[dpdk-dev] [PATCH 1/2] ethdev: fix MAC changes when live change not supported

[Alejandro Lucero <alejandro.lucero@netronome.com>]

Current code assumes a MAC change can occur when the port has been
started. In fact, there are some NICs which require this port state
for being successful, but other NICs not always support MAC change
in that case.

This patch supports a new device flag for a device advertising this
limitation, and if the flag is set, the MAC is changed before the
port starts.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org

Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
---
 lib/librte_ethdev/rte_ethdev.c | 28 +++++++++++++++++++---------
 lib/librte_ethdev/rte_ethdev.h |  2 ++
 2 files changed, 21 insertions(+), 9 deletions(-)

diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index a9977df..8dbc031 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -1254,19 +1254,14 @@ struct rte_eth_dev *
 }
 
 static void
-rte_eth_dev_config_restore(uint16_t port_id)
+rte_eth_dev_mac_restore(struct rte_eth_dev *dev,
+			struct rte_eth_dev_info *dev_info)
 {
-	struct rte_eth_dev *dev;
-	struct rte_eth_dev_info dev_info;
 	struct ether_addr *addr;
 	uint16_t i;
 	uint32_t pool = 0;
 	uint64_t pool_mask;
 
-	dev = &rte_eth_devices[port_id];
-
-	rte_eth_dev_info_get(port_id, &dev_info);
-
 	/* replay MAC address configuration including default MAC */
 	addr = &dev->data->mac_addrs[0];
 	if (*dev->dev_ops->mac_addr_set != NULL)
@@ -1275,7 +1270,7 @@ struct rte_eth_dev *
 		(*dev->dev_ops->mac_addr_add)(dev, addr, 0, pool);
 
 	if (*dev->dev_ops->mac_addr_add != NULL) {
-		for (i = 1; i < dev_info.max_mac_addrs; i++) {
+		for (i = 1; i < dev_info->max_mac_addrs; i++) {
 			addr = &dev->data->mac_addrs[i];
 
 			/* skip zero address */
@@ -1294,6 +1289,14 @@ struct rte_eth_dev *
 			} while (pool_mask);
 		}
 	}
+}
+
+static void
+rte_eth_dev_config_restore(struct rte_eth_dev *dev,
+			   struct rte_eth_dev_info *dev_info, uint16_t port_id)
+{
+	if (!(*dev_info->dev_flags & RTE_ETH_DEV_NOLIVE_MAC_ADDR))
+		rte_eth_dev_mac_restore(dev, dev_info);
 
 	/* replay promiscuous configuration */
 	if (rte_eth_promiscuous_get(port_id) == 1)
@@ -1312,6 +1315,7 @@ struct rte_eth_dev *
 rte_eth_dev_start(uint16_t port_id)
 {
 	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
 	int diag;
 
 	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
@@ -1327,13 +1331,19 @@ struct rte_eth_dev *
 		return 0;
 	}
 
+	rte_eth_dev_info_get(port_id, &dev_info);
+
+	/* Lets restore MAC now if device does not support live change */
+	if (*dev_info.dev_flags & RTE_ETH_DEV_NOLIVE_MAC_ADDR)
+		rte_eth_dev_mac_restore(dev, &dev_info);
+
 	diag = (*dev->dev_ops->dev_start)(dev);
 	if (diag == 0)
 		dev->data->dev_started = 1;
 	else
 		return eth_err(port_id, diag);
 
-	rte_eth_dev_config_restore(port_id);
+	rte_eth_dev_config_restore(dev, &dev_info, port_id);
 
 	if (dev->data->dev_conf.intr_conf.lsc == 0) {
 		RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->link_update, -ENOTSUP);
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 36e3984..85f6908 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -1309,6 +1309,8 @@ struct rte_eth_dev_owner {
 #define RTE_ETH_DEV_INTR_RMV     0x0008
 /** Device is port representor */
 #define RTE_ETH_DEV_REPRESENTOR  0x0010
+/** Device does not support MAC change after started */
+#define RTE_ETH_DEV_NOLIVE_MAC_ADDR  0x0020
 
 /**
  * Iterates over valid ethdev ports owned by a specific owner.
-- 
1.9.1