[dpdk-dev] [PATCH v6] ethdev: check Rx/Tx offloads

[Wei Dai <wei.dai@intel.com>]

This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure( ) and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
>From application, a pure per-port offloading can only be enabled in
rte_eth_dev_configure().
Only supported per queue offloading can be sent to
rte_eth_[rt]x_queue_setup( ). A per queue offloading is
enabled only if it is enabled in rte_eth_dev_configure( ) OR
if it is enabled in rte_eth_[rt]x_queue_setup( ).
If a per queue offloading is enabled in rte_eth_dev_configure(),
it can't be disabled in rte_eth_[rt]x_queue_setup( ).
If a per queue offloading is disabled in rte_eth_dev_configure( ),
it can be enabled or disabled( ) in rte_eth_[rt]x_queue_setup( ).

This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.

Signed-off-by: Wei Dai <wei.dai@intel.com>

---
v6:
No need enable an offload in queue_setup( ) if it has already
been enabled in dev_configure( )

v5:
keep offload settings sent to PMD same as those from application

v4:
fix a wrong description in git log message.

v3:
rework according to dicision of offloading API in community

v2:
add offloads checking in rte_eth_dev_configure( ).
check if a requested offloading is supported.
---
 lib/librte_ether/rte_ethdev.c | 70 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index f0f53d4..39a0f0e 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1196,6 +1196,28 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
 							ETHER_MAX_LEN;
 	}
 
+	/* Any requested offload must be within its device capability */
+	if ((local_conf.rxmode.offloads & dev_info.rx_offload_capa) !=
+	     local_conf.rxmode.offloads) {
+		RTE_PMD_DEBUG_TRACE("ethdev port_id=%d requested Rx offloads "
+				    "0x%" PRIx64 " doesn't match Rx offloads "
+				    "capability 0x%" PRIx64 "\n",
+				    port_id,
+				    local_conf.rxmode.offloads,
+				    dev_info.rx_offload_capa);
+		return -EINVAL;
+	}
+	if ((local_conf.txmode.offloads & dev_info.tx_offload_capa) !=
+	     local_conf.txmode.offloads) {
+		RTE_PMD_DEBUG_TRACE("ethdev port_id=%d requested Tx offloads "
+				    "0x%" PRIx64 " doesn't match Tx offloads "
+				    "capability 0x%" PRIx64 "\n",
+				    port_id,
+				    local_conf.txmode.offloads,
+				    dev_info.tx_offload_capa);
+		return -EINVAL;
+	}
+
 	/*
 	 * Setup new number of RX/TX queues and reconfigure device.
 	 */
@@ -1547,6 +1569,30 @@ rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
 						    &local_conf.offloads);
 	}
 
+	/*
+	 * Only per-queue offload can be enabled from application.
+	 * If any other offload is sent to this function, return -EINVAL
+	 */
+	if ((local_conf.offloads & dev_info.rx_queue_offload_capa) !=
+	     local_conf.offloads) {
+		RTE_PMD_DEBUG_TRACE("Ethdev port_id=%d rx_queue_id=%d "
+				    "Requested offload 0x%" PRIx64 "doesn't "
+				    "match per-queue capability 0x%" PRIx64
+				    " in %s\n",
+				    port_id,
+				    rx_queue_id,
+				    local_conf.offloads,
+				    dev_info.rx_queue_offload_capa,
+				    __func__);
+		return -EINVAL;
+	}
+
+	/*
+	 * If an offload has already been enabled in rte_eth_dev_configure(),
+	 * there is no need to enable it again in queue level.
+	 */
+	local_conf.offloads &= ~dev->data->dev_conf.rxmode.offloads;
+
 	ret = (*dev->dev_ops->rx_queue_setup)(dev, rx_queue_id, nb_rx_desc,
 					      socket_id, &local_conf, mp);
 	if (!ret) {
@@ -1681,6 +1727,30 @@ rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,
 					  &local_conf.offloads);
 	}
 
+	/*
+	 * Only per-queue offload can be enabled from applcation.
+	 * If any other offload is sent to this function, return -EINVAL
+	 */
+	if ((local_conf.offloads & dev_info.tx_queue_offload_capa) !=
+	     local_conf.offloads) {
+		RTE_PMD_DEBUG_TRACE("Ethdev port_id=%d tx_queue_id=%d "
+				    "Requested offload 0x%" PRIx64 "doesn't "
+				    "match per-queue capability 0x%" PRIx64
+				    " in %s\n",
+				    port_id,
+				    tx_queue_id,
+				    local_conf.offloads,
+				    dev_info.tx_queue_offload_capa,
+				    __func__);
+		return -EINVAL;
+	}
+
+	/*
+	 * If an offload has already be enabled in rte_eth_dev_configure,
+	 * there is no need to enable it in queue level again
+	 */
+	local_conf.offloads &= ~dev->data->dev_conf.txmode.offloads;
+
 	return eth_err(port_id, (*dev->dev_ops->tx_queue_setup)(dev,
 		       tx_queue_id, nb_tx_desc, socket_id, &local_conf));
 }
-- 
2.7.5