rte_dpaa_bus_parse,
.find_device = rte_dpaa_find_device,
.get_iommu_class = rte_dpaa_get_iommu_class,
},
diff --git a/drivers/bus/dpaa/rte_dpaa_bus.h b/drivers/bus/dpaa/rte_dpaa_bus.h
index 89aeac2..8f7e18c 100644
--- a/drivers/bus/dpaa/rte_dpaa_bus.h
+++ b/drivers/bus/dpaa/rte_dpaa_bus.h
@@ -15,8 +15,6 @@
#include <of.h>
#include <netcfg.h>
-#define FSL_DPAA_BUS_NAME "FSL_DPAA_BUS"
-
#define DPAA_MEMPOOL_OPS_NAME "dpaa"
#define DEV_TO_DPAA_DEVICE(ptr) \
--
2.7.4
next reply other threads:[~2018-04-25 12:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-25 12:56 Hemant Agrawal [this message]
2018-04-25 12:56 ` [dpdk-dev] [PATCH 2/5] bus/fslmc: " Hemant Agrawal
2018-04-25 12:57 ` [dpdk-dev] [PATCH 3/5] bus/fslmc: minor improvements in debug logging Hemant Agrawal
2018-04-25 12:57 ` [dpdk-dev] [PATCH 4/5] net/dpaa: fix the xstats implementation Hemant Agrawal
2018-04-25 12:57 ` [dpdk-dev] [PATCH 5/5] bus/dpaa: improve the dynamic logging Hemant Agrawal
2018-05-09 5:41 ` [dpdk-dev] [PATCH 1/5] bus/dpaa: support device blacklisting Shreyansh Jain
2018-05-13 22:38 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1524661022-21484-1-git-send-email-hemant.agrawal@nxp.com \
--to=hemant.agrawal@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=shreyansh.jain@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).