From: Beilei Xing <beilei.xing@intel.com>
To: qi.z.zhang@intel.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3] net/i40e: add alarm handler
Date: Tue, 11 Sep 2018 11:35:41 +0800 [thread overview]
Message-ID: <1536636941-63922-1-git-send-email-beilei.xing@intel.com> (raw)
In-Reply-To: <1532655382-4612-1-git-send-email-beilei.xing@intel.com>
This patch adds alarm handler, and then i40e
PF will use alarm handler instead of interrupt
handler when device is started and Rx interrupt
mode is disabled. This way will save CPU cycles
during receiving packets.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 67 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 65 insertions(+), 2 deletions(-)
v3 changes:
- Replace interrupt handler with alarm handler when device is started.
v2 changes:
- Remove PF interrupt handler only when multi-driver is enabled.
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 85a6a86..31b5a49 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -292,6 +292,7 @@ static void i40e_stat_update_48(struct i40e_hw *hw,
uint64_t *stat);
static void i40e_pf_config_irq0(struct i40e_hw *hw, bool no_queue);
static void i40e_dev_interrupt_handler(void *param);
+static void i40e_dev_alarm_handler(void *param);
static int i40e_res_pool_init(struct i40e_res_pool_info *pool,
uint32_t base, uint32_t num);
static void i40e_res_pool_destroy(struct i40e_res_pool_info *pool);
@@ -1201,6 +1202,8 @@ i40e_aq_debug_write_global_register(struct i40e_hw *hw,
return i40e_aq_debug_write_register(hw, reg_addr, reg_val, cmd_details);
}
+#define I40E_ALARM_INTERVAL 50000 /* us */
+
static int
eth_i40e_dev_init(struct rte_eth_dev *dev, void *init_params __rte_unused)
{
@@ -2293,8 +2296,13 @@ i40e_dev_start(struct rte_eth_dev *dev)
i40e_dev_link_update(dev, 0);
}
- /* enable uio intr after callback register */
- rte_intr_enable(intr_handle);
+ if (dev->data->dev_conf.intr_conf.rxq == 0) {
+ rte_eal_alarm_set(I40E_ALARM_INTERVAL,
+ i40e_dev_alarm_handler, dev);
+ } else {
+ /* enable uio intr after callback register */
+ rte_intr_enable(intr_handle);
+ }
i40e_filter_restore(pf);
@@ -2324,6 +2332,12 @@ i40e_dev_stop(struct rte_eth_dev *dev)
if (hw->adapter_stopped == 1)
return;
+
+ if (dev->data->dev_conf.intr_conf.rxq == 0) {
+ rte_eal_alarm_cancel(i40e_dev_alarm_handler, dev);
+ rte_intr_enable(intr_handle);
+ }
+
/* Disable all queues */
i40e_dev_switch_queues(pf, FALSE);
@@ -6552,6 +6566,55 @@ i40e_dev_interrupt_handler(void *param)
rte_intr_enable(dev->intr_handle);
}
+static void
+i40e_dev_alarm_handler(void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t icr0;
+
+ /* Disable interrupt */
+ i40e_pf_disable_irq0(hw);
+
+ /* read out interrupt causes */
+ icr0 = I40E_READ_REG(hw, I40E_PFINT_ICR0);
+
+ /* No interrupt event indicated */
+ if (!(icr0 & I40E_PFINT_ICR0_INTEVENT_MASK)) {
+ PMD_DRV_LOG(INFO, "No interrupt event");
+ goto done;
+ }
+ if (icr0 & I40E_PFINT_ICR0_ECC_ERR_MASK)
+ PMD_DRV_LOG(ERR, "ICR0: unrecoverable ECC error");
+ if (icr0 & I40E_PFINT_ICR0_MAL_DETECT_MASK)
+ PMD_DRV_LOG(ERR, "ICR0: malicious programming detected");
+ if (icr0 & I40E_PFINT_ICR0_GRST_MASK)
+ PMD_DRV_LOG(INFO, "ICR0: global reset requested");
+ if (icr0 & I40E_PFINT_ICR0_PCI_EXCEPTION_MASK)
+ PMD_DRV_LOG(INFO, "ICR0: PCI exception activated");
+ if (icr0 & I40E_PFINT_ICR0_STORM_DETECT_MASK)
+ PMD_DRV_LOG(INFO, "ICR0: a change in the storm control state");
+ if (icr0 & I40E_PFINT_ICR0_HMC_ERR_MASK)
+ PMD_DRV_LOG(ERR, "ICR0: HMC error");
+ if (icr0 & I40E_PFINT_ICR0_PE_CRITERR_MASK)
+ PMD_DRV_LOG(ERR, "ICR0: protocol engine critical error");
+
+ if (icr0 & I40E_PFINT_ICR0_VFLR_MASK) {
+ PMD_DRV_LOG(INFO, "ICR0: VF reset detected");
+ i40e_dev_handle_vfr_event(dev);
+ }
+ if (icr0 & I40E_PFINT_ICR0_ADMINQ_MASK) {
+ PMD_DRV_LOG(INFO, "ICR0: adminq event");
+ i40e_dev_handle_aq_msg(dev);
+ }
+
+done:
+ /* Enable interrupt */
+ i40e_pf_enable_irq0(hw);
+ rte_eal_alarm_set(I40E_ALARM_INTERVAL,
+ i40e_dev_alarm_handler, dev);
+}
+
int
i40e_add_macvlan_filters(struct i40e_vsi *vsi,
struct i40e_macvlan_filter *filter,
--
2.5.5
next prev parent reply other threads:[~2018-09-11 3:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-26 5:14 [dpdk-dev] [PATCH] net/i40e: remove PF interrupt handler Beilei Xing
2018-07-27 1:36 ` [dpdk-dev] [PATCH v2] net/i40e: remove PF interrupt handler for multi-driver Beilei Xing
2018-09-11 3:35 ` Beilei Xing [this message]
2018-09-11 13:04 ` [dpdk-dev] [PATCH v3] net/i40e: add alarm handler Zhang, Qi Z
2018-09-17 11:07 ` Ferruh Yigit
2018-09-18 2:52 ` Xing, Beilei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1536636941-63922-1-git-send-email-beilei.xing@intel.com \
--to=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=qi.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).