From: Igor Russkikh <igor.russkikh@aquantia.com>
To: dev@dpdk.org
Cc: pavel.belous@aquantia.com, Nadezhda.Krupnina@aquantia.com,
igor.russkikh@aquantia.com, Simon.Edelhaus@aquantia.com,
Corey Melton <comelton@cisco.com>,
Ashish Kumar <ashishk2@cisco.com>
Subject: [dpdk-dev] [PATCH 19/21] net/atlantic: device MTU and statuses
Date: Fri, 7 Sep 2018 18:21:57 +0300 [thread overview]
Message-ID: <1536333719-32155-20-git-send-email-igor.russkikh@aquantia.com> (raw)
In-Reply-To: <1536333719-32155-1-git-send-email-igor.russkikh@aquantia.com>
From: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
---
drivers/net/atlantic/atl_ethdev.c | 160 ++++++++++++++++++++++++++++++++++++++
1 file changed, 160 insertions(+)
diff --git a/drivers/net/atlantic/atl_ethdev.c b/drivers/net/atlantic/atl_ethdev.c
index 80b7ac88e..44cea12ab 100644
--- a/drivers/net/atlantic/atl_ethdev.c
+++ b/drivers/net/atlantic/atl_ethdev.c
@@ -78,11 +78,14 @@ static int atl_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
uint8_t is_rx);
+static int atl_fw_version_get(struct rte_eth_dev *dev, char *fw_version, size_t fw_size);
static void atl_dev_info_get(struct rte_eth_dev *dev,
struct rte_eth_dev_info *dev_info);
static const uint32_t *atl_dev_supported_ptypes_get(struct rte_eth_dev *dev);
+static int atl_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
+
/* VLAN stuff */
static int atl_vlan_filter_set(struct rte_eth_dev *dev,
@@ -111,6 +114,9 @@ static int atl_flow_ctrl_get(struct rte_eth_dev *dev,
struct rte_eth_fc_conf *fc_conf);
static int atl_flow_ctrl_set(struct rte_eth_dev *dev,
struct rte_eth_fc_conf *fc_conf);
+
+static void atl_dev_link_status_print(struct rte_eth_dev *dev);
+
/* Interrupts */
static int atl_dev_rxq_interrupt_setup(struct rte_eth_dev *dev);
static int atl_dev_lsc_interrupt_setup(struct rte_eth_dev *dev, uint8_t on);
@@ -189,6 +195,20 @@ static struct rte_pci_driver rte_atl_pmd = {
.remove = eth_atl_pci_remove,
};
+#define ATL_RX_OFFLOADS ( DEV_RX_OFFLOAD_VLAN_STRIP \
+ | DEV_RX_OFFLOAD_IPV4_CKSUM \
+ | DEV_RX_OFFLOAD_UDP_CKSUM \
+ | DEV_RX_OFFLOAD_TCP_CKSUM \
+ | DEV_RX_OFFLOAD_JUMBO_FRAME \
+ | DEV_RX_OFFLOAD_CRC_STRIP)
+
+#define ATL_TX_OFFLOADS ( DEV_TX_OFFLOAD_VLAN_INSERT \
+ | DEV_TX_OFFLOAD_IPV4_CKSUM \
+ | DEV_TX_OFFLOAD_UDP_CKSUM \
+ | DEV_TX_OFFLOAD_TCP_CKSUM \
+ | DEV_TX_OFFLOAD_TCP_TSO \
+ | DEV_TX_OFFLOAD_MULTI_SEGS)
+
static const struct rte_eth_desc_lim rx_desc_lim = {
.nb_max = ATL_MAX_RING_DESC,
.nb_min = ATL_MIN_RING_DESC,
@@ -257,6 +277,12 @@ static const struct eth_dev_ops atl_eth_dev_ops = {
.xstats_get_names = atl_dev_xstats_get_names,
.stats_reset = atl_dev_stats_reset,
.xstats_reset = atl_dev_xstats_reset,
+ .fw_version_get = atl_fw_version_get,
+ .dev_infos_get = atl_dev_info_get,
+ .dev_supported_ptypes_get = atl_dev_supported_ptypes_get,
+
+ .mtu_set = atl_dev_mtu_set,
+
/* VLAN */
.vlan_filter_set = atl_vlan_filter_set,
.vlan_offload_set = atl_vlan_offload_set,
@@ -657,6 +683,7 @@ atl_dev_start(struct rte_eth_dev *dev)
return 0;
error:
+ PMD_INIT_LOG(ERR, "failure in atl_dev_start(): %d", err);
atl_stop_queues(dev);
return -EIO;
}
@@ -837,6 +864,94 @@ atl_dev_xstats_reset(struct rte_eth_dev *dev __rte_unused)
{
return;
}
+
+
+static int
+atl_fw_version_get(struct rte_eth_dev *dev, char *fw_version, size_t fw_size)
+{
+ struct aq_hw_s *hw = ATL_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t fw_ver = 0;
+ unsigned int ret = 0;
+
+ ret = hw_atl_utils_get_fw_version(hw, &fw_ver);
+ if (ret)
+ return 0;
+
+ ret = snprintf(fw_version, fw_size, "%u.%u.%u", fw_ver >> 24, (fw_ver >> 16) & 0xFFU, fw_ver & 0xFFFFU);
+
+ ret += 1; /* add string null-terminator */
+
+ if (fw_size < ret)
+ return ret;
+
+ return 0;
+}
+
+static void
+atl_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
+{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+
+ dev_info->max_rx_queues = AQ_HW_MAX_RX_QUEUES;
+ dev_info->max_tx_queues = AQ_HW_MAX_TX_QUEUES;
+
+ dev_info->min_rx_bufsize = 1024;
+ dev_info->max_rx_pktlen = HW_ATL_B0_MTU_JUMBO;
+ dev_info->max_mac_addrs = HW_ATL_B0_MAC_MAX;
+ dev_info->max_vfs = pci_dev->max_vfs;
+
+ dev_info->max_hash_mac_addrs = 0;
+ dev_info->max_vmdq_pools = 0;
+ dev_info->vmdq_queue_num = 0;
+
+ dev_info->rx_offload_capa = ATL_RX_OFFLOADS;
+
+ dev_info->tx_offload_capa = ATL_TX_OFFLOADS;
+
+
+ dev_info->default_rxconf = (struct rte_eth_rxconf) {
+ .rx_free_thresh = ATL_DEFAULT_RX_FREE_THRESH,
+ };
+
+ dev_info->default_txconf = (struct rte_eth_txconf) {
+ .tx_free_thresh = ATL_DEFAULT_TX_FREE_THRESH,
+ };
+
+ dev_info->rx_desc_lim = rx_desc_lim;
+ dev_info->tx_desc_lim = tx_desc_lim;
+
+ dev_info->hash_key_size = HW_ATL_B0_RSS_HASHKEY_BITS/8;
+ dev_info->reta_size = HW_ATL_B0_RSS_REDIRECTION_MAX;
+ dev_info->flow_type_rss_offloads = ATL_RSS_OFFLOAD_ALL;
+
+ dev_info->speed_capa = ETH_LINK_SPEED_1G | ETH_LINK_SPEED_10G;
+ dev_info->speed_capa |= ETH_LINK_SPEED_100M;
+ dev_info->speed_capa |= ETH_LINK_SPEED_2_5G;
+ dev_info->speed_capa |= ETH_LINK_SPEED_5G;
+}
+
+static const uint32_t *
+atl_dev_supported_ptypes_get(struct rte_eth_dev *dev)
+{
+ static const uint32_t ptypes[] = {
+ RTE_PTYPE_L2_ETHER,
+ RTE_PTYPE_L2_ETHER_ARP,
+ RTE_PTYPE_L2_ETHER_VLAN,
+ RTE_PTYPE_L3_IPV4,
+ RTE_PTYPE_L3_IPV6,
+ RTE_PTYPE_L4_TCP,
+ RTE_PTYPE_L4_UDP,
+ RTE_PTYPE_L4_SCTP,
+ RTE_PTYPE_L4_ICMP,
+ RTE_PTYPE_UNKNOWN
+ };
+
+ if (dev->rx_pkt_burst == atl_recv_pkts)
+ return ptypes;
+
+ return NULL;
+}
+
/* return 0 means link status changed, -1 means not changed */
static int
atl_dev_link_update(struct rte_eth_dev *dev, int wait __rte_unused)
@@ -1254,6 +1369,38 @@ atl_set_default_mac_addr(struct rte_eth_dev *dev, struct ether_addr *addr)
return 0;
}
+static bool
+is_device_supported(struct rte_eth_dev *dev, struct rte_pci_driver *drv)
+{
+ if (strcmp(dev->device->driver->name, drv->driver.name))
+ return false;
+
+ return true;
+}
+
+bool
+is_atl_supported(struct rte_eth_dev *dev)
+{
+ return is_device_supported(dev, &rte_atl_pmd);
+}
+
+static int
+atl_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct rte_eth_dev_info dev_info;
+ uint32_t frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
+
+ atl_dev_info_get(dev, &dev_info);
+
+ if ((mtu < ETHER_MIN_MTU) || (frame_size > dev_info.max_rx_pktlen))
+ return -EINVAL;
+
+ /* update max frame size */
+ dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+
+ return 0;
+}
+
static int
atl_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
{
@@ -1501,3 +1648,16 @@ atl_rss_hash_conf_get(struct rte_eth_dev *dev,
RTE_PMD_REGISTER_PCI(net_atlantic, rte_atl_pmd);
RTE_PMD_REGISTER_PCI_TABLE(net_atlantic, pci_id_atl_map);
RTE_PMD_REGISTER_KMOD_DEP(net_atlantic, "* igb_uio | uio_pci_generic");
+
+RTE_INIT(atl_init_log);
+static void
+atl_init_log(void)
+{
+ atl_logtype_init = rte_log_register("pmd.atlantic.init");
+ if (atl_logtype_init >= 0)
+ rte_log_set_level(atl_logtype_init, RTE_LOG_DEBUG);
+ atl_logtype_driver = rte_log_register("pmd.atlantic.driver");
+ if (atl_logtype_driver >= 0)
+ rte_log_set_level(atl_logtype_driver, RTE_LOG_DEBUG);
+}
+
--
2.13.3.windows.1
next prev parent reply other threads:[~2018-09-07 15:23 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-07 15:21 [dpdk-dev] [PATCH 00/21] net/atlantic: Aquantia aQtion 10G NIC Family DPDK PMD driver Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 01/21] net/atlantic: atlantic PMD driver skeleton Igor Russkikh
2018-09-11 17:02 ` Stephen Hemminger
2018-09-12 11:49 ` Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 02/21] net/atlantic: documentation and rel notes Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 03/21] net/atlantic: logging macroes and some typedefs Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 04/21] net/atlantic: hw_atl register declarations Igor Russkikh
2018-09-11 17:04 ` Stephen Hemminger
2018-09-07 15:21 ` [dpdk-dev] [PATCH 05/21] net/atlantic: b0 hardware layer main logic Igor Russkikh
2018-09-11 17:04 ` Stephen Hemminger
2018-09-11 17:05 ` Stephen Hemminger
2018-09-07 15:21 ` [dpdk-dev] [PATCH 06/21] net/atlantic: firmware operations layer Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 07/21] net/atlantic: hardware register access routines Igor Russkikh
2018-09-24 6:29 ` Hemant
2018-09-24 9:00 ` Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 08/21] net/atlantic: rte device start, stop, initial configuration Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 09/21] net/atlantic: link status and interrupt management Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 10/21] net/atlantic: add hw adapter structures and defines Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 11/21] net/atlantic: RSS and RETA manipulation API Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 12/21] net/atlantic: flow control configuration Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 13/21] net/atlantic: MAC address manipulations Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 14/21] net/atlantic: eeprom and register manipulation routines Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 15/21] net/atlantic: LED control DPDK and private APIs Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 16/21] net/atlantic: promisc and allmulti configuration Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 17/21] net/atlantic: device statistics, xstats Igor Russkikh
2018-09-11 17:06 ` Stephen Hemminger
2018-09-07 15:21 ` [dpdk-dev] [PATCH 18/21] net/atlantic: VLAN filters and offloads Igor Russkikh
2018-09-07 15:21 ` Igor Russkikh [this message]
2018-09-07 15:21 ` [dpdk-dev] [PATCH 20/21] net/atlantic: RX side structures and implementation Igor Russkikh
2018-09-07 15:21 ` [dpdk-dev] [PATCH 21/21] net/atlantic: TX " Igor Russkikh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1536333719-32155-20-git-send-email-igor.russkikh@aquantia.com \
--to=igor.russkikh@aquantia.com \
--cc=Nadezhda.Krupnina@aquantia.com \
--cc=Simon.Edelhaus@aquantia.com \
--cc=ashishk2@cisco.com \
--cc=comelton@cisco.com \
--cc=dev@dpdk.org \
--cc=pavel.belous@aquantia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).