From: Tomasz Duszynski <tdu@semihalf.com>
To: dev@dpdk.org
Cc: pablo.de.lara.guarch@intel.com, dima@marvell.com,
Tomasz Duszynski <tdu@semihalf.com>,
Natalie Samsonov <nsamsono@marvell.com>
Subject: [dpdk-dev] [PATCH v3] crypto/mrvl: rename PMD to mvsam
Date: Tue, 8 May 2018 10:14:04 +0200 [thread overview]
Message-ID: <1525767244-15220-1-git-send-email-tdu@semihalf.com> (raw)
In-Reply-To: <1524763320-29946-1-git-send-email-tdu@semihalf.com>
Picking a company stock ticker for a PMD name might not be a best approach
in a long run since name is too generic.
This patch addresses that and renames mrvl to mvsam.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
---
MAINTAINERS | 6 +--
config/common_base | 4 +-
devtools/test-build.sh | 2 +-
.../cryptodevs/features/{mrvl.ini => mvsam.ini} | 2 +-
doc/guides/cryptodevs/index.rst | 2 +-
doc/guides/cryptodevs/{mrvl.rst => mvsam.rst} | 24 +++++------
doc/guides/rel_notes/release_17_11.rst | 2 +-
doc/guides/tools/cryptoperf.rst | 2 +-
drivers/crypto/Makefile | 2 +-
drivers/crypto/meson.build | 2 +-
drivers/crypto/{mrvl => mvsam}/Makefile | 8 ++--
drivers/crypto/{mrvl => mvsam}/meson.build | 0
drivers/crypto/{mrvl => mvsam}/rte_mrvl_compat.h | 0
drivers/crypto/{mrvl => mvsam}/rte_mrvl_pmd.c | 0
drivers/crypto/{mrvl => mvsam}/rte_mrvl_pmd_ops.c | 0
.../crypto/{mrvl => mvsam}/rte_mrvl_pmd_private.h | 2 +-
.../rte_pmd_mvsam_version.map} | 0
mk/rte.app.mk | 2 +-
test/test/meson.build | 2 +-
test/test/test_cryptodev.c | 33 +++++++--------
test/test/test_cryptodev.h | 2 +-
test/test/test_cryptodev_aes_test_vectors.h | 48 +++++++++++-----------
test/test/test_cryptodev_blockcipher.c | 6 +--
test/test/test_cryptodev_blockcipher.h | 2 +-
test/test/test_cryptodev_des_test_vectors.h | 16 ++++----
test/test/test_cryptodev_hash_test_vectors.h | 44 ++++++++++----------
26 files changed, 104 insertions(+), 109 deletions(-)
rename doc/guides/cryptodevs/features/{mrvl.ini => mvsam.ini} (93%)
rename doc/guides/cryptodevs/{mrvl.rst => mvsam.rst} (88%)
rename drivers/crypto/{mrvl => mvsam}/Makefile (80%)
rename drivers/crypto/{mrvl => mvsam}/meson.build (100%)
rename drivers/crypto/{mrvl => mvsam}/rte_mrvl_compat.h (100%)
rename drivers/crypto/{mrvl => mvsam}/rte_mrvl_pmd.c (100%)
rename drivers/crypto/{mrvl => mvsam}/rte_mrvl_pmd_ops.c (100%)
rename drivers/crypto/{mrvl => mvsam}/rte_mrvl_pmd_private.h (98%)
rename drivers/crypto/{mrvl/rte_pmd_mrvl_version.map => mvsam/rte_pmd_mvsam_version.map} (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 645bd52..57460d0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -735,9 +735,9 @@ M: Tomasz Duszynski <tdu@semihalf.com>
M: Dmitri Epshtein <dima@marvell.com>
M: Natalie Samsonov <nsamsono@marvell.com>
M: Jianbo Liu <jianbo.liu@arm.com>
-F: drivers/crypto/mrvl/
-F: doc/guides/cryptodevs/mrvl.rst
-F: doc/guides/cryptodevs/features/mrvl.ini
+F: drivers/crypto/mvsam/
+F: doc/guides/cryptodevs/mvsam.rst
+F: doc/guides/cryptodevs/features/mvsam.ini
Null Crypto
M: Declan Doherty <declan.doherty@intel.com>
diff --git a/config/common_base b/config/common_base
index 7e45412..f5e04a4 100644
--- a/config/common_base
+++ b/config/common_base
@@ -560,8 +560,8 @@ CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=n
#
# Compile PMD for Marvell Crypto device
#
-CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO=n
-CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO_DEBUG=n
+CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
+CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO_DEBUG=n
#
# Compile generic security library
diff --git a/devtools/test-build.sh b/devtools/test-build.sh
index 12d4ce6..ebc426c 100755
--- a/devtools/test-build.sh
+++ b/devtools/test-build.sh
@@ -202,7 +202,7 @@ config () # <directory> <target> <options>
sed -ri 's,(BBDEV_TURBO_SW=)n,\1y,' $1/.config
sed -ri 's,(SCHED_.*=)n,\1y,' $1/.config
test -z "$LIBMUSDK_PATH" || \
- sed -ri 's,(PMD_MRVL_CRYPTO=)n,\1y,' $1/.config
+ sed -ri 's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
test -z "$LIBMUSDK_PATH" || \
sed -ri 's,(MVPP2_PMD=)n,\1y,' $1/.config
build_config_hook $1 $2 $3
diff --git a/doc/guides/cryptodevs/features/mrvl.ini b/doc/guides/cryptodevs/features/mvsam.ini
similarity index 93%
rename from doc/guides/cryptodevs/features/mrvl.ini
rename to doc/guides/cryptodevs/features/mvsam.ini
index 6d2fe6a..b7c105a 100644
--- a/doc/guides/cryptodevs/features/mrvl.ini
+++ b/doc/guides/cryptodevs/features/mvsam.ini
@@ -1,4 +1,4 @@
-; Supported features of the 'mrvl' crypto driver.
+; Supported features of the 'mvsam' crypto driver.
;
; Refer to default.ini for the full list of available PMD features.
;
diff --git a/doc/guides/cryptodevs/index.rst b/doc/guides/cryptodevs/index.rst
index 0529583..e9928a4 100644
--- a/doc/guides/cryptodevs/index.rst
+++ b/doc/guides/cryptodevs/index.rst
@@ -18,7 +18,7 @@ Crypto Device Drivers
dpaa_sec
kasumi
openssl
- mrvl
+ mvsam
null
scheduler
snow3g
diff --git a/doc/guides/cryptodevs/mrvl.rst b/doc/guides/cryptodevs/mvsam.rst
similarity index 88%
rename from doc/guides/cryptodevs/mrvl.rst
rename to doc/guides/cryptodevs/mvsam.rst
index 443ebcd..fd418c2 100644
--- a/doc/guides/cryptodevs/mrvl.rst
+++ b/doc/guides/cryptodevs/mvsam.rst
@@ -29,10 +29,10 @@
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-MRVL Crypto Poll Mode Driver
-============================
+MVSAM Crypto Poll Mode Driver
+=============================
-The MRVL CRYPTO PMD (**librte_crypto_mrvl_pmd**) provides poll mode crypto driver
+The MVSAM CRYPTO PMD (**librte_crypto_mvsam_pmd**) provides poll mode crypto driver
support by utilizing MUSDK library, which provides cryptographic operations
acceleration by using Security Acceleration Engine (EIP197) directly from
user-space with minimum overhead and high performance.
@@ -40,7 +40,7 @@ user-space with minimum overhead and high performance.
Features
--------
-MRVL CRYPTO PMD has support for:
+MVSAM CRYPTO PMD has support for:
* Symmetric crypto
* Sym operation chaining
@@ -73,22 +73,22 @@ Limitations
Installation
------------
-MRVL CRYPTO PMD driver compilation is disabled by default due to external dependencies.
+MVSAM CRYPTO PMD driver compilation is disabled by default due to external dependencies.
Currently there are two driver specific compilation options in
``config/common_base`` available:
-- ``CONFIG_RTE_LIBRTE_MRVL_CRYPTO`` (default ``n``)
+- ``CONFIG_RTE_LIBRTE_MVSAM_CRYPTO`` (default ``n``)
- Toggle compilation of the librte_pmd_mrvl driver.
+ Toggle compilation of the librte_pmd_mvsam driver.
-- ``CONFIG_RTE_LIBRTE_MRVL_CRYPTO_DEBUG`` (default ``n``)
+- ``CONFIG_RTE_LIBRTE_MVSAM_CRYPTO_DEBUG`` (default ``n``)
Toggle display of debugging messages.
For a list of prerequisites please refer to `Prerequisites` section in
:ref:`MVPP2 Poll Mode Driver <mvpp2_poll_mode_driver>` guide.
-MRVL CRYPTO PMD requires MUSDK built with EIP197 support thus following
+MVSAM CRYPTO PMD requires MUSDK built with EIP197 support thus following
extra option must be passed to the library configuration script:
.. code-block:: console
@@ -101,7 +101,7 @@ to `doc/musdk_get_started.txt`.
Initialization
--------------
-After successfully building MRVL CRYPTO PMD, the following modules need to be
+After successfully building MVSAM CRYPTO PMD, the following modules need to be
loaded:
.. code-block:: console
@@ -118,12 +118,12 @@ The following parameters (all optional) are exported by the driver:
* max_nb_sessions: maximum number of sessions that can be created (2048 by default).
* socket_id: socket on which to allocate the device resources on.
-l2fwd-crypto example application can be used to verify MRVL CRYPTO PMD
+l2fwd-crypto example application can be used to verify MVSAM CRYPTO PMD
operation:
.. code-block:: console
- ./l2fwd-crypto --vdev=eth_mvpp2,iface=eth0 --vdev=crypto_mrvl -- \
+ ./l2fwd-crypto --vdev=eth_mvpp2,iface=eth0 --vdev=crypto_mvsam -- \
--cipher_op ENCRYPT --cipher_algo aes-cbc \
--cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f \
--auth_op GENERATE --auth_algo sha1-hmac \
diff --git a/doc/guides/rel_notes/release_17_11.rst b/doc/guides/rel_notes/release_17_11.rst
index c2e3fc3..5176d69 100644
--- a/doc/guides/rel_notes/release_17_11.rst
+++ b/doc/guides/rel_notes/release_17_11.rst
@@ -184,7 +184,7 @@ New Features
A new crypto PMD has been added, which provides several ciphering and hashing
algorithms. All cryptography operations use the MUSDK library crypto API.
- See the :doc:`../cryptodevs/mrvl` document for more details.
+ See the :doc:`../cryptodevs/mvsam` document for more details.
* **Add new benchmarking mode to dpdk-test-crypto-perf application.**
diff --git a/doc/guides/tools/cryptoperf.rst b/doc/guides/tools/cryptoperf.rst
index 3c0e7d9..c366af4 100644
--- a/doc/guides/tools/cryptoperf.rst
+++ b/doc/guides/tools/cryptoperf.rst
@@ -181,7 +181,7 @@ The following are the appication command-line options:
crypto_dpaa2_sec
crypto_armv8
crypto_scheduler
- crypto_mrvl
+ crypto_mvsam
* ``--optype <name>``
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 28157ac..1d0c88e 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -13,7 +13,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += scheduler
DIRS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += snow3g
DIRS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += kasumi
DIRS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += zuc
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO) += mrvl
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO) += mvsam
DIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += null
ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
DIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += dpaa2_sec
diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index fbe190d..7b3ec13 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
-drivers = ['dpaa_sec', 'dpaa2_sec', 'mrvl',
+drivers = ['dpaa_sec', 'dpaa2_sec', 'mvsam',
'null', 'openssl', 'qat', 'virtio']
std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
diff --git a/drivers/crypto/mrvl/Makefile b/drivers/crypto/mvsam/Makefile
similarity index 80%
rename from drivers/crypto/mrvl/Makefile
rename to drivers/crypto/mvsam/Makefile
index ff12433..c3dc72c 100644
--- a/drivers/crypto/mrvl/Makefile
+++ b/drivers/crypto/mvsam/Makefile
@@ -14,7 +14,7 @@ endif
endif
# library name
-LIB = librte_pmd_mrvl_crypto.a
+LIB = librte_pmd_mvsam_crypto.a
# build flags
CFLAGS += -O3
@@ -27,7 +27,7 @@ CFLAGS += -DMVCONF_DMA_PHYS_ADDR_T_PUBLIC
LIBABIVER := 1
# versioning export map
-EXPORT_MAP := rte_pmd_mrvl_version.map
+EXPORT_MAP := rte_pmd_mvsam_version.map
# external library dependencies
LDLIBS += -L$(LIBMUSDK_PATH)/lib -lmusdk
@@ -36,7 +36,7 @@ LDLIBS += -lrte_cryptodev
LDLIBS += -lrte_bus_vdev
# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO) += rte_mrvl_pmd.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO) += rte_mrvl_pmd_ops.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO) += rte_mrvl_pmd.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO) += rte_mrvl_pmd_ops.c
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/crypto/mrvl/meson.build b/drivers/crypto/mvsam/meson.build
similarity index 100%
rename from drivers/crypto/mrvl/meson.build
rename to drivers/crypto/mvsam/meson.build
diff --git a/drivers/crypto/mrvl/rte_mrvl_compat.h b/drivers/crypto/mvsam/rte_mrvl_compat.h
similarity index 100%
rename from drivers/crypto/mrvl/rte_mrvl_compat.h
rename to drivers/crypto/mvsam/rte_mrvl_compat.h
diff --git a/drivers/crypto/mrvl/rte_mrvl_pmd.c b/drivers/crypto/mvsam/rte_mrvl_pmd.c
similarity index 100%
rename from drivers/crypto/mrvl/rte_mrvl_pmd.c
rename to drivers/crypto/mvsam/rte_mrvl_pmd.c
diff --git a/drivers/crypto/mrvl/rte_mrvl_pmd_ops.c b/drivers/crypto/mvsam/rte_mrvl_pmd_ops.c
similarity index 100%
rename from drivers/crypto/mrvl/rte_mrvl_pmd_ops.c
rename to drivers/crypto/mvsam/rte_mrvl_pmd_ops.c
diff --git a/drivers/crypto/mrvl/rte_mrvl_pmd_private.h b/drivers/crypto/mvsam/rte_mrvl_pmd_private.h
similarity index 98%
rename from drivers/crypto/mrvl/rte_mrvl_pmd_private.h
rename to drivers/crypto/mvsam/rte_mrvl_pmd_private.h
index 1c0d97d..c16d95b 100644
--- a/drivers/crypto/mrvl/rte_mrvl_pmd_private.h
+++ b/drivers/crypto/mvsam/rte_mrvl_pmd_private.h
@@ -9,7 +9,7 @@
#include "rte_mrvl_compat.h"
-#define CRYPTODEV_NAME_MRVL_PMD crypto_mrvl
+#define CRYPTODEV_NAME_MRVL_PMD crypto_mvsam
/**< Marvell PMD device name */
#define MRVL_CRYPTO_LOG_ERR(fmt, args...) \
diff --git a/drivers/crypto/mrvl/rte_pmd_mrvl_version.map b/drivers/crypto/mvsam/rte_pmd_mvsam_version.map
similarity index 100%
rename from drivers/crypto/mrvl/rte_pmd_mrvl_version.map
rename to drivers/crypto/mvsam/rte_pmd_mvsam_version.map
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index a145791..8f0b3b1 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -218,7 +218,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -lrte_pmd_zuc
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -L$(LIBSSO_ZUC_PATH)/build -lsso_zuc
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -lrte_pmd_armv8
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -L$(ARMV8_CRYPTO_LIB_PATH) -larmv8_crypto
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO) += -L$(LIBMUSDK_PATH)/lib -lrte_pmd_mrvl_crypto -lmusdk
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO) += -L$(LIBMUSDK_PATH)/lib -lrte_pmd_mvsam_crypto -lmusdk
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += -lrte_pmd_crypto_scheduler
ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += -lrte_pmd_dpaa2_sec
diff --git a/test/test/meson.build b/test/test/meson.build
index eb3d87a..ee6eb52 100644
--- a/test/test/meson.build
+++ b/test/test/meson.build
@@ -135,7 +135,7 @@ test_names = [
'cryptodev_sw_kasumi_autotest',
'cryptodev_sw_zuc_autotest',
'cryptodev_sw_armv8_autotest',
- 'cryptodev_sw_mrvl_autotest',
+ 'cryptodev_sw_mvsam_autotest',
'cryptodev_dpaa2_sec_autotest',
'cryptodev_dpaa_sec_autotest',
'cycles_autotest',
diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index 2f31ec9..1c9d969 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -316,25 +316,20 @@ testsuite_setup(void)
}
}
- /* Create a MRVL device if required */
+ /* Create a MVSAM device if required */
if (gbl_driver_id == rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_MRVL_PMD))) {
-#ifndef RTE_LIBRTE_PMD_MRVL_CRYPTO
- RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO must be"
- " enabled in config file to run this testsuite.\n");
- return TEST_FAILED;
-#endif
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD))) {
nb_devs = rte_cryptodev_device_count_by_driver(
rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD)));
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD)));
if (nb_devs < 1) {
ret = rte_vdev_init(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD),
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD),
NULL);
TEST_ASSERT(ret == 0, "Failed to create "
"instance of pmd : %s",
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD));
}
}
@@ -2020,7 +2015,7 @@ test_AES_chain_mrvl_all(void)
ts_params->session_mpool,
ts_params->valid_devs[0],
rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD)),
BLKCIPHER_AES_CHAIN_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
@@ -2039,7 +2034,7 @@ test_AES_cipheronly_mrvl_all(void)
ts_params->session_mpool,
ts_params->valid_devs[0],
rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD)),
BLKCIPHER_AES_CIPHERONLY_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
@@ -2058,7 +2053,7 @@ test_authonly_mrvl_all(void)
ts_params->session_mpool,
ts_params->valid_devs[0],
rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD)),
BLKCIPHER_AUTHONLY_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
@@ -2077,7 +2072,7 @@ test_3DES_chain_mrvl_all(void)
ts_params->session_mpool,
ts_params->valid_devs[0],
rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD)),
BLKCIPHER_3DES_CHAIN_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
@@ -2096,7 +2091,7 @@ test_3DES_cipheronly_mrvl_all(void)
ts_params->session_mpool,
ts_params->valid_devs[0],
rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD)),
BLKCIPHER_3DES_CIPHERONLY_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
@@ -9986,11 +9981,11 @@ static int
test_cryptodev_mrvl(void)
{
gbl_driver_id = rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD));
if (gbl_driver_id == -1) {
- RTE_LOG(ERR, USER1, "MRVL PMD must be loaded. Check if "
- "CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO is enabled "
+ RTE_LOG(ERR, USER1, "MVSAM PMD must be loaded. Check if "
+ "CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO is enabled "
"in config file to run this testsuite.\n");
return TEST_SKIPPED;
}
@@ -10083,7 +10078,7 @@ REGISTER_TEST_COMMAND(cryptodev_sw_snow3g_autotest, test_cryptodev_sw_snow3g);
REGISTER_TEST_COMMAND(cryptodev_sw_kasumi_autotest, test_cryptodev_sw_kasumi);
REGISTER_TEST_COMMAND(cryptodev_sw_zuc_autotest, test_cryptodev_sw_zuc);
REGISTER_TEST_COMMAND(cryptodev_sw_armv8_autotest, test_cryptodev_armv8);
-REGISTER_TEST_COMMAND(cryptodev_sw_mrvl_autotest, test_cryptodev_mrvl);
+REGISTER_TEST_COMMAND(cryptodev_sw_mvsam_autotest, test_cryptodev_mrvl);
REGISTER_TEST_COMMAND(cryptodev_dpaa2_sec_autotest, test_cryptodev_dpaa2_sec);
REGISTER_TEST_COMMAND(cryptodev_dpaa_sec_autotest, test_cryptodev_dpaa_sec);
REGISTER_TEST_COMMAND(cryptodev_ccp_autotest, test_cryptodev_ccp);
diff --git a/test/test/test_cryptodev.h b/test/test/test_cryptodev.h
index a630ee8..1bd44dc 100644
--- a/test/test/test_cryptodev.h
+++ b/test/test/test_cryptodev.h
@@ -61,7 +61,7 @@
#define CRYPTODEV_NAME_DPAA_SEC_PMD crypto_dpaa_sec
#define CRYPTODEV_NAME_DPAA2_SEC_PMD crypto_dpaa2_sec
#define CRYPTODEV_NAME_SCHEDULER_PMD crypto_scheduler
-#define CRYPTODEV_NAME_MRVL_PMD crypto_mrvl
+#define CRYPTODEV_NAME_MVSAM_PMD crypto_mvsam
#define CRYPTODEV_NAME_CCP_PMD crypto_ccp
#define CRYPTODEV_NAME_VIRTIO_PMD crypto_virtio
diff --git a/test/test/test_cryptodev_aes_test_vectors.h b/test/test/test_cryptodev_aes_test_vectors.h
index 724c1e0..1c4dc66 100644
--- a/test/test/test_cryptodev_aes_test_vectors.h
+++ b/test/test/test_cryptodev_aes_test_vectors.h
@@ -1171,7 +1171,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1185,7 +1185,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1225,7 +1225,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1239,7 +1239,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1253,7 +1253,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1262,7 +1262,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_13,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
@@ -1290,7 +1290,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1308,7 +1308,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_13,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "AES-128-CBC HMAC-SHA256 Encryption Digest",
@@ -1321,7 +1321,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1330,7 +1330,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_12,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "AES-128-CBC HMAC-SHA256 Decryption Digest "
@@ -1344,7 +1344,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1353,7 +1353,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_12,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "AES-128-CBC HMAC-SHA512 Encryption Digest",
@@ -1365,7 +1365,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1400,7 +1400,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1492,7 +1492,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1506,7 +1506,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1543,7 +1543,7 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
BLOCKCIPHER_TEST_TARGET_PMD_VIRTIO
},
@@ -1557,7 +1557,7 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
BLOCKCIPHER_TEST_TARGET_PMD_VIRTIO
},
@@ -1615,7 +1615,7 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
BLOCKCIPHER_TEST_TARGET_PMD_VIRTIO
},
@@ -1629,7 +1629,7 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
BLOCKCIPHER_TEST_TARGET_PMD_VIRTIO
},
@@ -1667,7 +1667,7 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1680,7 +1680,7 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1717,7 +1717,7 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1730,7 +1730,7 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
diff --git a/test/test/test_cryptodev_blockcipher.c b/test/test/test_cryptodev_blockcipher.c
index e51a124..256a7da 100644
--- a/test/test/test_cryptodev_blockcipher.c
+++ b/test/test/test_cryptodev_blockcipher.c
@@ -69,7 +69,7 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t,
int dpaa_sec_pmd = rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_DPAA_SEC_PMD));
int mrvl_pmd = rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD));
int virtio_pmd = rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_VIRTIO_PMD));
@@ -576,7 +576,7 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
int qat_pmd = rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD));
int mrvl_pmd = rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD));
int virtio_pmd = rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_VIRTIO_PMD));
@@ -642,7 +642,7 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
else if (driver_id == dpaa_sec_pmd)
target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC;
else if (driver_id == mrvl_pmd)
- target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MRVL;
+ target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MVSAM;
else if (driver_id == virtio_pmd)
target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_VIRTIO;
else
diff --git a/test/test/test_cryptodev_blockcipher.h b/test/test/test_cryptodev_blockcipher.h
index 4b88764..6f7c892 100644
--- a/test/test/test_cryptodev_blockcipher.h
+++ b/test/test/test_cryptodev_blockcipher.h
@@ -26,7 +26,7 @@
#define BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER 0x0010 /* Scheduler */
#define BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC 0x0020 /* DPAA2_SEC flag */
#define BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC 0x0040 /* DPAA_SEC flag */
-#define BLOCKCIPHER_TEST_TARGET_PMD_MRVL 0x0080 /* Marvell flag */
+#define BLOCKCIPHER_TEST_TARGET_PMD_MVSAM 0x0080 /* Marvell flag */
#define BLOCKCIPHER_TEST_TARGET_PMD_CCP 0x0040 /* CCP flag */
#define BLOCKCIPHER_TEST_TARGET_PMD_VIRTIO 0x0200 /* VIRTIO flag */
diff --git a/test/test/test_cryptodev_des_test_vectors.h b/test/test/test_cryptodev_des_test_vectors.h
index a30317c..43be83d 100644
--- a/test/test/test_cryptodev_des_test_vectors.h
+++ b/test/test/test_cryptodev_des_test_vectors.h
@@ -826,7 +826,7 @@ static const struct blockcipher_test_case des_cipheronly_test_cases[] = {
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "DES-CBC Decryption",
@@ -835,7 +835,7 @@ static const struct blockcipher_test_case des_cipheronly_test_cases[] = {
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
};
@@ -1079,7 +1079,7 @@ static const struct blockcipher_test_case triple_des_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1090,7 +1090,7 @@ static const struct blockcipher_test_case triple_des_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1098,7 +1098,7 @@ static const struct blockcipher_test_case triple_des_chain_test_cases[] = {
.test_data = &triple_des192cbc_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1106,7 +1106,7 @@ static const struct blockcipher_test_case triple_des_chain_test_cases[] = {
.test_data = &triple_des192cbc_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1232,7 +1232,7 @@ static const struct blockcipher_test_case triple_des_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
@@ -1243,7 +1243,7 @@ static const struct blockcipher_test_case triple_des_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
diff --git a/test/test/test_cryptodev_hash_test_vectors.h b/test/test/test_cryptodev_hash_test_vectors.h
index 8f9f07d..cf86dbb 100644
--- a/test/test/test_cryptodev_hash_test_vectors.h
+++ b/test/test/test_cryptodev_hash_test_vectors.h
@@ -373,14 +373,14 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.test_data = &md5_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "MD5 Digest Verify",
.test_data = &md5_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-MD5 Digest",
@@ -392,7 +392,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-MD5 Digest Verify",
@@ -404,7 +404,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA1 Digest",
@@ -412,7 +412,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA1 Digest Verify",
@@ -420,7 +420,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA1 Digest",
@@ -433,7 +433,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA1 Digest Scatter Gather",
@@ -454,7 +454,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA1 Digest Verify Scatter Gather",
@@ -470,7 +470,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA224 Digest Verify",
@@ -478,7 +478,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA224 Digest",
@@ -510,7 +510,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA256 Digest Verify",
@@ -518,7 +518,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA256 Digest",
@@ -531,7 +531,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA256 Digest Verify",
@@ -544,7 +544,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA384 Digest",
@@ -552,7 +552,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA384 Digest Verify",
@@ -560,7 +560,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA384 Digest",
@@ -573,7 +573,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA384 Digest Verify",
@@ -586,7 +586,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA512 Digest",
@@ -594,7 +594,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA512 Digest Verify",
@@ -602,7 +602,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA512 Digest",
@@ -615,7 +615,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA512 Digest Verify",
@@ -628,7 +628,7 @@ static const struct blockcipher_test_case hash_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "CMAC Digest 12B",
--
2.7.4
next prev parent reply other threads:[~2018-05-08 8:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-26 17:22 [dpdk-dev] [PATCH] " Tomasz Duszynski
2018-04-26 17:38 ` Stephen Hemminger
2018-04-27 5:31 ` Tomasz Duszynski
2018-04-26 18:48 ` Thomas Monjalon
2018-04-27 5:18 ` Tomasz Duszynski
2018-04-27 7:15 ` [dpdk-dev] [PATCH v2] " Tomasz Duszynski
2018-05-07 14:19 ` De Lara Guarch, Pablo
2018-05-08 6:13 ` Tomasz Duszynski
2018-05-08 8:14 ` Tomasz Duszynski [this message]
2018-05-08 8:57 ` [dpdk-dev] [PATCH v3] " De Lara Guarch, Pablo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1525767244-15220-1-git-send-email-tdu@semihalf.com \
--to=tdu@semihalf.com \
--cc=dev@dpdk.org \
--cc=dima@marvell.com \
--cc=nsamsono@marvell.com \
--cc=pablo.de.lara.guarch@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).