From: Reshma Pattan <reshma.pattan@intel.com>
To: thomas@monjalon.net, dev@dpdk.org
Cc: anatoly.burakov@intel.com, jananeex.m.parthasarathy@intel.com,
Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Subject: [dpdk-dev] [PATCH v10 4/5] test: add unit test for pdump library
Date: Tue, 31 Jul 2018 23:18:20 +0100 [thread overview]
Message-ID: <1533075501-10135-5-git-send-email-reshma.pattan@intel.com> (raw)
In-Reply-To: <1533075501-10135-1-git-send-email-reshma.pattan@intel.com>
From: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Unit test cases are added for pdump library.
Primary process will act as server, forks a child secondary process.
Secondary process acts as client.
Server will do pdump init to serve any pdump client requests.
Server will create a vdev, send/receive packets continuously
in a separate thread.
Client will create virtual rings to receive the packet dump.
Client sends pdump enable/disable requests using either port/device id.
Packet flow direction can be tx/rx/tx&rx.
In Server, appropriate pdump callbacks are triggered,
when packets are transmitted/received.
Pdump packet is copied to client rings.
Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
---
test/test/Makefile | 6 ++
test/test/process.h | 12 +++
test/test/test.c | 2 +
test/test/test_pdump.c | 232 +++++++++++++++++++++++++++++++++++++++++++++++++
test/test/test_pdump.h | 31 +++++++
5 files changed, 283 insertions(+)
create mode 100644 test/test/test_pdump.c
create mode 100644 test/test/test_pdump.h
diff --git a/test/test/Makefile b/test/test/Makefile
index bba3be1be..3e7baef76 100644
--- a/test/test/Makefile
+++ b/test/test/Makefile
@@ -185,6 +185,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev.c
SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_asym.c
SRCS-$(CONFIG_RTE_LIBRTE_BITRATE) += test_bitratestats.c
SRCS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += test_latencystats.c
+SRCS-$(CONFIG_RTE_LIBRTE_PDUMP) += test_pdump.c
ifeq ($(CONFIG_RTE_COMPRESSDEV_TEST),y)
SRCS-$(CONFIG_RTE_LIBRTE_COMPRESSDEV) += test_compressdev.c
@@ -214,6 +215,11 @@ CFLAGS += $(WERROR_FLAGS)
CFLAGS += -D_GNU_SOURCE
LDLIBS += -lm
+
+ifeq ($(CONFIG_RTE_LIBRTE_PDUMP),y)
+LDLIBS += -lpthread
+endif
+
ifeq ($(CONFIG_RTE_COMPRESSDEV_TEST),y)
ifeq ($(CONFIG_RTE_LIBRTE_COMPRESSDEV),y)
LDLIBS += -lz
diff --git a/test/test/process.h b/test/test/process.h
index ba3a18502..c015c9030 100644
--- a/test/test/process.h
+++ b/test/test/process.h
@@ -18,6 +18,10 @@
#define exe "exe"
#endif
+#include <pthread.h>
+extern void *send_pkts(void *empty);
+extern uint16_t flag_for_send_pkts;
+
/*
* launches a second copy of the test process using the given argv parameters,
* which should include argv[0] as the process name. To identify in the
@@ -31,6 +35,7 @@ process_dup(const char *const argv[], int numargs, const char *env_value)
char *argv_cpy[numargs + 1];
int i, fd, status;
char path[32];
+ pthread_t thread;
pid_t pid = fork();
if (pid < 0)
@@ -61,8 +66,15 @@ process_dup(const char *const argv[], int numargs, const char *env_value)
rte_panic("Cannot exec\n");
}
/* parent process does a wait */
+ if ((strcmp(env_value, "run_pdump_server_tests") == 0))
+ pthread_create(&thread, NULL, &send_pkts, NULL);
+
while (wait(&status) != pid)
;
+ if ((strcmp(env_value, "run_pdump_server_tests") == 0)) {
+ flag_for_send_pkts = 0;
+ pthread_join(thread, NULL);
+ }
return status;
}
diff --git a/test/test/test.c b/test/test/test.c
index 44dfe20ef..a54b0d142 100644
--- a/test/test/test.c
+++ b/test/test/test.c
@@ -30,6 +30,7 @@ extern cmdline_parse_ctx_t main_ctx[];
#endif
#include "test.h"
+#include "test_pdump.h"
#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
@@ -49,6 +50,7 @@ do_recursive_call(void)
int (*action_fn)(void);
} actions[] = {
{ "run_secondary_instances", test_mp_secondary },
+ { "run_pdump_server_tests", test_pdump },
{ "test_missing_c_flag", no_action },
{ "test_master_lcore_flag", no_action },
{ "test_invalid_n_flag", no_action },
diff --git a/test/test/test_pdump.c b/test/test/test_pdump.c
new file mode 100644
index 000000000..cfdda4d39
--- /dev/null
+++ b/test/test/test_pdump.c
@@ -0,0 +1,232 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#include <time.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <inttypes.h>
+#include <sys/queue.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/wait.h>
+
+#include <rte_common.h>
+#include <rte_mbuf.h>
+#include <rte_pdump.h>
+#include <rte_eth_ctrl.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_eal.h>
+#include <rte_ring.h>
+#include <rte_mempool.h>
+#include <rte_eth_ring.h>
+#include <rte_ethdev_driver.h>
+#include <libgen.h>
+
+#include "test.h"
+#include "sample_packet_forward.h"
+#include "test_pdump.h"
+#include "process.h"
+
+#define launch_p(ARGV) process_dup(ARGV, \
+ sizeof(ARGV)/(sizeof(ARGV[0])), __func__)
+
+struct rte_ring *ring_server;
+uint16_t portid;
+uint16_t flag_for_send_pkts = 1;
+
+int
+test_pdump_init(void)
+{
+ int ret = 0;
+
+ ret = rte_pdump_init(NULL);
+ if (ret < 0) {
+ printf("rte_pdump_init failed\n");
+ return -1;
+ }
+ ret = test_ring_setup(&ring_server, &portid);
+ if (ret < 0) {
+ printf("test_ring_setup failed\n");
+ return -1;
+ }
+ printf("pdump_init success\n");
+ return ret;
+}
+
+int
+run_pdump_client_tests(void)
+{
+ int flags = RTE_PDUMP_FLAG_TX, ret = 0, itr;
+ char deviceid[] = "net_ring_net_ringa";
+ struct rte_ring *ring_client;
+ struct rte_mempool *mp = NULL;
+ struct rte_eth_dev *eth_dev = NULL;
+ char poolname[] = "mbuf_pool_client";
+
+ ret = test_get_mempool(&mp, poolname);
+ if (ret < 0)
+ return -1;
+ mp->flags = 0x0000;
+ ring_client = rte_ring_create("SR0", RING_SIZE, rte_socket_id(),
+ RING_F_SP_ENQ | RING_F_SC_DEQ);
+ if (ring_client == NULL) {
+ printf("rte_ring_create SR0 failed");
+ return -1;
+ }
+
+ eth_dev = rte_eth_dev_attach_secondary(deviceid);
+ if (!eth_dev) {
+ printf("Failed to probe %s", deviceid);
+ return -1;
+ }
+ rte_eth_dev_probing_finish(eth_dev);
+
+ ring_client->prod.single = 0;
+ ring_client->cons.single = 0;
+
+ printf("\n***** flags = RTE_PDUMP_FLAG_TX *****\n");
+
+ for (itr = 0; itr < NUM_ITR; itr++) {
+ ret = rte_pdump_enable(portid, QUEUE_ID, flags, ring_client,
+ mp, NULL);
+ if (ret < 0) {
+ printf("rte_pdump_enable failed\n");
+ return -1;
+ }
+ printf("pdump_enable success\n");
+
+ ret = rte_pdump_disable(portid, QUEUE_ID, flags);
+ if (ret < 0) {
+ printf("rte_pdump_disable failed\n");
+ return -1;
+ }
+ printf("pdump_disable success\n");
+
+ ret = rte_pdump_enable_by_deviceid(deviceid, QUEUE_ID, flags,
+ ring_client, mp, NULL);
+ if (ret < 0) {
+ printf("rte_pdump_enable_by_deviceid failed\n");
+ return -1;
+ }
+ printf("pdump_enable_by_deviceid success\n");
+
+ ret = rte_pdump_disable_by_deviceid(deviceid, QUEUE_ID, flags);
+ if (ret < 0) {
+ printf("rte_pdump_disable_by_deviceid failed\n");
+ return -1;
+ }
+ printf("pdump_disable_by_deviceid success\n");
+
+ if (itr == 0) {
+ flags = RTE_PDUMP_FLAG_RX;
+ printf("\n***** flags = RTE_PDUMP_FLAG_RX *****\n");
+ } else if (itr == 1) {
+ flags = RTE_PDUMP_FLAG_RXTX;
+ printf("\n***** flags = RTE_PDUMP_FLAG_RXTX *****\n");
+ }
+ }
+ if (ring_client != NULL)
+ test_ring_free(ring_client);
+ if (mp != NULL)
+ test_mp_free(mp);
+
+ return ret;
+}
+
+int
+test_pdump_uninit(void)
+{
+ int ret = 0;
+
+ ret = rte_pdump_uninit();
+ if (ret < 0) {
+ printf("rte_pdump_uninit failed\n");
+ return -1;
+ }
+ if (ring_server != NULL)
+ test_ring_free(ring_server);
+ printf("pdump_uninit success\n");
+ test_vdev_uninit("net_ring_net_ringa");
+ return ret;
+}
+
+void *
+send_pkts(void *empty)
+{
+ int ret = 0;
+ struct rte_mbuf *pbuf[NUM_PACKETS] = { };
+ struct rte_mempool *mp;
+ char poolname[] = "mbuf_pool_server";
+
+ ret = test_get_mbuf_from_pool(&mp, pbuf, poolname);
+ if (ret < 0)
+ printf("get_mbuf_from_pool failed\n");
+ do {
+ ret = test_packet_forward(pbuf, portid, QUEUE_ID);
+ if (ret < 0)
+ printf("send pkts Failed\n");
+ } while (flag_for_send_pkts);
+ test_put_mbuf_to_pool(mp, pbuf);
+ return empty;
+}
+
+/*
+ * This function is called in the primary i.e. main test, to spawn off secondary
+ * processes to run actual mp tests. Uses fork() and exec pair
+ */
+
+int
+run_pdump_server_tests(void)
+{
+ int ret = 0;
+ char coremask[10];
+
+#ifdef RTE_EXEC_ENV_LINUXAPP
+ char tmp[PATH_MAX] = { 0 };
+ char prefix[PATH_MAX] = { 0 };
+
+ get_current_prefix(tmp, sizeof(tmp));
+ snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
+#else
+ const char *prefix = "";
+#endif
+
+ /* good case, using secondary */
+ const char *const argv1[] = {
+ prgname, "-c", coremask, "--proc-type=secondary",
+ prefix
+ };
+
+ snprintf(coremask, sizeof(coremask), "%x",
+ (1 << rte_get_master_lcore()));
+
+ ret = test_pdump_init();
+ ret |= launch_p(argv1);
+ ret |= test_pdump_uninit();
+ return ret;
+}
+
+int
+test_pdump(void)
+{
+ int ret = 0;
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ printf("IN PRIMARY PROCESS\n");
+ ret = run_pdump_server_tests();
+ if (ret < 0)
+ return TEST_FAILED;
+ } else if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+ printf("IN SECONDARY PROCESS\n");
+ sleep(5);
+ ret = run_pdump_client_tests();
+ if (ret < 0)
+ return TEST_FAILED;
+ }
+ return TEST_SUCCESS;
+}
+
+REGISTER_TEST_COMMAND(pdump_autotest, test_pdump);
diff --git a/test/test/test_pdump.h b/test/test/test_pdump.h
new file mode 100644
index 000000000..abef9a85e
--- /dev/null
+++ b/test/test/test_pdump.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#ifndef _TEST_PDUMP_H_
+#define _TEST_PDUMP_H_
+
+#define QUEUE_ID 0
+#define NUM_ITR 3
+
+/* sample test to send packets to the pdump client recursively */
+void *send_pkts(void *port);
+
+/* Sample test to create setup for the pdump server tests */
+int test_pdump_init(void);
+
+/* Sample test to teardown the pdump server setup */
+int test_pdump_uninit(void);
+
+/* Sample test to run the pdump client tests */
+int run_pdump_client_tests(void);
+
+/* Sample test to run the pdump server tests */
+int run_pdump_server_tests(void);
+
+/* Sample test to run the pdump client and server tests based on
+ * the process type
+ */
+int test_pdump(void);
+
+#endif /* _TEST_PDUMP_H_ */
--
2.14.4
next prev parent reply other threads:[~2018-07-31 22:18 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-31 22:18 [dpdk-dev] [PATCH v10 0/5] add unit tests for bitrate, latency and pdump libraries Reshma Pattan
2018-07-31 22:18 ` [dpdk-dev] [PATCH v10 1/5] test: add helper functions for tests using ring-PMD Rx/Tx Reshma Pattan
2018-07-31 22:18 ` [dpdk-dev] [PATCH v10 2/5] test: add unit tests for bitrate library Reshma Pattan
2018-07-31 22:18 ` [dpdk-dev] [PATCH v10 3/5] test: add unit tests for latencystats library Reshma Pattan
2018-07-31 22:18 ` Reshma Pattan [this message]
2018-07-31 22:18 ` [dpdk-dev] [PATCH v10 5/5] autotest: add new unit tests to autotest list Reshma Pattan
2018-07-31 22:30 ` [dpdk-dev] [PATCH v10 0/5] add unit tests for bitrate, latency and pdump libraries Thomas Monjalon
2018-08-01 7:52 ` Thomas Monjalon
2018-08-03 13:45 ` Pattan, Reshma
2018-08-03 14:11 ` Thomas Monjalon
2018-08-03 14:16 ` Parthasarathy, JananeeX M
2018-08-03 15:01 ` Thomas Monjalon
2018-08-03 12:05 ` [dpdk-dev] [PATCH v11 0/6] " Naga Suresh Somarowthu
2018-08-03 12:05 ` [dpdk-dev] [PATCH v11 1/6] test: add helper functions for tests using ring-PMD Rx/Tx Naga Suresh Somarowthu
2018-08-03 12:05 ` [dpdk-dev] [PATCH v11 2/6] test: add unit tests for bitrate library Naga Suresh Somarowthu
2018-08-03 12:05 ` [dpdk-dev] [PATCH v11 3/6] test: add unit tests for latencystats library Naga Suresh Somarowthu
2018-08-03 12:05 ` [dpdk-dev] [PATCH v11 4/6] test: add unit test for pdump library Naga Suresh Somarowthu
2018-08-03 12:05 ` [dpdk-dev] [PATCH v11 5/6] autotest: add new unit tests to autotest list Naga Suresh Somarowthu
2018-08-03 12:05 ` [dpdk-dev] [PATCH v11 6/6] maintainers: add bitrate latency pdump tests Naga Suresh Somarowthu
2018-08-03 12:34 ` [dpdk-dev] [PATCH v12 0/6] add unit tests for bitrate, latency and pdump libraries Naga Suresh Somarowthu
2018-08-03 12:34 ` [dpdk-dev] [PATCH v12 1/6] test: add helper functions for tests using ring-PMD Rx/Tx Naga Suresh Somarowthu
2018-08-03 12:34 ` [dpdk-dev] [PATCH v12 2/6] test: add unit tests for bitrate library Naga Suresh Somarowthu
2018-08-03 12:34 ` [dpdk-dev] [PATCH v12 3/6] test: add unit tests for latencystats library Naga Suresh Somarowthu
2018-08-03 12:34 ` [dpdk-dev] [PATCH v12 4/6] test: add unit test for pdump library Naga Suresh Somarowthu
2018-08-03 12:34 ` [dpdk-dev] [PATCH v12 5/6] autotest: add new unit tests to autotest list Naga Suresh Somarowthu
2018-08-03 12:34 ` [dpdk-dev] [PATCH v12 6/6] maintainers: add bitrate latency pdump tests Naga Suresh Somarowthu
2018-08-24 12:51 ` [dpdk-dev] [PATCH v13 0/4] add unit tests for bitrate, latency and pdump libraries Naga Suresh Somarowthu
2018-08-24 12:51 ` [dpdk-dev] [PATCH v13 1/4] test: add helper functions for tests using ring-PMD Rx/Tx Naga Suresh Somarowthu
2018-08-24 12:51 ` [dpdk-dev] [PATCH v13 2/4] test: add unit tests for bitrate library Naga Suresh Somarowthu
2018-08-24 12:51 ` [dpdk-dev] [PATCH v13 3/4] test: add unit tests for latencystats library Naga Suresh Somarowthu
2018-08-24 12:51 ` [dpdk-dev] [PATCH v13 4/4] test: add unit test for pdump library Naga Suresh Somarowthu
2018-08-07 8:46 ` [dpdk-dev] [PATCH v11 0/6] add unit tests for bitrate, latency and pdump libraries Burakov, Anatoly
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1533075501-10135-5-git-send-email-reshma.pattan@intel.com \
--to=reshma.pattan@intel.com \
--cc=anatoly.burakov@intel.com \
--cc=dev@dpdk.org \
--cc=jananeex.m.parthasarathy@intel.com \
--cc=naga.sureshx.somarowthu@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).