From: Fiona Trahe <fiona.trahe@intel.com>
To: dev@dpdk.org
Cc: akhil.goyal@nxp.com, stable@dpdk.org, tomaszx.jozwiak@intel.com,
Fiona Trahe <fiona.trahe@intel.com>
Subject: [dpdk-dev] [PATCH] common/qat: add support for GEN3 devices
Date: Mon, 1 Oct 2018 22:17:44 +0100 [thread overview]
Message-ID: <1538428664-15776-1-git-send-email-fiona.trahe@intel.com> (raw)
This adds pci detection, queue-pair configuration and
documentation for Intel GEN3 QuickAssist devices.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
doc/guides/cryptodevs/qat.rst | 3 +++
doc/guides/rel_notes/release_18_11.rst | 4 ++++
drivers/common/qat/qat_common.h | 3 ++-
drivers/common/qat/qat_device.c | 11 +++++++++-
drivers/common/qat/qat_qp.c | 38 ++++++++++++++++++++++++++++++++++
drivers/common/qat/qat_qp.h | 1 +
drivers/compress/qat/qat_comp_pmd.c | 1 +
drivers/crypto/qat/qat_sym_pmd.c | 1 +
8 files changed, 60 insertions(+), 2 deletions(-)
diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index 5793e36..7d51084 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -23,6 +23,7 @@ hardware accelerator devices:
* ``Intel QuickAssist Technology C62x``
* ``Intel QuickAssist Technology C3xxx``
* ``Intel QuickAssist Technology D15xx``
+* ``Intel QuickAssist Technology C4xxx``
Features
@@ -254,6 +255,8 @@ to check that the driver and device supports the service you require.
+-----+----------+---------------+---------------+------------+--------+------+--------+--------+-----------+-------------+
| 2 | D15xx | p | qat_d15xx | d15xx | 6f54 | 1 | 6f55 | 16 | Yes | No |
+-----+----------+---------------+---------------+------------+--------+------+--------+--------+-----------+-------------+
+ | 3 | C4xxx | p | qat_c4xxx | c4xxx | 18a0 | 1 | 18a1 | 128 | Yes | No |
+ +-----+----------+---------------+---------------+------------+--------+------+--------+--------+-----------+-------------+
The ``Driver`` column indicates either the Linux kernel version in which
diff --git a/doc/guides/rel_notes/release_18_11.rst b/doc/guides/rel_notes/release_18_11.rst
index 9c00e33..f97f39a 100644
--- a/doc/guides/rel_notes/release_18_11.rst
+++ b/doc/guides/rel_notes/release_18_11.rst
@@ -88,6 +88,10 @@ New Features
the specified port. The port must be stopped before the command call in order
to reconfigure queues.
+* **Added support for GEN3 devices to Intel QAT driver .**
+
+ Added support for the third generation of Intel QuickAssist devices.
+
API Changes
-----------
diff --git a/drivers/common/qat/qat_common.h b/drivers/common/qat/qat_common.h
index d4bef53..de9a3ba 100644
--- a/drivers/common/qat/qat_common.h
+++ b/drivers/common/qat/qat_common.h
@@ -17,7 +17,8 @@
*/
enum qat_device_gen {
QAT_GEN1 = 1,
- QAT_GEN2
+ QAT_GEN2,
+ QAT_GEN3
};
enum qat_service_type {
diff --git a/drivers/common/qat/qat_device.c b/drivers/common/qat/qat_device.c
index f32d723..b158fb9 100644
--- a/drivers/common/qat/qat_device.c
+++ b/drivers/common/qat/qat_device.c
@@ -20,6 +20,10 @@ struct qat_gen_hw_data qat_gen_config[] = {
.qp_hw_data = qat_gen1_qps,
/* gen2 has same ring layout as gen1 */
},
+ [QAT_GEN3] = {
+ .dev_gen = QAT_GEN3,
+ .qp_hw_data = qat_gen3_qps,
+ },
};
@@ -43,10 +47,12 @@ static const struct rte_pci_id pci_id_qat_map[] = {
{
RTE_PCI_DEVICE(0x8086, 0x6f55),
},
+ {
+ RTE_PCI_DEVICE(0x8086, 0x18a1),
+ },
{.device_id = 0},
};
-
static struct qat_pci_device *
qat_pci_get_dev(uint8_t dev_id)
{
@@ -130,6 +136,9 @@ qat_pci_device_allocate(struct rte_pci_device *pci_dev)
case 0x6f55:
qat_dev->qat_dev_gen = QAT_GEN2;
break;
+ case 0x18a1:
+ qat_dev->qat_dev_gen = QAT_GEN3;
+ break;
default:
QAT_LOG(ERR, "Invalid dev_id, can't determine generation");
return NULL;
diff --git a/drivers/common/qat/qat_qp.c b/drivers/common/qat/qat_qp.c
index 7ca7a45..1d83aac 100644
--- a/drivers/common/qat/qat_qp.c
+++ b/drivers/common/qat/qat_qp.c
@@ -90,6 +90,44 @@ const struct qat_qp_hw_data qat_gen1_qps[QAT_MAX_SERVICES]
}
};
+__extension__
+const struct qat_qp_hw_data qat_gen3_qps[QAT_MAX_SERVICES]
+ [ADF_MAX_QPS_ON_ANY_SERVICE] = {
+ /* queue pairs which provide an asymmetric crypto service */
+ [QAT_SERVICE_ASYMMETRIC] = {
+ {
+ .service_type = QAT_SERVICE_ASYMMETRIC,
+ .hw_bundle_num = 0,
+ .tx_ring_num = 0,
+ .rx_ring_num = 4,
+ .tx_msg_size = 64,
+ .rx_msg_size = 32,
+ }
+ },
+ /* queue pairs which provide a symmetric crypto service */
+ [QAT_SERVICE_SYMMETRIC] = {
+ {
+ .service_type = QAT_SERVICE_SYMMETRIC,
+ .hw_bundle_num = 0,
+ .tx_ring_num = 1,
+ .rx_ring_num = 5,
+ .tx_msg_size = 128,
+ .rx_msg_size = 32,
+ }
+ },
+ /* queue pairs which provide a compression service */
+ [QAT_SERVICE_COMPRESSION] = {
+ {
+ .service_type = QAT_SERVICE_COMPRESSION,
+ .hw_bundle_num = 0,
+ .tx_ring_num = 3,
+ .rx_ring_num = 7,
+ .tx_msg_size = 128,
+ .rx_msg_size = 32,
+ }
+ }
+};
+
static int qat_qp_check_queue_alignment(uint64_t phys_addr,
uint32_t queue_size_bytes);
static void qat_queue_delete(struct qat_queue *queue);
diff --git a/drivers/common/qat/qat_qp.h b/drivers/common/qat/qat_qp.h
index 69f8a61..6f1525e 100644
--- a/drivers/common/qat/qat_qp.h
+++ b/drivers/common/qat/qat_qp.h
@@ -85,6 +85,7 @@ struct qat_qp {
} __rte_cache_aligned;
extern const struct qat_qp_hw_data qat_gen1_qps[][ADF_MAX_QPS_ON_ANY_SERVICE];
+extern const struct qat_qp_hw_data qat_gen3_qps[][ADF_MAX_QPS_ON_ANY_SERVICE];
uint16_t
qat_enqueue_op_burst(void *qp, void **ops, uint16_t nb_ops);
diff --git a/drivers/compress/qat/qat_comp_pmd.c b/drivers/compress/qat/qat_comp_pmd.c
index 1b29540..6510cca 100644
--- a/drivers/compress/qat/qat_comp_pmd.c
+++ b/drivers/compress/qat/qat_comp_pmd.c
@@ -409,6 +409,7 @@ qat_comp_dev_create(struct qat_pci_device *qat_pci_dev)
switch (qat_pci_dev->qat_dev_gen) {
case QAT_GEN1:
case QAT_GEN2:
+ case QAT_GEN3:
comp_dev->qat_dev_capabilities = qat_comp_gen_capabilities;
break;
default:
diff --git a/drivers/crypto/qat/qat_sym_pmd.c b/drivers/crypto/qat/qat_sym_pmd.c
index fb93030..82fde16 100644
--- a/drivers/crypto/qat/qat_sym_pmd.c
+++ b/drivers/crypto/qat/qat_sym_pmd.c
@@ -292,6 +292,7 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev)
internals->qat_dev_capabilities = qat_gen1_sym_capabilities;
break;
case QAT_GEN2:
+ case QAT_GEN3:
internals->qat_dev_capabilities = qat_gen2_sym_capabilities;
break;
default:
--
2.7.4
next reply other threads:[~2018-10-01 21:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-01 21:17 Fiona Trahe [this message]
[not found] ` <348A99DA5F5B7549AA880327E580B435896468D5@IRSMSX101.ger.corp.intel.com>
2018-10-09 13:19 ` Jozwiak, TomaszX
2018-10-10 11:39 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1538428664-15776-1-git-send-email-fiona.trahe@intel.com \
--to=fiona.trahe@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
--cc=tomaszx.jozwiak@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).