DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] net/ixgbe: firmware status check
@ 2018-09-07 15:01 Xiaoyun Li
  2018-09-13  2:27 ` Zhang, Qi Z
  2018-09-26  9:04 ` [dpdk-dev] [PATCH v2] " Xiaoyun Li
  0 siblings, 2 replies; 5+ messages in thread
From: Xiaoyun Li @ 2018-09-07 15:01 UTC (permalink / raw)
  To: wenzhuo.lu, dev, helin.zhang, jingjing.wu; +Cc: Xiaoyun Li

Check the firmware status at init time. If the firmware is in
recovery mode, alert the user to check it.

Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
---
v1:
 * This patch needs base code updating which will be done later.
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 26b1927..263c72b 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -1107,6 +1107,14 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 	hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
 	hw->allow_unsupported_sfp = 1;
 
+	if (hw->mac.ops.fw_recovery_mode && hw->mac.ops.fw_recovery_mode(hw)) {
+		PMD_INIT_LOG(ERR, "\nERROR:"
+			"Firmware recovery mode detected. Limiting functionality.\n"
+			"Refer to the Intel(R) Ethernet Adapters and Devices "
+			"User Guide for details on firmware recovery mode.");
+		return -EIO;
+	}
+
 	/* Initialize the shared code (base driver) */
 #ifdef RTE_LIBRTE_IXGBE_BYPASS
 	diag = ixgbe_bypass_init_shared_code(hw);
-- 
2.7.4

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2018-09-26 12:31 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-07 15:01 [dpdk-dev] [PATCH] net/ixgbe: firmware status check Xiaoyun Li
2018-09-13  2:27 ` Zhang, Qi Z
2018-09-26  9:04 ` [dpdk-dev] [PATCH v2] " Xiaoyun Li
2018-09-26 10:58   ` Zhang, Qi Z
2018-09-26 12:31     ` Ferruh Yigit

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).