From: Luca Boccassi <bluca@debian.org>
To: Marco Varlese <mvarlese@suse.de>, dpdk stable <stable@dpdk.org>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [dpdk-stable] 16.11.8 (LTS) patches review and test
Date: Mon, 20 Aug 2018 09:46:14 +0100 [thread overview]
Message-ID: <1534754774.5764.76.camel@debian.org> (raw)
In-Reply-To: <32a48b23334b89d9b53de0e2db242b620d9a7f90.camel@suse.de>
Great, thanks for checking!
On Mon, 2018-08-20 at 08:46 +0200, Marco Varlese wrote:
> Hi Luca & all,
>
> I have gone through the usual smoke tests using test_pmd and OvS-
> DPDK.
> I have not experienced any issues with the -rc1 release.
>
>
> Thanks,
> Marco
>
> On Mon, 2018-08-13 at 19:21 +0100, luca.boccassi@gmail.com wrote:
> > Hi all,
> >
> > Here is a list of patches targeted for LTS release 16.11.8. Please
> > help review and test. The planned date for the final release is
> > August
> > the 23rd.
> > Before that, please shout if anyone has objections with these
> > patches being applied.
> >
> > Also for the companies committed to running regression tests,
> > please run the tests and report any issue before the release date.
> >
> > A release candidate tarball can be found at:
> >
> > https://dpdk.org/browse/dpdk-stable/tag/?id=v16.11.8-rc1
> >
> > These patches are located at branch 16.11 of dpdk-stable repo:
> > https://dpdk.org/browse/dpdk-stable/
> >
> > Thanks.
> >
> > Luca Boccassi
> >
> > ---
> > Adrien Mazarguil (1):
> > maintainers: update for Mellanox PMDs
> >
> > Ajit Khaparde (6):
> > net/bnxt: fix HW Tx checksum offload check
> > net/bnxt: fix incorrect IO address handling in Tx
> > net/bnxt: fix Rx ring count limitation
> > net/bnxt: check access denied for HWRM commands
> > net/bnxt: fix RETA size
> > net/bnxt: fix close operation
> >
> > Alejandro Lucero (1):
> > net/nfp: fix field initialization in Tx descriptor
> >
> > Anatoly Burakov (2):
> > eal/linux: fix invalid syntax in interrupts
> > test: fix EAL flags autotest on FreeBSD
> >
> > Beilei Xing (1):
> > net/i40e: fix shifts of 32-bit value
> >
> > Bruce Richardson (2):
> > examples/exception_path: fix out-of-bounds read
> > mk: fix permissions when using make install
> >
> > Chas Williams (1):
> > net/bonding: do not clear active slave count
> >
> > Damjan Marion (1):
> > net/i40e: do not reset device info data
> >
> > Dan Gora (1):
> > kni: fix crash with null name
> >
> > Daria Kolistratova (1):
> > net/ena: fix SIGFPE with 0 Rx queue
> >
> > Dariusz Stojaczyk (1):
> > eal: fix return codes on thread naming failure
> >
> > Drocula Lambda (1):
> > kni: fix build on RHEL 7.5
> >
> > Emma Kenny (1):
> > examples/multi_process: build l2fwd_fork app
> >
> > Ferruh Yigit (2):
> > kni: fix build with gcc 8.1
> > net/thunderx: fix build with gcc optimization on
> >
> > Fiona Trahe (1):
> > crypto/qat: fix checks for 3GPP algo bit params
> >
> > Gage Eads (1):
> > net: rename u16 to fix shadowed declaration
> >
> > Gavin Hu (1):
> > maintainers: claim maintainership for ARM v7 and v8
> >
> > Haiyue Wang (2):
> > mbuf: fix typo in IPv6 macro comment
> > net/i40e: workaround performance degradation
> >
> > Hemant Agrawal (1):
> > test/crypto: fix device id when stopping port
> >
> > Hyong Youb Kim (1):
> > net/enic: do not overwrite admin Tx queue limit
> >
> > Ido Goshen (1):
> > net/pcap: fix multiple queues
> >
> > Jerin Jacob (2):
> > ethdev: fix queue statistics mapping documentation
> > eal: fix bitmap documentation
> >
> > Kiran Kumar (3):
> > net/bonding: fix MAC address reset
> > ethdev: check queue stats mapping input arguments
> > net/thunderx: avoid sq door bell write on zero packet
> >
> > Konstantin Ananyev (3):
> > examples/ipsec-secgw: fix IPv4 checksum at Tx
> > examples/ipsec-secgw: fix bypass rule processing
> > app/testpmd: fix DCB config
> >
> > Maxime Coquelin (1):
> > vhost: fix missing increment of log cache count
> >
> > Pablo de Lara (3):
> > test/hash: fix multiwriter with non consecutive cores
> > test/hash: fix potential memory leak
> > hash: fix doxygen of return values
> >
> > Radu Nicolau (2):
> > test: fix uninitialized port configuration
> > net/bonding: fix race condition
> >
> > Rafal Kozik (4):
> > net/ena: check pointer before memset
> > net/ena: change memory type
> > net/ena: fix GENMASK_ULL macro
> > net/ena: set link speed as none
> >
> > Rahul Lakkireddy (2):
> > net/cxgbe/base: update flash part information
> > net/cxgbe: fix init failure due to new flash parts
> >
> > Rami Rosen (2):
> > examples/l3fwd: remove useless include
> > ethdev: fix a doxygen comment for port allocation
> >
> > Rasesh Mody (3):
> > net/qede: fix default extended VLAN offload config
> > net/qede/base: fix GRC attention callback
> > net/bnx2x: fix FW command timeout during stop
> >
> > Shahed Shaikh (1):
> > net/qede: fix MAC address removal failure message
> >
> > Shreyansh Jain (1):
> > doc: fix bonding command in testpmd
> >
> > Wei Zhao (6):
> > net/ixgbe: fix tunnel id format error for FDIR
> > net/ixgbe: fix tunnel type set error for FDIR
> > net/ixgbe: fix mask bits register set error for FDIR
> > app/testpmd: fix VLAN TCI mask set error for FDIR
> > net/i40e: fix check of flow director programming status
> > net/i40e: revert fix of flow director check
> >
> > Xiaoxin Peng (1):
> > net/bnxt: fix Tx with multiple mbuf
> >
> > Xiaoyun Li (1):
> > net/i40e: fix link speed
> >
> > Yipeng Wang (3):
> > hash: fix multiwriter lock memory allocation
> > hash: fix a multi-writer race condition
> > hash: fix key slot size accuracy
--
Kind regards,
Luca Boccassi
next prev parent reply other threads:[~2018-08-20 8:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-13 18:21 [dpdk-dev] " luca.boccassi
2018-08-20 6:46 ` [dpdk-dev] [dpdk-stable] " Marco Varlese
2018-08-20 8:46 ` Luca Boccassi [this message]
2018-08-20 8:46 ` [dpdk-dev] " Luca Boccassi
2018-08-23 8:55 ` Luca Boccassi
2018-08-27 16:17 ` Luca Boccassi
2018-08-29 9:55 ` Luca Boccassi
2018-08-29 10:58 ` Marco Varlese
2018-08-29 13:28 ` Marco Varlese
2018-08-29 13:36 ` [dpdk-dev] [dpdk-stable] " Luca Boccassi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1534754774.5764.76.camel@debian.org \
--to=bluca@debian.org \
--cc=dev@dpdk.org \
--cc=mvarlese@suse.de \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).